Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...

1 files changed, 240 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-usb_power_delivery b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
new file mode 100644
index 000000000000..ce2b1b563cb3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-usb_power_delivery
@@ -0,0 +1,240 @@
+What:		/sys/class/usb_power_delivery
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Directory for USB Power Delivery devices.
+
+What:		/sys/class/usb_power_delivery/.../revision
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		File showing the USB Power Delivery Specification Revision used
+		in communication.
+
+What:		/sys/class/usb_power_delivery/.../version
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This is an optional attribute file showing the version of the
+		specific revision of the USB Power Delivery Specification. In
+		most cases the specification version is not known and the file
+		is not available.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The source capabilities message "Source_Capabilities" contains a
+		set of Power Data Objects (PDO), each representing a type of
+		power supply. The order of the PDO objects is defined in the USB
+		Power Delivery Specification. Each PDO - power supply - will
+		have its own device, and the PDO device name will start with the
+		object position number as the first character followed by the
+		power supply type name (":" as delimiter).
+
+			/sys/class/usb_power_delivery/.../source_capabilities/<position>:<type>
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The sink capability message "Sink_Capabilities" contains a set
+		of Power Data Objects (PDO) just like with source capabilities,
+		but instead of describing the power capabilities, these objects
+		describe the power requirements.
+
+		The order of the objects in the sink capability message is the
+		same as with the source capabilities message.
+
+Fixed Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Devices containing the attributes (the bit fields) defined for
+		Fixed Supplies.
+
+		The device "1:fixed_supply" is special. USB Power Delivery
+		Specification dictates that the first PDO (at object position
+		1), and the only mandatory PDO, is always the vSafe5V Fixed
+		Supply Object. vSafe5V Object has additional fields defined for
+		it that the other Fixed Supply Objects do not have and that are
+		related to the USB capabilities rather than power capabilities.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file contains boolean value that tells does the device
+		support both source and sink power roles.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_suspend_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the USB Suspend Supported bit in
+		vSafe5V Fixed Supply Object. If the bit is set then the device
+		will follow the USB 2.0 and USB 3.2 rules for suspend and
+		resume.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unconstrained_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Unconstrained Power bit in
+		vSafe5V Fixed Supply Object. The bit is set when an external
+		source of power, powerful enough to power the entire system on
+		its own, is available for the device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/usb_communication_capable
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the USB Communication Capable bit in
+		vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/dual_role_data
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Dual-Role Data bit in vSafe5V
+		Fixed Supply Object. Dual role data means ability act as both
+		USB host and USB device.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/1:fixed_supply/unchunked_extended_messages_supported
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file shows the value of the Unchunked Extended Messages
+		Supported bit in vSafe5V Fixed Supply Object.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:fixed_supply/voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The voltage the supply supports in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:fixed_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum current of the fixed source supply in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Operational current of the sink in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:fixed_supply/fast_role_swap_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		This file contains the value of the "Fast Role Swap USB Type-C
+		Current" field that tells the current level the sink requires
+		after a Fast Role Swap.
+		0 - Fast Swap not supported"
+		1 - Default USB Power"
+		2 - 1.5A@5V"
+		3 - 3.0A@5V"
+
+Variable Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Variable Power Supply PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:variable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:variable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The maximum current in milliamperes that the source can supply
+		at the given Voltage range.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:variable_supply/operational_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The operational current in milliamperes that the sink requires
+		at the given Voltage range.
+
+Battery Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Battery PDO.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:battery/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:battery/maximum_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum allowable Power in milliwatts.
+
+What:		/sys/class/usb_power_delivery/.../sink-capabilities/<position>:battery/operational_power
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The operational power that the sink requires at the given
+		voltage range.
+
+Standard Power Range (SPR) Programmable Power Supplies
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Programmable Power Supply (PPS) Augmented PDO (APDO).
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/minimum_voltage
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Minimum Voltage in millivolts.
+
+What:		/sys/class/usb_power_delivery/.../<capability>/<position>:programmable_supply/maximum_current
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		Maximum Current in milliamperes.
+
+What:		/sys/class/usb_power_delivery/.../source-capabilities/<position>:programmable_supply/pps_power_limited
+Date:		May 2022
+Contact:	Heikki Krogerus <heikki.krogerus@linux.intel.com>
+Description:
+		The PPS Power Limited bit indicates whether or not the source
+		supply will exceed the rated output power if requested.