summaryrefslogtreecommitdiff
path: root/Documentation/DocBook/libata.tmpl
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-17 02:20:36 +0400
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/DocBook/libata.tmpl
downloadlinux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'Documentation/DocBook/libata.tmpl')
-rw-r--r--Documentation/DocBook/libata.tmpl282
1 files changed, 282 insertions, 0 deletions
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
new file mode 100644
index 000000000000..cf2fce7707da
--- /dev/null
+++ b/Documentation/DocBook/libata.tmpl
@@ -0,0 +1,282 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="libataDevGuide">
+ <bookinfo>
+ <title>libATA Developer's Guide</title>
+
+ <authorgroup>
+ <author>
+ <firstname>Jeff</firstname>
+ <surname>Garzik</surname>
+ </author>
+ </authorgroup>
+
+ <copyright>
+ <year>2003</year>
+ <holder>Jeff Garzik</holder>
+ </copyright>
+
+ <legalnotice>
+ <para>
+ The contents of this file are subject to the Open
+ Software License version 1.1 that can be found at
+ <ulink url="http://www.opensource.org/licenses/osl-1.1.txt">http://www.opensource.org/licenses/osl-1.1.txt</ulink> and is included herein
+ by reference.
+ </para>
+
+ <para>
+ Alternatively, the contents of this file may be used under the terms
+ of the GNU General Public License version 2 (the "GPL") as distributed
+ in the kernel source COPYING file, in which case the provisions of
+ the GPL are applicable instead of the above. If you wish to allow
+ the use of your version of this file only under the terms of the
+ GPL and not to allow others to use your version of this file under
+ the OSL, indicate your decision by deleting the provisions above and
+ replace them with the notice and other provisions required by the GPL.
+ If you do not delete the provisions above, a recipient may use your
+ version of this file under either the OSL or the GPL.
+ </para>
+
+ </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+ <chapter id="libataThanks">
+ <title>Thanks</title>
+ <para>
+ The bulk of the ATA knowledge comes thanks to long conversations with
+ Andre Hedrick (www.linux-ide.org).
+ </para>
+ <para>
+ Thanks to Alan Cox for pointing out similarities
+ between SATA and SCSI, and in general for motivation to hack on
+ libata.
+ </para>
+ <para>
+ libata's device detection
+ method, ata_pio_devchk, and in general all the early probing was
+ based on extensive study of Hale Landis's probe/reset code in his
+ ATADRVR driver (www.ata-atapi.com).
+ </para>
+ </chapter>
+
+ <chapter id="libataDriverApi">
+ <title>libata Driver API</title>
+ <sect1>
+ <title>struct ata_port_operations</title>
+
+ <programlisting>
+void (*port_disable) (struct ata_port *);
+ </programlisting>
+
+ <para>
+ Called from ata_bus_probe() and ata_bus_reset() error paths,
+ as well as when unregistering from the SCSI module (rmmod, hot
+ unplug).
+ </para>
+
+ <programlisting>
+void (*dev_config) (struct ata_port *, struct ata_device *);
+ </programlisting>
+
+ <para>
+ Called after IDENTIFY [PACKET] DEVICE is issued to each device
+ found. Typically used to apply device-specific fixups prior to
+ issue of SET FEATURES - XFER MODE, and prior to operation.
+ </para>
+
+ <programlisting>
+void (*set_piomode) (struct ata_port *, struct ata_device *);
+void (*set_dmamode) (struct ata_port *, struct ata_device *);
+void (*post_set_mode) (struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ Hooks called prior to the issue of SET FEATURES - XFER MODE
+ command. dev->pio_mode is guaranteed to be valid when
+ ->set_piomode() is called, and dev->dma_mode is guaranteed to be
+ valid when ->set_dmamode() is called. ->post_set_mode() is
+ called unconditionally, after the SET FEATURES - XFER MODE
+ command completes successfully.
+ </para>
+
+ <para>
+ ->set_piomode() is always called (if present), but
+ ->set_dma_mode() is only called if DMA is possible.
+ </para>
+
+ <programlisting>
+void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+ </programlisting>
+
+ <para>
+ ->tf_load() is called to load the given taskfile into hardware
+ registers / DMA buffers. ->tf_read() is called to read the
+ hardware registers / DMA buffers, to obtain the current set of
+ taskfile register values.
+ </para>
+
+ <programlisting>
+void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+ </programlisting>
+
+ <para>
+ causes an ATA command, previously loaded with
+ ->tf_load(), to be initiated in hardware.
