docs: device-mapper: move it to the admin-guide

The DM support describes lots of aspects related to mapped
disk partitions from the userspace PoV.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

30 files changed, 4389 insertions, 0 deletions

diff --git a/Documentation/admin-guide/device-mapper/cache-policies.rst b/Documentation/admin-guide/device-mapper/cache-policies.rst
new file mode 100644
index 000000000000..b17fe352fc41
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/cache-policies.rst
@@ -0,0 +1,131 @@
+=============================
+Guidance for writing policies
+=============================
+
+Try to keep transactionality out of it.  The core is careful to
+avoid asking about anything that is migrating.  This is a pain, but
+makes it easier to write the policies.
+
+Mappings are loaded into the policy at construction time.
+
+Every bio that is mapped by the target is referred to the policy.
+The policy can return a simple HIT or MISS or issue a migration.
+
+Currently there's no way for the policy to issue background work,
+e.g. to start writing back dirty blocks that are going to be evicted
+soon.
+
+Because we map bios, rather than requests it's easy for the policy
+to get fooled by many small bios.  For this reason the core target
+issues periodic ticks to the policy.  It's suggested that the policy
+doesn't update states (eg, hit counts) for a block more than once
+for each tick.  The core ticks by watching bios complete, and so
+trying to see when the io scheduler has let the ios run.
+
+
+Overview of supplied cache replacement policies
+===============================================
+
+multiqueue (mq)
+---------------
+
+This policy is now an alias for smq (see below).
+
+The following tunables are accepted, but have no effect::
+
+	'sequential_threshold <#nr_sequential_ios>'
+	'random_threshold <#nr_random_ios>'
+	'read_promote_adjustment <value>'
+	'write_promote_adjustment <value>'
+	'discard_promote_adjustment <value>'
+
+Stochastic multiqueue (smq)
+---------------------------
+
+This policy is the default.
+
+The stochastic multi-queue (smq) policy addresses some of the problems
+with the multiqueue (mq) policy.
+
+The smq policy (vs mq) offers the promise of less memory utilization,
+improved performance and increased adaptability in the face of changing
+workloads.  smq also does not have any cumbersome tuning knobs.
+
+Users may switch from "mq" to "smq" simply by appropriately reloading a
+DM table that is using the cache target.  Doing so will cause all of the
+mq policy's hints to be dropped.  Also, performance of the cache may
+degrade slightly until smq recalculates the origin device's hotspots
+that should be cached.
+
+Memory usage
+^^^^^^^^^^^^
+
+The mq policy used a lot of memory; 88 bytes per cache block on a 64
+bit machine.
+
+smq uses 28bit indexes to implement its data structures rather than
+pointers.  It avoids storing an explicit hit count for each block.  It
+has a 'hotspot' queue, rather than a pre-cache, which uses a quarter of
+the entries (each hotspot block covers a larger area than a single
+cache block).
+
+All this means smq uses ~25bytes per cache block.  Still a lot of
+memory, but a substantial improvement nontheless.
+
+Level balancing
+^^^^^^^^^^^^^^^
+
+mq placed entries in different levels of the multiqueue structures
+based on their hit count (~ln(hit count)).  This meant the bottom
+levels generally had the most entries, and the top ones had very
+few.  Having unbalanced levels like this reduced the efficacy of the
+multiqueue.
+
+smq does not maintain a hit count, instead it swaps hit entries with
+the least recently used entry from the level above.  The overall
+ordering being a side effect of this stochastic process.  With this
+scheme we can decide how many entries occupy each multiqueue level,
+resulting in better promotion/demotion decisions.
+
+Adaptability:
+The mq policy maintained a hit count for each cache block.  For a
+different block to get promoted to the cache its hit count has to
+exceed the lowest currently in the cache.  This meant it could take a
+long time for the cache to adapt between varying IO patterns.
+
+smq doesn't maintain hit counts, so a lot of this problem just goes
+away.  In addition it tracks performance of the hotspot queue, which
+is used to decide which blocks to promote.  If the hotspot queue is
+performing badly then it starts moving entries more quickly between
+levels.  This lets it adapt to new IO patterns very quickly.
+
+Performance
+^^^^^^^^^^^
+
+Testing smq shows substantially better performance than mq.
+
+cleaner
+-------
+
+The cleaner writes back all dirty blocks in a cache to decommission it.
+
+Examples
+========
+
+The syntax for a table is::
+
+	cache <metadata dev> <cache dev> <origin dev> <block size>
+	<#feature_args> [<feature arg>]*
+	<policy> <#policy_args> [<policy arg>]*
+
+The syntax to send a message using the dmsetup command is::
+
+	dmsetup message <mapped device> 0 sequential_threshold 1024
+	dmsetup message <mapped device> 0 random_threshold 8
+
+Using dmsetup::
+
+	dmsetup create blah --table "0 268435456 cache /dev/sdb /dev/sdc \
+	    /dev/sdd 512 0 mq 4 sequential_threshold 1024 random_threshold 8"
+	creates a 128GB large mapped device named 'blah' with the
+	sequential threshold set to 1024 and the random_threshold set to 8.
diff --git a/Documentation/admin-guide/device-mapper/cache.rst b/Documentation/admin-guide/device-mapper/cache.rst
new file mode 100644
index 000000000000..f15e5254d05b
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/cache.rst
@@ -0,0 +1,337 @@
+=====
+Cache
+=====
+
+Introduction
+============
+
+dm-cache is a device mapper target written by Joe Thornber, Heinz
+Mauelshagen, and Mike Snitzer.
+
+It aims to improve performance of a block device (eg, a spindle) by
+dynamically migrating some of its data to a faster, smaller device
+(eg, an SSD).
+
+This device-mapper solution allows us to insert this caching at
+different levels of the dm stack, for instance above the data device for
+a thin-provisioning pool.  Caching solutions that are integrated more
+closely with the virtual memory system should give better performance.
+
+The target reuses the metadata library used in the thin-provisioning
+library.
+
+The decision as to what data to migrate and when is left to a plug-in
+policy module.  Several of these have been written as we experiment,
+and we hope other people will contribute others for specific io
+scenarios (eg. a vm image server).
+
+Glossary
+========
+
+  Migration
+	       Movement of the primary copy of a logical block from one
+	       device to the other.
+  Promotion
+	       Migration from slow device to fast device.
+  Demotion
+	       Migration from fast device to slow device.
+
+The origin device always contains a copy of the logical block, which
+may be out of date or kept in sync with the copy on the cache device
+(depending on policy).
+
+Design
+======
+
+Sub-devices
+-----------
+
+The target is constructed by passing three devices to it (along with
+other parameters detailed later):
+
+1. An origin device - the big, slow one.
+
+2. A cache device - the small, fast one.
+
+3. A small metadata device - records which blocks are in the cache,
+   which are dirty, and extra hints for use by the policy object.
+   This information could be put on the cache device, but having it
+   separate allows the volume manager to configure it differently,
+   e.g. as a mirror for extra robustness.  This metadata device may only
+   be used by a single cache device.
+
+Fixed block size
+----------------
+
+The origin is divided up into blocks of a fixed size.  This block size
+is configurable when you first create the cache.  Typically we've been
+using block sizes of 256KB - 1024KB.  The block size must be between 64
+sectors (32KB) and 2097152 sectors (1GB) and a multiple of 64 sectors (32KB).
+
+Having a fixed block size simplifies the target a lot.  But it is
+something of a compromise.  For instance, a small part of a block may be
+getting hit a lot, yet the whole block will be promoted to the cache.
+So large block sizes are bad because they waste cache space.  And small
+block sizes are bad because they increase the amount of metadata (both
+in core and on disk).
+
+Cache operating modes
+---------------------
+
+The cache has three operating modes: writeback, writethrough and
+passthrough.
+
+If writeback, the default, is selected then a write to a block that is
+cached will go only to the cache and the block will be marked dirty in
+the metadata.
+
+If writethrough is selected then a write to a cached block will not
+complete until it has hit both the origin and cache devices.  Clean
+blocks should remain clean.
+
+If passthrough is selected, useful when the cache contents are not known
+to be coherent with the origin device, then all reads are served from
+the origin device (all reads miss the cache) and all writes are
+forwarded to the origin device; additionally, write hits cause cache
+block invalidates.  To enable passthrough mode the cache must be clean.
+Passthrough mode allows a cache device to be activated without having to
+worry about coherency.  Coherency that exists is maintained, although
+the cache will gradually cool as writes take place.  If the coherency of
+the cache can later be verified, or established through use of the
+"invalidate_cblocks" message, the cache device can be transitioned to
+writethrough or writeback mode while still warm.  Otherwise, the cache
+contents can be discarded prior to transitioning to the desired
+operating mode.
+
+A simple cleaner policy is provided, which will clean (write back) all
+dirty blocks in a cache.  Useful for decommissioning a cache or when
+shrinking a cache.  Shrinking the cache's fast device requires all cache
+blocks, in the area of the cache being removed, to be clean.  If the
+area being removed from the cache still contains dirty blocks the resize
+will fail.  Care must be taken to never reduce the volume used for the
+cache's fast device until the cache is clean.  This is of particular
+importance if writeback mode is used.  Writethrough and passthrough
+modes already maintain a clean cache.  Future support to partially clean
+the cache, above a specified threshold, will allow for keeping the cache
+warm and in writeback mode during resize.
+
+Migration throttling
+--------------------
+
+Migrating data between the origin and cache device uses bandwidth.
+The user can set a throttle to prevent more than a certain amount of
+migration occurring at any one time.  Currently we're not taking any
+account of normal io traffic going to the devices.  More work needs
+doing here to avoid migrating during those peak io moments.
+
+For the time being, a message "migration_threshold <#sectors>"
+can be used to set the maximum number of sectors being migrated,
+the default being 2048 sectors (1MB).
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the cache behaves like a physical disk that has a volatile write
+cache.  If power is lost you may lose some recent writes.  The metadata
+should always be consistent in spite of any crash.
+
+The 'dirty' state for a cache block changes far too frequently for us
+to keep updating it on the fly.  So we treat it as a hint.  In normal
+operation it will be written when the dm device is suspended.  If the
+system crashes all cache blocks will be assumed dirty when restarted.
+
+Per-block policy hints
+----------------------
+
+Policy plug-ins can store a chunk of data per cache block.  It's up to
+the policy how big this chunk is, but it should be kept small.  Like the
+dirty flags this data is lost if there's a crash so a safe fallback
+value should always be possible.
+
+Policy hints affect performance, not correctness.
+
+Policy messaging
+----------------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  Refer to cache-policies.txt.
+
+Discard bitset resolution
+-------------------------
+
+We can avoid copying data during migration if we know the block has
+been discarded.  A prime example of this is when mkfs discards the
+whole block device.  We store a bitset tracking the discard state of
+blocks.  However, we allow this bitset to have a different block size
+from the cache blocks.  This is because we need to track the discard
+state for all of the origin device (compare with the dirty bitset
+which is just for the smaller cache device).
+
+Target interface
+================
+
+Constructor
+-----------
+
+  ::
+
+   cache <metadata dev> <cache dev> <origin dev> <block size>
+         <#feature args> [<feature arg>]*
+         <policy> <#policy args> [policy args]*
+
+ ================ =======================================================
+ metadata dev     fast device holding the persistent metadata
+ cache dev	  fast device holding cached data blocks
+ origin dev	  slow device holding original data blocks
+ block size       cache unit size in sectors
+
+ #feature args    number of feature arguments passed
+ feature args     writethrough or passthrough (The default is writeback.)
+
+ policy           the replacement policy to use
+ #policy args     an even number of arguments corresponding to
+                  key/value pairs passed to the policy
+ policy args      key/value pairs passed to the policy
+		  E.g. 'sequential_threshold 1024'
+		  See cache-policies.txt for details.
+ ================ =======================================================
+
+Optional feature arguments are:
+
+
+   ==================== ========================================================
+   writethrough		write through caching that prohibits cache block
+			content from being different from origin block content.
+			Without this argument, the default behaviour is to write
+			back cache block contents later for performance reasons,
+			so they may differ from the corresponding origin blocks.
+
+   passthrough		a degraded mode useful for various cache coherency
+			situations (e.g., rolling back snapshots of
+			underlying storage).	 Reads and writes always go to
+			the origin.	If a write goes to a cached origin
+			block, then the cache block is invalidated.
+			To enable passthrough mode the cache must be clean.
+
+   metadata2		use version 2 of the metadata.  This stores the dirty
+			bits in a separate btree, which improves speed of
+			shutting down the cache.
+
+   no_discard_passdown	disable passing down discards from the cache
+			to the origin's data device.
+   ==================== ========================================================
+
+A policy called 'default' is always registered.  This is an alias for
+the policy we currently think is giving best all round performance.
+
+As the default policy could vary between kernels, if you are relying on
+the characteristics of a specific policy, always request it by name.
+
+Status
+------
+
+::
+
+  <metadata block size> <#used metadata blocks>/<#total metadata blocks>
+  <cache block size> <#used cache blocks>/<#total cache blocks>
+  <#read hits> <#read misses> <#write hits> <#write misses>
+  <#demotions> <#promotions> <#dirty> <#features> <features>*
+  <#core args> <core args>* <policy name> <#policy args> <policy args>*
+  <cache metadata mode>
+
+
+========================= =====================================================
+metadata block size	  Fixed block size for each metadata block in
+			  sectors
+#used metadata blocks	  Number of metadata blocks used
+#total metadata blocks	  Total number of metadata blocks
+cache block size	  Configurable block size for the cache device
+			  in sectors
+#used cache blocks	  Number of blocks resident in the cache
+#total cache blocks	  Total number of cache blocks
+#read hits		  Number of times a READ bio has been mapped
+			  to the cache
+#read misses		  Number of times a READ bio has been mapped
+			  to the origin
+#write hits		  Number of times a WRITE bio has been mapped
+			  to the cache
+#write misses		  Number of times a WRITE bio has been
+			  mapped to the origin
+#demotions		  Number of times a block has been removed
+			  from the cache
+#promotions		  Number of times a block has been moved to
+			  the cache
+#dirty			  Number of blocks in the cache that differ
+			  from the origin
+#feature args		  Number of feature args to follow
+feature args		  'writethrough' (optional)
+#core args		  Number of core arguments (must be even)
+core args		  Key/value pairs for tuning the core
+			  e.g. migration_threshold
+policy name		  Name of the policy
+#policy args		  Number of policy arguments to follow (must be even)
+policy args		  Key/value pairs e.g. sequential_threshold
+cache metadata mode       ro if read-only, rw if read-write
+
+			  In serious cases where even a read-only mode is
+			  deemed unsafe no further I/O will be permitted and
+			  the status will just contain the string 'Fail'.
+			  The userspace recovery tools should then be used.
+needs_check		  'needs_check' if set, '-' if not set
+			  A metadata operation has failed, resulting in the
+			  needs_check flag being set in the metadata's
+			  superblock.  The metadata device must be
+			  deactivated and checked/repaired before the
+			  cache can be made fully operational again.
+			  '-' indicates	needs_check is not set.
+========================= =====================================================
+
+Messages
+--------
+
+Policies will have different tunables, specific to each one, so we
+need a generic way of getting and setting these.  Device-mapper
+messages are used.  (A sysfs interface would also be possible.)
+
+The message format is::
+
+   <key> <value>
+
+E.g.::
+
+   dmsetup message my_cache 0 sequential_threshold 1024
+
+
+Invalidation is removing an entry from the cache without writing it
+back.  Cache blocks can be invalidated via the invalidate_cblocks
+message, which takes an arbitrary number of cblock ranges.  Each cblock
+range's end value is "one past the end", meaning 5-10 expresses a range
+of values from 5 to 9.  Each cblock must be expressed as a decimal
+value, in the future a variant message that takes cblock ranges
+expressed in hexadecimal may be needed to better support efficient
+invalidation of larger caches.  The cache must be in passthrough mode
+when invalidate_cblocks is used::
+
+   invalidate_cblocks [<cblock>|<cblock begin>-<cblock end>]*
+
+E.g.::
+
+   dmsetup message my_cache 0 invalidate_cblocks 2345 3456-4567 5678-6789
+
+Examples
+========
+
+The test suite can be found here:
+
+https://github.com/jthornber/device-mapper-test-suite
+
+::
+
+  dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	  /dev/mapper/ssd /dev/mapper/origin 512 1 writeback default 0'
+  dmsetup create my_cache --table '0 41943040 cache /dev/mapper/metadata \
+	  /dev/mapper/ssd /dev/mapper/origin 1024 1 writeback \
+	  mq 4 sequential_threshold 1024 random_threshold 8'
diff --git a/Documentation/admin-guide/device-mapper/delay.rst b/Documentation/admin-guide/device-mapper/delay.rst
new file mode 100644
index 000000000000..917ba8c33359
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/delay.rst
@@ -0,0 +1,31 @@
+========
+dm-delay
+========
+
+Device-Mapper's "delay" target delays reads and/or writes
+and maps them to different devices.
+
+Parameters::
+
+    <device> <offset> <delay> [<write_device> <write_offset> <write_delay>
+			       [<flush_device> <flush_offset> <flush_delay>]]
+
+With separate write parameters, the first set is only used for reads.
+Offsets are specified in sectors.
+Delays are specified in milliseconds.
+
+Example scripts
+===============
+
+::
+
+	#!/bin/sh
+	# Create device delaying rw operation for 500ms
+	echo "0 `blockdev --getsz $1` delay $1 0 500" | dmsetup create delayed
+
+::
+
+	#!/bin/sh
+	# Create device delaying only write operation for 500ms and
+	# splitting reads and writes to different devices $1 $2
+	echo "0 `blockdev --getsz $1` delay $1 0 0 $2 0 500" | dmsetup create delayed
diff --git a/Documentation/admin-guide/device-mapper/dm-crypt.rst b/Documentation/admin-guide/device-mapper/dm-crypt.rst
new file mode 100644
index 000000000000..8f4a3f889d43
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-crypt.rst
@@ -0,0 +1,173 @@
+========
+dm-crypt
+========
+
+Device-Mapper's "crypt" target provides transparent encryption of block devices
+using the kernel crypto API.
+
+For a more detailed description of supported parameters see:
+https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt
+
+Parameters::
+
+	      <cipher> <key> <iv_offset> <device path> \
+	      <offset> [<#opt_params> <opt_params>]
+
+<cipher>
+    Encryption cipher, encryption mode and Initial Vector (IV) generator.
+
+    The cipher specifications format is::
+
+       cipher[:keycount]-chainmode-ivmode[:ivopts]
+
+    Examples::
+
+       aes-cbc-essiv:sha256
+       aes-xts-plain64
+       serpent-xts-plain64
+
+    Cipher format also supports direct specification with kernel crypt API
+    format (selected by capi: prefix). The IV specification is the same
+    as for the first format type.
+    This format is mainly used for specification of authenticated modes.
+
+    The crypto API cipher specifications format is::
+
+        capi:cipher_api_spec-ivmode[:ivopts]
+
+    Examples::
+
+        capi:cbc(aes)-essiv:sha256
+        capi:xts(aes)-plain64
+
+    Examples of authenticated modes::
+
+        capi:gcm(aes)-random
+        capi:authenc(hmac(sha256),xts(aes))-random
+        capi:rfc7539(chacha20,poly1305)-random
+
+    The /proc/crypto contains a list of curently loaded crypto modes.
+
+<key>
+    Key used for encryption. It is encoded either as a hexadecimal number
+    or it can be passed as <key_string> prefixed with single colon
+    character (':') for keys residing in kernel keyring service.
+    You can only use key sizes that are valid for the selected cipher
+    in combination with the selected iv mode.
