Merge tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt patches for 5.14-rc1.

  Nothing major here just lots of little changes for new hardware and
  features. Highlights are:

   - more USB 4 support added to the thunderbolt core

   - build warning fixes all over the place

   - usb-serial driver updates and new device support

   - mtu3 driver updates

   - gadget driver updates

   - dwc3 driver updates

   - dwc2 driver updates

   - isp1760 host driver updates

   - musb driver updates

   - lots of other tiny things.

  Full details are in the shortlog.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
  phy: qcom-qusb2: Add configuration for SM4250 and SM6115
  dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
  dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
  USB: cdc-acm: blacklist Heimann USB Appset device
  usb: xhci-mtk: allow multiple Start-Split in a microframe
  usb: ftdi-elan: remove redundant continue statement in a while-loop
  usb: class: cdc-wdm: return the correct errno code
  xhci: remove redundant continue statement
  usb: dwc3: Fix debugfs creation flow
  usb: gadget: hid: fix error return code in hid_bind()
  usb: gadget: eem: fix echo command packet response issue
  usb: gadget: f_hid: fix endianness issue with descriptors
  Revert "USB: misc: Add onboard_usb_hub driver"
  Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
  Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
  Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
  xhci: solve a double free problem while doing s4
  xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
  xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
  xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
  ...

1 files changed, 59 insertions, 23 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-thunderbolt b/Documentation/ABI/testing/sysfs-bus-thunderbolt
index c41c68f64693..95c21d6c9a84 100644
--- a/Documentation/ABI/testing/sysfs-bus-thunderbolt
+++ b/Documentation/ABI/testing/sysfs-bus-thunderbolt
@@ -1,4 +1,4 @@
-What: /sys/bus/thunderbolt/devices/.../domainX/boot_acl
+What:		/sys/bus/thunderbolt/devices/.../domainX/boot_acl
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
@@ -21,7 +21,7 @@ Description:	Holds a comma separated list of device unique_ids that
 		If a device is authorized automatically during boot its
 		boot attribute is set to 1.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/deauthorization
+What:		/sys/bus/thunderbolt/devices/.../domainX/deauthorization
 Date:		May 2021
 KernelVersion:	5.12
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
@@ -30,7 +30,7 @@ Description:	This attribute tells whether the system supports
 		de-authorize PCIe tunnel by writing 0 to authorized
 		attribute under each device.
 
-What: /sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
+What:		/sys/bus/thunderbolt/devices/.../domainX/iommu_dma_protection
 Date:		Mar 2019
 KernelVersion:	4.21
 Contact:	thunderbolt-software@lists.01.org
@@ -39,7 +39,7 @@ Description:	This attribute tells whether the system uses IOMMU
 		it is not (DMA protection is solely based on Thunderbolt
 		security levels).
 
-What: /sys/bus/thunderbolt/devices/.../domainX/security
+What:		/sys/bus/thunderbolt/devices/.../domainX/security
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -61,7 +61,7 @@ Description:	This attribute holds current Thunderbolt security level
 			 the BIOS.
 		=======  ==================================================
 
-What: /sys/bus/thunderbolt/devices/.../authorized
+What:		/sys/bus/thunderbolt/devices/.../authorized
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -95,14 +95,14 @@ Description:	This attribute is used to authorize Thunderbolt devices
 		    EKEYREJECTED if the challenge response did not match.
 		==  ========================================================
 
-What: /sys/bus/thunderbolt/devices/.../boot
+What:		/sys/bus/thunderbolt/devices/.../boot
 Date:		Jun 2018
 KernelVersion:	4.17
 Contact:	thunderbolt-software@lists.01.org
 Description:	This attribute contains 1 if Thunderbolt device was already
 		authorized on boot and 0 otherwise.
 
-What: /sys/bus/thunderbolt/devices/.../generation
+What:		/sys/bus/thunderbolt/devices/.../generation
 Date:		Jan 2020
 KernelVersion:	5.5
 Contact:	Christian Kellner <christian@kellner.me>
@@ -110,7 +110,7 @@ Description:	This attribute contains the generation of the Thunderbolt
 		controller associated with the device. It will contain 4
 		for USB4.
 
