Merge tag 'tilcdc-4.10' of https://github.com/jsarha/linux into drm-next

tilcdc changes for v4.10

* tag 'tilcdc-4.10' of https://github.com/jsarha/linux: (23 commits)
  drm/tilcdc: fix parsing of some DT properties
  drm/tilcdc: Enable frame done irq and functionality for LCDC rev 1
  drm/tilcdc: Configure video mode to HW in enable() not in mode_set_nofb()
  drm/tilcdc: Load palette at the end of mode_set_nofb()
  drm/tilcdc: Add timeout wait for palette loading to complete
  drm/tilcdc: Enable palette loading for revision 2 LCDC too
  drm/tilcdc: Fix load mode bit-field setting in tilcdc_crtc_enable()
  drm/tilcdc: Add tilcdc_write_mask() to tilcdc_regs.h
  drm/tilcdc: Fix tilcdc_crtc_create() return value handling
  drm/tilcdc: implement palette loading for rev1
  drm/tilcdc: Enable sync lost error and recovery handling for rev 1 LCDC
  drm/tilcdc: Add drm bridge support for attaching drm bridge drivers
  drm/bridge: Add ti-tfp410 DVI transmitter driver
  dt-bindings: Move "ti,tfp410.txt" from display/ti to display/bridge
  drm/tilcdc: Recover from sync lost error flood by resetting the LCDC
  drm/tilcdc: Fix race from forced shutdown of crtc in unload
  drm/tilcdc: Use unload to handle initialization failures
  drm/tilcdc: Stop using struct drm_driver load() callback
  drm/tilcdc: Remove obsolete drm_connector_register() calls
  drm/tilcdc: Correct misspelling in error message
  ...

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
new file mode 100644
index 000000000000..54d7e31525ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.txt
@@ -0,0 +1,46 @@
+TFP410 DPI to DVI encoder
+=========================
+
+Required properties:
+- compatible: "ti,tfp410"
+
+Optional properties:
+- powerdown-gpios: power-down gpio
+- reg: I2C address. If and only if present the device node
+       should be placed into the i2c controller node where the
+       tfp410 i2c is connected to.
+
+Required nodes:
+- Video port 0 for DPI input [1].
+- Video port 1 for DVI output [1].
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example
+-------
+
+tfp410: encoder@0 {
+	compatible = "ti,tfp410";
+	powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tfp410_in: endpoint@0 {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			tfp410_out: endpoint@0 {
+				remote-endpoint = <&dvi_connector_in>;
+			};
+		};
+	};
+};