diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-09-03 00:22:56 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-09-03 00:22:56 +0300 |
| commit | c793011242d182e5f12800c12dbaf37af80be735 (patch) | |
| tree | b358cda4e7b2fcef409032117850f56f6f1eb374 | |
| parent | 75d6e7d9ced83e937757e278c3ce1ccd6606a96a (diff) | |
| parent | 04853352952b7dd17f355ed54bd81305b341af55 (diff) | |
| download | linux-c793011242d182e5f12800c12dbaf37af80be735.tar.xz | |
Merge tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.15 kernel cycle, no
core changes at all this time, just driver work!
New drivers:
- New subdriver for Intel Keem Bay (an ARM-based SoC)
- New subdriver for Qualcomm MDM9607 and SM6115
- New subdriver for ST Microelectronics STM32MP135
- New subdriver for Freescale i.MX8ULP ("Ultra Low Power")
- New subdriver for Ingenic X2100
- Support for Qualcomm PMC8180, PMC8180C, SA8155p-adp PMIC GPIO
- Support Samsung Exynos850
- Support Renesas RZ/G2L
Enhancements:
- A major refactoring of the Rockchip driver, breaking part of it out
to a separate GPIO driver in drivers/gpio
- Pin bias support on Renesas r8a77995
- Add SCI pins support to Ingenic JZ4755 and JZ4760
- Mediatek device tree bindings converted to YAML"
* tag 'pinctrl-v5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (53 commits)
pinctrl: renesas: Add RZ/G2L pin and gpio controller driver
pinctrl: samsung: Add Exynos850 SoC specific data
dt-bindings: pinctrl: samsung: Add Exynos850 doc
MAINTAINERS: Add maintainers for amd-pinctrl driver
pinctrl: Add Intel Keem Bay pinctrl driver
dt-bindings: pinctrl: Add bindings for Intel Keembay pinctrl driver
pinctrl: zynqmp: Drop pinctrl_unregister for devm_ registered device
dt-bindings: pinctrl: qcom-pmic-gpio: Remove the interrupts property
dt-bindings: pinctrl: qcom-pmic-gpio: Convert qcom pmic gpio bindings to YAML
dt-bindings: pinctrl: mt8195: Use real world values for drive-strength arguments
dt-bindings: mediatek: convert pinctrl to yaml
arm: dts: mt8183: Move pinfunc to include/dt-bindings/pinctrl
arm: dts: mt8135: Move pinfunc to include/dt-bindings/pinctrl
pinctrl: ingenic: Add .max_register in regmap_config
pinctrl: ingenic: Fix bias config for X2000(E)
pinctrl: ingenic: Fix incorrect pull up/down info
pinctrl: Ingenic: Add pinctrl driver for X2100.
dt-bindings: pinctrl: Add bindings for Ingenic X2100.
pinctrl: Ingenic: Add SSI pins support for JZ4755 and JZ4760.
pinctrl: Ingenic: Improve the code.
...
67 files changed, 10134 insertions, 1440 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml new file mode 100644 index 000000000000..86622c4f374b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8ulp-pinctrl.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8ulp-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale IMX8ULP IOMUX Controller + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: + Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory + for common binding part and usage. + +properties: + compatible: + const: fsl,imx8ulp-iomuxc1 + + reg: + maxItems: 1 + +# Client device subnode's properties +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + fsl,pins: + description: + each entry consists of 5 integers and represents the mux and config + setting for one pin. The first 4 integers <mux_config_reg input_reg + mux_mode input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. Please + refer to i.MX8ULP Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_config_reg" indicates the offset of mux register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_mode" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + # Pinmux controller node + - | + iomuxc: pinctrl@298c0000 { + compatible = "fsl,imx8ulp-iomuxc1"; + reg = <0x298c0000 0x10000>; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = + <0x0138 0x08F0 0x4 0x3 0x3>, + <0x013C 0x08EC 0x4 0x3 0x3>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index a4846d78111c..a12d0ceb7637 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -19,10 +19,10 @@ description: > pin within that GPIO port. For example PA0 is the first pin in GPIO port A, and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B, the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128 - pins. The X2000 contains 5 GPIO ports, PA to PE, for a total of 160 pins. - The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains 6 GPIO - ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO ports, - PA to PG, for a total of 224 pins. + pins. The X2000 and the X2100 contains 5 GPIO ports, PA to PE, for a total of + 160 pins. The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains + 6 GPIO ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO + ports, PA to PG, for a total of 224 pins. maintainers: - Paul Cercueil <paul@crapouillou.net> @@ -47,6 +47,7 @@ properties: - ingenic,x1500-pinctrl - ingenic,x1830-pinctrl - ingenic,x2000-pinctrl + - ingenic,x2100-pinctrl - items: - const: ingenic,jz4760b-pinctrl - const: ingenic,jz4760-pinctrl @@ -85,6 +86,7 @@ patternProperties: - ingenic,x1500-gpio - ingenic,x1830-gpio - ingenic,x2000-gpio + - ingenic,x2100-gpio reg: items: diff --git a/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml new file mode 100644 index 000000000000..5e99d79499b4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/intel,pinctrl-keembay.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay pin controller Device Tree Bindings + +maintainers: + - Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> + +description: | + Intel Keem Bay SoC integrates a pin controller which enables control + of pin directions, input/output values and configuration + for a total of 80 pins. + +properties: + compatible: + const: intel,keembay-pinctrl + + reg: + maxItems: 2 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + ngpios: + description: The number of GPIOs exposed. + const: 80 + + interrupts: + description: + Specifies the interrupt lines to be used by the controller. + Each interrupt line is shared by upto 4 GPIO lines. + maxItems: 8 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + +patternProperties: + '^gpio@[0-9a-f]*$': + type: object + + description: + Child nodes can be specified to contain pin configuration information, + which can then be utilized by pinctrl client devices. + The following properties are supported. + + properties: + pins: + description: | + The name(s) of the pins to be configured in the child node. + Supported pin names are "GPIO0" up to "GPIO79". + + bias-disable: true + + bias-pull-down: true + + bias-pull-up: true + + drive-strength: + description: IO pads drive strength in milli Ampere. + enum: [2, 4, 8, 12] + + bias-bus-hold: + type: boolean + + input-schmitt-enable: + type: boolean + + slew-rate: + description: GPIO slew rate control. + 0 - Fast(~100MHz) + 1 - Slow(~50MHz) + enum: [0, 1] + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - ngpios + - '#gpio-cells' + - interrupts + - interrupt-controller + - '#interrupt-cells' + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + // Example 1 + gpio@0 { + compatible = "intel,keembay-pinctrl"; + reg = <0x600b0000 0x88>, + <0x600b0190 0x1ac>; + gpio-controller; + ngpios = <0x50>; + #gpio-cells = <0x2>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + // Example 2 + gpio@1 { + compatible = "intel,keembay-pinctrl"; + reg = <0x600c0000 0x88>, + <0x600c0190 0x1ac>; + gpio-controller; + ngpios = <0x50>; + #gpio-cells = <0x2>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index 38dc56a57760..ecec514b3155 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -43,19 +43,19 @@ group emmc_nb group pwm0 - pin 11 (GPIO1-11) - - functions pwm, gpio + - functions pwm, led, gpio group pwm1 - pin 12 - - functions pwm, gpio + - functions pwm, led, gpio group pwm2 - pin 13 - - functions pwm, gpio + - functions pwm, led, gpio group pwm3 - pin 14 - - functions pwm, gpio + - functions pwm, led, gpio group pmic1 - pin 7 diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml new file mode 100644 index 000000000000..f8e6e138dc13 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT65xx Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: |+ + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt2701-pinctrl + - mediatek,mt2712-pinctrl + - mediatek,mt6397-pinctrl + - mediatek,mt7623-pinctrl + - mediatek,mt8127-pinctrl + - mediatek,mt8135-pinctrl + - mediatek,mt8167-pinctrl + - mediatek,mt8173-pinctrl + - mediatek,mt8516-pinctrl + + reg: + maxItems: 1 + + pins-are-numbered: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Specify the subnodes are using numbered pinmux to specify pins. + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + mediatek,pctl-regmap: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + description: | + Should be phandles of the syscfg node. + + interrupt-controller: true + + interrupts: + minItems: 1 + maxItems: 3 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - pins-are-numbered + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + 'pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in <soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: + description: | + Besides generic pinconfig options, it can be used as the pull up + settings for 2 pull resistors, R0 and R1. User can configure those + special pins. Some macros have been defined for this usage, such + as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for + valid arguments. + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + description: | + Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, + etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments. + + required: + - pinmux + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt8135-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + syscfg_pctl_a: syscfg-pctl-a@10005000 { + compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; + reg = <0 0x10005000 0 0x1000>; + }; + + syscfg_pctl_b: syscfg-pctl-b@1020c020 { + compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; + reg = <0 0x1020C020 0 0x1000>; + }; + + pinctrl@1c20800 { + compatible = "mediatek,mt8135-pinctrl"; + reg = <0 0x1000B000 0 0x1000>; + mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; + pins-are-numbered; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + + i2c0_pins_a: i2c0-0 { + pins1 { + pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, + <MT8135_PIN_101_SCL0__FUNC_SCL0>; + bias-disable; + }; + }; + + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, + <MT8135_PIN_196_SCL1__FUNC_SCL1>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + i2c2_pins_a: i2c2-0 { + pins1 { + pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; + bias-pull-down; + }; + + pins2 { + pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>; + bias-pull-up; + }; + }; + + i2c3_pins_a: i2c3-0 { + pins1 { + pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, + <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins2 { + pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>, + <MT8135_PIN_36_SDA3__FUNC_SDA3>; + output-low; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins3 { + pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>, + <MT8135_PIN_60_JTDI__FUNC_JTDI>; + drive-strength = <32>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml new file mode 100644 index 000000000000..76a6df75ed9c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml @@ -0,0 +1,173 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT6797 Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: |+ + The MediaTek's MT6797 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt6797-pinctrl + + reg: + minItems: 5 + maxItems: 5 + + reg-names: + items: + - const: gpio + - const: iocfgl + - const: iocfgb + - const: iocfgr + - const: iocfgt + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - reg-names + - gpio-controller + - "#gpio-cells" + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + 'pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in <soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,tdsel: + description: | + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: | + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pinmux + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt6797-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt6797-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x10002000 0 0x400>, + <0 0x10002400 0 0x400>, + <0 0x10002800 0 0x400>, + <0 0x10002C00 0 0x400>; + reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt"; + gpio-controller; + #gpio-cells = <2>; + + uart_pins_a: uart-0 { + pins1 { + pinmux = <MT6797_GPIO232__FUNC_URXD1>, + <MT6797_GPIO233__FUNC_UTXD1>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml new file mode 100644 index 000000000000..0feecd376c69 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -0,0 +1,373 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt7622-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT7622 Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: |+ + The MediaTek's MT7622 Pin controller is used to control SoC pins. + +properties: + compatible: + enum: + - mediatek,mt7622-pinctrl + - mediatek,mt7629-pinctrl + + reg: + maxItems: 1 + + reg-names: + items: + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +if: + required: + - interrupt-controller +then: + required: + - reg-names + - interrupts + - "#interrupt-cells" + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + 'mux': + type: object + additionalProperties: false + description: | + pinmux configuration nodes. + $ref: "/schemas/pinctrl/pinmux-node.yaml" + properties: + function: + description: | + A string containing the name of the function to mux to the group. + enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd, + spi, tdm, uart, watchdog, wifi] + + groups: + description: | + An array of strings. Each string contains the name of a group. + + drive-strength: + enum: [4, 8, 12, 16] + + required: + - groups + - function + + allOf: + - if: + properties: + function: + const: emmc + then: + properties: + groups: + enum: [emmc, emmc_rst] + - if: + properties: + function: + const: eth + then: + properties: + groups: + enum: [esw, esw_p0_p1, esw_p2_p3_p4, rgmii_via_esw, + rgmii_via_gmac1, rgmii_via_gmac2, mdc_mdio] + - if: + properties: + function: + const: i2c + then: + properties: + groups: + enum: [i2c0, i2c_0, i2c_1, i2c1_0, i2c1_1, i2c1_2, i2c2_0, + i2c2_1, i2c2_2] + - if: + properties: + function: + const: i2s + then: + properties: + groups: + enum: [i2s_in_mclk_bclk_ws, i2s1_in_data, i2s2_in_data, + i2s3_in_data, i2s4_in_data, i2s_out_mclk_bclk_ws, + i2s1_out_data, i2s2_out_data, i2s3_out_data, + i2s4_out_data] + - if: + properties: + function: + const: ir + then: + properties: + groups: + enum: [ir_0_tx, ir_1_tx, ir_2_tx, ir_0_rx, ir_1_rx, ir_2_rx] + - if: + properties: + function: + const: led + then: + properties: + groups: + enum: [ephy_leds, ephy0_led, ephy1_led, ephy2_led, ephy3_led, + ephy4_led, wled, wf2g_led, wf5g_led] + - if: + properties: + function: + const: flash + then: + properties: + groups: + enum: [par_nand, snfi, spi_nor] + - if: + properties: + function: + const: pcie + then: + properties: + groups: + enum: [pcie0_0_waken, pcie0_1_waken, pcie1_0_waken, + pcie0_0_clkreq, pcie0_1_clkreq, pcie1_0_clkreq, + pcie0_pad_perst, pcie1_pad_perst, pcie_pereset, + pcie_wake, pcie_clkreq] + - if: + properties: + function: + const: pmic + then: + properties: + groups: + enum: [pmic_bus] + - if: + properties: + function: + const: pwm + then: + properties: + groups: + enum: [pwm_ch1_0, pwm_ch1_1, pwm_ch1_2, pwm_ch2_0, pwm_ch2_1, + pwm_ch2_2, pwm_ch3_0, pwm_ch3_1, pwm_ch3_2, pwm_ch4_0, + pwm_ch4_1, pwm_ch4_2, pwm_ch4_3, pwm_ch5_0, pwm_ch5_1, + pwm_ch5_2, pwm_ch6_0, pwm_ch6_1, pwm_ch6_2, pwm_ch6_3, + pwm_ch7_0, pwm_0, pwm_1] + - if: + properties: + function: + const: sd + then: + properties: + groups: + enum: [sd_0, sd_1] + - if: + properties: + function: + const: spi + then: + properties: + groups: + enum: [spic0_0, spic0_1, spic1_0, spic1_1, spic2_0_wp_hold, + spic2_0, spi_0, spi_1, spi_wp, spi_hold] + - if: + properties: + function: + const: tdm + then: + properties: + groups: + enum: [tdm_0_out_mclk_bclk_ws, tdm_0_in_mclk_bclk_ws, + tdm_0_out_data, tdm_0_in_data, tdm_1_out_mclk_bclk_ws, + tdm_1_in_mclk_bclk_ws, tdm_1_out_data, tdm_1_in_data] + - if: + properties: + function: + const: uart + then: + properties: + groups: + enum: [uart0_0_tx_rx, uart1_0_tx_rx, uart1_0_rts_cts, + uart1_1_tx_rx, uart1_1_rts_cts, uart2_0_tx_rx, + uart2_0_rts_cts, uart2_1_tx_rx, uart2_1_rts_cts, + uart2_2_tx_rx, uart2_2_rts_cts, uart2_3_tx_rx, + uart3_0_tx_rx, uart3_1_tx_rx, uart3_1_rts_cts, + uart4_0_tx_rx, uart4_1_tx_rx, uart4_1_rts_cts, + uart4_2_tx_rx, uart4_2_rts_cts, uart0_txd_rxd, + uart1_0_txd_rxd, uart1_0_cts_rts, uart1_1_txd_rxd, + uart1_1_cts_rts, uart2_0_txd_rxd, uart2_0_cts_rts, + uart2_1_txd_rxd, uart2_1_cts_rts] + - if: + properties: + function: + const: watchdog + then: + properties: + groups: + enum: [watchdog] + - if: + properties: + function: + const: wifi + then: + properties: + groups: + enum: [wf0_2g, wf0_5g] + + 'conf': + type: object + additionalProperties: false + description: | + pinconf configuration nodes. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + groups: + description: | + An array of strings. Each string contains the name of a group. + Valid values are the same as the pinmux node. + + pins: + description: | + An array of strings. Each string contains the name of a pin. + enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, + RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, + I2C_SDA, I2C_SCL, I2S2_IN, I2S3_IN, I2S4_IN, I2S2_OUT, + I2S3_OUT, I2S4_OUT, GPIO_B, MDC, MDIO, G2_TXD0, G2_TXD1, + G2_TXD2, G2_TXD3, G2_TXEN, G2_TXC, G2_RXD0, G2_RXD1, G2_RXD2, + G2_RXD3, G2_RXDV, G2_RXC, NCEB, NWEB, NREB, NDL4, NDL5, NDL6, + NDL7, NRB, NCLE, NALE, NDL0, NDL1, NDL2, NDL3, MDI_TP_P0, + MDI_TN_P0, MDI_RP_P0, MDI_RN_P0, MDI_TP_P1, MDI_TN_P1, + MDI_RP_P1, MDI_RN_P1, MDI_RP_P2, MDI_RN_P2, MDI_TP_P2, + MDI_TN_P2, MDI_TP_P3, MDI_TN_P3, MDI_RP_P3, MDI_RN_P3, + MDI_RP_P4, MDI_RN_P4, MDI_TP_P4, MDI_TN_P4, PMIC_SCL, + PMIC_SDA, SPIC1_CLK, SPIC1_MOSI, SPIC1_MISO, SPIC1_CS, + GPIO_D, WATCHDOG, RTS3_N, CTS3_N, TXD3, RXD3, PERST0_N, + PERST1_N, WLED_N, EPHY_LED0_N, AUXIN0, AUXIN1, AUXIN2, + AUXIN3, TXD4, RXD4, RTS4_N, CST4_N, PWM1, PWM2, PWM3, PWM4, + PWM5, PWM6, PWM7, GPIO_E, TOP_5G_CLK, TOP_5G_DATA, + WF0_5G_HB0, WF0_5G_HB1, WF0_5G_HB2, WF0_5G_HB3, WF0_5G_HB4, + WF0_5G_HB5, WF0_5G_HB6, XO_REQ, TOP_RST_N, SYS_WATCHDOG, + EPHY_LED0_N_JTDO, EPHY_LED1_N_JTDI, EPHY_LED2_N_JTMS, + EPHY_LED3_N_JTCLK, EPHY_LED4_N_JTRST_N, WF2G_LED_N, + WF5G_LED_N, GPIO_9, GPIO_10, GPIO_11, GPIO_12, UART1_TXD, + UART1_RXD, UART1_CTS, UART1_RTS, UART2_TXD, UART2_RXD, + UART2_CTS, UART2_RTS, SMI_MDC, SMI_MDIO, PCIE_PERESET_N, + PWM_0, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, + GPIO_6, GPIO_7, GPIO_8, UART0_TXD, UART0_RXD, TOP_2G_CLK, + TOP_2G_DATA, WF0_2G_HB0, WF0_2G_HB1, WF0_2G_HB2, WF0_2G_HB3, + WF0_2G_HB4, WF0_2G_HB5, WF0_2G_HB6] + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-enable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [4, 8, 12, 16] + + slew-rate: + enum: [0, 1] + + mediatek,tdsel: + description: | + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: | + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pins + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10211000 { + compatible = "mediatek,mt7622-pinctrl"; + reg = <0 0x10211000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + + pinctrl_eth_default: eth-0 { + mux-mdio { + groups = "mdc_mdio"; + function = "eth"; + drive-strength = <12>; + }; + + mux-gmac2 { + groups = "rgmii_via_gmac2"; + function = "eth"; + drive-strength = <12>; + }; + + mux-esw { + groups = "esw"; + function = "eth"; + drive-strength = <8>; + }; + + conf-mdio { + pins = "MDC"; + bias-pull-up; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml new file mode 100644 index 000000000000..cc1509e9b981 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8183-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8183 Pin Controller Device Tree Bindings + +maintainers: + - Sean Wang <sean.wang@kernel.org> + +description: |+ + The MediaTek's MT8183 Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8183-pinctrl + + reg: + minItems: 10 + maxItems: 10 + + reg-names: + items: + - const: iocfg0 + - const: iocfg1 + - const: iocfg2 + - const: iocfg3 + - const: iocfg4 + - const: iocfg5 + - const: iocfg6 + - const: iocfg7 + - const: iocfg8 + - const: eint + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + Number of cells in GPIO specifier. Since the generic GPIO + binding is used, the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + + gpio-ranges: + minItems: 1 + maxItems: 5 + description: | + GPIO valid number range. + + interrupt-controller: true + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + - gpio-ranges + +patternProperties: + '-[0-9]+$': + type: object + additionalProperties: false + patternProperties: + 'pins': + type: object + additionalProperties: false + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: "/schemas/pinctrl/pincfg-node.yaml" + + properties: + pinmux: + description: + integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in <soc>-pinfunc.h directly. + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-enable: true + + input-disable: true + + output-low: true + + output-high: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + + mediatek,drive-strength-adv: + description: | + Describe the specific driving setup property. + For I2C pins, the existing generic driving setup can only support + 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they + can support 0.125/0.25/0.5/1mA adjustment. If we enable specific + driving setup, the existing generic setup will be disabled. + The specific driving setup is controlled by E1E0EN. + When E1=0/E0=0, the strength is 0.125mA. + When E1=0/E0=1, the strength is 0.25mA. + When E1=1/E0=0, the strength is 0.5mA. + When E1=1/E0=1, the strength is 1mA. + EN is used to enable or disable the specific driving setup. + Valid arguments are described as below: + 0: (E1, E0, EN) = (0, 0, 0) + 1: (E1, E0, EN) = (0, 0, 1) + 2: (E1, E0, EN) = (0, 1, 0) + 3: (E1, E0, EN) = (0, 1, 1) + 4: (E1, E0, EN) = (1, 0, 0) + 5: (E1, E0, EN) = (1, 0, 1) + 6: (E1, E0, EN) = (1, 1, 0) + 7: (E1, E0, EN) = (1, 1, 1) + So the valid arguments are from 0 to 7. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + mediatek,pull-up-adv: + description: | + Pull up setings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,pull-down-adv: + description: | + Pull down settings for 2 pull resistors, R0 and R1. User can + configure those special pins. Valid arguments are described as below: + 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. + 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. + 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. + 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + mediatek,tdsel: + description: | + An integer describing the steps for output level shifter duty + cycle when asserted (high pulse width adjustment). Valid arguments + are from 0 to 15. + $ref: /schemas/types.yaml#/definitions/uint32 + + mediatek,rdsel: + description: | + An integer describing the steps for input level shifter duty cycle + when asserted (high pulse width adjustment). Valid arguments are + from 0 to 63. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - pinmux + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/pinctrl/mt8183-pinfunc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pio: pinctrl@10005000 { + compatible = "mediatek,mt8183-pinctrl"; + reg = <0 0x10005000 0 0x1000>, + <0 0x11f20000 0 0x1000>, + <0 0x11e80000 0 0x1000>, + <0 0x11e70000 0 0x1000>, + <0 0x11e90000 0 0x1000>, + <0 0x11d30000 0 0x1000>, + <0 0x11d20000 0 0x1000>, + <0 0x11c50000 0 0x1000>, + <0 0x11f30000 0 0x1000>, + <0 0x1000b000 0 0x1000>; + reg-names = "iocfg0", "iocfg1", "iocfg2", + "iocfg3", "iocfg4", "iocfg5", + "iocfg6", "iocfg7", "iocfg8", + "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 192>; + interrupt-controller; + interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + + i2c0_pins_a: i2c-0 { + pins1 { + pinmux = <PINMUX_GPIO48__FUNC_SCL5>, + <PINMUX_GPIO49__FUNC_SDA5>; + mediatek,pull-up-adv = <3>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c1_pins_a: i2c-1 { + pins { + pinmux = <PINMUX_GPIO50__FUNC_SCL3>, + <PINMUX_GPIO51__FUNC_SDA3>; + mediatek,pull-down-adv = <2>; + mediatek,drive-strength-adv = <4>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt deleted file mode 100644 index 5fe2c26c28bf..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ /dev/null @@ -1,156 +0,0 @@ -* Mediatek MT65XX Pin Controller - -The Mediatek's Pin controller is used to control SoC pins. - -Required properties: -- compatible: value should be one of the following. - "mediatek,mt2701-pinctrl", compatible with mt2701 pinctrl. - "mediatek,mt2712-pinctrl", compatible with mt2712 pinctrl. - "mediatek,mt6397-pinctrl", compatible with mt6397 pinctrl. - "mediatek,mt7623-pinctrl", compatible with mt7623 pinctrl. - "mediatek,mt8127-pinctrl", compatible with mt8127 pinctrl. - "mediatek,mt8135-pinctrl", compatible with mt8135 pinctrl. - "mediatek,mt8167-pinctrl", compatible with mt8167 pinctrl. - "mediatek,mt8173-pinctrl", compatible with mt8173 pinctrl. - "mediatek,mt8365-pinctrl", compatible with mt8365 pinctrl. - "mediatek,mt8516-pinctrl", compatible with mt8516 pinctrl. -- pins-are-numbered: Specify the subnodes are using numbered pinmux to - specify pins. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. - - Eg: <&pio 6 0> - <[phandle of the gpio controller node] - [line number within the gpio controller] - [flags]> - - Values for gpio specifier: - - Line number: is a value between 0 to 202. - - Flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>. - Only the following flags are supported: - 0 - GPIO_ACTIVE_HIGH - 1 - GPIO_ACTIVE_LOW - -Optional properties: -- mediatek,pctl-regmap: Should be a phandle of the syscfg node. -- reg: physicall address base for EINT registers -- interrupt-controller: Marks the device node as an interrupt controller -- #interrupt-cells: Should be two. -- interrupts : The interrupt outputs from the controller. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices. - -Subnode format -A pinctrl node should contain at least one subnodes representing the -pinctrl groups available on the machine. Each subnode will list the -pins it needs, and how they should be configured, with regard to muxer -configuration, pullups, drive strength, input enable/disable and input schmitt. - - node { - pinmux = <PIN_NUMBER_PINMUX>; - GENERIC_PINCONFIG; - }; - -Required properties: -- pinmux: integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in boot/dts/<soc>-pinfunc.h directly. - -Optional properties: -- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, - bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, output-high, - input-schmitt-enable, input-schmitt-disable and drive-strength are valid. - - Some special pins have extra pull up strength, there are R0 and R1 pull-up - resistors available, but for user, it's only need to set R1R0 as 00, 01, 10 or 11. - So when config bias-pull-up, it support arguments for those special pins. - Some macros have been defined for this usage, such as MTK_PUPD_SET_R1R0_00. - See dt-bindings/pinctrl/mt65xx.h. - - When config drive-strength, it can support some arguments, such as - MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. - -Examples: - -#include "mt8135-pinfunc.h" - -... -{ - syscfg_pctl_a: syscfg-pctl-a@10005000 { - compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; - reg = <0 0x10005000 0 0x1000>; - }; - - syscfg_pctl_b: syscfg-pctl-b@1020c020 { - compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; - reg = <0 0x1020C020 0 0x1000>; - }; - - pinctrl@1c20800 { - compatible = "mediatek,mt8135-pinctrl"; - reg = <0 0x1000B000 0 0x1000>; - mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; - pins-are-numbered; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - - i2c0_pins_a: i2c0@0 { - pins1 { - pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, - <MT8135_PIN_101_SCL0__FUNC_SCL0>; - bias-disable; - }; - }; - - i2c1_pins_a: i2c1@0 { - pins { - pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, - <MT8135_PIN_196_SCL1__FUNC_SCL1>; - bias-pull-up = <55>; - }; - }; - - i2c2_pins_a: i2c2@0 { - pins1 { - pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; - bias-pull-down; - }; - - pins2 { - pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>; - bias-pull-up; - }; - }; - - i2c3_pins_a: i2c3@0 { - pins1 { - pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, - <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; - bias-pull-up = <55>; - }; - - pins2 { - pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>, - <MT8135_PIN_36_SDA3__FUNC_SDA3>; - output-low; - bias-pull-up = <55>; - }; - - pins3 { - pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>, - <MT8135_PIN_60_JTDI__FUNC_JTDI>; - drive-strength = <32>; - }; - }; - - ... - } -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt deleted file mode 100644 index bd83401e6179..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt6797.txt +++ /dev/null @@ -1,83 +0,0 @@ -* MediaTek MT6797 Pin Controller - -The MediaTek's MT6797 Pin controller is used to control SoC pins. - -Required properties: -- compatible: Value should be one of the following. - "mediatek,mt6797-pinctrl", compatible with mt6797 pinctrl. -- reg: Should contain address and size for gpio, iocfgl, iocfgb, - iocfgr and iocfgt register bases. -- reg-names: An array of strings describing the "reg" entries. Must - contain "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt". -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the gpio pin number - and the second cell is used for optional parameters. - -Optional properties: -- interrupt-controller: Marks the device node as an interrupt controller. -- #interrupt-cells: Should be two. -- interrupts : The interrupt outputs from the controller. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices. - -Subnode format -A pinctrl node should contain at least one subnodes representing the -pinctrl groups available on the machine. Each subnode will list the -pins it needs, and how they should be configured, with regard to muxer -configuration, pullups, drive strength, input enable/disable and input schmitt. - - node { - pinmux = <PIN_NUMBER_PINMUX>; - GENERIC_PINCONFIG; - }; - -Required properties: -- pinmux: Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. - -Optional properties: -- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, - bias-pull, bias-pull-down, input-enable, input-schmitt-enable, - input-schmitt-disable, output-enable output-low, output-high, - drive-strength, and slew-rate are valid. - - Valid arguments for 'slew-rate' are '0' for no slew rate controlled and - '1' for slower slew rate respectively. Valid arguments for 'drive-strength' - is limited, such as 2, 4, 8, 12, or 16 in mA. - - Some optional vendor properties as defined are valid to specify in a - pinconf subnode: - - mediatek,tdsel: An integer describing the steps for output level shifter - duty cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 15. - - mediatek,rdsel: An integer describing the steps for input level shifter - duty cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 63. - - mediatek,pull-up-adv: An integer describing the code R1R0 as 0, 1, 2 - or 3 for the advanced pull-up resistors. - - mediatek,pull-down-adv: An integer describing the code R1R0 as 0, 1, 2, - or 3 for the advanced pull-down resistors. - -Examples: - - pio: pinctrl@10005000 { - compatible = "mediatek,mt6797-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x10002000 0 0x400>, - <0 0x10002400 0 0x400>, - <0 0x10002800 0 0x400>, - <0 0x10002C00 0 0x400>; - reg-names = "gpio", "iocfgl", "iocfgb", - "iocfgr", "iocfgt"; - gpio-controller; - #gpio-cells = <2>; - - uart1_pins_a: uart1 { - pins1 { - pinmux = <MT6797_GPIO232__FUNC_URXD1>, - <MT6797_GPIO233__FUNC_UTXD1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt deleted file mode 100644 index 7a7aca1ed705..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt +++ /dev/null @@ -1,490 +0,0 @@ -== MediaTek MT7622 pinctrl controller == - -Required properties for the root node: - - compatible: Should be one of the following - "mediatek,mt7622-pinctrl" for MT7622 SoC - "mediatek,mt7629-pinctrl" for MT7629 SoC - - reg: offset and length of the pinctrl space - - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be two. The first cell is the pin number and the - second is the GPIO flags. - -Optional properties: -- interrupt-controller : Marks the device node as an interrupt controller - -If the property interrupt-controller is defined, following property is required -- reg-names: A string describing the "reg" entries. Must contain "eint". -- interrupts : The interrupt output from the controller. -- #interrupt-cells: Should be two. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -MT7622 pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, slew rate, etc. - -We support 2 types of configuration nodes. Those nodes can be either pinmux -nodes or pinconf nodes. Each configuration node can consist of multiple nodes -describing the pinmux and pinconf options. - -The name of each subnode doesn't matter as long as it is unique; all subnodes -should be enumerated and processed purely based on their content. - -== pinmux nodes content == - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - -Required properties are: - - groups: An array of strings. Each string contains the name of a group. - Valid values for these names are listed below. - - function: A string containing the name of the function to mux to the - group. Valid values for function names are listed below. - -== pinconf nodes content == - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinconf subnode: - -Required properties are: - - pins: An array of strings. Each string contains the name of a pin. - Valid values for these names are listed below. - - groups: An array of strings. Each string contains the name of a group. - Valid values for these names are listed below. - -Optional properies are: - bias-disable, bias-pull, bias-pull-down, input-enable, - input-schmitt-enable, input-schmitt-disable, output-enable - output-low, output-high, drive-strength, slew-rate - - Valid arguments for 'slew-rate' are '0' for no slew rate controlled and '1' for - slower slew rate respectively. - Valid arguments for 'drive-strength', 4, 8, 12, or 16 in mA. - -The following specific properties as defined are valid to specify in a pinconf -subnode: - -Optional properties are: - - mediatek,tdsel: An integer describing the steps for output level shifter duty - cycle when asserted (high pulse width adjustment). Valid arguments are from 0 - to 15. - - mediatek,rdsel: An integer describing the steps for input level shifter duty - cycle when asserted (high pulse width adjustment). Valid arguments are from 0 - to 63. - -== Valid values for pins, function and groups on MT7622 == - -Valid values for pins are: -pins can be referenced via the pin names as the below table shown and the -related physical number is also put ahead of those names which helps cross -references to pins between groups to know whether pins assignment conflict -happens among devices try to acquire those available pins. - - Pin #: Valid values for pins - ----------------------------- - PIN 0: "GPIO_A" - PIN 1: "I2S1_IN" - PIN 2: "I2S1_OUT" - PIN 3: "I2S_BCLK" - PIN 4: "I2S_WS" - PIN 5: "I2S_MCLK" - PIN 6: "TXD0" - PIN 7: "RXD0" - PIN 8: "SPI_WP" - PIN 9: "SPI_HOLD" - PIN 10: "SPI_CLK" - PIN 11: "SPI_MOSI" - PIN 12: "SPI_MISO" - PIN 13: "SPI_CS" - PIN 14: "I2C_SDA" - PIN 15: "I2C_SCL" - PIN 16: "I2S2_IN" - PIN 17: "I2S3_IN" - PIN 18: "I2S4_IN" - PIN 19: "I2S2_OUT" - PIN 20: "I2S3_OUT" - PIN 21: "I2S4_OUT" - PIN 22: "GPIO_B" - PIN 23: "MDC" - PIN 24: "MDIO" - PIN 25: "G2_TXD0" - PIN 26: "G2_TXD1" - PIN 27: "G2_TXD2" - PIN 28: "G2_TXD3" - PIN 29: "G2_TXEN" - PIN 30: "G2_TXC" - PIN 31: "G2_RXD0" - PIN 32: "G2_RXD1" - PIN 33: "G2_RXD2" - PIN 34: "G2_RXD3" - PIN 35: "G2_RXDV" - PIN 36: "G2_RXC" - PIN 37: "NCEB" - PIN 38: "NWEB" - PIN 39: "NREB" - PIN 40: "NDL4" - PIN 41: "NDL5" - PIN 42: "NDL6" - PIN 43: "NDL7" - PIN 44: "NRB" - PIN 45: "NCLE" - PIN 46: "NALE" - PIN 47: "NDL0" - PIN 48: "NDL1" - PIN 49: "NDL2" - PIN 50: "NDL3" - PIN 51: "MDI_TP_P0" - PIN 52: "MDI_TN_P0" - PIN 53: "MDI_RP_P0" - PIN 54: "MDI_RN_P0" - PIN 55: "MDI_TP_P1" - PIN 56: "MDI_TN_P1" - PIN 57: "MDI_RP_P1" - PIN 58: "MDI_RN_P1" - PIN 59: "MDI_RP_P2" - PIN 60: "MDI_RN_P2" - PIN 61: "MDI_TP_P2" - PIN 62: "MDI_TN_P2" - PIN 63: "MDI_TP_P3" - PIN 64: "MDI_TN_P3" - PIN 65: "MDI_RP_P3" - PIN 66: "MDI_RN_P3" - PIN 67: "MDI_RP_P4" - PIN 68: "MDI_RN_P4" - PIN 69: "MDI_TP_P4" - PIN 70: "MDI_TN_P4" - PIN 71: "PMIC_SCL" - PIN 72: "PMIC_SDA" - PIN 73: "SPIC1_CLK" - PIN 74: "SPIC1_MOSI" - PIN 75: "SPIC1_MISO" - PIN 76: "SPIC1_CS" - PIN 77: "GPIO_D" - PIN 78: "WATCHDOG" - PIN 79: "RTS3_N" - PIN 80: "CTS3_N" - PIN 81: "TXD3" - PIN 82: "RXD3" - PIN 83: "PERST0_N" - PIN 84: "PERST1_N" - PIN 85: "WLED_N" - PIN 86: "EPHY_LED0_N" - PIN 87: "AUXIN0" - PIN 88: "AUXIN1" - PIN 89: "AUXIN2" - PIN 90: "AUXIN3" - PIN 91: "TXD4" - PIN 92: "RXD4" - PIN 93: "RTS4_N" - PIN 94: "CST4_N" - PIN 95: "PWM1" - PIN 96: "PWM2" - PIN 97: "PWM3" - PIN 98: "PWM4" - PIN 99: "PWM5" - PIN 100: "PWM6" - PIN 101: "PWM7" - PIN 102: "GPIO_E" - -Valid values for function are: - "emmc", "eth", "i2c", "i2s", "ir", "led", "flash", "pcie", - "pmic", "pwm", "sd", "spi", "tdm", "uart", "watchdog" - -Valid values for groups are: -additional data is put followingly with valid value allowing us to know which -applicable function and which relevant pins (in pin#) are able applied for that -group. - - Valid value function pins (in pin#) - ------------------------------------------------------------------------- - "emmc" "emmc" 40, 41, 42, 43, 44, 45, - 47, 48, 49, 50 - "emmc_rst" "emmc" 37 - "esw" "eth" 51, 52, 53, 54, 55, 56, - 57, 58, 59, 60, 61, 62, - 63, 64, 65, 66, 67, 68, - 69, 70 - "esw_p0_p1" "eth" 51, 52, 53, 54, 55, 56, - 57, 58 - "esw_p2_p3_p4" "eth" 59, 60, 61, 62, 63, 64, - 65, 66, 67, 68, 69, 70 - "rgmii_via_esw" "eth" 59, 60, 61, 62, 63, 64, - 65, 66, 67, 68, 69, 70 - "rgmii_via_gmac1" "eth" 59, 60, 61, 62, 63, 64, - 65, 66, 67, 68, 69, 70 - "rgmii_via_gmac2" "eth" 25, 26, 27, 28, 29, 30, - 31, 32, 33, 34, 35, 36 - "mdc_mdio" "eth" 23, 24 - "i2c0" "i2c" 14, 15 - "i2c1_0" "i2c" 55, 56 - "i2c1_1" "i2c" 73, 74 - "i2c1_2" "i2c" 87, 88 - "i2c2_0" "i2c" 57, 58 - "i2c2_1" "i2c" 75, 76 - "i2c2_2" "i2c" 89, 90 - "i2s_in_mclk_bclk_ws" "i2s" 3, 4, 5 - "i2s1_in_data" "i2s" 1 - "i2s2_in_data" "i2s" 16 - "i2s3_in_data" "i2s" 17 - "i2s4_in_data" "i2s" 18 - "i2s_out_mclk_bclk_ws" "i2s" 3, 4, 5 - "i2s1_out_data" "i2s" 2 - "i2s2_out_data" "i2s" 19 - "i2s3_out_data" "i2s" 20 - "i2s4_out_data" "i2s" 21 - "ir_0_tx" "ir" 16 - "ir_1_tx" "ir" 59 - "ir_2_tx" "ir" 99 - "ir_0_rx" "ir" 17 - "ir_1_rx" "ir" 60 - "ir_2_rx" "ir" 100 - "ephy_leds" "led" 86, 91, 92, 93, 94 - "ephy0_led" "led" 86 - "ephy1_led" "led" 91 - "ephy2_led" "led" 92 - "ephy3_led" "led" 93 - "ephy4_led" "led" 94 - "wled" "led" 85 - "par_nand" "flash" 37, 38, 39, 40, 41, 42, - 43, 44, 45, 46, 47, 48, - 49, 50 - "snfi" "flash" 8, 9, 10, 11, 12, 13 - "spi_nor" "flash" 8, 9, 10, 11, 12, 13 - "pcie0_0_waken" "pcie" 14 - "pcie0_1_waken" "pcie" 79 - "pcie1_0_waken" "pcie" 14 - "pcie0_0_clkreq" "pcie" 15 - "pcie0_1_clkreq" "pcie" 80 - "pcie1_0_clkreq" "pcie" 15 - "pcie0_pad_perst" "pcie" 83 - "pcie1_pad_perst" "pcie" 84 - "pmic_bus" "pmic" 71, 72 - "pwm_ch1_0" "pwm" 51 - "pwm_ch1_1" "pwm" 73 - "pwm_ch1_2" "pwm" 95 - "pwm_ch2_0" "pwm" 52 - "pwm_ch2_1" "pwm" 74 - "pwm_ch2_2" "pwm" 96 - "pwm_ch3_0" "pwm" 53 - "pwm_ch3_1" "pwm" 75 - "pwm_ch3_2" "pwm" 97 - "pwm_ch4_0" "pwm" 54 - "pwm_ch4_1" "pwm" 67 - "pwm_ch4_2" "pwm" 76 - "pwm_ch4_3" "pwm" 98 - "pwm_ch5_0" "pwm" 68 - "pwm_ch5_1" "pwm" 77 - "pwm_ch5_2" "pwm" 99 - "pwm_ch6_0" "pwm" 69 - "pwm_ch6_1" "pwm" 78 - "pwm_ch6_2" "pwm" 81 - "pwm_ch6_3" "pwm" 100 - "pwm_ch7_0" "pwm" 70 - "pwm_ch7_1" "pwm" 82 - "pwm_ch7_2" "pwm" 101 - "sd_0" "sd" 16, 17, 18, 19, 20, 21 - "sd_1" "sd" 25, 26, 27, 28, 29, 30 - "spic0_0" "spi" 63, 64, 65, 66 - "spic0_1" "spi" 79, 80, 81, 82 - "spic1_0" "spi" 67, 68, 69, 70 - "spic1_1" "spi" 73, 74, 75, 76 - "spic2_0_wp_hold" "spi" 8, 9 - "spic2_0" "spi" 10, 11, 12, 13 - "tdm_0_out_mclk_bclk_ws" "tdm" 8, 9, 10 - "tdm_0_in_mclk_bclk_ws" "tdm" 11, 12, 13 - "tdm_0_out_data" "tdm" 20 - "tdm_0_in_data" "tdm" 21 - "tdm_1_out_mclk_bclk_ws" "tdm" 57, 58, 59 - "tdm_1_in_mclk_bclk_ws" "tdm" 60, 61, 62 - "tdm_1_out_data" "tdm" 55 - "tdm_1_in_data" "tdm" 56 - "uart0_0_tx_rx" "uart" 6, 7 - "uart1_0_tx_rx" "uart" 55, 56 - "uart1_0_rts_cts" "uart" 57, 58 - "uart1_1_tx_rx" "uart" 73, 74 - "uart1_1_rts_cts" "uart" 75, 76 - "uart2_0_tx_rx" "uart" 3, 4 - "uart2_0_rts_cts" "uart" 1, 2 - "uart2_1_tx_rx" "uart" 51, 52 - "uart2_1_rts_cts" "uart" 53, 54 - "uart2_2_tx_rx" "uart" 59, 60 - "uart2_2_rts_cts" "uart" 61, 62 - "uart2_3_tx_rx" "uart" 95, 96 - "uart3_0_tx_rx" "uart" 57, 58 - "uart3_1_tx_rx" "uart" 81, 82 - "uart3_1_rts_cts" "uart" 79, 80 - "uart4_0_tx_rx" "uart" 61, 62 - "uart4_1_tx_rx" "uart" 91, 92 - "uart4_1_rts_cts" "uart" 93, 94 - "uart4_2_tx_rx" "uart" 97, 98 - "uart4_2_rts_cts" "uart" 95, 96 - "watchdog" "watchdog" 78 - - -== Valid values for pins, function and groups on MT7629 == - - Pin #: Valid values for pins - ----------------------------- - PIN 0: "TOP_5G_CLK" - PIN 1: "TOP_5G_DATA" - PIN 2: "WF0_5G_HB0" - PIN 3: "WF0_5G_HB1" - PIN 4: "WF0_5G_HB2" - PIN 5: "WF0_5G_HB3" - PIN 6: "WF0_5G_HB4" - PIN 7: "WF0_5G_HB5" - PIN 8: "WF0_5G_HB6" - PIN 9: "XO_REQ" - PIN 10: "TOP_RST_N" - PIN 11: "SYS_WATCHDOG" - PIN 12: "EPHY_LED0_N_JTDO" - PIN 13: "EPHY_LED1_N_JTDI" - PIN 14: "EPHY_LED2_N_JTMS" - PIN 15: "EPHY_LED3_N_JTCLK" - PIN 16: "EPHY_LED4_N_JTRST_N" - PIN 17: "WF2G_LED_N" - PIN 18: "WF5G_LED_N" - PIN 19: "I2C_SDA" - PIN 20: "I2C_SCL" - PIN 21: "GPIO_9" - PIN 22: "GPIO_10" - PIN 23: "GPIO_11" - PIN 24: "GPIO_12" - PIN 25: "UART1_TXD" - PIN 26: "UART1_RXD" - PIN 27: "UART1_CTS" - PIN 28: "UART1_RTS" - PIN 29: "UART2_TXD" - PIN 30: "UART2_RXD" - PIN 31: "UART2_CTS" - PIN 32: "UART2_RTS" - PIN 33: "MDI_TP_P1" - PIN 34: "MDI_TN_P1" - PIN 35: "MDI_RP_P1" - PIN 36: "MDI_RN_P1" - PIN 37: "MDI_RP_P2" - PIN 38: "MDI_RN_P2" - PIN 39: "MDI_TP_P2" - PIN 40: "MDI_TN_P2" - PIN 41: "MDI_TP_P3" - PIN 42: "MDI_TN_P3" - PIN 43: "MDI_RP_P3" - PIN 44: "MDI_RN_P3" - PIN 45: "MDI_RP_P4" - PIN 46: "MDI_RN_P4" - PIN 47: "MDI_TP_P4" - PIN 48: "MDI_TN_P4" - PIN 49: "SMI_MDC" - PIN 50: "SMI_MDIO" - PIN 51: "PCIE_PERESET_N" - PIN 52: "PWM_0" - PIN 53: "GPIO_0" - PIN 54: "GPIO_1" - PIN 55: "GPIO_2" - PIN 56: "GPIO_3" - PIN 57: "GPIO_4" - PIN 58: "GPIO_5" - PIN 59: "GPIO_6" - PIN 60: "GPIO_7" - PIN 61: "GPIO_8" - PIN 62: "SPI_CLK" - PIN 63: "SPI_CS" - PIN 64: "SPI_MOSI" - PIN 65: "SPI_MISO" - PIN 66: "SPI_WP" - PIN 67: "SPI_HOLD" - PIN 68: "UART0_TXD" - PIN 69: "UART0_RXD" - PIN 70: "TOP_2G_CLK" - PIN 71: "TOP_2G_DATA" - PIN 72: "WF0_2G_HB0" - PIN 73: "WF0_2G_HB1" - PIN 74: "WF0_2G_HB2" - PIN 75: "WF0_2G_HB3" - PIN 76: "WF0_2G_HB4" - PIN 77: "WF0_2G_HB5" - PIN 78: "WF0_2G_HB6" - -Valid values for function are: - "eth", "i2c", "led", "flash", "pcie", "pwm", "spi", "uart", - "watchdog", "wifi" - -Valid values for groups are: - Valid value function pins (in pin#) - ---------------------------------------------------------------- - "mdc_mdio" "eth" 23, 24 - "i2c_0" "i2c" 19, 20 - "i2c_1" "i2c" 53, 54 - "ephy_leds" "led" 12, 13, 14, 15, 16, - 17, 18 - "ephy0_led" "led" 12 - "ephy1_led" "led" 13 - "ephy2_led" "led" 14 - "ephy3_led" "led" 15 - "ephy4_led" "led" 16 - "wf2g_led" "led" 17 - "wf5g_led" "led" 18 - "snfi" "flash" 62, 63, 64, 65, 66, 67 - "spi_nor" "flash" 62, 63, 64, 65, 66, 67 - "pcie_pereset" "pcie" 51 - "pcie_wake" "pcie" 55 - "pcie_clkreq" "pcie" 56 - "pwm_0" "pwm" 52 - "pwm_1" "pwm" 61 - "spi_0" "spi" 21, 22, 23, 24 - "spi_1" "spi" 62, 63, 64, 65 - "spi_wp" "spi" 66 - "spi_hold" "spi" 67 - "uart0_txd_rxd" "uart" 68, 69 - "uart1_0_txd_rxd" "uart" 25, 26 - "uart1_0_cts_rts" "uart" 27, 28 - "uart1_1_txd_rxd" "uart" 53, 54 - "uart1_1_cts_rts" "uart" 55, 56 - "uart2_0_txd_rxd" "uart" 29, 30 - "uart2_0_cts_rts" "uart" 31, 32 - "uart2_1_txd_rxd" "uart" 57, 58 - "uart2_1_cts_rts" "uart" 59, 60 - "watchdog" "watchdog" 11 - "wf0_2g" "wifi" 70, 71, 72, 73, 74, - 75, 76, 77, 78 - "wf0_5g" "wifi" 0, 1, 2, 3, 4, 5, 6, - 7, 8, 9, 10 - -Example: - - pio: pinctrl@10211000 { - compatible = "mediatek,mt7622-pinctrl"; - reg = <0 0x10211000 0 0x1000>; - gpio-controller; - #gpio-cells = <2>; - - pinctrl_eth_default: eth-default { - mux-mdio { - groups = "mdc_mdio"; - function = "eth"; - drive-strength = <12>; - }; - - mux-gmac2 { - groups = "gmac2"; - function = "eth"; - drive-strength = <12>; - }; - - mux-esw { - groups = "esw"; - function = "eth"; - drive-strength = <8>; - }; - - conf-mdio { - pins = "MDC"; - bias-pull-up; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt deleted file mode 100644 index eccbe3f55d3f..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8183.txt +++ /dev/null @@ -1,132 +0,0 @@ -* Mediatek MT8183 Pin Controller - -The Mediatek's Pin controller is used to control SoC pins. - -Required properties: -- compatible: value should be one of the following. - "mediatek,mt8183-pinctrl", compatible with mt8183 pinctrl. -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. -- gpio-ranges : gpio valid number range. -- reg: physical address base for gpio base registers. There are 10 GPIO - physical address base in mt8183. - -Optional properties: -- reg-names: gpio base register names. There are 10 gpio base register - names in mt8183. They are "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4", - "iocfg5", "iocfg6", "iocfg7", "iocfg8", "eint". -- interrupt-controller: Marks the device node as an interrupt controller -- #interrupt-cells: Should be two. -- interrupts : The interrupt outputs to sysirq. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices. - -Subnode format -A pinctrl node should contain at least one subnodes representing the -pinctrl groups available on the machine. Each subnode will list the -pins it needs, and how they should be configured, with regard to muxer -configuration, pullups, drive strength, input enable/disable and input schmitt. - - node { - pinmux = <PIN_NUMBER_PINMUX>; - GENERIC_PINCONFIG; - }; - -Required properties: -- pinmux: integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in boot/dts/<soc>-pinfunc.h directly. - -Optional properties: -- GENERIC_PINCONFIG: is the generic pinconfig options to use, bias-disable, - bias-pull-down, bias-pull-up, input-enable, input-disable, output-low, - output-high, input-schmitt-enable, input-schmitt-disable - and drive-strength are valid. - - Some special pins have extra pull up strength, there are R0 and R1 pull-up - resistors available, but for user, it's only need to set R1R0 as 00, 01, - 10 or 11. So It needs config "mediatek,pull-up-adv" or - "mediatek,pull-down-adv" to support arguments for those special pins. - Valid arguments are from 0 to 3. - - mediatek,tdsel: An integer describing the steps for output level shifter - duty cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 15. - mediatek,rdsel: An integer describing the steps for input level shifter - duty cycle when asserted (high pulse width adjustment). Valid arguments - are from 0 to 63. - - When config drive-strength, it can support some arguments, such as - MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. - It can only support 2/4/6/8/10/12/14/16mA in mt8183. - For I2C pins, there are existing generic driving setup and the specific - driving setup. I2C pins can only support 2/4/6/8/10/12/14/16mA driving - adjustment in generic driving setup. But in specific driving setup, - they can support 0.125/0.25/0.5/1mA adjustment. If we enable specific - driving setup for I2C pins, the existing generic driving setup will be - disabled. For some special features, we need the I2C pins specific - driving setup. The specific driving setup is controlled by E1E0EN. - So we need add extra vendor driving preperty instead of - the generic driving property. - We can add "mediatek,drive-strength-adv = <XXX>;" to describe the specific - driving setup property. "XXX" means the value of E1E0EN. EN is 0 or 1. - It is used to enable or disable the specific driving setup. - E1E0 is used to describe the detail strength specification of the I2C pin. - When E1=0/E0=0, the strength is 0.125mA. - When E1=0/E0=1, the strength is 0.25mA. - When E1=1/E0=0, the strength is 0.5mA. - When E1=1/E0=1, the strength is 1mA. - So the valid arguments of "mediatek,drive-strength-adv" are from 0 to 7. - -Examples: - -#include "mt8183-pinfunc.h" - -... -{ - pio: pinctrl@10005000 { - compatible = "mediatek,mt8183-pinctrl"; - reg = <0 0x10005000 0 0x1000>, - <0 0x11f20000 0 0x1000>, - <0 0x11e80000 0 0x1000>, - <0 0x11e70000 0 0x1000>, - <0 0x11e90000 0 0x1000>, - <0 0x11d30000 0 0x1000>, - <0 0x11d20000 0 0x1000>, - <0 0x11c50000 0 0x1000>, - <0 0x11f30000 0 0x1000>, - <0 0x1000b000 0 0x1000>; - reg-names = "iocfg0", "iocfg1", "iocfg2", - "iocfg3", "iocfg4", "iocfg5", - "iocfg6", "iocfg7", "iocfg8", - "eint"; - gpio-controller; - #gpio-cells = <2>; - gpio-ranges = <&pio 0 0 192>; - interrupt-controller; - interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <2>; - - i2c0_pins_a: i2c0 { - pins1 { - pinmux = <PINMUX_GPIO48__FUNC_SCL5>, - <PINMUX_GPIO49__FUNC_SDA5>; - mediatek,pull-up-adv = <3>; - mediatek,drive-strength-adv = <7>; - }; - }; - - i2c1_pins_a: i2c1 { - pins { - pinmux = <PINMUX_GPIO50__FUNC_SCL3>, - <PINMUX_GPIO51__FUNC_SDA3>; - mediatek,pull-down-adv = <2>; - mediatek,drive-strength-adv = <4>; - }; - }; - ... - }; -}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml index 2f12ec59eee5..e17a399e0904 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -80,10 +80,7 @@ patternProperties: as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. drive-strength: - description: | - It can support some arguments which is from 0 to 7. It can only support - 2/4/6/8/10/12/14/16mA in mt8195. - enum: [0, 1, 2, 3, 4, 5, 6, 7] + enum: [2, 4, 6, 8, 10, 12, 14, 16] bias-pull-down: true diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml new file mode 100644 index 000000000000..3b02dc6626ed --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,mdm9607-pinctrl.yaml @@ -0,0 +1,133 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. MDM9607 TLMM block + +maintainers: + - Konrad Dybcio <konrad.dybcio@somainline.org> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + MDM9607 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,mdm9607-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-mdm9607-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-mdm9607-tlmm-state" + +'$defs': + qcom-mdm9607-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, + sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, + qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, + atest_char1, atest_char2, atest_char3, + atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native, + atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b, + bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, + blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3, + blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2, + codec_int, codec_rst, coex_uart, cri_trng, cri_trng0, + cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b, + ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst, + gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, + gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio, + gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync, + nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a, + nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2, + pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a, + pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a, + ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, + qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, + qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1, + rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2, + sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int, + uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, + uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ] + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@1000000 { + compatible = "qcom,mdm9607-tlmm"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&msmgpio 0 0 80>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt deleted file mode 100644 index 161216daf463..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ /dev/null @@ -1,288 +0,0 @@ -Qualcomm PMIC GPIO block - -This binding describes the GPIO block(s) found in the 8xxx series of -PMIC's from Qualcomm. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,pm8005-gpio" - "qcom,pm8018-gpio" - "qcom,pm8038-gpio" - "qcom,pm8058-gpio" - "qcom,pm8916-gpio" - "qcom,pm8917-gpio" - "qcom,pm8921-gpio" - "qcom,pm8941-gpio" - "qcom,pm8950-gpio" - "qcom,pm8994-gpio" - "qcom,pm8998-gpio" - "qcom,pma8084-gpio" - "qcom,pmi8950-gpio" - "qcom,pmi8994-gpio" - "qcom,pmi8998-gpio" - "qcom,pms405-gpio" - "qcom,pm660-gpio" - "qcom,pm660l-gpio" - "qcom,pm8150-gpio" - "qcom,pm8150b-gpio" - "qcom,pm8350-gpio" - "qcom,pm8350b-gpio" - "qcom,pm8350c-gpio" - "qcom,pmk8350-gpio" - "qcom,pm7325-gpio" - "qcom,pmr735a-gpio" - "qcom,pmr735b-gpio" - "qcom,pm6150-gpio" - "qcom,pm6150l-gpio" - "qcom,pm8008-gpio" - "qcom,pmx55-gpio" - - And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" - if the device is on an spmi bus or an ssbi bus respectively - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register base of the GPIO block and length. - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: Must contain an array of encoded interrupt specifiers for - each available GPIO - -- gpio-controller: - Usage: required - Value type: <none> - Definition: Mark the device node as a GPIO controller - -- #gpio-cells: - Usage: required - Value type: <u32> - Definition: Must be 2; - the first cell will be used to define gpio number and the - second denotes the flags for this gpio - -Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for -a general description of GPIO and interrupt bindings. - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -The pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin or a list of pins. This configuration can include the -mux function to select on those pin(s), and various pin configuration -parameters, as listed below. - - -SUBNODES: - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Each subnode only affects those parameters that are explicitly listed. In -other words, a subnode that lists a mux function but no pin configuration -parameters implies no information about any pin configuration parameters. -Similarly, a pin subnode that describes a pullup parameter implies no -information about e.g. the mux function. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pin configuration subnode: - -- pins: - Usage: required - Value type: <string-array> - Definition: List of gpio pins affected by the properties specified in - this subnode. Valid pins are: - gpio1-gpio4 for pm8005 - gpio1-gpio6 for pm8018 - gpio1-gpio12 for pm8038 - gpio1-gpio40 for pm8058 - gpio1-gpio4 for pm8916 - gpio1-gpio38 for pm8917 - gpio1-gpio44 for pm8921 - gpio1-gpio36 for pm8941 - gpio1-gpio8 for pm8950 (hole on gpio3) - gpio1-gpio22 for pm8994 - gpio1-gpio26 for pm8998 - gpio1-gpio22 for pma8084 - gpio1-gpio2 for pmi8950 - gpio1-gpio10 for pmi8994 - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 and gpio10) - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, gpio7 - and gpio8) - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) - gpio1-gpio12 for pm8150l (hole on gpio7) - gpio1-gpio10 for pm8350 - gpio1-gpio8 for pm8350b - gpio1-gpio9 for pm8350c - gpio1-gpio4 for pmk8350 - gpio1-gpio10 for pm7325 - gpio1-gpio4 for pmr735a - gpio1-gpio4 for pmr735b - gpio1-gpio10 for pm6150 - gpio1-gpio12 for pm6150l - gpio1-gpio2 for pm8008 - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 - and gpio11) - -- function: - Usage: required - Value type: <string> - Definition: Specify the alternative function to be configured for the - specified pins. Valid values are: - "normal", - "paired", - "func1", - "func2", - "dtest1", - "dtest2", - "dtest3", - "dtest4", - And following values are supported by LV/MV GPIO subtypes: - "func3", - "func4" - -- bias-disable: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as no pull. - -- bias-pull-down: - Usage: optional - Value type: <none> - Definition: The specified pins should be configured as pull down. - -- bias-pull-up: - Usage: optional - Value type: <empty> - Definition: The specified pins should be configured as pull up. - -- qcom,pull-up-strength: - Usage: optional - Value type: <u32> - Definition: Specifies the strength to use for pull up, if selected. - Valid values are; as defined in - <dt-bindings/pinctrl/qcom,pmic-gpio.h>: - 1: 30uA (PMIC_GPIO_PULL_UP_30) - 2: 1.5uA (PMIC_GPIO_PULL_UP_1P5) - 3: 31.5uA (PMIC_GPIO_PULL_UP_31P5) - 4: 1.5uA + 30uA boost (PMIC_GPIO_PULL_UP_1P5_30) - If this property is omitted 30uA strength will be used if - pull up is selected - -- bias-high-impedance: - Usage: optional - Value type: <none> - Definition: The specified pins will put in high-Z mode and disabled. - -- input-enable: - Usage: optional - Value type: <none> - Definition: The specified pins are put in input mode. - -- output-high: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - high. - -- output-low: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in output mode, driven - low. - -- power-source: - Usage: optional - Value type: <u32> - Definition: Selects the power source for the specified pins. Valid - power sources are defined per chip in - <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -- qcom,drive-strength: - Usage: optional - Value type: <u32> - Definition: Selects the drive strength for the specified pins. Value - drive strengths are: - 0: no (PMIC_GPIO_STRENGTH_NO) - 1: high (PMIC_GPIO_STRENGTH_HIGH) 0.9mA @ 1.8V - 1.9mA @ 2.6V - 2: medium (PMIC_GPIO_STRENGTH_MED) 0.6mA @ 1.8V - 1.25mA @ 2.6V - 3: low (PMIC_GPIO_STRENGTH_LOW) 0.15mA @ 1.8V - 0.3mA @ 2.6V - as defined in <dt-bindings/pinctrl/qcom,pmic-gpio.h> - -- drive-push-pull: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in push-pull mode. - -- drive-open-drain: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in open-drain mode. - -- drive-open-source: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in open-source mode. - -- qcom,analog-pass: - Usage: optional - Value type: <none> - Definition: The specified pins are configured in analog-pass-through mode. - -- qcom,atest: - Usage: optional - Value type: <u32> - Definition: Selects ATEST rail to route to GPIO when it's configured - in analog-pass-through mode. - Valid values are 1-4 corresponding to ATEST1 to ATEST4. - -- qcom,dtest-buffer: - Usage: optional - Value type: <u32> - Definition: Selects DTEST rail to route to GPIO when it's configured - as digital input. - Valid values are 1-4 corresponding to DTEST1 to DTEST4. - -Example: - - pm8921_gpio: gpio@150 { - compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; - reg = <0x150 0x160>; - interrupts = <192 1>, <193 1>, <194 1>, - <195 1>, <196 1>, <197 1>, - <198 1>, <199 1>, <200 1>, - <201 1>, <202 1>, <203 1>, - <204 1>, <205 1>, <206 1>, - <207 1>, <208 1>, <209 1>, - <210 1>, <211 1>, <212 1>, - <213 1>, <214 1>, <215 1>, - <216 1>, <217 1>, <218 1>, - <219 1>, <220 1>, <221 1>, - <222 1>, <223 1>, <224 1>, - <225 1>, <226 1>, <227 1>, - <228 1>, <229 1>, <230 1>, - <231 1>, <232 1>, <233 1>, - <234 1>, <235 1>; - - gpio-controller; - #gpio-cells = <2>; - - pm8921_gpio_keys: gpio-keys { - volume-keys { - pins = "gpio20", "gpio21"; - function = "normal"; - - input-enable; - bias-pull-up; - drive-push-pull; - qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; - power-source = <PM8921_GPIO_S4>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml new file mode 100644 index 000000000000..9bd01db37dcd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -0,0 +1,239 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC GPIO block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the GPIO block(s) found in the 8xxx series of + PMIC's from Qualcomm. + +properties: + compatible: + items: + - enum: + - qcom,pm660-gpio + - qcom,pm660l-gpio + - qcom,pm6150-gpio + - qcom,pm6150l-gpio + - qcom,pm7325-gpio + - qcom,pm8005-gpio + - qcom,pm8008-gpio + - qcom,pm8018-gpio + - qcom,pm8038-gpio + - qcom,pm8058-gpio + - qcom,pm8150-gpio + - qcom,pm8150b-gpio + - qcom,pm8350-gpio + - qcom,pm8350b-gpio + - qcom,pm8350c-gpio + - qcom,pm8916-gpio + - qcom,pm8917-gpio + - qcom,pm8921-gpio + - qcom,pm8941-gpio + - qcom,pm8950-gpio + - qcom,pm8994-gpio + - qcom,pm8998-gpio + - qcom,pma8084-gpio + - qcom,pmi8950-gpio + - qcom,pmi8994-gpio + - qcom,pmi8998-gpio + - qcom,pmk8350-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + - qcom,pms405-gpio + - qcom,pmx55-gpio + + - enum: + - qcom,spmi-gpio + - qcom,ssbi-gpio + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + '#gpio-cells': + const: 2 + description: + The first cell will be used to define gpio number and the + second denotes the flags for this gpio + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupt-controller + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-pmic-gpio-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-pmic-gpio-state" + +$defs: + qcom-pmic-gpio-state: + type: object + allOf: + - $ref: "pinmux-node.yaml" + - $ref: "pincfg-node.yaml" + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. Valid pins are + - gpio1-gpio10 for pm6150 + - gpio1-gpio12 for pm6150l + - gpio1-gpio10 for pm7325 + - gpio1-gpio4 for pm8005 + - gpio1-gpio2 for pm8008 + - gpio1-gpio6 for pm8018 + - gpio1-gpio12 for pm8038 + - gpio1-gpio40 for pm8058 + - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, + gpio7 and gpio8) + - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4 + and gpio7) + - gpio1-gpio12 for pm8150l (hole on gpio7) + - gpio1-gpio4 for pm8916 + - gpio1-gpio10 for pm8350 + - gpio1-gpio8 for pm8350b + - gpio1-gpio9 for pm8350c + - gpio1-gpio38 for pm8917 + - gpio1-gpio44 for pm8921 + - gpio1-gpio36 for pm8941 + - gpio1-gpio8 for pm8950 (hole on gpio3) + - gpio1-gpio22 for pm8994 + - gpio1-gpio26 for pm8998 + - gpio1-gpio22 for pma8084 + - gpio1-gpio2 for pmi8950 + - gpio1-gpio10 for pmi8994 + - gpio1-gpio4 for pmk8350 + - gpio1-gpio4 for pmr735a + - gpio1-gpio4 for pmr735b + - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 + and gpio10) + - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 + and gpio11) + + items: + pattern: "^gpio([0-9]+)$" + + function: + items: + - enum: + - normal + - paired + - func1 + - func2 + - dtest1 + - dtest2 + - dtest3 + - dtest4 + - func3 # supported by LV/MV GPIO subtypes + - func4 # supported by LV/MV GPIO subtypes + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + + qcom,pull-up-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the strength to use for pull up, if selected. + Valid values are defined in + <dt-bindings/pinctrl/qcom,pmic-gpio.h> + If this property is omitted 30uA strength will be used + if pull up is selected + enum: [0, 1, 2, 3] + + bias-high-impedance: true + input-enable: true + output-high: true + output-low: true + power-source: true + + qcom,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the drive strength for the specified pins + Valid drive strength values are defined in + <dt-bindings/pinctrl/qcom,pmic-gpio.h> + enum: [0, 1, 2, 3] + + drive-push-pull: true + drive-open-drain: true + drive-open-source: true + + qcom,analog-pass: + $ref: /schemas/types.yaml#/definitions/flag + description: + The specified pins are configured in + analog-pass-through mode. + + qcom,atest: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects ATEST rail to route to GPIO when it's + configured in analog-pass-through mode. + enum: [1, 2, 3, 4] + + qcom,dtest-buffer: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects DTEST rail to route to GPIO when it's + configured as digital input. + enum: [1, 2, 3, 4] + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + + pm8921_gpio: gpio@150 { + compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; + reg = <0x150 0x160>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + pm8921_gpio_keys: gpio-keys-state { + volume-keys { + pins = "gpio20", "gpio21"; + function = "normal"; + + input-enable; + bias-pull-up; + drive-push-pull; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml new file mode 100644 index 000000000000..8fc06f6a3ef4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-pinctrl.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block + +maintainers: + - Iskren Chernev <iskren.chernev@gmail.com> + +description: + This binding describes the Top Level Mode Multiplexer block found in the + SM4250/6115 platforms. + +properties: + compatible: + const: qcom,sm6115-tlmm + + reg: + minItems: 3 + maxItems: 3 + + reg-names: + items: + - const: west + - const: south + - const: east + + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + + wakeup-parent: + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm6115-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm6115-tlmm-state" + +'$defs': + qcom-sm6115-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$" + - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, + sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c, + cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0, + ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio, + gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist, + mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte, + m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag, + pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti, + qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb, + sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger, + wlan1_adc0, elan1_adc1 ] + + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + required: + - pins + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + tlmm: pinctrl@500000 { + compatible = "qcom,sm6115-tlmm"; + reg = <0x500000 0x400000>, + <0x900000 0x400000>, + <0xd00000 0x400000>; + reg-names = "west", "south", "east"; + interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 114>; + + sdc2_on_state: sdc2-on-state { + clk { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + sd-cd { + pins = "gpio88"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml new file mode 100644 index 000000000000..ef68dabcf4dc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L combined Pin and GPIO controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@glider.be> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> + +description: + The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO + controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 8 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + enum: + - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the + second cell represents consumer flag as mentioned in ../gpio/gpio.txt + E.g. "RZG2L_GPIO(39, 1)" for P39_1. + + gpio-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + items: + - description: GPIO_RSTN signal + - description: GPIO_PORT_RESETN signal + - description: GPIO_SPARE_RESETN signal + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + phandle: true + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZG2L_PORT_PINMUX() + helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>. + pins: true + drive-strength: + enum: [ 2, 4, 8, 12 ] + power-source: + enum: [ 1800, 2500, 3300 ] + slew-rate: true + gpio-hog: true + gpios: true + input-enable: true + output-high: true + output-low: true + line-name: true + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - clocks + - power-domains + - resets + +examples: + - | + #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + #include <dt-bindings/clock/r9a07g044-cpg.h> + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g044-pinctrl"; + reg = <0x11030000 0x10000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; + resets = <&cpg R9A07G044_GPIO_RSTN>, + <&cpg R9A07G044_GPIO_PORT_RESETN>, + <&cpg R9A07G044_GPIO_SPARE_RESETN>; + power-domains = <&cpg>; + + scif0_pins: serial0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */ + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) 0>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ + <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ + power-source = <3300>; + }; + + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 38a1416fd2cd..e7a1b1880375 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -22,6 +22,7 @@ Required Properties: - "samsung,exynos5420-pinctrl": for Exynos5420 compatible pin-controller. - "samsung,exynos5433-pinctrl": for Exynos5433 compatible pin-controller. - "samsung,exynos7-pinctrl": for Exynos7 compatible pin-controller. + - "samsung,exynos850-pinctrl": for Exynos850 compatible pin-controller. - reg: Base address of the pin controller hardware module and length of the address space it occupies. diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml index 72877544ca78..dfee6d38a701 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml @@ -24,6 +24,7 @@ properties: - st,stm32f746-pinctrl - st,stm32f769-pinctrl - st,stm32h743-pinctrl + - st,stm32mp135-pinctrl - st,stm32mp157-pinctrl - st,stm32mp157-z-pinctrl diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt deleted file mode 100644 index f488b0f77406..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt +++ /dev/null @@ -1,105 +0,0 @@ - Binding for Xilinx Zynq Pinctrl - -Required properties: -- compatible: "xlnx,zynq-pinctrl" -- syscon: phandle to SLCR -- reg: Offset and length of pinctrl space in SLCR - -Please refer to pinctrl-bindings.txt in this directory for details of the -common pinctrl bindings used by client devices, including the meaning of the -phrase "pin configuration node". - -Zynq's pin configuration nodes act as a container for an arbitrary number of -subnodes. Each of these subnodes represents some desired configuration for a -pin, a group, or a list of pins or groups. This configuration can include the -mux function to select on those pin(s)/group(s), and various pin configuration -parameters, such as pull-up, slew rate, etc. - -Each configuration node can consist of multiple nodes describing the pinmux and -pinconf options. Those nodes can be pinmux nodes or pinconf nodes. - -The name of each subnode is not important; all subnodes should be enumerated -and processed purely based on their content. - -Required properties for pinmux nodes are: - - groups: A list of pinmux groups. - - function: The name of a pinmux function to activate for the specified set - of groups. - -Required properties for configuration nodes: -One of: - - pins: a list of pin names - - groups: A list of pinmux groups. - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinmux subnode: - groups, function - -The following generic properties as defined in pinctrl-bindings.txt are valid -to specify in a pinconf subnode: - groups, pins, bias-disable, bias-high-impedance, bias-pull-up, slew-rate, - low-power-disable, low-power-enable - - Valid arguments for 'slew-rate' are '0' and '1' to select between slow and fast - respectively. - - Valid values for groups are: - ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, mdio1_0_grp, - qspi0_0_grp, qspi1_0_grp, qspi_fbclk, qspi_cs1_grp, spi0_0_grp - spi0_2_grp, - spi0_X_ssY (X=0..2, Y=0..2), spi1_0_grp - spi1_3_grp, - spi1_X_ssY (X=0..3, Y=0..2), sdio0_0_grp - sdio0_2_grp, - sdio1_0_grp - sdio1_3_grp, sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, - sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, smc0_nor_addr25_grp, smc0_nand, - can0_0_grp - can0_10_grp, can1_0_grp - can1_11_grp, uart0_0_grp - uart0_10_grp, - uart1_0_grp - uart1_11_grp, i2c0_0_grp - i2c0_10_grp, i2c1_0_grp - i2c1_10_grp, - ttc0_0_grp - ttc0_2_grp, ttc1_0_grp - ttc1_2_grp, swdt0_0_grp - swdt0_4_grp, - gpio0_0_grp - gpio0_53_grp, usb0_0_grp, usb1_0_grp - - Valid values for pins are: - MIO0 - MIO53 - - Valid values for function are: - ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, qspi_cs1, - spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, sdio0_cd, sdio0_wp, - sdio1, sdio1_pc, sdio1_cd, sdio1_wp, - smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, can1, uart0, uart1, - i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, usb0, usb1 - -The following driver-specific properties as defined here are valid to specify in -a pin configuration subnode: - - io-standard: Configure the pin to use the selected IO standard according to - this mapping: - 1: LVCMOS18 - 2: LVCMOS25 - 3: LVCMOS33 - 4: HSTL - -Example: - pinctrl0: pinctrl@700 { - compatible = "xlnx,pinctrl-zynq"; - reg = <0x700 0x200>; - syscon = <&slcr>; - - pinctrl_uart1_default: uart1-default { - mux { - groups = "uart1_10_grp"; - function = "uart1"; - }; - - conf { - groups = "uart1_10_grp"; - slew-rate = <0>; - io-standard = <1>; - }; - - conf-rx { - pins = "MIO49"; - bias-high-impedance; - }; - - conf-tx { - pins = "MIO48"; - bias-disable; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml new file mode 100644 index 000000000000..ac97dbf6998e --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.yaml @@ -0,0 +1,214 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/xlnx,zynq-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Zynq Pinctrl + +maintainers: + - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + Zynq's pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, slew rate, etc. + + Each configuration node can consist of multiple nodes describing the pinmux and + pinconf options. Those nodes can be pinmux nodes or pinconf nodes. + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + +properties: + compatible: + const: xlnx,zynq-pinctrl + + reg: + description: Specifies the base address and size of the SLCR space. + maxItems: 1 + + syscon: + description: + phandle to the SLCR. + +patternProperties: + '^(.*-)?(default|gpio)$': + type: object + patternProperties: + '^mux': + type: object + description: + Pinctrl node's client devices use subnodes for pin muxes, + which in turn use below standard properties. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of groups to select (either this or "pins" must be + specified), available groups for this subnode. + items: + enum: [ethernet0_0_grp, ethernet1_0_grp, mdio0_0_grp, + mdio1_0_grp, qspi0_0_grp, qspi1_0_grp, qspi_fbclk, + qspi_cs1_grp, spi0_0_grp, spi0_1_grp, spi0_2_grp, + spi0_0_ss0, spi0_0_ss1, spi0_0_ss2, spi0_1_ss0, + spi0_1_ss1, spi0_1_ss2, spi0_2_ss0, spi0_2_ss1, + spi0_2_ss2, spi1_0_grp, spi1_1_grp, spi1_2_grp, + spi1_3_grp, spi1_0_ss0, spi1_0_ss1, spi1_0_ss2, + spi1_1_ss0, spi1_1_ss1, spi1_1_ss2, spi1_2_ss0, + spi1_2_ss1, spi1_2_ss2, spi1_3_ss0, spi1_3_ss1, + spi1_3_ss2, sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, sdio1_3_grp, + sdio0_emio_wp, sdio0_emio_cd, sdio1_emio_wp, + sdio1_emio_cd, smc0_nor, smc0_nor_cs1_grp, + smc0_nor_addr25_grp, smc0_nand, can0_0_grp, can0_1_grp, + can0_2_grp, can0_3_grp, can0_4_grp, can0_5_grp, + can0_6_grp, can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, can1_6_grp, + can1_7_grp, can1_8_grp, can1_9_grp, can1_10_grp, + can1_11_grp, uart0_0_grp, uart0_1_grp, uart0_2_grp, + uart0_3_grp, uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, uart0_10_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, uart1_3_grp, + uart1_4_grp, uart1_5_grp, uart1_6_grp, uart1_7_grp, + uart1_8_grp, uart1_9_grp, uart1_10_grp, uart1_11_grp, + i2c0_0_grp, i2c0_1_grp, i2c0_2_grp, i2c0_3_grp, + i2c0_4_grp, i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, i2c1_4_grp, + i2c1_5_grp, i2c1_6_grp, i2c1_7_grp, i2c1_8_grp, + i2c1_9_grp, i2c1_10_grp, ttc0_0_grp, ttc0_1_grp, + ttc0_2_grp, ttc1_0_grp, ttc1_1_grp, ttc1_2_grp, + swdt0_0_grp, swdt0_1_grp, swdt0_2_grp, swdt0_3_grp, + swdt0_4_grp, gpio0_0_grp, gpio0_1_grp, gpio0_2_grp, + gpio0_3_grp, gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, gpio0_10_grp, + gpio0_11_grp, gpio0_12_grp, gpio0_13_grp, gpio0_14_grp, + gpio0_15_grp, gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, gpio0_22_grp, + gpio0_23_grp, gpio0_24_grp, gpio0_25_grp, gpio0_26_grp, + gpio0_27_grp, gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, gpio0_34_grp, + gpio0_35_grp, gpio0_36_grp, gpio0_37_grp, gpio0_38_grp, + gpio0_39_grp, gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, gpio0_46_grp, + gpio0_47_grp, gpio0_48_grp, gpio0_49_grp, gpio0_50_grp, + gpio0_51_grp, gpio0_52_grp, gpio0_53_grp, usb0_0_grp, + usb1_0_grp] + maxItems: 54 + + function: + description: + Specify the alternative function to be configured for the + given pin groups. + enum: [ethernet0, ethernet1, mdio0, mdio1, qspi0, qspi1, qspi_fbclk, + qspi_cs1, spi0, spi0_ss, spi1, spi1_ss, sdio0, sdio0_pc, + sdio0_cd, sdio0_wp, sdio1, sdio1_pc, sdio1_cd, sdio1_wp, + smc0_nor, smc0_nor_cs1, smc0_nor_addr25, smc0_nand, can0, + can1, uart0, uart1, i2c0, i2c1, ttc0, ttc1, swdt0, gpio0, + usb0, usb1] + + required: + - groups + - function + + additionalProperties: false + + '^conf': + type: object + description: + Pinctrl node's client devices use subnodes for pin configurations, + which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of pin groups as mentioned above. + + pins: + description: + List of pin names to select in this subnode. + items: + pattern: '^MIO([0-9]|[1-4][0-9]|5[0-3])$' + maxItems: 54 + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + + bias-high-impedance: true + + low-power-enable: true + + low-power-disable: true + + slew-rate: + enum: [0, 1] + + power-source: + enum: [1, 2, 3, 4] + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-zynq.h> + pinctrl0: pinctrl@700 { + compatible = "xlnx,zynq-pinctrl"; + reg = <0x700 0x200>; + syscon = <&slcr>; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart1_10_grp"; + function = "uart1"; + }; + + conf { + groups = "uart1_10_grp"; + slew-rate = <0>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO49"; + bias-high-impedance; + }; + + conf-tx { + pins = "MIO48"; + bias-disable; + }; + }; + }; + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 8ef33ef01f0b..ad456ca8f740 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14727,6 +14727,12 @@ F: Documentation/driver-api/pin-control.rst F: drivers/pinctrl/ F: include/linux/pinctrl/ +PIN CONTROLLER - AMD +M: Basavaraj Natikar <Basavaraj.Natikar@amd.com> +M: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> +S: Maintained +F: drivers/pinctrl/pinctrl-amd.c + PIN CONTROLLER - FREESCALE M: Dong Aisheng <aisheng.dong@nxp.com> M: Fabio Estevam <festevam@gmail.com> @@ -14745,12 +14751,19 @@ S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git F: drivers/pinctrl/intel/ +PIN CONTROLLER - KEEMBAY +M: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com> +S: Supported +F: drivers/pinctrl/pinctrl-keembay* + PIN CONTROLLER - MEDIATEK M: Sean Wang <sean.wang@kernel.org> L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt -F: Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt +F: Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml +F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml F: drivers/pinctrl/mediatek/ PIN CONTROLLER - MICROCHIP AT91 diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 0e4e835026db..a031b3636318 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -9,7 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/mt8135-resets.h> -#include "mt8135-pinfunc.h" +#include <dt-bindings/pinctrl/mt8135-pinfunc.h> / { #address-cells = <2>; diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index dfb2fbf5a414..409cf827970c 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -14,7 +14,7 @@ #include <dt-bindings/reset-controller/mt8183-resets.h> #include <dt-bindings/phy/phy.h> #include <dt-bindings/thermal/thermal.h> -#include "mt8183-pinfunc.h" +#include <dt-bindings/pinctrl/mt8183-pinfunc.h> / { compatible = "mediatek,mt8183"; diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index f38f12801f18..31921108e456 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -248,12 +248,15 @@ config PINCTRL_SX150X - 16 bits: sx1509q, sx1506q config PINCTRL_PISTACHIO - def_bool y if MACH_PISTACHIO + bool "IMG Pistachio SoC pinctrl driver" + depends on OF && (MIPS || COMPILE_TEST) depends on GPIOLIB select PINMUX select GENERIC_PINCONF select GPIOLIB_IRQCHIP select OF_GPIO + help + This support pinctrl and gpio driver for IMG Pistachio SoC. config PINCTRL_ST bool @@ -404,6 +407,25 @@ config PINCTRL_K210 Add support for the Canaan Kendryte K210 RISC-V SOC Field Programmable IO Array (FPIOA) controller. +config PINCTRL_KEEMBAY + tristate "Pinctrl driver for Intel Keem Bay SoC" + depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST) + depends on HAS_IOMEM + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GPIOLIB + select GPIOLIB_IRQCHIP + select GPIO_GENERIC + help + This selects pin control driver for the Intel Keembay SoC. + It provides pin config functions such as pullup, pulldown, + interrupt, drive strength, sec lock, schmitt trigger, slew + rate control and direction control. This module will be + called as pinctrl-keembay. + source "drivers/pinctrl/actions/Kconfig" source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 5ef5334a797f..200073bcc2c1 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_PINCTRL_OCELOT) += pinctrl-ocelot.o obj-$(CONFIG_PINCTRL_MICROCHIP_SGPIO) += pinctrl-microchip-sgpio.o obj-$(CONFIG_PINCTRL_EQUILIBRIUM) += pinctrl-equilibrium.o obj-$(CONFIG_PINCTRL_K210) += pinctrl-k210.o +obj-$(CONFIG_PINCTRL_KEEMBAY) += pinctrl-keembay.o obj-y += actions/ obj-$(CONFIG_ARCH_ASPEED) += aspeed/ diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed.c b/drivers/pinctrl/aspeed/pinctrl-aspeed.c index 9bbfe5c14b36..c94e24aadf92 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed.c @@ -133,8 +133,8 @@ static int aspeed_disable_sig(struct aspeed_pinmux_data *ctx, } /** - * Search for the signal expression needed to enable the pin's signal for the - * requested function. + * aspeed_find_expr_by_name - Search for the signal expression needed to + * enable the pin's signal for the requested function. * * @exprs: List of signal expressions (haystack) * @name: The name of the requested function (needle) diff --git a/drivers/pinctrl/aspeed/pinmux-aspeed.c b/drivers/pinctrl/aspeed/pinmux-aspeed.c index 894e2efd3be7..4aa46383c2c5 100644 --- a/drivers/pinctrl/aspeed/pinmux-aspeed.c +++ b/drivers/pinctrl/aspeed/pinmux-aspeed.c @@ -59,7 +59,8 @@ int aspeed_sig_desc_eval(const struct aspeed_sig_desc *desc, } /** - * Query the enabled or disabled state for a mux function's signal on a pin + * aspeed_sig_expr_eval - Query the enabled or disabled state for a + * mux function's signal on a pin * * @ctx: The driver context for the pinctrl IP * @expr: An expression controlling the signal for a mux function on a pin diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c index 8b34d2c308c7..6e6fefeb21ea 100644 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c @@ -416,8 +416,7 @@ static void bcm2835_gpio_irq_handler(struct irq_desc *desc) } } /* This should not happen, every IRQ has a bank */ - if (i == BCM2835_NUM_IRQS) - BUG(); + BUG_ON(i == BCM2835_NUM_IRQS); chained_irq_enter(host_chip, desc); diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig index f294336430cc..21fa21c6547b 100644 --- a/drivers/pinctrl/freescale/Kconfig +++ b/drivers/pinctrl/freescale/Kconfig @@ -166,6 +166,13 @@ config PINCTRL_IMX8DXL help Say Y here to enable the imx8dxl pinctrl driver +config PINCTRL_IMX8ULP + tristate "IMX8ULP pinctrl driver" + depends on ARCH_MXC + select PINCTRL_IMX + help + Say Y here to enable the imx8ulp pinctrl driver + config PINCTRL_VF610 bool "Freescale Vybrid VF610 pinctrl driver" depends on SOC_VF610 diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile index e476cb671037..c44930b1b362 100644 --- a/drivers/pinctrl/freescale/Makefile +++ b/drivers/pinctrl/freescale/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_PINCTRL_IMX8MQ) += pinctrl-imx8mq.o obj-$(CONFIG_PINCTRL_IMX8QM) += pinctrl-imx8qm.o obj-$(CONFIG_PINCTRL_IMX8QXP) += pinctrl-imx8qxp.o obj-$(CONFIG_PINCTRL_IMX8DXL) += pinctrl-imx8dxl.o +obj-$(CONFIG_PINCTRL_IMX8ULP) += pinctrl-imx8ulp.o obj-$(CONFIG_PINCTRL_VF610) += pinctrl-vf610.o obj-$(CONFIG_PINCTRL_MXS) += pinctrl-mxs.o obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o diff --git a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c index 041455c13d0d..f947b1d0d1aa 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx8dxl.c +++ b/drivers/pinctrl/freescale/pinctrl-imx8dxl.c @@ -155,7 +155,7 @@ static const struct pinctrl_pin_desc imx8dxl_pinctrl_pads[] = { }; -static struct imx_pinctrl_soc_info imx8dxl_pinctrl_info = { +static const struct imx_pinctrl_soc_info imx8dxl_pinctrl_info = { .pins = imx8dxl_pinctrl_pads, .npins = ARRAY_SIZE(imx8dxl_pinctrl_pads), .flags = IMX_USE_SCU, diff --git a/drivers/pinctrl/freescale/pinctrl-imx8mn.c b/drivers/pinctrl/freescale/pinctrl-imx8mn.c index 448a79eb4568..dbf89cfba477 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx8mn.c +++ b/drivers/pinctrl/freescale/pinctrl-imx8mn.c @@ -317,7 +317,7 @@ static const struct pinctrl_pin_desc imx8mn_pinctrl_pads[] = { IMX_PINCTRL_PIN(MX8MN_IOMUXC_UART4_TXD), }; -static struct imx_pinctrl_soc_info imx8mn_pinctrl_info = { +static const struct imx_pinctrl_soc_info imx8mn_pinctrl_info = { .pins = imx8mn_pinctrl_pads, .npins = ARRAY_SIZE(imx8mn_pinctrl_pads), .gpr_compatible = "fsl,imx8mn-iomuxc-gpr", diff --git a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c index 4f97813ba8b7..0a0acc0038d0 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx8qxp.c +++ b/drivers/pinctrl/freescale/pinctrl-imx8qxp.c @@ -194,7 +194,7 @@ static const struct pinctrl_pin_desc imx8qxp_pinctrl_pads[] = { IMX_PINCTRL_PIN(IMX8QXP_COMP_CTL_GPIO_1V8_3V3_QSPI0B), }; -static struct imx_pinctrl_soc_info imx8qxp_pinctrl_info = { +static const struct imx_pinctrl_soc_info imx8qxp_pinctrl_info = { .pins = imx8qxp_pinctrl_pads, .npins = ARRAY_SIZE(imx8qxp_pinctrl_pads), .flags = IMX_USE_SCU, diff --git a/drivers/pinctrl/freescale/pinctrl-imx8ulp.c b/drivers/pinctrl/freescale/pinctrl-imx8ulp.c new file mode 100644 index 000000000000..f8572597a54e --- /dev/null +++ b/drivers/pinctrl/freescale/pinctrl-imx8ulp.