+    Note that for some iv modes the key string can contain additional
+    keys (for example IV seed) so the key contains more parts concatenated
+    into a single string.
+
+<key_string>
+    The kernel keyring key is identified by string in following format:
+    <key_size>:<key_type>:<key_description>.
+
+<key_size>
+    The encryption key size in bytes. The kernel key payload size must match
+    the value passed in <key_size>.
+
+<key_type>
+    Either 'logon' or 'user' kernel key type.
+
+<key_description>
+    The kernel keyring key description crypt target should look for
+    when loading key of <key_type>.
+
+<keycount>
+    Multi-key compatibility mode. You can define <keycount> keys and
+    then sectors are encrypted according to their offsets (sector 0 uses key0;
+    sector 1 uses key1 etc.).  <keycount> must be a power of two.
+
+<iv_offset>
+    The IV offset is a sector count that is added to the sector number
+    before creating the IV.
+
+<device path>
+    This is the device that is going to be used as backend and contains the
+    encrypted data.  You can specify it as a path like /dev/xxx or a device
+    number <major>:<minor>.
+
+<offset>
+    Starting sector within the device where the encrypted data begins.
+
+<#opt_params>
+    Number of optional parameters. If there are no optional parameters,
+    the optional paramaters section can be skipped or #opt_params can be zero.
+    Otherwise #opt_params is the number of following arguments.
+
+    Example of optional parameters section:
+        3 allow_discards same_cpu_crypt submit_from_crypt_cpus
+
+allow_discards
+    Block discard requests (a.k.a. TRIM) are passed through the crypt device.
+    The default is to ignore discard requests.
+
+    WARNING: Assess the specific security risks carefully before enabling this
+    option.  For example, allowing discards on encrypted devices may lead to
+    the leak of information about the ciphertext device (filesystem type,
+    used space etc.) if the discarded blocks can be located easily on the
+    device later.
+
+same_cpu_crypt
+    Perform encryption using the same cpu that IO was submitted on.
+    The default is to use an unbound workqueue so that encryption work
+    is automatically balanced between available CPUs.
+
+submit_from_crypt_cpus
+    Disable offloading writes to a separate thread after encryption.
+    There are some situations where offloading write bios from the
+    encryption threads to a single thread degrades performance
+    significantly.  The default is to offload write bios to the same
+    thread because it benefits CFQ to have writes submitted using the
+    same context.
+
+integrity:<bytes>:<type>
+    The device requires additional <bytes> metadata per-sector stored
+    in per-bio integrity structure. This metadata must by provided
+    by underlying dm-integrity target.
+
+    The <type> can be "none" if metadata is used only for persistent IV.
+
+    For Authenticated Encryption with Additional Data (AEAD)
+    the <type> is "aead". An AEAD mode additionally calculates and verifies
+    integrity for the encrypted device. The additional space is then
+    used for storing authentication tag (and persistent IV if needed).
+
+sector_size:<bytes>
+    Use <bytes> as the encryption unit instead of 512 bytes sectors.
+    This option can be in range 512 - 4096 bytes and must be power of two.
+    Virtual device will announce this size as a minimal IO and logical sector.
+
+iv_large_sectors
+   IV generators will use sector number counted in <sector_size> units
+   instead of default 512 bytes sectors.
+
+   For example, if <sector_size> is 4096 bytes, plain64 IV for the second
+   sector will be 8 (without flag) and 1 if iv_large_sectors is present.
+   The <iv_offset> must be multiple of <sector_size> (in 512 bytes units)
+   if this flag is specified.
+
+Example scripts
+===============
+LUKS (Linux Unified Key Setup) is now the preferred way to set up disk
+encryption with dm-crypt using the 'cryptsetup' utility, see
+https://gitlab.com/cryptsetup/cryptsetup
+
+::
+
+	#!/bin/sh
+	# Create a crypt device using dmsetup
+	dmsetup create crypt1 --table "0 `blockdev --getsz $1` crypt aes-cbc-essiv:sha256 babebabebabebabebabebabebabebabe 0 $1 0"
+
+::
+
+	#!/bin/sh
+	# Create a crypt device using dmsetup when encryption key is stored in keyring service
+	dmsetup create crypt2 --table "0 `blockdev --getsize $1` crypt aes-cbc-essiv:sha256 :32:logon:my_prefix:my_key 0 $1 0"
+
+::
+
+	#!/bin/sh
+	# Create a crypt device using cryptsetup and LUKS header with default cipher
+	cryptsetup luksFormat $1
+	cryptsetup luksOpen $1 crypt1
diff --git a/Documentation/admin-guide/device-mapper/dm-dust.txt b/Documentation/admin-guide/device-mapper/dm-dust.txt
new file mode 100644
index 000000000000..954d402a1f6a
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-dust.txt
@@ -0,0 +1,272 @@
+dm-dust
+=======
+
+This target emulates the behavior of bad sectors at arbitrary
+locations, and the ability to enable the emulation of the failures
+at an arbitrary time.
+
+This target behaves similarly to a linear target.  At a given time,
+the user can send a message to the target to start failing read
+requests on specific blocks (to emulate the behavior of a hard disk
+drive with bad sectors).
+
+When the failure behavior is enabled (i.e.: when the output of
+"dmsetup status" displays "fail_read_on_bad_block"), reads of blocks
+in the "bad block list" will fail with EIO ("Input/output error").
+
+Writes of blocks in the "bad block list will result in the following:
+
+1. Remove the block from the "bad block list".
+2. Successfully complete the write.
+
+This emulates the "remapped sector" behavior of a drive with bad
+sectors.
+
+Normally, a drive that is encountering bad sectors will most likely
+encounter more bad sectors, at an unknown time or location.
+With dm-dust, the user can use the "addbadblock" and "removebadblock"
+messages to add arbitrary bad blocks at new locations, and the
+"enable" and "disable" messages to modulate the state of whether the
+configured "bad blocks" will be treated as bad, or bypassed.
+This allows the pre-writing of test data and metadata prior to
+simulating a "failure" event where bad sectors start to appear.
+
+Table parameters:
+-----------------
+<device_path> <offset> <blksz>
+
+Mandatory parameters:
+    <device_path>: path to the block device.
+    <offset>: offset to data area from start of device_path
+    <blksz>: block size in bytes
+	     (minimum 512, maximum 1073741824, must be a power of 2)
+
+Usage instructions:
+-------------------
+
+First, find the size (in 512-byte sectors) of the device to be used:
+
+$ sudo blockdev --getsz /dev/vdb1
+33552384
+
+Create the dm-dust device:
+(For a device with a block size of 512 bytes)
+$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 512'
+
+(For a device with a block size of 4096 bytes)
+$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 4096'
+
+Check the status of the read behavior ("bypass" indicates that all I/O
+will be passed through to the underlying device):
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 bypass
+
+$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=128 iflag=direct
+128+0 records in
+128+0 records out
+
+$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+128+0 records in
+128+0 records out
+
+Adding and removing bad blocks:
+-------------------------------
+
+At any time (i.e.: whether the device has the "bad block" emulation
+enabled or disabled), bad blocks may be added or removed from the
+device via the "addbadblock" and "removebadblock" messages:
+
+$ sudo dmsetup message dust1 0 addbadblock 60
+kernel: device-mapper: dust: badblock added at block 60
+
+$ sudo dmsetup message dust1 0 addbadblock 67
+kernel: device-mapper: dust: badblock added at block 67
+
+$ sudo dmsetup message dust1 0 addbadblock 72
+kernel: device-mapper: dust: badblock added at block 72
+
+These bad blocks will be stored in the "bad block list".
+While the device is in "bypass" mode, reads and writes will succeed:
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 bypass
+
+Enabling block read failures:
+-----------------------------
+
+To enable the "fail read on bad block" behavior, send the "enable" message:
+
+$ sudo dmsetup message dust1 0 enable
+kernel: device-mapper: dust: enabling read failures on bad sectors
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block
+
+With the device in "fail read on bad block" mode, attempting to read a
+block will encounter an "Input/output error":
+
+$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=1 skip=67 iflag=direct
+dd: error reading '/dev/mapper/dust1': Input/output error
+0+0 records in
+0+0 records out
+0 bytes copied, 0.00040651 s, 0.0 kB/s
+
+...and writing to the bad blocks will remove the blocks from the list,
+therefore emulating the "remap" behavior of hard disk drives:
+
+$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+128+0 records in
+128+0 records out
+
+kernel: device-mapper: dust: block 60 removed from badblocklist by write
+kernel: device-mapper: dust: block 67 removed from badblocklist by write
+kernel: device-mapper: dust: block 72 removed from badblocklist by write
+kernel: device-mapper: dust: block 87 removed from badblocklist by write
+
+Bad block add/remove error handling:
+------------------------------------
+
+Attempting to add a bad block that already exists in the list will
+result in an "Invalid argument" error, as well as a helpful message:
+
+$ sudo dmsetup message dust1 0 addbadblock 88
+device-mapper: message ioctl on dust1  failed: Invalid argument
+kernel: device-mapper: dust: block 88 already in badblocklist
+
+Attempting to remove a bad block that doesn't exist in the list will
+result in an "Invalid argument" error, as well as a helpful message:
+
+$ sudo dmsetup message dust1 0 removebadblock 87
+device-mapper: message ioctl on dust1  failed: Invalid argument
+kernel: device-mapper: dust: block 87 not found in badblocklist
+
+Counting the number of bad blocks in the bad block list:
+--------------------------------------------------------
+
+To count the number of bad blocks configured in the device, run the
+following message command:
+
+$ sudo dmsetup message dust1 0 countbadblocks
+
+A message will print with the number of bad blocks currently
+configured on the device:
+
+kernel: device-mapper: dust: countbadblocks: 895 badblock(s) found
+
+Querying for specific bad blocks:
+---------------------------------
+
+To find out if a specific block is in the bad block list, run the
+following message command:
+
+$ sudo dmsetup message dust1 0 queryblock 72
+
+The following message will print if the block is in the list:
+device-mapper: dust: queryblock: block 72 found in badblocklist
+
+The following message will print if the block is in the list:
+device-mapper: dust: queryblock: block 72 not found in badblocklist
+
+The "queryblock" message command will work in both the "enabled"
+and "disabled" modes, allowing the verification of whether a block
+will be treated as "bad" without having to issue I/O to the device,
+or having to "enable" the bad block emulation.
+
+Clearing the bad block list:
+----------------------------
+
+To clear the bad block list (without needing to individually run
+a "removebadblock" message command for every block), run the
+following message command:
+
+$ sudo dmsetup message dust1 0 clearbadblocks
+
+After clearing the bad block list, the following message will appear:
+
+kernel: device-mapper: dust: clearbadblocks: badblocks cleared
+
+If there were no bad blocks to clear, the following message will
+appear:
+
+kernel: device-mapper: dust: clearbadblocks: no badblocks found
+
+Message commands list:
+----------------------
+
+Below is a list of the messages that can be sent to a dust device:
+
+Operations on blocks (requires a <blknum> argument):
+
+addbadblock <blknum>
+queryblock <blknum>
+removebadblock <blknum>
+
+...where <blknum> is a block number within range of the device
+  (corresponding to the block size of the device.)
+
+Single argument message commands:
+
+countbadblocks
+clearbadblocks
+disable
+enable
+quiet
+
+Device removal:
+---------------
+
+When finished, remove the device via the "dmsetup remove" command:
+
+$ sudo dmsetup remove dust1
+
+Quiet mode:
+-----------
+
+On test runs with many bad blocks, it may be desirable to avoid
+excessive logging (from bad blocks added, removed, or "remapped").
+This can be done by enabling "quiet mode" via the following message:
+
+$ sudo dmsetup message dust1 0 quiet
+
+This will suppress log messages from add / remove / removed by write
+operations.  Log messages from "countbadblocks" or "queryblock"
+message commands will still print in quiet mode.
+
+The status of quiet mode can be seen by running "dmsetup status":
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block quiet
+
+To disable quiet mode, send the "quiet" message again:
+
+$ sudo dmsetup message dust1 0 quiet
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block verbose
+
+(The presence of "verbose" indicates normal logging.)
+
+"Why not...?"
+-------------
+
+scsi_debug has a "medium error" mode that can fail reads on one
+specified sector (sector 0x1234, hardcoded in the source code), but
+it uses RAM for the persistent storage, which drastically decreases
+the potential device size.
+
+dm-flakey fails all I/O from all block locations at a specified time
+frequency, and not a given point in time.
+
+When a bad sector occurs on a hard disk drive, reads to that sector
+are failed by the device, usually resulting in an error code of EIO
+("I/O error") or ENODATA ("No data available").  However, a write to
+the sector may succeed, and result in the sector becoming readable
+after the device controller no longer experiences errors reading the
+sector (or after a reallocation of the sector).  However, there may
+be bad sectors that occur on the device in the future, in a different,
+unpredictable location.
+
+This target seeks to provide a device that can exhibit the behavior
+of a bad sector at a known sector location, at a known time, based
+on a large storage device (at least tens of gigabytes, not occupying
+system memory).
diff --git a/Documentation/admin-guide/device-mapper/dm-flakey.rst b/Documentation/admin-guide/device-mapper/dm-flakey.rst
new file mode 100644
index 000000000000..86138735879d
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-flakey.rst
@@ -0,0 +1,74 @@
+=========
+dm-flakey
+=========
+
+This target is the same as the linear target except that it exhibits
+unreliable behaviour periodically.  It's been found useful in simulating
+failing devices for testing purposes.
+
+Starting from the time the table is loaded, the device is available for
+<up interval> seconds, then exhibits unreliable behaviour for <down
+interval> seconds, and then this cycle repeats.
+
+Also, consider using this in combination with the dm-delay target too,
+which can delay reads and writes and/or send them to different
+underlying devices.
+
+Table parameters
+----------------
+
+::
+
+  <dev path> <offset> <up interval> <down interval> \
+    [<num_features> [<feature arguments>]]
+
+Mandatory parameters:
+
+    <dev path>:
+        Full pathname to the underlying block-device, or a
+        "major:minor" device-number.
+    <offset>:
+        Starting sector within the device.
+    <up interval>:
+        Number of seconds device is available.
+    <down interval>:
+        Number of seconds device returns errors.
+
+Optional feature parameters:
+
+  If no feature parameters are present, during the periods of
+  unreliability, all I/O returns errors.
+
+  drop_writes:
+	All write I/O is silently ignored.
+	Read I/O is handled correctly.
+
+  error_writes:
+	All write I/O is failed with an error signalled.
+	Read I/O is handled correctly.
+
+  corrupt_bio_byte <Nth_byte> <direction> <value> <flags>:
+	During <down interval>, replace <Nth_byte> of the data of
+	each matching bio with <value>.
+
+    <Nth_byte>:
+	The offset of the byte to replace.
+	Counting starts at 1, to replace the first byte.
+    <direction>:
+	Either 'r' to corrupt reads or 'w' to corrupt writes.
+	'w' is incompatible with drop_writes.
+    <value>:
+	The value (from 0-255) to write.
+    <flags>:
+	Perform the replacement only if bio->bi_opf has all the
+	selected flags set.
+
+Examples:
+
+Replaces the 32nd byte of READ bios with the value 1::
+
+  corrupt_bio_byte 32 r 1 0
+
+Replaces the 224th byte of REQ_META (=32) bios with the value 0::
+
+  corrupt_bio_byte 224 w 0 32
diff --git a/Documentation/admin-guide/device-mapper/dm-init.rst b/Documentation/admin-guide/device-mapper/dm-init.rst
new file mode 100644
index 000000000000..e5242ff17e9b
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-init.rst
@@ -0,0 +1,125 @@
+================================
+Early creation of mapped devices
+================================
+
+It is possible to configure a device-mapper device to act as the root device for
+your system in two ways.
+
+The first is to build an initial ramdisk which boots to a minimal userspace
+which configures the device, then pivot_root(8) in to it.
+
+The second is to create one or more device-mappers using the module parameter
+"dm-mod.create=" through the kernel boot command line argument.
+
+The format is specified as a string of data separated by commas and optionally
+semi-colons, where:
+
+ - a comma is used to separate fields like name, uuid, flags and table
+   (specifies one device)
+ - a semi-colon is used to separate devices.
+
+So the format will look like this::
+
+ dm-mod.create=<name>,<uuid>,<minor>,<flags>,<table>[,<table>+][;<name>,<uuid>,<minor>,<flags>,<table>[,<table>+]+]
+
+Where::
+
+	<name>		::= The device name.
+	<uuid>		::= xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx | ""
+	<minor>		::= The device minor number | ""
+	<flags>		::= "ro" | "rw"
+	<table>		::= <start_sector> <num_sectors> <target_type> <target_args>
+	<target_type>	::= "verity" | "linear" | ... (see list below)
+
+The dm line should be equivalent to the one used by the dmsetup tool with the
+`--concise` argument.
+
+Target types
+============
+
+Not all target types are available as there are serious risks in allowing
+activation of certain DM targets without first using userspace tools to check
+the validity of associated metadata.
+
+======================= =======================================================
+`cache`			constrained, userspace should verify cache device
+`crypt`			allowed
+`delay`			allowed
+`era`			constrained, userspace should verify metadata device
+`flakey`		constrained, meant for test
+`linear`		allowed
+`log-writes`		constrained, userspace should verify metadata device
+`mirror`		constrained, userspace should verify main/mirror device
+`raid`			constrained, userspace should verify metadata device
+`snapshot`		constrained, userspace should verify src/dst device
+`snapshot-origin`	allowed
+`snapshot-merge`	constrained, userspace should verify src/dst device
+`striped`		allowed
+`switch`		constrained, userspace should verify dev path
+`thin`			constrained, requires dm target message from userspace
+`thin-pool`		constrained, requires dm target message from userspace
+`verity`		allowed
+`writecache`		constrained, userspace should verify cache device
+`zero`			constrained, not meant for rootfs
+======================= =======================================================
+
+If the target is not listed above, it is constrained by default (not tested).
+
+Examples
+========
+An example of booting to a linear array made up of user-mode linux block
+devices::
+
+  dm-mod.create="lroot,,,rw, 0 4096 linear 98:16 0, 4096 4096 linear 98:32 0" root=/dev/dm-0
+
+This will boot to a rw dm-linear target of 8192 sectors split across two block
+devices identified by their major:minor numbers.  After boot, udev will rename
+this target to /dev/mapper/lroot (depending on the rules). No uuid was assigned.
+
+An example of multiple device-mappers, with the dm-mod.create="..." contents
+is shown here split on multiple lines for readability::
+
+  dm-linear,,1,rw,
+    0 32768 linear 8:1 0,
+    32768 1024000 linear 8:2 0;
+  dm-verity,,3,ro,
+    0 1638400 verity 1 /dev/sdc1 /dev/sdc2 4096 4096 204800 1 sha256
+    ac87db56303c9c1da433d7209b5a6ef3e4779df141200cbd7c157dcb8dd89c42
+    5ebfe87f7df3235b80a117ebc4078e44f55045487ad4a96581d1adb564615b51
+
+Other examples (per target):
+
+"crypt"::
+
+  dm-crypt,,8,ro,
+    0 1048576 crypt aes-xts-plain64
+    babebabebabebabebabebabebabebabebabebabebabebabebabebabebabebabe 0
+    /dev/sda 0 1 allow_discards
+
+"delay"::
+
+  dm-delay,,4,ro,0 409600 delay /dev/sda1 0 500
+
+"linear"::
+
+  dm-linear,,,rw,
+    0 32768 linear /dev/sda1 0,
+    32768 1024000 linear /dev/sda2 0,
+    1056768 204800 linear /dev/sda3 0,
+    1261568 512000 linear /dev/sda4 0
+
+"snapshot-origin"::
+
+  dm-snap-orig,,4,ro,0 409600 snapshot-origin 8:2
+
+"striped"::
+
+  dm-striped,,4,ro,0 1638400 striped 4 4096
+  /dev/sda1 0 /dev/sda2 0 /dev/sda3 0 /dev/sda4 0
+
+"verity"::
+
+  dm-verity,,4,ro,
+    0 1638400 verity 1 8:1 8:2 4096 4096 204800 1 sha256
+    fb1a5a0f00deb908d8b53cb270858975e76cf64105d412ce764225d53b8f3cfd
+    51934789604d1b92399c52e7cb149d1b3a1b74bbbcb103b2a0aaacbed5c08584
diff --git a/Documentation/admin-guide/device-mapper/dm-integrity.rst b/Documentation/admin-guide/device-mapper/dm-integrity.rst
new file mode 100644
index 000000000000..a30aa91b5fbe
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-integrity.rst
@@ -0,0 +1,259 @@
+============
+dm-integrity
+============
+
+The dm-integrity target emulates a block device that has additional
+per-sector tags that can be used for storing integrity information.
+
+A general problem with storing integrity tags with every sector is that
+writing the sector and the integrity tag must be atomic - i.e. in case of
+crash, either both sector and integrity tag or none of them is written.
+
+To guarantee write atomicity, the dm-integrity target uses journal, it
+writes sector data and integrity tags into a journal, commits the journal
+and then copies the data and integrity tags to their respective location.
+
+The dm-integrity target can be used with the dm-crypt target - in this
+situation the dm-crypt target creates the integrity data and passes them
+to the dm-integrity target via bio_integrity_payload attached to the bio.
+In this mode, the dm-crypt and dm-integrity targets provide authenticated
+disk encryption - if the attacker modifies the encrypted device, an I/O
+error is returned instead of random data.
+
+The dm-integrity target can also be used as a standalone target, in this
+mode it calculates and verifies the integrity tag internally. In this
+mode, the dm-integrity target can be used to detect silent data
+corruption on the disk or in the I/O path.
+
+There's an alternate mode of operation where dm-integrity uses bitmap
+instead of a journal. If a bit in the bitmap is 1, the corresponding
+region's data and integrity tags are not synchronized - if the machine
+crashes, the unsynchronized regions will be recalculated. The bitmap mode
+is faster than the journal mode, because we don't have to write the data
+twice, but it is also less reliable, because if data corruption happens
+when the machine crashes, it may not be detected.
+
+When loading the target for the first time, the kernel driver will format
+the device. But it will only format the device if the superblock contains
+zeroes. If the superblock is neither valid nor zeroed, the dm-integrity
+target can't be loaded.
+
+To use the target for the first time:
+
+1. overwrite the superblock with zeroes
+2. load the dm-integrity target with one-sector size, the kernel driver
+   will format the device
+3. unload the dm-integrity target
+4. read the "provided_data_sectors" value from the superblock
+5. load the dm-integrity target with the the target size
+   "provided_data_sectors"
+6. if you want to use dm-integrity with dm-crypt, load the dm-crypt target
+   with the size "provided_data_sectors"
+
+
+Target arguments:
+
+1. the underlying block device
+
+2. the number of reserved sector at the beginning of the device - the
+   dm-integrity won't read of write these sectors
+
+3. the size of the integrity tag (if "-" is used, the size is taken from
+   the internal-hash algorithm)
+
+4. mode:
+
+	D - direct writes (without journal)
+		in this mode, journaling is
+		not used and data sectors and integrity tags are written
+		separately. In case of crash, it is possible that the data
+		and integrity tag doesn't match.
+	J - journaled writes
+		data and integrity tags are written to the
+		journal and atomicity is guaranteed. In case of crash,
+		either both data and tag or none of them are written. The
+		journaled mode degrades write throughput twice because the
+		data have to be written twice.
+	B - bitmap mode - data and metadata are written without any
+		synchronization, the driver maintains a bitmap of dirty
+		regions where data and metadata don't match. This mode can
+		only be used with internal hash.
+	R - recovery mode - in this mode, journal is not replayed,
+		checksums are not checked and writes to the device are not
+		allowed. This mode is useful for data recovery if the
+		device cannot be activated in any of the other standard
+		modes.
+
+5. the number of additional arguments
+
+Additional arguments:
+
+journal_sectors:number
+	The size of journal, this argument is used only if formatting the
+	device. If the device is already formatted, the value from the
+	superblock is used.
+
+interleave_sectors:number
+	The number of interleaved sectors. This values is rounded down to
+	a power of two. If the device is already formatted, the value from
+	the superblock is used.
+
+meta_device:device
+	Don't interleave the data and metadata on on device. Use a
+	separate device for metadata.
+
+buffer_sectors:number
+	The number of sectors in one buffer. The value is rounded down to
+	a power of two.
+
+	The tag area is accessed using buffers, the buffer size is
+	configurable. The large buffer size means that the I/O size will
+	be larger, but there could be less I/Os issued.
+
+journal_watermark:number
+	The journal watermark in percents. When the size of the journal
+	exceeds this watermark, the thread that flushes the journal will
+	be started.
+
+commit_time:number
+	Commit time in milliseconds. When this time passes, the journal is
+	written. The journal is also written immediatelly if the FLUSH
+	request is received.
+
+internal_hash:algorithm(:key)	(the key is optional)
+	Use internal hash or crc.
+	When this argument is used, the dm-integrity target won't accept
+	integrity tags from the upper target, but it will automatically
+	generate and verify the integrity tags.
+
+	You can use a crc algorithm (such as crc32), then integrity target
+	will protect the data against accidental corruption.
+	You can also use a hmac algorithm (for example
+	"hmac(sha256):0123456789abcdef"), in this mode it will provide
+	cryptographic authentication of the data without encryption.
+
+	When this argument is not used, the integrity tags are accepted
+	from an upper layer target, such as dm-crypt. The upper layer
+	target should check the validity of the integrity tags.
+
+recalculate
+	Recalculate the integrity tags automatically. It is only valid
+	when using internal hash.
+
+journal_crypt:algorithm(:key)	(the key is optional)
+	Encrypt the journal using given algorithm to make sure that the
+	attacker can't read the journal. You can use a block cipher here
+	(such as "cbc(aes)") or a stream cipher (for example "chacha20",
+	"salsa20", "ctr(aes)" or "ecb(arc4)").
+
+	The journal contains history of last writes to the block device,
+	an attacker reading the journal could see the last sector nubmers
+	that were written. From the sector numbers, the attacker can infer
+	the size of files that were written. To protect against this
+	situation, you can encrypt the journal.
+
+journal_mac:algorithm(:key)	(the key is optional)
+	Protect sector numbers in the journal from accidental or malicious
+	modification. To protect against accidental modification, use a
+	crc algorithm, to protect against malicious modification, use a
+	hmac algorithm with a key.
+
+	This option is not needed when using internal-hash because in this
+	mode, the integrity of journal entries is checked when replaying
+	the journal. Thus, modified sector number would be detected at
+	this stage.
+
+block_size:number
+	The size of a data block in bytes.  The larger the block size the
+	less overhead there is for per-block integrity metadata.
+	Supported values are 512, 1024, 2048 and 4096 bytes.  If not
+	specified the default block size is 512 bytes.
+
+sectors_per_bit:number
+	In the bitmap mode, this parameter specifies the number of
+	512-byte sectors that corresponds to one bitmap bit.
+
+bitmap_flush_interval:number
+	The bitmap flush interval in milliseconds. The metadata buffers
+	are synchronized when this interval expires.
+
+
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
+be changed when reloading the target (load an inactive table and swap the
+tables with suspend and resume). The other arguments should not be changed
+when reloading the target because the layout of disk data depend on them
+and the reloaded target would be non-functional.
+
+
+The layout of the formatted block device:
+
+* reserved sectors
+    (they are not used by this target, they can be used for
+    storing LUKS metadata or for other purpose), the size of the reserved
+    area is specified in the target arguments
+
+* superblock (4kiB)
+	* magic string - identifies that the device was formatted
+	* version
+	* log2(interleave sectors)
+	* integrity tag size
+	* the number of journal sections
+	* provided data sectors - the number of sectors that this target
+	  provides (i.e. the size of the device minus the size of all
+	  metadata and padding). The user of this target should not send
+	  bios that access data beyond the "provided data sectors" limit.
+	* flags
+	    SB_FLAG_HAVE_JOURNAL_MAC
+		- a flag is set if journal_mac is used
+	    SB_FLAG_RECALCULATING
+		- recalculating is in progress
+	    SB_FLAG_DIRTY_BITMAP
+		- journal area contains the bitmap of dirty
+		  blocks
+	* log2(sectors per block)
+	* a position where recalculating finished
+* journal
+	The journal is divided into sections, each section contains:
+
+	* metadata area (4kiB), it contains journal entries
+
+	  - every journal entry contains:
+
+		* logical sector (specifies where the data and tag should
+		  be written)
+		* last 8 bytes of data
+		* integrity tag (the size is specified in the superblock)
+
+	  - every metadata sector ends with
+
+		* mac (8-bytes), all the macs in 8 metadata sectors form a
+		  64-byte value. It is used to store hmac of sector
+		  numbers in the journal section, to protect against a
+		  possibility that the attacker tampers with sector
+		  numbers in the journal.
+		* commit id
+
+	* data area (the size is variable; it depends on how many journal
+	  entries fit into the metadata area)
+
+	    - every sector in the data area contains:
+
+		* data (504 bytes of data, the last 8 bytes are stored in
+		  the journal entry)
+		* commit id
+
+	To test if the whole journal section was written correctly, every
+	512-byte sector of the journal ends with 8-byte commit id. If the
+	commit id matches on all sectors in a journal section, then it is
+	assumed that the section was written correctly. If the commit id
+	doesn't match, the section was written partially and it should not
+	be replayed.
+
+* one or more runs of interleaved tags and data.
+    Each run contains:
+
+	* tag area - it contains integrity tags. There is one tag for each
+	  sector in the data area
+	* data area - it contains data sectors. The number of data sectors
+	  in one run must be a power of two. log2 of this value is stored
+	  in the superblock.
diff --git a/Documentation/admin-guide/device-mapper/dm-io.rst b/Documentation/admin-guide/device-mapper/dm-io.rst
new file mode 100644
index 000000000000..d2492917a1f5
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-io.rst
@@ -0,0 +1,75 @@
+=====
+dm-io
+=====
+
+Dm-io provides synchronous and asynchronous I/O services. There are three
+types of I/O services available, and each type has a sync and an async
+version.
+
+The user must set up an io_region structure to describe the desired location
+of the I/O. Each io_region indicates a block-device along with the starting
+sector and size of the region::
+
+   struct io_region {
+      struct block_device *bdev;
+      sector_t sector;
+      sector_t count;
+   };
+
+Dm-io can read from one io_region or write to one or more io_regions. Writes
+to multiple regions are specified by an array of io_region structures.
+
+The first I/O service type takes a list of memory pages as the data buffer for
+the I/O, along with an offset into the first page::
+
+   struct page_list {
+      struct page_list *next;
+      struct page *page;
+   };
+
+   int dm_io_sync(unsigned int num_regions, struct io_region *where, int rw,
+                  struct page_list *pl, unsigned int offset,
+                  unsigned long *error_bits);
+   int dm_io_async(unsigned int num_regions, struct io_region *where, int rw,
+                   struct page_list *pl, unsigned int offset,
+                   io_notify_fn fn, void *context);
+
+The second I/O service type takes an array of bio vectors as the data buffer
+for the I/O. This service can be handy if the caller has a pre-assembled bio,
+but wants to direct different portions of the bio to different devices::
+
+   int dm_io_sync_bvec(unsigned int num_regions, struct io_region *where,
+                       int rw, struct bio_vec *bvec,
+                       unsigned long *error_bits);
+   int dm_io_async_bvec(unsigned int num_regions, struct io_region *where,
+                        int rw, struct bio_vec *bvec,
+                        io_notify_fn fn, void *context);
+
+The third I/O service type takes a pointer to a vmalloc'd memory buffer as the
+data buffer for the I/O. This service can be handy if the caller needs to do
+I/O to a large region but doesn't want to allocate a large number of individual
+memory pages::
+
+   int dm_io_sync_vm(unsigned int num_regions, struct io_region *where, int rw,
+                     void *data, unsigned long *error_bits);
+   int dm_io_async_vm(unsigned int num_regions, struct io_region *where, int rw,
+                      void *data, io_notify_fn fn, void *context);
+
+Callers of the asynchronous I/O services must include the name of a completion
+callback routine and a pointer to some context data for the I/O::
+
+   typedef void (*io_notify_fn)(unsigned long error, void *context);
+
+The "error" parameter in this callback, as well as the `*error` parameter in
+all of the synchronous versions, is a bitset (instead of a simple error value).
+In the case of an write-I/O to multiple regions, this bitset allows dm-io to
+indicate success or failure on each individual region.
+
+Before using any of the dm-io services, the user should call dm_io_get()
+and specify the number of pages they expect to perform I/O on concurrently.
+Dm-io will attempt to resize its mempool to make sure enough pages are
+always available in order to avoid unnecessary waiting while performing I/O.
+
+When the user is finished using the dm-io services, they should call
+dm_io_put() and specify the same number of pages that were given on the
+dm_io_get() call.
diff --git a/Documentation/admin-guide/device-mapper/dm-log.rst b/Documentation/admin-guide/device-mapper/dm-log.rst
new file mode 100644
index 000000000000..ba4fce39bc27
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-log.rst
@@ -0,0 +1,57 @@
+=====================
+Device-Mapper Logging
+=====================
+The device-mapper logging code is used by some of the device-mapper
+RAID targets to track regions of the disk that are not consistent.
+A region (or portion of the address space) of the disk may be
+inconsistent because a RAID stripe is currently being operated on or
+a machine died while the region was being altered.  In the case of
+mirrors, a region would be considered dirty/inconsistent while you
+are writing to it because the writes need to be replicated for all
+the legs of the mirror and may not reach the legs at the same time.
+Once all writes are complete, the region is considered clean again.
+
+There is a generic logging interface that the device-mapper RAID
+implementations use to perform logging operations (see
+dm_dirty_log_type in include/linux/dm-dirty-log.h).  Various different
+logging implementations are available and provide different
+capabilities.  The list includes:
+
+==============	==============================================================
+Type		Files
+==============	==============================================================
+disk		drivers/md/dm-log.c
+core		drivers/md/dm-log.c
+userspace	drivers/md/dm-log-userspace* include/linux/dm-log-userspace.h
+==============	==============================================================
+
+The "disk" log type
+-------------------
+This log implementation commits the log state to disk.  This way, the
+logging state survives reboots/crashes.
+
+The "core" log type
+-------------------
+This log implementation keeps the log state in memory.  The log state
+will not survive a reboot or crash, but there may be a small boost in
+performance.  This method can also be used if no storage device is
+available for storing log state.
+
+The "userspace" log type
+------------------------
+This log type simply provides a way to export the log API to userspace,
+so log implementations can be done there.  This is done by forwarding most
+logging requests to userspace, where a daemon receives and processes the
+request.
+
+The structure used for communication between kernel and userspace are
+located in include/linux/dm-log-userspace.h.  Due to the frequency,
+diversity, and 2-way communication nature of the exchanges between
+kernel and userspace, 'connector' is used as the interface for
+communication.
+
+There are currently two userspace log implementations that leverage this
+framework - "clustered-disk" and "clustered-core".  These implementations
+provide a cluster-coherent log for shared-storage.  Device-mapper mirroring
+can be used in a shared-storage environment when the cluster log implementations
+are employed.
diff --git a/Documentation/admin-guide/device-mapper/dm-queue-length.rst b/Documentation/admin-guide/device-mapper/dm-queue-length.rst
new file mode 100644
index 000000000000..d8e381c1cb02
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-queue-length.rst
@@ -0,0 +1,48 @@
+===============
+dm-queue-length
+===============
+
+dm-queue-length is a path selector module for device-mapper targets,
+which selects a path with the least number of in-flight I/Os.
+The path selector name is 'queue-length'.
+
+Table parameters for each path: [<repeat_count>]
+
+::
+
+	<repeat_count>: The number of I/Os to dispatch using the selected
+			path before switching to the next path.
+			If not given, internal default is used. To check
+			the default value, see the activated table.
+
+Status for each path: <status> <fail-count> <in-flight>
+
+::
+
+	<status>: 'A' if the path is active, 'F' if the path is failed.
+	<fail-count>: The number of path failures.
+	<in-flight>: The number of in-flight I/Os on the path.
+
+
+Algorithm
+=========
+
+dm-queue-length increments/decrements 'in-flight' when an I/O is
+dispatched/completed respectively.
+dm-queue-length selects a path with the minimum 'in-flight'.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128.
+
+::
+
+  # echo "0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 queue-length 0 2 1 8:0 128 8:16 128
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 1 8:0 A 0 0 8:16 A 0 0
diff --git a/Documentation/admin-guide/device-mapper/dm-raid.rst b/Documentation/admin-guide/device-mapper/dm-raid.rst
new file mode 100644
index 000000000000..2fe255b130fb
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-raid.rst
@@ -0,0 +1,419 @@
+=======
+dm-raid
+=======
+
+The device-mapper RAID (dm-raid) target provides a bridge from DM to MD.
+It allows the MD RAID drivers to be accessed using a device-mapper
+interface.
+
+
+Mapping Table Interface
+-----------------------
+The target is named "raid" and it accepts the following parameters::
+
+  <raid_type> <#raid_params> <raid_params> \
+    <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>]
+
+<raid_type>:
+
+  ============= ===============================================================
+  raid0		RAID0 striping (no resilience)
+  raid1		RAID1 mirroring
+  raid4		RAID4 with dedicated last parity disk
+  raid5_n 	RAID5 with dedicated last parity disk supporting takeover
+		Same as raid4
+
+		- Transitory layout
+  raid5_la	RAID5 left asymmetric
+
+		- rotating parity 0 with data continuation
+  raid5_ra	RAID5 right asymmetric
+
+		- rotating parity N with data continuation
+  raid5_ls	RAID5 left symmetric
+
+		- rotating parity 0 with data restart
+  raid5_rs 	RAID5 right symmetric
+
+		- rotating parity N with data restart
+  raid6_zr	RAID6 zero restart
+
+		- rotating parity zero (left-to-right) with data restart
+  raid6_nr	RAID6 N restart
+
+		- rotating parity N (right-to-left) with data restart
+  raid6_nc	RAID6 N continue
+
+		- rotating parity N (right-to-left) with data continuation
+  raid6_n_6	RAID6 with dedicate parity disks
+
+		- parity and Q-syndrome on the last 2 disks;
+		  layout for takeover from/to raid4/raid5_n
+  raid6_la_6	Same as "raid_la" plus dedicated last Q-syndrome disk
+
+		- layout for takeover from raid5_la from/to raid6
+  raid6_ra_6	Same as "raid5_ra" dedicated last Q-syndrome disk
+
+		- layout for takeover from raid5_ra from/to raid6
+  raid6_ls_6	Same as "raid5_ls" dedicated last Q-syndrome disk
+
+		- layout for takeover from raid5_ls from/to raid6
+  raid6_rs_6	Same as "raid5_rs" dedicated last Q-syndrome disk
+
+		- layout for takeover from raid5_rs from/to raid6
+  raid10        Various RAID10 inspired algorithms chosen by additional params
+		(see raid10_format and raid10_copies below)
+
+		- RAID10: Striped Mirrors (aka 'Striping on top of mirrors')
+		- RAID1E: Integrated Adjacent Stripe Mirroring
+		- RAID1E: Integrated Offset Stripe Mirroring
+		- and other similar RAID10 variants
+  ============= ===============================================================
+
+  Reference: Chapter 4 of
+  http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf
+
+<#raid_params>: The number of parameters that follow.
+
+<raid_params> consists of
+
+    Mandatory parameters:
+        <chunk_size>:
+		      Chunk size in sectors.  This parameter is often known as
+		      "stripe size".  It is the only mandatory parameter and
+		      is placed first.
+
+    followed by optional parameters (in any order):
+	[sync|nosync]
+		Force or prevent RAID initialization.
+
+	[rebuild <idx>]
+		Rebuild drive number 'idx' (first drive is 0).
+
+	[daemon_sleep <ms>]
+		Interval between runs of the bitmap daemon that
+		clear bits.  A longer interval means less bitmap I/O but
+		resyncing after a failure is likely to take longer.
+
+	[min_recovery_rate <kB/sec/disk>]
+		Throttle RAID initialization
+	[max_recovery_rate <kB/sec/disk>]
+		Throttle RAID initialization
+	[write_mostly <idx>]
+		Mark drive index 'idx' write-mostly.
+	[max_write_behind <sectors>]
+		See '--write-behind=' (man mdadm)
+	[stripe_cache <sectors>]
+		Stripe cache size (RAID 4/5/6 only)
+	[region_size <sectors>]
+		The region_size multiplied by the number of regions is the
+		logical size of the array.  The bitmap records the device
+		synchronisation state for each region.
+
+        [raid10_copies   <# copies>], [raid10_format   <near|far|offset>]
+		These two options are used to alter the default layout of
+		a RAID10 configuration.  The number of copies is can be
+		specified, but the default is 2.  There are also three
+		variations to how the copies are laid down - the default
+		is "near".  Near copies are what most people think of with
+		respect to mirroring.  If these options are left unspecified,
+		or 'raid10_copies 2' and/or 'raid10_format near' are given,
+		then the layouts for 2, 3 and 4 devices	are:
+
+		========	 ==========	   ==============
+		2 drives         3 drives          4 drives
+		========	 ==========	   ==============
+		A1  A1           A1  A1  A2        A1  A1  A2  A2
+		A2  A2           A2  A3  A3        A3  A3  A4  A4
+		A3  A3           A4  A4  A5        A5  A5  A6  A6
+		A4  A4           A5  A6  A6        A7  A7  A8  A8
+		..  ..           ..  ..  ..        ..  ..  ..  ..
+		========	 ==========	   ==============
+
+		The 2-device layout is equivalent 2-way RAID1.  The 4-device
+		layout is what a traditional RAID10 would look like.  The
+		3-device layout is what might be called a 'RAID1E - Integrated
+		Adjacent Stripe Mirroring'.
+
+		If 'raid10_copies 2' and 'raid10_format far', then the layouts
+		for 2, 3 and 4 devices are:
+
+		========	     ============	  ===================
+		2 drives             3 drives             4 drives
+		========	     ============	  ===================
+		A1  A2               A1   A2   A3         A1   A2   A3   A4
+		A3  A4               A4   A5   A6         A5   A6   A7   A8
+		A5  A6               A7   A8   A9         A9   A10  A11  A12
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+		A2  A1               A3   A1   A2         A2   A1   A4   A3
+		A4  A3               A6   A4   A5         A6   A5   A8   A7
+		A6  A5               A9   A7   A8         A10  A9   A12  A11
+		..  ..               ..   ..   ..         ..   ..   ..   ..
+		========	     ============	  ===================
+
+		If 'raid10_copies 2' and 'raid10_format offset', then the
+		layouts for 2, 3 and 4 devices are:
+
+		========       ==========         ================
+		2 drives       3 drives           4 drives
+		========       ==========         ================
+		A1  A2         A1  A2  A3         A1  A2  A3  A4
+		A2  A1         A3  A1  A2         A2  A1  A4  A3
+		A3  A4         A4  A5  A6         A5  A6  A7  A8
+		A4  A3         A6  A4  A5         A6  A5  A8  A7
+		A5  A6         A7  A8  A9         A9  A10 A11 A12
+		A6  A5         A9  A7  A8         A10 A9  A12 A11
+		..  ..         ..  ..  ..         ..  ..  ..  ..
+		========       ==========         ================
+
+		Here we see layouts closely akin to 'RAID1E - Integrated
+		Offset Stripe Mirroring'.
+
+        [delta_disks <N>]
+		The delta_disks option value (-251 < N < +251) triggers
+		device removal (negative value) or device addition (positive
+		value) to any reshape supporting raid levels 4/5/6 and 10.
+		RAID levels 4/5/6 allow for addition of devices (metadata
+		and data device tuple), raid10_near and raid10_offset only
+		allow for device addition. raid10_far does not support any
+		reshaping at all.
+		A minimum of devices have to be kept to enforce resilience,
+		which is 3 devices for raid4/5 and 4 devices for raid6.
+
+        [data_offset <sectors>]
+		This option value defines the offset into each data device
+		where the data starts. This is used to provide out-of-place
+		reshaping space to avoid writing over data while
+		changing the layout of stripes, hence an interruption/crash
+		may happen at any time without the risk of losing data.
+		E.g. when adding devices to an existing raid set during
+		forward reshaping, the out-of-place space will be allocated
+		at the beginning of each raid device. The kernel raid4/5/6/10
+		MD personalities supporting such device addition will read the data from
+		the existing first stripes (those with smaller number of stripes)
+		starting at data_offset to fill up a new stripe with the larger
+		number of stripes, calculate the redundancy blocks (CRC/Q-syndrome)
+		and write that new stripe to offset 0. Same will be applied to all
+		N-1 other new stripes. This out-of-place scheme is used to change
+		the RAID type (i.e. the allocation algorithm) as well, e.g.
+		changing from raid5_ls to raid5_n.
+
+	[journal_dev <dev>]
+		This option adds a journal device to raid4/5/6 raid sets and
+		uses it to close the 'write hole' caused by the non-atomic updates
+		to the component devices which can cause data loss during recovery.
+		The journal device is used as writethrough thus causing writes to
+		be throttled versus non-journaled raid4/5/6 sets.
+		Takeover/reshape is not possible with a raid4/5/6 journal device;
+		it has to be deconfigured before requesting these.
+
+	[journal_mode <mode>]
+		This option sets the caching mode on journaled raid4/5/6 raid sets
+		(see 'journal_dev <dev>' above) to 'writethrough' or 'writeback'.
+		If 'writeback' is selected the journal device has to be resilient
+		and must not suffer from the 'write hole' problem itself (e.g. use
+		raid1 or raid10) to avoid a single point of failure.
+
+<#raid_devs>: The number of devices composing the array.
+	Each device consists of two entries.  The first is the device
+	containing the metadata (if any); the second is the one containing the
+	data. A Maximum of 64 metadata/data device entries are supported
+	up to target version 1.8.0.
+	1.9.0 supports up to 253 which is enforced by the used MD kernel runtime.
+
+	If a drive has failed or is missing at creation time, a '-' can be
+	given for both the metadata and data drives for a given position.
+
+
+Example Tables
+--------------
+
+::
+
+  # RAID4 - 4 data drives, 1 parity (no metadata devices)
+  # No metadata devices specified to hold superblock/bitmap info
+  # Chunk size of 1MiB
+  # (Lines separated for easy reading)
+
+  0 1960893648 raid \
+          raid4 1 2048 \
+          5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81
+
+  # RAID4 - 4 data drives, 1 parity (with metadata devices)
+  # Chunk size of 1MiB, force RAID initialization,
+  #       min recovery rate at 20 kiB/sec/disk
+
+  0 1960893648 raid \
+          raid4 4 2048 sync min_recovery_rate 20 \
+          5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82
+
+
+Status Output
+-------------
+'dmsetup table' displays the table used to construct the mapping.
+The optional parameters are always printed in the order listed
+above with "sync" or "nosync" always output ahead of the other
+arguments, regardless of the order used when originally loading the table.
+Arguments that can be repeated are ordered by value.
+
+
+'dmsetup status' yields information on the state and health of the array.
+The output is as follows (normally a single line, but expanded here for
+clarity)::
+
+  1: <s> <l> raid \
+  2:      <raid_type> <#devices> <health_chars> \
+  3:      <sync_ratio> <sync_action> <mismatch_cnt>
+
+Line 1 is the standard output produced by device-mapper.
+
+Line 2 & 3 are produced by the raid target and are best explained by example::
+
+        0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0
+
+Here we can see the RAID type is raid4, there are 5 devices - all of
+which are 'A'live, and the array is 2/490221568 complete with its initial
+recovery.  Here is a fuller description of the individual fields:
+
+	=============== =========================================================
+	<raid_type>     Same as the <raid_type> used to create the array.
+	<health_chars>  One char for each device, indicating:
+
+			- 'A' = alive and in-sync
+			- 'a' = alive but not in-sync
+			- 'D' = dead/failed.
+	<sync_ratio>    The ratio indicating how much of the array has undergone
+			the process described by 'sync_action'.  If the
+			'sync_action' is "check" or "repair", then the process
+			of "resync" or "recover" can be considered complete.
+	<sync_action>   One of the following possible states:
+
+			idle
+				- No synchronization action is being performed.
+			frozen
+				- The current action has been halted.
+			resync
+				- Array is undergoing its initial synchronization
+				  or is resynchronizing after an unclean shutdown
+				  (possibly aided by a bitmap).
+			recover
+				- A device in the array is being rebuilt or
+				  replaced.
+			check
+				- A user-initiated full check of the array is
+				  being performed.  All blocks are read and
+				  checked for consistency.  The number of
+				  discrepancies found are recorded in
+				  <mismatch_cnt>.  No changes are made to the
+				  array by this action.
+			repair
+				- The same as "check", but discrepancies are
+				  corrected.
+			reshape
+				- The array is undergoing a reshape.
+	<mismatch_cnt>  The number of discrepancies found between mirror copies
+			in RAID1/10 or wrong parity values found in RAID4/5/6.
+			This value is valid only after a "check" of the array
+			is performed.  A healthy array has a 'mismatch_cnt' of 0.
+	<data_offset>   The current data offset to the start of the user data on
+			each component device of a raid set (see the respective
+			raid parameter to support out-of-place reshaping).
+	<journal_char>	- 'A' - active write-through journal device.
+			- 'a' - active write-back journal device.
+			- 'D' - dead journal device.
+			- '-' - no journal device.
+	=============== =========================================================
+
+
+Message Interface
+-----------------
+The dm-raid target will accept certain actions through the 'message' interface.
+('man dmsetup' for more information on the message interface.)  These actions
+include:
+
+	========= ================================================
+	"idle"    Halt the current sync action.
+	"frozen"  Freeze the current sync action.
+	"resync"  Initiate/continue a resync.
+	"recover" Initiate/continue a recover process.
+	"check"   Initiate a check (i.e. a "scrub") of the array.
+	"repair"  Initiate a repair of the array.
+	========= ================================================
+
+
+Discard Support
+---------------
+The implementation of discard support among hardware vendors varies.
+When a block is discarded, some storage devices will return zeroes when
+the block is read.  These devices set the 'discard_zeroes_data'
+attribute.  Other devices will return random data.  Confusingly, some
+devices that advertise 'discard_zeroes_data' will not reliably return
+zeroes when discarded blocks are read!  Since RAID 4/5/6 uses blocks
+from a number of devices to calculate parity blocks and (for performance
+reasons) relies on 'discard_zeroes_data' being reliable, it is important
+that the devices be consistent.  Blocks may be discarded in the middle
+of a RAID 4/5/6 stripe and if subsequent read results are not
+consistent, the parity blocks may be calculated differently at any time;
+making the parity blocks useless for redundancy.  It is important to
+understand how your hardware behaves with discards if you are going to
+enable discards with RAID 4/5/6.
+
+Since the behavior of storage devices is unreliable in this respect,
+even when reporting 'discard_zeroes_data', by default RAID 4/5/6
+discard support is disabled -- this ensures data integrity at the
+expense of losing some performance.
+
+Storage devices that properly support 'discard_zeroes_data' are
+increasingly whitelisted in the kernel and can thus be trusted.
+
+For trusted devices, the following dm-raid module parameter can be set
+to safely enable discard support for RAID 4/5/6:
+
+    'devices_handle_discards_safely'
+
+
+Version History
+---------------
+
+::
+
+ 1.0.0	Initial version.  Support for RAID 4/5/6
+ 1.1.0	Added support for RAID 1
+ 1.2.0	Handle creation of arrays that contain failed devices.
+ 1.3.0	Added support for RAID 10
+ 1.3.1	Allow device replacement/rebuild for RAID 10
+ 1.3.2	Fix/improve redundancy checking for RAID10
+ 1.4.0	Non-functional change.  Removes arg from mapping function.
+ 1.4.1	RAID10 fix redundancy validation checks (commit 55ebbb5).
+ 1.4.2	Add RAID10 "far" and "offset" algorithm support.
+ 1.5.0	Add message interface to allow manipulation of the sync_action.
+	New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt.
+ 1.5.1	Add ability to restore transiently failed devices on resume.
+ 1.5.2	'mismatch_cnt' is zero unless [last_]sync_action is "check".
+ 1.6.0	Add discard support (and devices_handle_discard_safely module param).
+ 1.7.0	Add support for MD RAID0 mappings.
+ 1.8.0	Explicitly check for compatible flags in the superblock metadata
+	and reject to start the raid set if any are set by a newer
+	target version, thus avoiding data corruption on a raid set
+	with a reshape in progress.
+ 1.9.0	Add support for RAID level takeover/reshape/region size
+	and set size reduction.
+ 1.9.1	Fix activation of existing RAID 4/10 mapped devices
+ 1.9.2	Don't emit '- -' on the status table line in case the constructor
+	fails reading a superblock. Correctly emit 'maj:min1 maj:min2' and
+	'D' on the status line.  If '- -' is passed into the constructor, emit
+	'- -' on the table line and '-' as the status line health character.
+ 1.10.0	Add support for raid4/5/6 journal device
+ 1.10.1	Fix data corruption on reshape request
+ 1.11.0	Fix table line argument order
+	(wrong raid10_copies/raid10_format sequence)
+ 1.11.1	Add raid4/5/6 journal write-back support via journal_mode option
+ 1.12.1	Fix for MD deadlock between mddev_suspend() and md_write_start() available
+ 1.13.0	Fix dev_health status at end of "recover" (was 'a', now 'A')
+ 1.13.1	Fix deadlock caused by early md_stop_writes().  Also fix size an
+	state races.
+ 1.13.2	Fix raid redundancy validation and avoid keeping raid set frozen
+ 1.14.0	Fix reshape race on small devices.  Fix stripe adding reshape
+	deadlock/potential data corruption.  Update superblock when
+	specific devices are requested via rebuild.  Fix RAID leg
+	rebuild errors.
diff --git a/Documentation/admin-guide/device-mapper/dm-service-time.rst b/Documentation/admin-guide/device-mapper/dm-service-time.rst
new file mode 100644
index 000000000000..facf277fc13c
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-service-time.rst
@@ -0,0 +1,101 @@
+===============
+dm-service-time
+===============
+
+dm-service-time is a path selector module for device-mapper targets,
+which selects a path with the shortest estimated service time for
+the incoming I/O.
+
+The service time for each path is estimated by dividing the total size
+of in-flight I/Os on a path with the performance value of the path.
+The performance value is a relative throughput value among all paths
+in a path-group, and it can be specified as a table argument.
+
+The path selector name is 'service-time'.
+
+Table parameters for each path:
+
+    [<repeat_count> [<relative_throughput>]]
+	<repeat_count>:
+			The number of I/Os to dispatch using the selected
+			path before switching to the next path.
+			If not given, internal default is used.  To check
+			the default value, see the activated table.
+	<relative_throughput>:
+			The relative throughput value of the path
+			among all paths in the path-group.
+			The valid range is 0-100.
+			If not given, minimum value '1' is used.
+			If '0' is given, the path isn't selected while
+			other paths having a positive value are available.
+
+Status for each path:
+
+    <status> <fail-count> <in-flight-size> <relative_throughput>
+	<status>:
+		'A' if the path is active, 'F' if the path is failed.
+	<fail-count>:
+		The number of path failures.
+	<in-flight-size>:
+		The size of in-flight I/Os on the path.
+	<relative_throughput>:
+		The relative throughput value of the path
+		among all paths in the path-group.
+
+
+Algorithm
+=========
+
+dm-service-time adds the I/O size to 'in-flight-size' when the I/O is
+dispatched and subtracts when completed.
+Basically, dm-service-time selects a path having minimum service time
+which is calculated by::
+
+	('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput'
+
+However, some optimizations below are used to reduce the calculation
+as much as possible.
+
+	1. If the paths have the same 'relative_throughput', skip
+	   the division and just compare the 'in-flight-size'.
+
+	2. If the paths have the same 'in-flight-size', skip the division
+	   and just compare the 'relative_throughput'.
+
+	3. If some paths have non-zero 'relative_throughput' and others
+	   have zero 'relative_throughput', ignore those paths with zero
+	   'relative_throughput'.
+
+If such optimizations can't be applied, calculate service time, and
+compare service time.
+If calculated service time is equal, the path having maximum
+'relative_throughput' may be better.  So compare 'relative_throughput'
+then.
+
+
+Examples
+========
+In case that 2 paths (sda and sdb) are used with repeat_count == 128
+and sda has an average throughput 1GB/s and sdb has 4GB/s,
+'relative_throughput' value may be '1' for sda and '4' for sdb::
+
+  # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4
+
+
+Or '2' for sda and '8' for sdb would be also true::
+
+  # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \
+    dmsetup create test
+  #
+  # dmsetup table
+  test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8
+  #
+  # dmsetup status
+  test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8
diff --git a/Documentation/admin-guide/device-mapper/dm-uevent.rst b/Documentation/admin-guide/device-mapper/dm-uevent.rst
new file mode 100644
index 000000000000..4a8ee8d069c9
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-uevent.rst
@@ -0,0 +1,110 @@
+====================
+device-mapper uevent
+====================
+
+The device-mapper uevent code adds the capability to device-mapper to create
+and send kobject uevents (uevents).  Previously device-mapper events were only
+available through the ioctl interface.  The advantage of the uevents interface
+is the event contains environment attributes providing increased context for
+the event avoiding the need to query the state of the device-mapper device after
+the event is received.
+
+There are two functions currently for device-mapper events.  The first function
+listed creates the event and the second function sends the event(s)::
+
+  void dm_path_uevent(enum dm_uevent_type event_type, struct dm_target *ti,
+                      const char *path, unsigned nr_valid_paths)
+
+  void dm_send_uevents(struct list_head *events, struct kobject *kobj)
+
+
+The variables added to the uevent environment are:
+
+Variable Name: DM_TARGET
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description:
+:Value: Name of device-mapper target that generated the event.
+
+Variable Name: DM_ACTION
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description:
+:Value: Device-mapper specific action that caused the uevent action.
+	PATH_FAILED - A path has failed;
+	PATH_REINSTATED - A path has been reinstated.
+
+Variable Name: DM_SEQNUM
+------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: unsigned integer
+:Description: A sequence number for this specific device-mapper device.
+:Value: Valid unsigned integer range.
+
+Variable Name: DM_PATH
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: Major and minor number of the path device pertaining to this
+	      event.
+:Value: Path name in the form of "Major:Minor"
+
+Variable Name: DM_NR_VALID_PATHS
+--------------------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: unsigned integer
+:Description:
+:Value: Valid unsigned integer range.
+
+Variable Name: DM_NAME
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: Name of the device-mapper device.
+:Value: Name
+
+Variable Name: DM_UUID
+----------------------
+:Uevent Action(s): KOBJ_CHANGE
+:Type: string
+:Description: UUID of the device-mapper device.
+:Value: UUID. (Empty string if there isn't one.)
+
+An example of the uevents generated as captured by udevmonitor is shown
+below
+
+1.) Path failure::
+
+	UEVENT[1192521009.711215] change@/block/dm-3
+	ACTION=change
+	DEVPATH=/block/dm-3
+	SUBSYSTEM=block
+	DM_TARGET=multipath
+	DM_ACTION=PATH_FAILED
+	DM_SEQNUM=1
+	DM_PATH=8:32
+	DM_NR_VALID_PATHS=0
+	DM_NAME=mpath2
+	DM_UUID=mpath-35333333000002328
+	MINOR=3
+	MAJOR=253
+	SEQNUM=1130
+
+2.) Path reinstate::
+
+	UEVENT[1192521132.989927] change@/block/dm-3
+	ACTION=change
+	DEVPATH=/block/dm-3
+	SUBSYSTEM=block
+	DM_TARGET=multipath
+	DM_ACTION=PATH_REINSTATED
+	DM_SEQNUM=2
+	DM_PATH=8:32
+	DM_NR_VALID_PATHS=1
+	DM_NAME=mpath2
+	DM_UUID=mpath-35333333000002328
+	MINOR=3
+	MAJOR=253
+	SEQNUM=1131
diff --git a/Documentation/admin-guide/device-mapper/dm-zoned.rst b/Documentation/admin-guide/device-mapper/dm-zoned.rst
new file mode 100644
index 000000000000..07f56ebc1730
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/dm-zoned.rst
@@ -0,0 +1,146 @@
+========
+dm-zoned
+========
+
+The dm-zoned device mapper target exposes a zoned block device (ZBC and
+ZAC compliant devices) as a regular block device without any write
+pattern constraints. In effect, it implements a drive-managed zoned
+block device which hides from the user (a file system or an application
+doing raw block device accesses) the sequential write constraints of
+host-managed zoned block devices and can mitigate the potential
+device-side performance degradation due to excessive random writes on
+host-aware zoned block devices.
+
+For a more detailed description of the zoned block device models and
+their constraints see (for SCSI devices):
+
+http://www.t10.org/drafts.htm#ZBC_Family
+
+and (for ATA devices):
+
+http://www.t13.org/Documents/UploadedDocuments/docs2015/di537r05-Zoned_Device_ATA_Command_Set_ZAC.pdf
+
+The dm-zoned implementation is simple and minimizes system overhead (CPU
+and memory usage as well as storage capacity loss). For a 10TB
+host-managed disk with 256 MB zones, dm-zoned memory usage per disk
+instance is at most 4.5 MB and as little as 5 zones will be used
+internally for storing metadata and performaing reclaim operations.
+
+dm-zoned target devices are formatted and checked using the dmzadm
+utility available at:
+
+https://github.com/hgst/dm-zoned-tools
+
+Algorithm
+=========
+
+dm-zoned implements an on-disk buffering scheme to handle non-sequential
+write accesses to the sequential zones of a zoned block device.
+Conventional zones are used for caching as well as for storing internal
+metadata.
+
+The zones of the device are separated into 2 types:
+
+1) Metadata zones: these are conventional zones used to store metadata.
+Metadata zones are not reported as useable capacity to the user.
+
+2) Data zones: all remaining zones, the vast majority of which will be
+sequential zones used exclusively to store user data. The conventional
+zones of the device may be used also for buffering user random writes.
+Data in these zones may be directly mapped to the conventional zone, but
+later moved to a sequential zone so that the conventional zone can be
+reused for buffering incoming random writes.
+
+dm-zoned exposes a logical device with a sector size of 4096 bytes,
+irrespective of the physical sector size of the backend zoned block
+device being used. This allows reducing the amount of metadata needed to
+manage valid blocks (blocks written).
+
+The on-disk metadata format is as follows:
+
+1) The first block of the first conventional zone found contains the
+super block which describes the on disk amount and position of metadata
+blocks.
+
+2) Following the super block, a set of blocks is used to describe the
+mapping of the logical device blocks. The mapping is done per chunk of
+blocks, with the chunk size equal to the zoned block device size. The
+mapping table is indexed by chunk number and each mapping entry
+indicates the zone number of the device storing the chunk of data. Each
+mapping entry may also indicate if the zone number of a conventional
+zone used to buffer random modification to the data zone.
+
+3) A set of blocks used to store bitmaps indicating the validity of
+blocks in the data zones follows the mapping table. A valid block is
+defined as a block that was written and not discarded. For a buffered
+data chunk, a block is always valid only in the data zone mapping the
+chunk or in the buffer zone of the chunk.
+
+For a logical chunk mapped to a conventional zone, all write operations
+are processed by directly writing to the zone. If the mapping zone is a
+sequential zone, the write operation is processed directly only if the
+write offset within the logical chunk is equal to the write pointer
+offset within of the sequential data zone (i.e. the write operation is
+aligned on the zone write pointer). Otherwise, write operations are
+processed indirectly using a buffer zone. In that case, an unused
+conventional zone is allocated and assigned to the chunk being
+accessed. Writing a block to the buffer zone of a chunk will
+automatically invalidate the same block in the sequential zone mapping
+the chunk. If all blocks of the sequential zone become invalid, the zone
+is freed and the chunk buffer zone becomes the primary zone mapping the
+chunk, resulting in native random write performance similar to a regular
+block device.
+
+Read operations are processed according to the block validity
+information provided by the bitmaps. Valid blocks are read either from
+the sequential zone mapping a chunk, or if the chunk is buffered, from
+the buffer zone assigned. If the accessed chunk has no mapping, or the
+accessed blocks are invalid, the read buffer is zeroed and the read
+operation terminated.
+
+After some time, the limited number of convnetional zones available may
+be exhausted (all used to map chunks or buffer sequential zones) and
+unaligned writes to unbuffered chunks become impossible. To avoid this
+situation, a reclaim process regularly scans used conventional zones and
+tries to reclaim the least recently used zones by copying the valid
+blocks of the buffer zone to a free sequential zone. Once the copy
+completes, the chunk mapping is updated to point to the sequential zone
+and the buffer zone freed for reuse.
+
+Metadata Protection
+===================
+
+To protect metadata against corruption in case of sudden power loss or
+system crash, 2 sets of metadata zones are used. One set, the primary
+set, is used as the main metadata region, while the secondary set is
+used as a staging area. Modified metadata is first written to the
+secondary set and validated by updating the super block in the secondary
+set, a generation counter is used to indicate that this set contains the
+newest metadata. Once this operation completes, in place of metadata
+block updates can be done in the primary metadata set. This ensures that
+one of the set is always consistent (all modifications committed or none
+at all). Flush operations are used as a commit point. Upon reception of
+a flush request, metadata modification activity is temporarily blocked
+(for both incoming BIO processing and reclaim process) and all dirty
+metadata blocks are staged and updated. Normal operation is then
+resumed. Flushing metadata thus only temporarily delays write and
+discard requests. Read requests can be processed concurrently while
+metadata flush is being executed.
+
+Usage
+=====
+
+A zoned block device must first be formatted using the dmzadm tool. This
+will analyze the device zone configuration, determine where to place the
+metadata sets on the device and initialize the metadata sets.
+
+Ex::
+
+	dmzadm --format /dev/sdxx
+
+For a formatted device, the target can be created normally with the
+dmsetup utility. The only parameter that dm-zoned requires is the
+underlying zoned block device name. Ex::
+
+	echo "0 `blockdev --getsize ${dev}` zoned ${dev}" | \
+	dmsetup create dmz-`basename ${dev}`
diff --git a/Documentation/admin-guide/device-mapper/era.rst b/Documentation/admin-guide/device-mapper/era.rst
new file mode 100644
index 000000000000..90dd5c670b9f
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/era.rst
@@ -0,0 +1,116 @@
+======
+dm-era
+======
+
+Introduction
+============
+
+dm-era is a target that behaves similar to the linear target.  In
+addition it keeps track of which blocks were written within a user
+defined period of time called an 'era'.  Each era target instance
+maintains the current era as a monotonically increasing 32-bit
+counter.
+
+Use cases include tracking changed blocks for backup software, and
+partially invalidating the contents of a cache to restore cache
+coherency after rolling back a vendor snapshot.
+
+Constructor
+===========
+
+era <metadata dev> <origin dev> <block size>
+
+ ================ ======================================================
+ metadata dev     fast device holding the persistent metadata
+ origin dev	  device holding data blocks that may change
+ block size       block size of origin data device, granularity that is
+		  tracked by the target
+ ================ ======================================================
+
+Messages
+========
+
+None of the dm messages take any arguments.
+
+checkpoint
+----------
+
+Possibly move to a new era.  You shouldn't assume the era has
+incremented.  After sending this message, you should check the
+current era via the status line.
+
+take_metadata_snap
+------------------
+
+Create a clone of the metadata, to allow a userland process to read it.
+
+drop_metadata_snap
+------------------
+
+Drop the metadata snapshot.
+
+Status
+======
+
+<metadata block size> <#used metadata blocks>/<#total metadata blocks>
+<current era> <held metadata root | '-'>
+
+========================= ==============================================
+metadata block size	  Fixed block size for each metadata block in
+			  sectors
+#used metadata blocks	  Number of metadata blocks used
+#total metadata blocks	  Total number of metadata blocks
+current era		  The current era
+held metadata root	  The location, in blocks, of the metadata root
+			  that has been 'held' for userspace read
+			  access. '-' indicates there is no held root
+========================= ==============================================
+
+Detailed use case
+=================
+
+The scenario of invalidating a cache when rolling back a vendor
+snapshot was the primary use case when developing this target:
+
+Taking a vendor snapshot
+------------------------
+
+- Send a checkpoint message to the era target
+- Make a note of the current era in its status line
+- Take vendor snapshot (the era and snapshot should be forever
+  associated now).
+
+Rolling back to an vendor snapshot
+----------------------------------
+
+- Cache enters passthrough mode (see: dm-cache's docs in cache.txt)
+- Rollback vendor storage
+- Take metadata snapshot
+- Ascertain which blocks have been written since the snapshot was taken
+  by checking each block's era
+- Invalidate those blocks in the caching software
+- Cache returns to writeback/writethrough mode
+
+Memory usage
+============
+
+The target uses a bitset to record writes in the current era.  It also
+has a spare bitset ready for switching over to a new era.  Other than
+that it uses a few 4k blocks for updating metadata::
+
+   (4 * nr_blocks) bytes + buffers
+
+Resilience
+==========
+
+Metadata is updated on disk before a write to a previously unwritten
+block is performed.  As such dm-era should not be effected by a hard
+crash such as power failure.
+
+Userland tools
+==============
+
+Userland tools are found in the increasingly poorly named
+thin-provisioning-tools project:
+
+    https://github.com/jthornber/thin-provisioning-tools
diff --git a/Documentation/admin-guide/device-mapper/index.rst b/Documentation/admin-guide/device-mapper/index.rst
new file mode 100644
index 000000000000..c77c58b8f67b
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/index.rst
@@ -0,0 +1,42 @@
+=============
+Device Mapper
+=============
+
+.. toctree::
+    :maxdepth: 1
+
+    cache-policies
+    cache
+    delay
+    dm-crypt
+    dm-flakey
+    dm-init
+    dm-integrity
+    dm-io
+    dm-log
+    dm-queue-length
+    dm-raid
+    dm-service-time
+    dm-uevent
+    dm-zoned
+    era
+    kcopyd
+    linear
+    log-writes
+    persistent-data
+    snapshot
+    statistics
+    striped
+    switch
+    thin-provisioning
+    unstriped
+    verity
+    writecache
+    zero
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/admin-guide/device-mapper/kcopyd.rst b/Documentation/admin-guide/device-mapper/kcopyd.rst
new file mode 100644
index 000000000000..7651d395127f
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/kcopyd.rst
@@ -0,0 +1,47 @@
+======
+kcopyd
+======
+
+Kcopyd provides the ability to copy a range of sectors from one block-device
+to one or more other block-devices, with an asynchronous completion
+notification. It is used by dm-snapshot and dm-mirror.
+
+Users of kcopyd must first create a client and indicate how many memory pages
+to set aside for their copy jobs. This is done with a call to
+kcopyd_client_create()::
+
+   int kcopyd_client_create(unsigned int num_pages,
+                            struct kcopyd_client **result);
+
+To start a copy job, the user must set up io_region structures to describe
+the source and destinations of the copy. Each io_region indicates a
+block-device along with the starting sector and size of the region. The source
+of the copy is given as one io_region structure, and the destinations of the
+copy are given as an array of io_region structures::
+
+   struct io_region {
+      struct block_device *bdev;
+      sector_t sector;
+      sector_t count;
+   };
+
+To start the copy, the user calls kcopyd_copy(), passing in the client
+pointer, pointers to the source and destination io_regions, the name of a
+completion callback routine, and a pointer to some context data for the copy::
+
+   int kcopyd_copy(struct kcopyd_client *kc, struct io_region *from,
+                   unsigned int num_dests, struct io_region *dests,
+                   unsigned int flags, kcopyd_notify_fn fn, void *context);
+
+   typedef void (*kcopyd_notify_fn)(int read_err, unsigned int write_err,
+				    void *context);
+
+When the copy completes, kcopyd will call the user's completion routine,
+passing back the user's context pointer. It will also indicate if a read or
+write error occurred during the copy.
+
+When a user is done with all their copy jobs, they should call
+kcopyd_client_destroy() to delete the kcopyd client, which will release the
+associated memory pages::
+
+   void kcopyd_client_destroy(struct kcopyd_client *kc);
diff --git a/Documentation/admin-guide/device-mapper/linear.rst b/Documentation/admin-guide/device-mapper/linear.rst
new file mode 100644
index 000000000000..9d17fc6e64a9
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/linear.rst
@@ -0,0 +1,63 @@
+=========
+dm-linear
+=========
+
+Device-Mapper's "linear" target maps a linear range of the Device-Mapper
+device onto a linear range of another device.  This is the basic building
+block of logical volume managers.
+
+Parameters: <dev path> <offset>
+    <dev path>:
+	Full pathname to the underlying block-device, or a
+        "major:minor" device-number.
+    <offset>:
+	Starting sector within the device.
+
+
+Example scripts
+===============
+
+::
+
+  #!/bin/sh
+  # Create an identity mapping for a device
+  echo "0 `blockdev --getsz $1` linear $1 0" | dmsetup create identity
+
+::
+
+  #!/bin/sh
+  # Join 2 devices together
+  size1=`blockdev --getsz $1`
+  size2=`blockdev --getsz $2`
+  echo "0 $size1 linear $1 0
+  $size1 $size2 linear $2 0" | dmsetup create joined
+
+::
+
+  #!/usr/bin/perl -w
+  # Split a device into 4M chunks and then join them together in reverse order.
+
+  my $name = "reverse";
+  my $extent_size = 4 * 1024 * 2;
+  my $dev = $ARGV[0];
+  my $table = "";
+  my $count = 0;
+
+  if (!defined($dev)) {
+          die("Please specify a device.\n");
+  }
+
+  my $dev_size = `blockdev --getsz $dev`;
+  my $extents = int($dev_size / $extent_size) -
+                (($dev_size % $extent_size) ? 1 : 0);
+
+  while ($extents > 0) {
+          my $this_start = $count * $extent_size;
+          $extents--;
+          $count++;
+          my $this_offset = $extents * $extent_size;
+
+          $table .= "$this_start $extent_size linear $dev $this_offset\n";
+  }
+
+  `echo \"$table\" | dmsetup create $name`;
diff --git a/Documentation/admin-guide/device-mapper/log-writes.rst b/Documentation/admin-guide/device-mapper/log-writes.rst
new file mode 100644
index 000000000000..23141f2ffb7c
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/log-writes.rst
@@ -0,0 +1,145 @@
+=============
+dm-log-writes
+=============
+
+This target takes 2 devices, one to pass all IO to normally, and one to log all
+of the write operations to.  This is intended for file system developers wishing
+to verify the integrity of metadata or data as the file system is written to.
+There is a log_write_entry written for every WRITE request and the target is
+able to take arbitrary data from userspace to insert into the log.  The data
+that is in the WRITE requests is copied into the log to make the replay happen
+exactly as it happened originally.
+
+Log Ordering
+============
+
+We log things in order of completion once we are sure the write is no longer in
+cache.  This means that normal WRITE requests are not actually logged until the
+next REQ_PREFLUSH request.  This is to make it easier for userspace to replay
+the log in a way that correlates to what is on disk and not what is in cache,
+to make it easier to detect improper waiting/flushing.
+
+This works by attaching all WRITE requests to a list once the write completes.
+Once we see a REQ_PREFLUSH request we splice this list onto the request and once
+the FLUSH request completes we log all of the WRITEs and then the FLUSH.  Only
+completed WRITEs, at the time the REQ_PREFLUSH is issued, are added in order to
+simulate the worst case scenario with regard to power failures.  Consider the
+following example (W means write, C means complete):
+
+	W1,W2,W3,C3,C2,Wflush,C1,Cflush
+
+The log would show the following:
+
+	W3,W2,flush,W1....
+
+Again this is to simulate what is actually on disk, this allows us to detect
+cases where a power failure at a particular point in time would create an
+inconsistent file system.
+
+Any REQ_FUA requests bypass this flushing mechanism and are logged as soon as
+they complete as those requests will obviously bypass the device cache.
+
+Any REQ_OP_DISCARD requests are treated like WRITE requests.  Otherwise we would
+have all the DISCARD requests, and then the WRITE requests and then the FLUSH
+request.  Consider the following example:
+
+	WRITE block 1, DISCARD block 1, FLUSH
+
+If we logged DISCARD when it completed, the replay would look like this:
+
+	DISCARD 1, WRITE 1, FLUSH
+
+which isn't quite what happened and wouldn't be caught during the log replay.
+
+Target interface
+================
+
+i) Constructor
+
+   log-writes <dev_path> <log_dev_path>
+
+   ============= ==============================================
+   dev_path	 Device that all of the IO will go to normally.
+   log_dev_path  Device where the log entries are written to.
+   ============= ==============================================
+
+ii) Status
+
+    <#logged entries> <highest allocated sector>
+
+    =========================== ========================
+    #logged entries	        Number of logged entries
+    highest allocated sector    Highest allocated sector
+    =========================== ========================
+
+iii) Messages
+
+    mark <description>
+
+	You can use a dmsetup message to set an arbitrary mark in a log.
+	For example say you want to fsck a file system after every
+	write, but first you need to replay up to the mkfs to make sure
+	we're fsck'ing something reasonable, you would do something like
+	this::
+
+	  mkfs.btrfs -f /dev/mapper/log
+	  dmsetup message log 0 mark mkfs
+	  <run test>
+
+	This would allow you to replay the log up to the mkfs mark and
+	then replay from that point on doing the fsck check in the
+	interval that you want.
+
+	Every log has a mark at the end labeled "dm-log-writes-end".
+
+Userspace component
+===================
+
+There is a userspace tool that will replay the log for you in various ways.
+It can be found here: https://github.com/josefbacik/log-writes
+
+Example usage
+=============
+
+Say you want to test fsync on your file system.  You would do something like
+this::
+
+  TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
+  dmsetup create log --table "$TABLE"
+  mkfs.btrfs -f /dev/mapper/log
+  dmsetup message log 0 mark mkfs
+
+  mount /dev/mapper/log /mnt/btrfs-test
+  <some test that does fsync at the end>
+  dmsetup message log 0 mark fsync
+  md5sum /mnt/btrfs-test/foo
+  umount /mnt/btrfs-test
+
+  dmsetup remove log
+  replay-log --log /dev/sdc --replay /dev/sdb --end-mark fsync
+  mount /dev/sdb /mnt/btrfs-test
+  md5sum /mnt/btrfs-test/foo
+  <verify md5sum's are correct>
+
+  Another option is to do a complicated file system operation and verify the file
+  system is consistent during the entire operation.  You could do this with:
+
+  TABLE="0 $(blockdev --getsz /dev/sdb) log-writes /dev/sdb /dev/sdc"
+  dmsetup create log --table "$TABLE"
+  mkfs.btrfs -f /dev/mapper/log
+  dmsetup message log 0 mark mkfs
+
+  mount /dev/mapper/log /mnt/btrfs-test
+  <fsstress to dirty the fs>
+  btrfs filesystem balance /mnt/btrfs-test
+  umount /mnt/btrfs-test
+  dmsetup remove log
+
+  replay-log --log /dev/sdc --replay /dev/sdb --end-mark mkfs
+  btrfsck /dev/sdb
+  replay-log --log /dev/sdc --replay /dev/sdb --start-mark mkfs \
+	--fsck "btrfsck /dev/sdb" --check fua
+
+And that will replay the log until it sees a FUA request, run the fsck command
+and if the fsck passes it will replay to the next FUA, until it is completed or
+the fsck command exists abnormally.
diff --git a/Documentation/admin-guide/device-mapper/persistent-data.rst b/Documentation/admin-guide/device-mapper/persistent-data.rst
new file mode 100644
index 000000000000..2065c3c5a091
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/persistent-data.rst
@@ -0,0 +1,88 @@
+===============
+Persistent data
+===============
+
+Introduction
+============
+
+The more-sophisticated device-mapper targets require complex metadata
+that is managed in kernel.  In late 2010 we were seeing that various
+different targets were rolling their own data structures, for example:
+
+- Mikulas Patocka's multisnap implementation
+- Heinz Mauelshagen's thin provisioning target
+- Another btree-based caching target posted to dm-devel
+- Another multi-snapshot target based on a design of Daniel Phillips
+
+Maintaining these data structures takes a lot of work, so if possible
+we'd like to reduce the number.
+
+The persistent-data library is an attempt to provide a re-usable
+framework for people who want to store metadata in device-mapper
+targets.  It's currently used by the thin-provisioning target and an
+upcoming hierarchical storage target.
+
+Overview
+========
+
+The main documentation is in the header files which can all be found
+under drivers/md/persistent-data.
+
+The block manager
+-----------------
+
+dm-block-manager.[hc]
+
+This provides access to the data on disk in fixed sized-blocks.  There
+is a read/write locking interface to prevent concurrent accesses, and
+keep data that is being used in the cache.
+
+Clients of persistent-data are unlikely to use this directly.
+
+The transaction manager
+-----------------------
+
+dm-transaction-manager.[hc]
+
+This restricts access to blocks and enforces copy-on-write semantics.
+The only way you can get hold of a writable block through the
+transaction manager is by shadowing an existing block (ie. doing
+copy-on-write) or allocating a fresh one.  Shadowing is elided within
+the same transaction so performance is reasonable.  The commit method
+ensures that all data is flushed before it writes the superblock.
+On power failure your metadata will be as it was when last committed.
+
+The Space Maps
+--------------
+
+dm-space-map.h
+dm-space-map-metadata.[hc]
+dm-space-map-disk.[hc]
+
+On-disk data structures that keep track of reference counts of blocks.
+Also acts as the allocator of new blocks.  Currently two
+implementations: a simpler one for managing blocks on a different
+device (eg. thinly-provisioned data blocks); and one for managing
+the metadata space.  The latter is complicated by the need to store
+its own data within the space it's managing.
+
+The data structures
+-------------------
+
+dm-btree.[hc]
+dm-btree-remove.c
+dm-btree-spine.c
+dm-btree-internal.h
+
+Currently there is only one data structure, a hierarchical btree.
+There are plans to add more.  For example, something with an
+array-like interface would see a lot of use.
+
+The btree is 'hierarchical' in that you can define it to be composed
+of nested btrees, and take multiple keys.  For example, the
+thin-provisioning target uses a btree with two levels of nesting.
+The first maps a device id to a mapping tree, and that in turn maps a
+virtual block to a physical block.
+
+Values stored in the btrees can have arbitrary size.  Keys are always
+64bits, although nesting allows you to use multiple keys.
diff --git a/Documentation/admin-guide/device-mapper/snapshot.rst b/Documentation/admin-guide/device-mapper/snapshot.rst
new file mode 100644
index 000000000000..ccdd8b587a74
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/snapshot.rst
@@ -0,0 +1,196 @@
+==============================
+Device-mapper snapshot support
+==============================
+
+Device-mapper allows you, without massive data copying:
+
+-  To create snapshots of any block device i.e. mountable, saved states of
+   the block device which are also writable without interfering with the
+   original content;
+-  To create device "forks", i.e. multiple different versions of the
+   same data stream.
+-  To merge a snapshot of a block device back into the snapshot's origin
+   device.
+
+In the first two cases, dm copies only the chunks of data that get
+changed and uses a separate copy-on-write (COW) block device for
+storage.
+
+For snapshot merge the contents of the COW storage are merged back into
+the origin device.
+
+
+There are three dm targets available:
+snapshot, snapshot-origin, and snapshot-merge.
+
+-  snapshot-origin <origin>
+
+which will normally have one or more snapshots based on it.
+Reads will be mapped directly to the backing device. For each write, the
+original data will be saved in the <COW device> of each snapshot to keep
+its visible content unchanged, at least until the <COW device> fills up.
+
+
+-  snapshot <origin> <COW device> <persistent?> <chunksize>
+   [<# feature args> [<arg>]*]
+
+A snapshot of the <origin> block device is created. Changed chunks of
+<chunksize> sectors will be stored on the <COW device>.  Writes will
+only go to the <COW device>.  Reads will come from the <COW device> or
+from <origin> for unchanged data.  <COW device> will often be
+smaller than the origin and if it fills up the snapshot will become
+useless and be disabled, returning errors.  So it is important to monitor
+the amount of free space and expand the <COW device> before it fills up.
+
+<persistent?> is P (Persistent) or N (Not persistent - will not survive
+after reboot).  O (Overflow) can be added as a persistent store option
+to allow userspace to advertise its support for seeing "Overflow" in the
+snapshot status.  So supported store types are "P", "PO" and "N".
+
+The difference between persistent and transient is with transient
+snapshots less metadata must be saved on disk - they can be kept in
+memory by the kernel.
+
+When loading or unloading the snapshot target, the corresponding
+snapshot-origin or snapshot-merge target must be suspended. A failure to
+suspend the origin target could result in data corruption.
+
+Optional features:
+
+   discard_zeroes_cow - a discard issued to the snapshot device that
+   maps to entire chunks to will zero the corresponding exception(s) in
+   the snapshot's exception store.
+
+   discard_passdown_origin - a discard to the snapshot device is passed
+   down to the snapshot-origin's underlying device.  This doesn't cause
+   copy-out to the snapshot exception store because the snapshot-origin
+   target is bypassed.
+
+   The discard_passdown_origin feature depends on the discard_zeroes_cow
+   feature being enabled.
+
+
+-  snapshot-merge <origin> <COW device> <persistent> <chunksize>
+   [<# feature args> [<arg>]*]
+
+takes the same table arguments as the snapshot target except it only
+works with persistent snapshots.  This target assumes the role of the
+"snapshot-origin" target and must not be loaded if the "snapshot-origin"
+is still present for <origin>.
+
+Creates a merging snapshot that takes control of the changed chunks
+stored in the <COW device> of an existing snapshot, through a handover
+procedure, and merges these chunks back into the <origin>.  Once merging
+has started (in the background) the <origin> may be opened and the merge
+will continue while I/O is flowing to it.  Changes to the <origin> are
+deferred until the merging snapshot's corresponding chunk(s) have been
+merged.  Once merging has started the snapshot device, associated with
+the "snapshot" target, will return -EIO when accessed.
+
+
+How snapshot is used by LVM2
+============================
+When you create the first LVM2 snapshot of a volume, four dm devices are used:
+
+1) a device containing the original mapping table of the source volume;
+2) a device used as the <COW device>;
+3) a "snapshot" device, combining #1 and #2, which is the visible snapshot
+   volume;
+4) the "original" volume (which uses the device number used by the original
+   source volume), whose table is replaced by a "snapshot-origin" mapping
+   from device #1.
+
+A fixed naming scheme is used, so with the following commands::
+
+  lvcreate -L 1G -n base volumeGroup
+  lvcreate -L 100M --snapshot -n snap volumeGroup/base
+
+we'll have this situation (with volumes in above order)::
+
+  # dmsetup table|grep volumeGroup
+
+  volumeGroup-base-real: 0 2097152 linear 8:19 384
+  volumeGroup-snap-cow: 0 204800 linear 8:19 2097536
+  volumeGroup-snap: 0 2097152 snapshot 254:11 254:12 P 16
+  volumeGroup-base: 0 2097152 snapshot-origin 254:11
+
+  # ls -lL /dev/mapper/volumeGroup-*
+  brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+  brw-------  1 root root 254, 12 29 ago 18:15 /dev/mapper/volumeGroup-snap-cow
+  brw-------  1 root root 254, 13 29 ago 18:15 /dev/mapper/volumeGroup-snap
+  brw-------  1 root root 254, 10 29 ago 18:14 /dev/mapper/volumeGroup-base
+
+
+How snapshot-merge is used by LVM2
+==================================
+A merging snapshot assumes the role of the "snapshot-origin" while
+merging.  As such the "snapshot-origin" is replaced with
+"snapshot-merge".  The "-real" device is not changed and the "-cow"
+device is renamed to <origin name>-cow to aid LVM2's cleanup of the
+merging snapshot after it completes.  The "snapshot" that hands over its
+COW device to the "snapshot-merge" is deactivated (unless using lvchange
+--refresh); but if it is left active it will simply return I/O errors.
+
+A snapshot will merge into its origin with the following command::
+
+  lvconvert --merge volumeGroup/snap
+
+we'll now have this situation::
+
+  # dmsetup table|grep volumeGroup
+
+  volumeGroup-base-real: 0 2097152 linear 8:19 384
+  volumeGroup-base-cow: 0 204800 linear 8:19 2097536
+  volumeGroup-base: 0 2097152 snapshot-merge 254:11 254:12 P 16
+
+  # ls -lL /dev/mapper/volumeGroup-*
+  brw-------  1 root root 254, 11 29 ago 18:15 /dev/mapper/volumeGroup-base-real
+  brw-------  1 root root 254, 12 29 ago 18:16 /dev/mapper/volumeGroup-base-cow
+  brw-------  1 root root 254, 10 29 ago 18:16 /dev/mapper/volumeGroup-base
+
+
+How to determine when a merging is complete
+===========================================
+The snapshot-merge and snapshot status lines end with:
+
+  <sectors_allocated>/<total_sectors> <metadata_sectors>
+
+Both <sectors_allocated> and <total_sectors> include both data and metadata.
+During merging, the number of sectors allocated gets smaller and
+smaller.  Merging has finished when the number of sectors holding data
+is zero, in other words <sectors_allocated> == <metadata_sectors>.
+
+Here is a practical example (using a hybrid of lvm and dmsetup commands)::
+
+  # lvs
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup owi-a- 4.00g
+    snap    volumeGroup swi-a- 1.00g base  18.97
+
+  # dmsetup status volumeGroup-snap
+  0 8388608 snapshot 397896/2097152 1560
+                                    ^^^^ metadata sectors
+
+  # lvconvert --merge -b volumeGroup/snap
+    Merging of volume snap started.
+
+  # lvs volumeGroup/snap
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup Owi-a- 4.00g          17.23
+
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 281688/2097152 1104
+
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 180480/2097152 712
+
+  # dmsetup status volumeGroup-base
+  0 8388608 snapshot-merge 16/2097152 16
+
+Merging has finished.
+
+::
+
+  # lvs
+    LV      VG          Attr   LSize Origin  Snap%  Move Log Copy%  Convert
+    base    volumeGroup owi-a- 4.00g
diff --git a/Documentation/admin-guide/device-mapper/statistics.rst b/Documentation/admin-guide/device-mapper/statistics.rst
new file mode 100644
index 000000000000..3d80a9f850cc
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/statistics.rst
@@ -0,0 +1,225 @@
+=============
+DM statistics
+=============
+
+Device Mapper supports the collection of I/O statistics on user-defined
+regions of a DM device.	 If no regions are defined no statistics are
+collected so there isn't any performance impact.  Only bio-based DM
+devices are currently supported.
+
+Each user-defined region specifies a starting sector, length and step.
+Individual statistics will be collected for each step-sized area within
+the range specified.
+
+The I/O statistics counters for each step-sized area of a region are
+in the same format as `/sys/block/*/stat` or `/proc/diskstats` (see:
+Documentation/iostats.txt).  But two extra counters (12 and 13) are
+provided: total time spent reading and writing.  When the histogram
+argument is used, the 14th parameter is reported that represents the
+histogram of latencies.  All these counters may be accessed by sending
+the @stats_print message to the appropriate DM device via dmsetup.
+
+The reported times are in milliseconds and the granularity depends on
+the kernel ticks.  When the option precise_timestamps is used, the
+reported times are in nanoseconds.
+
+Each region has a corresponding unique identifier, which we call a
+region_id, that is assigned when the region is created.	 The region_id
+must be supplied when querying statistics about the region, deleting the
+region, etc.  Unique region_ids enable multiple userspace programs to
+request and process statistics for the same DM device without stepping
+on each other's data.
+
+The creation of DM statistics will allocate memory via kmalloc or
+fallback to using vmalloc space.  At most, 1/4 of the overall system
+memory may be allocated by DM statistics.  The admin can see how much
+memory is used by reading:
+
+	/sys/module/dm_mod/parameters/stats_current_allocated_bytes
+
+Messages
+========
+
+    @stats_create <range> <step> [<number_of_optional_arguments> <optional_arguments>...] [<program_id> [<aux_data>]]
+	Create a new region and return the region_id.
+
+	<range>
+	  "-"
+		whole device
+	  "<start_sector>+<length>"
+		a range of <length> 512-byte sectors
+		starting with <start_sector>.
+
+	<step>
+	  "<area_size>"
+		the range is subdivided into areas each containing
+		<area_size> sectors.
+	  "/<number_of_areas>"
+		the range is subdivided into the specified
+		number of areas.
+
+	<number_of_optional_arguments>
+	  The number of optional arguments
+
+	<optional_arguments>
+	  The following optional arguments are supported:
+
+	  precise_timestamps
+		use precise timer with nanosecond resolution
+		instead of the "jiffies" variable.  When this argument is
+		used, the resulting times are in nanoseconds instead of
+		milliseconds.  Precise timestamps are a little bit slower
+		to obtain than jiffies-based timestamps.
+	  histogram:n1,n2,n3,n4,...
+		collect histogram of latencies.  The
+		numbers n1, n2, etc are times that represent the boundaries
+		of the histogram.  If precise_timestamps is not used, the
+		times are in milliseconds, otherwise they are in
+		nanoseconds.  For each range, the kernel will report the
+		number of requests that completed within this range. For
+		example, if we use "histogram:10,20,30", the kernel will
+		report four numbers a:b:c:d. a is the number of requests
+		that took 0-10 ms to complete, b is the number of requests
+		that took 10-20 ms to complete, c is the number of requests
+		that took 20-30 ms to complete and d is the number of
+		requests that took more than 30 ms to complete.
+
+	<program_id>
+	  An optional parameter.  A name that uniquely identifies
+	  the userspace owner of the range.  This groups ranges together
+	  so that userspace programs can identify the ranges they
+	  created and ignore those created by others.
+	  The kernel returns this string back in the output of
+	  @stats_list message, but it doesn't use it for anything else.
+	  If we omit the number of optional arguments, program id must not
+	  be a number, otherwise it would be interpreted as the number of
+	  optional arguments.
+
+	<aux_data>
+	  An optional parameter.  A word that provides auxiliary data
+	  that is useful to the client program that created the range.
+	  The kernel returns this string back in the output of
+	  @stats_list message, but it doesn't use this value for anything.
+
+    @stats_delete <region_id>
+	Delete the region with the specified id.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+    @stats_clear <region_id>
+	Clear all the counters except the in-flight i/o counters.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+    @stats_list [<program_id>]
+	List all regions registered with @stats_create.
+
+	<program_id>
+	  An optional parameter.
+	  If this parameter is specified, only matching regions
+	  are returned.
+	  If it is not specified, all regions are returned.
+
+	Output format:
+	  <region_id>: <start_sector>+<length> <step> <program_id> <aux_data>
+	        precise_timestamps histogram:n1,n2,n3,...
+
+	The strings "precise_timestamps" and "histogram" are printed only
+	if they were specified when creating the region.
+
+    @stats_print <region_id> [<starting_line> <number_of_lines>]
+	Print counters for each step-sized area of a region.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<starting_line>
+	  The index of the starting line in the output.
+	  If omitted, all lines are returned.
+
+	<number_of_lines>
+	  The number of lines to include in the output.
+	  If omitted, all lines are returned.
+
+	Output format for each step-sized area of a region:
+
+	  <start_sector>+<length>
+		counters
+
+	  The first 11 counters have the same meaning as
+	  `/sys/block/*/stat or /proc/diskstats`.
+
+	  Please refer to Documentation/iostats.txt for details.
+
+	  1. the number of reads completed
+	  2. the number of reads merged
+	  3. the number of sectors read
+	  4. the number of milliseconds spent reading
+	  5. the number of writes completed
+	  6. the number of writes merged
+	  7. the number of sectors written
+	  8. the number of milliseconds spent writing
+	  9. the number of I/Os currently in progress
+	  10. the number of milliseconds spent doing I/Os
+	  11. the weighted number of milliseconds spent doing I/Os
+
+	  Additional counters:
+
+	  12. the total time spent reading in milliseconds
+	  13. the total time spent writing in milliseconds
+
+    @stats_print_clear <region_id> [<starting_line> <number_of_lines>]
+	Atomically print and then clear all the counters except the
+	in-flight i/o counters.	 Useful when the client consuming the
+	statistics does not want to lose any statistics (those updated
+	between printing and clearing).
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<starting_line>
+	  The index of the starting line in the output.
+	  If omitted, all lines are printed and then cleared.
+
+	<number_of_lines>
+	  The number of lines to process.
+	  If omitted, all lines are printed and then cleared.
+
+    @stats_set_aux <region_id> <aux_data>
+	Store auxiliary data aux_data for the specified region.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<aux_data>
+	  The string that identifies data which is useful to the client
+	  program that created the range.  The kernel returns this
+	  string back in the output of @stats_list message, but it
+	  doesn't use this value for anything.
+
+Examples
+========
+
+Subdivide the DM device 'vol' into 100 pieces and start collecting
+statistics on them::
+
+  dmsetup message vol 0 @stats_create - /100
+
+Set the auxiliary data string to "foo bar baz" (the escape for each
+space must also be escaped, otherwise the shell will consume them)::
+
+  dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz
+
+List the statistics::
+
+  dmsetup message vol 0 @stats_list
+
+Print the statistics::
+
+  dmsetup message vol 0 @stats_print 0
+
+Delete the statistics::
+
+  dmsetup message vol 0 @stats_delete 0
diff --git a/Documentation/admin-guide/device-mapper/striped.rst b/Documentation/admin-guide/device-mapper/striped.rst
new file mode 100644
index 000000000000..e9a8da192ae1
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/striped.rst
@@ -0,0 +1,61 @@
+=========
+dm-stripe
+=========
+
+Device-Mapper's "striped" target is used to create a striped (i.e. RAID-0)
+device across one or more underlying devices. Data is written in "chunks",
+with consecutive chunks rotating among the underlying devices. This can
+potentially provide improved I/O throughput by utilizing several physical
+devices in parallel.
