Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

7 files changed, 83 insertions, 21 deletions

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
new file mode 100644
index 000000000000..44aa3c451ccf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-cpucfg.txt
@@ -0,0 +1,14 @@
+Freescale Vybrid Miscellaneous System Control - CPU Configuration
+
+The MSCM IP contains multiple sub modules, this binding describes the first
+block of registers which contains CPU configuration information.
+
+Required properties:
+- compatible:	"fsl,vf610-mscm-cpucfg", "syscon"
+- reg:		the register range of the MSCM CPU configuration registers
+
+Example:
+	mscm_cpucfg: cpucfg@40001000 {
+		compatible = "fsl,vf610-mscm-cpucfg", "syscon";
+		reg = <0x40001000 0x800>;
+	}
diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
new file mode 100644
index 000000000000..669808b2af49
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-mscm-ir.txt
@@ -0,0 +1,33 @@
+Freescale Vybrid Miscellaneous System Control - Interrupt Router
+
+The MSCM IP contains multiple sub modules, this binding describes the second
+block of registers which control the interrupt router. The interrupt router
+allows to configure the recipient of each peripheral interrupt. Furthermore
+it controls the directed processor interrupts. The module is available in all
+Vybrid SoC's but is only really useful in dual core configurations (VF6xx
+which comes with a Cortex-A5/Cortex-M4 combination).
+
+Required properties:
+- compatible:		"fsl,vf610-mscm-ir"
+- reg:			the register range of the MSCM Interrupt Router
+- fsl,cpucfg:		The handle to the MSCM CPU configuration node, required
+			to get the current CPU ID
+- interrupt-controller:	Identifies the node as an interrupt controller
+- #interrupt-cells:	Two cells, interrupt number and cells.
+			The hardware interrupt number according to interrupt
+			assignment of the interrupt router is required.
+			Flags get passed only when using GIC as parent. Flags
+			encoding as documented by the GIC bindings.
+- interrupt-parent:	Should be the phandle for the interrupt controller of
+			the CPU the device tree is intended to be used on. This
+			is either the node of the GIC or NVIC controller.
+
+Example:
+	mscm_ir: interrupt-controller@40001800 {
+		compatible = "fsl,vf610-mscm-ir";
+		reg = <0x40001800 0x400>;
+		fsl,cpucfg = <&mscm_cpucfg>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&intc>;
+	}
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index c97484b73e72..1e0d21201d3a 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -56,11 +56,6 @@ Optional
   regions, used when the GIC doesn't have banked registers. The offset is
   cpu-offset * cpu-nr.
 
-- arm,routable-irqs : Total number of gic irq inputs which are not directly
-		  connected from the peripherals, but are routed dynamically
-		  by a crossbar/multiplexer preceding the GIC. The GIC irq
-		  input line is assigned dynamically when the corresponding
-		  peripheral's crossbar line is mapped.
 Example:
 
 	intc: interrupt-controller@fff11000 {
@@ -68,7 +63,6 @@ Example:
 		#interrupt-cells = <3>;
 		#address-cells = <1>;
 		interrupt-controller;
-		arm,routable-irqs = <160>;
 		reg = <0xfff11000 0x1000>,
 		      <0xfff10100 0x100>;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index 4139db353d0a..a9b28d74d902 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -9,7 +9,9 @@ inputs.
 Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
-- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- interrupt-controller: indicates that this block is an interrupt controller.
+- interrupt-parent: the interrupt controller this block is connected to.
+- ti,max-irqs: Total number of irqs available at the parent interrupt controller.
 - ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
@@ -27,13 +29,13 @@ Optional properties:
   when the interrupt controller irq is unused (when not provided, default is 0)
 
 Examples:
-		crossbar_mpu: @4a020000 {
+		crossbar_mpu: crossbar@4a002a48 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
 			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
-			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
 			ti,irqs-skip = <10 133 139 140>;
 		};
 
@@ -44,10 +46,6 @@ Documentation/devicetree/bindings/arm/gic.txt for further details.
 
 An interrupt consumer on an SoC using crossbar will use:
 	interrupts = <GIC_SPI request_number interrupt_level>
-When the request number is between 0 to that described by
-"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
-request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
-quirky hardware mapping direct to GIC.
 
 Example:
 	device_x@0x4a023000 {
@@ -55,9 +53,3 @@ Example:
 		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		...
 	};
-
-	device_y@0x4a033000 {
-		/* Direct mapped GIC SPI 1 used */
-		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
-		...
-	};
diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt
index 75ef91d08f3b..3b5f5d1088c6 100644
--- a/Documentation/devicetree/bindings/arm/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/pmu.txt
@@ -18,12 +18,21 @@ Required properties:
 	"arm,arm11mpcore-pmu"
 	"arm,arm1176-pmu"
 	"arm,arm1136-pmu"
+	"qcom,scorpion-pmu"
+	"qcom,scorpion-mp-pmu"
 	"qcom,krait-pmu"
 - interrupts : 1 combined interrupt or 1 per core. If the interrupt is a per-cpu
                interrupt (PPI) then 1 interrupt should be specified.
 
 Optional properties:
 
+- interrupt-affinity : Valid only when using SPIs, specifies a list of phandles
+                       to CPU nodes corresponding directly to the affinity of
+		       the SPIs listed in the interrupts property.
+
+		       This property should be present when there is more than
+		       a single SPI.
+
 - qcom,no-pc-write : Indicates that this PMU doesn't support the 0xc and 0xd
                      events.
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 67b211381f2b..2d6356d8daf4 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -29,10 +29,27 @@ Properties:
  - clocks : list of phandles and specifiers to all input clocks listed in
 		clock-names property.
 
+Optional properties:
+
+Some PMUs are capable of behaving as an interrupt controller (mostly
+to wake up a suspended PMU). In which case, they can have the
+following properties:
+
+- interrupt-controller: indicate that said PMU is an interrupt controller
+
+- #interrupt-cells: must be identical to the that of the parent interrupt
+  controller.
+
+- interrupt-parent: a phandle indicating which interrupt controller
+  this PMU signals interrupts to.
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";
 	reg = <0x10040000 0x5000>;
+	interrupt-controller;
+	#interrupt-cells = <3>;
+	interrupt-parent = <&gic>;
 	#clock-cells = <1>;
 	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
 			"clkout4", "clkout8", "clkout9";
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
index 067c9790062f..9a4295b54539 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt
@@ -5,9 +5,12 @@ Required properties:
   Tegra30, must contain "nvidia,tegra30-ahb".  Otherwise, must contain
   '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124,
   tegra132, or tegra210.
-- reg : Should contain 1 register ranges(address and length)
+- reg : Should contain 1 register ranges(address and length).  For
+  Tegra20, Tegra30, and Tegra114 chips, the value must be <0x6000c004
+  0x10c>.  For Tegra124, Tegra132 and Tegra210 chips, the value should
+  be be <0x6000c000 0x150>.
 
-Example:
+Example (for a Tegra20 chip):
 	ahb: ahb@6000c004 {
 		compatible = "nvidia,tegra20-ahb";
 		reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */