Merge branch 'next' into for-linus

Prepare first round of input updates for 3.18.

23 files changed, 517 insertions, 49 deletions

diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt
new file mode 100644
index 000000000000..1d8af9e36065
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/adapteva.txt
@@ -0,0 +1,7 @@
+Adapteva Platforms Device Tree Bindings
+---------------------------------------
+
+Parallella board
+
+Required root node properties:
+    - compatible = "adapteva,parallella";
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards
index 3509707f9320..c554ed3d44fb 100644
--- a/Documentation/devicetree/bindings/arm/arm-boards
+++ b/Documentation/devicetree/bindings/arm/arm-boards
@@ -86,3 +86,9 @@ Interrupt controllers:
 	compatible = "arm,versatile-sic";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+Required nodes:
+
+- core-module: the root node to the Versatile platforms must have
+  a core-module with regs and the compatible strings
+  "arm,core-module-versatile", "syscon"
diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
new file mode 100644
index 000000000000..8781073029e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt
@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+  datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+	compatible = "marvell,armada-380-mpcore-soc-ctrl";
+	reg = <0x20d20 0x6c>;
+};
diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt
deleted file mode 100644
index 2742e9cfd6b1..000000000000
--- a/Documentation/devicetree/bindings/arm/atmel-aic.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-* Advanced Interrupt Controller (AIC)
-
-Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200" or "sama5d3"
-- interrupt-controller: Identifies the node as an interrupt controller.
-- interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
-  The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
-  The second cell is used to specify flags:
-    bits[3:0] trigger type and level flags:
-      1 = low-to-high edge triggered.
-      2 = high-to-low edge triggered.
-      4 = active high level-sensitive.
-      8 = active low level-sensitive.
-      Valid combinations are 1, 2, 3, 4, 8.
-      Default flag for internal sources should be set to 4 (active high).
-  The third cell is used to specify the irq priority from 0 (lowest) to 7
-  (highest).
-- reg: Should contain AIC registers location and length
-- atmel,external-irqs: u32 array of external irqs.
-
-Examples:
-	/*
-	 * AIC
-	 */
-	aic: interrupt-controller@fffff000 {
-		compatible = "atmel,at91rm9200-aic";
-		interrupt-controller;
-		interrupt-parent;
-		#interrupt-cells = <3>;
-		reg = <0xfffff000 0x200>;
-	};
-
-	/*
-	 * An interrupt generating device that is wired to an AIC.
-	 */
-	dma: dma-controller@ffffec00 {
-		compatible = "atmel,at91sam9g45-dma";
-		reg = <0xffffec00 0x200>;
-		interrupts = <21 4 5>;
-	};
diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
index 389bed5056e8..795cc78543fe 100644
--- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -1,7 +1,10 @@
 * Power Management Controller (PMC)
 
 Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+	<chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+	at91sam9x5, sama5d3
+
 - reg: Should contain PMC registers location and length
 
 Examples:
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
new file mode 100644
index 000000000000..8240c023e202
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method
@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+  - enable-method = "brcm,bcm11351-cpu-method";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x3500417c>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
new file mode 100644
index 000000000000..3c436cc4f35d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+    #address-cells = <2>;
+    #size-cells = <2>;
+    model = "Broadcom STB (bcm7445)";
+    compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+    rdb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "simple-bus";
+        ranges = <0 0x00 0xf0000000 0x1000000>;
+
+        sun_top_ctrl: syscon@404000 {
+            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+            reg = <0x404000 0x51c>;
+        };
+
+        hif_cpubiuctrl: syscon@3e2400 {
+            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            reg = <0x3e2400 0x5b4>;
+        };
+
+        hif_continuation: syscon@452000 {
+            compatible = "brcm,bcm7445-hif-continuation", "syscon";
+            reg = <0x452000 0x100>;
+        };
+    };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+    - compatible
+        The string "brcm,brcmstb-smpboot".
+
+    - syscon-cpu
+        A phandle / integer array property which lets the BSP know the location
+        of certain CPU power-on registers.
+
+        The layout of the property is as follows:
+            o a phandle to the "hif_cpubiuctrl" syscon node
+            o offset to the base CPU power zone register
+            o offset to the base CPU reset register
+
+    - syscon-cont
+        A phandle pointing to the syscon node which describes the CPU boot
+        continuation registers.
+            o a phandle to the "hif_continuation" syscon node
+
+example:
+    smpboot {
+        compatible = "brcm,brcmstb-smpboot";
+        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+        syscon-cont = <&hif_continuation>;
+    };
+
+reboot
+-------
+Required properties
+
+    - compatible
+        The string property "brcm,brcmstb-reboot".
+
+    - syscon
+        A phandle / integer array that points to the syscon node which describes
+        the general system reset registers.
+            o a phandle to "sun_top_ctrl"
+            o offset to the "reset source enable" register
+            o offset to the "software master reset" register
+
+example:
+    reboot {
+        compatible = "brcm,brcmstb-reboot";
+        syscon = <&sun_top_ctrl 0x304 0x308>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt
new file mode 100644
index 000000000000..b100d3847d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/ccn.txt
@@ -0,0 +1,21 @@
+* ARM CCN (Cache Coherent Network)
+
+Required properties:
+
+- compatible: (standard compatible string) should be one of:
+	"arm,ccn-504"
+	"arm,ccn-508"
+
+- reg: (standard registers property) physical address and size
+	(16MB) of the configuration registers block
+
+- interrupts: (standard interrupt property) single interrupt
+	generated by the control block
+
+Example:
+
+	ccn@0x2000000000 {
+		compatible = "arm,ccn-504";
+		reg = <0x20 0x00000000 0 0x1000000>;
+		interrupts = <0 181 4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
new file mode 100644
index 000000000000..cd236b727e2a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp
@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name:	"marvell,berlin-smp"
+Compatible machines:	"marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs:	"marvell,pj4b" and "arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+--
+[1] arm/marvell,berlin.txt
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 1fe72a0778cd..298e2f6b33c6 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -152,7 +152,9 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-a7"
 			    "arm,cortex-a8"
 			    "arm,cortex-a9"
+			    "arm,cortex-a12"
 			    "arm,cortex-a15"
+			    "arm,cortex-a17"
 			    "arm,cortex-a53"
 			    "arm,cortex-a57"
 			    "arm,cortex-m0"
@@ -163,6 +165,7 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-r4"
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
+			    "brcm,brahma-b15"
 			    "faraday,fa526"
 			    "intel,sa110"
 			    "intel,sa1100"
@@ -184,6 +187,7 @@ nodes to be present and contain the properties described below.
 			  can be one of:
 			    "allwinner,sun6i-a31"
 			    "arm,psci"
+			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"
 			    "marvell,armada-380-smp"
 			    "marvell,armada-xp-smp"
diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt
new file mode 100644
index 000000000000..33cd05e6c125
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic-v3.txt
@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain  "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. Must be a single cell with a value of at least 3.
+
+  The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+  interrupts. Other values are reserved for future use.
+
+  The 2nd cell contains the interrupt number for the interrupt type.
+  SPI interrupts are in the range [0-987]. PPI interrupts are in the
+  range [0-15].
+
+  The 3rd cell is the flags, encoded as follows:
+	bits[3:0] trigger type and level flags.
+		1 = edge triggered
+		4 = level triggered
+
+  Cells 4 and beyond are reserved for future use. When the 1st cell
+  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+  ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+  registers, in the following order:
+  - GIC Distributor interface (GICD)
+  - GIC Redistributors (GICR), one range per redistributor region
+  - GIC CPU interface (GICC)
+  - GIC Hypervisor interface (GICH)
+  - GIC Virtual CPU interface (GICV)
+
+  GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+  of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+  occupied by the redistributors. Required if more than one such
+  region is present.
+
+Examples:
+
+	gic: interrupt-controller@2cf00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c020000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		redistributor-stride = <0x0 0x40000>;	// 256kB stride
+		#redistributor-regions = <2>;
+		reg = <0x0 0x2c010000 0 0x10000>,	// GICD
+		      <0x0 0x2d000000 0 0x800000>,	// GICR 1: CPUs 0-31
+		      <0x0 0x2e000000 0 0x800000>;	// GICR 2: CPUs 32-63
+		      <0x0 0x2c040000 0 0x2000>,	// GICC
+		      <0x0 0x2c060000 0 0x2000>,	// GICH
+		      <0x0 0x2c080000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt
index 5573c08d3180..c7d2fa156678 100644
--- a/Documentation/devicetree/bindings/arm/gic.txt
+++ b/Documentation/devicetree/bindings/arm/gic.txt
@@ -16,6 +16,7 @@ Main node required properties:
 	"arm,cortex-a9-gic"
 	"arm,cortex-a7-gic"
 	"arm,arm11mp-gic"
+	"brcm,brahma-b15-gic"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index df0a452b8526..934f00025cc4 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -31,6 +31,17 @@ Example:
 		reboot-offset = <0x4>;
 	};
 