+ </para>
+
+ <programlisting>
+u8 (*check_status)(struct ata_port *ap);
+void (*dev_select)(struct ata_port *ap, unsigned int device);
+ </programlisting>
+
+ <para>
+ Reads the Status ATA shadow register from hardware. On some
+ hardware, this has the side effect of clearing the interrupt
+ condition.
+ </para>
+
+ <programlisting>
+void (*dev_select)(struct ata_port *ap, unsigned int device);
+ </programlisting>
+
+ <para>
+ Issues the low-level hardware command(s) that causes one of N
+ hardware devices to be considered 'selected' (active and
+ available for use) on the ATA bus.
+ </para>
+
+ <programlisting>
+void (*phy_reset) (struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ The very first step in the probe phase. Actions vary depending
+ on the bus type, typically. After waking up the device and probing
+ for device presence (PATA and SATA), typically a soft reset
+ (SRST) will be performed. Drivers typically use the helper
+ functions ata_bus_reset() or sata_phy_reset() for this hook.
+ </para>
+
+ <programlisting>
+void (*bmdma_setup) (struct ata_queued_cmd *qc);
+void (*bmdma_start) (struct ata_queued_cmd *qc);
+ </programlisting>
+
+ <para>
+ When setting up an IDE BMDMA transaction, these hooks arm
+ (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
+ engine.
+ </para>
+
+ <programlisting>
+void (*qc_prep) (struct ata_queued_cmd *qc);
+int (*qc_issue) (struct ata_queued_cmd *qc);
+ </programlisting>
+
+ <para>
+ Higher-level hooks, these two hooks can potentially supercede
+ several of the above taskfile/DMA engine hooks. ->qc_prep is
+ called after the buffers have been DMA-mapped, and is typically
+ used to populate the hardware's DMA scatter-gather table.
+ Most drivers use the standard ata_qc_prep() helper function, but
+ more advanced drivers roll their own.
+ </para>
+ <para>
+ ->qc_issue is used to make a command active, once the hardware
+ and S/G tables have been prepared. IDE BMDMA drivers use the
+ helper function ata_qc_issue_prot() for taskfile protocol-based
+ dispatch. More advanced drivers roll their own ->qc_issue
+ implementation, using this as the "issue new ATA command to
+ hardware" hook.
+ </para>
+
+ <programlisting>
+void (*eng_timeout) (struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ This is a high level error handling function, called from the
+ error handling thread, when a command times out.
+ </para>
+
+ <programlisting>
+irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
+void (*irq_clear) (struct ata_port *);
+ </programlisting>
+
+ <para>
+ ->irq_handler is the interrupt handling routine registered with
+ the system, by libata. ->irq_clear is called during probe just
+ before the interrupt handler is registered, to be sure hardware
+ is quiet.
+ </para>
+
+ <programlisting>
+u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
+void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
+ u32 val);
+ </programlisting>
+
+ <para>
+ Read and write standard SATA phy registers. Currently only used
+ if ->phy_reset hook called the sata_phy_reset() helper function.
+ </para>
+
+ <programlisting>
+int (*port_start) (struct ata_port *ap);
+void (*port_stop) (struct ata_port *ap);
+void (*host_stop) (struct ata_host_set *host_set);
+ </programlisting>
+
+ <para>
+ ->port_start() is called just after the data structures for each
+ port are initialized. Typically this is used to alloc per-port
+ DMA buffers / tables / rings, enable DMA engines, and similar
+ tasks.
+ </para>
+ <para>
+ ->host_stop() is called when the rmmod or hot unplug process
+ begins. The hook must stop all hardware interrupts, DMA
+ engines, etc.
+ </para>
+ <para>
+ ->port_stop() is called after ->host_stop(). It's sole function
+ is to release DMA/memory resources, now that they are no longer
+ actively being used.
+ </para>
+
+ </sect1>
+ </chapter>
+
+ <chapter id="libataExt">
+ <title>libata Library</title>
+!Edrivers/scsi/libata-core.c
+ </chapter>
+
+ <chapter id="libataInt">
+ <title>libata Core Internals</title>
+!Idrivers/scsi/libata-core.c
+ </chapter>
+
+ <chapter id="libataScsiInt">
+ <title>libata SCSI translation/emulation</title>
+!Edrivers/scsi/libata-scsi.c
+!Idrivers/scsi/libata-scsi.c
+ </chapter>
+
+ <chapter id="PiixInt">
+ <title>ata_piix Internals</title>
+!Idrivers/scsi/ata_piix.c
+ </chapter>
+
+ <chapter id="SILInt">
+ <title>sata_sil Internals</title>
+!Idrivers/scsi/sata_sil.c
+ </chapter>
+
+</book>