Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "As usual, this is where the bulk of our changes end up landing each
  merge window.

  The individual updates are too many to enumerate, many many platforms
  have seen additions of device descriptions such that they are
  functionally more complete (in fact, this is often the bulk of updates
  we see).

  Instead I've mostly focused on highlighting the new platforms below as
  they are introduced. Sometimes the introduction is of mostly a
  fragment, that later gets filled in on later releases, and in some
  cases it's near-complete platform support. The latter is more common
  for derivative platforms that already has similar support in-tree.

  Two SoCs are slight outliers from the usual range of additions.
  Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
  in the Lychee Pi Nano platform. At the other end is NXP Layerscape
  LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
  aimed at infrastructure/networking.

  TI updates stick out in the diff stats too, in particular because they
  have moved the description of their L4 on-chip interconnect to
  devicetree, which opens up for removal of even more of their
  platform-specific 'hwmod' description tables over the next few
  releases.

  SoCs:
   - Qualcomm QCS404 (4x Cortex-A53)
   - Allwinner T3 (rebranded R40) and f1c100s (armv5)
   - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4)
   - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72)

  New platforms:
   - Rockchip: Gru Scarlet (RK3188 Tablet)
   - Amlogic: Phicomm N1 (S905D), Libretech S805-AC
   - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708)
   - Qualcomm: QCS404 base platform and EVB
   - Qualcomm: Remove of Arrow SD600
   - PXA: First PXA3xx DT board: Raumfeld
   - Aspeed: Facebook Backpack-CMM BMC
   - Renesas iWave G20D-Q7 (RZ/G1N)
   - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s)
   - Allwinner Emlid Neutis N5, Mapleboard MP130
   - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE)
   - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva
   - VF610: Liebherr's BK4 device, ZII SCU4 AIB board
   - i.MX7D PICO Hobbit baseboard
   - i.MX7ULP EVK board
   - NXP LX2160AQDS and LX2160ARDB boards

  Other:
   - Coresight binding updates across the board
   - CPU cooling maps updates across the board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits)
  ARM: dts: suniv: Fix improper bindings include patch
  ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards
  arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node
  ARM: dts: suniv: Fix improper bindings include patch
  arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  arm64: dts: Remove unused properties from FSL QSPI driver nodes
  ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller
  ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes
  ARM: dts: Remove unused properties from FSL QSPI driver nodes
  arm64: dts: ti: k3-am654: Enable main domain McSPI0
  arm64: dts: ti: k3-am654: Add McSPI DT nodes
  arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes
  arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM
  arm64: dts: ti: k3-am65-main: Add ECAP PWM node
  arm64: dts: ti: k3-am654-base-board: Add I2C nodes
  arm64: dts: ti: am654-base-board: Add pinmux for main uart0
  arm64: dts: ti: k3-am65: Add pinctrl regions
  dt-bindings: pinctrl: k3: Introduce pinmux definitions
  ARM: dts: exynos: Specify I2S assigned clocks in proper node
  ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2
  ...

1 files changed, 5 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
index e950599566a9..a6871953bf04 100644
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
@@ -9,6 +9,9 @@ Required Properties:
 		"amlogic,gxbb-clkc" for GXBB SoC,
 		"amlogic,gxl-clkc" for GXL and GXM SoC,
 		"amlogic,axg-clkc" for AXG SoC.
+- clocks : list of clock phandle, one for each entry clock-names.
+- clock-names : should contain the following:
+  * "xtal": the platform xtal
 
 - #clock-cells: should be 1.
 
@@ -31,6 +34,8 @@ sysctrl: system-controller@0 {
 	clkc: clock-controller {
 		#clock-cells = <1>;
 		compatible = "amlogic,gxbb-clkc";
+		clocks = <&xtal>;
+		clock-names = "xtal";
 	};
 };