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 NXP + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-imx.h" + +enum imx8ulp_pads { + IMX8ULP_PAD_PTD0 = 0, + IMX8ULP_PAD_PTD1, + IMX8ULP_PAD_PTD2, + IMX8ULP_PAD_PTD3, + IMX8ULP_PAD_PTD4, + IMX8ULP_PAD_PTD5, + IMX8ULP_PAD_PTD6, + IMX8ULP_PAD_PTD7, + IMX8ULP_PAD_PTD8, + IMX8ULP_PAD_PTD9, + IMX8ULP_PAD_PTD10, + IMX8ULP_PAD_PTD11, + IMX8ULP_PAD_PTD12, + IMX8ULP_PAD_PTD13, + IMX8ULP_PAD_PTD14, + IMX8ULP_PAD_PTD15, + IMX8ULP_PAD_PTD16, + IMX8ULP_PAD_PTD17, + IMX8ULP_PAD_PTD18, + IMX8ULP_PAD_PTD19, + IMX8ULP_PAD_PTD20, + IMX8ULP_PAD_PTD21, + IMX8ULP_PAD_PTD22, + IMX8ULP_PAD_PTD23, + IMX8ULP_PAD_RESERVE0, + IMX8ULP_PAD_RESERVE1, + IMX8ULP_PAD_RESERVE2, + IMX8ULP_PAD_RESERVE3, + IMX8ULP_PAD_RESERVE4, + IMX8ULP_PAD_RESERVE5, + IMX8ULP_PAD_RESERVE6, + IMX8ULP_PAD_RESERVE7, + IMX8ULP_PAD_PTE0, + IMX8ULP_PAD_PTE1, + IMX8ULP_PAD_PTE2, + IMX8ULP_PAD_PTE3, + IMX8ULP_PAD_PTE4, + IMX8ULP_PAD_PTE5, + IMX8ULP_PAD_PTE6, + IMX8ULP_PAD_PTE7, + IMX8ULP_PAD_PTE8, + IMX8ULP_PAD_PTE9, + IMX8ULP_PAD_PTE10, + IMX8ULP_PAD_PTE11, + IMX8ULP_PAD_PTE12, + IMX8ULP_PAD_PTE13, + IMX8ULP_PAD_PTE14, + IMX8ULP_PAD_PTE15, + IMX8ULP_PAD_PTE16, + IMX8ULP_PAD_PTE17, + IMX8ULP_PAD_PTE18, + IMX8ULP_PAD_PTE19, + IMX8ULP_PAD_PTE20, + IMX8ULP_PAD_PTE21, + IMX8ULP_PAD_PTE22, + IMX8ULP_PAD_PTE23, + IMX8ULP_PAD_RESERVE8, + IMX8ULP_PAD_RESERVE9, + IMX8ULP_PAD_RESERVE10, + IMX8ULP_PAD_RESERVE11, + IMX8ULP_PAD_RESERVE12, + IMX8ULP_PAD_RESERVE13, + IMX8ULP_PAD_RESERVE14, + IMX8ULP_PAD_RESERVE15, + IMX8ULP_PAD_PTF0, + IMX8ULP_PAD_PTF1, + IMX8ULP_PAD_PTF2, + IMX8ULP_PAD_PTF3, + IMX8ULP_PAD_PTF4, + IMX8ULP_PAD_PTF5, + IMX8ULP_PAD_PTF6, + IMX8ULP_PAD_PTF7, + IMX8ULP_PAD_PTF8, + IMX8ULP_PAD_PTF9, + IMX8ULP_PAD_PTF10, + IMX8ULP_PAD_PTF11, + IMX8ULP_PAD_PTF12, + IMX8ULP_PAD_PTF13, + IMX8ULP_PAD_PTF14, + IMX8ULP_PAD_PTF15, + IMX8ULP_PAD_PTF16, + IMX8ULP_PAD_PTF17, + IMX8ULP_PAD_PTF18, + IMX8ULP_PAD_PTF19, + IMX8ULP_PAD_PTF20, + IMX8ULP_PAD_PTF21, + IMX8ULP_PAD_PTF22, + IMX8ULP_PAD_PTF23, + IMX8ULP_PAD_PTF24, + IMX8ULP_PAD_PTF25, + IMX8ULP_PAD_PTF26, + IMX8ULP_PAD_PTF27, + IMX8ULP_PAD_PTF28, + IMX8ULP_PAD_PTF29, + IMX8ULP_PAD_PTF30, + IMX8ULP_PAD_PTF31, +}; + +/* Pad names for the pinmux subsystem */ +static const struct pinctrl_pin_desc imx8ulp_pinctrl_pads[] = { + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD0), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD1), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD2), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD3), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD4), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD5), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD6), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD7), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD8), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD9), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD10), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD11), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD12), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD13), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD14), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD15), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD16), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD17), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD18), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD19), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD20), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD21), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD22), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTD23), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE0), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE1), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE2), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE3), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE4), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE5), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE6), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE7), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE0), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE1), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE2), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE3), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE4), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE5), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE6), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE7), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE8), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE9), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE10), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE11), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE12), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE13), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE14), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE15), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE16), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE17), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE18), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE19), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE20), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE21), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE22), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTE23), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE8), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE9), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE10), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE11), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE12), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE13), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE14), + IMX_PINCTRL_PIN(IMX8ULP_PAD_RESERVE15), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF0), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF1), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF2), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF3), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF4), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF5), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF6), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF7), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF8), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF9), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF10), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF11), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF12), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF13), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF14), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF15), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF16), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF17), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF18), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF19), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF20), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF21), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF22), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF23), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF24), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF25), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF26), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF27), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF28), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF29), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF30), + IMX_PINCTRL_PIN(IMX8ULP_PAD_PTF31), +}; + +#define BM_OBE_ENABLED BIT(17) +#define BM_IBE_ENABLED BIT(16) +#define BM_MUX_MODE 0xf00 +#define BP_MUX_MODE 8 + +static int imx8ulp_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, bool input) +{ + struct imx_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); + const struct imx_pin_reg *pin_reg; + u32 reg; + + pin_reg = &ipctl->pin_regs[offset]; + if (pin_reg->mux_reg == -1) + return -EINVAL; + + reg = readl(ipctl->base + pin_reg->mux_reg); + if (input) + reg = (reg & ~BM_OBE_ENABLED) | BM_IBE_ENABLED; + else + reg = (reg & ~BM_IBE_ENABLED) | BM_OBE_ENABLED; + writel(reg, ipctl->base + pin_reg->mux_reg); + + return 0; +} + +static const struct imx_pinctrl_soc_info imx8ulp_pinctrl_info = { + .pins = imx8ulp_pinctrl_pads, + .npins = ARRAY_SIZE(imx8ulp_pinctrl_pads), + .flags = ZERO_OFFSET_VALID | SHARE_MUX_CONF_REG, + .gpio_set_direction = imx8ulp_pmx_gpio_set_direction, + .mux_mask = BM_MUX_MODE, + .mux_shift = BP_MUX_MODE, +}; + +static const struct of_device_id imx8ulp_pinctrl_of_match[] = { + { .compatible = "fsl,imx8ulp-iomuxc1", }, + { /* sentinel */ } +}; + +static int imx8ulp_pinctrl_probe(struct platform_device *pdev) +{ + return imx_pinctrl_probe(pdev, &imx8ulp_pinctrl_info); +} + +static struct platform_driver imx8ulp_pinctrl_driver = { + .driver = { + .name = "imx8ulp-pinctrl", + .of_match_table = imx8ulp_pinctrl_of_match, + .suppress_bind_attrs = true, + }, + .probe = imx8ulp_pinctrl_probe, +}; + +static int __init imx8ulp_pinctrl_init(void) +{ + return platform_driver_register(&imx8ulp_pinctrl_driver); +} +arch_initcall(imx8ulp_pinctrl_init); + +MODULE_AUTHOR("Jacky Bai <ping.bai@nxp.com>"); +MODULE_DESCRIPTION("NXP i.MX8ULP pinctrl driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8365.c b/drivers/pinctrl/mediatek/pinctrl-mt8365.c index 22c33c3cb581..79b1fee5a1eb 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt8365.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt8365.c @@ -485,7 +485,6 @@ static struct platform_driver mtk_pinctrl_driver = { .probe = mtk_pinctrl_probe, .driver = { .name = "mediatek-mt8365-pinctrl", - .owner = THIS_MODULE, .of_match_table = mt8365_pctrl_match, .pm = &mtk_eint_pm_ops, }, diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c index 5a68e242f6b3..5cb018f98800 100644 --- a/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c +++ b/drivers/pinctrl/mvebu/pinctrl-armada-37xx.c @@ -167,10 +167,14 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = { PIN_GRP_GPIO("jtag", 20, 5, BIT(0), "jtag"), PIN_GRP_GPIO("sdio0", 8, 3, BIT(1), "sdio"), PIN_GRP_GPIO("emmc_nb", 27, 9, BIT(2), "emmc"), - PIN_GRP_GPIO("pwm0", 11, 1, BIT(3), "pwm"), - PIN_GRP_GPIO("pwm1", 12, 1, BIT(4), "pwm"), - PIN_GRP_GPIO("pwm2", 13, 1, BIT(5), "pwm"), - PIN_GRP_GPIO("pwm3", 14, 1, BIT(6), "pwm"), + PIN_GRP_GPIO_3("pwm0", 11, 1, BIT(3) | BIT(20), 0, BIT(20), BIT(3), + "pwm", "led"), + PIN_GRP_GPIO_3("pwm1", 12, 1, BIT(4) | BIT(21), 0, BIT(21), BIT(4), + "pwm", "led"), + PIN_GRP_GPIO_3("pwm2", 13, 1, BIT(5) | BIT(22), 0, BIT(22), BIT(5), + "pwm", "led"), + PIN_GRP_GPIO_3("pwm3", 14, 1, BIT(6) | BIT(23), 0, BIT(23), BIT(6), + "pwm", "led"), PIN_GRP_GPIO("pmic1", 7, 1, BIT(7), "pmic"), PIN_GRP_GPIO("pmic0", 6, 1, BIT(8), "pmic"), PIN_GRP_GPIO("i2c2", 2, 2, BIT(9), "i2c"), @@ -184,10 +188,6 @@ static struct armada_37xx_pin_group armada_37xx_nb_groups[] = { PIN_GRP_EXTRA("uart2", 9, 2, BIT(1) | BIT(13) | BIT(14) | BIT(19), BIT(1) | BIT(13) | BIT(14), BIT(1) | BIT(19), 18, 2, "gpio", "uart"), - PIN_GRP_GPIO_2("led0_od", 11, 1, BIT(20), BIT(20), 0, "led"), - PIN_GRP_GPIO_2("led1_od", 12, 1, BIT(21), BIT(21), 0, "led"), - PIN_GRP_GPIO_2("led2_od", 13, 1, BIT(22), BIT(22), 0, "led"), - PIN_GRP_GPIO_2("led3_od", 14, 1, BIT(23), BIT(23), 0, "led"), }; static struct armada_37xx_pin_group armada_37xx_sb_groups[] = { diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c index ce9cc719c395..2712f51eb238 100644 --- a/drivers/pinctrl/pinctrl-ingenic.c +++ b/drivers/pinctrl/pinctrl-ingenic.c @@ -104,6 +104,7 @@ enum jz_version { ID_X1500, ID_X1830, ID_X2000, + ID_X2100, }; struct ingenic_chip_info { @@ -589,6 +590,18 @@ static int jz4755_uart0_data_pins[] = { 0x7c, 0x7d, }; static int jz4755_uart0_hwflow_pins[] = { 0x7e, 0x7f, }; static int jz4755_uart1_data_pins[] = { 0x97, 0x99, }; static int jz4755_uart2_data_pins[] = { 0x9f, }; +static int jz4755_ssi_dt_b_pins[] = { 0x3b, }; +static int jz4755_ssi_dt_f_pins[] = { 0xa1, }; +static int jz4755_ssi_dr_b_pins[] = { 0x3c, }; +static int jz4755_ssi_dr_f_pins[] = { 0xa2, }; +static int jz4755_ssi_clk_b_pins[] = { 0x3a, }; +static int jz4755_ssi_clk_f_pins[] = { 0xa0, }; +static int jz4755_ssi_gpc_b_pins[] = { 0x3e, }; +static int jz4755_ssi_gpc_f_pins[] = { 0xa4, }; +static int jz4755_ssi_ce0_b_pins[] = { 0x3d, }; +static int jz4755_ssi_ce0_f_pins[] = { 0xa3, }; +static int jz4755_ssi_ce1_b_pins[] = { 0x3f, }; +static int jz4755_ssi_ce1_f_pins[] = { 0xa5, }; static int jz4755_mmc0_1bit_pins[] = { 0x2f, 0x50, 0x5c, }; static int jz4755_mmc0_4bit_pins[] = { 0x5d, 0x5b, 0x51, }; static int jz4755_mmc1_1bit_pins[] = { 0x3a, 0x3d, 0x3c, }; @@ -630,6 +643,18 @@ static const struct group_desc jz4755_groups[] = { INGENIC_PIN_GROUP("uart0-hwflow", jz4755_uart0_hwflow, 0), INGENIC_PIN_GROUP("uart1-data", jz4755_uart1_data, 0), INGENIC_PIN_GROUP("uart2-data", jz4755_uart2_data, 1), + INGENIC_PIN_GROUP("ssi-dt-b", jz4755_ssi_dt_b, 0), + INGENIC_PIN_GROUP("ssi-dt-f", jz4755_ssi_dt_f, 0), + INGENIC_PIN_GROUP("ssi-dr-b", jz4755_ssi_dr_b, 0), + INGENIC_PIN_GROUP("ssi-dr-f", jz4755_ssi_dr_f, 0), + INGENIC_PIN_GROUP("ssi-clk-b", jz4755_ssi_clk_b, 0), + INGENIC_PIN_GROUP("ssi-clk-f", jz4755_ssi_clk_f, 0), + INGENIC_PIN_GROUP("ssi-gpc-b", jz4755_ssi_gpc_b, 0), + INGENIC_PIN_GROUP("ssi-gpc-f", jz4755_ssi_gpc_f, 0), + INGENIC_PIN_GROUP("ssi-ce0-b", jz4755_ssi_ce0_b, 0), + INGENIC_PIN_GROUP("ssi-ce0-f", jz4755_ssi_ce0_f, 0), + INGENIC_PIN_GROUP("ssi-ce1-b", jz4755_ssi_ce1_b, 0), + INGENIC_PIN_GROUP("ssi-ce1-f", jz4755_ssi_ce1_f, 0), INGENIC_PIN_GROUP_FUNCS("mmc0-1bit", jz4755_mmc0_1bit, jz4755_mmc0_1bit_funcs), INGENIC_PIN_GROUP_FUNCS("mmc0-4bit", jz4755_mmc0_4bit, @@ -661,6 +686,14 @@ static const struct group_desc jz4755_groups[] = { static const char *jz4755_uart0_groups[] = { "uart0-data", "uart0-hwflow", }; static const char *jz4755_uart1_groups[] = { "uart1-data", }; static const char *jz4755_uart2_groups[] = { "uart2-data", }; +static const char *jz4755_ssi_groups[] = { + "ssi-dt-b", "ssi-dt-f", + "ssi-dr-b", "ssi-dr-f", + "ssi-clk-b", "ssi-clk-f", + "ssi-gpc-b", "ssi-gpc-f", + "ssi-ce0-b", "ssi-ce0-f", + "ssi-ce1-b", "ssi-ce1-f", +}; static const char *jz4755_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", }; static const char *jz4755_mmc1_groups[] = { "mmc0-1bit", "mmc0-4bit", }; static const char *jz4755_i2c_groups[] = { "i2c-data", }; @@ -683,6 +716,7 @@ static const struct function_desc jz4755_functions[] = { { "uart0", jz4755_uart0_groups, ARRAY_SIZE(jz4755_uart0_groups), }, { "uart1", jz4755_uart1_groups, ARRAY_SIZE(jz4755_uart1_groups), }, { "uart2", jz4755_uart2_groups, ARRAY_SIZE(jz4755_uart2_groups), }, + { "ssi", jz4755_ssi_groups, ARRAY_SIZE(jz4755_ssi_groups), }, { "mmc0", jz4755_mmc0_groups, ARRAY_SIZE(jz4755_mmc0_groups), }, { "mmc1", jz4755_mmc1_groups, ARRAY_SIZE(jz4755_mmc1_groups), }, { "i2c", jz4755_i2c_groups, ARRAY_SIZE(jz4755_i2c_groups), }, @@ -710,7 +744,7 @@ static const struct ingenic_chip_info jz4755_chip_info = { }; static const u32 jz4760_pull_ups[6] = { - 0xffffffff, 0xfffcf3ff, 0xffffffff, 0xffffcfff, 0xfffffb7c, 0xfffff00f, + 0xffffffff, 0xfffcf3ff, 0xffffffff, 0xffffcfff, 0xfffffb7c, 0x0000000f, }; static const u32 jz4760_pull_downs[6] = { @@ -725,6 +759,58 @@ static int jz4760_uart2_data_pins[] = { 0x5c, 0x5e, }; static int jz4760_uart2_hwflow_pins[] = { 0x5d, 0x5f, }; static int jz4760_uart3_data_pins[] = { 0x6c, 0x85, }; static int jz4760_uart3_hwflow_pins[] = { 0x88, 0x89, }; +static int jz4760_ssi0_dt_a_pins[] = { 0x15, }; +static int jz4760_ssi0_dt_b_pins[] = { 0x35, }; +static int jz4760_ssi0_dt_d_pins[] = { 0x75, }; +static int jz4760_ssi0_dt_e_pins[] = { 0x91, }; +static int jz4760_ssi0_dr_a_pins[] = { 0x14, }; +static int jz4760_ssi0_dr_b_pins[] = { 0x34, }; +static int jz4760_ssi0_dr_d_pins[] = { 0x74, }; +static int jz4760_ssi0_dr_e_pins[] = { 0x8e, }; +static int jz4760_ssi0_clk_a_pins[] = { 0x12, }; +static int jz4760_ssi0_clk_b_pins[] = { 0x3c, }; +static int jz4760_ssi0_clk_d_pins[] = { 0x78, }; +static int jz4760_ssi0_clk_e_pins[] = { 0x8f, }; +static int jz4760_ssi0_gpc_b_pins[] = { 0x3e, }; +static int jz4760_ssi0_gpc_d_pins[] = { 0x76, }; +static int jz4760_ssi0_gpc_e_pins[] = { 0x93, }; +static int jz4760_ssi0_ce0_a_pins[] = { 0x13, }; +static int jz4760_ssi0_ce0_b_pins[] = { 0x3d, }; +static int jz4760_ssi0_ce0_d_pins[] = { 0x79, }; +static int jz4760_ssi0_ce0_e_pins[] = { 0x90, }; +static int jz4760_ssi0_ce1_b_pins[] = { 0x3f, }; +static int jz4760_ssi0_ce1_d_pins[] = { 0x77, }; +static int jz4760_ssi0_ce1_e_pins[] = { 0x92, }; +static int jz4760_ssi1_dt_b_9_pins[] = { 0x29, }; +static int jz4760_ssi1_dt_b_21_pins[] = { 0x35, }; +static int jz4760_ssi1_dt_d_12_pins[] = { 0x6c, }; +static int jz4760_ssi1_dt_d_21_pins[] = { 0x75, }; +static int jz4760_ssi1_dt_e_pins[] = { 0x91, }; +static int jz4760_ssi1_dt_f_pins[] = { 0xa3, }; +static int jz4760_ssi1_dr_b_6_pins[] = { 0x26, }; +static int jz4760_ssi1_dr_b_20_pins[] = { 0x34, }; +static int jz4760_ssi1_dr_d_13_pins[] = { 0x6d, }; +static int jz4760_ssi1_dr_d_20_pins[] = { 0x74, }; +static int jz4760_ssi1_dr_e_pins[] = { 0x8e, }; +static int jz4760_ssi1_dr_f_pins[] = { 0xa0, }; +static int jz4760_ssi1_clk_b_7_pins[] = { 0x27, }; +static int jz4760_ssi1_clk_b_28_pins[] = { 0x3c, }; +static int jz4760_ssi1_clk_d_pins[] = { 0x78, }; +static int jz4760_ssi1_clk_e_7_pins[] = { 0x87, }; +static int jz4760_ssi1_clk_e_15_pins[] = { 0x8f, }; +static int jz4760_ssi1_clk_f_pins[] = { 0xa2, }; +static int jz4760_ssi1_gpc_b_pins[] = { 0x3e, }; +static int jz4760_ssi1_gpc_d_pins[] = { 0x76, }; +static int jz4760_ssi1_gpc_e_pins[] = { 0x93, }; +static int jz4760_ssi1_ce0_b_8_pins[] = { 0x28, }; +static int jz4760_ssi1_ce0_b_29_pins[] = { 0x3d, }; +static int jz4760_ssi1_ce0_d_pins[] = { 0x79, }; +static int jz4760_ssi1_ce0_e_6_pins[] = { 0x86, }; +static int jz4760_ssi1_ce0_e_16_pins[] = { 0x90, }; +static int jz4760_ssi1_ce0_f_pins[] = { 0xa1, }; +static int jz4760_ssi1_ce1_b_pins[] = { 0x3f, }; +static int jz4760_ssi1_ce1_d_pins[] = { 0x77, }; +static int jz4760_ssi1_ce1_e_pins[] = { 0x92, }; static int jz4760_mmc0_1bit_a_pins[] = { 0x12, 0x13, 0x14, }; static int jz4760_mmc0_4bit_a_pins[] = { 0x15, 0x16, 0x17, }; static int jz4760_mmc0_1bit_e_pins[] = { 0x9c, 0x9d, 0x94, }; @@ -801,6 +887,58 @@ static const struct group_desc jz4760_groups[] = { INGENIC_PIN_GROUP_FUNCS("uart3-data", jz4760_uart3_data, jz4760_uart3_data_funcs), INGENIC_PIN_GROUP("uart3-hwflow", jz4760_uart3_hwflow, 0), + INGENIC_PIN_GROUP("ssi0-dt-a", jz4760_ssi0_dt_a, 2), + INGENIC_PIN_GROUP("ssi0-dt-b", jz4760_ssi0_dt_b, 1), + INGENIC_PIN_GROUP("ssi0-dt-d", jz4760_ssi0_dt_d, 1), + INGENIC_PIN_GROUP("ssi0-dt-e", jz4760_ssi0_dt_e, 0), + INGENIC_PIN_GROUP("ssi0-dr-a", jz4760_ssi0_dr_a, 1), + INGENIC_PIN_GROUP("ssi0-dr-b", jz4760_ssi0_dr_b, 1), + INGENIC_PIN_GROUP("ssi0-dr-d", jz4760_ssi0_dr_d, 1), + INGENIC_PIN_GROUP("ssi0-dr-e", jz4760_ssi0_dr_e, 0), + INGENIC_PIN_GROUP("ssi0-clk-a", jz4760_ssi0_clk_a, 2), + INGENIC_PIN_GROUP("ssi0-clk-b", jz4760_ssi0_clk_b, 1), + INGENIC_PIN_GROUP("ssi0-clk-d", jz4760_ssi0_clk_d, 1), + INGENIC_PIN_GROUP("ssi0-clk-e", jz4760_ssi0_clk_e, 0), + INGENIC_PIN_GROUP("ssi0-gpc-b", jz4760_ssi0_gpc_b, 1), + INGENIC_PIN_GROUP("ssi0-gpc-d", jz4760_ssi0_gpc_d, 1), + INGENIC_PIN_GROUP("ssi0-gpc-e", jz4760_ssi0_gpc_e, 0), + INGENIC_PIN_GROUP("ssi0-ce0-a", jz4760_ssi0_ce0_a, 2), + INGENIC_PIN_GROUP("ssi0-ce0-b", jz4760_ssi0_ce0_b, 1), + INGENIC_PIN_GROUP("ssi0-ce0-d", jz4760_ssi0_ce0_d, 1), + INGENIC_PIN_GROUP("ssi0-ce0-e", jz4760_ssi0_ce0_e, 0), + INGENIC_PIN_GROUP("ssi0-ce1-b", jz4760_ssi0_ce1_b, 1), + INGENIC_PIN_GROUP("ssi0-ce1-d", jz4760_ssi0_ce1_d, 1), + INGENIC_PIN_GROUP("ssi0-ce1-e", jz4760_ssi0_ce1_e, 0), + INGENIC_PIN_GROUP("ssi1-dt-b-9", jz4760_ssi1_dt_b_9, 2), + INGENIC_PIN_GROUP("ssi1-dt-b-21", jz4760_ssi1_dt_b_21, 2), + INGENIC_PIN_GROUP("ssi1-dt-d-12", jz4760_ssi1_dt_d_12, 2), + INGENIC_PIN_GROUP("ssi1-dt-d-21", jz4760_ssi1_dt_d_21, 2), + INGENIC_PIN_GROUP("ssi1-dt-e", jz4760_ssi1_dt_e, 1), + INGENIC_PIN_GROUP("ssi1-dt-f", jz4760_ssi1_dt_f, 2), + INGENIC_PIN_GROUP("ssi1-dr-b-6", jz4760_ssi1_dr_b_6, 2), + INGENIC_PIN_GROUP("ssi1-dr-b-20", jz4760_ssi1_dr_b_20, 2), + INGENIC_PIN_GROUP("ssi1-dr-d-13", jz4760_ssi1_dr_d_13, 2), + INGENIC_PIN_GROUP("ssi1-dr-d-20", jz4760_ssi1_dr_d_20, 2), + INGENIC_PIN_GROUP("ssi1-dr-e", jz4760_ssi1_dr_e, 1), + INGENIC_PIN_GROUP("ssi1-dr-f", jz4760_ssi1_dr_f, 2), + INGENIC_PIN_GROUP("ssi1-clk-b-7", jz4760_ssi1_clk_b_7, 2), + INGENIC_PIN_GROUP("ssi1-clk-b-28", jz4760_ssi1_clk_b_28, 2), + INGENIC_PIN_GROUP("ssi1-clk-d", jz4760_ssi1_clk_d, 2), + INGENIC_PIN_GROUP("ssi1-clk-e-7", jz4760_ssi1_clk_e_7, 2), + INGENIC_PIN_GROUP("ssi1-clk-e-15", jz4760_ssi1_clk_e_15, 1), + INGENIC_PIN_GROUP("ssi1-clk-f", jz4760_ssi1_clk_f, 2), + INGENIC_PIN_GROUP("ssi1-gpc-b", jz4760_ssi1_gpc_b, 2), + INGENIC_PIN_GROUP("ssi1-gpc-d", jz4760_ssi1_gpc_d, 2), + INGENIC_PIN_GROUP("ssi1-gpc-e", jz4760_ssi1_gpc_e, 1), + INGENIC_PIN_GROUP("ssi1-ce0-b-8", jz4760_ssi1_ce0_b_8, 2), + INGENIC_PIN_GROUP("ssi1-ce0-b-29", jz4760_ssi1_ce0_b_29, 2), + INGENIC_PIN_GROUP("ssi1-ce0-d", jz4760_ssi1_ce0_d, 2), + INGENIC_PIN_GROUP("ssi1-ce0-e-6", jz4760_ssi1_ce0_e_6, 2), + INGENIC_PIN_GROUP("ssi1-ce0-e-16", jz4760_ssi1_ce0_e_16, 1), + INGENIC_PIN_GROUP("ssi1-ce0-f", jz4760_ssi1_ce0_f, 2), + INGENIC_PIN_GROUP("ssi1-ce1-b", jz4760_ssi1_ce1_b, 2), + INGENIC_PIN_GROUP("ssi1-ce1-d", jz4760_ssi1_ce1_d, 2), + INGENIC_PIN_GROUP("ssi1-ce1-e", jz4760_ssi1_ce1_e, 1), INGENIC_PIN_GROUP_FUNCS("mmc0-1bit-a", jz4760_mmc0_1bit_a, jz4760_mmc0_1bit_a_funcs), INGENIC_PIN_GROUP("mmc0-4bit-a", jz4760_mmc0_4bit_a, 1), @@ -854,6 +992,22 @@ static const char *jz4760_uart0_groups[] = { "uart0-data", "uart0-hwflow", }; static const char *jz4760_uart1_groups[] = { "uart1-data", "uart1-hwflow", }; static const char *jz4760_uart2_groups[] = { "uart2-data", "uart2-hwflow", }; static const char *jz4760_uart3_groups[] = { "uart3-data", "uart3-hwflow", }; +static const char *jz4760_ssi0_groups[] = { + "ssi0-dt-a", "ssi0-dt-b", "ssi0-dt-d", "ssi0-dt-e", + "ssi0-dr-a", "ssi0-dr-b", "ssi0-dr-d", "ssi0-dr-e", + "ssi0-clk-a", "ssi0-clk-b", "ssi0-clk-d", "ssi0-clk-e", + "ssi0-gpc-b", "ssi0-gpc-d", "ssi0-gpc-e", + "ssi0-ce0-a", "ssi0-ce0-b", "ssi0-ce0-d", "ssi0-ce0-e", + "ssi0-ce1-b", "ssi0-ce1-d", "ssi0-ce1-e", +}; +static const char *jz4760_ssi1_groups[] = { + "ssi1-dt-b-9", "ssi1-dt-b-21", "ssi1-dt-d-12", "ssi1-dt-d-21", "ssi1-dt-e", "ssi1-dt-f", + "ssi1-dr-b-6", "ssi1-dr-b-20", "ssi1-dr-d-13", "ssi1-dr-d-20", "ssi1-dr-e", "ssi1-dr-f", + "ssi1-clk-b-7", "ssi1-clk-b-28", "ssi1-clk-d", "ssi1-clk-e-7", "ssi1-clk-e-15", "ssi1-clk-f", + "ssi1-gpc-b", "ssi1-gpc-d", "ssi1-gpc-e", + "ssi1-ce0-b-8", "ssi1-ce0-b-29", "ssi1-ce0-d", "ssi1-ce0-e-6", "ssi1-ce0-e-16", "ssi1-ce0-f", + "ssi1-ce1-b", "ssi1-ce1-d", "ssi1-ce1-e", +}; static const char *jz4760_mmc0_groups[] = { "mmc0-1bit-a", "mmc0-4bit-a", "mmc0-1bit-e", "mmc0-4bit-e", "mmc0-8bit-e", @@ -898,6 +1052,8 @@ static const struct function_desc jz4760_functions[] = { { "uart1", jz4760_uart1_groups, ARRAY_SIZE(jz4760_uart1_groups), }, { "uart2", jz4760_uart2_groups, ARRAY_SIZE(jz4760_uart2_groups), }, { "uart3", jz4760_uart3_groups, ARRAY_SIZE(jz4760_uart3_groups), }, + { "ssi0", jz4760_ssi0_groups, ARRAY_SIZE(jz4760_ssi0_groups), }, + { "ssi1", jz4760_ssi1_groups, ARRAY_SIZE(jz4760_ssi1_groups), }, { "mmc0", jz4760_mmc0_groups, ARRAY_SIZE(jz4760_mmc0_groups), }, { "mmc1", jz4760_mmc1_groups, ARRAY_SIZE(jz4760_mmc1_groups), }, { "mmc2", jz4760_mmc2_groups, ARRAY_SIZE(jz4760_mmc2_groups), }, @@ -936,11 +1092,11 @@ static const struct ingenic_chip_info jz4760_chip_info = { }; static const u32 jz4770_pull_ups[6] = { - 0x3fffffff, 0xfff0030c, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0xffa7f00f, + 0x3fffffff, 0xfff0f3fc, 0xffffffff, 0xffff4fff, 0xfffffb7c, 0x0024f00f, }; static const u32 jz4770_pull_downs[6] = { - 0x00000000, 0x000f0c03, 0x00000000, 0x0000b000, 0x00000483, 0x00580ff0, + 0x00000000, 0x000f0c03, 0x00000000, 0x0000b000, 0x00000483, 0x005b0ff0, }; static int jz4770_uart0_data_pins[] = { 0xa0, 0xa3, }; @@ -1827,7 +1983,9 @@ static int x1000_uart1_data_d_pins[] = { 0x62, 0x63, }; static int x1000_uart1_hwflow_pins[] = { 0x64, 0x65, }; static int x1000_uart2_data_a_pins[] = { 0x02, 0x03, }; static int x1000_uart2_data_d_pins[] = { 0x65, 0x64, }; -static int x1000_sfc_pins[] = { 0x1d, 0x1c, 0x1e, 0x1f, 0x1a, 0x1b, }; +static int x1000_sfc_data_pins[] = { 0x1d, 0x1c, 0x1e, 0x1f, }; +static int x1000_sfc_clk_pins[] = { 0x1a, }; +static int x1000_sfc_ce_pins[] = { 0x1b, }; static int x1000_ssi_dt_a_22_pins[] = { 0x16, }; static int x1000_ssi_dt_a_29_pins[] = { 0x1d, }; static int x1000_ssi_dt_d_pins[] = { 0x62, }; @@ -1871,8 +2029,8 @@ static int x1000_i2s_data_tx_pins[] = { 0x24, }; static int x1000_i2s_data_rx_pins[] = { 0x23, }; static int x1000_i2s_clk_txrx_pins[] = { 0x21, 0x22, }; static int x1000_i2s_sysclk_pins[] = { 0x20, }; -static int x1000_dmic0_pins[] = { 0x35, 0x36, }; -static int x1000_dmic1_pins[] = { 0x25, }; +static int x1000_dmic_if0_pins[] = { 0x35, 0x36, }; +static int x1000_dmic_if1_pins[] = { 0x25, }; static int x1000_cim_pins[] = { 0x08, 0x09, 0x0a, 0x0b, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, 0x0d, 0x0c, @@ -1901,7 +2059,9 @@ static const struct group_desc x1000_groups[] = { INGENIC_PIN_GROUP("uart1-hwflow", x1000_uart1_hwflow, 1), INGENIC_PIN_GROUP("uart2-data-a", x1000_uart2_data_a, 2), INGENIC_PIN_GROUP("uart2-data-d", x1000_uart2_data_d, 0), - INGENIC_PIN_GROUP("sfc", x1000_sfc, 1), + INGENIC_PIN_GROUP("sfc-data", x1000_sfc_data, 1), + INGENIC_PIN_GROUP("sfc-clk", x1000_sfc_clk, 1), + INGENIC_PIN_GROUP("sfc-ce", x1000_sfc_ce, 1), INGENIC_PIN_GROUP("ssi-dt-a-22", x1000_ssi_dt_a_22, 2), INGENIC_PIN_GROUP("ssi-dt-a-29", x1000_ssi_dt_a_29, 2), INGENIC_PIN_GROUP("ssi-dt-d", x1000_ssi_dt_d, 0), @@ -1938,8 +2098,8 @@ static const struct group_desc x1000_groups[] = { INGENIC_PIN_GROUP("i2s-data-rx", x1000_i2s_data_rx, 1), INGENIC_PIN_GROUP("i2s-clk-txrx", x1000_i2s_clk_txrx, 1), INGENIC_PIN_GROUP("i2s-sysclk", x1000_i2s_sysclk, 1), - INGENIC_PIN_GROUP("dmic0", x1000_dmic0, 0), - INGENIC_PIN_GROUP("dmic1", x1000_dmic1, 1), + INGENIC_PIN_GROUP("dmic-if0", x1000_dmic_if0, 0), + INGENIC_PIN_GROUP("dmic-if1", x1000_dmic_if1, 1), INGENIC_PIN_GROUP("cim-data", x1000_cim, 2), INGENIC_PIN_GROUP("lcd-8bit", x1000_lcd_8bit, 1), INGENIC_PIN_GROUP("lcd-16bit", x1000_lcd_16bit, 1), @@ -1956,7 +2116,7 @@ static const char *x1000_uart1_groups[] = { "uart1-data-a", "uart1-data-d", "uart1-hwflow", }; static const char *x1000_uart2_groups[] = { "uart2-data-a", "uart2-data-d", }; -static const char *x1000_sfc_groups[] = { "sfc", }; +static const char *x1000_sfc_groups[] = { "sfc-data", "sfc-clk", "sfc-ce", }; static const char *x1000_ssi_groups[] = { "ssi-dt-a-22", "ssi-dt-a-29", "ssi-dt-d", "ssi-dr-a-23", "ssi-dr-a-28", "ssi-dr-d", @@ -1983,7 +2143,7 @@ static const char *x1000_i2c2_groups[] = { "i2c2-data", }; static const char *x1000_i2s_groups[] = { "i2s-data-tx", "i2s-data-rx", "i2s-clk-txrx", "i2s-sysclk", }; -static const char *x1000_dmic_groups[] = { "dmic0", "dmic1", }; +static const char *x1000_dmic_groups[] = { "dmic-if0", "dmic-if1", }; static const char *x1000_cim_groups[] = { "cim-data", }; static const char *x1000_lcd_groups[] = { "lcd-8bit", "lcd-16bit", }; static const char *x1000_pwm0_groups[] = { "pwm0", }; @@ -2048,8 +2208,8 @@ static int x1500_i2s_data_tx_pins[] = { 0x24, }; static int x1500_i2s_data_rx_pins[] = { 0x23, }; static int x1500_i2s_clk_txrx_pins[] = { 0x21, 0x22, }; static int x1500_i2s_sysclk_pins[] = { 0x20, }; -static int x1500_dmic0_pins[] = { 0x35, 0x36, }; -static int x1500_dmic1_pins[] = { 0x25, }; +static int x1500_dmic_if0_pins[] = { 0x35, 0x36, }; +static int x1500_dmic_if1_pins[] = { 0x25, }; static int x1500_cim_pins[] = { 0x08, 0x09, 0x0a, 0x0b, 0x13, 0x12, 0x11, 0x10, 0x0f, 0x0e, 0x0d, 0x0c, @@ -2068,7 +2228,9 @@ static const struct group_desc x1500_groups[] = { INGENIC_PIN_GROUP("uart1-hwflow", x1500_uart1_hwflow, 1), INGENIC_PIN_GROUP("uart2-data-a", x1500_uart2_data_a, 2), INGENIC_PIN_GROUP("uart2-data-d", x1500_uart2_data_d, 0), - INGENIC_PIN_GROUP("sfc", x1000_sfc, 1), + INGENIC_PIN_GROUP("sfc-data", x1000_sfc_data, 1), + INGENIC_PIN_GROUP("sfc-clk", x1000_sfc_clk, 1), + INGENIC_PIN_GROUP("sfc-ce", x1000_sfc_ce, 1), INGENIC_PIN_GROUP("mmc-1bit", x1500_mmc_1bit, 1), INGENIC_PIN_GROUP("mmc-4bit", x1500_mmc_4bit, 1), INGENIC_PIN_GROUP("i2c0-data", x1500_i2c0, 0), @@ -2079,8 +2241,8 @@ static const struct group_desc x1500_groups[] = { INGENIC_PIN_GROUP("i2s-data-rx", x1500_i2s_data_rx, 1), INGENIC_PIN_GROUP("i2s-clk-txrx", x1500_i2s_clk_txrx, 1), INGENIC_PIN_GROUP("i2s-sysclk", x1500_i2s_sysclk, 1), - INGENIC_PIN_GROUP("dmic0", x1500_dmic0, 0), - INGENIC_PIN_GROUP("dmic1", x1500_dmic1, 1), + INGENIC_PIN_GROUP("dmic-if0", x1500_dmic_if0, 0), + INGENIC_PIN_GROUP("dmic-if1", x1500_dmic_if1, 1), INGENIC_PIN_GROUP("cim-data", x1500_cim, 2), INGENIC_PIN_GROUP("pwm0", x1500_pwm_pwm0, 0), INGENIC_PIN_GROUP("pwm1", x1500_pwm_pwm1, 1), @@ -2101,7 +2263,7 @@ static const char *x1500_i2c2_groups[] = { "i2c2-data", }; static const char *x1500_i2s_groups[] = { "i2s-data-tx", "i2s-data-rx", "i2s-clk-txrx", "i2s-sysclk", }; -static const char *x1500_dmic_groups[] = { "dmic0", "dmic1", }; +static const char *x1500_dmic_groups[] = { "dmic-if0", "dmic-if1", }; static const char *x1500_cim_groups[] = { "cim-data", }; static const char *x1500_pwm0_groups[] = { "pwm0", }; static const char *x1500_pwm1_groups[] = { "pwm1", }; @@ -2151,7 +2313,9 @@ static const u32 x1830_pull_downs[4] = { static int x1830_uart0_data_pins[] = { 0x33, 0x36, }; static int x1830_uart0_hwflow_pins[] = { 0x34, 0x35, }; static int x1830_uart1_data_pins[] = { 0x38, 0x37, }; -static int x1830_sfc_pins[] = { 0x17, 0x18, 0x1a, 0x19, 0x1b, 0x1c, }; +static int x1830_sfc_data_pins[] = { 0x17, 0x18, 0x1a, 0x19, }; +static int x1830_sfc_clk_pins[] = { 0x1b, }; +static int x1830_sfc_ce_pins[] = { 0x1c, }; static int x1830_ssi0_dt_pins[] = { 0x4c, }; static int x1830_ssi0_dr_pins[] = { 0x4b, }; static int x1830_ssi0_clk_pins[] = { 0x4f, }; @@ -2182,8 +2346,8 @@ static int x1830_i2s_data_rx_pins[] = { 0x54, }; static int x1830_i2s_clk_txrx_pins[] = { 0x58, 0x52, }; static int x1830_i2s_clk_rx_pins[] = { 0x56, 0x55, }; static int x1830_i2s_sysclk_pins[] = { 0x57, }; -static int x1830_dmic0_pins[] = { 0x48, 0x59, }; -static int x1830_dmic1_pins[] = { 0x5a, }; +static int x1830_dmic_if0_pins[] = { 0x48, 0x59, }; +static int x1830_dmic_if1_pins[] = { 0x5a, }; static int x1830_lcd_tft_8bit_pins[] = { 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x73, 0x72, 0x69, @@ -2223,7 +2387,9 @@ static const struct group_desc x1830_groups[] = { INGENIC_PIN_GROUP("uart0-data", x1830_uart0_data, 0), INGENIC_PIN_GROUP("uart0-hwflow", x1830_uart0_hwflow, 0), INGENIC_PIN_GROUP("uart1-data", x1830_uart1_data, 0), - INGENIC_PIN_GROUP("sfc", x1830_sfc, 1), + INGENIC_PIN_GROUP("sfc-data", x1830_sfc_data, 1), + INGENIC_PIN_GROUP("sfc-clk", x1830_sfc_clk, 1), + INGENIC_PIN_GROUP("sfc-ce", x1830_sfc_ce, 1), INGENIC_PIN_GROUP("ssi0-dt", x1830_ssi0_dt, 0), INGENIC_PIN_GROUP("ssi0-dr", x1830_ssi0_dr, 0), INGENIC_PIN_GROUP("ssi0-clk", x1830_ssi0_clk, 0), @@ -2254,8 +2420,8 @@ static const struct group_desc x1830_groups[] = { INGENIC_PIN_GROUP("i2s-clk-txrx", x1830_i2s_clk_txrx, 0), INGENIC_PIN_GROUP("i2s-clk-rx", x1830_i2s_clk_rx, 0), INGENIC_PIN_GROUP("i2s-sysclk", x1830_i2s_sysclk, 0), - INGENIC_PIN_GROUP("dmic0", x1830_dmic0, 2), - INGENIC_PIN_GROUP("dmic1", x1830_dmic1, 2), + INGENIC_PIN_GROUP("dmic-if0", x1830_dmic_if0, 2), + INGENIC_PIN_GROUP("dmic-if1", x1830_dmic_if1, 2), INGENIC_PIN_GROUP("lcd-tft-8bit", x1830_lcd_tft_8bit, 0), INGENIC_PIN_GROUP("lcd-tft-24bit", x1830_lcd_tft_24bit, 0), INGENIC_PIN_GROUP("lcd-slcd-8bit", x1830_lcd_slcd_8bit, 1), @@ -2281,7 +2447,7 @@ static const struct group_desc x1830_groups[] = { static const char *x1830_uart0_groups[] = { "uart0-data", "uart0-hwflow", }; static const char *x1830_uart1_groups[] = { "uart1-data", }; -static const char *x1830_sfc_groups[] = { "sfc", }; +static const char *x1830_sfc_groups[] = { "sfc-data", "sfc-clk", "sfc-ce", }; static const char *x1830_ssi0_groups[] = { "ssi0-dt", "ssi0-dr", "ssi0-clk", "ssi0-gpc", "ssi0-ce0", "ssi0-ce1", }; @@ -2301,7 +2467,7 @@ static const char *x1830_i2c2_groups[] = { "i2c2-data", }; static const char *x1830_i2s_groups[] = { "i2s-data-tx", "i2s-data-rx", "i2s-clk-txrx", "i2s-clk-rx", "i2s-sysclk", }; -static const char *x1830_dmic_groups[] = { "dmic0", "dmic1", }; +static const char *x1830_dmic_groups[] = { "dmic-if0", "dmic-if1", }; static const char *x1830_lcd_groups[] = { "lcd-tft-8bit", "lcd-tft-24bit", "lcd-slcd-8bit", "lcd-slcd-16bit", }; @@ -2381,17 +2547,21 @@ static int x2000_uart7_data_a_pins[] = { 0x08, 0x09, }; static int x2000_uart7_data_c_pins[] = { 0x41, 0x42, }; static int x2000_uart8_data_pins[] = { 0x3c, 0x3d, }; static int x2000_uart9_data_pins[] = { 0x3e, 0x3f, }; -static int x2000_sfc0_d_pins[] = { 0x73, 0x74, 0x75, 0x76, 0x71, 0x72, }; -static int x2000_sfc0_e_pins[] = { 0x92, 0x93, 0x94, 0x95, 0x90, 0x91, }; -static int x2000_sfc1_pins[] = { 0x77, 0x78, 0x79, 0x7a, }; +static int x2000_sfc_data_if0_d_pins[] = { 0x73, 0x74, 0x75, 0x76, }; +static int x2000_sfc_data_if0_e_pins[] = { 0x92, 0x93, 0x94, 0x95, }; +static int x2000_sfc_data_if1_pins[] = { 0x77, 0x78, 0x79, 0x7a, }; +static int x2000_sfc_clk_d_pins[] = { 0x71, }; +static int x2000_sfc_clk_e_pins[] = { 0x90, }; +static int x2000_sfc_ce_d_pins[] = { 0x72, }; +static int x2000_sfc_ce_e_pins[] = { 0x91, }; static int x2000_ssi0_dt_b_pins[] = { 0x3e, }; static int x2000_ssi0_dt_d_pins[] = { 0x69, }; static int x2000_ssi0_dr_b_pins[] = { 0x3d, }; static int x2000_ssi0_dr_d_pins[] = { 0x6a, }; static int x2000_ssi0_clk_b_pins[] = { 0x3f, }; static int x2000_ssi0_clk_d_pins[] = { 0x68, }; -static int x2000_ssi0_ce0_b_pins[] = { 0x3c, }; -static int x2000_ssi0_ce0_d_pins[] = { 0x6d, }; +static int x2000_ssi0_ce_b_pins[] = { 0x3c, }; +static int x2000_ssi0_ce_d_pins[] = { 0x6d, }; static int x2000_ssi1_dt_c_pins[] = { 0x4b, }; static int x2000_ssi1_dt_d_pins[] = { 0x72, }; static int x2000_ssi1_dt_e_pins[] = { 0x91, }; @@ -2401,9 +2571,9 @@ static int x2000_ssi1_dr_e_pins[] = { 0x92, }; static int x2000_ssi1_clk_c_pins[] = { 0x4c, }; static int x2000_ssi1_clk_d_pins[] = { 0x71, }; static int x2000_ssi1_clk_e_pins[] = { 0x90, }; -static int x2000_ssi1_ce0_c_pins[] = { 0x49, }; -static int x2000_ssi1_ce0_d_pins[] = { 0x76, }; -static int x2000_ssi1_ce0_e_pins[] = { 0x95, }; +static int x2000_ssi1_ce_c_pins[] = { 0x49, }; +static int x2000_ssi1_ce_d_pins[] = { 0x76, }; +static int x2000_ssi1_ce_e_pins[] = { 0x95, }; static int x2000_mmc0_1bit_pins[] = { 0x71, 0x72, 0x73, }; static int x2000_mmc0_4bit_pins[] = { 0x74, 0x75, 0x75, }; static int x2000_mmc0_8bit_pins[] = { 0x77, 0x78, 0x79, 0x7a, }; @@ -2455,10 +2625,10 @@ static int x2000_i2s3_data_tx2_pins[] = { 0x05, }; static int x2000_i2s3_data_tx3_pins[] = { 0x06, }; static int x2000_i2s3_clk_tx_pins[] = { 0x10, 0x02, }; static int x2000_i2s3_sysclk_tx_pins[] = { 0x00, }; -static int x2000_dmic0_pins[] = { 0x54, 0x55, }; -static int x2000_dmic1_pins[] = { 0x56, }; -static int x2000_dmic2_pins[] = { 0x57, }; -static int x2000_dmic3_pins[] = { 0x58, }; +static int x2000_dmic_if0_pins[] = { 0x54, 0x55, }; +static int x2000_dmic_if1_pins[] = { 0x56, }; +static int x2000_dmic_if2_pins[] = { 0x57, }; +static int x2000_dmic_if3_pins[] = { 0x58, }; static int x2000_cim_8bit_pins[] = { 0x0e, 0x0c, 0x0d, 0x4f, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, @@ -2545,17 +2715,21 @@ static const struct group_desc x2000_groups[] = { INGENIC_PIN_GROUP("uart7-data-c", x2000_uart7_data_c, 3), INGENIC_PIN_GROUP("uart8-data", x2000_uart8_data, 3), INGENIC_PIN_GROUP("uart9-data", x2000_uart9_data, 3), - INGENIC_PIN_GROUP("sfc0-d", x2000_sfc0_d, 1), - INGENIC_PIN_GROUP("sfc0-e", x2000_sfc0_e, 0), - INGENIC_PIN_GROUP("sfc1", x2000_sfc1, 1), + INGENIC_PIN_GROUP("sfc-data-if0-d", x2000_sfc_data_if0_d, 1), + INGENIC_PIN_GROUP("sfc-data-if0-e", x2000_sfc_data_if0_e, 0), + INGENIC_PIN_GROUP("sfc-data-if1", x2000_sfc_data_if1, 1), + INGENIC_PIN_GROUP("sfc-clk-d", x2000_sfc_clk_d, 1), + INGENIC_PIN_GROUP("sfc-clk-e", x2000_sfc_clk_e, 0), + INGENIC_PIN_GROUP("sfc-ce-d", x2000_sfc_ce_d, 1), + INGENIC_PIN_GROUP("sfc-ce-e", x2000_sfc_ce_e, 0), INGENIC_PIN_GROUP("ssi0-dt-b", x2000_ssi0_dt_b, 1), INGENIC_PIN_GROUP("ssi0-dt-d", x2000_ssi0_dt_d, 1), INGENIC_PIN_GROUP("ssi0-dr-b", x2000_ssi0_dr_b, 1), INGENIC_PIN_GROUP("ssi0-dr-d", x2000_ssi0_dr_d, 1), INGENIC_PIN_GROUP("ssi0-clk-b", x2000_ssi0_clk_b, 1), INGENIC_PIN_GROUP("ssi0-clk-d", x2000_ssi0_clk_d, 1), - INGENIC_PIN_GROUP("ssi0-ce0-b", x2000_ssi0_ce0_b, 1), - INGENIC_PIN_GROUP("ssi0-ce0-d", x2000_ssi0_ce0_d, 1), + INGENIC_PIN_GROUP("ssi0-ce-b", x2000_ssi0_ce_b, 1), + INGENIC_PIN_GROUP("ssi0-ce-d", x2000_ssi0_ce_d, 1), INGENIC_PIN_GROUP("ssi1-dt-c", x2000_ssi1_dt_c, 2), INGENIC_PIN_GROUP("ssi1-dt-d", x2000_ssi1_dt_d, 2), INGENIC_PIN_GROUP("ssi1-dt-e", x2000_ssi1_dt_e, 1), @@ -2565,9 +2739,9 @@ static const struct group_desc x2000_groups[] = { INGENIC_PIN_GROUP("ssi1-clk-c", x2000_ssi1_clk_c, 2), INGENIC_PIN_GROUP("ssi1-clk-d", x2000_ssi1_clk_d, 2), INGENIC_PIN_GROUP("ssi1-clk-e", x2000_ssi1_clk_e, 1), - INGENIC_PIN_GROUP("ssi1-ce0-c", x2000_ssi1_ce0_c, 2), - INGENIC_PIN_GROUP("ssi1-ce0-d", x2000_ssi1_ce0_d, 2), - INGENIC_PIN_GROUP("ssi1-ce0-e", x2000_ssi1_ce0_e, 1), + INGENIC_PIN_GROUP("ssi1-ce-c", x2000_ssi1_ce_c, 2), + INGENIC_PIN_GROUP("ssi1-ce-d", x2000_ssi1_ce_d, 2), + INGENIC_PIN_GROUP("ssi1-ce-e", x2000_ssi1_ce_e, 1), INGENIC_PIN_GROUP("mmc0-1bit", x2000_mmc0_1bit, 0), INGENIC_PIN_GROUP("mmc0-4bit", x2000_mmc0_4bit, 0), INGENIC_PIN_GROUP("mmc0-8bit", x2000_mmc0_8bit, 0), @@ -2612,10 +2786,10 @@ static const struct group_desc x2000_groups[] = { INGENIC_PIN_GROUP("i2s3-data-tx3", x2000_i2s3_data_tx3, 2), INGENIC_PIN_GROUP("i2s3-clk-tx", x2000_i2s3_clk_tx, 2), INGENIC_PIN_GROUP("i2s3-sysclk-tx", x2000_i2s3_sysclk_tx, 2), - INGENIC_PIN_GROUP("dmic0", x2000_dmic0, 0), - INGENIC_PIN_GROUP("dmic1", x2000_dmic1, 0), - INGENIC_PIN_GROUP("dmic2", x2000_dmic2, 0), - INGENIC_PIN_GROUP("dmic3", x2000_dmic3, 0), + INGENIC_PIN_GROUP("dmic-if0", x2000_dmic_if0, 0), + INGENIC_PIN_GROUP("dmic-if1", x2000_dmic_if1, 0), + INGENIC_PIN_GROUP("dmic-if2", x2000_dmic_if2, 0), + INGENIC_PIN_GROUP("dmic-if3", x2000_dmic_if3, 0), INGENIC_PIN_GROUP_FUNCS("cim-data-8bit", x2000_cim_8bit, x2000_cim_8bit_funcs), INGENIC_PIN_GROUP("cim-data-12bit", x2000_cim_12bit, 0), @@ -2670,18 +2844,21 @@ static const char *x2000_uart6_groups[] = { "uart6-data-a", "uart6-data-c", }; static const char *x2000_uart7_groups[] = { "uart7-data-a", "uart7-data-c", }; static const char *x2000_uart8_groups[] = { "uart8-data", }; static const char *x2000_uart9_groups[] = { "uart9-data", }; -static const char *x2000_sfc_groups[] = { "sfc0-d", "sfc0-e", "sfc1", }; +static const char *x2000_sfc_groups[] = { + "sfc-data-if0-d", "sfc-data-if0-e", "sfc-data-if1", + "sfc-clk-d", "sfc-clk-e", "sfc-ce-d", "sfc-ce-e", +}; static const char *x2000_ssi0_groups[] = { "ssi0-dt-b", "ssi0-dt-d", "ssi0-dr-b", "ssi0-dr-d", "ssi0-clk-b", "ssi0-clk-d", - "ssi0-ce0-b", "ssi0-ce0-d", + "ssi0-ce-b", "ssi0-ce-d", }; static const char *x2000_ssi1_groups[] = { "ssi1-dt-c", "ssi1-dt-d", "ssi1-dt-e", "ssi1-dr-c", "ssi1-dr-d", "ssi1-dr-e", "ssi1-clk-c", "ssi1-clk-d", "ssi1-clk-e", - "ssi1-ce0-c", "ssi1-ce0-d", "ssi1-ce0-e", + "ssi1-ce-c", "ssi1-ce-d", "ssi1-ce-e", }; static const char *x2000_mmc0_groups[] = { "mmc0-1bit", "mmc0-4bit", "mmc0-8bit", }; static const char *x2000_mmc1_groups[] = { "mmc1-1bit", "mmc1-4bit", }; @@ -2711,7 +2888,9 @@ static const char *x2000_i2s3_groups[] = { "i2s3-data-tx0", "i2s3-data-tx1", "i2s3-data-tx2", "i2s3-data-tx3", "i2s3-clk-tx", "i2s3-sysclk-tx", }; -static const char *x2000_dmic_groups[] = { "dmic0", "dmic1", "dmic2", "dmic3", }; +static const char *x2000_dmic_groups[] = { + "dmic-if0", "dmic-if1", "dmic-if2", "dmic-if3", +}; static const char *x2000_cim_groups[] = { "cim-data-8bit", "cim-data-12bit", }; static const char *x2000_lcd_groups[] = { "lcd-tft-8bit", "lcd-tft-16bit", "lcd-tft-18bit", "lcd-tft-24bit", @@ -2802,6 +2981,216 @@ static const struct ingenic_chip_info x2000_chip_info = { .pull_downs = x2000_pull_downs, }; +static const u32 x2100_pull_ups[5] = { + 0x0003ffff, 0xffffffff, 0x1ff0ffff, 0xc7fe3f3f, 0x0fbf003f, +}; + +static const u32 x2100_pull_downs[5] = { + 0x0003ffff, 0xffffffff, 0x1ff0ffff, 0x00000000, 0x0fbf003f, +}; + +static int x2100_mac_pins[] = { + 0x4b, 0x47, 0x46, 0x4a, 0x43, 0x42, 0x4c, 0x4d, 0x4f, 0x41, +}; + +static const struct group_desc x2100_groups[] = { + INGENIC_PIN_GROUP("uart0-data", x2000_uart0_data, 2), + INGENIC_PIN_GROUP("uart0-hwflow", x2000_uart0_hwflow, 2), + INGENIC_PIN_GROUP("uart1-data", x2000_uart1_data, 1), + INGENIC_PIN_GROUP("uart1-hwflow", x2000_uart1_hwflow, 1), + INGENIC_PIN_GROUP("uart2-data", x2000_uart2_data, 0), + INGENIC_PIN_GROUP("uart3-data-c", x2000_uart3_data_c, 0), + INGENIC_PIN_GROUP("uart3-data-d", x2000_uart3_data_d, 1), + INGENIC_PIN_GROUP("uart3-hwflow-c", x2000_uart3_hwflow_c, 0), + INGENIC_PIN_GROUP("uart3-hwflow-d", x2000_uart3_hwflow_d, 1), + INGENIC_PIN_GROUP("uart4-data-a", x2000_uart4_data_a, 1), + INGENIC_PIN_GROUP("uart4-data-c", x2000_uart4_data_c, 3), + INGENIC_PIN_GROUP("uart4-hwflow-a", x2000_uart4_hwflow_a, 1), + INGENIC_PIN_GROUP("uart4-hwflow-c", x2000_uart4_hwflow_c, 3), + INGENIC_PIN_GROUP("uart5-data-a", x2000_uart5_data_a, 1), + INGENIC_PIN_GROUP("uart5-data-c", x2000_uart5_data_c, 3), + INGENIC_PIN_GROUP("uart6-data-a", x2000_uart6_data_a, 1), + INGENIC_PIN_GROUP("uart6-data-c", x2000_uart6_data_c, 3), + INGENIC_PIN_GROUP("uart7-data-a", x2000_uart7_data_a, 1), + INGENIC_PIN_GROUP("uart7-data-c", x2000_uart7_data_c, 3), + INGENIC_PIN_GROUP("uart8-data", x2000_uart8_data, 3), + INGENIC_PIN_GROUP("uart9-data", x2000_uart9_data, 3), + INGENIC_PIN_GROUP("sfc-data-if0-d", x2000_sfc_data_if0_d, 1), + INGENIC_PIN_GROUP("sfc-data-if0-e", x2000_sfc_data_if0_e, 0), + INGENIC_PIN_GROUP("sfc-data-if1", x2000_sfc_data_if1, 1), + INGENIC_PIN_GROUP("sfc-clk-d", x2000_sfc_clk_d, 1), + INGENIC_PIN_GROUP("sfc-clk-e", x2000_sfc_clk_e, 0), + INGENIC_PIN_GROUP("sfc-ce-d", x2000_sfc_ce_d, 1), + INGENIC_PIN_GROUP("sfc-ce-e", x2000_sfc_ce_e, 0), + INGENIC_PIN_GROUP("ssi0-dt-b", x2000_ssi0_dt_b, 1), + INGENIC_PIN_GROUP("ssi0-dt-d", x2000_ssi0_dt_d, 1), + INGENIC_PIN_GROUP("ssi0-dr-b", x2000_ssi0_dr_b, 1), + INGENIC_PIN_GROUP("ssi0-dr-d", x2000_ssi0_dr_d, 1), + INGENIC_PIN_GROUP("ssi0-clk-b", x2000_ssi0_clk_b, 1), + INGENIC_PIN_GROUP("ssi0-clk-d", x2000_ssi0_clk_d, 1), + INGENIC_PIN_GROUP("ssi0-ce-b", x2000_ssi0_ce_b, 1), + INGENIC_PIN_GROUP("ssi0-ce-d", x2000_ssi0_ce_d, 1), + INGENIC_PIN_GROUP("ssi1-dt-c", x2000_ssi1_dt_c, 2), + INGENIC_PIN_GROUP("ssi1-dt-d", x2000_ssi1_dt_d, 2), + INGENIC_PIN_GROUP("ssi1-dt-e", x2000_ssi1_dt_e, 1), + INGENIC_PIN_GROUP("ssi1-dr-c", x2000_ssi1_dr_c, 2), + INGENIC_PIN_GROUP("ssi1-dr-d", x2000_ssi1_dr_d, 2), + INGENIC_PIN_GROUP("ssi1-dr-e", x2000_ssi1_dr_e, 1), + INGENIC_PIN_GROUP("ssi1-clk-c", x2000_ssi1_clk_c, 2), + INGENIC_PIN_GROUP("ssi1-clk-d", x2000_ssi1_clk_d, 2), + INGENIC_PIN_GROUP("ssi1-clk-e", x2000_ssi1_clk_e, 1), + INGENIC_PIN_GROUP("ssi1-ce-c", x2000_ssi1_ce_c, 2), + INGENIC_PIN_GROUP("ssi1-ce-d", x2000_ssi1_ce_d, 2), + INGENIC_PIN_GROUP("ssi1-ce-e", x2000_ssi1_ce_e, 1), + INGENIC_PIN_GROUP("mmc0-1bit", x2000_mmc0_1bit, 0), + INGENIC_PIN_GROUP("mmc0-4bit", x2000_mmc0_4bit, 0), + INGENIC_PIN_GROUP("mmc0-8bit", x2000_mmc0_8bit, 0), + INGENIC_PIN_GROUP("mmc1-1bit", x2000_mmc1_1bit, 0), + INGENIC_PIN_GROUP("mmc1-4bit", x2000_mmc1_4bit, 0), + INGENIC_PIN_GROUP("mmc2-1bit", x2000_mmc2_1bit, 0), + INGENIC_PIN_GROUP("mmc2-4bit", x2000_mmc2_4bit, 0), + INGENIC_PIN_GROUP("emc-8bit-data", x2000_emc_8bit_data, 0), + INGENIC_PIN_GROUP("emc-16bit-data", x2000_emc_16bit_data, 0), + INGENIC_PIN_GROUP("emc-addr", x2000_emc_addr, 0), + INGENIC_PIN_GROUP("emc-rd-we", x2000_emc_rd_we, 0), + INGENIC_PIN_GROUP("emc-wait", x2000_emc_wait, 0), + INGENIC_PIN_GROUP("emc-cs1", x2000_emc_cs1, 3), + INGENIC_PIN_GROUP("emc-cs2", x2000_emc_cs2, 3), + INGENIC_PIN_GROUP("i2c0-data", x2000_i2c0, 3), + INGENIC_PIN_GROUP("i2c1-data-c", x2000_i2c1_c, 2), + INGENIC_PIN_GROUP("i2c1-data-d", x2000_i2c1_d, 1), + INGENIC_PIN_GROUP("i2c2-data-b", x2000_i2c2_b, 2), + INGENIC_PIN_GROUP("i2c2-data-d", x2000_i2c2_d, 2), + INGENIC_PIN_GROUP("i2c2-data-e", x2000_i2c2_e, 1), + INGENIC_PIN_GROUP("i2c3-data-a", x2000_i2c3_a, 0), + INGENIC_PIN_GROUP("i2c3-data-d", x2000_i2c3_d, 1), + INGENIC_PIN_GROUP("i2c4-data-c", x2000_i2c4_c, 1), + INGENIC_PIN_GROUP("i2c4-data-d", x2000_i2c4_d, 2), + INGENIC_PIN_GROUP("i2c5-data-c", x2000_i2c5_c, 1), + INGENIC_PIN_GROUP("i2c5-data-d", x2000_i2c5_d, 1), + INGENIC_PIN_GROUP("i2s1-data-tx", x2000_i2s1_data_tx, 2), + INGENIC_PIN_GROUP("i2s1-data-rx", x2000_i2s1_data_rx, 2), + INGENIC_PIN_GROUP("i2s1-clk-tx", x2000_i2s1_clk_tx, 2), + INGENIC_PIN_GROUP("i2s1-clk-rx", x2000_i2s1_clk_rx, 2), + INGENIC_PIN_GROUP("i2s1-sysclk-tx", x2000_i2s1_sysclk_tx, 2), + INGENIC_PIN_GROUP("i2s1-sysclk-rx", x2000_i2s1_sysclk_rx, 2), + INGENIC_PIN_GROUP("i2s2-data-rx0", x2000_i2s2_data_rx0, 2), + INGENIC_PIN_GROUP("i2s2-data-rx1", x2000_i2s2_data_rx1, 2), + INGENIC_PIN_GROUP("i2s2-data-rx2", x2000_i2s2_data_rx2, 2), + INGENIC_PIN_GROUP("i2s2-data-rx3", x2000_i2s2_data_rx3, 2), + INGENIC_PIN_GROUP("i2s2-clk-rx", x2000_i2s2_clk_rx, 2), + INGENIC_PIN_GROUP("i2s2-sysclk-rx", x2000_i2s2_sysclk_rx, 2), + INGENIC_PIN_GROUP("i2s3-data-tx0", x2000_i2s3_data_tx0, 2), + INGENIC_PIN_GROUP("i2s3-data-tx1", x2000_i2s3_data_tx1, 2), + INGENIC_PIN_GROUP("i2s3-data-tx2", x2000_i2s3_data_tx2, 2), + INGENIC_PIN_GROUP("i2s3-data-tx3", x2000_i2s3_data_tx3, 2), + INGENIC_PIN_GROUP("i2s3-clk-tx", x2000_i2s3_clk_tx, 2), + INGENIC_PIN_GROUP("i2s3-sysclk-tx", x2000_i2s3_sysclk_tx, 2), + INGENIC_PIN_GROUP("dmic-if0", x2000_dmic_if0, 0), + INGENIC_PIN_GROUP("dmic-if1", x2000_dmic_if1, 0), + INGENIC_PIN_GROUP("dmic-if2", x2000_dmic_if2, 0), + INGENIC_PIN_GROUP("dmic-if3", x2000_dmic_if3, 0), + INGENIC_PIN_GROUP_FUNCS("cim-data-8bit", x2000_cim_8bit, + x2000_cim_8bit_funcs), + INGENIC_PIN_GROUP("cim-data-12bit", x2000_cim_12bit, 0), + INGENIC_PIN_GROUP("lcd-tft-8bit", x2000_lcd_tft_8bit, 1), + INGENIC_PIN_GROUP("lcd-tft-16bit", x2000_lcd_tft_16bit, 1), + INGENIC_PIN_GROUP("lcd-tft-18bit", x2000_lcd_tft_18bit, 1), + INGENIC_PIN_GROUP("lcd-tft-24bit", x2000_lcd_tft_24bit, 1), + INGENIC_PIN_GROUP("lcd-slcd-8bit", x2000_lcd_slcd_8bit, 2), + INGENIC_PIN_GROUP("lcd-slcd-16bit", x2000_lcd_tft_16bit, 2), + INGENIC_PIN_GROUP("pwm0-c", x2000_pwm_pwm0_c, 0), + INGENIC_PIN_GROUP("pwm0-d", x2000_pwm_pwm0_d, 2), + INGENIC_PIN_GROUP("pwm1-c", x2000_pwm_pwm1_c, 0), + INGENIC_PIN_GROUP("pwm1-d", x2000_pwm_pwm1_d, 2), + INGENIC_PIN_GROUP("pwm2-c", x2000_pwm_pwm2_c, 0), + INGENIC_PIN_GROUP("pwm2-e", x2000_pwm_pwm2_e, 1), + INGENIC_PIN_GROUP("pwm3-c", x2000_pwm_pwm3_c, 0), + INGENIC_PIN_GROUP("pwm3-e", x2000_pwm_pwm3_e, 1), + INGENIC_PIN_GROUP("pwm4-c", x2000_pwm_pwm4_c, 0), + INGENIC_PIN_GROUP("pwm4-e", x2000_pwm_pwm4_e, 1), + INGENIC_PIN_GROUP("pwm5-c", x2000_pwm_pwm5_c, 0), + INGENIC_PIN_GROUP("pwm5-e", x2000_pwm_pwm5_e, 1), + INGENIC_PIN_GROUP("pwm6-c", x2000_pwm_pwm6_c, 0), + INGENIC_PIN_GROUP("pwm6-e", x2000_pwm_pwm6_e, 1), + INGENIC_PIN_GROUP("pwm7-c", x2000_pwm_pwm7_c, 0), + INGENIC_PIN_GROUP("pwm7-e", x2000_pwm_pwm7_e, 1), + INGENIC_PIN_GROUP("pwm8", x2000_pwm_pwm8, 0), + INGENIC_PIN_GROUP("pwm9", x2000_pwm_pwm9, 0), + INGENIC_PIN_GROUP("pwm10", x2000_pwm_pwm10, 0), + INGENIC_PIN_GROUP("pwm11", x2000_pwm_pwm11, 0), + INGENIC_PIN_GROUP("pwm12", x2000_pwm_pwm12, 0), + INGENIC_PIN_GROUP("pwm13", x2000_pwm_pwm13, 0), + INGENIC_PIN_GROUP("pwm14", x2000_pwm_pwm14, 0), + INGENIC_PIN_GROUP("pwm15", x2000_pwm_pwm15, 0), + INGENIC_PIN_GROUP("mac", x2100_mac, 1), +}; + +static const char *x2100_mac_groups[] = { "mac", }; + +static const struct function_desc x2100_functions[] = { + { "uart0", x2000_uart0_groups, ARRAY_SIZE(x2000_uart0_groups), }, + { "uart1", x2000_uart1_groups, ARRAY_SIZE(x2000_uart1_groups), }, + { "uart2", x2000_uart2_groups, ARRAY_SIZE(x2000_uart2_groups), }, + { "uart3", x2000_uart3_groups, ARRAY_SIZE(x2000_uart3_groups), }, + { "uart4", x2000_uart4_groups, ARRAY_SIZE(x2000_uart4_groups), }, + { "uart5", x2000_uart5_groups, ARRAY_SIZE(x2000_uart5_groups), }, + { "uart6", x2000_uart6_groups, ARRAY_SIZE(x2000_uart6_groups), }, + { "uart7", x2000_uart7_groups, ARRAY_SIZE(x2000_uart7_groups), }, + { "uart8", x2000_uart8_groups, ARRAY_SIZE(x2000_uart8_groups), }, + { "uart9", x2000_uart9_groups, ARRAY_SIZE(x2000_uart9_groups), }, + { "sfc", x2000_sfc_groups, ARRAY_SIZE(x2000_sfc_groups), }, + { "ssi0", x2000_ssi0_groups, ARRAY_SIZE(x2000_ssi0_groups), }, + { "ssi1", x2000_ssi1_groups, ARRAY_SIZE(x2000_ssi1_groups), }, + { "mmc0", x2000_mmc0_groups, ARRAY_SIZE(x2000_mmc0_groups), }, + { "mmc1", x2000_mmc1_groups, ARRAY_SIZE(x2000_mmc1_groups), }, + { "mmc2", x2000_mmc2_groups, ARRAY_SIZE(x2000_mmc2_groups), }, + { "emc", x2000_emc_groups, ARRAY_SIZE(x2000_emc_groups), }, + { "emc-cs1", x2000_cs1_groups, ARRAY_SIZE(x2000_cs1_groups), }, + { "emc-cs2", x2000_cs2_groups, ARRAY_SIZE(x2000_cs2_groups), }, + { "i2c0", x2000_i2c0_groups, ARRAY_SIZE(x2000_i2c0_groups), }, + { "i2c1", x2000_i2c1_groups, ARRAY_SIZE(x2000_i2c1_groups), }, + { "i2c2", x2000_i2c2_groups, ARRAY_SIZE(x2000_i2c2_groups), }, + { "i2c3", x2000_i2c3_groups, ARRAY_SIZE(x2000_i2c3_groups), }, + { "i2c4", x2000_i2c4_groups, ARRAY_SIZE(x2000_i2c4_groups), }, + { "i2c5", x2000_i2c5_groups, ARRAY_SIZE(x2000_i2c5_groups), }, + { "i2s1", x2000_i2s1_groups, ARRAY_SIZE(x2000_i2s1_groups), }, + { "i2s2", x2000_i2s2_groups, ARRAY_SIZE(x2000_i2s2_groups), }, + { "i2s3", x2000_i2s3_groups, ARRAY_SIZE(x2000_i2s3_groups), }, + { "dmic", x2000_dmic_groups, ARRAY_SIZE(x2000_dmic_groups), }, + { "cim", x2000_cim_groups, ARRAY_SIZE(x2000_cim_groups), }, + { "lcd", x2000_lcd_groups, ARRAY_SIZE(x2000_lcd_groups), }, + { "pwm0", x2000_pwm0_groups, ARRAY_SIZE(x2000_pwm0_groups), }, + { "pwm1", x2000_pwm1_groups, ARRAY_SIZE(x2000_pwm1_groups), }, + { "pwm2", x2000_pwm2_groups, ARRAY_SIZE(x2000_pwm2_groups), }, + { "pwm3", x2000_pwm3_groups, ARRAY_SIZE(x2000_pwm3_groups), }, + { "pwm4", x2000_pwm4_groups, ARRAY_SIZE(x2000_pwm4_groups), }, + { "pwm5", x2000_pwm5_groups, ARRAY_SIZE(x2000_pwm5_groups), }, + { "pwm6", x2000_pwm6_groups, ARRAY_SIZE(x2000_pwm6_groups), }, + { "pwm7", x2000_pwm7_groups, ARRAY_SIZE(x2000_pwm7_groups), }, + { "pwm8", x2000_pwm8_groups, ARRAY_SIZE(x2000_pwm8_groups), }, + { "pwm9", x2000_pwm9_groups, ARRAY_SIZE(x2000_pwm9_groups), }, + { "pwm10", x2000_pwm10_groups, ARRAY_SIZE(x2000_pwm10_groups), }, + { "pwm11", x2000_pwm11_groups, ARRAY_SIZE(x2000_pwm11_groups), }, + { "pwm12", x2000_pwm12_groups, ARRAY_SIZE(x2000_pwm12_groups), }, + { "pwm13", x2000_pwm13_groups, ARRAY_SIZE(x2000_pwm13_groups), }, + { "pwm14", x2000_pwm14_groups, ARRAY_SIZE(x2000_pwm14_groups), }, + { "pwm15", x2000_pwm15_groups, ARRAY_SIZE(x2000_pwm15_groups), }, + { "mac", x2100_mac_groups, ARRAY_SIZE(x2100_mac_groups), }, +}; + +static const struct ingenic_chip_info x2100_chip_info = { + .num_chips = 5, + .reg_offset = 0x100, + .version = ID_X2100, + .groups = x2100_groups, + .num_groups = ARRAY_SIZE(x2100_groups), + .functions = x2100_functions, + .num_functions = ARRAY_SIZE(x2100_functions), + .pull_ups = x2100_pull_ups, + .pull_downs = x2100_pull_downs, +}; + static u32 ingenic_gpio_read_reg(struct ingenic_gpio_chip *jzgc, u8 reg) { unsigned int val; @@ -3441,17 +3830,17 @@ static void ingenic_set_bias(struct ingenic_pinctrl *jzpc, { if (jzpc->info->version >= ID_X2000) { switch (bias) { - case PIN_CONFIG_BIAS_PULL_UP: + case GPIO_PULL_UP: ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false); ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, true); break; - case PIN_CONFIG_BIAS_PULL_DOWN: + case GPIO_PULL_DOWN: ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, false); ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, true); break; - case PIN_CONFIG_BIAS_DISABLE: + case GPIO_PULL_DIS: default: ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPU, false); ingenic_config_pin(jzpc, pin, X2000_GPIO_PEPD, false); @@ -3654,19 +4043,20 @@ static const struct regmap_config ingenic_pinctrl_regmap_config = { .reg_stride = 4, }; -static const struct of_device_id ingenic_gpio_of_match[] __initconst = { - { .compatible = "ingenic,jz4730-gpio", }, - { .compatible = "ingenic,jz4740-gpio", }, - { .compatible = "ingenic,jz4725b-gpio", }, - { .compatible = "ingenic,jz4750-gpio", }, - { .compatible = "ingenic,jz4755-gpio", }, - { .compatible = "ingenic,jz4760-gpio", }, - { .compatible = "ingenic,jz4770-gpio", }, - { .compatible = "ingenic,jz4775-gpio", }, - { .compatible = "ingenic,jz4780-gpio", }, - { .compatible = "ingenic,x1000-gpio", }, - { .compatible = "ingenic,x1830-gpio", }, - { .compatible = "ingenic,x2000-gpio", }, +static const struct of_device_id ingenic_gpio_of_matches[] __initconst = { + { .compatible = "ingenic,jz4730-gpio" }, + { .compatible = "ingenic,jz4740-gpio" }, + { .compatible = "ingenic,jz4725b-gpio" }, + { .compatible = "ingenic,jz4750-gpio" }, + { .compatible = "ingenic,jz4755-gpio" }, + { .compatible = "ingenic,jz4760-gpio" }, + { .compatible = "ingenic,jz4770-gpio" }, + { .compatible = "ingenic,jz4775-gpio" }, + { .compatible = "ingenic,jz4780-gpio" }, + { .compatible = "ingenic,x1000-gpio" }, + { .compatible = "ingenic,x1830-gpio" }, + { .compatible = "ingenic,x2000-gpio" }, + { .compatible = "ingenic,x2100-gpio" }, {}, }; @@ -3759,6 +4149,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) void __iomem *base; const struct ingenic_chip_info *chip_info; struct device_node *node; + struct regmap_config regmap_config; unsigned int i; int err; @@ -3776,8 +4167,10 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) if (IS_ERR(base)) return PTR_ERR(base); - jzpc->map = devm_regmap_init_mmio(dev, base, - &ingenic_pinctrl_regmap_config); + regmap_config = ingenic_pinctrl_regmap_config; + regmap_config.max_register = chip_info->num_chips * chip_info->reg_offset; + + jzpc->map = devm_regmap_init_mmio(dev, base, ®map_config); if (IS_ERR(jzpc->map)) { dev_err(dev, "Failed to create regmap\n"); return PTR_ERR(jzpc->map); @@ -3843,7 +4236,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) dev_set_drvdata(dev, jzpc->map); for_each_child_of_node(dev->of_node, node) { - if (of_match_node(ingenic_gpio_of_match, node)) { + if (of_match_node(ingenic_gpio_of_matches, node)) { err = ingenic_gpio_probe(jzpc, node); if (err) { of_node_put(node); @@ -3857,7 +4250,7 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev) #define IF_ENABLED(cfg, ptr) PTR_IF(IS_ENABLED(cfg), (ptr)) -static const struct of_device_id ingenic_pinctrl_of_match[] = { +static const struct of_device_id ingenic_pinctrl_of_matches[] = { { .compatible = "ingenic,jz4730-pinctrl", .data = IF_ENABLED(CONFIG_MACH_JZ4730, &jz4730_chip_info) @@ -3922,13 +4315,17 @@ static const struct of_device_id ingenic_pinctrl_of_match[] = { .compatible = "ingenic,x2000e-pinctrl", .data = IF_ENABLED(CONFIG_MACH_X2000, &x2000_chip_info) }, + { + .compatible = "ingenic,x2100-pinctrl", + .data = IF_ENABLED(CONFIG_MACH_X2100, &x2100_chip_info) + }, { /* sentinel */ }, }; static struct platform_driver ingenic_pinctrl_driver = { .driver = { .name = "pinctrl-ingenic", - .of_match_table = ingenic_pinctrl_of_match, + .of_match_table = ingenic_pinctrl_of_matches, }, }; diff --git a/drivers/pinctrl/pinctrl-keembay.c b/drivers/pinctrl/pinctrl-keembay.c new file mode 100644 index 000000000000..2bce563d5b8b --- /dev/null +++ b/drivers/pinctrl/pinctrl-keembay.c @@ -0,0 +1,1731 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (C) 2020 Intel Corporation */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> + +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include <linux/platform_device.h> + +#include "core.h" +#include "pinmux.h" + +/* GPIO data registers' offsets */ +#define KEEMBAY_GPIO_DATA_OUT 0x000 +#define KEEMBAY_GPIO_DATA_IN 0x020 +#define KEEMBAY_GPIO_DATA_IN_RAW 0x040 +#define KEEMBAY_GPIO_DATA_HIGH 0x060 +#define KEEMBAY_GPIO_DATA_LOW 0x080 + +/* GPIO Interrupt and mode registers' offsets */ +#define KEEMBAY_GPIO_INT_CFG 0x000 +#define KEEMBAY_GPIO_MODE 0x070 + +/* GPIO mode register bit fields */ +#define KEEMBAY_GPIO_MODE_PULLUP_MASK GENMASK(13, 12) +#define KEEMBAY_GPIO_MODE_DRIVE_MASK GENMASK(8, 7) +#define KEEMBAY_GPIO_MODE_INV_MASK GENMASK(5, 4) +#define KEEMBAY_GPIO_MODE_SELECT_MASK GENMASK(2, 0) +#define KEEMBAY_GPIO_MODE_DIR_OVR BIT(15) +#define KEEMBAY_GPIO_MODE_REN BIT(11) +#define KEEMBAY_GPIO_MODE_SCHMITT_EN BIT(10) +#define KEEMBAY_GPIO_MODE_SLEW_RATE BIT(9) +#define KEEMBAY_GPIO_IRQ_ENABLE BIT(7) +#define KEEMBAY_GPIO_MODE_DIR BIT(3) +#define KEEMBAY_GPIO_MODE_DEFAULT 0x7 +#define KEEMBAY_GPIO_MODE_INV_VAL 0x3 + +#define KEEMBAY_GPIO_DISABLE 0 +#define KEEMBAY_GPIO_PULL_UP 1 +#define KEEMBAY_GPIO_PULL_DOWN 2 +#define KEEMBAY_GPIO_BUS_HOLD 3 +#define KEEMBAY_GPIO_NUM_IRQ 8 +#define KEEMBAY_GPIO_MAX_PER_IRQ 4 +#define KEEMBAY_GPIO_MAX_PER_REG 32 +#define KEEMBAY_GPIO_MIN_STRENGTH 2 +#define KEEMBAY_GPIO_MAX_STRENGTH 12 +#define KEEMBAY_GPIO_SENSE_LOW (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING) + +/* GPIO reg address calculation */ +#define KEEMBAY_GPIO_REG_OFFSET(pin) ((pin) * 4) + +/** + * struct keembay_mux_desc - Mux properties of each GPIO pin + * @mode: Pin mode when operating in this function + * @name: Pin function name + */ +struct keembay_mux_desc { + u8 mode; + const char *name; +}; + +#define KEEMBAY_PIN_DESC(pin_number, pin_name, ...) { \ + .number = pin_number, \ + .name = pin_name, \ + .drv_data = &(struct keembay_mux_desc[]) { \ + __VA_ARGS__, { } }, \ +} \ + +#define KEEMBAY_MUX(pin_mode, pin_function) { \ + .mode = pin_mode, \ + .name = pin_function, \ +} \ + +/** + * struct keembay_gpio_irq - Config of each GPIO Interrupt sources + * @source: Interrupt source number (0 - 7) + * @line: Actual Interrupt line number + * @pins: Array of GPIO pins using this Interrupt line + * @trigger: Interrupt trigger type for this line + * @num_share: Number of pins currently using this Interrupt line + */ +struct keembay_gpio_irq { + unsigned int source; + unsigned int line; + unsigned int pins[KEEMBAY_GPIO_MAX_PER_IRQ]; + unsigned int trigger; + unsigned int num_share; +}; + +/** + * struct keembay_pinctrl - Intel Keembay pinctrl structure + * @pctrl: Pointer to the pin controller device + * @base0: First register base address + * @base1: Second register base address + * @dev: Pointer to the device structure + * @chip: GPIO chip used by this pin controller + * @soc: Pin control configuration data based on SoC + * @lock: Spinlock to protect various gpio config register access + * @ngroups: Number of pin groups available + * @nfuncs: Number of pin functions available + * @npins: Number of GPIO pins available + * @irq: Store Interrupt source + * @max_gpios_level_type: Store max level trigger type + * @max_gpios_edge_type: Store max edge trigger type + */ +struct keembay_pinctrl { + struct pinctrl_dev *pctrl; + void __iomem *base0; + void __iomem *base1; + struct device *dev; + struct gpio_chip chip; + const struct keembay_pin_soc *soc; + raw_spinlock_t lock; + unsigned int ngroups; + unsigned int nfuncs; + unsigned int npins; + struct keembay_gpio_irq irq[KEEMBAY_GPIO_NUM_IRQ]; + int max_gpios_level_type; + int max_gpios_edge_type; +}; + +/** + * struct keembay_pin_soc - Pin control config data based on SoC + * @pins: Pin description structure + */ +struct keembay_pin_soc { + const struct pinctrl_pin_desc *pins; +}; + +static const struct pinctrl_pin_desc keembay_pins[] = { + KEEMBAY_PIN_DESC(0, "GPIO0", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(1, "GPIO1", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(2, "GPIO2", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(3, "GPIO3", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(4, "GPIO4", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C2_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(5, "GPIO5", + KEEMBAY_MUX(0x0, "I2S0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C2_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(6, "GPIO6", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C3_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(7, "GPIO7", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "I2C3_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(8, "GPIO8", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "SLVDS0_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(9, "GPIO9", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(10, "GPIO10", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(11, "GPIO11", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SD0_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "UART0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(12, "GPIO12", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "I2S2_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SPI0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(13, "GPIO13", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "I2S2_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SPI0_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(14, "GPIO14", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "PWM_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "ETH_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(15, "GPIO15", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(16, "GPIO16", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(17, "GPIO17", + KEEMBAY_MUX(0x0, "UART0_M0"), + KEEMBAY_MUX(0x1, "I2S3_M1"), + KEEMBAY_MUX(0x2, "I2S3_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(18, "GPIO18", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "I2S3_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(19, "GPIO19", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "SD1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "LCD_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(20, "GPIO20", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "SPI1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(21, "GPIO21", + KEEMBAY_MUX(0x0, "UART1_M0"), + KEEMBAY_MUX(0x1, "LCD_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(22, "GPIO22", + KEEMBAY_MUX(0x0, "I2C0_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(23, "GPIO23", + KEEMBAY_MUX(0x0, "I2C0_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(24, "GPIO24", + KEEMBAY_MUX(0x0, "I2C1_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "DEBUG_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(25, "GPIO25", + KEEMBAY_MUX(0x0, "I2C1_M0"), + KEEMBAY_MUX(0x1, "UART2_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(26, "GPIO26", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "DSU_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(27, "GPIO27", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "DSU_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C0_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(28, "GPIO28", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C1_M5"), + KEEMBAY_MUX(0x6, "SLVDS0_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(29, "GPIO29", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2C3_M1"), + KEEMBAY_MUX(0x2, "UART0_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I3C2_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(30, "GPIO30", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "I2C4_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(31, "GPIO31", + KEEMBAY_MUX(0x0, "SPI0_M0"), + KEEMBAY_MUX(0x1, "I2S0_M1"), + KEEMBAY_MUX(0x2, "I2C4_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "UART1_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(32, "GPIO32", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "UART1_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "PCIE_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(33, "GPIO33", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "UART1_M2"), + KEEMBAY_MUX(0x3, "PWM_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "PCIE_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(34, "GPIO34", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI0_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "UART1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(35, "GPIO35", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "PCIE_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "UART1_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(36, "GPIO36", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(37, "GPIO37", + KEEMBAY_MUX(0x0, "SD0_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "I2S0_M5"), + KEEMBAY_MUX(0x6, "SLVDS1_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(38, "GPIO38", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(39, "GPIO39", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(40, "GPIO40", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "UART3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(41, "GPIO41", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI3_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "DEBUG_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(42, "GPIO42", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "CAM_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C4_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(43, "GPIO43", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI3_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2C4_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(44, "GPIO44", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(45, "GPIO45", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "CPR_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(46, "GPIO46", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(47, "GPIO47", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SD1_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(48, "GPIO48", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(49, "GPIO49", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(50, "GPIO50", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(51, "GPIO51", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "UART2_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(52, "GPIO52", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(53, "GPIO53", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(54, "GPIO54", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(55, "GPIO55", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(56, "GPIO56", + KEEMBAY_MUX(0x0, "ETH_M0"), + KEEMBAY_MUX(0x1, "SPI2_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I2S2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(57, "GPIO57", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "I2S1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(58, "GPIO58", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(59, "GPIO59", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(60, "GPIO60", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I3C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(61, "GPIO61", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(62, "GPIO62", + KEEMBAY_MUX(0x0, "SPI1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(63, "GPIO63", + KEEMBAY_MUX(0x0, "I2S1_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(64, "GPIO64", + KEEMBAY_MUX(0x0, "I2S2_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "ETH_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "UART1_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(65, "GPIO65", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "SPI1_M1"), + KEEMBAY_MUX(0x2, "SD1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(66, "GPIO66", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "CAM_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(67, "GPIO67", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(68, "GPIO68", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(69, "GPIO69", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "I2C1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SPI0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(70, "GPIO70", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SPI0_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(71, "GPIO71", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "I2S3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(72, "GPIO72", + KEEMBAY_MUX(0x0, "I3C1_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(73, "GPIO73", + KEEMBAY_MUX(0x0, "I3C2_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(74, "GPIO74", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(75, "GPIO75", + KEEMBAY_MUX(0x0, "I3C0_M0"), + KEEMBAY_MUX(0x1, "ETH_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "SD0_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART2_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(76, "GPIO76", + KEEMBAY_MUX(0x0, "I2C2_M0"), + KEEMBAY_MUX(0x1, "I3C0_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "ETH_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(77, "GPIO77", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I3C1_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(78, "GPIO78", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I3C2_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), + KEEMBAY_PIN_DESC(79, "GPIO79", + KEEMBAY_MUX(0x0, "PCIE_M0"), + KEEMBAY_MUX(0x1, "I2C2_M1"), + KEEMBAY_MUX(0x2, "SLVDS1_M2"), + KEEMBAY_MUX(0x3, "TPIU_M3"), + KEEMBAY_MUX(0x4, "I3C2_M4"), + KEEMBAY_MUX(0x5, "LCD_M5"), + KEEMBAY_MUX(0x6, "UART3_M6"), + KEEMBAY_MUX(0x7, "GPIO_M7")), +}; + +static inline u32 keembay_read_reg(void __iomem *base, unsigned int pin) +{ + return readl(base + KEEMBAY_GPIO_REG_OFFSET(pin)); +} + +static inline u32 keembay_read_gpio_reg(void __iomem *base, unsigned int pin) +{ + return keembay_read_reg(base, pin / KEEMBAY_GPIO_MAX_PER_REG); +} + +static inline u32 keembay_read_pin(void __iomem *base, unsigned int pin) +{ + u32 val = keembay_read_gpio_reg(base, pin); + + return !!(val & BIT(pin % KEEMBAY_GPIO_MAX_PER_REG)); +} + +static inline void keembay_write_reg(u32 val, void __iomem *base, unsigned int pin) +{ + writel(val, base + KEEMBAY_GPIO_REG_OFFSET(pin)); +} + +static inline void keembay_write_gpio_reg(u32 val, void __iomem *base, unsigned int pin) +{ + keembay_write_reg(val, base, pin / KEEMBAY_GPIO_MAX_PER_REG); +} + +static void keembay_gpio_invert(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + /* + * This IP doesn't support the falling edge and low level interrupt + * trigger. Invert API is used to mimic the falling edge and low + * level support + */ + + val |= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, KEEMBAY_GPIO_MODE_INV_VAL); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); +} + +static void keembay_gpio_restore_default(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val &= FIELD_PREP(KEEMBAY_GPIO_MODE_INV_MASK, 0); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); +} + +static int keembay_request_gpio(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, unsigned int pin) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int val; + + if (pin >= kpc->npins) + return -EINVAL; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val = FIELD_GET(KEEMBAY_GPIO_MODE_SELECT_MASK, val); + + /* As per Pin Mux Map, Modes 0 to 6 are for peripherals */ + if (val != KEEMBAY_GPIO_MODE_DEFAULT) + return -EBUSY; + + return 0; +} + +static int keembay_set_mux(struct pinctrl_dev *pctldev, unsigned int fun_sel, + unsigned int grp_sel) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + struct function_desc *func; + struct group_desc *grp; + unsigned int val; + u8 pin_mode; + int pin; + + grp = pinctrl_generic_get_group(pctldev, grp_sel); + if (!grp) + return -EINVAL; + + func = pinmux_generic_get_function(pctldev, fun_sel); + if (!func) + return -EINVAL; + + /* Change modes for pins in the selected group */ + pin = *grp->pins; + pin_mode = *(u8 *)(func->data); + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val = u32_replace_bits(val, pin_mode, KEEMBAY_GPIO_MODE_SELECT_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static u32 keembay_pinconf_get_pull(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return FIELD_GET(KEEMBAY_GPIO_MODE_PULLUP_MASK, val); +} + +static int keembay_pinconf_set_pull(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int pull) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val = u32_replace_bits(val, pull, KEEMBAY_GPIO_MODE_PULLUP_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_drive(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + val = FIELD_GET(KEEMBAY_GPIO_MODE_DRIVE_MASK, val) * 4; + if (val) + return val; + + return KEEMBAY_GPIO_MIN_STRENGTH; +} + +static int keembay_pinconf_set_drive(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int drive) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + unsigned int strength = clamp_val(drive, KEEMBAY_GPIO_MIN_STRENGTH, + KEEMBAY_GPIO_MAX_STRENGTH) / 4; + + val = u32_replace_bits(val, strength, KEEMBAY_GPIO_MODE_DRIVE_MASK); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_SLEW_RATE); +} + +static int keembay_pinconf_set_slew_rate(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int slew_rate) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + if (slew_rate) + val |= KEEMBAY_GPIO_MODE_SLEW_RATE; + else + val &= ~KEEMBAY_GPIO_MODE_SLEW_RATE; + + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get_schmitt(struct keembay_pinctrl *kpc, unsigned int pin) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_SCHMITT_EN); +} + +static int keembay_pinconf_set_schmitt(struct keembay_pinctrl *kpc, unsigned int pin, + unsigned int schmitt_en) +{ + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + if (schmitt_en) + val |= KEEMBAY_GPIO_MODE_SCHMITT_EN; + else + val &= ~KEEMBAY_GPIO_MODE_SCHMITT_EN; + + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *cfg) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + unsigned int param = pinconf_to_config_param(*cfg); + unsigned int val; + + if (pin >= kpc->npins) + return -EINVAL; + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_DISABLE) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_UP: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_UP) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_PULL_DOWN) + return -EINVAL; + break; + + case PIN_CONFIG_BIAS_BUS_HOLD: + if (keembay_pinconf_get_pull(kpc, pin) != KEEMBAY_GPIO_BUS_HOLD) + return -EINVAL; + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!keembay_pinconf_get_schmitt(kpc, pin)) + return -EINVAL; + break; + + case PIN_CONFIG_SLEW_RATE: + val = keembay_pinconf_get_slew_rate(kpc, pin); + *cfg = pinconf_to_config_packed(param, val); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + val = keembay_pinconf_get_drive(kpc, pin); + *cfg = pinconf_to_config_packed(param, val); + break; + + default: + return -ENOTSUPP; + } + + return 0; +} + +static int keembay_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, + unsigned long *cfg, unsigned int num_configs) +{ + struct keembay_pinctrl *kpc = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param; + unsigned int arg, i; + int ret = 0; + + if (pin >= kpc->npins) + return -EINVAL; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(cfg[i]); + arg = pinconf_to_config_argument(cfg[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_DISABLE); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_UP); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_PULL_DOWN); + break; + + case PIN_CONFIG_BIAS_BUS_HOLD: + ret = keembay_pinconf_set_pull(kpc, pin, KEEMBAY_GPIO_BUS_HOLD); + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + ret = keembay_pinconf_set_schmitt(kpc, pin, arg); + break; + + case PIN_CONFIG_SLEW_RATE: + ret = keembay_pinconf_set_slew_rate(kpc, pin, arg); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + ret = keembay_pinconf_set_drive(kpc, pin, arg); + break; + + default: + return -ENOTSUPP; + } + if (ret) + return ret; + } + return ret; +} + +static const struct pinctrl_ops keembay_pctlops = { + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, + .dt_node_to_map = pinconf_generic_dt_node_to_map_all, + .dt_free_map = pinconf_generic_dt_free_map, +}; + +static const struct pinmux_ops keembay_pmxops = { + .get_functions_count = pinmux_generic_get_function_count, + .get_function_name = pinmux_generic_get_function_name, + .get_function_groups = pinmux_generic_get_function_groups, + .gpio_request_enable = keembay_request_gpio, + .set_mux = keembay_set_mux, +}; + +static const struct pinconf_ops keembay_confops = { + .is_generic = true, + .pin_config_get = keembay_pinconf_get, + .pin_config_set = keembay_pinconf_set, +}; + +static struct pinctrl_desc keembay_pinctrl_desc = { + .name = "keembay-pinmux", + .pctlops = &keembay_pctlops, + .pmxops = &keembay_pmxops, + .confops = &keembay_confops, + .owner = THIS_MODULE, +}; + +static int keembay_gpio_get(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val, offset; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + offset = (val & KEEMBAY_GPIO_MODE_DIR) ? KEEMBAY_GPIO_DATA_IN : KEEMBAY_GPIO_DATA_OUT; + + return keembay_read_pin(kpc->base0 + offset, pin); +} + +static void keembay_gpio_set(struct gpio_chip *gc, unsigned int pin, int val) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int reg_val; + + reg_val = keembay_read_gpio_reg(kpc->base0 + KEEMBAY_GPIO_DATA_OUT, pin); + if (val) + keembay_write_gpio_reg(reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), + kpc->base0 + KEEMBAY_GPIO_DATA_HIGH, pin); + else + keembay_write_gpio_reg(~reg_val | BIT(pin % KEEMBAY_GPIO_MAX_PER_REG), + kpc->base0 + KEEMBAY_GPIO_DATA_LOW, pin); +} + +static int keembay_gpio_get_direction(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return !!(val & KEEMBAY_GPIO_MODE_DIR); +} + +static int keembay_gpio_set_direction_in(struct gpio_chip *gc, unsigned int pin) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val |= KEEMBAY_GPIO_MODE_DIR; + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + + return 0; +} + +static int keembay_gpio_set_direction_out(struct gpio_chip *gc, + unsigned int pin, int value) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int val; + + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_MODE, pin); + val &= ~KEEMBAY_GPIO_MODE_DIR; + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_MODE, pin); + keembay_gpio_set(gc, pin, value); + + return 0; +} + +static void keembay_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *gc = irq_desc_get_handler_data(desc); + unsigned int kmb_irq = irq_desc_get_irq(desc); + unsigned long reg, clump = 0, bit = 0; + struct irq_chip *parent_chip; + struct keembay_pinctrl *kpc; + unsigned int src, pin, val; + + /* Identify GPIO interrupt number from GIC interrupt number */ + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + if (kmb_irq == gc->irq.parents[src]) + break; + } + + if (src == KEEMBAY_GPIO_NUM_IRQ) + return; + + parent_chip = irq_desc_get_chip(desc); + kpc = gpiochip_get_data(gc); + + chained_irq_enter(parent_chip, desc); + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + /* + * Each Interrupt line can be shared by up to 4 GPIO pins. Enable bit + * and input values were checked to identify the source of the + * Interrupt. The checked enable bit positions are 7, 15, 23 and 31. + */ + for_each_set_clump8(bit, clump, ®, BITS_PER_TYPE(typeof(reg))) { + pin = clump & ~KEEMBAY_GPIO_IRQ_ENABLE; + val = keembay_read_pin(kpc->base0 + KEEMBAY_GPIO_DATA_IN, pin); + kmb_irq = irq_linear_revmap(gc->irq.domain, pin); + + /* Checks if the interrupt is enabled */ + if (val && (clump & KEEMBAY_GPIO_IRQ_ENABLE)) + generic_handle_irq(kmb_irq); + } + chained_irq_exit(parent_chip, desc); +} + +static void keembay_gpio_clear_irq(struct irq_data *data, unsigned long pos, + u32 src, irq_hw_number_t pin) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned long trig = irqd_get_trigger_type(data); + struct keembay_gpio_irq *irq = &kpc->irq[src]; + unsigned long val; + + /* Check if the value of pos/KEEMBAY_GPIO_NUM_IRQ is in valid range. */ + if ((pos / KEEMBAY_GPIO_NUM_IRQ) >= KEEMBAY_GPIO_MAX_PER_IRQ) + return; + + /* Retains val register as it handles other interrupts as well. */ + val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + bitmap_set_value8(&val, 0, pos); + keembay_write_reg(val, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + irq->num_share--; + irq->pins[pos / KEEMBAY_GPIO_NUM_IRQ] = 0; + + if (trig & IRQ_TYPE_LEVEL_MASK) + keembay_gpio_restore_default(kpc, pin); + + if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) + kpc->max_gpios_level_type++; + else if (irq->trigger == IRQ_TYPE_EDGE_RISING) + kpc->max_gpios_edge_type++; +} + +static int keembay_find_free_slot(struct keembay_pinctrl *kpc, unsigned int src) +{ + unsigned long val = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + + return bitmap_find_free_region(&val, KEEMBAY_GPIO_MAX_PER_REG, 3) / KEEMBAY_GPIO_NUM_IRQ; +} + +static int keembay_find_free_src(struct keembay_pinctrl *kpc, unsigned int trig) +{ + int src, type = 0; + + if (trig & IRQ_TYPE_LEVEL_MASK) + type = IRQ_TYPE_LEVEL_HIGH; + else if (trig & IRQ_TYPE_EDGE_BOTH) + type = IRQ_TYPE_EDGE_RISING; + + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + if (kpc->irq[src].trigger != type) + continue; + + if (!keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src) || + kpc->irq[src].num_share < KEEMBAY_GPIO_MAX_PER_IRQ) + return src; + } + + return -EBUSY; +} + +static void keembay_gpio_set_irq(struct keembay_pinctrl *kpc, int src, + int slot, irq_hw_number_t pin) +{ + unsigned long val = pin | KEEMBAY_GPIO_IRQ_ENABLE; + struct keembay_gpio_irq *irq = &kpc->irq[src]; + unsigned long flags, reg; + + raw_spin_lock_irqsave(&kpc->lock, flags); + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + bitmap_set_value8(®, val, slot * 8); + keembay_write_reg(reg, kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + raw_spin_unlock_irqrestore(&kpc->lock, flags); + + if (irq->trigger == IRQ_TYPE_LEVEL_HIGH) + kpc->max_gpios_level_type--; + else if (irq->trigger == IRQ_TYPE_EDGE_RISING) + kpc->max_gpios_edge_type--; + + irq->source = src; + irq->pins[slot] = pin; + irq->num_share++; +} + +static void keembay_gpio_irq_enable(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + unsigned int trig = irqd_get_trigger_type(data); + irq_hw_number_t pin = irqd_to_hwirq(data); + int src, slot; + + /* Check which Interrupt source and slot is available */ + src = keembay_find_free_src(kpc, trig); + slot = keembay_find_free_slot(kpc, src); + + if (src < 0 || slot < 0) + return; + + if (trig & KEEMBAY_GPIO_SENSE_LOW) + keembay_gpio_invert(kpc, pin); + + keembay_gpio_set_irq(kpc, src, slot, pin); +} + +static void keembay_gpio_irq_ack(struct irq_data *data) +{ + /* + * The keembay_gpio_irq_ack function is needed to handle_edge_irq. + * IRQ ack is not possible from the SOC perspective. The IP by itself + * is used for handling interrupts which do not come in short-time and + * not used as protocol or communication interrupts. All the interrupts + * are threaded IRQ interrupts. But this function is expected to be + * present as the gpio IP is registered with irq framework. Otherwise + * handle_edge_irq() fails. + */ +} + +static void keembay_gpio_irq_disable(struct irq_data *data) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + irq_hw_number_t pin = irqd_to_hwirq(data); + unsigned long reg, clump = 0, pos = 0; + unsigned int src; + + for (src = 0; src < KEEMBAY_GPIO_NUM_IRQ; src++) { + reg = keembay_read_reg(kpc->base1 + KEEMBAY_GPIO_INT_CFG, src); + for_each_set_clump8(pos, clump, ®, BITS_PER_TYPE(typeof(reg))) { + if ((clump & ~KEEMBAY_GPIO_IRQ_ENABLE) == pin) { + keembay_gpio_clear_irq(data, pos, src, pin); + return; + } + } + } +} + +static int keembay_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(data); + struct keembay_pinctrl *kpc = gpiochip_get_data(gc); + + /* Change EDGE_BOTH as EDGE_RISING in order to claim the IRQ for power button */ + if (!kpc->max_gpios_edge_type && (type & IRQ_TYPE_EDGE_BOTH)) + type = IRQ_TYPE_EDGE_RISING; + + if (!kpc->max_gpios_level_type && (type & IRQ_TYPE_LEVEL_MASK)) + type = IRQ_TYPE_NONE; + + if (type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(data, handle_edge_irq); + else if (type & IRQ_TYPE_LEVEL_MASK) + irq_set_handler_locked(data, handle_level_irq); + else + return -EINVAL; + + return 0; +} + +static int keembay_gpio_add_pin_ranges(struct gpio_chip *chip) +{ + struct keembay_pinctrl *kpc = gpiochip_get_data(chip); + int ret; + + ret = gpiochip_add_pin_range(chip, dev_name(kpc->dev), 0, 0, chip->ngpio); + if (ret) + dev_err_probe(kpc->dev, ret, "failed to add GPIO pin range\n"); + return ret; +} + +static struct irq_chip keembay_gpio_irqchip = { + .name = "keembay-gpio", + .irq_enable = keembay_gpio_irq_enable, + .irq_disable = keembay_gpio_irq_disable, + .irq_set_type = keembay_gpio_irq_set_type, + .irq_ack = keembay_gpio_irq_ack, +}; + +static int keembay_gpiochip_probe(struct keembay_pinctrl *kpc, + struct platform_device *pdev) +{ + unsigned int i, level_line = 0, edge_line = 0; + struct gpio_chip *gc = &kpc->chip; + struct gpio_irq_chip *girq; + + /* Setup GPIO IRQ chip */ + girq = &kpc->chip.irq; + girq->chip = &keembay_gpio_irqchip; + girq->parent_handler = keembay_gpio_irq_handler; + girq->num_parents = KEEMBAY_GPIO_NUM_IRQ; + girq->parents = devm_kcalloc(kpc->dev, girq->num_parents, + sizeof(*girq->parents), GFP_KERNEL); + + if (!girq->parents) + return -ENOMEM; + + /* Setup GPIO chip */ + gc->label = dev_name(kpc->dev); + gc->parent = kpc->dev; + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->get_direction = keembay_gpio_get_direction; + gc->direction_input = keembay_gpio_set_direction_in; + gc->direction_output = keembay_gpio_set_direction_out; + gc->get = keembay_gpio_get; + gc->set = keembay_gpio_set; + gc->set_config = gpiochip_generic_config; + gc->base = -1; + gc->ngpio = kpc->npins; + gc->add_pin_ranges = keembay_gpio_add_pin_ranges; + + for (i = 0; i < KEEMBAY_GPIO_NUM_IRQ; i++) { + struct keembay_gpio_irq *kmb_irq = &kpc->irq[i]; + int irq; + + irq = platform_get_irq_optional(pdev, i); + if (irq <= 0) + continue; + + girq->parents[i] = irq; + kmb_irq->line = girq->parents[i]; + kmb_irq->source = i; + kmb_irq->trigger = irq_get_trigger_type(girq->parents[i]); + kmb_irq->num_share = 0; + + if (kmb_irq->trigger == IRQ_TYPE_LEVEL_HIGH) + level_line++; + else + edge_line++; + } + + kpc->max_gpios_level_type = level_line * KEEMBAY_GPIO_MAX_PER_IRQ; + kpc->max_gpios_edge_type = edge_line * KEEMBAY_GPIO_MAX_PER_IRQ; + + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_bad_irq; + + return devm_gpiochip_add_data(kpc->dev, gc, kpc); +} + +static int keembay_build_groups(struct keembay_pinctrl *kpc) +{ + struct group_desc *grp; + unsigned int i; + + kpc->ngroups = kpc->npins; + grp = devm_kcalloc(kpc->dev, kpc->ngroups, sizeof(*grp), GFP_KERNEL); + if (!grp) + return -ENOMEM; + + /* Each pin is categorised as one group */ + for (i = 0; i < kpc->ngroups; i++) { + const struct pinctrl_pin_desc *pdesc = keembay_pins + i; + struct group_desc *kmb_grp = grp + i; + + kmb_grp->name = pdesc->name; + kmb_grp->pins = (int *)&pdesc->number; + pinctrl_generic_add_group(kpc->pctrl, kmb_grp->name, + kmb_grp->pins, 1, NULL); + } + + return 0; +} + +static int keembay_pinctrl_reg(struct keembay_pinctrl *kpc, struct device *dev) +{ + int ret; + + keembay_pinctrl_desc.pins = keembay_pins; + ret = of_property_read_u32(dev->of_node, "ngpios", &kpc->npins); + if (ret < 0) + return ret; + keembay_pinctrl_desc.npins = kpc->npins; + + kpc->pctrl = devm_pinctrl_register(kpc->dev, &keembay_pinctrl_desc, kpc); + + return PTR_ERR_OR_ZERO(kpc->pctrl); +} + +static int keembay_add_functions(struct keembay_pinctrl *kpc, + struct function_desc *function) +{ + unsigned int i; + + /* Assign the groups for each function */ + for (i = 0; i < kpc->npins; i++) { + const struct pinctrl_pin_desc *pdesc = keembay_pins + i; + struct keembay_mux_desc *mux = pdesc->drv_data; + + while (mux->name) { + struct function_desc *func; + const char **grp; + size_t grp_size; + u32 j, grp_num; + + for (j = 0; j < kpc->nfuncs; j++) { + if (!strcmp(mux->name, function[j].name)) + break; + } + + if (j == kpc->nfuncs) + return -EINVAL; + + func = function + j; + grp_num = func->num_group_names; + grp_size = sizeof(*func->group_names); + + if (!func->group_names) { + func->group_names = devm_kcalloc(kpc->dev, + grp_num, + grp_size, + GFP_KERNEL); + if (!func->group_names) + return -ENOMEM; + } + + grp = func->group_names; + while (*grp) + grp++; + + *grp = pdesc->name; + mux++; + } + } + + /* Add all functions */ + for (i = 0; i < kpc->nfuncs; i++) { + pinmux_generic_add_function(kpc->pctrl, + function[i].name, + function[i].group_names, + function[i].num_group_names, + function[i].data); + } + + return 0; +} + +static int keembay_build_functions(struct keembay_pinctrl *kpc) +{ + struct function_desc *keembay_funcs, *new_funcs; + int i; + + /* Allocate total number of functions */ + kpc->nfuncs = 0; + keembay_funcs = kcalloc(kpc->npins * 8, sizeof(*keembay_funcs), GFP_KERNEL); + if (!keembay_funcs) + return -ENOMEM; + + /* Find total number of functions and each's properties */ + for (i = 0; i < kpc->npins; i++) { + const struct pinctrl_pin_desc *pdesc = keembay_pins + i; + struct keembay_mux_desc *mux = pdesc->drv_data; + + while (mux->name) { + struct function_desc *fdesc = keembay_funcs; + + while (fdesc->name) { + if (!strcmp(mux->name, fdesc->name)) { + fdesc->num_group_names++; + break; + } + + fdesc++; + } + + if (!fdesc->name) { + fdesc->name = mux->name; + fdesc->num_group_names = 1; + fdesc->data = &mux->mode; + kpc->nfuncs++; + } + + mux++; + } + } + + /* Reallocate memory based on actual number of functions */ + new_funcs = krealloc(keembay_funcs, kpc->nfuncs * sizeof(*new_funcs), GFP_KERNEL); + if (!new_funcs) { + kfree(keembay_funcs); + return -ENOMEM; + } + + return keembay_add_functions(kpc, new_funcs); +} + +static const struct keembay_pin_soc keembay_data = { + .pins = keembay_pins, +}; + +static const struct of_device_id keembay_pinctrl_match[] = { + { .compatible = "intel,keembay-pinctrl", .data = &keembay_data }, + { } +}; +MODULE_DEVICE_TABLE(of, keembay_pinctrl_match); + +static int keembay_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct keembay_pinctrl *kpc; + int ret; + + kpc = devm_kzalloc(dev, sizeof(*kpc), GFP_KERNEL); + if (!kpc) + return -ENOMEM; + + kpc->dev = dev; + kpc->soc = device_get_match_data(dev); + + kpc->base0 = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(kpc->base0)) + return PTR_ERR(kpc->base0); + + kpc->base1 = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(kpc->base1)) + return PTR_ERR(kpc->base1); + + raw_spin_lock_init(&kpc->lock); + + ret = keembay_pinctrl_reg(kpc, dev); + if (ret) + return ret; + + ret = keembay_build_groups(kpc); + if (ret) + return ret; + + ret = keembay_build_functions(kpc); + if (ret) + return ret; + + ret = keembay_gpiochip_probe(kpc, pdev); + if (ret) + return ret; + + platform_set_drvdata(pdev, kpc); + + return 0; +} + +static struct platform_driver keembay_pinctrl_driver = { + .probe = keembay_pinctrl_probe, + .driver = { + .name = "keembay-pinctrl", + .of_match_table = keembay_pinctrl_match, + }, +}; +module_platform_driver(keembay_pinctrl_driver); + +MODULE_AUTHOR("Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>"); +MODULE_AUTHOR("Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>"); +MODULE_AUTHOR("Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>"); +MODULE_DESCRIPTION("Intel Keem Bay SoC pinctrl/GPIO driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c index aa6e72214609..67bec7ea0f8b 100644 --- a/drivers/pinctrl/pinctrl-single.c +++ b/drivers/pinctrl/pinctrl-single.c @@ -1115,7 +1115,7 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, { const char *name = "pinctrl-single,bits"; struct pcs_func_vals *vals; - int rows, *pins, found = 0, res = -ENOMEM, i, fsel, gsel; + int rows, *pins, found = 0, res = -ENOMEM, i, fsel; int npins_in_row; struct pcs_function *function = NULL; @@ -1125,6 +1125,11 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, return -EINVAL; } + if (PCS_HAS_PINCONF) { + dev_err(pcs->dev, "pinconf not supported\n"); + return -ENOTSUPP; + } + npins_in_row = pcs->width / pcs->bits_per_pin; vals = devm_kzalloc(pcs->dev, @@ -1212,29 +1217,19 @@ static int pcs_parse_bits_in_pinctrl_entry(struct pcs_device *pcs, goto free_pins; } - gsel = pinctrl_generic_add_group(pcs->pctl, np->name, pins, found, pcs); - if (gsel < 0) { - res = gsel; + res = pinctrl_generic_add_group(pcs->pctl, np->name, pins, found, pcs); + if (res < 0) goto free_function; - } (*map)->type = PIN_MAP_TYPE_MUX_GROUP; (*map)->data.mux.group = np->name; (*map)->data.mux.function = np->name; - if (PCS_HAS_PINCONF) { - dev_err(pcs->dev, "pinconf not supported\n"); - goto free_pingroups; - } - *num_maps = 1; mutex_unlock(&pcs->mutex); return 0; -free_pingroups: - pinctrl_generic_remove_group(pcs->pctl, gsel); - *num_maps = 1; free_function: pinmux_generic_remove_function(pcs->pctl, fsel); free_pins: diff --git a/drivers/pinctrl/pinctrl-stmfx.c b/drivers/pinctrl/pinctrl-stmfx.c index 008c83107a3c..5fa2488fae87 100644 --- a/drivers/pinctrl/pinctrl-stmfx.c +++ b/drivers/pinctrl/pinctrl-stmfx.c @@ -566,7 +566,7 @@ static irqreturn_t stmfx_pinctrl_irq_thread_fn(int irq, void *dev_id) u8 pending[NR_GPIO_REGS]; u8 src[NR_GPIO_REGS] = {0, 0, 0}; unsigned long n, status; - int ret; + int i, ret; ret = regmap_bulk_read(pctl->stmfx->map, STMFX_REG_IRQ_GPI_PENDING, &pending, NR_GPIO_REGS); @@ -576,7 +576,9 @@ static irqreturn_t stmfx_pinctrl_irq_thread_fn(int irq, void *dev_id) regmap_bulk_write(pctl->stmfx->map, STMFX_REG_IRQ_GPI_SRC, src, NR_GPIO_REGS); - status = *(unsigned long *)pending; + BUILD_BUG_ON(NR_GPIO_REGS > sizeof(status)); + for (i = 0, status = 0; i < NR_GPIO_REGS; i++) + status |= (unsigned long)pending[i] << (i * 8); for_each_set_bit(n, &status, gc->ngpio) { handle_nested_irq(irq_find_mapping(gc->irq.domain, n)); stmfx_pinctrl_irq_toggle_trigger(pctl, n); diff --git a/drivers/pinctrl/pinctrl-zynq.c b/drivers/pinctrl/pinctrl-zynq.c index 5fb924a2eedd..a96af8a76a7a 100644 --- a/drivers/pinctrl/pinctrl-zynq.c +++ b/drivers/pinctrl/pinctrl-zynq.c @@ -1028,6 +1028,7 @@ static int zynq_pinconf_cfg_get(struct pinctrl_dev *pctldev, break; } case PIN_CONFIG_IOSTANDARD: + case PIN_CONFIG_POWER_SOURCE: arg = zynq_pinconf_iostd_get(reg); break; default: @@ -1078,6 +1079,7 @@ static int zynq_pinconf_cfg_set(struct pinctrl_dev *pctldev, break; case PIN_CONFIG_IOSTANDARD: + case PIN_CONFIG_POWER_SOURCE: if (arg <= zynq_iostd_min || arg >= zynq_iostd_max) { dev_warn(pctldev->dev, "unsupported IO standard '%u'\n", diff --git a/drivers/pinctrl/pinctrl-zynqmp.c b/drivers/pinctrl/pinctrl-zynqmp.c index bbde676b7313..e14012209992 100644 --- a/drivers/pinctrl/pinctrl-zynqmp.c +++ b/drivers/pinctrl/pinctrl-zynqmp.c @@ -866,15 +866,6 @@ static int zynqmp_pinctrl_probe(struct platform_device *pdev) return ret; } -static int zynqmp_pinctrl_remove(struct platform_device *pdev) -{ - struct zynqmp_pinctrl *pctrl = platform_get_drvdata(pdev); - - pinctrl_unregister(pctrl->pctrl); - - return 0; -} - static const struct of_device_id zynqmp_pinctrl_of_match[] = { { .compatible = "xlnx,zynqmp-pinctrl" }, { } @@ -887,7 +878,6 @@ static struct platform_driver zynqmp_pinctrl_driver = { .of_match_table = zynqmp_pinctrl_of_match, }, .probe = zynqmp_pinctrl_probe, - .remove = zynqmp_pinctrl_remove, }; module_platform_driver(zynqmp_pinctrl_driver); diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig index cad4e60df618..32ea2a8ec02b 100644 --- a/drivers/pinctrl/qcom/Kconfig +++ b/drivers/pinctrl/qcom/Kconfig @@ -88,6 +88,14 @@ config PINCTRL_MSM8960 This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm 8960 platform. +config PINCTRL_MDM9607 + tristate "Qualcomm 9607 pin controller driver" + depends on GPIOLIB && OF + depends on PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm TLMM block found in the Qualcomm 9607 platform. + config PINCTRL_MDM9615 tristate "Qualcomm 9615 pin controller driver" depends on OF @@ -256,6 +264,15 @@ config PINCTRL_SDX55 Qualcomm Technologies Inc TLMM block found on the Qualcomm Technologies Inc SDX55 platform. +config PINCTRL_SM6115 + tristate "Qualcomm Technologies Inc SM6115,SM4250 pin controller driver" + depends on GPIOLIB && OF + depends on PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for the + Qualcomm Technologies Inc TLMM block found on the Qualcomm + Technologies Inc SM6115 and SM4250 platforms. + config PINCTRL_SM6125 tristate "Qualcomm Technologies Inc SM6125 pin controller driver" depends on OF diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile index d696fe2789bb..7a12e8cd2fba 100644 --- a/drivers/pinctrl/qcom/Makefile +++ b/drivers/pinctrl/qcom/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_MSM8996) += pinctrl-msm8996.o obj-$(CONFIG_PINCTRL_MSM8998) += pinctrl-msm8998.o obj-$(CONFIG_PINCTRL_QCS404) += pinctrl-qcs404.o obj-$(CONFIG_PINCTRL_QDF2XXX) += pinctrl-qdf2xxx.o +obj-$(CONFIG_PINCTRL_MDM9607) += pinctrl-mdm9607.o obj-$(CONFIG_PINCTRL_MDM9615) += pinctrl-mdm9615.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o @@ -30,6 +31,7 @@ obj-$(CONFIG_PINCTRL_SC8180X) += pinctrl-sc8180x.o obj-$(CONFIG_PINCTRL_SDM660) += pinctrl-sdm660.o obj-$(CONFIG_PINCTRL_SDM845) += pinctrl-sdm845.o obj-$(CONFIG_PINCTRL_SDX55) += pinctrl-sdx55.o +obj-$(CONFIG_PINCTRL_SM6115) += pinctrl-sm6115.o obj-$(CONFIG_PINCTRL_SM6125) += pinctrl-sm6125.o obj-$(CONFIG_PINCTRL_SM8150) += pinctrl-sm8150.o obj-$(CONFIG_PINCTRL_SM8250) += pinctrl-sm8250.o diff --git a/drivers/pinctrl/qcom/pinctrl-mdm9607.c b/drivers/pinctrl/qcom/pinctrl-mdm9607.c new file mode 100644 index 000000000000..d622b3df0fe7 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-mdm9607.c @@ -0,0 +1,1087 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> + * + * based on pinctrl-msm8916.c + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +static const struct pinctrl_pin_desc mdm9607_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "SDC1_CLK"), + PINCTRL_PIN(81, "SDC1_CMD"), + PINCTRL_PIN(82, "SDC1_DATA"), + PINCTRL_PIN(83, "SDC2_CLK"), + PINCTRL_PIN(84, "SDC2_CMD"), + PINCTRL_PIN(85, "SDC2_DATA"), + PINCTRL_PIN(86, "QDSD_CLK"), + PINCTRL_PIN(87, "QDSD_CMD"), + PINCTRL_PIN(88, "QDSD_DATA0"), + PINCTRL_PIN(89, "QDSD_DATA1"), + PINCTRL_PIN(90, "QDSD_DATA2"), + PINCTRL_PIN(91, "QDSD_DATA3"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } + +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); + +static const unsigned int sdc1_clk_pins[] = { 80 }; +static const unsigned int sdc1_cmd_pins[] = { 81 }; +static const unsigned int sdc1_data_pins[] = { 82 }; +static const unsigned int sdc2_clk_pins[] = { 83 }; +static const unsigned int sdc2_cmd_pins[] = { 84 }; +static const unsigned int sdc2_data_pins[] = { 85 }; +static const unsigned int qdsd_clk_pins[] = { 86 }; +static const unsigned int qdsd_cmd_pins[] = { 87 }; +static const unsigned int qdsd_data0_pins[] = { 88 }; +static const unsigned int qdsd_data1_pins[] = { 89 }; +static const unsigned int qdsd_data2_pins[] = { 90 }; +static const unsigned int qdsd_data3_pins[] = { 91 }; + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = 0x1000 * id, \ + .io_reg = 0x4 + 0x1000 * id, \ + .intr_cfg_reg = 0x8 + 0x1000 * id, \ + .intr_status_reg = 0xc + 0x1000 * id, \ + .intr_target_reg = 0x8 + 0x1000 * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 4, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_PINGROUP(pg_name, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_target_kpss_val = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +enum mdm9607_functions { + msm_mux_adsp_ext, + msm_mux_atest_bbrx0, + msm_mux_atest_bbrx1, + msm_mux_atest_char, + msm_mux_atest_char0, + msm_mux_atest_char1, + msm_mux_atest_char2, + msm_mux_atest_char3, + msm_mux_atest_combodac_to_gpio_native, + msm_mux_atest_gpsadc_dtest0_native, + msm_mux_atest_gpsadc_dtest1_native, + msm_mux_atest_tsens, + msm_mux_backlight_en_b, + msm_mux_bimc_dte0, + msm_mux_bimc_dte1, + msm_mux_blsp1_spi, + msm_mux_blsp2_spi, + msm_mux_blsp3_spi, + msm_mux_blsp_i2c1, + msm_mux_blsp_i2c2, + msm_mux_blsp_i2c3, + msm_mux_blsp_i2c4, + msm_mux_blsp_i2c5, + msm_mux_blsp_i2c6, + msm_mux_blsp_spi1, + msm_mux_blsp_spi2, + msm_mux_blsp_spi3, + msm_mux_blsp_spi4, + msm_mux_blsp_spi5, + msm_mux_blsp_spi6, + msm_mux_blsp_uart1, + msm_mux_blsp_uart2, + msm_mux_blsp_uart3, + msm_mux_blsp_uart4, + msm_mux_blsp_uart5, + msm_mux_blsp_uart6, + msm_mux_blsp_uim1, + msm_mux_blsp_uim2, + msm_mux_codec_int, + msm_mux_codec_rst, + msm_mux_coex_uart, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_dbg_out, + msm_mux_ebi0_wrcdc, + msm_mux_ebi2_a, + msm_mux_ebi2_a_d_8_b, + msm_mux_ebi2_lcd, + msm_mux_ebi2_lcd_cs_n_b, + msm_mux_ebi2_lcd_te_b, + msm_mux_eth_irq, + msm_mux_eth_rst, + msm_mux_gcc_gp1_clk_a, + msm_mux_gcc_gp1_clk_b, + msm_mux_gcc_gp2_clk_a, + msm_mux_gcc_gp2_clk_b, + msm_mux_gcc_gp3_clk_a, + msm_mux_gcc_gp3_clk_b, + msm_mux_gcc_plltest, + msm_mux_gcc_tlmm, + msm_mux_gmac_mdio, + msm_mux_gpio, + msm_mux_gsm0_tx, + msm_mux_lcd_rst, + msm_mux_ldo_en, + msm_mux_ldo_update, + msm_mux_m_voc, + msm_mux_modem_tsync, + msm_mux_nav_ptp_pps_in_a, + msm_mux_nav_ptp_pps_in_b, + msm_mux_nav_tsync_out_a, + msm_mux_nav_tsync_out_b, + msm_mux_pa_indicator, + msm_mux_pbs0, + msm_mux_pbs1, + msm_mux_pbs2, + msm_mux_pri_mi2s_data0_a, + msm_mux_pri_mi2s_data1_a, + msm_mux_pri_mi2s_mclk_a, + msm_mux_pri_mi2s_sck_a, + msm_mux_pri_mi2s_ws_a, + msm_mux_prng_rosc, + msm_mux_ptp_pps_out_a, + msm_mux_ptp_pps_out_b, + msm_mux_pwr_crypto_enabled_a, + msm_mux_pwr_crypto_enabled_b, + msm_mux_pwr_modem_enabled_a, + msm_mux_pwr_modem_enabled_b, + msm_mux_pwr_nav_enabled_a, + msm_mux_pwr_nav_enabled_b, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qdss_traceclk_a, + msm_mux_qdss_traceclk_b, + msm_mux_qdss_tracectl_a, + msm_mux_qdss_tracectl_b, + msm_mux_qdss_tracedata_a, + msm_mux_qdss_tracedata_b, + msm_mux_rcm_marker1, + msm_mux_rcm_marker2, + msm_mux_sd_write, + msm_mux_sec_mi2s, + msm_mux_sensor_en, + msm_mux_sensor_int2, + msm_mux_sensor_int3, + msm_mux_sensor_rst, + msm_mux_ssbi1, + msm_mux_ssbi2, + msm_mux_touch_rst, + msm_mux_ts_int, + msm_mux_uim1_clk, + msm_mux_uim1_data, + msm_mux_uim1_present, + msm_mux_uim1_reset, + msm_mux_uim2_clk, + msm_mux_uim2_data, + msm_mux_uim2_present, + msm_mux_uim2_reset, + msm_mux_uim_batt, + msm_mux_wlan_en1, + msm_mux__, +}; + +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", +}; +static const char * const blsp_spi3_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const blsp_uart3_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const qdss_tracedata_a_groups[] = { + "gpio0", "gpio1", "gpio4", "gpio5", "gpio20", "gpio21", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio26", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", +}; +static const char * const bimc_dte1_groups[] = { + "gpio1", "gpio24", +}; +static const char * const blsp_i2c3_groups[] = { + "gpio2", "gpio3", +}; +static const char * const qdss_traceclk_a_groups[] = { + "gpio2", +}; +static const char * const bimc_dte0_groups[] = { + "gpio2", "gpio15", +}; +static const char * const qdss_cti_trig_in_a1_groups[] = { + "gpio3", +}; +static const char * const blsp_spi2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uart2_groups[] = { + "gpio4", "gpio5", "gpio6", "gpio7", +}; +static const char * const blsp_uim2_groups[] = { + "gpio4", "gpio5", +}; +static const char * const blsp_i2c2_groups[] = { + "gpio6", "gpio7", +}; +static const char * const qdss_tracectl_a_groups[] = { + "gpio6", +}; +static const char * const sensor_int2_groups[] = { + "gpio8", +}; +static const char * const blsp_spi5_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const blsp_uart5_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const ebi2_lcd_groups[] = { + "gpio8", "gpio11", "gpio74", "gpio78", +}; +static const char * const m_voc_groups[] = { + "gpio8", "gpio78", +}; +static const char * const sensor_int3_groups[] = { + "gpio9", +}; +static const char * const sensor_en_groups[] = { + "gpio10", +}; +static const char * const blsp_i2c5_groups[] = { + "gpio10", "gpio11", +}; +static const char * const ebi2_a_groups[] = { + "gpio10", +}; +static const char * const qdss_tracedata_b_groups[] = { + "gpio10", "gpio39", "gpio40", "gpio41", "gpio42", "gpio43", "gpio46", + "gpio47", "gpio48", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", + "gpio58", "gpio59", +}; +static const char * const sensor_rst_groups[] = { + "gpio11", +}; +static const char * const blsp2_spi_groups[] = { + "gpio11", "gpio13", "gpio77", +}; +static const char * const blsp_spi1_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; +static const char * const blsp_uart1_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; +static const char * const blsp_uim1_groups[] = { + "gpio12", "gpio13", +}; +static const char * const blsp3_spi_groups[] = { + "gpio12", "gpio26", "gpio76", +}; +static const char * const gcc_gp2_clk_b_groups[] = { + "gpio12", +}; +static const char * const gcc_gp3_clk_b_groups[] = { + "gpio13", +}; +static const char * const blsp_i2c1_groups[] = { + "gpio14", "gpio15", +}; +static const char * const gcc_gp1_clk_b_groups[] = { + "gpio14", +}; +static const char * const blsp_spi4_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const blsp_uart4_groups[] = { + "gpio16", "gpio17", "gpio18", "gpio19", +}; +static const char * const rcm_marker1_groups[] = { + "gpio18", +}; +static const char * const blsp_i2c4_groups[] = { + "gpio18", "gpio19", +}; +static const char * const qdss_cti_trig_out_a1_groups[] = { + "gpio18", +}; +static const char * const rcm_marker2_groups[] = { + "gpio19", +}; +static const char * const qdss_cti_trig_out_a0_groups[] = { + "gpio19", +}; +static const char * const blsp_spi6_groups[] = { + "gpio20", "gpio21", "gpio22", "gpio23", +}; +static const char * const blsp_uart6_groups[] = { + "gpio20", "gpio21", "gpio22", "gpio23", +}; +static const char * const pri_mi2s_ws_a_groups[] = { + "gpio20", +}; +static const char * const ebi2_lcd_te_b_groups[] = { + "gpio20", +}; +static const char * const blsp1_spi_groups[] = { + "gpio20", "gpio21", "gpio78", +}; +static const char * const backlight_en_b_groups[] = { + "gpio21", +}; +static const char * const pri_mi2s_data0_a_groups[] = { + "gpio21", +}; +static const char * const pri_mi2s_data1_a_groups[] = { + "gpio22", +}; +static const char * const blsp_i2c6_groups[] = { + "gpio22", "gpio23", +}; +static const char * const ebi2_a_d_8_b_groups[] = { + "gpio22", +}; +static const char * const pri_mi2s_sck_a_groups[] = { + "gpio23", +}; +static const char * const ebi2_lcd_cs_n_b_groups[] = { + "gpio23", +}; +static const char * const touch_rst_groups[] = { + "gpio24", +}; +static const char * const pri_mi2s_mclk_a_groups[] = { + "gpio24", +}; +static const char * const pwr_nav_enabled_a_groups[] = { + "gpio24", +}; +static const char * const ts_int_groups[] = { + "gpio25", +}; +static const char * const sd_write_groups[] = { + "gpio25", +}; +static const char * const pwr_crypto_enabled_a_groups[] = { + "gpio25", +}; +static const char * const codec_rst_groups[] = { + "gpio26", +}; +static const char * const adsp_ext_groups[] = { + "gpio26", +}; +static const char * const atest_combodac_to_gpio_native_groups[] = { + "gpio26", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32", + "gpio33", "gpio34", "gpio35", "gpio41", "gpio45", "gpio49", "gpio50", + "gpio51", "gpio52", "gpio54", "gpio55", "gpio57", "gpio59", +}; +static const char * const uim2_data_groups[] = { + "gpio27", +}; +static const char * const gmac_mdio_groups[] = { + "gpio27", "gpio28", +}; +static const char * const gcc_gp1_clk_a_groups[] = { + "gpio27", +}; +static const char * const uim2_clk_groups[] = { + "gpio28", +}; +static const char * const gcc_gp2_clk_a_groups[] = { + "gpio28", +}; +static const char * const eth_irq_groups[] = { + "gpio29", +}; +static const char * const uim2_reset_groups[] = { + "gpio29", +}; +static const char * const gcc_gp3_clk_a_groups[] = { + "gpio29", +}; +static const char * const eth_rst_groups[] = { + "gpio30", +}; +static const char * const uim2_present_groups[] = { + "gpio30", +}; +static const char * const prng_rosc_groups[] = { + "gpio30", +}; +static const char * const uim1_data_groups[] = { + "gpio31", +}; +static const char * const uim1_clk_groups[] = { + "gpio32", +}; +static const char * const uim1_reset_groups[] = { + "gpio33", +}; +static const char * const uim1_present_groups[] = { + "gpio34", +}; +static const char * const gcc_plltest_groups[] = { + "gpio34", "gpio35", +}; +static const char * const uim_batt_groups[] = { + "gpio35", +}; +static const char * const coex_uart_groups[] = { + "gpio36", "gpio37", +}; +static const char * const codec_int_groups[] = { + "gpio38", +}; +static const char * const qdss_cti_trig_in_a0_groups[] = { + "gpio38", +}; +static const char * const atest_bbrx1_groups[] = { + "gpio39", +}; +static const char * const cri_trng0_groups[] = { + "gpio40", +}; +static const char * const atest_bbrx0_groups[] = { + "gpio40", +}; +static const char * const cri_trng_groups[] = { + "gpio42", +}; +static const char * const qdss_cti_trig_in_b0_groups[] = { + "gpio44", +}; +static const char * const atest_gpsadc_dtest0_native_groups[] = { + "gpio44", +}; +static const char * const qdss_cti_trig_out_b0_groups[] = { + "gpio45", +}; +static const char * const qdss_tracectl_b_groups[] = { + "gpio49", +}; +static const char * const qdss_traceclk_b_groups[] = { + "gpio50", +}; +static const char * const pa_indicator_groups[] = { + "gpio51", +}; +static const char * const modem_tsync_groups[] = { + "gpio53", +}; +static const char * const nav_tsync_out_a_groups[] = { + "gpio53", +}; +static const char * const nav_ptp_pps_in_a_groups[] = { + "gpio53", +}; +static const char * const ptp_pps_out_a_groups[] = { + "gpio53", +}; +static const char * const gsm0_tx_groups[] = { + "gpio55", +}; +static const char * const qdss_cti_trig_in_b1_groups[] = { + "gpio56", +}; +static const char * const cri_trng1_groups[] = { + "gpio57", +}; +static const char * const qdss_cti_trig_out_b1_groups[] = { + "gpio57", +}; +static const char * const ssbi1_groups[] = { + "gpio58", +}; +static const char * const atest_gpsadc_dtest1_native_groups[] = { + "gpio58", +}; +static const char * const ssbi2_groups[] = { + "gpio59", +}; +static const char * const atest_char3_groups[] = { + "gpio60", +}; +static const char * const atest_char2_groups[] = { + "gpio61", +}; +static const char * const atest_char1_groups[] = { + "gpio62", +}; +static const char * const atest_char0_groups[] = { + "gpio63", +}; +static const char * const atest_char_groups[] = { + "gpio64", +}; +static const char * const ebi0_wrcdc_groups[] = { + "gpio70", +}; +static const char * const ldo_update_groups[] = { + "gpio72", +}; +static const char * const gcc_tlmm_groups[] = { + "gpio72", +}; +static const char * const ldo_en_groups[] = { + "gpio73", +}; +static const char * const dbg_out_groups[] = { + "gpio73", +}; +static const char * const atest_tsens_groups[] = { + "gpio73", +}; +static const char * const lcd_rst_groups[] = { + "gpio74", +}; +static const char * const wlan_en1_groups[] = { + "gpio75", +}; +static const char * const nav_tsync_out_b_groups[] = { + "gpio75", +}; +static const char * const nav_ptp_pps_in_b_groups[] = { + "gpio75", +}; +static const char * const ptp_pps_out_b_groups[] = { + "gpio75", +}; +static const char * const pbs0_groups[] = { + "gpio76", +}; +static const char * const sec_mi2s_groups[] = { + "gpio76", "gpio77", "gpio78", "gpio79", +}; +static const char * const pwr_modem_enabled_a_groups[] = { + "gpio76", +}; +static const char * const pbs1_groups[] = { + "gpio77", +}; +static const char * const pwr_modem_enabled_b_groups[] = { + "gpio77", +}; +static const char * const pbs2_groups[] = { + "gpio78", +}; +static const char * const pwr_nav_enabled_b_groups[] = { + "gpio78", +}; +static const char * const pwr_crypto_enabled_b_groups[] = { + "gpio79", +}; + +static const struct msm_function mdm9607_functions[] = { + FUNCTION(adsp_ext), + FUNCTION(atest_bbrx0), + FUNCTION(atest_bbrx1), + FUNCTION(atest_char), + FUNCTION(atest_char0), + FUNCTION(atest_char1), + FUNCTION(atest_char2), + FUNCTION(atest_char3), + FUNCTION(atest_combodac_to_gpio_native), + FUNCTION(atest_gpsadc_dtest0_native), + FUNCTION(atest_gpsadc_dtest1_native), + FUNCTION(atest_tsens), + FUNCTION(backlight_en_b), + FUNCTION(bimc_dte0), + FUNCTION(bimc_dte1), + FUNCTION(blsp1_spi), + FUNCTION(blsp2_spi), + FUNCTION(blsp3_spi), + FUNCTION(blsp_i2c1), + FUNCTION(blsp_i2c2), + FUNCTION(blsp_i2c3), + FUNCTION(blsp_i2c4), + FUNCTION(blsp_i2c5), + FUNCTION(blsp_i2c6), + FUNCTION(blsp_spi1), + FUNCTION(blsp_spi2), + FUNCTION(blsp_spi3), + FUNCTION(blsp_spi4), + FUNCTION(blsp_spi5), + FUNCTION(blsp_spi6), + FUNCTION(blsp_uart1), + FUNCTION(blsp_uart2), + FUNCTION(blsp_uart3), + FUNCTION(blsp_uart4), + FUNCTION(blsp_uart5), + FUNCTION(blsp_uart6), + FUNCTION(blsp_uim1), + FUNCTION(blsp_uim2), + FUNCTION(codec_int), + FUNCTION(codec_rst), + FUNCTION(coex_uart), + FUNCTION(cri_trng), + FUNCTION(cri_trng0), + FUNCTION(cri_trng1), + FUNCTION(dbg_out), + FUNCTION(ebi0_wrcdc), + FUNCTION(ebi2_a), + FUNCTION(ebi2_a_d_8_b), + FUNCTION(ebi2_lcd), + FUNCTION(ebi2_lcd_cs_n_b), + FUNCTION(ebi2_lcd_te_b), + FUNCTION(eth_irq), + FUNCTION(eth_rst), + FUNCTION(gcc_gp1_clk_a), + FUNCTION(gcc_gp1_clk_b), + FUNCTION(gcc_gp2_clk_a), + FUNCTION(gcc_gp2_clk_b), + FUNCTION(gcc_gp3_clk_a), + FUNCTION(gcc_gp3_clk_b), + FUNCTION(gcc_plltest), + FUNCTION(gcc_tlmm), + FUNCTION(gmac_mdio), + FUNCTION(gpio), + FUNCTION(gsm0_tx), + FUNCTION(lcd_rst), + FUNCTION(ldo_en), + FUNCTION(ldo_update), + FUNCTION(m_voc), + FUNCTION(modem_tsync), + FUNCTION(nav_ptp_pps_in_a), + FUNCTION(nav_ptp_pps_in_b), + FUNCTION(nav_tsync_out_a), + FUNCTION(nav_tsync_out_b), + FUNCTION(pa_indicator), + FUNCTION(pbs0), + FUNCTION(pbs1), + FUNCTION(pbs2), + FUNCTION(pri_mi2s_data0_a), + FUNCTION(pri_mi2s_data1_a), + FUNCTION(pri_mi2s_mclk_a), + FUNCTION(pri_mi2s_sck_a), + FUNCTION(pri_mi2s_ws_a), + FUNCTION(prng_rosc), + FUNCTION(ptp_pps_out_a), + FUNCTION(ptp_pps_out_b), + FUNCTION(pwr_crypto_enabled_a), + FUNCTION(pwr_crypto_enabled_b), + FUNCTION(pwr_modem_enabled_a), + FUNCTION(pwr_modem_enabled_b), + FUNCTION(pwr_nav_enabled_a), + FUNCTION(pwr_nav_enabled_b), + FUNCTION(qdss_cti_trig_in_a0), + FUNCTION(qdss_cti_trig_in_a1), + FUNCTION(qdss_cti_trig_in_b0), + FUNCTION(qdss_cti_trig_in_b1), + FUNCTION(qdss_cti_trig_out_a0), + FUNCTION(qdss_cti_trig_out_a1), + FUNCTION(qdss_cti_trig_out_b0), + FUNCTION(qdss_cti_trig_out_b1), + FUNCTION(qdss_traceclk_a), + FUNCTION(qdss_traceclk_b), + FUNCTION(qdss_tracectl_a), + FUNCTION(qdss_tracectl_b), + FUNCTION(qdss_tracedata_a), + FUNCTION(qdss_tracedata_b), + FUNCTION(rcm_marker1), + FUNCTION(rcm_marker2), + FUNCTION(sd_write), + FUNCTION(sec_mi2s), + FUNCTION(sensor_en), + FUNCTION(sensor_int2), + FUNCTION(sensor_int3), + FUNCTION(sensor_rst), + FUNCTION(ssbi1), + FUNCTION(ssbi2), + FUNCTION(touch_rst), + FUNCTION(ts_int), + FUNCTION(uim1_clk), + FUNCTION(uim1_data), + FUNCTION(uim1_present), + FUNCTION(uim1_reset), + FUNCTION(uim2_clk), + FUNCTION(uim2_data), + FUNCTION(uim2_present), + FUNCTION(uim2_reset), + FUNCTION(uim_batt), + FUNCTION(wlan_en1) +}; + +static const struct msm_pingroup mdm9607_groups[] = { + PINGROUP(0, blsp_uart3, blsp_spi3, _, _, _, _, _, qdss_tracedata_a, _), + PINGROUP(1, blsp_uart3, blsp_spi3, _, _, _, _, _, qdss_tracedata_a, bimc_dte1), + PINGROUP(2, blsp_uart3, blsp_i2c3, blsp_spi3, _, _, _, _, _, qdss_traceclk_a), + PINGROUP(3, blsp_uart3, blsp_i2c3, blsp_spi3, _, _, _, _, _, _), + PINGROUP(4, blsp_spi2, blsp_uart2, blsp_uim2, _, _, _, _, qdss_tracedata_a, _), + PINGROUP(5, blsp_spi2, blsp_uart2, blsp_uim2, _, _, _, _, qdss_tracedata_a, _), + PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, _, _, _, _, _, _), + PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, _, _, _, _, _, _), + PINGROUP(8, blsp_spi5, blsp_uart5, ebi2_lcd, m_voc, _, _, _, _, _), + PINGROUP(9, blsp_spi5, blsp_uart5, _, _, _, _, _, _, _), + PINGROUP(10, blsp_spi5, blsp_i2c5, blsp_uart5, ebi2_a, _, _, qdss_tracedata_b, _, _), + PINGROUP(11, blsp_spi5, blsp_i2c5, blsp_uart5, blsp2_spi, ebi2_lcd, _, _, _, _), + PINGROUP(12, blsp_spi1, blsp_uart1, blsp_uim1, blsp3_spi, gcc_gp2_clk_b, _, _, _, _), + PINGROUP(13, blsp_spi1, blsp_uart1, blsp_uim1, blsp2_spi, gcc_gp3_clk_b, _, _, _, _), + PINGROUP(14, blsp_spi1, blsp_uart1, blsp_i2c1, gcc_gp1_clk_b, _, _, _, _, _), + PINGROUP(15, blsp_spi1, blsp_uart1, blsp_i2c1, _, _, _, _, _, _), + PINGROUP(16, blsp_spi4, blsp_uart4, _, _, _, _, _, _, _), + PINGROUP(17, blsp_spi4, blsp_uart4, _, _, _, _, _, _, _), + PINGROUP(18, blsp_spi4, blsp_uart4, blsp_i2c4, _, _, _, _, _, _), + PINGROUP(19, blsp_spi4, blsp_uart4, blsp_i2c4, _, _, _, _, _, _), + PINGROUP(20, blsp_spi6, blsp_uart6, pri_mi2s_ws_a, ebi2_lcd_te_b, blsp1_spi, _, _, _, + qdss_tracedata_a), + PINGROUP(21, blsp_spi6, blsp_uart6, pri_mi2s_data0_a, blsp1_spi, _, _, _, _, _), + PINGROUP(22, blsp_spi6, blsp_uart6, pri_mi2s_data1_a, blsp_i2c6, ebi2_a_d_8_b, _, _, _, _), + PINGROUP(23, blsp_spi6, blsp_uart6, pri_mi2s_sck_a, blsp_i2c6, ebi2_lcd_cs_n_b, _, _, _, _), + PINGROUP(24, pri_mi2s_mclk_a, _, pwr_nav_enabled_a, _, _, _, _, qdss_tracedata_a, + bimc_dte1), + PINGROUP(25, sd_write, _, pwr_crypto_enabled_a, _, _, _, _, qdss_tracedata_a, _), + PINGROUP(26, blsp3_spi, adsp_ext, _, qdss_tracedata_a, _, atest_combodac_to_gpio_native, _, + _, _), + PINGROUP(27, uim2_data, gmac_mdio, gcc_gp1_clk_a, _, _, atest_combodac_to_gpio_native, _, _, + _), + PINGROUP(28, uim2_clk, gmac_mdio, gcc_gp2_clk_a, _, _, atest_combodac_to_gpio_native, _, _, + _), + PINGROUP(29, uim2_reset, gcc_gp3_clk_a, _, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(30, uim2_present, prng_rosc, _, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(31, uim1_data, _, _, atest_combodac_to_gpio_native, _, _, _, _, _), + PINGROUP(32, uim1_clk, _, _, atest_combodac_to_gpio_native, _, _, _, _, _), + PINGROUP(33, uim1_reset, _, _, atest_combodac_to_gpio_native, _, _, _, _, _), + PINGROUP(34, uim1_present, gcc_plltest, _, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(35, uim_batt, gcc_plltest, _, atest_combodac_to_gpio_native, _, _, _, _, _), + PINGROUP(36, coex_uart, _, _, _, _, _, _, _, _), + PINGROUP(37, coex_uart, _, _, _, _, _, _, _, _), + PINGROUP(38, _, _, _, qdss_cti_trig_in_a0, _, _, _, _, _), + PINGROUP(39, _, _, _, qdss_tracedata_b, _, atest_bbrx1, _, _, _), + PINGROUP(40, _, cri_trng0, _, _, _, _, qdss_tracedata_b, _, atest_bbrx0), + PINGROUP(41, _, _, _, _, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _), + PINGROUP(42, _, cri_trng, _, _, qdss_tracedata_b, _, _, _, _), + PINGROUP(43, _, _, _, _, qdss_tracedata_b, _, _, _, _), + PINGROUP(44, _, _, qdss_cti_trig_in_b0, _, atest_gpsadc_dtest0_native, _, _, _, _), + PINGROUP(45, _, _, qdss_cti_trig_out_b0, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(46, _, _, qdss_tracedata_b, _, _, _, _, _, _), + PINGROUP(47, _, _, qdss_tracedata_b, _, _, _, _, _, _), + PINGROUP(48, _, _, qdss_tracedata_b, _, _, _, _, _, _), + PINGROUP(49, _, _, qdss_tracectl_b, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(50, _, _, qdss_traceclk_b, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(51, _, pa_indicator, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _, _, + _), + PINGROUP(52, _, _, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _, _, _), + PINGROUP(53, _, modem_tsync, nav_tsync_out_a, nav_ptp_pps_in_a, ptp_pps_out_a, + qdss_tracedata_b, _, _, _), + PINGROUP(54, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _, _, _, _, _), + PINGROUP(55, gsm0_tx, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _, _, _, _), + PINGROUP(56, _, _, qdss_cti_trig_in_b1, _, _, _, _, _, _), + PINGROUP(57, _, cri_trng1, _, qdss_cti_trig_out_b1, _, atest_combodac_to_gpio_native, _, _, + _), + PINGROUP(58, _, ssbi1, _, qdss_tracedata_b, _, atest_gpsadc_dtest1_native, _, _, _), + PINGROUP(59, _, ssbi2, _, qdss_tracedata_b, _, atest_combodac_to_gpio_native, _, _, _), + PINGROUP(60, atest_char3, _, _, _, _, _, _, _, _), + PINGROUP(61, atest_char2, _, _, _, _, _, _, _, _), + PINGROUP(62, atest_char1, _, _, _, _, _, _, _, _), + PINGROUP(63, atest_char0, _, _, _, _, _, _, _, _), + PINGROUP(64, atest_char, _, _, _, _, _, _, _, _), + PINGROUP(65, _, _, _, _, _, _, _, _, _), + PINGROUP(66, _, _, _, _, _, _, _, _, _), + PINGROUP(67, _, _, _, _, _, _, _, _, _), + PINGROUP(68, _, _, _, _, _, _, _, _, _), + PINGROUP(69, _, _, _, _, _, _, _, _, _), + PINGROUP(70, _, _, ebi0_wrcdc, _, _, _, _, _, _), + PINGROUP(71, _, _, _, _, _, _, _, _, _), + PINGROUP(72, ldo_update, _, gcc_tlmm, _, _, _, _, _, _), + PINGROUP(73, ldo_en, dbg_out, _, _, _, atest_tsens, _, _, _), + PINGROUP(74, ebi2_lcd, _, _, _, _, _, _, _, _), + PINGROUP(75, nav_tsync_out_b, nav_ptp_pps_in_b, ptp_pps_out_b, _, qdss_tracedata_a, _, _, _, + _), + PINGROUP(76, pbs0, sec_mi2s, blsp3_spi, pwr_modem_enabled_a, _, qdss_tracedata_a, _, _, _), + PINGROUP(77, pbs1, sec_mi2s, blsp2_spi, pwr_modem_enabled_b, _, qdss_tracedata_a, _, _, _), + PINGROUP(78, pbs2, sec_mi2s, blsp1_spi, ebi2_lcd, m_voc, pwr_nav_enabled_b, _, + qdss_tracedata_a, _), + PINGROUP(79, sec_mi2s, _, pwr_crypto_enabled_b, _, qdss_tracedata_a, _, _, _, _), + SDC_PINGROUP(sdc1_clk, 0x10a000, 13, 6), + SDC_PINGROUP(sdc1_cmd, 0x10a000, 11, 3), + SDC_PINGROUP(sdc1_data, 0x10a000, 9, 0), + SDC_PINGROUP(sdc2_clk, 0x109000, 14, 6), + SDC_PINGROUP(sdc2_cmd, 0x109000, 11, 3), + SDC_PINGROUP(sdc2_data, 0x109000, 9, 0), + SDC_PINGROUP(qdsd_clk, 0x19c000, 3, 0), + SDC_PINGROUP(qdsd_cmd, 0x19c000, 8, 5), + SDC_PINGROUP(qdsd_data0, 0x19c000, 13, 10), + SDC_PINGROUP(qdsd_data1, 0x19c000, 18, 15), + SDC_PINGROUP(qdsd_data2, 0x19c000, 23, 20), + SDC_PINGROUP(qdsd_data3, 0x19c000, 28, 25), +}; + +static const struct msm_pinctrl_soc_data mdm9607_pinctrl = { + .pins = mdm9607_pins, + .npins = ARRAY_SIZE(mdm9607_pins), + .functions = mdm9607_functions, + .nfunctions = ARRAY_SIZE(mdm9607_functions), + .groups = mdm9607_groups, + .ngroups = ARRAY_SIZE(mdm9607_groups), + .ngpios = 80, +}; + +static int mdm9607_pinctrl_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &mdm9607_pinctrl); +} + +static const struct of_device_id mdm9607_pinctrl_of_match[] = { + { .compatible = "qcom,mdm9607-tlmm", }, + { } +}; + +static struct platform_driver mdm9607_pinctrl_driver = { + .driver = { + .name = "mdm9607-pinctrl", + .of_match_table = mdm9607_pinctrl_of_match, + }, + .probe = mdm9607_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init mdm9607_pinctrl_init(void) +{ + return platform_driver_register(&mdm9607_pinctrl_driver); +} +arch_initcall(mdm9607_pinctrl_init); + +static void __exit mdm9607_pinctrl_exit(void) +{ + platform_driver_unregister(&mdm9607_pinctrl_driver); +} +module_exit(mdm9607_pinctrl_exit); + +MODULE_DESCRIPTION("Qualcomm mdm9607 pinctrl driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, mdm9607_pinctrl_of_match); diff --git a/drivers/pinctrl/qcom/pinctrl-sm6115.c b/drivers/pinctrl/qcom/pinctrl-sm6115.c new file mode 100644 index 000000000000..b3a0161ca377 --- /dev/null +++ b/drivers/pinctrl/qcom/pinctrl-sm6115.c @@ -0,0 +1,923 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +static const char * const sm6115_tiles[] = { + "south", + "east", + "west" +}; + +enum { + SOUTH, + EAST, + WEST +}; + +#define FUNCTION(fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define PINGROUP(id, _tile, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = 0x1000 * id, \ + .io_reg = 0x4 + 0x1000 * id, \ + .intr_cfg_reg = 0x8 + 0x1000 * id, \ + .intr_status_reg = 0xc + 0x1000 * id, \ + .intr_target_reg = 0x8 + 0x1000 * id, \ + .tile = _tile, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +#define SDC_QDSD_PINGROUP(pg_name, _tile, ctl, pull, drv) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = ctl, \ + .io_reg = 0, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .tile = _tile, \ + .mux_bit = -1, \ + .pull_bit = pull, \ + .drv_bit = drv, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = -1, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } + +#define UFS_RESET(pg_name, offset) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \ + .ctl_reg = offset, \ + .io_reg = offset + 0x4, \ + .intr_cfg_reg = 0, \ + .intr_status_reg = 0, \ + .intr_target_reg = 0, \ + .tile = WEST, \ + .mux_bit = -1, \ + .pull_bit = 3, \ + .drv_bit = 0, \ + .oe_bit = -1, \ + .in_bit = -1, \ + .out_bit = 0, \ + .intr_enable_bit = -1, \ + .intr_status_bit = -1, \ + .intr_target_bit = -1, \ + .intr_raw_status_bit = -1, \ + .intr_polarity_bit = -1, \ + .intr_detection_bit = -1, \ + .intr_detection_width = -1, \ + } +static const struct pinctrl_pin_desc sm6115_pins[] = { + PINCTRL_PIN(0, "GPIO_0"), + PINCTRL_PIN(1, "GPIO_1"), + PINCTRL_PIN(2, "GPIO_2"), + PINCTRL_PIN(3, "GPIO_3"), + PINCTRL_PIN(4, "GPIO_4"), + PINCTRL_PIN(5, "GPIO_5"), + PINCTRL_PIN(6, "GPIO_6"), + PINCTRL_PIN(7, "GPIO_7"), + PINCTRL_PIN(8, "GPIO_8"), + PINCTRL_PIN(9, "GPIO_9"), + PINCTRL_PIN(10, "GPIO_10"), + PINCTRL_PIN(11, "GPIO_11"), + PINCTRL_PIN(12, "GPIO_12"), + PINCTRL_PIN(13, "GPIO_13"), + PINCTRL_PIN(14, "GPIO_14"), + PINCTRL_PIN(15, "GPIO_15"), + PINCTRL_PIN(16, "GPIO_16"), + PINCTRL_PIN(17, "GPIO_17"), + PINCTRL_PIN(18, "GPIO_18"), + PINCTRL_PIN(19, "GPIO_19"), + PINCTRL_PIN(20, "GPIO_20"), + PINCTRL_PIN(21, "GPIO_21"), + PINCTRL_PIN(22, "GPIO_22"), + PINCTRL_PIN(23, "GPIO_23"), + PINCTRL_PIN(24, "GPIO_24"), + PINCTRL_PIN(25, "GPIO_25"), + PINCTRL_PIN(26, "GPIO_26"), + PINCTRL_PIN(27, "GPIO_27"), + PINCTRL_PIN(28, "GPIO_28"), + PINCTRL_PIN(29, "GPIO_29"), + PINCTRL_PIN(30, "GPIO_30"), + PINCTRL_PIN(31, "GPIO_31"), + PINCTRL_PIN(32, "GPIO_32"), + PINCTRL_PIN(33, "GPIO_33"), + PINCTRL_PIN(34, "GPIO_34"), + PINCTRL_PIN(35, "GPIO_35"), + PINCTRL_PIN(36, "GPIO_36"), + PINCTRL_PIN(37, "GPIO_37"), + PINCTRL_PIN(38, "GPIO_38"), + PINCTRL_PIN(39, "GPIO_39"), + PINCTRL_PIN(40, "GPIO_40"), + PINCTRL_PIN(41, "GPIO_41"), + PINCTRL_PIN(42, "GPIO_42"), + PINCTRL_PIN(43, "GPIO_43"), + PINCTRL_PIN(44, "GPIO_44"), + PINCTRL_PIN(45, "GPIO_45"), + PINCTRL_PIN(46, "GPIO_46"), + PINCTRL_PIN(47, "GPIO_47"), + PINCTRL_PIN(48, "GPIO_48"), + PINCTRL_PIN(49, "GPIO_49"), + PINCTRL_PIN(50, "GPIO_50"), + PINCTRL_PIN(51, "GPIO_51"), + PINCTRL_PIN(52, "GPIO_52"), + PINCTRL_PIN(53, "GPIO_53"), + PINCTRL_PIN(54, "GPIO_54"), + PINCTRL_PIN(55, "GPIO_55"), + PINCTRL_PIN(56, "GPIO_56"), + PINCTRL_PIN(57, "GPIO_57"), + PINCTRL_PIN(58, "GPIO_58"), + PINCTRL_PIN(59, "GPIO_59"), + PINCTRL_PIN(60, "GPIO_60"), + PINCTRL_PIN(61, "GPIO_61"), + PINCTRL_PIN(62, "GPIO_62"), + PINCTRL_PIN(63, "GPIO_63"), + PINCTRL_PIN(64, "GPIO_64"), + PINCTRL_PIN(65, "GPIO_65"), + PINCTRL_PIN(66, "GPIO_66"), + PINCTRL_PIN(67, "GPIO_67"), + PINCTRL_PIN(68, "GPIO_68"), + PINCTRL_PIN(69, "GPIO_69"), + PINCTRL_PIN(70, "GPIO_70"), + PINCTRL_PIN(71, "GPIO_71"), + PINCTRL_PIN(72, "GPIO_72"), + PINCTRL_PIN(73, "GPIO_73"), + PINCTRL_PIN(74, "GPIO_74"), + PINCTRL_PIN(75, "GPIO_75"), + PINCTRL_PIN(76, "GPIO_76"), + PINCTRL_PIN(77, "GPIO_77"), + PINCTRL_PIN(78, "GPIO_78"), + PINCTRL_PIN(79, "GPIO_79"), + PINCTRL_PIN(80, "GPIO_80"), + PINCTRL_PIN(81, "GPIO_81"), + PINCTRL_PIN(82, "GPIO_82"), + PINCTRL_PIN(83, "GPIO_83"), + PINCTRL_PIN(84, "GPIO_84"), + PINCTRL_PIN(85, "GPIO_85"), + PINCTRL_PIN(86, "GPIO_86"), + PINCTRL_PIN(87, "GPIO_87"), + PINCTRL_PIN(88, "GPIO_88"), + PINCTRL_PIN(89, "GPIO_89"), + PINCTRL_PIN(90, "GPIO_90"), + PINCTRL_PIN(91, "GPIO_91"), + PINCTRL_PIN(92, "GPIO_92"), + PINCTRL_PIN(93, "GPIO_93"), + PINCTRL_PIN(94, "GPIO_94"), + PINCTRL_PIN(95, "GPIO_95"), + PINCTRL_PIN(96, "GPIO_96"), + PINCTRL_PIN(97, "GPIO_97"), + PINCTRL_PIN(98, "GPIO_98"), + PINCTRL_PIN(99, "GPIO_99"), + PINCTRL_PIN(100, "GPIO_100"), + PINCTRL_PIN(101, "GPIO_101"), + PINCTRL_PIN(102, "GPIO_102"), + PINCTRL_PIN(103, "GPIO_103"), + PINCTRL_PIN(104, "GPIO_104"), + PINCTRL_PIN(105, "GPIO_105"), + PINCTRL_PIN(106, "GPIO_106"), + PINCTRL_PIN(107, "GPIO_107"), + PINCTRL_PIN(108, "GPIO_108"), + PINCTRL_PIN(109, "GPIO_109"), + PINCTRL_PIN(110, "GPIO_110"), + PINCTRL_PIN(111, "GPIO_111"), + PINCTRL_PIN(112, "GPIO_112"), + PINCTRL_PIN(113, "UFS_RESET"), + PINCTRL_PIN(114, "SDC1_RCLK"), + PINCTRL_PIN(115, "SDC1_CLK"), + PINCTRL_PIN(116, "SDC1_CMD"), + PINCTRL_PIN(117, "SDC1_DATA"), + PINCTRL_PIN(118, "SDC2_CLK"), + PINCTRL_PIN(119, "SDC2_CMD"), + PINCTRL_PIN(120, "SDC2_DATA"), +}; + +#define DECLARE_MSM_GPIO_PINS(pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS(0); +DECLARE_MSM_GPIO_PINS(1); +DECLARE_MSM_GPIO_PINS(2); +DECLARE_MSM_GPIO_PINS(3); +DECLARE_MSM_GPIO_PINS(4); +DECLARE_MSM_GPIO_PINS(5); +DECLARE_MSM_GPIO_PINS(6); +DECLARE_MSM_GPIO_PINS(7); +DECLARE_MSM_GPIO_PINS(8); +DECLARE_MSM_GPIO_PINS(9); +DECLARE_MSM_GPIO_PINS(10); +DECLARE_MSM_GPIO_PINS(11); +DECLARE_MSM_GPIO_PINS(12); +DECLARE_MSM_GPIO_PINS(13); +DECLARE_MSM_GPIO_PINS(14); +DECLARE_MSM_GPIO_PINS(15); +DECLARE_MSM_GPIO_PINS(16); +DECLARE_MSM_GPIO_PINS(17); +DECLARE_MSM_GPIO_PINS(18); +DECLARE_MSM_GPIO_PINS(19); +DECLARE_MSM_GPIO_PINS(20); +DECLARE_MSM_GPIO_PINS(21); +DECLARE_MSM_GPIO_PINS(22); +DECLARE_MSM_GPIO_PINS(23); +DECLARE_MSM_GPIO_PINS(24); +DECLARE_MSM_GPIO_PINS(25); +DECLARE_MSM_GPIO_PINS(26); +DECLARE_MSM_GPIO_PINS(27); +DECLARE_MSM_GPIO_PINS(28); +DECLARE_MSM_GPIO_PINS(29); +DECLARE_MSM_GPIO_PINS(30); +DECLARE_MSM_GPIO_PINS(31); +DECLARE_MSM_GPIO_PINS(32); +DECLARE_MSM_GPIO_PINS(33); +DECLARE_MSM_GPIO_PINS(34); +DECLARE_MSM_GPIO_PINS(35); +DECLARE_MSM_GPIO_PINS(36); +DECLARE_MSM_GPIO_PINS(37); +DECLARE_MSM_GPIO_PINS(38); +DECLARE_MSM_GPIO_PINS(39); +DECLARE_MSM_GPIO_PINS(40); +DECLARE_MSM_GPIO_PINS(41); +DECLARE_MSM_GPIO_PINS(42); +DECLARE_MSM_GPIO_PINS(43); +DECLARE_MSM_GPIO_PINS(44); +DECLARE_MSM_GPIO_PINS(45); +DECLARE_MSM_GPIO_PINS(46); +DECLARE_MSM_GPIO_PINS(47); +DECLARE_MSM_GPIO_PINS(48); +DECLARE_MSM_GPIO_PINS(49); +DECLARE_MSM_GPIO_PINS(50); +DECLARE_MSM_GPIO_PINS(51); +DECLARE_MSM_GPIO_PINS(52); +DECLARE_MSM_GPIO_PINS(53); +DECLARE_MSM_GPIO_PINS(54); +DECLARE_MSM_GPIO_PINS(55); +DECLARE_MSM_GPIO_PINS(56); +DECLARE_MSM_GPIO_PINS(57); +DECLARE_MSM_GPIO_PINS(58); +DECLARE_MSM_GPIO_PINS(59); +DECLARE_MSM_GPIO_PINS(60); +DECLARE_MSM_GPIO_PINS(61); +DECLARE_MSM_GPIO_PINS(62); +DECLARE_MSM_GPIO_PINS(63); +DECLARE_MSM_GPIO_PINS(64); +DECLARE_MSM_GPIO_PINS(65); +DECLARE_MSM_GPIO_PINS(66); +DECLARE_MSM_GPIO_PINS(67); +DECLARE_MSM_GPIO_PINS(68); +DECLARE_MSM_GPIO_PINS(69); +DECLARE_MSM_GPIO_PINS(70); +DECLARE_MSM_GPIO_PINS(71); +DECLARE_MSM_GPIO_PINS(72); +DECLARE_MSM_GPIO_PINS(73); +DECLARE_MSM_GPIO_PINS(74); +DECLARE_MSM_GPIO_PINS(75); +DECLARE_MSM_GPIO_PINS(76); +DECLARE_MSM_GPIO_PINS(77); +DECLARE_MSM_GPIO_PINS(78); +DECLARE_MSM_GPIO_PINS(79); +DECLARE_MSM_GPIO_PINS(80); +DECLARE_MSM_GPIO_PINS(81); +DECLARE_MSM_GPIO_PINS(82); +DECLARE_MSM_GPIO_PINS(83); +DECLARE_MSM_GPIO_PINS(84); +DECLARE_MSM_GPIO_PINS(85); +DECLARE_MSM_GPIO_PINS(86); +DECLARE_MSM_GPIO_PINS(87); +DECLARE_MSM_GPIO_PINS(88); +DECLARE_MSM_GPIO_PINS(89); +DECLARE_MSM_GPIO_PINS(90); +DECLARE_MSM_GPIO_PINS(91); +DECLARE_MSM_GPIO_PINS(92); +DECLARE_MSM_GPIO_PINS(93); +DECLARE_MSM_GPIO_PINS(94); +DECLARE_MSM_GPIO_PINS(95); +DECLARE_MSM_GPIO_PINS(96); +DECLARE_MSM_GPIO_PINS(97); +DECLARE_MSM_GPIO_PINS(98); +DECLARE_MSM_GPIO_PINS(99); +DECLARE_MSM_GPIO_PINS(100); +DECLARE_MSM_GPIO_PINS(101); +DECLARE_MSM_GPIO_PINS(102); +DECLARE_MSM_GPIO_PINS(103); +DECLARE_MSM_GPIO_PINS(104); +DECLARE_MSM_GPIO_PINS(105); +DECLARE_MSM_GPIO_PINS(106); +DECLARE_MSM_GPIO_PINS(107); +DECLARE_MSM_GPIO_PINS(108); +DECLARE_MSM_GPIO_PINS(109); +DECLARE_MSM_GPIO_PINS(110); +DECLARE_MSM_GPIO_PINS(111); +DECLARE_MSM_GPIO_PINS(112); + +static const unsigned int ufs_reset_pins[] = { 113 }; +static const unsigned int sdc1_rclk_pins[] = { 114 }; +static const unsigned int sdc1_clk_pins[] = { 115 }; +static const unsigned int sdc1_cmd_pins[] = { 116 }; +static const unsigned int sdc1_data_pins[] = { 117 }; +static const unsigned int sdc2_clk_pins[] = { 118 }; +static const unsigned int sdc2_cmd_pins[] = { 119 }; +static const unsigned int sdc2_data_pins[] = { 120 }; + +enum sm6115_functions { + msm_mux_adsp_ext, + msm_mux_agera_pll, + msm_mux_atest, + msm_mux_cam_mclk, + msm_mux_cci_async, + msm_mux_cci_i2c, + msm_mux_cci_timer, + msm_mux_cri_trng, + msm_mux_dac_calib, + msm_mux_dbg_out, + msm_mux_ddr_bist, + msm_mux_ddr_pxi0, + msm_mux_ddr_pxi1, + msm_mux_ddr_pxi2, + msm_mux_ddr_pxi3, + msm_mux_gcc_gp1, + msm_mux_gcc_gp2, + msm_mux_gcc_gp3, + msm_mux_gpio, + msm_mux_gp_pdm0, + msm_mux_gp_pdm1, + msm_mux_gp_pdm2, + msm_mux_gsm0_tx, + msm_mux_gsm1_tx, + msm_mux_jitter_bist, + msm_mux_mdp_vsync, + msm_mux_mdp_vsync_out_0, + msm_mux_mdp_vsync_out_1, + msm_mux_mpm_pwr, + msm_mux_mss_lte, + msm_mux_m_voc, + msm_mux_nav_gpio, + msm_mux_pa_indicator, + msm_mux_pbs, + msm_mux_pbs_out, + msm_mux_phase_flag, + msm_mux_pll_bist, + msm_mux_pll_bypassnl, + msm_mux_pll_reset, + msm_mux_prng_rosc, + msm_mux_qdss_cti, + msm_mux_qdss_gpio, + msm_mux_qup0, + msm_mux_qup1, + msm_mux_qup2, + msm_mux_qup3, + msm_mux_qup4, + msm_mux_qup5, + msm_mux_sdc1_tb, + msm_mux_sdc2_tb, + msm_mux_sd_write, + msm_mux_ssbi_wtr1, + msm_mux_tgu, + msm_mux_tsense_pwm, + msm_mux_uim1_clk, + msm_mux_uim1_data, + msm_mux_uim1_present, + msm_mux_uim1_reset, + msm_mux_uim2_clk, + msm_mux_uim2_data, + msm_mux_uim2_present, + msm_mux_uim2_reset, + msm_mux_usb_phy, + msm_mux_vfr_1, + msm_mux_vsense_trigger, + msm_mux_wlan1_adc0, + msm_mux_wlan1_adc1, + msm_mux__, +}; + +static const char * const qup0_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio82", "gpio86", +}; +static const char * const gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14", + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35", + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49", + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56", + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70", + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77", + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84", + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91", + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98", + "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104", + "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110", + "gpio111", "gpio112", +}; +static const char * const ddr_bist_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", +}; +static const char * const phase_flag_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", + "gpio14", "gpio15", "gpio16", "gpio17", "gpio22", "gpio23", "gpio24", + "gpio25", "gpio26", "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", + "gpio35", "gpio36", "gpio43", "gpio44", "gpio45", "gpio63", "gpio64", + "gpio102", "gpio103", "gpio104", "gpio105", +}; +static const char * const qdss_gpio_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio8", "gpio9", "gpio10", + "gpio11", "gpio14", "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", + "gpio20", "gpio21", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", + "gpio47", "gpio48", "gpio69", "gpio70", "gpio87", "gpio90", "gpio91", + "gpio94", "gpio95", "gpio104", "gpio105", "gpio106", "gpio107", + "gpio109", "gpio110", +}; +static const char * const atest_groups[] = { + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio29", "gpio30", + "gpio31", "gpio32", "gpio33", "gpio86", "gpio87", "gpio88", "gpio89", + "gpio100", "gpio101", +}; +static const char * const mpm_pwr_groups[] = { + "gpio1", +}; +static const char * const m_voc_groups[] = { + "gpio0", +}; +static const char * const dac_calib_groups[] = { + "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio14", "gpio15", + "gpio16", "gpio17", "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio80", "gpio81", + "gpio82", "gpio102", "gpio103", "gpio104", "gpio105" +}; +static const char * const qup1_groups[] = { + "gpio4", "gpio5", "gpio69", "gpio70", +}; +static const char * const cri_trng_groups[] = { + "gpio4", "gpio5", "gpio18", +}; +static const char * const qup2_groups[] = { + "gpio6", "gpio7", "gpio71", "gpio80", +}; +static const char * const qup3_groups[] = { + "gpio8", "gpio9", "gpio10", "gpio11", +}; +static const char * const pbs_out_groups[] = { + "gpio8", "gpio9", "gpio52", +}; +static const char * const pll_bist_groups[] = { + "gpio8", "gpio9", +}; +static const char * const tsense_pwm_groups[] = { + "gpio8", +}; +static const char * const agera_pll_groups[] = { + "gpio10", "gpio11", +}; +static const char * const pbs_groups[] = { + "gpio10", "gpio11", "gpio18", "gpio19", "gpio20", "gpio21", "gpio22", + "gpio23", "gpio24", "gpio25", "gpio26", "gpio47", "gpio48", "gpio87", + "gpio90", "gpio91", +}; +static const char * const qup4_groups[] = { + "gpio12", "gpio13", "gpio96", "gpio97", +}; +static const char * const tgu_groups[] = { + "gpio12", "gpio13", "gpio14", "gpio15", +}; +static const char * const qup5_groups[] = { + "gpio14", "gpio15", "gpio16", "gpio17", +}; +static const char * const sdc2_tb_groups[] = { + "gpio18", +}; +static const char * const sdc1_tb_groups[] = { + "gpio19", +}; +static const char * const cam_mclk_groups[] = { + "gpio20", "gpio21", "gpio27", "gpio28", +}; +static const char * const adsp_ext_groups[] = { + "gpio21", +}; +static const char * const cci_i2c_groups[] = { + "gpio22", "gpio23", "gpio29", "gpio30", +}; +static const char * const prng_rosc_groups[] = { + "gpio22", "gpio23", +}; +static const char * const cci_timer_groups[] = { + "gpio24", "gpio25", "gpio28", "gpio32", +}; +static const char * const gcc_gp1_groups[] = { + "gpio24", "gpio86", +}; +static const char * const cci_async_groups[] = { + "gpio25", +}; +static const char * const vsense_trigger_groups[] = { + "gpio26", +}; +static const char * const qdss_cti_groups[] = { + "gpio27", "gpio28", "gpio72", "gpio73", "gpio96", "gpio97", +}; +static const char * const gp_pdm0_groups[] = { + "gpio31", "gpio95", +}; +static const char * const gp_pdm1_groups[] = { + "gpio32", "gpio96", +}; +static const char * const gp_pdm2_groups[] = { + "gpio33", "gpio97", +}; +static const char * const nav_gpio_groups[] = { + "gpio42", "gpio47", "gpio52", "gpio95", "gpio96", "gpio97", "gpio106", + "gpio107", "gpio108", +}; +static const char * const vfr_1_groups[] = { + "gpio48", +}; +static const char * const pa_indicator_groups[] = { + "gpio49", +}; +static const char * const gsm1_tx_groups[] = { + "gpio53", +}; +static const char * const ssbi_wtr1_groups[] = { + "gpio59", "gpio60", +}; +static const char * const pll_bypassnl_groups[] = { + "gpio62", +}; +static const char * const pll_reset_groups[] = { + "gpio63", +}; +static const char * const ddr_pxi0_groups[] = { + "gpio63", "gpio64", +}; +static const char * const gsm0_tx_groups[] = { + "gpio64", +}; +static const char * const gcc_gp2_groups[] = { + "gpio69", "gpio107", +}; +static const char * const ddr_pxi1_groups[] = { + "gpio69", "gpio70", +}; +static const char * const gcc_gp3_groups[] = { + "gpio70", "gpio106", +}; +static const char * const dbg_out_groups[] = { + "gpio71", +}; +static const char * const uim2_data_groups[] = { + "gpio72", +}; +static const char * const uim2_clk_groups[] = { + "gpio73", +}; +static const char * const uim2_reset_groups[] = { + "gpio74", +}; +static const char * const uim2_present_groups[] = { + "gpio75", +}; +static const char * const uim1_data_groups[] = { + "gpio76", +}; +static const char * const uim1_clk_groups[] = { + "gpio77", +}; +static const char * const uim1_reset_groups[] = { + "gpio78", +}; +static const char * const uim1_present_groups[] = { + "gpio79", +}; +static const char * const mdp_vsync_groups[] = { + "gpio81", "gpio96", "gpio97", +}; +static const char * const mdp_vsync_out_0_groups[] = { + "gpio81", +}; +static const char * const mdp_vsync_out_1_groups[] = { + "gpio81", +}; +static const char * const usb_phy_groups[] = { + "gpio89", +}; +static const char * const mss_lte_groups[] = { + "gpio90", "gpio91", +}; +static const char * const wlan1_adc0_groups[] = { + "gpio94", +}; +static const char * const wlan1_adc1_groups[] = { + "gpio95", +}; +static const char * const sd_write_groups[] = { + "gpio96", +}; +static const char * const jitter_bist_groups[] = { + "gpio96", "gpio97", +}; +static const char * const ddr_pxi2_groups[] = { + "gpio102", "gpio103", +}; +static const char * const ddr_pxi3_groups[] = { + "gpio104", "gpio105", +}; + +static const struct msm_function sm6115_functions[] = { + FUNCTION(adsp_ext), + FUNCTION(agera_pll), + FUNCTION(atest), + FUNCTION(cam_mclk), + FUNCTION(cci_async), + FUNCTION(cci_i2c), + FUNCTION(cci_timer), + FUNCTION(cri_trng), + FUNCTION(dac_calib), + FUNCTION(dbg_out), + FUNCTION(ddr_bist), + FUNCTION(ddr_pxi0), + FUNCTION(ddr_pxi1), + FUNCTION(ddr_pxi2), + FUNCTION(ddr_pxi3), + FUNCTION(gcc_gp1), + FUNCTION(gcc_gp2), + FUNCTION(gcc_gp3), + FUNCTION(gpio), + FUNCTION(gp_pdm0), + FUNCTION(gp_pdm1), + FUNCTION(gp_pdm2), + FUNCTION(gsm0_tx), + FUNCTION(gsm1_tx), + FUNCTION(jitter_bist), + FUNCTION(mdp_vsync), + FUNCTION(mdp_vsync_out_0), + FUNCTION(mdp_vsync_out_1), + FUNCTION(mpm_pwr), + FUNCTION(mss_lte), + FUNCTION(m_voc), + FUNCTION(nav_gpio), + FUNCTION(pa_indicator), + FUNCTION(pbs), + FUNCTION(pbs_out), + FUNCTION(phase_flag), + FUNCTION(pll_bist), + FUNCTION(pll_bypassnl), + FUNCTION(pll_reset), + FUNCTION(prng_rosc), + FUNCTION(qdss_cti), + FUNCTION(qdss_gpio), + FUNCTION(qup0), + FUNCTION(qup1), + FUNCTION(qup2), + FUNCTION(qup3), + FUNCTION(qup4), + FUNCTION(qup5), + FUNCTION(sdc1_tb), + FUNCTION(sdc2_tb), + FUNCTION(sd_write), + FUNCTION(ssbi_wtr1), + FUNCTION(tgu), + FUNCTION(tsense_pwm), + FUNCTION(uim1_clk), + FUNCTION(uim1_data), + FUNCTION(uim1_present), + FUNCTION(uim1_reset), + FUNCTION(uim2_clk), + FUNCTION(uim2_data), + FUNCTION(uim2_present), + FUNCTION(uim2_reset), + FUNCTION(usb_phy), + FUNCTION(vfr_1), + FUNCTION(vsense_trigger), + FUNCTION(wlan1_adc0), + FUNCTION(wlan1_adc1), +}; + +/* Every pin is maintained as a single group, and missing or non-existing pin + * would be maintained as dummy group to synchronize pin group index with + * pin descriptor registered with pinctrl core. + * Clients would not be able to request these dummy pin groups. + */ +static const struct msm_pingroup sm6115_groups[] = { + [0] = PINGROUP(0, WEST, qup0, m_voc, ddr_bist, _, phase_flag, qdss_gpio, atest, _, _), + [1] = PINGROUP(1, WEST, qup0, mpm_pwr, ddr_bist, _, phase_flag, qdss_gpio, atest, _, _), + [2] = PINGROUP(2, WEST, qup0, ddr_bist, _, phase_flag, qdss_gpio, dac_calib, atest, _, _), + [3] = PINGROUP(3, WEST, qup0, ddr_bist, _, phase_flag, qdss_gpio, dac_calib, atest, _, _), + [4] = PINGROUP(4, WEST, qup1, cri_trng, _, phase_flag, dac_calib, atest, _, _, _), + [5] = PINGROUP(5, WEST, qup1, cri_trng, _, phase_flag, dac_calib, atest, _, _, _), + [6] = PINGROUP(6, WEST, qup2, _, phase_flag, dac_calib, atest, _, _, _, _), + [7] = PINGROUP(7, WEST, qup2, _, _, _, _, _, _, _, _), + [8] = PINGROUP(8, EAST, qup3, pbs_out, pll_bist, _, qdss_gpio, _, tsense_pwm, _, _), + [9] = PINGROUP(9, EAST, qup3, pbs_out, pll_bist, _, qdss_gpio, _, _, _, _), + [10] = PINGROUP(10, EAST, qup3, agera_pll, _, pbs, qdss_gpio, _, _, _, _), + [11] = PINGROUP(11, EAST, qup3, agera_pll, _, pbs, qdss_gpio, _, _, _, _), + [12] = PINGROUP(12, WEST, qup4, tgu, _, _, _, _, _, _, _), + [13] = PINGROUP(13, WEST, qup4, tgu, _, _, _, _, _, _, _), + [14] = PINGROUP(14, WEST, qup5, tgu, _, phase_flag, qdss_gpio, dac_calib, _, _, _), + [15] = PINGROUP(15, WEST, qup5, tgu, _, phase_flag, qdss_gpio, dac_calib, _, _, _), + [16] = PINGROUP(16, WEST, qup5, _, phase_flag, qdss_gpio, dac_calib, _, _, _, _), + [17] = PINGROUP(17, WEST, qup5, _, phase_flag, qdss_gpio, dac_calib, _, _, _, _), + [18] = PINGROUP(18, EAST, sdc2_tb, cri_trng, pbs, qdss_gpio, _, _, _, _, _), + [19] = PINGROUP(19, EAST, sdc1_tb, pbs, qdss_gpio, _, _, _, _, _, _), + [20] = PINGROUP(20, EAST, cam_mclk, pbs, qdss_gpio, _, _, _, _, _, _), + [21] = PINGROUP(21, EAST, cam_mclk, adsp_ext, pbs, qdss_gpio, _, _, _, _, _), + [22] = PINGROUP(22, EAST, cci_i2c, prng_rosc, _, pbs, phase_flag, qdss_gpio, dac_calib, atest, _), + [23] = PINGROUP(23, EAST, cci_i2c, prng_rosc, _, pbs, phase_flag, qdss_gpio, dac_calib, atest, _), + [24] = PINGROUP(24, EAST, cci_timer, gcc_gp1, _, pbs, phase_flag, qdss_gpio, dac_calib, atest, _), + [25] = PINGROUP(25, EAST, cci_async, cci_timer, _, pbs, phase_flag, qdss_gpio, dac_calib, atest, _), + [26] = PINGROUP(26, EAST, _, pbs, phase_flag, qdss_gpio, dac_calib, atest, vsense_trigger, _, _), + [27] = PINGROUP(27, EAST, cam_mclk, qdss_cti, _, _, _, _, _, _, _), + [28] = PINGROUP(28, EAST, cam_mclk, cci_timer, qdss_cti, _, _, _, _, _, _), + [29] = PINGROUP(29, EAST, cci_i2c, _, phase_flag, dac_calib, atest, _, _, _, _), + [30] = PINGROUP(30, EAST, cci_i2c, _, phase_flag, dac_calib, atest, _, _, _, _), + [31] = PINGROUP(31, EAST, gp_pdm0, _, phase_flag, dac_calib, atest, _, _, _, _), + [32] = PINGROUP(32, EAST, cci_timer, gp_pdm1, _, phase_flag, dac_calib, atest, _, _, _), + [33] = PINGROUP(33, EAST, gp_pdm2, _, phase_flag, dac_calib, atest, _, _, _, _), + [34] = PINGROUP(34, EAST, _, _, _, _, _, _, _, _, _), + [35] = PINGROUP(35, EAST, _, phase_flag, _, _, _, _, _, _, _), + [36] = PINGROUP(36, EAST, _, phase_flag, _, _, _, _, _, _, _), + [37] = PINGROUP(37, EAST, _, _, _, _, _, _, _, _, _), + [38] = PINGROUP(38, EAST, _, _, _, _, _, _, _, _, _), + [39] = PINGROUP(39, EAST, _, _, _, _, _, _, _, _, _), + [40] = PINGROUP(40, EAST, _, _, _, _, _, _, _, _, _), + [41] = PINGROUP(41, EAST, _, _, _, _, _, _, _, _, _), + [42] = PINGROUP(42, EAST, _, nav_gpio, _, _, _, _, _, _, _), + [43] = PINGROUP(43, EAST, _, _, phase_flag, _, _, _, _, _, _), + [44] = PINGROUP(44, EAST, _, _, phase_flag, _, _, _, _, _, _), + [45] = PINGROUP(45, EAST, _, _, phase_flag, _, _, _, _, _, _), + [46] = PINGROUP(46, EAST, _, _, _, _, _, _, _, _, _), + [47] = PINGROUP(47, EAST, _, nav_gpio, pbs, qdss_gpio, _, _, _, _, _), + [48] = PINGROUP(48, EAST, _, vfr_1, _, pbs, qdss_gpio, _, _, _, _), + [49] = PINGROUP(49, EAST, _, pa_indicator, _, _, _, _, _, _, _), + [50] = PINGROUP(50, EAST, _, _, _, _, _, _, _, _, _), + [51] = PINGROUP(51, EAST, _, _, _, _, _, _, _, _, _), + [52] = PINGROUP(52, EAST, _, nav_gpio, pbs_out, _, _, _, _, _, _), + [53] = PINGROUP(53, EAST, _, gsm1_tx, _, _, _, _, _, _, _), + [54] = PINGROUP(54, EAST, _, _, _, _, _, _, _, _, _), + [55] = PINGROUP(55, EAST, _, _, _, _, _, _, _, _, _), + [56] = PINGROUP(56, EAST, _, _, _, _, _, _, _, _, _), + [57] = PINGROUP(57, EAST, _, _, _, _, _, _, _, _, _), + [58] = PINGROUP(58, EAST, _, _, _, _, _, _, _, _, _), + [59] = PINGROUP(59, EAST, _, ssbi_wtr1, _, _, _, _, _, _, _), + [60] = PINGROUP(60, EAST, _, ssbi_wtr1, _, _, _, _, _, _, _), + [61] = PINGROUP(61, EAST, _, _, _, _, _, _, _, _, _), + [62] = PINGROUP(62, EAST, _, pll_bypassnl, _, _, _, _, _, _, _), + [63] = PINGROUP(63, EAST, pll_reset, _, phase_flag, ddr_pxi0, _, _, _, _, _), + [64] = PINGROUP(64, EAST, gsm0_tx, _, phase_flag, ddr_pxi0, _, _, _, _, _), + [65] = PINGROUP(65, WEST, _, _, _, _, _, _, _, _, _), + [66] = PINGROUP(66, WEST, _, _, _, _, _, _, _, _, _), + [67] = PINGROUP(67, WEST, _, _, _, _, _, _, _, _, _), + [68] = PINGROUP(68, WEST, _, _, _, _, _, _, _, _, _), + [69] = PINGROUP(69, WEST, qup1, gcc_gp2, qdss_gpio, ddr_pxi1, _, _, _, _, _), + [70] = PINGROUP(70, WEST, qup1, gcc_gp3, qdss_gpio, ddr_pxi1, _, _, _, _, _), + [71] = PINGROUP(71, WEST, qup2, dbg_out, _, _, _, _, _, _, _), + [72] = PINGROUP(72, SOUTH, uim2_data, qdss_cti, _, _, _, _, _, _, _), + [73] = PINGROUP(73, SOUTH, uim2_clk, _, qdss_cti, _, _, _, _, _, _), + [74] = PINGROUP(74, SOUTH, uim2_reset, _, _, _, _, _, _, _, _), + [75] = PINGROUP(75, SOUTH, uim2_present, _, _, _, _, _, _, _, _), + [76] = PINGROUP(76, SOUTH, uim1_data, _, _, _, _, _, _, _, _), + [77] = PINGROUP(77, SOUTH, uim1_clk, _, _, _, _, _, _, _, _), + [78] = PINGROUP(78, SOUTH, uim1_reset, _, _, _, _, _, _, _, _), + [79] = PINGROUP(79, SOUTH, uim1_present, _, _, _, _, _, _, _, _), + [80] = PINGROUP(80, WEST, qup2, dac_calib, _, _, _, _, _, _, _), + [81] = PINGROUP(81, WEST, mdp_vsync_out_0, mdp_vsync_out_1, mdp_vsync, dac_calib, _, _, _, _, _), + [82] = PINGROUP(82, WEST, qup0, dac_calib, _, _, _, _, _, _, _), + [83] = PINGROUP(83, WEST, _, _, _, _, _, _, _, _, _), + [84] = PINGROUP(84, WEST, _, _, _, _, _, _, _, _, _), + [85] = PINGROUP(85, WEST, _, _, _, _, _, _, _, _, _), + [86] = PINGROUP(86, WEST, qup0, gcc_gp1, atest, _, _, _, _, _, _), + [87] = PINGROUP(87, EAST, pbs, qdss_gpio, _, _, _, _, _, _, _), + [88] = PINGROUP(88, EAST, _, _, _, _, _, _, _, _, _), + [89] = PINGROUP(89, WEST, usb_phy, atest, _, _, _, _, _, _, _), + [90] = PINGROUP(90, EAST, mss_lte, pbs, qdss_gpio, _, _, _, _, _, _), + [91] = PINGROUP(91, EAST, mss_lte, pbs, qdss_gpio, _, _, _, _, _, _), + [92] = PINGROUP(92, WEST, _, _, _, _, _, _, _, _, _), + [93] = PINGROUP(93, WEST, _, _, _, _, _, _, _, _, _), + [94] = PINGROUP(94, WEST, _, qdss_gpio, wlan1_adc0, _, _, _, _, _, _), + [95] = PINGROUP(95, WEST, nav_gpio, gp_pdm0, qdss_gpio, wlan1_adc1, _, _, _, _, _), + [96] = PINGROUP(96, WEST, qup4, nav_gpio, mdp_vsync, gp_pdm1, sd_write, jitter_bist, qdss_cti, qdss_cti, _), + [97] = PINGROUP(97, WEST, qup4, nav_gpio, mdp_vsync, gp_pdm2, jitter_bist, qdss_cti, qdss_cti, _, _), + [98] = PINGROUP(98, SOUTH, _, _, _, _, _, _, _, _, _), + [99] = PINGROUP(99, SOUTH, _, _, _, _, _, _, _, _, _), + [100] = PINGROUP(100, SOUTH, atest, _, _, _, _, _, _, _, _), + [101] = PINGROUP(101, SOUTH, atest, _, _, _, _, _, _, _, _), + [102] = PINGROUP(102, SOUTH, _, phase_flag, dac_calib, ddr_pxi2, _, _, _, _, _), + [103] = PINGROUP(103, SOUTH, _, phase_flag, dac_calib, ddr_pxi2, _, _, _, _, _), + [104] = PINGROUP(104, SOUTH, _, phase_flag, qdss_gpio, dac_calib, ddr_pxi3, _, _, _, _), + [105] = PINGROUP(105, SOUTH, _, phase_flag, qdss_gpio, dac_calib, ddr_pxi3, _, _, _, _), + [106] = PINGROUP(106, SOUTH, nav_gpio, gcc_gp3, qdss_gpio, _, _, _, _, _, _), + [107] = PINGROUP(107, SOUTH, nav_gpio, gcc_gp2, qdss_gpio, _, _, _, _, _, _), + [108] = PINGROUP(108, SOUTH, nav_gpio, _, _, _, _, _, _, _, _), + [109] = PINGROUP(109, SOUTH, _, qdss_gpio, _, _, _, _, _, _, _), + [110] = PINGROUP(110, SOUTH, _, qdss_gpio, _, _, _, _, _, _, _), + [111] = PINGROUP(111, SOUTH, _, _, _, _, _, _, _, _, _), + [112] = PINGROUP(112, SOUTH, _, _, _, _, _, _, _, _, _), + [113] = UFS_RESET(ufs_reset, 0x78000), + [114] = SDC_QDSD_PINGROUP(sdc1_rclk, WEST, 0x75000, 15, 0), + [115] = SDC_QDSD_PINGROUP(sdc1_clk, WEST, 0x75000, 13, 6), + [116] = SDC_QDSD_PINGROUP(sdc1_cmd, WEST, 0x75000, 11, 3), + [117] = SDC_QDSD_PINGROUP(sdc1_data, WEST, 0x75000, 9, 0), + [118] = SDC_QDSD_PINGROUP(sdc2_clk, SOUTH, 0x73000, 14, 6), + [119] = SDC_QDSD_PINGROUP(sdc2_cmd, SOUTH, 0x73000, 11, 3), + [120] = SDC_QDSD_PINGROUP(sdc2_data, SOUTH, 0x73000, 9, 0), +}; + +static const struct msm_pinctrl_soc_data sm6115_tlmm = { + .pins = sm6115_pins, + .npins = ARRAY_SIZE(sm6115_pins), + .functions = sm6115_functions, + .nfunctions = ARRAY_SIZE(sm6115_functions), + .groups = sm6115_groups, + .ngroups = ARRAY_SIZE(sm6115_groups), + .ngpios = 114, + .tiles = sm6115_tiles, + .ntiles = ARRAY_SIZE(sm6115_tiles), +}; + +static int sm6115_tlmm_probe(struct platform_device *pdev) +{ + return msm_pinctrl_probe(pdev, &sm6115_tlmm); +} + +static const struct of_device_id sm6115_tlmm_of_match[] = { + { .compatible = "qcom,sm6115-tlmm", }, + { } +}; + +static struct platform_driver sm6115_tlmm_driver = { + .driver = { + .name = "sm6115-tlmm", + .of_match_table = sm6115_tlmm_of_match, + }, + .probe = sm6115_tlmm_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init sm6115_tlmm_init(void) +{ + return platform_driver_register(&sm6115_tlmm_driver); +} +arch_initcall(sm6115_tlmm_init); + +static void __exit sm6115_tlmm_exit(void) +{ + platform_driver_unregister(&sm6115_tlmm_driver); +} +module_exit(sm6115_tlmm_exit); + +MODULE_DESCRIPTION("QTI sm6115 tlmm driver"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(of, sm6115_tlmm_of_match); diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c index a89d24a040af..98bf0e2a2a8d 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c @@ -1104,39 +1104,42 @@ static int pmic_gpio_remove(struct platform_device *pdev) } static const struct of_device_id pmic_gpio_of_match[] = { - { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm8916-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm8941-gpio", .data = (void *) 36 }, - /* pm8950 has 8 GPIOs with holes on 3 */ - { .compatible = "qcom,pm8950-gpio", .data = (void *) 8 }, - { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 }, - { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 }, - { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 }, - { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 }, - { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, - { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, - /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ - { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, /* pm660 has 13 GPIOs with holes on 1, 5, 6, 7, 8 and 10 */ { .compatible = "qcom,pm660-gpio", .data = (void *) 13 }, /* pm660l has 12 GPIOs with holes on 1, 2, 10, 11 and 12 */ { .compatible = "qcom,pm660l-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pm8005-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 }, /* pm8150 has 10 GPIOs with holes on 2, 5, 7 and 8 */ { .compatible = "qcom,pm8150-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pmc8180-gpio", .data = (void *) 10 }, /* pm8150b has 12 GPIOs with holes on 3, r and 7 */ { .compatible = "qcom,pm8150b-gpio", .data = (void *) 12 }, /* pm8150l has 12 GPIOs with holes on 7 */ { .compatible = "qcom,pm8150l-gpio", .data = (void *) 12 }, + { .compatible = "qcom,pmc8180c-gpio", .data = (void *) 12 }, { .compatible = "qcom,pm8350-gpio", .data = (void *) 10 }, { .compatible = "qcom,pm8350b-gpio", .data = (void *) 8 }, { .compatible = "qcom,pm8350c-gpio", .data = (void *) 9 }, + { .compatible = "qcom,pm8916-gpio", .data = (void *) 4 }, + { .compatible = "qcom,pm8941-gpio", .data = (void *) 36 }, + /* pm8950 has 8 GPIOs with holes on 3 */ + { .compatible = "qcom,pm8950-gpio", .data = (void *) 8 }, + { .compatible = "qcom,pm8994-gpio", .data = (void *) 22 }, + { .compatible = "qcom,pm8998-gpio", .data = (void *) 26 }, + { .compatible = "qcom,pma8084-gpio", .data = (void *) 22 }, + { .compatible = "qcom,pmi8950-gpio", .data = (void *) 2 }, + { .compatible = "qcom,pmi8994-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pmi8998-gpio", .data = (void *) 14 }, { .compatible = "qcom,pmk8350-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm7325-gpio", .data = (void *) 10 }, + { .compatible = "qcom,pmm8155au-gpio", .data = (void *) 10 }, { .compatible = "qcom,pmr735a-gpio", .data = (void *) 4 }, { .compatible = "qcom,pmr735b-gpio", .data = (void *) 4 }, - { .compatible = "qcom,pm6150-gpio", .data = (void *) 10 }, - { .compatible = "qcom,pm6150l-gpio", .data = (void *) 12 }, - { .compatible = "qcom,pm8008-gpio", .data = (void *) 2 }, + /* pms405 has 12 GPIOs with holes on 1, 9, and 10 */ + { .compatible = "qcom,pms405-gpio", .data = (void *) 12 }, /* pmx55 has 11 GPIOs with holes on 3, 7, 10, 11 */ { .compatible = "qcom,pmx55-gpio", .data = (void *) 11 }, { }, diff --git a/drivers/pinctrl/renesas/Kconfig b/drivers/pinctrl/renesas/Kconfig index 4b84a744ae87..9a72999084b3 100644 --- a/drivers/pinctrl/renesas/Kconfig +++ b/drivers/pinctrl/renesas/Kconfig @@ -37,6 +37,7 @@ config PINCTRL_RENESAS select PINCTRL_PFC_R8A77990 if ARCH_R8A77990 select PINCTRL_PFC_R8A77995 if ARCH_R8A77995 select PINCTRL_PFC_R8A779A0 if ARCH_R8A779A0 + select PINCTRL_RZG2L if ARCH_R9A07G044 select PINCTRL_PFC_SH7203 if CPU_SUBTYPE_SH7203 select PINCTRL_PFC_SH7264 if CPU_SUBTYPE_SH7264 select PINCTRL_PFC_SH7269 if CPU_SUBTYPE_SH7269 @@ -176,6 +177,16 @@ config PINCTRL_RZA2 help This selects GPIO and pinctrl driver for Renesas RZ/A2 platforms. +config PINCTRL_RZG2L + bool "pin control support for RZ/G2L" if COMPILE_TEST + depends on OF + select GPIOLIB + select GENERIC_PINCTRL_GROUPS + select GENERIC_PINMUX_FUNCTIONS + select GENERIC_PINCONF + help + This selects GPIO and pinctrl driver for Renesas RZ/G2L platforms. + config PINCTRL_PFC_R8A77470 bool "pin control support for RZ/G1C" if COMPILE_TEST select PINCTRL_SH_PFC diff --git a/drivers/pinctrl/renesas/Makefile b/drivers/pinctrl/renesas/Makefile index 353563228dc2..7d9238a9ef57 100644 --- a/drivers/pinctrl/renesas/Makefile +++ b/drivers/pinctrl/renesas/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_PFC_SHX3) += pfc-shx3.o obj-$(CONFIG_PINCTRL_RZA1) += pinctrl-rza1.o obj-$(CONFIG_PINCTRL_RZA2) += pinctrl-rza2.o +obj-$(CONFIG_PINCTRL_RZG2L) += pinctrl-rzg2l.o obj-$(CONFIG_PINCTRL_RZN1) += pinctrl-rzn1.o ifeq ($(CONFIG_COMPILE_TEST),y) diff --git a/drivers/pinctrl/renesas/core.c b/drivers/pinctrl/renesas/core.c index 5ccc49b387f1..f2ab02225837 100644 --- a/drivers/pinctrl/renesas/core.c +++ b/drivers/pinctrl/renesas/core.c @@ -571,17 +571,21 @@ static const struct of_device_id sh_pfc_of_table[] = { .data = &r8a7794_pinmux_info, }, #endif -/* Both r8a7795 entries must be present to make sanity checks work */ -#ifdef CONFIG_PINCTRL_PFC_R8A77950 +/* + * Both r8a7795 entries must be present to make sanity checks work, but only + * the first entry is actually used. + * R-Car H3 ES1.x is matched using soc_device_match() instead. + */ +#ifdef CONFIG_PINCTRL_PFC_R8A77951 { .compatible = "renesas,pfc-r8a7795", - .data = &r8a77950_pinmux_info, + .data = &r8a77951_pinmux_info, }, #endif -#ifdef CONFIG_PINCTRL_PFC_R8A77951 +#ifdef CONFIG_PINCTRL_PFC_R8A77950 { .compatible = "renesas,pfc-r8a7795", - .data = &r8a77951_pinmux_info, + .data = &r8a77950_pinmux_info, }, #endif #ifdef CONFIG_PINCTRL_PFC_R8A77960 @@ -1085,26 +1089,20 @@ static inline void sh_pfc_check_driver(struct platform_driver *pdrv) {} #ifdef CONFIG_OF static const void *sh_pfc_quirk_match(void) { -#if defined(CONFIG_PINCTRL_PFC_R8A77950) || \ - defined(CONFIG_PINCTRL_PFC_R8A77951) +#ifdef CONFIG_PINCTRL_PFC_R8A77950 const struct soc_device_attribute *match; static const struct soc_device_attribute quirks[] = { { .soc_id = "r8a7795", .revision = "ES1.*", .data = &r8a77950_pinmux_info, }, - { - .soc_id = "r8a7795", - .data = &r8a77951_pinmux_info, - }, - { /* sentinel */ } }; match = soc_device_match(quirks); if (match) - return match->data ?: ERR_PTR(-ENODEV); -#endif /* CONFIG_PINCTRL_PFC_R8A77950 || CONFIG_PINCTRL_PFC_R8A77951 */ + return match->data; +#endif /* CONFIG_PINCTRL_PFC_R8A77950 */ return NULL; } @@ -1119,9 +1117,6 @@ static int sh_pfc_probe(struct platform_device *pdev) #ifdef CONFIG_OF if (pdev->dev.of_node) { info = sh_pfc_quirk_match(); - if (IS_ERR(info)) - return PTR_ERR(info); - if (!info) info = of_device_get_match_data(&pdev->dev); } else diff --git a/drivers/pinctrl/renesas/pfc-r8a77995.c b/drivers/pinctrl/renesas/pfc-r8a77995.c index b479f87a3b23..c56e1e4c13b3 100644 --- a/drivers/pinctrl/renesas/pfc-r8a77995.c +++ b/drivers/pinctrl/renesas/pfc-r8a77995.c @@ -14,16 +14,27 @@ #include <linux/errno.h> #include <linux/kernel.h> +#include "core.h" #include "sh_pfc.h" -#define CPU_ALL_GP(fn, sfx) \ - PORT_GP_9(0, fn, sfx), \ - PORT_GP_32(1, fn, sfx), \ - PORT_GP_32(2, fn, sfx), \ - PORT_GP_CFG_10(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE), \ - PORT_GP_32(4, fn, sfx), \ - PORT_GP_21(5, fn, sfx), \ - PORT_GP_14(6, fn, sfx) +#define CPU_ALL_GP(fn, sfx) \ + PORT_GP_CFG_9(0, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_32(1, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_32(2, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_10(3, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE | SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_32(4, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_21(5, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PORT_GP_CFG_14(6, fn, sfx, SH_PFC_PIN_CFG_PULL_UP_DOWN) + +#define CPU_ALL_NOGP(fn) \ + PIN_NOGP_CFG(DU_DOTCLKIN0, "DU_DOTCLKIN0", fn, SH_PFC_PIN_CFG_PULL_DOWN), \ + PIN_NOGP_CFG(FSCLKST_N, "FSCLKST#", fn, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PIN_NOGP_CFG(MLB_REF, "MLB_REF", fn, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PIN_NOGP_CFG(PRESETOUT_N, "PRESETOUT#", fn, SH_PFC_PIN_CFG_PULL_UP_DOWN), \ + PIN_NOGP_CFG(TCK, "TCK", fn, SH_PFC_PIN_CFG_PULL_UP), \ + PIN_NOGP_CFG(TDI, "TDI", fn, SH_PFC_PIN_CFG_PULL_UP), \ + PIN_NOGP_CFG(TMS, "TMS", fn, SH_PFC_PIN_CFG_PULL_UP), \ + PIN_NOGP_CFG(TRST_N, "TRST#", fn, SH_PFC_PIN_CFG_PULL_UP) /* * F_() : just information @@ -930,8 +941,17 @@ static const u16 pinmux_data[] = { PINMUX_IPSR_GPSR(IP13_7_4, TPU0TO3_A), }; +/* + * Pins not associated with a GPIO port. + */ +enum { + GP_ASSIGN_LAST(), + NOGP_ALL(), +}; + static const struct sh_pfc_pin pinmux_pins[] = { PINMUX_GPIO_GP_ALL(), + PINMUX_NOGP_ALL(), }; /* - AUDIO CLOCK ------------------------------------------------------------- */ @@ -2834,6 +2854,214 @@ static int r8a77995_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *po return bit; } +static const struct pinmux_bias_reg pinmux_bias_regs[] = { + { PINMUX_BIAS_REG("PUEN0", 0xe6060400, "PUD0", 0xe6060440) { + [ 0] = RCAR_GP_PIN(1, 9), /* DU_DG1 */ + [ 1] = RCAR_GP_PIN(1, 8), /* DU_DG0 */ + [ 2] = RCAR_GP_PIN(1, 7), /* DU_DB7 */ + [ 3] = RCAR_GP_PIN(1, 6), /* DU_DB6 */ + [ 4] = RCAR_GP_PIN(1, 5), /* DU_DB5 */ + [ 5] = RCAR_GP_PIN(1, 4), /* DU_DB4 */ + [ 6] = RCAR_GP_PIN(1, 3), /* DU_DB3 */ + [ 7] = RCAR_GP_PIN(1, 2), /* DU_DB2 */ + [ 8] = RCAR_GP_PIN(1, 1), /* DU_DB1 */ + [ 9] = RCAR_GP_PIN(1, 0), /* DU_DB0 */ + [10] = PIN_MLB_REF, /* MLB_REF */ + [11] = RCAR_GP_PIN(0, 8), /* MLB_SIG */ + [12] = RCAR_GP_PIN(0, 7), /* MLB_DAT */ + [13] = RCAR_GP_PIN(0, 6), /* MLB_CLK */ + [14] = RCAR_GP_PIN(0, 5), /* MSIOF2_RXD */ + [15] = RCAR_GP_PIN(0, 4), /* MSIOF2_TXD */ + [16] = RCAR_GP_PIN(0, 3), /* MSIOF2_SCK */ + [17] = RCAR_GP_PIN(0, 2), /* IRQ0_A */ + [18] = RCAR_GP_PIN(0, 1), /* USB0_OVC */ + [19] = RCAR_GP_PIN(0, 0), /* USB0_PWEN */ + [20] = PIN_PRESETOUT_N, /* PRESETOUT# */ + [21] = PIN_DU_DOTCLKIN0, /* DU_DOTCLKIN0 */ + [22] = PIN_FSCLKST_N, /* FSCLKST# */ + [23] = SH_PFC_PIN_NONE, + [24] = SH_PFC_PIN_NONE, + [25] = SH_PFC_PIN_NONE, + [26] = SH_PFC_PIN_NONE, + [27] = SH_PFC_PIN_NONE, + [28] = PIN_TDI, /* TDI */ + [29] = PIN_TMS, /* TMS */ + [30] = PIN_TCK, /* TCK */ + [31] = PIN_TRST_N, /* TRST# */ + } }, + { PINMUX_BIAS_REG("PUEN1", 0xe6060404, "PUD1", 0xe6060444) { + [ 0] = RCAR_GP_PIN(2, 9), /* VI4_DATA8 */ + [ 1] = RCAR_GP_PIN(2, 8), /* VI4_DATA7 */ + [ 2] = RCAR_GP_PIN(2, 7), /* VI4_DATA6 */ + [ 3] = RCAR_GP_PIN(2, 6), /* VI4_DATA5 */ + [ 4] = RCAR_GP_PIN(2, 5), /* VI4_DATA4 */ + [ 5] = RCAR_GP_PIN(2, 4), /* VI4_DATA3 */ + [ 6] = RCAR_GP_PIN(2, 3), /* VI4_DATA2 */ + [ 7] = RCAR_GP_PIN(2, 2), /* VI4_DATA1 */ + [ 8] = RCAR_GP_PIN(2, 1), /* VI4_DATA0 */ + [ 9] = RCAR_GP_PIN(2, 0), /* VI4_CLK */ + [10] = RCAR_GP_PIN(1, 31), /* QPOLB */ + [11] = RCAR_GP_PIN(1, 30), /* QPOLA */ + [12] = RCAR_GP_PIN(1, 29), /* DU_CDE */ + [13] = RCAR_GP_PIN(1, 28), /* DU_DISP/CDE */ + [14] = RCAR_GP_PIN(1, 27), /* DU_DISP */ + [15] = RCAR_GP_PIN(1, 26), /* DU_VSYNC */ + [16] = RCAR_GP_PIN(1, 25), /* DU_HSYNC */ + [17] = RCAR_GP_PIN(1, 24), /* DU_DOTCLKOUT0 */ + [18] = RCAR_GP_PIN(1, 23), /* DU_DR7 */ + [19] = RCAR_GP_PIN(1, 22), /* DU_DR6 */ + [20] = RCAR_GP_PIN(1, 21), /* DU_DR5 */ + [21] = RCAR_GP_PIN(1, 20), /* DU_DR4 */ + [22] = RCAR_GP_PIN(1, 19), /* DU_DR3 */ + [23] = RCAR_GP_PIN(1, 18), /* DU_DR2 */ + [24] = RCAR_GP_PIN(1, 17), /* DU_DR1 */ + [25] = RCAR_GP_PIN(1, 16), /* DU_DR0 */ + [26] = RCAR_GP_PIN(1, 15), /* DU_DG7 */ + [27] = RCAR_GP_PIN(1, 14), /* DU_DG6 */ + [28] = RCAR_GP_PIN(1, 13), /* DU_DG5 */ + [29] = RCAR_GP_PIN(1, 12), /* DU_DG4 */ + [30] = RCAR_GP_PIN(1, 11), /* DU_DG3 */ + [31] = RCAR_GP_PIN(1, 10), /* DU_DG2 */ + } }, + { PINMUX_BIAS_REG("PUEN2", 0xe6060408, "PUD2", 0xe6060448) { + [ 0] = RCAR_GP_PIN(3, 8), /* NFDATA6 */ + [ 1] = RCAR_GP_PIN(3, 7), /* NFDATA5 */ + [ 2] = RCAR_GP_PIN(3, 6), /* NFDATA4 */ + [ 3] = RCAR_GP_PIN(3, 5), /* NFDATA3 */ + [ 4] = RCAR_GP_PIN(3, 4), /* NFDATA2 */ + [ 5] = RCAR_GP_PIN(3, 3), /* NFDATA1 */ + [ 6] = RCAR_GP_PIN(3, 2), /* NFDATA0 */ + [ 7] = RCAR_GP_PIN(3, 1), /* NFWE# (PUEN) / NFRE# (PUD) */ + [ 8] = RCAR_GP_PIN(3, 0), /* NFRE# (PUEN) / NFWE# (PUD) */ + [ 9] = RCAR_GP_PIN(4, 0), /* NFRB# */ + [10] = RCAR_GP_PIN(2, 31), /* NFCE# */ + [11] = RCAR_GP_PIN(2, 30), /* NFCLE */ + [12] = RCAR_GP_PIN(2, 29), /* NFALE */ + [13] = RCAR_GP_PIN(2, 28), /* VI4_CLKENB */ + [14] = RCAR_GP_PIN(2, 27), /* VI4_FIELD */ + [15] = RCAR_GP_PIN(2, 26), /* VI4_HSYNC# */ + [16] = RCAR_GP_PIN(2, 25), /* VI4_VSYNC# */ + [17] = RCAR_GP_PIN(2, 24), /* VI4_DATA23 */ + [18] = RCAR_GP_PIN(2, 23), /* VI4_DATA22 */ + [19] = RCAR_GP_PIN(2, 22), /* VI4_DATA21 */ + [20] = RCAR_GP_PIN(2, 21), /* VI4_DATA20 */ + [21] = RCAR_GP_PIN(2, 20), /* VI4_DATA19 */ + [22] = RCAR_GP_PIN(2, 19), /* VI4_DATA18 */ + [23] = RCAR_GP_PIN(2, 18), /* VI4_DATA17 */ + [24] = RCAR_GP_PIN(2, 17), /* VI4_DATA16 */ + [25] = RCAR_GP_PIN(2, 16), /* VI4_DATA15 */ + [26] = RCAR_GP_PIN(2, 15), /* VI4_DATA14 */ + [27] = RCAR_GP_PIN(2, 14), /* VI4_DATA13 */ + [28] = RCAR_GP_PIN(2, 13), /* VI4_DATA12 */ + [29] = RCAR_GP_PIN(2, 12), /* VI4_DATA11 */ + [30] = RCAR_GP_PIN(2, 11), /* VI4_DATA10 */ + [31] = RCAR_GP_PIN(2, 10), /* VI4_DATA9 */ + } }, + { PINMUX_BIAS_REG("PUEN3", 0xe606040c, "PUD3", 0xe606044c) { + [ 0] = RCAR_GP_PIN(4, 31), /* CAN0_RX_A */ + [ 1] = RCAR_GP_PIN(5, 2), /* CAN_CLK */ + [ 2] = RCAR_GP_PIN(5, 1), /* TPU0TO1_A */ + [ 3] = RCAR_GP_PIN(5, 0), /* TPU0TO0_A */ + [ 4] = RCAR_GP_PIN(4, 27), /* TX2 */ + [ 5] = RCAR_GP_PIN(4, 26), /* RX2 */ + [ 6] = RCAR_GP_PIN(4, 25), /* SCK2 */ + [ 7] = RCAR_GP_PIN(4, 24), /* TX1_A */ + [ 8] = RCAR_GP_PIN(4, 23), /* RX1_A */ + [ 9] = RCAR_GP_PIN(4, 22), /* SCK1_A */ + [10] = RCAR_GP_PIN(4, 21), /* TX0_A */ + [11] = RCAR_GP_PIN(4, 20), /* RX0_A */ + [12] = RCAR_GP_PIN(4, 19), /* SCK0_A */ + [13] = RCAR_GP_PIN(4, 18), /* MSIOF1_RXD */ + [14] = RCAR_GP_PIN(4, 17), /* MSIOF1_TXD */ + [15] = RCAR_GP_PIN(4, 16), /* MSIOF1_SCK */ + [16] = RCAR_GP_PIN(4, 15), /* MSIOF0_RXD */ + [17] = RCAR_GP_PIN(4, 14), /* MSIOF0_TXD */ + [18] = RCAR_GP_PIN(4, 13), /* MSIOF0_SYNC */ + [19] = RCAR_GP_PIN(4, 12), /* MSIOF0_SCK */ + [20] = RCAR_GP_PIN(4, 11), /* SDA1 */ + [21] = RCAR_GP_PIN(4, 10), /* SCL1 */ + [22] = RCAR_GP_PIN(4, 9), /* SDA0 */ + [23] = RCAR_GP_PIN(4, 8), /* SCL0 */ + [24] = RCAR_GP_PIN(4, 7), /* SSI_WS4_A */ + [25] = RCAR_GP_PIN(4, 6), /* SSI_SDATA4_A */ + [26] = RCAR_GP_PIN(4, 5), /* SSI_SCK4_A */ + [27] = RCAR_GP_PIN(4, 4), /* SSI_WS34 */ + [28] = RCAR_GP_PIN(4, 3), /* SSI_SDATA3 */ + [29] = RCAR_GP_PIN(4, 2), /* SSI_SCK34 */ + [30] = RCAR_GP_PIN(4, 1), /* AUDIO_CLKA */ + [31] = RCAR_GP_PIN(3, 9), /* NFDATA7 */ + } }, + { PINMUX_BIAS_REG("PUEN4", 0xe6060410, "PUD4", 0xe6060450) { + [ 0] = RCAR_GP_PIN(6, 10), /* QSPI1_IO3 */ + [ 1] = RCAR_GP_PIN(6, 9), /* QSPI1_IO2 */ + [ 2] = RCAR_GP_PIN(6, 8), /* QSPI1_MISO_IO1 */ + [ 3] = RCAR_GP_PIN(6, 7), /* QSPI1_MOSI_IO0 */ + [ 4] = RCAR_GP_PIN(6, 6), /* QSPI1_SPCLK */ + [ 5] = RCAR_GP_PIN(6, 5), /* QSPI0_SSL */ + [ 6] = RCAR_GP_PIN(6, 4), /* QSPI0_IO3 */ + [ 7] = RCAR_GP_PIN(6, 3), /* QSPI0_IO2 */ + [ 8] = RCAR_GP_PIN(6, 2), /* QSPI0_MISO_IO1 */ + [ 9] = RCAR_GP_PIN(6, 1), /* QSPI0_MOSI_IO0 */ + [10] = RCAR_GP_PIN(6, 0), /* QSPI0_SPCLK */ + [11] = RCAR_GP_PIN(5, 20), /* AVB0_LINK */ + [12] = RCAR_GP_PIN(5, 19), /* AVB0_PHY_INT */ + [13] = RCAR_GP_PIN(5, 18), /* AVB0_MAGIC */ + [14] = RCAR_GP_PIN(5, 17), /* AVB0_MDC */ + [15] = RCAR_GP_PIN(5, 16), /* AVB0_MDIO */ + [16] = RCAR_GP_PIN(5, 15), /* AVB0_TXCREFCLK */ + [17] = RCAR_GP_PIN(5, 14), /* AVB0_TD3 */ + [18] = RCAR_GP_PIN(5, 13), /* AVB0_TD2 */ + [19] = RCAR_GP_PIN(5, 12), /* AVB0_TD1 */ + [20] = RCAR_GP_PIN(5, 11), /* AVB0_TD0 */ + [21] = RCAR_GP_PIN(5, 10), /* AVB0_TXC */ + [22] = RCAR_GP_PIN(5, 9), /* AVB0_TX_CTL */ + [23] = RCAR_GP_PIN(5, 8), /* AVB0_RD3 */ + [24] = RCAR_GP_PIN(5, 7), /* AVB0_RD2 */ + [25] = RCAR_GP_PIN(5, 6), /* AVB0_RD1 */ + [26] = RCAR_GP_PIN(5, 5), /* AVB0_RD0 */ + [27] = RCAR_GP_PIN(5, 4), /* AVB0_RXC */ + [28] = RCAR_GP_PIN(5, 3), /* AVB0_RX_CTL */ + [29] = RCAR_GP_PIN(4, 30), /* CAN1_TX_A */ + [30] = RCAR_GP_PIN(4, 29), /* CAN1_RX_A */ + [31] = RCAR_GP_PIN(4, 28), /* CAN0_TX_A */ + } }, + { PINMUX_BIAS_REG("PUEN5", 0xe6060414, "PUD4", 0xe6060454) { + [ 0] = SH_PFC_PIN_NONE, + [ 1] = SH_PFC_PIN_NONE, + [ 2] = SH_PFC_PIN_NONE, + [ 3] = SH_PFC_PIN_NONE, + [ 4] = SH_PFC_PIN_NONE, + [ 5] = SH_PFC_PIN_NONE, + [ 6] = SH_PFC_PIN_NONE, + [ 7] = SH_PFC_PIN_NONE, + [ 8] = SH_PFC_PIN_NONE, + [ 9] = SH_PFC_PIN_NONE, + [10] = SH_PFC_PIN_NONE, + [11] = SH_PFC_PIN_NONE, + [12] = SH_PFC_PIN_NONE, + [13] = SH_PFC_PIN_NONE, + [14] = SH_PFC_PIN_NONE, + [15] = SH_PFC_PIN_NONE, + [16] = SH_PFC_PIN_NONE, + [17] = SH_PFC_PIN_NONE, + [18] = SH_PFC_PIN_NONE, + [19] = SH_PFC_PIN_NONE, + [20] = SH_PFC_PIN_NONE, + [21] = SH_PFC_PIN_NONE, + [22] = SH_PFC_PIN_NONE, + [23] = SH_PFC_PIN_NONE, + [24] = SH_PFC_PIN_NONE, + [25] = SH_PFC_PIN_NONE, + [26] = SH_PFC_PIN_NONE, + [27] = SH_PFC_PIN_NONE, + [28] = SH_PFC_PIN_NONE, + [29] = RCAR_GP_PIN(6, 13), /* RPC_INT# */ + [30] = RCAR_GP_PIN(6, 12), /* RPC_RESET# */ + [31] = RCAR_GP_PIN(6, 11), /* QSPI1_SSL */ + } }, + { /* sentinel */ } +}; + enum ioctrl_regs { TDSELCTRL, }; @@ -2843,8 +3071,83 @@ static const struct pinmux_ioctrl_reg pinmux_ioctrl_regs[] = { { /* sentinel */ }, }; +static const struct pinmux_bias_reg * +r8a77995_pin_to_bias_reg(const struct sh_pfc *pfc, unsigned int pin, + unsigned int *puen_bit, unsigned int *pud_bit) +{ + const struct pinmux_bias_reg *reg; + unsigned int bit; + + reg = rcar_pin_to_bias_reg(pfc, pin, &bit); + if (!reg) + return reg; + + *puen_bit = bit; + + /* NFWE# and NFRE# use different bit positions in PUD2 */ + switch (pin) { + case RCAR_GP_PIN(3, 0): /* NFRE# */ + *pud_bit = 7; + break; + + case RCAR_GP_PIN(3, 1): /* NFWE# */ + *pud_bit = 8; + break; + + default: + *pud_bit = bit; + break; + } + + return reg; +} + +static unsigned int r8a77995_pinmux_get_bias(struct sh_pfc *pfc, + unsigned int pin) +{ + const struct pinmux_bias_reg *reg; + unsigned int puen_bit, pud_bit; + + reg = r8a77995_pin_to_bias_reg(pfc, pin, &puen_bit, &pud_bit); + if (!reg) + return PIN_CONFIG_BIAS_DISABLE; + + if (!(sh_pfc_read(pfc, reg->puen) & BIT(puen_bit))) + return PIN_CONFIG_BIAS_DISABLE; + else if (sh_pfc_read(pfc, reg->pud) & BIT(pud_bit)) + return PIN_CONFIG_BIAS_PULL_UP; + else + return PIN_CONFIG_BIAS_PULL_DOWN; +} + +static void r8a77995_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, + unsigned int bias) +{ + const struct pinmux_bias_reg *reg; + unsigned int puen_bit, pud_bit; + u32 enable, updown; + + reg = r8a77995_pin_to_bias_reg(pfc, pin, &puen_bit, &pud_bit); + if (!reg) + return; + + enable = sh_pfc_read(pfc, reg->puen) & ~BIT(puen_bit); + if (bias != PIN_CONFIG_BIAS_DISABLE) { + enable |= BIT(puen_bit); + + updown = sh_pfc_read(pfc, reg->pud) & ~BIT(pud_bit); + if (bias == PIN_CONFIG_BIAS_PULL_UP) + updown |= BIT(pud_bit); + + sh_pfc_write(pfc, reg->pud, updown); + } + sh_pfc_write(pfc, reg->puen, enable); +} + static const struct sh_pfc_soc_operations r8a77995_pinmux_ops = { .pin_to_pocctrl = r8a77995_pin_to_pocctrl, + .get_bias = r8a77995_pinmux_get_bias, + .set_bias = r8a77995_pinmux_set_bias, }; const struct sh_pfc_soc_info r8a77995_pinmux_info = { @@ -2862,6 +3165,7 @@ const struct sh_pfc_soc_info r8a77995_pinmux_info = { .nr_functions = ARRAY_SIZE(pinmux_functions), .cfg_regs = pinmux_config_regs, + .bias_regs = pinmux_bias_regs, .ioctrl_regs = pinmux_ioctrl_regs, .pinmux_data = pinmux_data, diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c new file mode 100644 index 000000000000..dbf2f521bb27 --- /dev/null +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -0,0 +1,1175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2L Pin Control and GPIO driver core + * + * Copyright (C) 2021 Renesas Electronics Corporation. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/spinlock.h> + +#include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + +#include "../core.h" +#include "../pinconf.h" +#include "../pinmux.h" + +#define DRV_NAME "pinctrl-rzg2l" + +/* + * Use 16 lower bits [15:0] for pin identifier + * Use 16 higher bits [31:16] for pin mux function + */ +#define MUX_PIN_ID_MASK GENMASK(15, 0) +#define MUX_FUNC_MASK GENMASK(31, 16) +#define MUX_FUNC_OFFS 16 +#define MUX_FUNC(pinconf) (((pinconf) & MUX_FUNC_MASK) >> MUX_FUNC_OFFS) + +/* PIN capabilities */ +#define PIN_CFG_IOLH BIT(0) +#define PIN_CFG_SR BIT(1) +#define PIN_CFG_IEN BIT(2) +#define PIN_CFG_PUPD BIT(3) +#define PIN_CFG_IOLH_SD0 BIT(4) +#define PIN_CFG_IOLH_SD1 BIT(5) +#define PIN_CFG_IOLH_QSPI BIT(6) +#define PIN_CFG_IOLH_ETH0 BIT(7) +#define PIN_CFG_IOLH_ETH1 BIT(8) +#define PIN_CFG_FILONOFF BIT(9) +#define PIN_CFG_FILNUM BIT(10) +#define PIN_CFG_FILCLKSEL BIT(11) + +#define RZG2L_MPXED_PIN_FUNCS (PIN_CFG_IOLH | \ + PIN_CFG_SR | \ + PIN_CFG_PUPD | \ + PIN_CFG_FILONOFF | \ + PIN_CFG_FILNUM | \ + PIN_CFG_FILCLKSEL) + +#define RZG2L_MPXED_ETH_PIN_FUNCS(x) ((x) | \ + PIN_CFG_FILONOFF | \ + PIN_CFG_FILNUM | \ + PIN_CFG_FILCLKSEL) + +/* + * n indicates number of pins in the port, a is the register index + * and f is pin configuration capabilities supported. + */ +#define RZG2L_GPIO_PORT_PACK(n, a, f) (((n) << 28) | ((a) << 20) | (f)) +#define RZG2L_GPIO_PORT_GET_PINCNT(x) (((x) & GENMASK(30, 28)) >> 28) +#define RZG2L_GPIO_PORT_GET_INDEX(x) (((x) & GENMASK(26, 20)) >> 20) +#define RZG2L_GPIO_PORT_GET_CFGS(x) ((x) & GENMASK(19, 0)) + +/* + * BIT(31) indicates dedicated pin, p is the register index while + * referencing to SR/IEN/IOLH/FILxx registers, b is the register bits + * (b * 8) and f is the pin configuration capabilities supported. + */ +#define RZG2L_SINGLE_PIN BIT(31) +#define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \ + ((p) << 24) | ((b) << 20) | (f)) +#define RZG2L_SINGLE_PIN_GET_PORT(x) (((x) & GENMASK(30, 24)) >> 24) +#define RZG2L_SINGLE_PIN_GET_BIT(x) (((x) & GENMASK(22, 20)) >> 20) +#define RZG2L_SINGLE_PIN_GET_CFGS(x) ((x) & GENMASK(19, 0)) + +#define P(n) (0x0000 + 0x10 + (n)) +#define PM(n) (0x0100 + 0x20 + (n) * 2) +#define PMC(n) (0x0200 + 0x10 + (n)) +#define PFC(n) (0x0400 + 0x40 + (n) * 4) +#define PIN(n) (0x0800 + 0x10 + (n)) +#define IEN(n) (0x1800 + (n) * 8) +#define PWPR (0x3014) +#define SD_CH(n) (0x3000 + (n) * 4) +#define QSPI (0x3008) + +#define PVDD_1800 1 /* I/O domain voltage <= 1.8V */ +#define PVDD_3300 0 /* I/O domain voltage >= 3.3V */ + +#define PWPR_B0WI BIT(7) /* Bit Write Disable */ +#define PWPR_PFCWE BIT(6) /* PFC Register Write Enable */ + +#define PM_MASK 0x03 +#define PVDD_MASK 0x01 +#define PFC_MASK 0x07 +#define IEN_MASK 0x01 + +#define PM_INPUT 0x1 +#define PM_OUTPUT 0x2 + +#define RZG2L_PIN_ID_TO_PORT(id) ((id) / RZG2L_PINS_PER_PORT) +#define RZG2L_PIN_ID_TO_PIN(id) ((id) % RZG2L_PINS_PER_PORT) + +struct rzg2l_dedicated_configs { + const char *name; + u32 config; +}; + +struct rzg2l_pinctrl_data { + const char * const *port_pins; + const u32 *port_pin_configs; + struct rzg2l_dedicated_configs *dedicated_pins; + unsigned int n_port_pins; + unsigned int n_dedicated_pins; +}; + +struct rzg2l_pinctrl { + struct pinctrl_dev *pctl; + struct pinctrl_desc desc; + struct pinctrl_pin_desc *pins; + + const struct rzg2l_pinctrl_data *data; + void __iomem *base; + struct device *dev; + struct clk *clk; + + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; + + spinlock_t lock; +}; + +static void rzg2l_pinctrl_set_pfc_mode(struct rzg2l_pinctrl *pctrl, + u8 port, u8 pin, u8 func) +{ + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&pctrl->lock, flags); + + /* Set pin to 'Non-use (Hi-Z input protection)' */ + reg = readw(pctrl->base + PM(port)); + reg &= ~(PM_MASK << (pin * 2)); + writew(reg, pctrl->base + PM(port)); + + /* Temporarily switch to GPIO mode with PMC register */ + reg = readb(pctrl->base + PMC(port)); + writeb(reg & ~BIT(pin), pctrl->base + PMC(port)); + + /* Set the PWPR register to allow PFC register to write */ + writel(0x0, pctrl->base + PWPR); /* B0WI=0, PFCWE=0 */ + writel(PWPR_PFCWE, pctrl->base + PWPR); /* B0WI=0, PFCWE=1 */ + + /* Select Pin function mode with PFC register */ + reg = readl(pctrl->base + PFC(port)); + reg &= ~(PFC_MASK << (pin * 4)); + writel(reg | (func << (pin * 4)), pctrl->base + PFC(port)); + + /* Set the PWPR register to be write-protected */ + writel(0x0, pctrl->base + PWPR); /* B0WI=0, PFCWE=0 */ + writel(PWPR_B0WI, pctrl->base + PWPR); /* B0WI=1, PFCWE=0 */ + + /* Switch to Peripheral pin function with PMC register */ + reg = readb(pctrl->base + PMC(port)); + writeb(reg | BIT(pin), pctrl->base + PMC(port)); + + spin_unlock_irqrestore(&pctrl->lock, flags); +}; + +static int rzg2l_pinctrl_set_mux(struct pinctrl_dev *pctldev, + unsigned int func_selector, + unsigned int group_selector) +{ + struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct function_desc *func; + unsigned int i, *psel_val; + struct group_desc *group; + int *pins; + + func = pinmux_generic_get_function(pctldev, func_selector); + if (!func) + return -EINVAL; + group = pinctrl_generic_get_group(pctldev, group_selector); + if (!group) + return -EINVAL; + + psel_val = func->data; + pins = group->pins; + + for (i = 0; i < group->num_pins; i++) { + dev_dbg(pctrl->dev, "port:%u pin: %u PSEL:%u\n", + RZG2L_PIN_ID_TO_PORT(pins[i]), RZG2L_PIN_ID_TO_PIN(pins[i]), + psel_val[i]); + rzg2l_pinctrl_set_pfc_mode(pctrl, RZG2L_PIN_ID_TO_PORT(pins[i]), + RZG2L_PIN_ID_TO_PIN(pins[i]), psel_val[i]); + } + + return 0; +}; + +static int rzg2l_map_add_config(struct pinctrl_map *map, + const char *group_or_pin, + enum pinctrl_map_type type, + unsigned long *configs, + unsigned int num_configs) +{ + unsigned long *cfgs; + + cfgs = kmemdup(configs, num_configs * sizeof(*cfgs), + GFP_KERNEL); + if (!cfgs) + return -ENOMEM; + + map->type = type; + map->data.configs.group_or_pin = group_or_pin; + map->data.configs.configs = cfgs; + map->data.configs.num_configs = num_configs; + + return 0; +} + +static int rzg2l_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps, + unsigned int *index) +{ + struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct pinctrl_map *maps = *map; + unsigned int nmaps = *num_maps; + unsigned long *configs = NULL; + unsigned int *pins, *psel_val; + unsigned int num_pinmux = 0; + unsigned int idx = *index; + unsigned int num_pins, i; + unsigned int num_configs; + struct property *pinmux; + struct property *prop; + int ret, gsel, fsel; + const char **pin_fn; + const char *pin; + + pinmux = of_find_property(np, "pinmux", NULL); + if (pinmux) + num_pinmux = pinmux->length / sizeof(u32); + + ret = of_property_count_strings(np, "pins"); + if (ret == -EINVAL) { + num_pins = 0; + } else if (ret < 0) { + dev_err(pctrl->dev, "Invalid pins list in DT\n"); + return ret; + } else { + num_pins = ret; + } + + if (!num_pinmux && !num_pins) + return 0; + + if (num_pinmux && num_pins) { + dev_err(pctrl->dev, + "DT node must contain either a pinmux or pins and not both\n"); + return -EINVAL; + } + + ret = pinconf_generic_parse_dt_config(np, NULL, &configs, &num_configs); + if (ret < 0) + return ret; + + if (num_pins && !num_configs) { + dev_err(pctrl->dev, "DT node must contain a config\n"); + ret = -ENODEV; + goto done; + } + + if (num_pinmux) + nmaps += 1; + + if (num_pins) + nmaps += num_pins; + + maps = krealloc_array(maps, nmaps, sizeof(*maps), GFP_KERNEL); + if (!maps) { + ret = -ENOMEM; + goto done; + } + + *map = maps; + *num_maps = nmaps; + if (num_pins) { + of_property_for_each_string(np, "pins", prop, pin) { + ret = rzg2l_map_add_config(&maps[idx], pin, + PIN_MAP_TYPE_CONFIGS_PIN, + configs, num_configs); + if (ret < 0) + goto done; + + idx++; + } + ret = 0; + goto done; + } + + pins = devm_kcalloc(pctrl->dev, num_pinmux, sizeof(*pins), GFP_KERNEL); + psel_val = devm_kcalloc(pctrl->dev, num_pinmux, sizeof(*psel_val), + GFP_KERNEL); + pin_fn = devm_kzalloc(pctrl->dev, sizeof(*pin_fn), GFP_KERNEL); + if (!pins || !psel_val || !pin_fn) { + ret = -ENOMEM; + goto done; + } + + /* Collect pin locations and mux settings from DT properties */ + for (i = 0; i < num_pinmux; ++i) { + u32 value; + + ret = of_property_read_u32_index(np, "pinmux", i, &value); + if (ret) + goto done; + pins[i] = value & MUX_PIN_ID_MASK; + psel_val[i] = MUX_FUNC(value); + } + + /* Register a single pin group listing all the pins we read from DT */ + gsel = pinctrl_generic_add_group(pctldev, np->name, pins, num_pinmux, NULL); + if (gsel < 0) { + ret = gsel; + goto done; + } + + /* + * Register a single group function where the 'data' is an array PSEL + * register values read from DT. + */ + pin_fn[0] = np->name; + fsel = pinmux_generic_add_function(pctldev, np->name, pin_fn, 1, + psel_val); + if (fsel < 0) { + ret = fsel; + goto remove_group; + } + + maps[idx].type = PIN_MAP_TYPE_MUX_GROUP; + maps[idx].data.mux.group = np->name; + maps[idx].data.mux.function = np->name; + idx++; + + dev_dbg(pctrl->dev, "Parsed %pOF with %d pins\n", np, num_pinmux); + ret = 0; + goto done; + +remove_group: + pinctrl_generic_remove_group(pctldev, gsel); +done: + *index = idx; + kfree(configs); + return ret; +} + +static void rzg2l_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned int num_maps) +{ + unsigned int i; + + if (!map) + return; + + for (i = 0; i < num_maps; ++i) { + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP || + map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + } + kfree(map); +} + +static int rzg2l_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned int *num_maps) +{ + struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + struct device_node *child; + unsigned int index; + int ret; + + *map = NULL; + *num_maps = 0; + index = 0; + + for_each_child_of_node(np, child) { + ret = rzg2l_dt_subnode_to_map(pctldev, child, map, + num_maps, &index); + if (ret < 0) { + of_node_put(child); + goto done; + } + } + + if (*num_maps == 0) { + ret = rzg2l_dt_subnode_to_map(pctldev, np, map, + num_maps, &index); + if (ret < 0) + goto done; + } + + if (*num_maps) + return 0; + + dev_err(pctrl->dev, "no mapping found in node %pOF\n", np); + ret = -EINVAL; + +done: + if (ret < 0) + rzg2l_dt_free_map(pctldev, *map, *num_maps); + + return ret; +} + +static int rzg2l_pinctrl_pinconf_get(struct pinctrl_dev *pctldev, + unsigned int _pin, + unsigned long *config) +{ + struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + enum pin_config_param param = pinconf_to_config_param(*config); + const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin]; + unsigned int *pin_data = pin->drv_data; + unsigned int arg = 0; + unsigned long flags; + void __iomem *addr; + u32 port = 0, reg; + u32 cfg = 0; + u8 bit = 0; + + if (!pin_data) + return -EINVAL; + + if (*pin_data & RZG2L_SINGLE_PIN) { + port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data); + cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data); + bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data); + } + + switch (param) { + case PIN_CONFIG_INPUT_ENABLE: + if (!(cfg & PIN_CFG_IEN)) + return -EINVAL; + spin_lock_irqsave(&pctrl->lock, flags); + /* handle _L/_H for 32-bit register read/write */ + addr = pctrl->base + IEN(port); + if (bit >= 4) { + bit -= 4; + addr += 4; + } + + reg = readl(addr) & (IEN_MASK << (bit * 8)); + arg = (reg >> (bit * 8)) & 0x1; + spin_unlock_irqrestore(&pctrl->lock, flags); + break; + + case PIN_CONFIG_POWER_SOURCE: { + u32 pwr_reg = 0x0; + + if (cfg & PIN_CFG_IOLH_SD0) + pwr_reg = SD_CH(0); + else if (cfg & PIN_CFG_IOLH_SD1) + pwr_reg = SD_CH(1); + else if (cfg & PIN_CFG_IOLH_QSPI) + pwr_reg = QSPI; + else + return -EINVAL; + + spin_lock_irqsave(&pctrl->lock, flags); + addr = pctrl->base + pwr_reg; + arg = (readl(addr) & PVDD_MASK) ? 1800 : 3300; + spin_unlock_irqrestore(&pctrl->lock, flags); + break; + } + + default: + return -ENOTSUPP; + } + + *config = pinconf_to_config_packed(param, arg); + + return 0; +}; + +static int rzg2l_pinctrl_pinconf_set(struct pinctrl_dev *pctldev, + unsigned int _pin, + unsigned long *_configs, + unsigned int num_configs) +{ + struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[_pin]; + unsigned int *pin_data = pin->drv_data; + enum pin_config_param param; + unsigned long flags; + void __iomem *addr; + u32 port = 0, reg; + unsigned int i; + u32 cfg = 0; + u8 bit = 0; + + if (!pin_data) + return -EINVAL; + + if (*pin_data & RZG2L_SINGLE_PIN) { + port = RZG2L_SINGLE_PIN_GET_PORT(*pin_data); + cfg = RZG2L_SINGLE_PIN_GET_CFGS(*pin_data); + bit = RZG2L_SINGLE_PIN_GET_BIT(*pin_data); + } + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(_configs[i]); + switch (param) { + case PIN_CONFIG_INPUT_ENABLE: { + unsigned int arg = + pinconf_to_config_argument(_configs[i]); + + if (!(cfg & PIN_CFG_IEN)) + return -EINVAL; + + /* handle _L/_H for 32-bit register read/write */ + addr = pctrl->base + IEN(port); + if (bit >= 4) { + bit -= 4; + addr += 4; + } + + spin_lock_irqsave(&pctrl->lock, flags); + reg = readl(addr) & ~(IEN_MASK << (bit * 8)); + writel(reg | (arg << (bit * 8)), addr); + spin_unlock_irqrestore(&pctrl->lock, flags); + break; + } + + case PIN_CONFIG_POWER_SOURCE: { + unsigned int mV = pinconf_to_config_argument(_configs[i]); + u32 pwr_reg = 0x0; + + if (mV != 1800 && mV != 3300) + return -EINVAL; + + if (cfg & PIN_CFG_IOLH_SD0) + pwr_reg = SD_CH(0); + else if (cfg & PIN_CFG_IOLH_SD1) + pwr_reg = SD_CH(1); + else if (cfg & PIN_CFG_IOLH_QSPI) + pwr_reg = QSPI; + else + return -EINVAL; + + addr = pctrl->base + pwr_reg; + spin_lock_irqsave(&pctrl->lock, flags); + writel((mV == 1800) ? PVDD_1800 : PVDD_3300, addr); + spin_unlock_irqrestore(&pctrl->lock, flags); + break; + } + default: + return -EOPNOTSUPP; + } + } + + return 0; +} + +static int rzg2l_pinctrl_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long *configs, + unsigned int num_configs) +{ + const unsigned int *pins; + unsigned int i, npins; + int ret; + + ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; i++) { + ret = rzg2l_pinctrl_pinconf_set(pctldev, pins[i], configs, + num_configs); + if (ret) + return ret; + } + + return 0; +}; + +static int rzg2l_pinctrl_pinconf_group_get(struct pinctrl_dev *pctldev, + unsigned int group, + unsigned long *config) +{ + const unsigned int *pins; + unsigned int i, npins, prev_config = 0; + int ret; + + ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins); + if (ret) + return ret; + + for (i = 0; i < npins; i++) { + ret = rzg2l_pinctrl_pinconf_get(pctldev, pins[i], config); + if (ret) + return ret; + + /* Check config matching between to pin */ + if (i && prev_config != *config) + return -EOPNOTSUPP; + + prev_config = *config; + } + + return 0; +}; + +static const struct pinctrl_ops rzg2l_pinctrl_pctlops = { + .get_groups_count = pinctrl_generic_get_group_count, + .get_group_name = pinctrl_generic_get_group_name, + .get_group_pins = pinctrl_generic_get_group_pins, + .dt_node_to_map = rzg2l_dt_node_to_map, + .dt_free_map = rzg2l_dt_free_map, +}; + +static const struct pinmux_ops rzg2l_pinctrl_pmxops = { + .get_functions_count = pinmux_generic_get_function_count, + .get_function_name = pinmux_generic_get_function_name, + .get_function_groups = pinmux_generic_get_function_groups, + .set_mux = rzg2l_pinctrl_set_mux, + .strict = true, +}; + +static const struct pinconf_ops rzg2l_pinctrl_confops = { + .is_generic = true, + .pin_config_get = rzg2l_pinctrl_pinconf_get, + .pin_config_set = rzg2l_pinctrl_pinconf_set, + .pin_config_group_set = rzg2l_pinctrl_pinconf_group_set, + .pin_config_group_get = rzg2l_pinctrl_pinconf_group_get, + .pin_config_config_dbg_show = pinconf_generic_dump_config, +}; + +static int rzg2l_gpio_request(struct gpio_chip *chip, unsigned int offset) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + unsigned long flags; + u8 reg8; + int ret; + + ret = pinctrl_gpio_request(chip->base + offset); + if (ret) + return ret; + + spin_lock_irqsave(&pctrl->lock, flags); + + /* Select GPIO mode in PMC Register */ + reg8 = readb(pctrl->base + PMC(port)); + reg8 &= ~BIT(bit); + writeb(reg8, pctrl->base + PMC(port)); + + spin_unlock_irqrestore(&pctrl->lock, flags); + + return 0; +} + +static void rzg2l_gpio_set_direction(struct rzg2l_pinctrl *pctrl, u32 port, + u8 bit, bool output) +{ + unsigned long flags; + u16 reg16; + + spin_lock_irqsave(&pctrl->lock, flags); + + reg16 = readw(pctrl->base + PM(port)); + reg16 &= ~(PM_MASK << (bit * 2)); + + reg16 |= (output ? PM_OUTPUT : PM_INPUT) << (bit * 2); + writew(reg16, pctrl->base + PM(port)); + + spin_unlock_irqrestore(&pctrl->lock, flags); +} + +static int rzg2l_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + + if (!(readb(pctrl->base + PMC(port)) & BIT(bit))) { + u16 reg16; + + reg16 = readw(pctrl->base + PM(port)); + reg16 = (reg16 >> (bit * 2)) & PM_MASK; + if (reg16 == PM_OUTPUT) + return GPIO_LINE_DIRECTION_OUT; + } + + return GPIO_LINE_DIRECTION_IN; +} + +static int rzg2l_gpio_direction_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + + rzg2l_gpio_set_direction(pctrl, port, bit, false); + + return 0; +} + +static void rzg2l_gpio_set(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + unsigned long flags; + u8 reg8; + + spin_lock_irqsave(&pctrl->lock, flags); + + reg8 = readb(pctrl->base + P(port)); + + if (value) + writeb(reg8 | BIT(bit), pctrl->base + P(port)); + else + writeb(reg8 & ~BIT(bit), pctrl->base + P(port)); + + spin_unlock_irqrestore(&pctrl->lock, flags); +} + +static int rzg2l_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + + rzg2l_gpio_set(chip, offset, value); + rzg2l_gpio_set_direction(pctrl, port, bit, true); + + return 0; +} + +static int rzg2l_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip); + u32 port = RZG2L_PIN_ID_TO_PORT(offset); + u8 bit = RZG2L_PIN_ID_TO_PIN(offset); + u16 reg16; + + reg16 = readw(pctrl->base + PM(port)); + reg16 = (reg16 >> (bit * 2)) & PM_MASK; + + if (reg16 == PM_INPUT) + return !!(readb(pctrl->base + PIN(port)) & BIT(bit)); + else if (reg16 == PM_OUTPUT) + return !!(readb(pctrl->base + P(port)) & BIT(bit)); + else + return -EINVAL; +} + +static void rzg2l_gpio_free(struct gpio_chip *chip, unsigned int offset) +{ + pinctrl_gpio_free(chip->base + offset); + + /* + * Set the GPIO as an input to ensure that the next GPIO request won't + * drive the GPIO pin as an output. + */ + rzg2l_gpio_direction_input(chip, offset); +} + +static const char * const rzg2l_gpio_names[] = { + "P0_0", "P0_1", "P0_2", "P0_3", "P0_4", "P0_5", "P0_6", "P0_7", + "P1_0", "P1_1", "P1_2", "P1_3", "P1_4", "P1_5", "P1_6", "P1_7", + "P2_0", "P2_1", "P2_2", "P2_3", "P2_4", "P2_5", "P2_6", "P2_7", + "P3_0", "P3_1", "P3_2", "P3_3", "P3_4", "P3_5", "P3_6", "P3_7", + "P4_0", "P4_1", "P4_2", "P4_3", "P4_4", "P4_5", "P4_6", "P4_7", + "P5_0", "P5_1", "P5_2", "P5_3", "P5_4", "P5_5", "P5_6", "P5_7", + "P6_0", "P6_1", "P6_2", "P6_3", "P6_4", "P6_5", "P6_6", "P6_7", + "P7_0", "P7_1", "P7_2", "P7_3", "P7_4", "P7_5", "P7_6", "P7_7", + "P8_0", "P8_1", "P8_2", "P8_3", "P8_4", "P8_5", "P8_6", "P8_7", + "P9_0", "P9_1", "P9_2", "P9_3", "P9_4", "P9_5", "P9_6", "P9_7", + "P10_0", "P10_1", "P10_2", "P10_3", "P10_4", "P10_5", "P10_6", "P10_7", + "P11_0", "P11_1", "P11_2", "P11_3", "P11_4", "P11_5", "P11_6", "P11_7", + "P12_0", "P12_1", "P12_2", "P12_3", "P12_4", "P12_5", "P12_6", "P12_7", + "P13_0", "P13_1", "P13_2", "P13_3", "P13_4", "P13_5", "P13_6", "P13_7", + "P14_0", "P14_1", "P14_2", "P14_3", "P14_4", "P14_5", "P14_6", "P14_7", + "P15_0", "P15_1", "P15_2", "P15_3", "P15_4", "P15_5", "P15_6", "P15_7", + "P16_0", "P16_1", "P16_2", "P16_3", "P16_4", "P16_5", "P16_6", "P16_7", + "P17_0", "P17_1", "P17_2", "P17_3", "P17_4", "P17_5", "P17_6", "P17_7", + "P18_0", "P18_1", "P18_2", "P18_3", "P18_4", "P18_5", "P18_6", "P18_7", + "P19_0", "P19_1", "P19_2", "P19_3", "P19_4", "P19_5", "P19_6", "P19_7", + "P20_0", "P20_1", "P20_2", "P20_3", "P20_4", "P20_5", "P20_6", "P20_7", + "P21_0", "P21_1", "P21_2", "P21_3", "P21_4", "P21_5", "P21_6", "P21_7", + "P22_0", "P22_1", "P22_2", "P22_3", "P22_4", "P22_5", "P22_6", "P22_7", + "P23_0", "P23_1", "P23_2", "P23_3", "P23_4", "P23_5", "P23_6", "P23_7", + "P24_0", "P24_1", "P24_2", "P24_3", "P24_4", "P24_5", "P24_6", "P24_7", + "P25_0", "P25_1", "P25_2", "P25_3", "P25_4", "P25_5", "P25_6", "P25_7", + "P26_0", "P26_1", "P26_2", "P26_3", "P26_4", "P26_5", "P26_6", "P26_7", + "P27_0", "P27_1", "P27_2", "P27_3", "P27_4", "P27_5", "P27_6", "P27_7", + "P28_0", "P28_1", "P28_2", "P28_3", "P28_4", "P28_5", "P28_6", "P28_7", + "P29_0", "P29_1", "P29_2", "P29_3", "P29_4", "P29_5", "P29_6", "P29_7", + "P30_0", "P30_1", "P30_2", "P30_3", "P30_4", "P30_5", "P30_6", "P30_7", + "P31_0", "P31_1", "P31_2", "P31_3", "P31_4", "P31_5", "P31_6", "P31_7", + "P32_0", "P32_1", "P32_2", "P32_3", "P32_4", "P32_5", "P32_6", "P32_7", + "P33_0", "P33_1", "P33_2", "P33_3", "P33_4", "P33_5", "P33_6", "P33_7", + "P34_0", "P34_1", "P34_2", "P34_3", "P34_4", "P34_5", "P34_6", "P34_7", + "P35_0", "P35_1", "P35_2", "P35_3", "P35_4", "P35_5", "P35_6", "P35_7", + "P36_0", "P36_1", "P36_2", "P36_3", "P36_4", "P36_5", "P36_6", "P36_7", + "P37_0", "P37_1", "P37_2", "P37_3", "P37_4", "P37_5", "P37_6", "P37_7", + "P38_0", "P38_1", "P38_2", "P38_3", "P38_4", "P38_5", "P38_6", "P38_7", + "P39_0", "P39_1", "P39_2", "P39_3", "P39_4", "P39_5", "P39_6", "P39_7", + "P40_0", "P40_1", "P40_2", "P40_3", "P40_4", "P40_5", "P40_6", "P40_7", + "P41_0", "P41_1", "P41_2", "P41_3", "P41_4", "P41_5", "P41_6", "P41_7", + "P42_0", "P42_1", "P42_2", "P42_3", "P42_4", "P42_5", "P42_6", "P42_7", + "P43_0", "P43_1", "P43_2", "P43_3", "P43_4", "P43_5", "P43_6", "P43_7", + "P44_0", "P44_1", "P44_2", "P44_3", "P44_4", "P44_5", "P44_6", "P44_7", + "P45_0", "P45_1", "P45_2", "P45_3", "P45_4", "P45_5", "P45_6", "P45_7", + "P46_0", "P46_1", "P46_2", "P46_3", "P46_4", "P46_5", "P46_6", "P46_7", + "P47_0", "P47_1", "P47_2", "P47_3", "P47_4", "P47_5", "P47_6", "P47_7", + "P48_0", "P48_1", "P48_2", "P48_3", "P48_4", "P48_5", "P48_6", "P48_7", +}; + +static const u32 rzg2l_gpio_configs[] = { + RZG2L_GPIO_PORT_PACK(2, 0x10, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x11, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x12, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x13, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x14, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x15, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x16, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x17, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x18, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x19, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x1a, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x1b, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x1c, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x1d, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x1e, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x1f, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x20, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x22, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x22, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x23, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x24, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x25, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x26, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x27, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x28, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x29, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x2a, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x2b, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x2c, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH0)), + RZG2L_GPIO_PORT_PACK(2, 0x2d, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x2e, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x2f, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x30, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x31, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x32, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x33, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x34, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(3, 0x35, RZG2L_MPXED_ETH_PIN_FUNCS(PIN_CFG_IOLH_ETH1)), + RZG2L_GPIO_PORT_PACK(2, 0x36, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x37, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(3, 0x38, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(2, 0x39, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(5, 0x3a, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(4, 0x3b, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(4, 0x3c, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(4, 0x3d, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(4, 0x3e, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(4, 0x3f, RZG2L_MPXED_PIN_FUNCS), + RZG2L_GPIO_PORT_PACK(5, 0x40, RZG2L_MPXED_PIN_FUNCS), +}; + +static struct rzg2l_dedicated_configs rzg2l_dedicated_pins[] = { + { "NMI", RZG2L_SINGLE_PIN_PACK(0x1, 0, + (PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL)) }, + { "TMS/SWDIO", RZG2L_SINGLE_PIN_PACK(0x2, 0, + (PIN_CFG_SR | PIN_CFG_IOLH | PIN_CFG_IEN)) }, + { "TDO", RZG2L_SINGLE_PIN_PACK(0x3, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN)) }, + { "AUDIO_CLK1", RZG2L_SINGLE_PIN_PACK(0x4, 0, PIN_CFG_IEN) }, + { "AUDIO_CLK2", RZG2L_SINGLE_PIN_PACK(0x4, 1, PIN_CFG_IEN) }, + { "SD0_CLK", RZG2L_SINGLE_PIN_PACK(0x6, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD0)) }, + { "SD0_CMD", RZG2L_SINGLE_PIN_PACK(0x6, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_RST#", RZG2L_SINGLE_PIN_PACK(0x6, 2, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA0", RZG2L_SINGLE_PIN_PACK(0x7, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA1", RZG2L_SINGLE_PIN_PACK(0x7, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA2", RZG2L_SINGLE_PIN_PACK(0x7, 2, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA3", RZG2L_SINGLE_PIN_PACK(0x7, 3, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA4", RZG2L_SINGLE_PIN_PACK(0x7, 4, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA5", RZG2L_SINGLE_PIN_PACK(0x7, 5, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA6", RZG2L_SINGLE_PIN_PACK(0x7, 6, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD0_DATA7", RZG2L_SINGLE_PIN_PACK(0x7, 7, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD0)) }, + { "SD1_CLK", RZG2L_SINGLE_PIN_PACK(0x8, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_SD1))}, + { "SD1_CMD", RZG2L_SINGLE_PIN_PACK(0x8, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) }, + { "SD1_DATA0", RZG2L_SINGLE_PIN_PACK(0x9, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) }, + { "SD1_DATA1", RZG2L_SINGLE_PIN_PACK(0x9, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) }, + { "SD1_DATA2", RZG2L_SINGLE_PIN_PACK(0x9, 2, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) }, + { "SD1_DATA3", RZG2L_SINGLE_PIN_PACK(0x9, 3, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IEN | PIN_CFG_IOLH_SD1)) }, + { "QSPI0_SPCLK", RZG2L_SINGLE_PIN_PACK(0xa, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI0_IO0", RZG2L_SINGLE_PIN_PACK(0xa, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI0_IO1", RZG2L_SINGLE_PIN_PACK(0xa, 2, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI0_IO2", RZG2L_SINGLE_PIN_PACK(0xa, 3, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI0_IO3", RZG2L_SINGLE_PIN_PACK(0xa, 4, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI0_SSL", RZG2L_SINGLE_PIN_PACK(0xa, 5, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_SPCLK", RZG2L_SINGLE_PIN_PACK(0xb, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_IO0", RZG2L_SINGLE_PIN_PACK(0xb, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_IO1", RZG2L_SINGLE_PIN_PACK(0xb, 2, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_IO2", RZG2L_SINGLE_PIN_PACK(0xb, 3, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_IO3", RZG2L_SINGLE_PIN_PACK(0xb, 4, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI1_SSL", RZG2L_SINGLE_PIN_PACK(0xb, 5, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI_RESET#", RZG2L_SINGLE_PIN_PACK(0xc, 0, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI_WP#", RZG2L_SINGLE_PIN_PACK(0xc, 1, + (PIN_CFG_IOLH | PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "QSPI_INT#", RZG2L_SINGLE_PIN_PACK(0xc, 2, (PIN_CFG_SR | PIN_CFG_IOLH_QSPI)) }, + { "WDTOVF_PERROUT#", RZG2L_SINGLE_PIN_PACK(0xd, 0, (PIN_CFG_IOLH | PIN_CFG_SR)) }, + { "RIIC0_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 0, PIN_CFG_IEN) }, + { "RIIC0_SCL", RZG2L_SINGLE_PIN_PACK(0xe, 1, PIN_CFG_IEN) }, + { "RIIC1_SDA", RZG2L_SINGLE_PIN_PACK(0xe, 2, PIN_CFG_IEN) }, + { "RIIC1_SCL", RZG2L_SINGLE_PIN_PACK(0xe, 3, PIN_CFG_IEN) }, +}; + +static int rzg2l_gpio_register(struct rzg2l_pinctrl *pctrl) +{ + struct device_node *np = pctrl->dev->of_node; + struct gpio_chip *chip = &pctrl->gpio_chip; + const char *name = dev_name(pctrl->dev); + struct of_phandle_args of_args; + int ret; + + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &of_args); + if (ret) { + dev_err(pctrl->dev, "Unable to parse gpio-ranges\n"); + return ret; + } + + if (of_args.args[0] != 0 || of_args.args[1] != 0 || + of_args.args[2] != ARRAY_SIZE(rzg2l_gpio_names)) { + dev_err(pctrl->dev, "gpio-ranges does not match selected SOC\n"); + return -EINVAL; + } + + chip->names = rzg2l_gpio_names; + chip->request = rzg2l_gpio_request; + chip->free = rzg2l_gpio_free; + chip->get_direction = rzg2l_gpio_get_direction; + chip->direction_input = rzg2l_gpio_direction_input; + chip->direction_output = rzg2l_gpio_direction_output; + chip->get = rzg2l_gpio_get; + chip->set = rzg2l_gpio_set; + chip->label = name; + chip->parent = pctrl->dev; + chip->owner = THIS_MODULE; + chip->base = -1; + chip->ngpio = of_args.args[2]; + + pctrl->gpio_range.id = 0; + pctrl->gpio_range.pin_base = 0; + pctrl->gpio_range.base = 0; + pctrl->gpio_range.npins = chip->ngpio; + pctrl->gpio_range.name = chip->label; + pctrl->gpio_range.gc = chip; + ret = devm_gpiochip_add_data(pctrl->dev, chip, pctrl); + if (ret) { + dev_err(pctrl->dev, "failed to add GPIO controller\n"); + return ret; + } + + dev_dbg(pctrl->dev, "Registered gpio controller\n"); + + return 0; +} + +static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl) +{ + struct pinctrl_pin_desc *pins; + unsigned int i, j; + u32 *pin_data; + int ret; + + pctrl->desc.name = DRV_NAME; + pctrl->desc.npins = pctrl->data->n_port_pins + pctrl->data->n_dedicated_pins; + pctrl->desc.pctlops = &rzg2l_pinctrl_pctlops; + pctrl->desc.pmxops = &rzg2l_pinctrl_pmxops; + pctrl->desc.confops = &rzg2l_pinctrl_confops; + pctrl->desc.owner = THIS_MODULE; + + pins = devm_kcalloc(pctrl->dev, pctrl->desc.npins, sizeof(*pins), GFP_KERNEL); + if (!pins) + return -ENOMEM; + + pin_data = devm_kcalloc(pctrl->dev, pctrl->desc.npins, + sizeof(*pin_data), GFP_KERNEL); + if (!pin_data) + return -ENOMEM; + + pctrl->pins = pins; + pctrl->desc.pins = pins; + + for (i = 0, j = 0; i < pctrl->data->n_port_pins; i++) { + pins[i].number = i; + pins[i].name = pctrl->data->port_pins[i]; + if (i && !(i % RZG2L_PINS_PER_PORT)) + j++; + pin_data[i] = pctrl->data->port_pin_configs[j]; + pins[i].drv_data = &pin_data[i]; + } + + for (i = 0; i < pctrl->data->n_dedicated_pins; i++) { + unsigned int index = pctrl->data->n_port_pins + i; + + pins[index].number = index; + pins[index].name = pctrl->data->dedicated_pins[i].name; + pin_data[index] = pctrl->data->dedicated_pins[i].config; + pins[index].drv_data = &pin_data[index]; + } + + ret = devm_pinctrl_register_and_init(pctrl->dev, &pctrl->desc, pctrl, + &pctrl->pctl); + if (ret) { + dev_err(pctrl->dev, "pinctrl registration failed\n"); + return ret; + } + + ret = pinctrl_enable(pctrl->pctl); + if (ret) { + dev_err(pctrl->dev, "pinctrl enable failed\n"); + return ret; + } + + ret = rzg2l_gpio_register(pctrl); + if (ret) { + dev_err(pctrl->dev, "failed to add GPIO chip: %i\n", ret); + return ret; + } + + return 0; +} + +static void rzg2l_pinctrl_clk_disable(void *data) +{ + clk_disable_unprepare(data); +} + +static int rzg2l_pinctrl_probe(struct platform_device *pdev) +{ + struct rzg2l_pinctrl *pctrl; + int ret; + + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->dev = &pdev->dev; + + pctrl->data = of_device_get_match_data(&pdev->dev); + if (!pctrl->data) + return -EINVAL; + + pctrl->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(pctrl->base)) + return PTR_ERR(pctrl->base); + + pctrl->clk = devm_clk_get(pctrl->dev, NULL); + if (IS_ERR(pctrl->clk)) { + ret = PTR_ERR(pctrl->clk); + dev_err(pctrl->dev, "failed to get GPIO clk : %i\n", ret); + return ret; + } + + spin_lock_init(&pctrl->lock); + + platform_set_drvdata(pdev, pctrl); + + ret = clk_prepare_enable(pctrl->clk); + if (ret) { + dev_err(pctrl->dev, "failed to enable GPIO clk: %i\n", ret); + return ret; + } + + ret = devm_add_action_or_reset(&pdev->dev, rzg2l_pinctrl_clk_disable, + pctrl->clk); + if (ret) { + dev_err(pctrl->dev, + "failed to register GPIO clk disable action, %i\n", + ret); + return ret; + } + + ret = rzg2l_pinctrl_register(pctrl); + if (ret) + return ret; + + dev_info(pctrl->dev, "%s support registered\n", DRV_NAME); + return 0; +} + +static struct rzg2l_pinctrl_data r9a07g044_data = { + .port_pins = rzg2l_gpio_names, + .port_pin_configs = rzg2l_gpio_configs, + .dedicated_pins = rzg2l_dedicated_pins, + .n_port_pins = ARRAY_SIZE(rzg2l_gpio_names), + .n_dedicated_pins = ARRAY_SIZE(rzg2l_dedicated_pins), +}; + +static const struct of_device_id rzg2l_pinctrl_of_table[] = { + { + .compatible = "renesas,r9a07g044-pinctrl", + .data = &r9a07g044_data, + }, + { /* sentinel */ } +}; + +static struct platform_driver rzg2l_pinctrl_driver = { + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(rzg2l_pinctrl_of_table), + }, + .probe = rzg2l_pinctrl_probe, +}; + +static int __init rzg2l_pinctrl_init(void) +{ + return platform_driver_register(&rzg2l_pinctrl_driver); +} +core_initcall(rzg2l_pinctrl_init); + +MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>"); +MODULE_DESCRIPTION("Pin and gpio controller driver for RZ/G2L family"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/renesas/pinctrl.c b/drivers/pinctrl/renesas/pinctrl.c index bb488af29862..f3eecb20c086 100644 --- a/drivers/pinctrl/renesas/pinctrl.c +++ b/drivers/pinctrl/renesas/pinctrl.c @@ -841,7 +841,7 @@ int sh_pfc_register_pinctrl(struct sh_pfc *pfc) return pinctrl_enable(pmx->pctl); } -static const struct pinmux_bias_reg * +const struct pinmux_bias_reg * rcar_pin_to_bias_reg(const struct sh_pfc *pfc, unsigned int pin, unsigned int *bit) { @@ -898,17 +898,17 @@ void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, if (reg->puen) { enable = sh_pfc_read(pfc, reg->puen) & ~BIT(bit); - if (bias != PIN_CONFIG_BIAS_DISABLE) + if (bias != PIN_CONFIG_BIAS_DISABLE) { enable |= BIT(bit); - if (reg->pud) { - updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); - if (bias == PIN_CONFIG_BIAS_PULL_UP) - updown |= BIT(bit); + if (reg->pud) { + updown = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); + if (bias == PIN_CONFIG_BIAS_PULL_UP) + updown |= BIT(bit); - sh_pfc_write(pfc, reg->pud, updown); + sh_pfc_write(pfc, reg->pud, updown); + } } - sh_pfc_write(pfc, reg->puen, enable); } else { enable = sh_pfc_read(pfc, reg->pud) & ~BIT(bit); diff --git a/drivers/pinctrl/renesas/sh_pfc.h b/drivers/pinctrl/renesas/sh_pfc.h index 320898861c4b..2479b4fb9cf9 100644 --- a/drivers/pinctrl/renesas/sh_pfc.h +++ b/drivers/pinctrl/renesas/sh_pfc.h @@ -332,8 +332,8 @@ extern const struct sh_pfc_soc_info r8a7791_pinmux_info; extern const struct sh_pfc_soc_info r8a7792_pinmux_info; extern const struct sh_pfc_soc_info r8a7793_pinmux_info; extern const struct sh_pfc_soc_info r8a7794_pinmux_info; -extern const struct sh_pfc_soc_info r8a77950_pinmux_info __weak; -extern const struct sh_pfc_soc_info r8a77951_pinmux_info __weak; +extern const struct sh_pfc_soc_info r8a77950_pinmux_info; +extern const struct sh_pfc_soc_info r8a77951_pinmux_info; extern const struct sh_pfc_soc_info r8a77960_pinmux_info; extern const struct sh_pfc_soc_info r8a77961_pinmux_info; extern const struct sh_pfc_soc_info r8a77965_pinmux_info; @@ -781,6 +781,9 @@ extern const struct sh_pfc_soc_info shx3_pinmux_info; /* * Bias helpers */ +const struct pinmux_bias_reg * +rcar_pin_to_bias_reg(const struct sh_pfc *pfc, unsigned int pin, + unsigned int *bit); unsigned int rcar_pinmux_get_bias(struct sh_pfc *pfc, unsigned int pin); void rcar_pinmux_set_bias(struct sh_pfc *pfc, unsigned int pin, unsigned int bias); diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c index b6e56422a700..fe5f6046fbd5 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c @@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = { .reg_offset = { 0x00, 0x04, 0x08, 0x0c, }, }; +/* + * Bank type for non-alive type. Bit fields: + * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4 + */ +static const struct samsung_pin_bank_type exynos850_bank_type_off = { + .fld_width = { 4, 1, 4, 4, 2, 4, }, + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, }, +}; + +/* + * Bank type for alive type. Bit fields: + * CON: 4, DAT: 1, PUD: 4, DRV: 4 + */ +static const struct samsung_pin_bank_type exynos850_bank_type_alive = { + .fld_width = { 4, 1, 4, 4, }, + .reg_offset = { 0x00, 0x04, 0x08, 0x0c, }, +}; + /* Pad retention control code for accessing PMU regmap */ static atomic_t exynos_shared_retention_refcnt; @@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = { .ctrl = exynos7_pin_ctrl, .num_ctrl = ARRAY_SIZE(exynos7_pin_ctrl), }; + +/* pin banks of exynos850 pin-controller 0 (ALIVE) */ +static const struct samsung_pin_bank_data exynos850_pin_banks0[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00), + EXYNOS850_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04), + EXYNOS850_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08), + EXYNOS850_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c), + EXYNOS850_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10), + EXYNOS850_PIN_BANK_EINTN(3, 0x0a0, "gpq0"), +}; + +/* pin banks of exynos850 pin-controller 1 (CMGP) */ +static const struct samsung_pin_bank_data exynos850_pin_banks1[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00), + EXYNOS850_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04), + EXYNOS850_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08), + EXYNOS850_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0c), + EXYNOS850_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10), + EXYNOS850_PIN_BANK_EINTW(1, 0x0a0, "gpm5", 0x14), + EXYNOS850_PIN_BANK_EINTW(1, 0x0c0, "gpm6", 0x18), + EXYNOS850_PIN_BANK_EINTW(1, 0x0e0, "gpm7", 0x1c), +}; + +/* pin banks of exynos850 pin-controller 2 (AUD) */ +static const struct samsung_pin_bank_data exynos850_pin_banks2[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00), + EXYNOS850_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04), +}; + +/* pin banks of exynos850 pin-controller 3 (HSI) */ +static const struct samsung_pin_bank_data exynos850_pin_banks3[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00), +}; + +/* pin banks of exynos850 pin-controller 4 (CORE) */ +static const struct samsung_pin_bank_data exynos850_pin_banks4[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00), + EXYNOS850_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04), +}; + +/* pin banks of exynos850 pin-controller 5 (PERI) */ +static const struct samsung_pin_bank_data exynos850_pin_banks5[] __initconst = { + /* Must start with EINTG banks, ordered by EINT group number. */ + EXYNOS850_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00), + EXYNOS850_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04), + EXYNOS850_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08), + EXYNOS850_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0c), + EXYNOS850_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10), + EXYNOS850_PIN_BANK_EINTG(8, 0x0a0, "gpg2", 0x14), + EXYNOS850_PIN_BANK_EINTG(1, 0x0c0, "gpg3", 0x18), + EXYNOS850_PIN_BANK_EINTG(3, 0x0e0, "gpc0", 0x1c), + EXYNOS850_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20), +}; + +static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = { + { + /* pin-controller instance 0 ALIVE data */ + .pin_banks = exynos850_pin_banks0, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks0), + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + }, { + /* pin-controller instance 1 CMGP data */ + .pin_banks = exynos850_pin_banks1, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks1), + .eint_gpio_init = exynos_eint_gpio_init, + .eint_wkup_init = exynos_eint_wkup_init, + }, { + /* pin-controller instance 2 AUD data */ + .pin_banks = exynos850_pin_banks2, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks2), + }, { + /* pin-controller instance 3 HSI data */ + .pin_banks = exynos850_pin_banks3, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks3), + .eint_gpio_init = exynos_eint_gpio_init, + }, { + /* pin-controller instance 4 CORE data */ + .pin_banks = exynos850_pin_banks4, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks4), + .eint_gpio_init = exynos_eint_gpio_init, + }, { + /* pin-controller instance 5 PERI data */ + .pin_banks = exynos850_pin_banks5, + .nr_banks = ARRAY_SIZE(exynos850_pin_banks5), + .eint_gpio_init = exynos_eint_gpio_init, + }, +}; + +const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = { + .ctrl = exynos850_pin_ctrl, + .num_ctrl = ARRAY_SIZE(exynos850_pin_ctrl), +}; diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h index da1ec13697e7..bfad1ced8017 100644 --- a/drivers/pinctrl/samsung/pinctrl-exynos.h +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h @@ -108,6 +108,35 @@ .pctl_res_idx = pctl_idx, \ } \ +#define EXYNOS850_PIN_BANK_EINTN(pins, reg, id) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_NONE, \ + .name = id \ + } + +#define EXYNOS850_PIN_BANK_EINTG(pins, reg, id, offs) \ + { \ + .type = &exynos850_bank_type_off, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_GPIO, \ + .eint_offset = offs, \ + .name = id \ + } + +#define EXYNOS850_PIN_BANK_EINTW(pins, reg, id, offs) \ + { \ + .type = &exynos850_bank_type_alive, \ + .pctl_offset = reg, \ + .nr_pins = pins, \ + .eint_type = EINT_TYPE_WKUP, \ + .eint_offset = offs, \ + .name = id \ + } + /** * struct exynos_weint_data: irq specific data for all the wakeup interrupts * generated by the external wakeup interrupt controller. diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c index 376876bd6605..2a0fc63516f1 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -918,7 +918,7 @@ static int samsung_pinctrl_register(struct platform_device *pdev, pin_bank->grange.pin_base = drvdata->pin_base + pin_bank->pin_base; pin_bank->grange.base = pin_bank->grange.pin_base; - pin_bank->grange.npins = pin_bank->gpio_chip.ngpio; + pin_bank->grange.npins = pin_bank->nr_pins; pin_bank->grange.gc = &pin_bank->gpio_chip; pinctrl_add_gpio_range(drvdata->pctl_dev, &pin_bank->grange); } @@ -1264,6 +1264,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = { .data = &exynos5433_of_data }, { .compatible = "samsung,exynos7-pinctrl", .data = &exynos7_of_data }, + { .compatible = "samsung,exynos850-pinctrl", + .data = &exynos850_of_data }, #endif #ifdef CONFIG_PINCTRL_S3C64XX { .compatible = "samsung,s3c64xx-pinctrl", diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.h b/drivers/pinctrl/samsung/pinctrl-samsung.h index de44f8ec330b..4c2149e9c544 100644 --- a/drivers/pinctrl/samsung/pinctrl-samsung.h +++ b/drivers/pinctrl/samsung/pinctrl-samsung.h @@ -339,6 +339,7 @@ extern const struct samsung_pinctrl_of_match_data exynos5410_of_data; extern const struct samsung_pinctrl_of_match_data exynos5420_of_data; extern const struct samsung_pinctrl_of_match_data exynos5433_of_data; extern const struct samsung_pinctrl_of_match_data exynos7_of_data; +extern const struct samsung_pinctrl_of_match_data exynos850_of_data; extern const struct samsung_pinctrl_of_match_data s3c64xx_of_data; extern const struct samsung_pinctrl_of_match_data s3c2412_of_data; extern const struct samsung_pinctrl_of_match_data s3c2416_of_data; diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig index f36f29113370..d532f3c6f670 100644 --- a/drivers/pinctrl/stm32/Kconfig +++ b/drivers/pinctrl/stm32/Kconfig @@ -40,6 +40,12 @@ config PINCTRL_STM32H743 default MACH_STM32H743 select PINCTRL_STM32 +config PINCTRL_STM32MP135 + bool "STMicroelectronics STM32MP135 pin control" if COMPILE_TEST && !MACH_STM32MP13 + depends on OF && HAS_IOMEM + default MACH_STM32MP13 + select PINCTRL_STM32 + config PINCTRL_STM32MP157 bool "STMicroelectronics STM32MP157 pin control" if COMPILE_TEST && !MACH_STM32MP157 depends on OF && HAS_IOMEM diff --git a/drivers/pinctrl/stm32/Makefile b/drivers/pinctrl/stm32/Makefile index f7c56d4b941c..619629ee9944 100644 --- a/drivers/pinctrl/stm32/Makefile +++ b/drivers/pinctrl/stm32/Makefile @@ -8,4 +8,5 @@ obj-$(CONFIG_PINCTRL_STM32F469) += pinctrl-stm32f469.o obj-$(CONFIG_PINCTRL_STM32F746) += pinctrl-stm32f746.o obj-$(CONFIG_PINCTRL_STM32F769) += pinctrl-stm32f769.o obj-$(CONFIG_PINCTRL_STM32H743) += pinctrl-stm32h743.o +obj-$(CONFIG_PINCTRL_STM32MP135) += pinctrl-stm32mp135.o obj-$(CONFIG_PINCTRL_STM32MP157) += pinctrl-stm32mp157.o diff --git a/drivers/pinctrl/stm32/pinctrl-stm32mp135.c b/drivers/pinctrl/stm32/pinctrl-stm32mp135.c new file mode 100644 index 000000000000..4ab03520c407 --- /dev/null +++ b/drivers/pinctrl/stm32/pinctrl-stm32mp135.c @@ -0,0 +1,1679 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) STMicroelectronics 2021 - All Rights Reserved + * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics. + */ +#include <linux/init.