+
+Parameters: <num devs> <chunk size> [<dev path> <offset>]+
+    <num devs>:
+	Number of underlying devices.
+    <chunk size>:
+	Size of each chunk of data. Must be at least as
+        large as the system's PAGE_SIZE.
+    <dev path>:
+	Full pathname to the underlying block-device, or a
+	"major:minor" device-number.
+    <offset>:
+	Starting sector within the device.
+
+One or more underlying devices can be specified. The striped device size must
+be a multiple of the chunk size multiplied by the number of underlying devices.
+
+
+Example scripts
+===============
+
+::
+
+  #!/usr/bin/perl -w
+  # Create a striped device across any number of underlying devices. The device
+  # will be called "stripe_dev" and have a chunk-size of 128k.
+
+  my $chunk_size = 128 * 2;
+  my $dev_name = "stripe_dev";
+  my $num_devs = @ARGV;
+  my @devs = @ARGV;
+  my ($min_dev_size, $stripe_dev_size, $i);
+
+  if (!$num_devs) {
+          die("Specify at least one device\n");
+  }
+
+  $min_dev_size = `blockdev --getsz $devs[0]`;
+  for ($i = 1; $i < $num_devs; $i++) {
+          my $this_size = `blockdev --getsz $devs[$i]`;
+          $min_dev_size = ($min_dev_size < $this_size) ?
+                          $min_dev_size : $this_size;
+  }
+
+  $stripe_dev_size = $min_dev_size * $num_devs;
+  $stripe_dev_size -= $stripe_dev_size % ($chunk_size * $num_devs);
+
+  $table = "0 $stripe_dev_size striped $num_devs $chunk_size";
+  for ($i = 0; $i < $num_devs; $i++) {
+          $table .= " $devs[$i] 0";
+  }
+
+  `echo $table | dmsetup create $dev_name`;
diff --git a/Documentation/admin-guide/device-mapper/switch.rst b/Documentation/admin-guide/device-mapper/switch.rst
new file mode 100644
index 000000000000..7dde06be1a4f
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/switch.rst
@@ -0,0 +1,141 @@
+=========
+dm-switch
+=========
+
+The device-mapper switch target creates a device that supports an
+arbitrary mapping of fixed-size regions of I/O across a fixed set of
+paths.  The path used for any specific region can be switched
+dynamically by sending the target a message.
+
+It maps I/O to underlying block devices efficiently when there is a large
+number of fixed-sized address regions but there is no simple pattern
+that would allow for a compact representation of the mapping such as
+dm-stripe.
+
+Background
+----------
+
+Dell EqualLogic and some other iSCSI storage arrays use a distributed
+frameless architecture.  In this architecture, the storage group
+consists of a number of distinct storage arrays ("members") each having
+independent controllers, disk storage and network adapters.  When a LUN
+is created it is spread across multiple members.  The details of the
+spreading are hidden from initiators connected to this storage system.
+The storage group exposes a single target discovery portal, no matter
+how many members are being used.  When iSCSI sessions are created, each
+session is connected to an eth port on a single member.  Data to a LUN
+can be sent on any iSCSI session, and if the blocks being accessed are
+stored on another member the I/O will be forwarded as required.  This
+forwarding is invisible to the initiator.  The storage layout is also
+dynamic, and the blocks stored on disk may be moved from member to
+member as needed to balance the load.
+
+This architecture simplifies the management and configuration of both
+the storage group and initiators.  In a multipathing configuration, it
+is possible to set up multiple iSCSI sessions to use multiple network
+interfaces on both the host and target to take advantage of the
+increased network bandwidth.  An initiator could use a simple round
+robin algorithm to send I/O across all paths and let the storage array
+members forward it as necessary, but there is a performance advantage to
+sending data directly to the correct member.
+
+A device-mapper table already lets you map different regions of a
+device onto different targets.  However in this architecture the LUN is
+spread with an address region size on the order of 10s of MBs, which
+means the resulting table could have more than a million entries and
+consume far too much memory.
+
+Using this device-mapper switch target we can now build a two-layer
+device hierarchy:
+
+    Upper Tier - Determine which array member the I/O should be sent to.
+    Lower Tier - Load balance amongst paths to a particular member.
+
+The lower tier consists of a single dm multipath device for each member.
+Each of these multipath devices contains the set of paths directly to
+the array member in one priority group, and leverages existing path
+selectors to load balance amongst these paths.  We also build a
+non-preferred priority group containing paths to other array members for
+failover reasons.
+
+The upper tier consists of a single dm-switch device.  This device uses
+a bitmap to look up the location of the I/O and choose the appropriate
+lower tier device to route the I/O.  By using a bitmap we are able to
+use 4 bits for each address range in a 16 member group (which is very
+large for us).  This is a much denser representation than the dm table
+b-tree can achieve.
+
+Construction Parameters
+=======================
+
+    <num_paths> <region_size> <num_optional_args> [<optional_args>...] [<dev_path> <offset>]+
+	<num_paths>
+	    The number of paths across which to distribute the I/O.
+
+	<region_size>
+	    The number of 512-byte sectors in a region. Each region can be redirected
+	    to any of the available paths.
+
+	<num_optional_args>
+	    The number of optional arguments. Currently, no optional arguments
+	    are supported and so this must be zero.
+
+	<dev_path>
+	    The block device that represents a specific path to the device.
+
+	<offset>
+	    The offset of the start of data on the specific <dev_path> (in units
+	    of 512-byte sectors). This number is added to the sector number when
+	    forwarding the request to the specific path. Typically it is zero.
+
+Messages
+========
+
+set_region_mappings <index>:<path_nr> [<index>]:<path_nr> [<index>]:<path_nr>...
+
+Modify the region table by specifying which regions are redirected to
+which paths.
+
+<index>
+    The region number (region size was specified in constructor parameters).
+    If index is omitted, the next region (previous index + 1) is used.
+    Expressed in hexadecimal (WITHOUT any prefix like 0x).
+
+<path_nr>
+    The path number in the range 0 ... (<num_paths> - 1).
+    Expressed in hexadecimal (WITHOUT any prefix like 0x).
+
+R<n>,<m>
+    This parameter allows repetitive patterns to be loaded quickly. <n> and <m>
+    are hexadecimal numbers. The last <n> mappings are repeated in the next <m>
+    slots.
+
+Status
+======
+
+No status line is reported.
+
+Example
+=======
+
+Assume that you have volumes vg1/switch0 vg1/switch1 vg1/switch2 with
+the same size.
+
+Create a switch device with 64kB region size::
+
+    dmsetup create switch --table "0 `blockdev --getsz /dev/vg1/switch0`
+	switch 3 128 0 /dev/vg1/switch0 0 /dev/vg1/switch1 0 /dev/vg1/switch2 0"
+
+Set mappings for the first 7 entries to point to devices switch0, switch1,
+switch2, switch0, switch1, switch2, switch1::
+
+    dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1
+
+Set repetitive mapping. This command::
+
+    dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10
+
+is equivalent to::
+
+    dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \
+	:1 :2 :1 :2 :1 :2 :1 :2 :1 :2
diff --git a/Documentation/admin-guide/device-mapper/thin-provisioning.rst b/Documentation/admin-guide/device-mapper/thin-provisioning.rst
new file mode 100644
index 000000000000..bafebf79da4b
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/thin-provisioning.rst
@@ -0,0 +1,427 @@
+=================
+Thin provisioning
+=================
+
+Introduction
+============
+
+This document describes a collection of device-mapper targets that
+between them implement thin-provisioning and snapshots.
+
+The main highlight of this implementation, compared to the previous
+implementation of snapshots, is that it allows many virtual devices to
+be stored on the same data volume.  This simplifies administration and
+allows the sharing of data between volumes, thus reducing disk usage.
+
+Another significant feature is support for an arbitrary depth of
+recursive snapshots (snapshots of snapshots of snapshots ...).  The
+previous implementation of snapshots did this by chaining together
+lookup tables, and so performance was O(depth).  This new
+implementation uses a single data structure to avoid this degradation
+with depth.  Fragmentation may still be an issue, however, in some
+scenarios.
+
+Metadata is stored on a separate device from data, giving the
+administrator some freedom, for example to:
+
+- Improve metadata resilience by storing metadata on a mirrored volume
+  but data on a non-mirrored one.
+
+- Improve performance by storing the metadata on SSD.
+
+Status
+======
+
+These targets are considered safe for production use.  But different use
+cases will have different performance characteristics, for example due
+to fragmentation of the data volume.
+
+If you find this software is not performing as expected please mail
+dm-devel@redhat.com with details and we'll try our best to improve
+things for you.
+
+Userspace tools for checking and repairing the metadata have been fully
+developed and are available as 'thin_check' and 'thin_repair'.  The name
+of the package that provides these utilities varies by distribution (on
+a Red Hat distribution it is named 'device-mapper-persistent-data').
+
+Cookbook
+========
+
+This section describes some quick recipes for using thin provisioning.
+They use the dmsetup program to control the device-mapper driver
+directly.  End users will be advised to use a higher-level volume
+manager such as LVM2 once support has been added.
+
+Pool device
+-----------
+
+The pool device ties together the metadata volume and the data volume.
+It maps I/O linearly to the data volume and updates the metadata via
+two mechanisms:
+
+- Function calls from the thin targets
+
+- Device-mapper 'messages' from userspace which control the creation of new
+  virtual devices amongst other things.
+
+Setting up a fresh pool device
+------------------------------
+
+Setting up a pool device requires a valid metadata device, and a
+data device.  If you do not have an existing metadata device you can
+make one by zeroing the first 4k to indicate empty metadata.
+
+    dd if=/dev/zero of=$metadata_dev bs=4096 count=1
+
+The amount of metadata you need will vary according to how many blocks
+are shared between thin devices (i.e. through snapshots).  If you have
+less sharing than average you'll need a larger-than-average metadata device.
+
+As a guide, we suggest you calculate the number of bytes to use in the
+metadata device as 48 * $data_dev_size / $data_block_size but round it up
+to 2MB if the answer is smaller.  If you're creating large numbers of
+snapshots which are recording large amounts of change, you may find you
+need to increase this.
+
+The largest size supported is 16GB: If the device is larger,
+a warning will be issued and the excess space will not be used.
+
+Reloading a pool table
+----------------------
+
+You may reload a pool's table, indeed this is how the pool is resized
+if it runs out of space.  (N.B. While specifying a different metadata
+device when reloading is not forbidden at the moment, things will go
+wrong if it does not route I/O to exactly the same on-disk location as
+previously.)
+
+Using an existing pool device
+-----------------------------
+
+::
+
+    dmsetup create pool \
+	--table "0 20971520 thin-pool $metadata_dev $data_dev \
+		 $data_block_size $low_water_mark"
+
+$data_block_size gives the smallest unit of disk space that can be
+allocated at a time expressed in units of 512-byte sectors.
+$data_block_size must be between 128 (64KB) and 2097152 (1GB) and a
+multiple of 128 (64KB).  $data_block_size cannot be changed after the
+thin-pool is created.  People primarily interested in thin provisioning
+may want to use a value such as 1024 (512KB).  People doing lots of
+snapshotting may want a smaller value such as 128 (64KB).  If you are
+not zeroing newly-allocated data, a larger $data_block_size in the
+region of 256000 (128MB) is suggested.
+
+$low_water_mark is expressed in blocks of size $data_block_size.  If
+free space on the data device drops below this level then a dm event
+will be triggered which a userspace daemon should catch allowing it to
+extend the pool device.  Only one such event will be sent.
+
+No special event is triggered if a just resumed device's free space is below
+the low water mark. However, resuming a device always triggers an
+event; a userspace daemon should verify that free space exceeds the low
+water mark when handling this event.
+
+A low water mark for the metadata device is maintained in the kernel and
+will trigger a dm event if free space on the metadata device drops below
+it.
+
+Updating on-disk metadata
+-------------------------
+
+On-disk metadata is committed every time a FLUSH or FUA bio is written.
+If no such requests are made then commits will occur every second.  This
+means the thin-provisioning target behaves like a physical disk that has
+a volatile write cache.  If power is lost you may lose some recent
+writes.  The metadata should always be consistent in spite of any crash.
+
+If data space is exhausted the pool will either error or queue IO
+according to the configuration (see: error_if_no_space).  If metadata
+space is exhausted or a metadata operation fails: the pool will error IO
+until the pool is taken offline and repair is performed to 1) fix any
+potential inconsistencies and 2) clear the flag that imposes repair.
+Once the pool's metadata device is repaired it may be resized, which
+will allow the pool to return to normal operation.  Note that if a pool
+is flagged as needing repair, the pool's data and metadata devices
+cannot be resized until repair is performed.  It should also be noted
+that when the pool's metadata space is exhausted the current metadata
+transaction is aborted.  Given that the pool will cache IO whose
+completion may have already been acknowledged to upper IO layers
+(e.g. filesystem) it is strongly suggested that consistency checks
+(e.g. fsck) be performed on those layers when repair of the pool is
+required.
+
+Thin provisioning
+-----------------
+
+i) Creating a new thinly-provisioned volume.
+
+  To create a new thinly- provisioned volume you must send a message to an
+  active pool device, /dev/mapper/pool in this example::
+
+    dmsetup message /dev/mapper/pool 0 "create_thin 0"
+
+  Here '0' is an identifier for the volume, a 24-bit number.  It's up
+  to the caller to allocate and manage these identifiers.  If the
+  identifier is already in use, the message will fail with -EEXIST.
+
+ii) Using a thinly-provisioned volume.
+
+  Thinly-provisioned volumes are activated using the 'thin' target::
+
+    dmsetup create thin --table "0 2097152 thin /dev/mapper/pool 0"
+
+  The last parameter is the identifier for the thinp device.
+
+Internal snapshots
+------------------
+
+i) Creating an internal snapshot.
+
+  Snapshots are created with another message to the pool.
+
+  N.B.  If the origin device that you wish to snapshot is active, you
+  must suspend it before creating the snapshot to avoid corruption.
+  This is NOT enforced at the moment, so please be careful!
+
+  ::
+
+    dmsetup suspend /dev/mapper/thin
+    dmsetup message /dev/mapper/pool 0 "create_snap 1 0"
+    dmsetup resume /dev/mapper/thin
+
+  Here '1' is the identifier for the volume, a 24-bit number.  '0' is the
+  identifier for the origin device.
+
+ii) Using an internal snapshot.
+
+  Once created, the user doesn't have to worry about any connection
+  between the origin and the snapshot.  Indeed the snapshot is no
+  different from any other thinly-provisioned device and can be
+  snapshotted itself via the same method.  It's perfectly legal to
+  have only one of them active, and there's no ordering requirement on
+  activating or removing them both.  (This differs from conventional
+  device-mapper snapshots.)
+
+  Activate it exactly the same way as any other thinly-provisioned volume::
+
+    dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 1"
+
+External snapshots
+------------------
+
+You can use an external **read only** device as an origin for a
+thinly-provisioned volume.  Any read to an unprovisioned area of the
+thin device will be passed through to the origin.  Writes trigger
+the allocation of new blocks as usual.
+
+One use case for this is VM hosts that want to run guests on
+thinly-provisioned volumes but have the base image on another device
+(possibly shared between many VMs).
+
+You must not write to the origin device if you use this technique!
+Of course, you may write to the thin device and take internal snapshots
+of the thin volume.
+
+i) Creating a snapshot of an external device
+
+  This is the same as creating a thin device.
+  You don't mention the origin at this stage.
+
+  ::
+
+    dmsetup message /dev/mapper/pool 0 "create_thin 0"
+
+ii) Using a snapshot of an external device.
+
+  Append an extra parameter to the thin target specifying the origin::
+
+    dmsetup create snap --table "0 2097152 thin /dev/mapper/pool 0 /dev/image"
+
+  N.B. All descendants (internal snapshots) of this snapshot require the
+  same extra origin parameter.
+
+Deactivation
+------------
+
+All devices using a pool must be deactivated before the pool itself
+can be.
+
+::
+
+    dmsetup remove thin
+    dmsetup remove snap
+    dmsetup remove pool
+
+Reference
+=========
+
+'thin-pool' target
+------------------
+
+i) Constructor
+
+    ::
+
+      thin-pool <metadata dev> <data dev> <data block size (sectors)> \
+	        <low water mark (blocks)> [<number of feature args> [<arg>]*]
+
+    Optional feature arguments:
+
+      skip_block_zeroing:
+	Skip the zeroing of newly-provisioned blocks.
+
+      ignore_discard:
+	Disable discard support.
+
+      no_discard_passdown:
+	Don't pass discards down to the underlying
+	data device, but just remove the mapping.
+
+      read_only:
+		 Don't allow any changes to be made to the pool
+		 metadata.  This mode is only available after the
+		 thin-pool has been created and first used in full
+		 read/write mode.  It cannot be specified on initial
+		 thin-pool creation.
+
+      error_if_no_space:
+	Error IOs, instead of queueing, if no space.
+
+    Data block size must be between 64KB (128 sectors) and 1GB
+    (2097152 sectors) inclusive.
+
+
+ii) Status
+
+    ::
+
+      <transaction id> <used metadata blocks>/<total metadata blocks>
+      <used data blocks>/<total data blocks> <held metadata root>
+      ro|rw|out_of_data_space [no_]discard_passdown [error|queue]_if_no_space
+      needs_check|- metadata_low_watermark
+
+    transaction id:
+	A 64-bit number used by userspace to help synchronise with metadata
+	from volume managers.
+
+    used data blocks / total data blocks
+	If the number of free blocks drops below the pool's low water mark a
+	dm event will be sent to userspace.  This event is edge-triggered and
+	it will occur only once after each resume so volume manager writers
+	should register for the event and then check the target's status.
+
+    held metadata root:
+	The location, in blocks, of the metadata root that has been
+	'held' for userspace read access.  '-' indicates there is no
+	held root.
+
+    discard_passdown|no_discard_passdown
+	Whether or not discards are actually being passed down to the
+	underlying device.  When this is enabled when loading the table,
+	it can get disabled if the underlying device doesn't support it.
+
+    ro|rw|out_of_data_space
+	If the pool encounters certain types of device failures it will
+	drop into a read-only metadata mode in which no changes to
+	the pool metadata (like allocating new blocks) are permitted.
+
+	In serious cases where even a read-only mode is deemed unsafe
+	no further I/O will be permitted and the status will just
+	contain the string 'Fail'.  The userspace recovery tools
+	should then be used.
+
+    error_if_no_space|queue_if_no_space
+	If the pool runs out of data or metadata space, the pool will
+	either queue or error the IO destined to the data device.  The
+	default is to queue the IO until more space is added or the
+	'no_space_timeout' expires.  The 'no_space_timeout' dm-thin-pool
+	module parameter can be used to change this timeout -- it
+	defaults to 60 seconds but may be disabled using a value of 0.
+
+    needs_check
+	A metadata operation has failed, resulting in the needs_check
+	flag being set in the metadata's superblock.  The metadata
+	device must be deactivated and checked/repaired before the
+	thin-pool can be made fully operational again.  '-' indicates
+	needs_check is not set.
+
+    metadata_low_watermark:
+	Value of metadata low watermark in blocks.  The kernel sets this
+	value internally but userspace needs to know this value to
+	determine if an event was caused by crossing this threshold.
+
+iii) Messages
+
+    create_thin <dev id>
+	Create a new thinly-provisioned device.
+	<dev id> is an arbitrary unique 24-bit identifier chosen by
+	the caller.
+
+    create_snap <dev id> <origin id>
+	Create a new snapshot of another thinly-provisioned device.
