dt-bindings: brcm: rationalize Broadcom documentation naming

This patchset attempts to standardize the naming of dt-bindings
documents based on the Broadcom vendor prefix of brcm.

Although there are no guidelines currently present for how to name
the dt-bindings document the "vendor,binding.txt" style is in use by
some of the other vendors.

Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Scott Branden <sbranden@broadcom.com>
Signed-off-by: Rob Herring <robh@kernel.org>

1 files changed, 0 insertions, 97 deletions

diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
deleted file mode 100644
index 430608ec09f0..000000000000
--- a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-ARM Broadcom STB platforms Device Tree Bindings
------------------------------------------------
-Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
-SoC shall have the following DT organization:
-
-Required root node properties:
-    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
-
-example:
-/ {
-    #address-cells = <2>;
-    #size-cells = <2>;
-    model = "Broadcom STB (bcm7445)";
-    compatible = "brcm,bcm7445", "brcm,brcmstb";
-
-Further, syscon nodes that map platform-specific registers used for general
-system control is required:
-
-    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
-    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
-    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
-
-example:
-    rdb {
-        #address-cells = <1>;
-        #size-cells = <1>;
-        compatible = "simple-bus";
-        ranges = <0 0x00 0xf0000000 0x1000000>;
-
-        sun_top_ctrl: syscon@404000 {
-            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
-            reg = <0x404000 0x51c>;
-        };
-
-        hif_cpubiuctrl: syscon@3e2400 {
-            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
-            reg = <0x3e2400 0x5b4>;
-        };
-
-        hif_continuation: syscon@452000 {
-            compatible = "brcm,bcm7445-hif-continuation", "syscon";
-            reg = <0x452000 0x100>;
-        };
-    };
-
-Lastly, nodes that allow for support of SMP initialization and reboot are
-required:
-
-smpboot
--------
-Required properties:
-
-    - compatible
-        The string "brcm,brcmstb-smpboot".
-
-    - syscon-cpu
-        A phandle / integer array property which lets the BSP know the location
-        of certain CPU power-on registers.
-
-        The layout of the property is as follows:
-            o a phandle to the "hif_cpubiuctrl" syscon node
-            o offset to the base CPU power zone register
-            o offset to the base CPU reset register
-
-    - syscon-cont
-        A phandle pointing to the syscon node which describes the CPU boot
-        continuation registers.
-            o a phandle to the "hif_continuation" syscon node
-
-example:
-    smpboot {
-        compatible = "brcm,brcmstb-smpboot";
-        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
-        syscon-cont = <&hif_continuation>;
-    };
-
-reboot
--------
-Required properties
-
-    - compatible
-        The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
-        the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
-        chips with the old SUN_TOP_CTRL interface.
-
-    - syscon
-        A phandle / integer array that points to the syscon node which describes
-        the general system reset registers.
-            o a phandle to "sun_top_ctrl"
-            o offset to the "reset source enable" register
-            o offset to the "software master reset" register
-
-example:
-    reboot {
-        compatible = "brcm,brcmstb-reboot";
-        syscon = <&sun_top_ctrl 0x304 0x308>;
-    };