+-----------------------------------------------------------------------
+Hisilicon CPU controller
+
+Required properties:
+- compatible : "hisilicon,cpuctrl"
+- reg : Register address and size
+
+The clock registers and power registers of secondary cores are defined
+in CPU controller, especially in HIX5HD2 SoC.
+
+-----------------------------------------------------------------------
 PCTRL: Peripheral misc control register
 
 Required Properties:
diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
index 94013a9a8769..904de5781f44 100644
--- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt
+++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt
@@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are:
 	...
 }
 
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+	compatible = "marvell,berlin-cpu-ctrl";
+	reg = <0xf7dd0000 0x10000>;
+};
+
 * Marvell Berlin2 chip control binding
 
 Marvell Berlin SoCs have a chip control register set providing several
diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt
new file mode 100644
index 000000000000..d6ac71f37314
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek.txt
@@ -0,0 +1,8 @@
+Mediatek MT6589 Platforms Device Tree Bindings
+
+Boards with a SoC of the Mediatek MT6589 shall have the following property:
+
+Required root node property:
+
+compatible: must contain "mediatek,mt6589"
+
diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
index fb88585cfb93..4139db353d0a 100644
--- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt
+++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt
@@ -10,6 +10,7 @@ Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
 - ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
 - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@ Required properties:
 		 so crossbar bar driver should not consider them as free
 		 lines.
 
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
 Examples:
 		crossbar_mpu: @4a020000 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
 			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-skip = <10 133 139 140>;
 		};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+	interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+	device_x@0x4a023000 {
+		/* Crossbar 8 used */
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
+
+	device_y@0x4a033000 {
+		/* Direct mapped GIC SPI 1 used */
+		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index d22b216f5d23..0edc90305dfe 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -129,6 +129,9 @@ Boards:
 - AM437x GP EVM
   compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
 