+	<dev id> is an arbitrary unique 24-bit identifier chosen by
+	the caller.
+	<origin id> is the identifier of the thinly-provisioned device
+	of which the new device will be a snapshot.
+
+    delete <dev id>
+	Deletes a thin device.  Irreversible.
+
+    set_transaction_id <current id> <new id>
+	Userland volume managers, such as LVM, need a way to
+	synchronise their external metadata with the internal metadata of the
+	pool target.  The thin-pool target offers to store an
+	arbitrary 64-bit transaction id and return it on the target's
+	status line.  To avoid races you must provide what you think
+	the current transaction id is when you change it with this
+	compare-and-swap message.
+
+    reserve_metadata_snap
+        Reserve a copy of the data mapping btree for use by userland.
+        This allows userland to inspect the mappings as they were when
+        this message was executed.  Use the pool's status command to
+        get the root block associated with the metadata snapshot.
+
+    release_metadata_snap
+        Release a previously reserved copy of the data mapping btree.
+
+'thin' target
+-------------
+
+i) Constructor
+
+    ::
+
+        thin <pool dev> <dev id> [<external origin dev>]
+
+    pool dev:
+	the thin-pool device, e.g. /dev/mapper/my_pool or 253:0
+
+    dev id:
+	the internal device identifier of the device to be
+	activated.
+
+    external origin dev:
+	an optional block device outside the pool to be treated as a
+	read-only snapshot origin: reads to unprovisioned areas of the
+	thin target will be mapped to this device.
+
+The pool doesn't store any size against the thin devices.  If you
+load a thin target that is smaller than you've been using previously,
+then you'll have no access to blocks mapped beyond the end.  If you
+load a target that is bigger than before, then extra blocks will be
+provisioned as and when needed.
+
+ii) Status
+
+    <nr mapped sectors> <highest mapped sector>
+	If the pool has encountered device errors and failed, the status
+	will just contain the string 'Fail'.  The userspace recovery
+	tools should then be used.
+
+    In the case where <nr mapped sectors> is 0, there is no highest
+    mapped sector and the value of <highest mapped sector> is unspecified.
diff --git a/Documentation/admin-guide/device-mapper/unstriped.rst b/Documentation/admin-guide/device-mapper/unstriped.rst
new file mode 100644
index 000000000000..0a8d3eb3f072
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/unstriped.rst
@@ -0,0 +1,135 @@
+================================
+Device-mapper "unstriped" target
+================================
+
+Introduction
+============
+
+The device-mapper "unstriped" target provides a transparent mechanism to
+unstripe a device-mapper "striped" target to access the underlying disks
+without having to touch the true backing block-device.  It can also be
+used to unstripe a hardware RAID-0 to access backing disks.
+
+Parameters:
+<number of stripes> <chunk size> <stripe #> <dev_path> <offset>
+
+<number of stripes>
+        The number of stripes in the RAID 0.
+
+<chunk size>
+	The amount of 512B sectors in the chunk striping.
+
+<dev_path>
+	The block device you wish to unstripe.
+
+<stripe #>
+        The stripe number within the device that corresponds to physical
+        drive you wish to unstripe.  This must be 0 indexed.
+
+
+Why use this module?
+====================
+
+An example of undoing an existing dm-stripe
+-------------------------------------------
+
+This small bash script will setup 4 loop devices and use the existing
+striped target to combine the 4 devices into one.  It then will use
+the unstriped target ontop of the striped device to access the
+individual backing loop devices.  We write data to the newly exposed
+unstriped devices and verify the data written matches the correct
+underlying device on the striped array::
+
+  #!/bin/bash
+
+  MEMBER_SIZE=$((128 * 1024 * 1024))
+  NUM=4
+  SEQ_END=$((${NUM}-1))
+  CHUNK=256
+  BS=4096
+
+  RAID_SIZE=$((${MEMBER_SIZE}*${NUM}/512))
+  DM_PARMS="0 ${RAID_SIZE} striped ${NUM} ${CHUNK}"
+  COUNT=$((${MEMBER_SIZE} / ${BS}))
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dd if=/dev/zero of=member-${i} bs=${MEMBER_SIZE} count=1 oflag=direct
+    losetup /dev/loop${i} member-${i}
+    DM_PARMS+=" /dev/loop${i} 0"
+  done
+
+  echo $DM_PARMS | dmsetup create raid0
+  for i in $(seq 0 ${SEQ_END}); do
+    echo "0 1 unstriped ${NUM} ${CHUNK} ${i} /dev/mapper/raid0 0" | dmsetup create set-${i}
+  done;
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dd if=/dev/urandom of=/dev/mapper/set-${i} bs=${BS} count=${COUNT} oflag=direct
+    diff /dev/mapper/set-${i} member-${i}
+  done;
+
+  for i in $(seq 0 ${SEQ_END}); do
+    dmsetup remove set-${i}
+  done
+
+  dmsetup remove raid0
+
+  for i in $(seq 0 ${SEQ_END}); do
+    losetup -d /dev/loop${i}
+    rm -f member-${i}
+  done
+
+Another example
+---------------
+
+Intel NVMe drives contain two cores on the physical device.
+Each core of the drive has segregated access to its LBA range.
+The current LBA model has a RAID 0 128k chunk on each core, resulting
+in a 256k stripe across the two cores::
+
+   Core 0:       Core 1:
+  __________    __________
+  | LBA 512|    | LBA 768|
+  | LBA 0  |    | LBA 256|
+  ----------    ----------
+
+The purpose of this unstriping is to provide better QoS in noisy
+neighbor environments. When two partitions are created on the
+aggregate drive without this unstriping, reads on one partition
+can affect writes on another partition.  This is because the partitions
+are striped across the two cores.  When we unstripe this hardware RAID 0
+and make partitions on each new exposed device the two partitions are now
+physically separated.
+
+With the dm-unstriped target we're able to segregate an fio script that
+has read and write jobs that are independent of each other.  Compared to
+when we run the test on a combined drive with partitions, we were able
+to get a 92% reduction in read latency using this device mapper target.
+
+
+Example dmsetup usage
+=====================
+
+unstriped ontop of Intel NVMe device that has 2 cores
+-----------------------------------------------------
+
+::
+
+  dmsetup create nvmset0 --table '0 512 unstriped 2 256 0 /dev/nvme0n1 0'
+  dmsetup create nvmset1 --table '0 512 unstriped 2 256 1 /dev/nvme0n1 0'
+
+There will now be two devices that expose Intel NVMe core 0 and 1
+respectively::
+
+  /dev/mapper/nvmset0
+  /dev/mapper/nvmset1
+
+unstriped ontop of striped with 4 drives using 128K chunk size
+--------------------------------------------------------------
+
+::
+
+  dmsetup create raid_disk0 --table '0 512 unstriped 4 256 0 /dev/mapper/striped 0'
+  dmsetup create raid_disk1 --table '0 512 unstriped 4 256 1 /dev/mapper/striped 0'
+  dmsetup create raid_disk2 --table '0 512 unstriped 4 256 2 /dev/mapper/striped 0'
+  dmsetup create raid_disk3 --table '0 512 unstriped 4 256 3 /dev/mapper/striped 0'
diff --git a/Documentation/admin-guide/device-mapper/verity.rst b/Documentation/admin-guide/device-mapper/verity.rst
new file mode 100644
index 000000000000..a4d1c1476d72
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/verity.rst
@@ -0,0 +1,229 @@
+=========
+dm-verity
+=========
+
+Device-Mapper's "verity" target provides transparent integrity checking of
+block devices using a cryptographic digest provided by the kernel crypto API.
+This target is read-only.
+
+Construction Parameters
+=======================
+
+::
+
+    <version> <dev> <hash_dev>
+    <data_block_size> <hash_block_size>
+    <num_data_blocks> <hash_start_block>
+    <algorithm> <digest> <salt>
+    [<#opt_params> <opt_params>]
+
+<version>
+    This is the type of the on-disk hash format.
+
+    0 is the original format used in the Chromium OS.
+      The salt is appended when hashing, digests are stored continuously and
+      the rest of the block is padded with zeroes.
+
+    1 is the current format that should be used for new devices.
+      The salt is prepended when hashing and each digest is
+      padded with zeroes to the power of two.
+
+<dev>
+    This is the device containing data, the integrity of which needs to be
+    checked.  It may be specified as a path, like /dev/sdaX, or a device number,
+    <major>:<minor>.
+
+<hash_dev>
+    This is the device that supplies the hash tree data.  It may be
+    specified similarly to the device path and may be the same device.  If the
+    same device is used, the hash_start should be outside the configured
+    dm-verity device.
+
+<data_block_size>
+    The block size on a data device in bytes.
+    Each block corresponds to one digest on the hash device.
+
+<hash_block_size>
+    The size of a hash block in bytes.
+
+<num_data_blocks>
+    The number of data blocks on the data device.  Additional blocks are
+    inaccessible.  You can place hashes to the same partition as data, in this
+    case hashes are placed after <num_data_blocks>.
+
+<hash_start_block>
+    This is the offset, in <hash_block_size>-blocks, from the start of hash_dev
+    to the root block of the hash tree.
+
+<algorithm>
+    The cryptographic hash algorithm used for this device.  This should
+    be the name of the algorithm, like "sha1".
+
+<digest>
+    The hexadecimal encoding of the cryptographic hash of the root hash block
+    and the salt.  This hash should be trusted as there is no other authenticity
+    beyond this point.
+
+<salt>
+    The hexadecimal encoding of the salt value.
+
+<#opt_params>
+    Number of optional parameters. If there are no optional parameters,
+    the optional paramaters section can be skipped or #opt_params can be zero.
+    Otherwise #opt_params is the number of following arguments.
+
+    Example of optional parameters section:
+        1 ignore_corruption
+
+ignore_corruption
+    Log corrupted blocks, but allow read operations to proceed normally.
+
+restart_on_corruption
+    Restart the system when a corrupted block is discovered. This option is
+    not compatible with ignore_corruption and requires user space support to
+    avoid restart loops.
+
+ignore_zero_blocks
+    Do not verify blocks that are expected to contain zeroes and always return
+    zeroes instead. This may be useful if the partition contains unused blocks
+    that are not guaranteed to contain zeroes.
+
+use_fec_from_device <fec_dev>
+    Use forward error correction (FEC) to recover from corruption if hash
+    verification fails. Use encoding data from the specified device. This
+    may be the same device where data and hash blocks reside, in which case
+    fec_start must be outside data and hash areas.
+
+    If the encoding data covers additional metadata, it must be accessible
+    on the hash device after the hash blocks.
+
+    Note: block sizes for data and hash devices must match. Also, if the
+    verity <dev> is encrypted the <fec_dev> should be too.
+
+fec_roots <num>
+    Number of generator roots. This equals to the number of parity bytes in
+    the encoding data. For example, in RS(M, N) encoding, the number of roots
+    is M-N.
+
+fec_blocks <num>
+    The number of encoding data blocks on the FEC device. The block size for
+    the FEC device is <data_block_size>.
+
+fec_start <offset>
+    This is the offset, in <data_block_size> blocks, from the start of the
+    FEC device to the beginning of the encoding data.
+
+check_at_most_once
+    Verify data blocks only the first time they are read from the data device,
+    rather than every time.  This reduces the overhead of dm-verity so that it
+    can be used on systems that are memory and/or CPU constrained.  However, it
+    provides a reduced level of security because only offline tampering of the
+    data device's content will be detected, not online tampering.
+
+    Hash blocks are still verified each time they are read from the hash device,
+    since verification of hash blocks is less performance critical than data
+    blocks, and a hash block will not be verified any more after all the data
+    blocks it covers have been verified anyway.
+
+Theory of operation
+===================
+
+dm-verity is meant to be set up as part of a verified boot path.  This
+may be anything ranging from a boot using tboot or trustedgrub to just
+booting from a known-good device (like a USB drive or CD).
+
+When a dm-verity device is configured, it is expected that the caller
+has been authenticated in some way (cryptographic signatures, etc).
+After instantiation, all hashes will be verified on-demand during
+disk access.  If they cannot be verified up to the root node of the
+tree, the root hash, then the I/O will fail.  This should detect
+tampering with any data on the device and the hash data.
+
+Cryptographic hashes are used to assert the integrity of the device on a
+per-block basis. This allows for a lightweight hash computation on first read
+into the page cache. Block hashes are stored linearly, aligned to the nearest
+block size.
+
+If forward error correction (FEC) support is enabled any recovery of
+corrupted data will be verified using the cryptographic hash of the
+corresponding data. This is why combining error correction with
+integrity checking is essential.
+
+Hash Tree
+---------
+
+Each node in the tree is a cryptographic hash.  If it is a leaf node, the hash
+of some data block on disk is calculated. If it is an intermediary node,
+the hash of a number of child nodes is calculated.
+
+Each entry in the tree is a collection of neighboring nodes that fit in one
+block.  The number is determined based on block_size and the size of the
+selected cryptographic digest algorithm.  The hashes are linearly-ordered in
+this entry and any unaligned trailing space is ignored but included when
+calculating the parent node.
+
+The tree looks something like:
+
+	alg = sha256, num_blocks = 32768, block_size = 4096
+
+::
+
+                                 [   root    ]
+                                /    . . .    \
+                     [entry_0]                 [entry_1]
+                    /  . . .  \                 . . .   \
+         [entry_0_0]   . . .  [entry_0_127]    . . . .  [entry_1_127]
+           / ... \             /   . . .  \             /           \
+     blk_0 ... blk_127  blk_16256   blk_16383      blk_32640 . . . blk_32767
+
+
+On-disk format
+==============
+
+The verity kernel code does not read the verity metadata on-disk header.
+It only reads the hash blocks which directly follow the header.
+It is expected that a user-space tool will verify the integrity of the
+verity header.
+
+Alternatively, the header can be omitted and the dmsetup parameters can
+be passed via the kernel command-line in a rooted chain of trust where
+the command-line is verified.
+
+Directly following the header (and with sector number padded to the next hash
+block boundary) are the hash blocks which are stored a depth at a time
+(starting from the root), sorted in order of increasing index.
+
+The full specification of kernel parameters and on-disk metadata format
+is available at the cryptsetup project's wiki page
+
+  https://gitlab.com/cryptsetup/cryptsetup/wikis/DMVerity
+
+Status
+======
+V (for Valid) is returned if every check performed so far was valid.
+If any check failed, C (for Corruption) is returned.
+
+Example
+=======
+Set up a device::
+
+  # dmsetup create vroot --readonly --table \
+    "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
+    "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
+    "1234000000000000000000000000000000000000000000000000000000000000"
+
+A command line tool veritysetup is available to compute or verify
+the hash tree or activate the kernel device. This is available from
+the cryptsetup upstream repository https://gitlab.com/cryptsetup/cryptsetup/
+(as a libcryptsetup extension).
+
+Create hash on the device::
+
+  # veritysetup format /dev/sda1 /dev/sda2
+  ...
+  Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
+
+Activate the device::
+
+  # veritysetup create vroot /dev/sda1 /dev/sda2 \
+    4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
diff --git a/Documentation/admin-guide/device-mapper/writecache.rst b/Documentation/admin-guide/device-mapper/writecache.rst
new file mode 100644
index 000000000000..d3d7690f5e8d
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/writecache.rst
@@ -0,0 +1,79 @@
+=================
+Writecache target
+=================
+
+The writecache target caches writes on persistent memory or on SSD. It
+doesn't cache reads because reads are supposed to be cached in page cache
+in normal RAM.
+
+When the device is constructed, the first sector should be zeroed or the
+first sector should contain valid superblock from previous invocation.
+
+Constructor parameters:
+
+1. type of the cache device - "p" or "s"
+
+	- p - persistent memory
+	- s - SSD
+2. the underlying device that will be cached
+3. the cache device
+4. block size (4096 is recommended; the maximum block size is the page
+   size)
+5. the number of optional parameters (the parameters with an argument
+   count as two)
+
+	start_sector n		(default: 0)
+		offset from the start of cache device in 512-byte sectors
+	high_watermark n	(default: 50)
+		start writeback when the number of used blocks reach this
+		watermark
+	low_watermark x		(default: 45)
+		stop writeback when the number of used blocks drops below
+		this watermark
+	writeback_jobs n	(default: unlimited)
+		limit the number of blocks that are in flight during
+		writeback. Setting this value reduces writeback
+		throughput, but it may improve latency of read requests
+	autocommit_blocks n	(default: 64 for pmem, 65536 for ssd)
+		when the application writes this amount of blocks without
+		issuing the FLUSH request, the blocks are automatically
+		commited
+	autocommit_time ms	(default: 1000)
+		autocommit time in milliseconds. The data is automatically
+		commited if this time passes and no FLUSH request is
+		received
+	fua			(by default on)
+		applicable only to persistent memory - use the FUA flag
+		when writing data from persistent memory back to the
+		underlying device
+	nofua
+		applicable only to persistent memory - don't use the FUA
+		flag when writing back data and send the FLUSH request
+		afterwards
+
+		- some underlying devices perform better with fua, some
+		  with nofua. The user should test it
+
+Status:
+1. error indicator - 0 if there was no error, otherwise error number
+2. the number of blocks
+3. the number of free blocks
+4. the number of blocks under writeback
+
+Messages:
+	flush
+		flush the cache device. The message returns successfully
+		if the cache device was flushed without an error
+	flush_on_suspend
+		flush the cache device on next suspend. Use this message
+		when you are going to remove the cache device. The proper
+		sequence for removing the cache device is:
+
+		1. send the "flush_on_suspend" message
+		2. load an inactive table with a linear target that maps
+		   to the underlying device
+		3. suspend the device
+		4. ask for status and verify that there are no errors
+		5. resume the device, so that it will use the linear
+		   target
+		6. the cache device is now inactive and it can be deleted
diff --git a/Documentation/admin-guide/device-mapper/zero.rst b/Documentation/admin-guide/device-mapper/zero.rst
new file mode 100644
index 000000000000..11fb5cf4597c
--- /dev/null
+++ b/Documentation/admin-guide/device-mapper/zero.rst
@@ -0,0 +1,37 @@
+=======
+dm-zero
+=======
+
+Device-Mapper's "zero" target provides a block-device that always returns
+zero'd data on reads and silently drops writes. This is similar behavior to
+/dev/zero, but as a block-device instead of a character-device.
+
+Dm-zero has no target-specific parameters.
+
+One very interesting use of dm-zero is for creating "sparse" devices in
+conjunction with dm-snapshot. A sparse device reports a device-size larger
+than the amount of actual storage space available for that device. A user can
+write data anywhere within the sparse device and read it back like a normal
+device. Reads to previously unwritten areas will return a zero'd buffer. When
+enough data has been written to fill up the actual storage space, the sparse
+device is deactivated. This can be very useful for testing device and
+filesystem limitations.
+
+To create a sparse device, start by creating a dm-zero device that's the
+desired size of the sparse device. For this example, we'll assume a 10TB
+sparse device::
+
+  TEN_TERABYTES=`expr 10 \* 1024 \* 1024 \* 1024 \* 2`   # 10 TB in sectors
+  echo "0 $TEN_TERABYTES zero" | dmsetup create zero1
+
+Then create a snapshot of the zero device, using any available block-device as
+the COW device. The size of the COW device will determine the amount of real
+space available to the sparse device. For this example, we'll assume /dev/sdb1
+is an available 10GB partition::
+
+  echo "0 $TEN_TERABYTES snapshot /dev/mapper/zero1 /dev/sdb1 p 128" | \
+     dmsetup create sparse1
+
+This will create a 10TB sparse device called /dev/mapper/sparse1 that has
+10GB of actual storage space available. If more than 10GB of data is written
+to this device, it will start returning I/O errors.