Merge tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, the bulk of work in the SoC tree goes into DT files, this
  time with a roughly even split between 32-bit and 64-bit SoCs rather
  than the usual mostly 64-bit changes.

  New SoCs:

   - Microchip SAMA7 SoC family based on Cortex-A7, a new 32-bit
     platform based on the older SAMA5 series.

   - Qualcomm Snapdragon SDM636 and SM8150, variations of the existing
     phone SoCs.

   - Renesas R-Car H3e-2G and M3e-2G SoCs, variations of older Renesas
     SoCs.

  New boards:

   - Marvell CN913x reference boards

   - ASpeed AST2600 BMC implementations for Facebook Cloudripper, Elbert
     and Fuji server boards.

   - Snapdragon 665 based Sony Xperia 10II

   - Snapdragon MSM8916 based Xiaomi Redmi 2

   - Snapdragon MSM8226 based Samsung Galaxy S3 Neo

   - NXP i.MX based 32-bit boards:
       - DHCOM based PicoITX
       - DHSOM based DRC0ỉ
       - SolidRun SolidSense
       - SKOV i.MX6 boards.

   - NXP i.MX based 64-bit boards:
       - Nitrogen8 SoM and MNT Reform2
       - LS1088A based Traverse Ten64
       - i.MX8M based GW7902.

   - NVIDIA Jetson TX2 NX Developer Kit

   - 4KOpen STiH418-b2264 development board

   - ux500 based Samsung phones: Gavini, Codina and Kyle

   - TI AM335x based Sancloud BBE Lite

   - ixp4xx dts files to replace all old board files

  Other changes:

   - Treewide fixes for dtc warnings

   - Rockchips i/o domain support

   - TI OMAP/AM3 CPSW switch driver support

   - Improved device support for allwinner, aspeed, qualcomm, NXP,
     nvidia, Renesas, Samsung, Amlogic, Mediatek, ixp4xx, stm32, sti,
     OMAP and actions"

* tag 'dt-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (412 commits)
  arm/arm64: dts: Fix remaining dtc 'unit_address_format' warnings
  ARM: dts: rockchip: Add SFC to RV1108
  arm64: dts: marvell: armada-37xx: Extend PCIe MEM space
  ARM: dts: aspeed: p10bmc: Add power control pins
  ARM: dts: aspeed: cloudripper: Add comments for "mdio1"
  ARM: dts: aspeed: minipack: Update flash partition table
  dt-bindings: arm: fsl: Add Traverse Ten64 (LS1088A) board
  dt-bindings: vendor-prefixes: add Traverse Technologies
  arm64: dts: add device tree for Traverse Ten64 (LS1088A)
  arm64: dts: ls1088a: add missing PMU node
  arm64: dts: ls1088a: add internal PCS for DPMAC1 node
  ARM: dts: imx6qp-prtwd3: configure ENET_REF clock to 125MHz
  ARM: dts: vf610-zii-dev-rev-b: Remove #address-cells and #size-cells property from at93c46d dt node
  ARM: dts: add SKOV imx6q and imx6dl based boards
  dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
  dt-bindings: vendor-prefixes: Add an entry for SKOV A/S
  arm64: dts: imx8mq-reform2: add sound support
  arm64: dts: imx8m: drop interrupt-affinity for pmu
  arm64: dts: imx8qxp: update pmu compatible
  arm64: dts: imx8mm: update pmu compatible
  ...

2 files changed, 77 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
new file mode 100644
index 000000000000..46bb121360dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/aspeed,sgpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed SGPIO controller
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description:
+  This SGPIO controller is for ASPEED AST2400, AST2500 and AST2600 SoC,
+  AST2600 have two sgpio master one with 128 pins another one with 80 pins,
+  AST2500/AST2400 have one sgpio master with 80 pins. Each of the Serial
+  GPIO pins can be programmed to support the following options
+  - Support interrupt option for each input port and various interrupt
+    sensitivity option (level-high, level-low, edge-high, edge-low)
+  - Support reset tolerance option for each output port
+  - Directly connected to APB bus and its shift clock is from APB bus clock
+    divided by a programmable value.
+  - Co-work with external signal-chained TTL components (74LV165/74LV595)
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-sgpio
+      - aspeed,ast2500-sgpio
+      - aspeed,ast2600-sgpiom
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  clocks:
+    maxItems: 1
+
+  ngpios: true
+
+  bus-frequency: true
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - interrupts
+  - interrupt-controller
+  - ngpios
+  - clocks
+  - bus-frequency
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/aspeed-clock.h>
+    sgpio: sgpio@1e780200 {
+        #gpio-cells = <2>;
+        compatible = "aspeed,ast2500-sgpio";
+        gpio-controller;
+        interrupts = <40>;
+        reg = <0x1e780200 0x0100>;
+        clocks = <&syscon ASPEED_CLK_APB>;
+        interrupt-controller;
+        ngpios = <80>;
+        bus-frequency = <12000000>;
+    };
diff --git a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
deleted file mode 100644
index be329ea4794f..000000000000
--- a/Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Aspeed SGPIO controller Device Tree Bindings
---------------------------------------------
-
-This SGPIO controller is for ASPEED AST2500 SoC, it supports up to 80 full
-featured Serial GPIOs. Each of the Serial GPIO pins can be programmed to
-support the following options:
-- Support interrupt option for each input port and various interrupt
-  sensitivity option (level-high, level-low, edge-high, edge-low)
-- Support reset tolerance option for each output port
-- Directly connected to APB bus and its shift clock is from APB bus clock
-  divided by a programmable value.
-- Co-work with external signal-chained TTL components (74LV165/74LV595)
-
-Required properties:
-
-- compatible : Should be one of
-  "aspeed,ast2400-sgpio", "aspeed,ast2500-sgpio"
-- #gpio-cells : Should be 2, see gpio.txt
-- reg : Address and length of the register set for the device
-- gpio-controller : Marks the device node as a GPIO controller
-- interrupts : Interrupt specifier, see interrupt-controller/interrupts.txt
-- interrupt-controller : Mark the GPIO controller as an interrupt-controller
-- ngpios : number of *hardware* GPIO lines, see gpio.txt. This will expose
-  2 software GPIOs per hardware GPIO: one for hardware input, one for hardware
-  output. Up to 80 pins, must be a multiple of 8.
-- clocks : A phandle to the APB clock for SGPM clock division
-- bus-frequency : SGPM CLK frequency
-
-The sgpio and interrupt properties are further described in their respective
-bindings documentation:
-
-- Documentation/devicetree/bindings/gpio/gpio.txt
-- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-  Example:
-	sgpio: sgpio@1e780200 {
-		#gpio-cells = <2>;
-		compatible = "aspeed,ast2500-sgpio";
-		gpio-controller;
-		interrupts = <40>;
-		reg = <0x1e780200 0x0100>;
-		clocks = <&syscon ASPEED_CLK_APB>;
-		interrupt-controller;
-		ngpios = <8>;
-		bus-frequency = <12000000>;
-	};