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 
diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt
new file mode 100644
index 000000000000..79074dac684a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt
@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prcm"
+		"ti,am3-scrm"
+		"ti,am4-prcm"
+		"ti,am4-scrm"
+		"ti,omap2-prcm"
+		"ti,omap2-scrm"
+		"ti,omap3-prm"
+		"ti,omap3-cm"
+		"ti,omap3-scrm"
+		"ti,omap4-cm1"
+		"ti,omap4-prm"
+		"ti,omap4-cm2"
+		"ti,omap4-scrm"
+		"ti,omap5-prm"
+		"ti,omap5-cm-core-aon"
+		"ti,omap5-scrm"
+		"ti,omap5-cm-core"
+		"ti,dra7-prm"
+		"ti,dra7-cm-core-aon"
+		"ti,dra7-cm-core"
+- reg:		Contains PRCM module register address range
+		(base address and length)
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+	compatible = "ti,omap3-cm";
+	reg = <0x48004000 0x4000>;
+
+	cm_clocks: clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	cm_clockdomains: clockdomains {
+	};
+}
+
+&cm_clocks {
+	omap2_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 832fe8cc24d7..adc61b095bd1 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -14,14 +14,21 @@ Required properties:
 				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
+			Must be "samsung,exynos3250-adc" for
+				controllers compatible with ADC of Exynos3250.
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
 - #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock binding: handle to adc clock.
-- clock-names		From common clock binding: Shall be "adc".
+- clocks		From common clock bindings: handles to clocks specified
+			in "clock-names" property, in the same order.
+- clock-names		From common clock bindings: list of clock input names
+			used by ADC block:
+			- "adc" : ADC bus clock
+			- "sclk" : ADC special clock (only for Exynos3250 and
+				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
 Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +48,20 @@ adc: adc@12D10000 {
 	vdd-supply = <&buck5_reg>;
 };
 
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
+	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	interrupts = <0 137 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+	clock-names = "adc", "sclk";
+
+	vdd-supply = <&buck5_reg>;
+};
 
 Example: Adding child nodes in dts file
 
diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
index 2a4ab046a8a1..1e1979b229ff 100644
--- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
@@ -7,13 +7,45 @@ Properties:
 		   - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
 		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
 		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
 		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
 		second value must be always "syscon".
 
  - reg : offset and length of the register set.
 
+ - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
+		The single specifier cell is used as index to list of clocks
+		provided by PMU, which is currently:
+			0 : SoC clock output (CLKOUT pin)
+
+ - clock-names : list of clock names for particular CLKOUT mux inputs in
+		following format:
+			"clkoutN", where N is a decimal number corresponding to
+			CLKOUT mux control bits value for given input, e.g.
+				"clkout0", "clkout7", "clkout15".
+
+ - clocks : list of phandles and specifiers to all input clocks listed in
+		clock-names property.
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";
 	reg = <0x10040000 0x5000>;
+	#clock-cells = <1>;
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+Example of clock consumer :
+
+usb3503: usb3503@08 {
+	/* ... */
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	/* ... */
 };
diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt
new file mode 100644
index 000000000000..cf649827ffcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/spear-misc.txt
@@ -0,0 +1,9 @@
+SPEAr Misc configuration
+===========================
+SPEAr SOCs have some miscellaneous registers which are used to configure
+few properties of different peripheral controllers.
+
+misc node required properties:
+
+- compatible Should be	"st,spear1340-misc", "syscon".
+- reg: Address range of misc space upto 8K
diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt
index 558ed4b4ef39..73278c6d2dc3 100644
--- a/Documentation/devicetree/bindings/arm/tegra.txt
+++ b/Documentation/devicetree/bindings/arm/tegra.txt
@@ -30,6 +30,8 @@ board-specific compatible values:
   nvidia,seaboard
   nvidia,ventana
   nvidia,whistler
+  toradex,apalis_t30
+  toradex,apalis_t30-eval
   toradex,colibri_t20-512
   toradex,iris
 
diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt
index 6f1ed830b4f7..1f7995357888 100644
--- a/Documentation/devicetree/bindings/arm/xilinx.txt
+++ b/Documentation/devicetree/bindings/arm/xilinx.txt
@@ -1,7 +1,7 @@
-Xilinx Zynq EP107 Emulation Platform board
+Xilinx Zynq Platforms Device Tree Bindings
 
-This board is an emulation platform for the Zynq product which is
-based on an ARM Cortex A9 processor.
+Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor
+shall have the following properties.
 
 Required root node properties:
-    - compatible = "xlnx,zynq-ep107";
+    - compatible = "xlnx,zynq-7000";