-What: /sys/bus/thunderbolt/devices/.../key
+What:		/sys/bus/thunderbolt/devices/.../key
 Date:		Sep 2017
 KernelVersion:	4.13
 Contact:	thunderbolt-software@lists.01.org
@@ -213,12 +213,15 @@ Description:	When new NVM image is written to the non-active NVM
 		restarted with the new NVM firmware. If the image
 		verification fails an error code is returned instead.
 
-		This file will accept writing values "1" or "2"
+		This file will accept writing values "1", "2" or "3".
 
 		- Writing "1" will flush the image to the storage
 		  area and authenticate the image in one action.
 		- Writing "2" will run some basic validation on the image
 		  and flush it to the storage area.
+		- Writing "3" will authenticate the image that is
+		  currently written in the storage area. This is only
+		  supported with USB4 devices and retimers.
 
 		When read holds status of the last authentication
 		operation if an error occurred during the process. This
@@ -226,6 +229,20 @@ Description:	When new NVM image is written to the non-active NVM
 		based mailbox before the device is power cycled. Writing
 		0 here clears the status.
 
+What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
+Date:		Oct 2020
+KernelVersion:	v5.9
+Contact:	Mario Limonciello <mario.limonciello@dell.com>
+Description:	For supported devices, automatically authenticate the new Thunderbolt
+		image when the device is disconnected from the host system.
+
+		This file will accept writing values "1" or "2"
+
+		- Writing "1" will flush the image to the storage
+		  area and prepare the device for authentication on disconnect.
+		- Writing "2" will run some basic validation on the image
+		  and flush it to the storage area.
+
 What:		/sys/bus/thunderbolt/devices/<xdomain>.<service>/key
 Date:		Jan 2018
 KernelVersion:	4.15
@@ -276,6 +293,39 @@ Contact:	thunderbolt-software@lists.01.org
 Description:	This contains XDomain service specific settings as
 		bitmask. Format: %x
 
+What:		/sys/bus/thunderbolt/devices/usb4_portX/link
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
+Description:	Returns the current link mode. Possible values are
+		"usb4", "tbt" and "none".
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/offline
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	Writing 1 to this attribute puts the USB4 port into
+		offline mode. Only allowed when there is nothing
+		connected to the port (link attribute returns "none").
+		Once the port is in offline mode it does not receive any
+		hotplug events. This is used to update NVM firmware of
+		on-board retimers. Writing 0 puts the port back to
+		online mode.
+
+		This attribute is only visible if the platform supports
+		powering on retimers when there is no cable connected.
+
+What:		/sys/bus/thunderbolt/devices/usb4_portX/rescan
+Date:		Sep 2021
+KernelVersion:	v5.14
+Contact:	Rajmohan Mani <rajmohan.mani@intel.com>
+Description:	When the USB4 port is in offline mode writing 1 to this
+		attribute forces rescan of the sideband for on-board
+		retimers. Each retimer appear under the USB4 port as if
+		the USB4 link was up. These retimers act in the same way
+		as if the cable was connected so upgrading their NVM
+		firmware can be done the usual way.
+
 What:		/sys/bus/thunderbolt/devices/<device>:<port>.<index>/device
 Date:		Oct 2020
 KernelVersion:	v5.9
@@ -308,17 +358,3 @@ Date:		Oct 2020
 KernelVersion:	v5.9
 Contact:	Mika Westerberg <mika.westerberg@linux.intel.com>
 Description:	Retimer vendor identifier read from the hardware.
-
-What:		/sys/bus/thunderbolt/devices/.../nvm_authenticate_on_disconnect
-Date:		Oct 2020
-KernelVersion:	v5.9
-Contact:	Mario Limonciello <mario.limonciello@dell.com>
-Description:	For supported devices, automatically authenticate the new Thunderbolt
-		image when the device is disconnected from the host system.
-
-		This file will accept writing values "1" or "2"
-
-		- Writing "1" will flush the image to the storage
-		  area and prepare the device for authentication on disconnect.
-		- Writing "2" will run some basic validation on the image
-		  and flush it to the storage area.