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "pinctrl-stm32.h" + +static const struct stm32_desc_pin stm32mp135_pins[] = { + STM32_PIN( + PINCTRL_PIN(0, "PA0"), + STM32_FUNCTION(0, "GPIOA0"), + STM32_FUNCTION(2, "TIM2_CH1"), + STM32_FUNCTION(3, "TIM5_CH1"), + STM32_FUNCTION(4, "TIM8_ETR"), + STM32_FUNCTION(5, "TIM15_BKIN"), + STM32_FUNCTION(7, "SAI1_SD_B"), + STM32_FUNCTION(9, "UART5_TX"), + STM32_FUNCTION(12, "ETH1_MII_CRS"), + STM32_FUNCTION(13, "ETH2_MII_CRS"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(1, "PA1"), + STM32_FUNCTION(0, "GPIOA1"), + STM32_FUNCTION(2, "TIM2_CH2"), + STM32_FUNCTION(3, "TIM5_CH2"), + STM32_FUNCTION(4, "LPTIM3_OUT"), + STM32_FUNCTION(5, "TIM15_CH1N"), + STM32_FUNCTION(7, "DFSDM1_CKIN0"), + STM32_FUNCTION(8, "USART2_RTS USART2_DE"), + STM32_FUNCTION(12, "ETH1_MII_RX_CLK ETH1_RGMII_RX_CLK ETH1_RMII_REF_CLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(2, "PA2"), + STM32_FUNCTION(0, "GPIOA2"), + STM32_FUNCTION(2, "TIM2_CH3"), + STM32_FUNCTION(3, "TIM5_CH3"), + STM32_FUNCTION(4, "LPTIM4_OUT"), + STM32_FUNCTION(5, "TIM15_CH1"), + STM32_FUNCTION(8, "USART2_TX"), + STM32_FUNCTION(12, "ETH1_MDIO"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(3, "PA3"), + STM32_FUNCTION(0, "GPIOA3"), + STM32_FUNCTION(2, "TIM2_CH4"), + STM32_FUNCTION(3, "TIM5_CH4"), + STM32_FUNCTION(4, "LPTIM5_OUT"), + STM32_FUNCTION(5, "TIM15_CH2"), + STM32_FUNCTION(6, "SPI1_MOSI I2S1_SDO"), + STM32_FUNCTION(7, "SAI1_FS_B"), + STM32_FUNCTION(8, "USART2_RX"), + STM32_FUNCTION(12, "ETH1_MII_COL"), + STM32_FUNCTION(13, "ETH2_MII_COL"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(4, "PA4"), + STM32_FUNCTION(0, "GPIOA4"), + STM32_FUNCTION(3, "TIM5_ETR"), + STM32_FUNCTION(4, "USART2_CK"), + STM32_FUNCTION(5, "SAI1_SCK_B"), + STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"), + STM32_FUNCTION(7, "DFSDM1_CKIN1"), + STM32_FUNCTION(11, "ETH1_PPS_OUT"), + STM32_FUNCTION(12, "ETH2_PPS_OUT"), + STM32_FUNCTION(13, "SAI1_SCK_A"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(5, "PA5"), + STM32_FUNCTION(0, "GPIOA5"), + STM32_FUNCTION(2, "TIM2_CH1 TIM2_ETR"), + STM32_FUNCTION(3, "USART2_CK"), + STM32_FUNCTION(4, "TIM8_CH1N"), + STM32_FUNCTION(5, "SAI1_D1"), + STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"), + STM32_FUNCTION(7, "SAI1_SD_A"), + STM32_FUNCTION(11, "ETH1_PPS_OUT"), + STM32_FUNCTION(12, "ETH2_PPS_OUT"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(6, "PA6"), + STM32_FUNCTION(0, "GPIOA6"), + STM32_FUNCTION(2, "TIM1_BKIN"), + STM32_FUNCTION(3, "TIM3_CH1"), + STM32_FUNCTION(4, "TIM8_BKIN"), + STM32_FUNCTION(5, "SAI2_CK2"), + STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"), + STM32_FUNCTION(8, "USART1_CK"), + STM32_FUNCTION(9, "UART4_RTS UART4_DE"), + STM32_FUNCTION(10, "TIM13_CH1"), + STM32_FUNCTION(13, "SAI2_SCK_A"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(7, "PA7"), + STM32_FUNCTION(0, "GPIOA7"), + STM32_FUNCTION(2, "TIM1_CH1N"), + STM32_FUNCTION(3, "TIM3_CH2"), + STM32_FUNCTION(4, "TIM8_CH1N"), + STM32_FUNCTION(5, "SAI2_D1"), + STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"), + STM32_FUNCTION(8, "USART1_CTS USART1_NSS"), + STM32_FUNCTION(10, "TIM14_CH1"), + STM32_FUNCTION(12, "ETH1_MII_RX_DV ETH1_RGMII_RX_CTL ETH1_RMII_CRS_DV"), + STM32_FUNCTION(13, "SAI2_SD_A"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(8, "PA8"), + STM32_FUNCTION(0, "GPIOA8"), + STM32_FUNCTION(1, "MCO1"), + STM32_FUNCTION(3, "SAI2_MCLK_A"), + STM32_FUNCTION(4, "TIM8_BKIN2"), + STM32_FUNCTION(5, "I2C4_SDA"), + STM32_FUNCTION(6, "SPI5_MISO"), + STM32_FUNCTION(7, "SAI2_CK1"), + STM32_FUNCTION(8, "USART1_CK"), + STM32_FUNCTION(9, "SPI2_MOSI I2S2_SDO"), + STM32_FUNCTION(11, "OTG_HS_SOF"), + STM32_FUNCTION(12, "ETH2_MII_RXD3 ETH2_RGMII_RXD3"), + STM32_FUNCTION(13, "FMC_A21"), + STM32_FUNCTION(15, "LCD_B7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(9, "PA9"), + STM32_FUNCTION(0, "GPIOA9"), + STM32_FUNCTION(2, "TIM1_CH2"), + STM32_FUNCTION(5, "I2C3_SMBA"), + STM32_FUNCTION(7, "DFSDM1_DATIN0"), + STM32_FUNCTION(8, "USART1_TX"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(11, "FMC_NWAIT"), + STM32_FUNCTION(14, "DCMIPP_D0"), + STM32_FUNCTION(15, "LCD_R6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(10, "PA10"), + STM32_FUNCTION(0, "GPIOA10"), + STM32_FUNCTION(2, "TIM1_CH3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(11, "PA11"), + STM32_FUNCTION(0, "GPIOA11"), + STM32_FUNCTION(2, "TIM1_CH4"), + STM32_FUNCTION(5, "I2C5_SCL"), + STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"), + STM32_FUNCTION(8, "USART1_CTS USART1_NSS"), + STM32_FUNCTION(11, "ETH2_MII_RXD1 ETH2_RGMII_RXD1 ETH2_RMII_RXD1"), + STM32_FUNCTION(12, "ETH1_CLK"), + STM32_FUNCTION(14, "ETH2_CLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(12, "PA12"), + STM32_FUNCTION(0, "GPIOA12"), + STM32_FUNCTION(2, "TIM1_ETR"), + STM32_FUNCTION(3, "SAI2_MCLK_A"), + STM32_FUNCTION(8, "USART1_RTS USART1_DE"), + STM32_FUNCTION(11, "TSC_G1_IO2"), + STM32_FUNCTION(12, "ETH2_MII_RX_DV ETH2_RGMII_RX_CTL ETH2_RMII_CRS_DV"), + STM32_FUNCTION(13, "FMC_A7"), + STM32_FUNCTION(14, "DCMIPP_D1"), + STM32_FUNCTION(15, "LCD_G6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(13, "PA13"), + STM32_FUNCTION(0, "GPIOA13"), + STM32_FUNCTION(1, "DBTRGO"), + STM32_FUNCTION(2, "DBTRGI"), + STM32_FUNCTION(3, "MCO1"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(14, "PA14"), + STM32_FUNCTION(0, "GPIOA14"), + STM32_FUNCTION(1, "DBTRGO"), + STM32_FUNCTION(2, "DBTRGI"), + STM32_FUNCTION(3, "MCO2"), + STM32_FUNCTION(11, "OTG_HS_SOF"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(15, "PA15"), + STM32_FUNCTION(0, "GPIOA15"), + STM32_FUNCTION(1, "TRACED5"), + STM32_FUNCTION(2, "TIM2_CH1"), + STM32_FUNCTION(6, "I2S4_MCK"), + STM32_FUNCTION(8, "UART4_RTS UART4_DE"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(10, "LCD_R0"), + STM32_FUNCTION(11, "TSC_G3_IO1"), + STM32_FUNCTION(12, "LCD_G7"), + STM32_FUNCTION(13, "FMC_A9"), + STM32_FUNCTION(14, "DCMIPP_D14"), + STM32_FUNCTION(15, "DCMIPP_D5"), + STM32_FUNCTION(16, "HDP5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(16, "PB0"), + STM32_FUNCTION(0, "GPIOB0"), + STM32_FUNCTION(1, "DBTRGI"), + STM32_FUNCTION(2, "TIM1_CH2N"), + STM32_FUNCTION(3, "TIM3_CH3"), + STM32_FUNCTION(4, "TIM8_CH2N"), + STM32_FUNCTION(5, "USART1_RX"), + STM32_FUNCTION(6, "I2S1_MCK"), + STM32_FUNCTION(7, "SAI2_FS_A"), + STM32_FUNCTION(8, "USART1_CK"), + STM32_FUNCTION(9, "UART4_CTS"), + STM32_FUNCTION(11, "SAI2_D2"), + STM32_FUNCTION(12, "ETH1_MII_RXD2 ETH1_RGMII_RXD2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(17, "PB1"), + STM32_FUNCTION(0, "GPIOB1"), + STM32_FUNCTION(2, "TIM1_CH3N"), + STM32_FUNCTION(3, "TIM3_CH4"), + STM32_FUNCTION(4, "TIM8_CH3N"), + STM32_FUNCTION(6, "SPI1_SCK I2S1_CK"), + STM32_FUNCTION(7, "DFSDM1_DATIN1"), + STM32_FUNCTION(8, "UART4_RX"), + STM32_FUNCTION(12, "ETH1_MII_RXD3 ETH1_RGMII_RXD3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(18, "PB2"), + STM32_FUNCTION(0, "GPIOB2"), + STM32_FUNCTION(2, "RTC_OUT2"), + STM32_FUNCTION(3, "SAI1_D1"), + STM32_FUNCTION(6, "I2S_CKIN"), + STM32_FUNCTION(7, "SAI1_SD_A"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(10, "QUADSPI_BK1_NCS"), + STM32_FUNCTION(12, "ETH2_MDIO"), + STM32_FUNCTION(13, "FMC_A6"), + STM32_FUNCTION(15, "LCD_B4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(19, "PB3"), + STM32_FUNCTION(0, "GPIOB3"), + STM32_FUNCTION(1, "TRACED2"), + STM32_FUNCTION(2, "TIM2_CH2"), + STM32_FUNCTION(5, "SAI2_CK1"), + STM32_FUNCTION(6, "SPI4_NSS I2S4_WS"), + STM32_FUNCTION(9, "SDMMC1_D123DIR"), + STM32_FUNCTION(11, "SDMMC2_D2"), + STM32_FUNCTION(12, "LCD_R6"), + STM32_FUNCTION(13, "SAI2_MCLK_A"), + STM32_FUNCTION(14, "UART7_RX"), + STM32_FUNCTION(15, "LCD_B2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(20, "PB4"), + STM32_FUNCTION(0, "GPIOB4"), + STM32_FUNCTION(1, "TRACED14"), + STM32_FUNCTION(2, "TIM16_BKIN"), + STM32_FUNCTION(3, "TIM3_CH1"), + STM32_FUNCTION(5, "SAI2_CK2"), + STM32_FUNCTION(6, "SPI4_SCK I2S4_CK"), + STM32_FUNCTION(8, "USART3_CK"), + STM32_FUNCTION(11, "SDMMC2_D3"), + STM32_FUNCTION(12, "LCD_G1"), + STM32_FUNCTION(13, "SAI2_SCK_A"), + STM32_FUNCTION(14, "LCD_B6"), + STM32_FUNCTION(15, "LCD_R0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(21, "PB5"), + STM32_FUNCTION(0, "GPIOB5"), + STM32_FUNCTION(1, "TRACED4"), + STM32_FUNCTION(2, "TIM17_BKIN"), + STM32_FUNCTION(3, "TIM3_CH2"), + STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"), + STM32_FUNCTION(7, "I2C4_SMBA"), + STM32_FUNCTION(9, "SDMMC1_CKIN"), + STM32_FUNCTION(10, "FDCAN2_RX"), + STM32_FUNCTION(12, "UART5_RX"), + STM32_FUNCTION(14, "LCD_B6"), + STM32_FUNCTION(15, "LCD_DE"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(22, "PB6"), + STM32_FUNCTION(0, "GPIOB6"), + STM32_FUNCTION(1, "TRACED6"), + STM32_FUNCTION(2, "TIM16_CH1N"), + STM32_FUNCTION(3, "TIM4_CH1"), + STM32_FUNCTION(4, "TIM8_CH1"), + STM32_FUNCTION(5, "USART1_TX"), + STM32_FUNCTION(7, "SAI1_CK2"), + STM32_FUNCTION(8, "LCD_B6"), + STM32_FUNCTION(10, "QUADSPI_BK1_NCS"), + STM32_FUNCTION(11, "TSC_G1_IO4"), + STM32_FUNCTION(12, "ETH2_MDIO"), + STM32_FUNCTION(13, "FMC_NE3"), + STM32_FUNCTION(14, "DCMIPP_D5"), + STM32_FUNCTION(15, "LCD_B7"), + STM32_FUNCTION(16, "HDP6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(23, "PB7"), + STM32_FUNCTION(0, "GPIOB7"), + STM32_FUNCTION(2, "TIM17_CH1N"), + STM32_FUNCTION(3, "TIM4_CH2"), + STM32_FUNCTION(4, "TSC_SYNC"), + STM32_FUNCTION(6, "I2S4_CK"), + STM32_FUNCTION(7, "I2C4_SDA"), + STM32_FUNCTION(11, "FMC_NCE2"), + STM32_FUNCTION(13, "FMC_NL"), + STM32_FUNCTION(14, "DCMIPP_D13"), + STM32_FUNCTION(15, "DCMIPP_PIXCLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(24, "PB8"), + STM32_FUNCTION(0, "GPIOB8"), + STM32_FUNCTION(2, "TIM16_CH1"), + STM32_FUNCTION(3, "TIM4_CH3"), + STM32_FUNCTION(5, "I2C1_SCL"), + STM32_FUNCTION(6, "I2C3_SCL"), + STM32_FUNCTION(7, "DFSDM1_DATIN1"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(11, "SAI1_D1"), + STM32_FUNCTION(13, "FMC_D13 FMC_AD13"), + STM32_FUNCTION(14, "DCMIPP_D6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(25, "PB9"), + STM32_FUNCTION(0, "GPIOB9"), + STM32_FUNCTION(1, "TRACED3"), + STM32_FUNCTION(3, "TIM4_CH4"), + STM32_FUNCTION(7, "I2C4_SDA"), + STM32_FUNCTION(10, "FDCAN1_TX"), + STM32_FUNCTION(11, "SDMMC2_D5"), + STM32_FUNCTION(12, "UART5_TX"), + STM32_FUNCTION(13, "SDMMC1_CDIR"), + STM32_FUNCTION(14, "LCD_DE"), + STM32_FUNCTION(15, "LCD_B1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(26, "PB10"), + STM32_FUNCTION(0, "GPIOB10"), + STM32_FUNCTION(2, "TIM2_CH3"), + STM32_FUNCTION(4, "LPTIM2_IN1"), + STM32_FUNCTION(5, "I2C5_SMBA"), + STM32_FUNCTION(6, "SPI4_NSS I2S4_WS"), + STM32_FUNCTION(7, "SPI2_SCK I2S2_CK"), + STM32_FUNCTION(8, "USART3_TX"), + STM32_FUNCTION(15, "LCD_R3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(27, "PB11"), + STM32_FUNCTION(0, "GPIOB11"), + STM32_FUNCTION(2, "TIM2_CH4"), + STM32_FUNCTION(4, "LPTIM1_OUT"), + STM32_FUNCTION(5, "I2C5_SMBA"), + STM32_FUNCTION(8, "USART3_RX"), + STM32_FUNCTION(12, "ETH1_MII_TX_EN ETH1_RGMII_TX_CTL ETH1_RMII_TX_EN"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(28, "PB12"), + STM32_FUNCTION(0, "GPIOB12"), + STM32_FUNCTION(1, "TRACED10"), + STM32_FUNCTION(5, "I2C2_SMBA"), + STM32_FUNCTION(7, "DFSDM1_DATIN1"), + STM32_FUNCTION(8, "UART7_RTS UART7_DE"), + STM32_FUNCTION(9, "USART3_RX"), + STM32_FUNCTION(12, "UART5_RX"), + STM32_FUNCTION(13, "SDMMC1_D5"), + STM32_FUNCTION(14, "LCD_R3"), + STM32_FUNCTION(15, "LCD_VSYNC"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(29, "PB13"), + STM32_FUNCTION(0, "GPIOB13"), + STM32_FUNCTION(1, "TRACECLK"), + STM32_FUNCTION(2, "TIM1_CH1N"), + STM32_FUNCTION(5, "LPTIM2_OUT"), + STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"), + STM32_FUNCTION(7, "I2C4_SCL"), + STM32_FUNCTION(9, "SDMMC1_D123DIR"), + STM32_FUNCTION(10, "FDCAN2_TX"), + STM32_FUNCTION(12, "UART5_TX"), + STM32_FUNCTION(14, "LCD_CLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(30, "PB14"), + STM32_FUNCTION(0, "GPIOB14"), + STM32_FUNCTION(1, "TRACED0"), + STM32_FUNCTION(2, "TIM1_CH2N"), + STM32_FUNCTION(3, "TIM12_CH1"), + STM32_FUNCTION(4, "TIM8_CH2N"), + STM32_FUNCTION(5, "USART1_TX"), + STM32_FUNCTION(11, "SDMMC2_D0"), + STM32_FUNCTION(12, "SDMMC1_D4"), + STM32_FUNCTION(14, "LCD_R0"), + STM32_FUNCTION(15, "LCD_G5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(31, "PB15"), + STM32_FUNCTION(0, "GPIOB15"), + STM32_FUNCTION(1, "RTC_REFIN"), + STM32_FUNCTION(2, "TIM1_CH3N"), + STM32_FUNCTION(3, "TIM12_CH2"), + STM32_FUNCTION(4, "TIM8_CH3N"), + STM32_FUNCTION(5, "SAI2_D2"), + STM32_FUNCTION(6, "SPI4_MOSI I2S4_SDO"), + STM32_FUNCTION(7, "DFSDM1_CKIN2"), + STM32_FUNCTION(8, "UART7_CTS"), + STM32_FUNCTION(9, "SDMMC1_CKIN"), + STM32_FUNCTION(11, "SDMMC2_D1"), + STM32_FUNCTION(13, "SAI2_FS_A"), + STM32_FUNCTION(14, "LCD_CLK"), + STM32_FUNCTION(15, "LCD_B0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(32, "PC0"), + STM32_FUNCTION(0, "GPIOC0"), + STM32_FUNCTION(3, "SAI1_SCK_A"), + STM32_FUNCTION(5, "SAI1_CK2"), + STM32_FUNCTION(6, "I2S1_MCK"), + STM32_FUNCTION(7, "SPI1_MOSI I2S1_SDO"), + STM32_FUNCTION(8, "USART1_TX"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(33, "PC1"), + STM32_FUNCTION(0, "GPIOC1"), + STM32_FUNCTION(4, "DFSDM1_DATIN0"), + STM32_FUNCTION(7, "SAI1_D3"), + STM32_FUNCTION(11, "ETH1_MII_RX_DV ETH1_RMII_CRS_DV"), + STM32_FUNCTION(12, "ETH1_RGMII_GTX_CLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(34, "PC2"), + STM32_FUNCTION(0, "GPIOC2"), + STM32_FUNCTION(2, "SPI5_NSS"), + STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"), + STM32_FUNCTION(7, "SAI2_MCLK_A"), + STM32_FUNCTION(8, "USART1_RTS USART1_DE"), + STM32_FUNCTION(11, "SAI2_CK1"), + STM32_FUNCTION(12, "ETH1_MII_TXD2 ETH1_RGMII_TXD2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(35, "PC3"), + STM32_FUNCTION(0, "GPIOC3"), + STM32_FUNCTION(3, "SAI1_CK1"), + STM32_FUNCTION(4, "DFSDM1_CKOUT"), + STM32_FUNCTION(6, "SPI1_MISO I2S1_SDI"), + STM32_FUNCTION(7, "SPI1_SCK I2S1_CK"), + STM32_FUNCTION(9, "UART5_CTS"), + STM32_FUNCTION(11, "SAI1_MCLK_A"), + STM32_FUNCTION(12, "ETH1_MII_TX_CLK"), + STM32_FUNCTION(13, "ETH2_MII_TX_CLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(36, "PC4"), + STM32_FUNCTION(0, "GPIOC4"), + STM32_FUNCTION(3, "TIM3_ETR"), + STM32_FUNCTION(4, "DFSDM1_CKIN2"), + STM32_FUNCTION(5, "SAI1_D3"), + STM32_FUNCTION(6, "I2S1_MCK"), + STM32_FUNCTION(9, "UART5_RTS UART5_DE"), + STM32_FUNCTION(10, "SPDIFRX_IN2"), + STM32_FUNCTION(12, "ETH1_MII_RXD0 ETH1_RGMII_RXD0 ETH1_RMII_RXD0"), + STM32_FUNCTION(13, "SAI2_D3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(37, "PC5"), + STM32_FUNCTION(0, "GPIOC5"), + STM32_FUNCTION(4, "DFSDM1_DATIN2"), + STM32_FUNCTION(5, "SAI2_D4"), + STM32_FUNCTION(6, "I2S_CKIN"), + STM32_FUNCTION(7, "SAI1_D4"), + STM32_FUNCTION(8, "USART2_CTS USART2_NSS"), + STM32_FUNCTION(10, "SPDIFRX_IN3"), + STM32_FUNCTION(12, "ETH1_MII_RXD1 ETH1_RGMII_RXD1 ETH1_RMII_RXD1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(38, "PC6"), + STM32_FUNCTION(0, "GPIOC6"), + STM32_FUNCTION(1, "TRACED2"), + STM32_FUNCTION(3, "TIM3_CH1"), + STM32_FUNCTION(4, "TIM8_CH1"), + STM32_FUNCTION(5, "DFSDM1_DATIN0"), + STM32_FUNCTION(6, "I2S3_MCK"), + STM32_FUNCTION(8, "USART6_TX"), + STM32_FUNCTION(9, "SDMMC1_D6"), + STM32_FUNCTION(10, "SDMMC2_D0DIR"), + STM32_FUNCTION(11, "SDMMC2_D6"), + STM32_FUNCTION(12, "LCD_B1"), + STM32_FUNCTION(13, "FMC_A19"), + STM32_FUNCTION(14, "LCD_R6"), + STM32_FUNCTION(15, "LCD_HSYNC"), + STM32_FUNCTION(16, "HDP2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(39, "PC7"), + STM32_FUNCTION(0, "GPIOC7"), + STM32_FUNCTION(1, "TRACED4"), + STM32_FUNCTION(3, "TIM3_CH2"), + STM32_FUNCTION(4, "TIM8_CH2"), + STM32_FUNCTION(7, "I2S2_MCK"), + STM32_FUNCTION(8, "USART6_RX"), + STM32_FUNCTION(9, "USART3_CTS"), + STM32_FUNCTION(10, "SDMMC2_CDIR"), + STM32_FUNCTION(11, "SDMMC2_D7"), + STM32_FUNCTION(12, "LCD_R1"), + STM32_FUNCTION(13, "SDMMC1_D7"), + STM32_FUNCTION(15, "LCD_G6"), + STM32_FUNCTION(16, "HDP4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(40, "PC8"), + STM32_FUNCTION(0, "GPIOC8"), + STM32_FUNCTION(1, "TRACED0"), + STM32_FUNCTION(3, "TIM3_CH3"), + STM32_FUNCTION(4, "TIM8_CH3"), + STM32_FUNCTION(6, "SPI3_MISO I2S3_SDI"), + STM32_FUNCTION(8, "USART6_CK"), + STM32_FUNCTION(9, "USART3_CTS"), + STM32_FUNCTION(11, "SAI2_FS_B"), + STM32_FUNCTION(12, "UART5_RTS UART5_DE"), + STM32_FUNCTION(13, "SDMMC1_D0"), + STM32_FUNCTION(15, "LCD_G7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(41, "PC9"), + STM32_FUNCTION(0, "GPIOC9"), + STM32_FUNCTION(1, "TRACED1"), + STM32_FUNCTION(3, "TIM3_CH4"), + STM32_FUNCTION(4, "TIM8_CH4"), + STM32_FUNCTION(8, "USART3_RTS"), + STM32_FUNCTION(9, "UART5_CTS"), + STM32_FUNCTION(10, "FDCAN1_TX"), + STM32_FUNCTION(13, "SDMMC1_D1"), + STM32_FUNCTION(15, "LCD_B4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(42, "PC10"), + STM32_FUNCTION(0, "GPIOC10"), + STM32_FUNCTION(1, "TRACED2"), + STM32_FUNCTION(6, "I2C1_SCL"), + STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"), + STM32_FUNCTION(8, "USART3_TX"), + STM32_FUNCTION(11, "SAI2_MCLK_B"), + STM32_FUNCTION(13, "SDMMC1_D2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(43, "PC11"), + STM32_FUNCTION(0, "GPIOC11"), + STM32_FUNCTION(1, "TRACED3"), + STM32_FUNCTION(5, "I2C1_SDA"), + STM32_FUNCTION(7, "SPI3_MOSI I2S3_SDO"), + STM32_FUNCTION(8, "USART3_CK"), + STM32_FUNCTION(9, "UART5_RX"), + STM32_FUNCTION(11, "SAI2_SCK_B"), + STM32_FUNCTION(13, "SDMMC1_D3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(44, "PC12"), + STM32_FUNCTION(0, "GPIOC12"), + STM32_FUNCTION(1, "TRACECLK"), + STM32_FUNCTION(9, "UART7_TX"), + STM32_FUNCTION(11, "SAI2_SD_B"), + STM32_FUNCTION(13, "SDMMC1_CK"), + STM32_FUNCTION(15, "LCD_DE"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(45, "PC13"), + STM32_FUNCTION(0, "GPIOC13"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(46, "PC14"), + STM32_FUNCTION(0, "GPIOC14"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(47, "PC15"), + STM32_FUNCTION(0, "GPIOC15"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(48, "PD0"), + STM32_FUNCTION(0, "GPIOD0"), + STM32_FUNCTION(3, "SAI1_MCLK_A"), + STM32_FUNCTION(7, "SAI1_CK1"), + STM32_FUNCTION(10, "FDCAN1_RX"), + STM32_FUNCTION(13, "FMC_D2 FMC_AD2"), + STM32_FUNCTION(14, "DCMIPP_D1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(49, "PD1"), + STM32_FUNCTION(0, "GPIOD1"), + STM32_FUNCTION(5, "I2C5_SCL"), + STM32_FUNCTION(6, "SPI4_MOSI I2S4_SDO"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(10, "QUADSPI_BK1_NCS"), + STM32_FUNCTION(12, "LCD_B6"), + STM32_FUNCTION(13, "FMC_D3 FMC_AD3"), + STM32_FUNCTION(14, "DCMIPP_D13"), + STM32_FUNCTION(15, "LCD_G2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(50, "PD2"), + STM32_FUNCTION(0, "GPIOD2"), + STM32_FUNCTION(1, "TRACED4"), + STM32_FUNCTION(3, "TIM3_ETR"), + STM32_FUNCTION(5, "I2C1_SMBA"), + STM32_FUNCTION(6, "SPI3_NSS I2S3_WS"), + STM32_FUNCTION(7, "SAI2_D1"), + STM32_FUNCTION(8, "USART3_RX"), + STM32_FUNCTION(13, "SDMMC1_CMD"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(51, "PD3"), + STM32_FUNCTION(0, "GPIOD3"), + STM32_FUNCTION(3, "TIM2_CH1"), + STM32_FUNCTION(4, "USART2_CTS USART2_NSS"), + STM32_FUNCTION(5, "DFSDM1_CKOUT"), + STM32_FUNCTION(6, "I2C1_SDA"), + STM32_FUNCTION(7, "SAI1_D3"), + STM32_FUNCTION(13, "FMC_CLK"), + STM32_FUNCTION(14, "DCMIPP_D5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(52, "PD4"), + STM32_FUNCTION(0, "GPIOD4"), + STM32_FUNCTION(4, "USART2_RTS USART2_DE"), + STM32_FUNCTION(6, "SPI3_MISO I2S3_SDI"), + STM32_FUNCTION(7, "DFSDM1_CKIN0"), + STM32_FUNCTION(10, "QUADSPI_CLK"), + STM32_FUNCTION(12, "LCD_R1"), + STM32_FUNCTION(13, "FMC_NOE"), + STM32_FUNCTION(14, "LCD_R4"), + STM32_FUNCTION(15, "LCD_R6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(53, "PD5"), + STM32_FUNCTION(0, "GPIOD5"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO0"), + STM32_FUNCTION(13, "FMC_NWE"), + STM32_FUNCTION(14, "LCD_B0"), + STM32_FUNCTION(15, "LCD_G4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(54, "PD6"), + STM32_FUNCTION(0, "GPIOD6"), + STM32_FUNCTION(2, "TIM16_CH1N"), + STM32_FUNCTION(3, "SAI1_D1"), + STM32_FUNCTION(7, "SAI1_SD_A"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(12, "TSC_G2_IO1"), + STM32_FUNCTION(14, "DCMIPP_D4"), + STM32_FUNCTION(15, "DCMIPP_D0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(55, "PD7"), + STM32_FUNCTION(0, "GPIOD7"), + STM32_FUNCTION(1, "MCO1"), + STM32_FUNCTION(4, "USART2_CK"), + STM32_FUNCTION(5, "I2C2_SCL"), + STM32_FUNCTION(6, "I2C3_SDA"), + STM32_FUNCTION(10, "SPDIFRX_IN0"), + STM32_FUNCTION(11, "ETH1_MII_RX_CLK ETH1_RGMII_RX_CLK ETH1_RMII_REF_CLK"), + STM32_FUNCTION(12, "QUADSPI_BK1_IO2"), + STM32_FUNCTION(13, "FMC_NE1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(56, "PD8"), + STM32_FUNCTION(0, "GPIOD8"), + STM32_FUNCTION(4, "USART2_TX"), + STM32_FUNCTION(6, "I2S4_WS"), + STM32_FUNCTION(8, "USART3_TX"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(11, "TSC_G1_IO3"), + STM32_FUNCTION(14, "DCMIPP_D9"), + STM32_FUNCTION(15, "DCMIPP_D3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(57, "PD9"), + STM32_FUNCTION(0, "GPIOD9"), + STM32_FUNCTION(1, "TRACECLK"), + STM32_FUNCTION(4, "DFSDM1_DATIN3"), + STM32_FUNCTION(11, "SDMMC2_CDIR"), + STM32_FUNCTION(12, "LCD_B5"), + STM32_FUNCTION(13, "FMC_D14 FMC_AD14"), + STM32_FUNCTION(14, "LCD_CLK"), + STM32_FUNCTION(15, "LCD_B0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(58, "PD10"), + STM32_FUNCTION(0, "GPIOD10"), + STM32_FUNCTION(1, "RTC_REFIN"), + STM32_FUNCTION(5, "I2C5_SMBA"), + STM32_FUNCTION(6, "SPI4_NSS I2S4_WS"), + STM32_FUNCTION(8, "USART3_CK"), + STM32_FUNCTION(10, "LCD_G5"), + STM32_FUNCTION(11, "TSC_G2_IO2"), + STM32_FUNCTION(12, "LCD_B7"), + STM32_FUNCTION(13, "FMC_D15 FMC_AD15"), + STM32_FUNCTION(14, "DCMIPP_VSYNC"), + STM32_FUNCTION(15, "LCD_B2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(59, "PD11"), + STM32_FUNCTION(0, "GPIOD11"), + STM32_FUNCTION(4, "LPTIM2_IN2"), + STM32_FUNCTION(5, "I2C4_SMBA"), + STM32_FUNCTION(8, "USART3_CTS USART3_NSS"), + STM32_FUNCTION(9, "SPDIFRX_IN0"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO2"), + STM32_FUNCTION(11, "ETH2_RGMII_CLK125"), + STM32_FUNCTION(12, "LCD_R7"), + STM32_FUNCTION(13, "FMC_CLE FMC_A16"), + STM32_FUNCTION(14, "UART7_RX"), + STM32_FUNCTION(15, "DCMIPP_D4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(60, "PD12"), + STM32_FUNCTION(0, "GPIOD12"), + STM32_FUNCTION(2, "LPTIM1_IN1"), + STM32_FUNCTION(3, "TIM4_CH1"), + STM32_FUNCTION(6, "I2C1_SCL"), + STM32_FUNCTION(8, "USART3_RTS USART3_DE"), + STM32_FUNCTION(13, "FMC_ALE FMC_A17"), + STM32_FUNCTION(14, "DCMIPP_D6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(61, "PD13"), + STM32_FUNCTION(0, "GPIOD13"), + STM32_FUNCTION(2, "LPTIM2_ETR"), + STM32_FUNCTION(3, "TIM4_CH2"), + STM32_FUNCTION(4, "TIM8_CH2"), + STM32_FUNCTION(5, "SAI1_CK1"), + STM32_FUNCTION(7, "SAI1_MCLK_A"), + STM32_FUNCTION(8, "USART1_RX"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO3"), + STM32_FUNCTION(11, "TSC_G2_IO4"), + STM32_FUNCTION(12, "QUADSPI_BK2_IO2"), + STM32_FUNCTION(13, "FMC_A18"), + STM32_FUNCTION(15, "LCD_G4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(62, "PD14"), + STM32_FUNCTION(0, "GPIOD14"), + STM32_FUNCTION(3, "TIM4_CH3"), + STM32_FUNCTION(5, "I2C3_SDA"), + STM32_FUNCTION(8, "USART1_RX"), + STM32_FUNCTION(9, "UART8_CTS"), + STM32_FUNCTION(13, "FMC_D0 FMC_AD0"), + STM32_FUNCTION(14, "DCMIPP_D8"), + STM32_FUNCTION(15, "LCD_R4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(63, "PD15"), + STM32_FUNCTION(0, "GPIOD15"), + STM32_FUNCTION(2, "USART2_RX"), + STM32_FUNCTION(3, "TIM4_CH4"), + STM32_FUNCTION(4, "DFSDM1_DATIN2"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO3"), + STM32_FUNCTION(13, "FMC_D1 FMC_AD1"), + STM32_FUNCTION(15, "LCD_B5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(64, "PE0"), + STM32_FUNCTION(0, "GPIOE0"), + STM32_FUNCTION(7, "DCMIPP_D12"), + STM32_FUNCTION(9, "UART8_RX"), + STM32_FUNCTION(10, "FDCAN2_RX"), + STM32_FUNCTION(11, "TSC_G4_IO1"), + STM32_FUNCTION(12, "LCD_B1"), + STM32_FUNCTION(13, "FMC_A11"), + STM32_FUNCTION(14, "DCMIPP_D1"), + STM32_FUNCTION(15, "LCD_B5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(65, "PE1"), + STM32_FUNCTION(0, "GPIOE1"), + STM32_FUNCTION(2, "LPTIM1_IN2"), + STM32_FUNCTION(4, "TSC_G2_IO3"), + STM32_FUNCTION(9, "UART8_TX"), + STM32_FUNCTION(10, "LCD_HSYNC"), + STM32_FUNCTION(12, "LCD_R4"), + STM32_FUNCTION(13, "FMC_NBL1"), + STM32_FUNCTION(14, "DCMIPP_D3"), + STM32_FUNCTION(15, "DCMIPP_D12"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(66, "PE2"), + STM32_FUNCTION(0, "GPIOE2"), + STM32_FUNCTION(1, "TRACECLK"), + STM32_FUNCTION(2, "TIM2_ETR"), + STM32_FUNCTION(4, "TSC_G5_IO1"), + STM32_FUNCTION(5, "I2C4_SCL"), + STM32_FUNCTION(6, "SPI5_MOSI"), + STM32_FUNCTION(7, "SAI1_FS_B"), + STM32_FUNCTION(8, "USART6_RTS USART6_DE"), + STM32_FUNCTION(10, "SPDIFRX_IN1"), + STM32_FUNCTION(11, "ETH2_MII_RXD1 ETH2_RGMII_RXD1 ETH2_RMII_RXD1"), + STM32_FUNCTION(13, "FMC_A23"), + STM32_FUNCTION(15, "LCD_R1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(67, "PE3"), + STM32_FUNCTION(0, "GPIOE3"), + STM32_FUNCTION(1, "TRACED11"), + STM32_FUNCTION(3, "SAI2_D4"), + STM32_FUNCTION(5, "TIM15_BKIN"), + STM32_FUNCTION(6, "SPI4_MISO I2S4_SDI"), + STM32_FUNCTION(9, "USART3_RTS USART3_DE"), + STM32_FUNCTION(10, "FDCAN1_RX"), + STM32_FUNCTION(11, "SDMMC2_CK"), + STM32_FUNCTION(14, "LCD_R4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(68, "PE4"), + STM32_FUNCTION(0, "GPIOE4"), + STM32_FUNCTION(2, "SPI5_MISO"), + STM32_FUNCTION(3, "SAI1_D2"), + STM32_FUNCTION(4, "DFSDM1_DATIN3"), + STM32_FUNCTION(5, "TIM15_CH1N"), + STM32_FUNCTION(6, "I2S_CKIN"), + STM32_FUNCTION(7, "SAI1_FS_A"), + STM32_FUNCTION(8, "UART7_RTS UART7_DE"), + STM32_FUNCTION(9, "UART8_TX"), + STM32_FUNCTION(10, "QUADSPI_BK2_NCS"), + STM32_FUNCTION(11, "FMC_NCE2"), + STM32_FUNCTION(12, "TSC_G1_IO1"), + STM32_FUNCTION(13, "FMC_A25"), + STM32_FUNCTION(14, "DCMIPP_D3"), + STM32_FUNCTION(15, "LCD_G7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(69, "PE5"), + STM32_FUNCTION(0, "GPIOE5"), + STM32_FUNCTION(3, "SAI2_SCK_B"), + STM32_FUNCTION(4, "TIM8_CH3"), + STM32_FUNCTION(5, "TIM15_CH1"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(11, "ETH1_MII_TXD3 ETH1_RGMII_TXD3"), + STM32_FUNCTION(13, "FMC_NE1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(70, "PE6"), + STM32_FUNCTION(0, "GPIOE6"), + STM32_FUNCTION(1, "MCO2"), + STM32_FUNCTION(2, "TIM1_BKIN2"), + STM32_FUNCTION(3, "SAI2_SCK_B"), + STM32_FUNCTION(5, "TIM15_CH2"), + STM32_FUNCTION(6, "I2C3_SMBA"), + STM32_FUNCTION(7, "SAI1_SCK_B"), + STM32_FUNCTION(9, "UART4_RTS UART4_DE"), + STM32_FUNCTION(12, "ETH2_MII_TXD3 ETH2_RGMII_TXD3"), + STM32_FUNCTION(13, "FMC_A22"), + STM32_FUNCTION(14, "DCMIPP_D7"), + STM32_FUNCTION(15, "LCD_G3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(71, "PE7"), + STM32_FUNCTION(0, "GPIOE7"), + STM32_FUNCTION(2, "TIM1_ETR"), + STM32_FUNCTION(5, "LPTIM2_IN1"), + STM32_FUNCTION(9, "UART5_TX"), + STM32_FUNCTION(13, "FMC_D4 FMC_AD4"), + STM32_FUNCTION(14, "LCD_B3"), + STM32_FUNCTION(15, "LCD_R5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(72, "PE8"), + STM32_FUNCTION(0, "GPIOE8"), + STM32_FUNCTION(2, "TIM1_CH1N"), + STM32_FUNCTION(4, "DFSDM1_CKIN2"), + STM32_FUNCTION(6, "I2C1_SDA"), + STM32_FUNCTION(8, "UART7_TX"), + STM32_FUNCTION(13, "FMC_D5 FMC_AD5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(73, "PE9"), + STM32_FUNCTION(0, "GPIOE9"), + STM32_FUNCTION(2, "TIM1_CH1"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO1"), + STM32_FUNCTION(12, "LCD_HSYNC"), + STM32_FUNCTION(13, "FMC_D6 FMC_AD6"), + STM32_FUNCTION(14, "DCMIPP_D7"), + STM32_FUNCTION(15, "LCD_R7"), + STM32_FUNCTION(16, "HDP3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(74, "PE10"), + STM32_FUNCTION(0, "GPIOE10"), + STM32_FUNCTION(2, "TIM1_CH2N"), + STM32_FUNCTION(8, "UART7_RX"), + STM32_FUNCTION(10, "FDCAN1_TX"), + STM32_FUNCTION(13, "FMC_D7 FMC_AD7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(75, "PE11"), + STM32_FUNCTION(0, "GPIOE11"), + STM32_FUNCTION(2, "TIM1_CH2"), + STM32_FUNCTION(3, "USART2_CTS USART2_NSS"), + STM32_FUNCTION(5, "SAI1_D2"), + STM32_FUNCTION(6, "SPI4_MOSI I2S4_SDO"), + STM32_FUNCTION(7, "SAI1_FS_A"), + STM32_FUNCTION(8, "USART6_CK"), + STM32_FUNCTION(10, "LCD_R0"), + STM32_FUNCTION(11, "ETH2_MII_TX_ER"), + STM32_FUNCTION(12, "ETH1_MII_TX_ER"), + STM32_FUNCTION(13, "FMC_D8 FMC_AD8"), + STM32_FUNCTION(14, "DCMIPP_D10"), + STM32_FUNCTION(15, "LCD_R5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(76, "PE12"), + STM32_FUNCTION(0, "GPIOE12"), + STM32_FUNCTION(2, "TIM1_CH3N"), + STM32_FUNCTION(6, "SPI4_SCK I2S4_CK"), + STM32_FUNCTION(9, "UART8_RTS UART8_DE"), + STM32_FUNCTION(10, "LCD_VSYNC"), + STM32_FUNCTION(11, "TSC_G3_IO2"), + STM32_FUNCTION(12, "LCD_G4"), + STM32_FUNCTION(13, "FMC_D9 FMC_AD9"), + STM32_FUNCTION(14, "DCMIPP_D11"), + STM32_FUNCTION(15, "LCD_G6"), + STM32_FUNCTION(16, "HDP4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(77, "PE13"), + STM32_FUNCTION(0, "GPIOE13"), + STM32_FUNCTION(2, "TIM1_CH3"), + STM32_FUNCTION(5, "I2C5_SDA"), + STM32_FUNCTION(6, "SPI4_MISO I2S4_SDI"), + STM32_FUNCTION(12, "LCD_B1"), + STM32_FUNCTION(13, "FMC_D10 FMC_AD10"), + STM32_FUNCTION(14, "DCMIPP_D4"), + STM32_FUNCTION(15, "LCD_R6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(78, "PE14"), + STM32_FUNCTION(0, "GPIOE14"), + STM32_FUNCTION(2, "TIM1_BKIN"), + STM32_FUNCTION(5, "SAI1_D4"), + STM32_FUNCTION(9, "UART8_RTS UART8_DE"), + STM32_FUNCTION(10, "QUADSPI_BK1_NCS"), + STM32_FUNCTION(11, "QUADSPI_BK2_IO2"), + STM32_FUNCTION(13, "FMC_D11 FMC_AD11"), + STM32_FUNCTION(14, "DCMIPP_D7"), + STM32_FUNCTION(15, "LCD_G0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(79, "PE15"), + STM32_FUNCTION(0, "GPIOE15"), + STM32_FUNCTION(2, "TIM2_ETR"), + STM32_FUNCTION(3, "TIM1_BKIN"), + STM32_FUNCTION(4, "USART2_CTS USART2_NSS"), + STM32_FUNCTION(7, "I2C4_SCL"), + STM32_FUNCTION(13, "FMC_D12 FMC_AD12"), + STM32_FUNCTION(14, "DCMIPP_D10"), + STM32_FUNCTION(15, "LCD_B7"), + STM32_FUNCTION(16, "HDP7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(80, "PF0"), + STM32_FUNCTION(0, "GPIOF0"), + STM32_FUNCTION(1, "TRACED13"), + STM32_FUNCTION(4, "DFSDM1_CKOUT"), + STM32_FUNCTION(8, "USART3_CK"), + STM32_FUNCTION(11, "SDMMC2_D4"), + STM32_FUNCTION(13, "FMC_A0"), + STM32_FUNCTION(14, "LCD_R6"), + STM32_FUNCTION(15, "LCD_G0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(81, "PF1"), + STM32_FUNCTION(0, "GPIOF1"), + STM32_FUNCTION(1, "TRACED7"), + STM32_FUNCTION(5, "I2C2_SDA"), + STM32_FUNCTION(6, "SPI3_MOSI I2S3_SDO"), + STM32_FUNCTION(13, "FMC_A1"), + STM32_FUNCTION(14, "LCD_B7"), + STM32_FUNCTION(15, "LCD_G1"), + STM32_FUNCTION(16, "HDP7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(82, "PF2"), + STM32_FUNCTION(0, "GPIOF2"), + STM32_FUNCTION(1, "TRACED1"), + STM32_FUNCTION(5, "I2C2_SCL"), + STM32_FUNCTION(7, "DFSDM1_CKIN1"), + STM32_FUNCTION(8, "USART6_CK"), + STM32_FUNCTION(10, "SDMMC2_D0DIR"), + STM32_FUNCTION(12, "SDMMC1_D0DIR"), + STM32_FUNCTION(13, "FMC_A2"), + STM32_FUNCTION(14, "LCD_G4"), + STM32_FUNCTION(15, "LCD_B3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(83, "PF3"), + STM32_FUNCTION(0, "GPIOF3"), + STM32_FUNCTION(4, "LPTIM2_IN2"), + STM32_FUNCTION(5, "I2C5_SDA"), + STM32_FUNCTION(6, "SPI4_MISO I2S4_SDI"), + STM32_FUNCTION(7, "SPI3_NSS I2S3_WS"), + STM32_FUNCTION(13, "FMC_A3"), + STM32_FUNCTION(15, "LCD_G3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(84, "PF4"), + STM32_FUNCTION(0, "GPIOF4"), + STM32_FUNCTION(4, "USART2_RX"), + STM32_FUNCTION(11, "TSC_G3_IO3"), + STM32_FUNCTION(12, "ETH2_MII_RXD0 ETH2_RGMII_RXD0 ETH2_RMII_RXD0"), + STM32_FUNCTION(13, "FMC_A4"), + STM32_FUNCTION(14, "DCMIPP_D4"), + STM32_FUNCTION(15, "LCD_B6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(85, "PF5"), + STM32_FUNCTION(0, "GPIOF5"), + STM32_FUNCTION(1, "TRACED12"), + STM32_FUNCTION(5, "DFSDM1_CKIN0"), + STM32_FUNCTION(6, "I2C1_SMBA"), + STM32_FUNCTION(10, "LCD_G0"), + STM32_FUNCTION(13, "FMC_A5"), + STM32_FUNCTION(14, "DCMIPP_D11"), + STM32_FUNCTION(15, "LCD_R5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(86, "PF6"), + STM32_FUNCTION(0, "GPIOF6"), + STM32_FUNCTION(2, "TIM16_CH1"), + STM32_FUNCTION(6, "SPI5_NSS"), + STM32_FUNCTION(8, "UART7_RX"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO2"), + STM32_FUNCTION(12, "ETH2_MII_TX_EN ETH2_RGMII_TX_CTL ETH2_RMII_TX_EN"), + STM32_FUNCTION(14, "LCD_R7"), + STM32_FUNCTION(15, "LCD_G4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(87, "PF7"), + STM32_FUNCTION(0, "GPIOF7"), + STM32_FUNCTION(2, "TIM17_CH1"), + STM32_FUNCTION(8, "UART7_TX"), + STM32_FUNCTION(9, "UART4_CTS"), + STM32_FUNCTION(11, "ETH1_RGMII_CLK125"), + STM32_FUNCTION(12, "ETH2_MII_TXD0 ETH2_RGMII_TXD0 ETH2_RMII_TXD0"), + STM32_FUNCTION(13, "FMC_A18"), + STM32_FUNCTION(15, "LCD_G2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(88, "PF8"), + STM32_FUNCTION(0, "GPIOF8"), + STM32_FUNCTION(2, "TIM16_CH1N"), + STM32_FUNCTION(3, "TIM4_CH3"), + STM32_FUNCTION(4, "TIM8_CH3"), + STM32_FUNCTION(7, "SAI1_SCK_B"), + STM32_FUNCTION(8, "USART6_TX"), + STM32_FUNCTION(10, "TIM13_CH1"), + STM32_FUNCTION(11, "QUADSPI_BK1_IO0"), + STM32_FUNCTION(14, "DCMIPP_D15"), + STM32_FUNCTION(15, "LCD_B3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(89, "PF9"), + STM32_FUNCTION(0, "GPIOF9"), + STM32_FUNCTION(2, "TIM17_CH1N"), + STM32_FUNCTION(3, "TIM1_CH1"), + STM32_FUNCTION(4, "DFSDM1_CKIN3"), + STM32_FUNCTION(7, "SAI1_D4"), + STM32_FUNCTION(8, "UART7_CTS"), + STM32_FUNCTION(9, "UART8_RX"), + STM32_FUNCTION(10, "TIM14_CH1"), + STM32_FUNCTION(11, "QUADSPI_BK1_IO1"), + STM32_FUNCTION(12, "QUADSPI_BK2_IO3"), + STM32_FUNCTION(13, "FMC_A9"), + STM32_FUNCTION(15, "LCD_B6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(90, "PF10"), + STM32_FUNCTION(0, "GPIOF10"), + STM32_FUNCTION(2, "TIM16_BKIN"), + STM32_FUNCTION(3, "SAI1_D3"), + STM32_FUNCTION(4, "TIM8_BKIN"), + STM32_FUNCTION(6, "SPI5_NSS"), + STM32_FUNCTION(8, "USART6_RTS USART6_DE"), + STM32_FUNCTION(9, "UART7_RTS UART7_DE"), + STM32_FUNCTION(10, "QUADSPI_CLK"), + STM32_FUNCTION(14, "DCMIPP_HSYNC"), + STM32_FUNCTION(15, "LCD_B5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(91, "PF11"), + STM32_FUNCTION(0, "GPIOF11"), + STM32_FUNCTION(2, "USART2_TX"), + STM32_FUNCTION(3, "SAI1_D2"), + STM32_FUNCTION(4, "DFSDM1_CKIN3"), + STM32_FUNCTION(7, "SAI1_FS_A"), + STM32_FUNCTION(13, "ETH2_MII_RX_ER"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(92, "PF12"), + STM32_FUNCTION(0, "GPIOF12"), + STM32_FUNCTION(6, "SPI1_NSS I2S1_WS"), + STM32_FUNCTION(7, "SAI1_SD_A"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(11, "ETH1_MII_TX_ER"), + STM32_FUNCTION(12, "ETH1_RGMII_CLK125"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(93, "PF13"), + STM32_FUNCTION(0, "GPIOF13"), + STM32_FUNCTION(2, "TIM2_ETR"), + STM32_FUNCTION(3, "SAI1_MCLK_B"), + STM32_FUNCTION(7, "DFSDM1_DATIN3"), + STM32_FUNCTION(8, "USART2_TX"), + STM32_FUNCTION(9, "UART5_RX"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(94, "PF14"), + STM32_FUNCTION(0, "GPIOF14"), + STM32_FUNCTION(1, "JTCK SWCLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(95, "PF15"), + STM32_FUNCTION(0, "GPIOF15"), + STM32_FUNCTION(1, "JTMS SWDIO"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(96, "PG0"), + STM32_FUNCTION(0, "GPIOG0"), + STM32_FUNCTION(10, "FDCAN2_TX"), + STM32_FUNCTION(11, "TSC_G4_IO2"), + STM32_FUNCTION(13, "FMC_A10"), + STM32_FUNCTION(14, "DCMIPP_PIXCLK"), + STM32_FUNCTION(15, "LCD_G5"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(97, "PG1"), + STM32_FUNCTION(0, "GPIOG1"), + STM32_FUNCTION(2, "LPTIM1_ETR"), + STM32_FUNCTION(3, "TIM4_ETR"), + STM32_FUNCTION(4, "SAI2_FS_A"), + STM32_FUNCTION(5, "I2C2_SMBA"), + STM32_FUNCTION(6, "SPI2_MISO I2S2_SDI"), + STM32_FUNCTION(7, "SAI2_D2"), + STM32_FUNCTION(10, "FDCAN2_TX"), + STM32_FUNCTION(11, "ETH2_MII_TXD2 ETH2_RGMII_TXD2"), + STM32_FUNCTION(13, "FMC_NBL0"), + STM32_FUNCTION(15, "LCD_G7"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(98, "PG2"), + STM32_FUNCTION(0, "GPIOG2"), + STM32_FUNCTION(2, "MCO2"), + STM32_FUNCTION(4, "TIM8_BKIN"), + STM32_FUNCTION(11, "SAI2_MCLK_B"), + STM32_FUNCTION(12, "ETH1_MDC"), + STM32_FUNCTION(14, "DCMIPP_D1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(99, "PG3"), + STM32_FUNCTION(0, "GPIOG3"), + STM32_FUNCTION(4, "TIM8_BKIN2"), + STM32_FUNCTION(5, "I2C2_SDA"), + STM32_FUNCTION(7, "SAI2_SD_B"), + STM32_FUNCTION(10, "FDCAN2_RX"), + STM32_FUNCTION(11, "ETH2_RGMII_GTX_CLK"), + STM32_FUNCTION(12, "ETH1_MDIO"), + STM32_FUNCTION(13, "FMC_A13"), + STM32_FUNCTION(14, "DCMIPP_D15"), + STM32_FUNCTION(15, "DCMIPP_D12"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(100, "PG4"), + STM32_FUNCTION(0, "GPIOG4"), + STM32_FUNCTION(1, "TRACED1"), + STM32_FUNCTION(2, "TIM1_BKIN2"), + STM32_FUNCTION(5, "DFSDM1_CKIN3"), + STM32_FUNCTION(9, "USART3_RX"), + STM32_FUNCTION(11, "SDMMC2_D123DIR"), + STM32_FUNCTION(12, "LCD_VSYNC"), + STM32_FUNCTION(13, "FMC_A14"), + STM32_FUNCTION(14, "DCMIPP_D8"), + STM32_FUNCTION(15, "DCMIPP_D13"), + STM32_FUNCTION(16, "HDP1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(101, "PG5"), + STM32_FUNCTION(0, "GPIOG5"), + STM32_FUNCTION(2, "TIM17_CH1"), + STM32_FUNCTION(11, "ETH2_MDC"), + STM32_FUNCTION(12, "LCD_G4"), + STM32_FUNCTION(13, "FMC_A15"), + STM32_FUNCTION(14, "DCMIPP_VSYNC"), + STM32_FUNCTION(15, "DCMIPP_D3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(102, "PG6"), + STM32_FUNCTION(0, "GPIOG6"), + STM32_FUNCTION(1, "TRACED3"), + STM32_FUNCTION(2, "TIM17_BKIN"), + STM32_FUNCTION(3, "TIM5_CH4"), + STM32_FUNCTION(4, "SAI2_D1"), + STM32_FUNCTION(5, "USART1_RX"), + STM32_FUNCTION(7, "SAI2_SD_A"), + STM32_FUNCTION(11, "SDMMC2_CMD"), + STM32_FUNCTION(12, "LCD_G0"), + STM32_FUNCTION(14, "LCD_DE"), + STM32_FUNCTION(15, "LCD_R7"), + STM32_FUNCTION(16, "HDP3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(103, "PG7"), + STM32_FUNCTION(0, "GPIOG7"), + STM32_FUNCTION(1, "TRACED8"), + STM32_FUNCTION(2, "TIM1_ETR"), + STM32_FUNCTION(6, "SPI3_MISO I2S3_SDI"), + STM32_FUNCTION(9, "UART7_CTS"), + STM32_FUNCTION(11, "SDMMC2_CKIN"), + STM32_FUNCTION(12, "LCD_R1"), + STM32_FUNCTION(14, "LCD_R5"), + STM32_FUNCTION(15, "LCD_R2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(104, "PG8"), + STM32_FUNCTION(0, "GPIOG8"), + STM32_FUNCTION(2, "TIM2_CH1"), + STM32_FUNCTION(4, "TIM8_ETR"), + STM32_FUNCTION(6, "SPI5_MISO"), + STM32_FUNCTION(7, "SAI1_MCLK_B"), + STM32_FUNCTION(8, "LCD_B1"), + STM32_FUNCTION(9, "USART3_RTS USART3_DE"), + STM32_FUNCTION(10, "SPDIFRX_IN2"), + STM32_FUNCTION(11, "QUADSPI_BK2_IO2"), + STM32_FUNCTION(12, "QUADSPI_BK1_IO3"), + STM32_FUNCTION(13, "FMC_NE2"), + STM32_FUNCTION(14, "ETH2_CLK"), + STM32_FUNCTION(15, "DCMIPP_D6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(105, "PG9"), + STM32_FUNCTION(0, "GPIOG9"), + STM32_FUNCTION(1, "DBTRGO"), + STM32_FUNCTION(5, "I2C2_SDA"), + STM32_FUNCTION(8, "USART6_RX"), + STM32_FUNCTION(9, "SPDIFRX_IN3"), + STM32_FUNCTION(10, "FDCAN1_RX"), + STM32_FUNCTION(11, "FMC_NE2"), + STM32_FUNCTION(13, "FMC_NCE"), + STM32_FUNCTION(14, "DCMIPP_VSYNC"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(106, "PG10"), + STM32_FUNCTION(0, "GPIOG10"), + STM32_FUNCTION(6, "SPI5_SCK"), + STM32_FUNCTION(7, "SAI1_SD_B"), + STM32_FUNCTION(9, "UART8_CTS"), + STM32_FUNCTION(10, "FDCAN1_TX"), + STM32_FUNCTION(11, "QUADSPI_BK2_IO1"), + STM32_FUNCTION(13, "FMC_NE3"), + STM32_FUNCTION(14, "DCMIPP_D2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(107, "PG11"), + STM32_FUNCTION(0, "GPIOG11"), + STM32_FUNCTION(5, "SAI2_D3"), + STM32_FUNCTION(6, "I2S2_MCK"), + STM32_FUNCTION(8, "USART3_TX"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(11, "ETH2_MII_TXD1 ETH2_RGMII_TXD1 ETH2_RMII_TXD1"), + STM32_FUNCTION(13, "FMC_A24"), + STM32_FUNCTION(14, "DCMIPP_D14"), + STM32_FUNCTION(15, "LCD_B2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(108, "PG12"), + STM32_FUNCTION(0, "GPIOG12"), + STM32_FUNCTION(2, "LPTIM1_IN1"), + STM32_FUNCTION(4, "TSC_G5_IO2"), + STM32_FUNCTION(5, "SAI2_SCK_A"), + STM32_FUNCTION(7, "SAI2_CK2"), + STM32_FUNCTION(8, "USART6_RTS USART6_DE"), + STM32_FUNCTION(9, "USART3_CTS"), + STM32_FUNCTION(11, "ETH2_PHY_INTN"), + STM32_FUNCTION(12, "ETH1_PHY_INTN"), + STM32_FUNCTION(13, "ETH2_MII_RX_DV ETH2_RGMII_RX_CTL ETH2_RMII_CRS_DV"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(109, "PG13"), + STM32_FUNCTION(0, "GPIOG13"), + STM32_FUNCTION(2, "LPTIM1_OUT"), + STM32_FUNCTION(8, "USART6_CTS USART6_NSS"), + STM32_FUNCTION(12, "ETH1_MII_TXD0 ETH1_RGMII_TXD0 ETH1_RMII_TXD0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(110, "PG14"), + STM32_FUNCTION(0, "GPIOG14"), + STM32_FUNCTION(2, "LPTIM1_ETR"), + STM32_FUNCTION(7, "SAI2_D1"), + STM32_FUNCTION(8, "USART6_TX"), + STM32_FUNCTION(11, "SAI2_SD_A"), + STM32_FUNCTION(12, "ETH1_MII_TXD1 ETH1_RGMII_TXD1 ETH1_RMII_TXD1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(111, "PG15"), + STM32_FUNCTION(0, "GPIOG15"), + STM32_FUNCTION(8, "USART6_CTS USART6_NSS"), + STM32_FUNCTION(9, "UART7_CTS"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO1"), + STM32_FUNCTION(11, "ETH2_PHY_INTN"), + STM32_FUNCTION(12, "LCD_B4"), + STM32_FUNCTION(14, "DCMIPP_D10"), + STM32_FUNCTION(15, "LCD_B3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(112, "PH0"), + STM32_FUNCTION(0, "GPIOH0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(113, "PH1"), + STM32_FUNCTION(0, "GPIOH1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(114, "PH2"), + STM32_FUNCTION(0, "GPIOH2"), + STM32_FUNCTION(2, "LPTIM1_IN2"), + STM32_FUNCTION(4, "TSC_G4_IO3"), + STM32_FUNCTION(7, "DCMIPP_D9"), + STM32_FUNCTION(8, "LCD_G1"), + STM32_FUNCTION(9, "UART7_TX"), + STM32_FUNCTION(10, "QUADSPI_BK2_IO0"), + STM32_FUNCTION(11, "ETH2_MII_CRS"), + STM32_FUNCTION(12, "ETH1_MII_CRS"), + STM32_FUNCTION(13, "FMC_NE4"), + STM32_FUNCTION(14, "ETH2_RGMII_CLK125"), + STM32_FUNCTION(15, "LCD_B0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(115, "PH3"), + STM32_FUNCTION(0, "GPIOH3"), + STM32_FUNCTION(5, "I2C3_SCL"), + STM32_FUNCTION(6, "SPI5_MOSI"), + STM32_FUNCTION(10, "QUADSPI_BK2_IO1"), + STM32_FUNCTION(11, "ETH1_MII_COL"), + STM32_FUNCTION(12, "LCD_R5"), + STM32_FUNCTION(13, "ETH2_MII_COL"), + STM32_FUNCTION(14, "QUADSPI_BK1_IO0"), + STM32_FUNCTION(15, "LCD_B4"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(116, "PH4"), + STM32_FUNCTION(0, "GPIOH4"), + STM32_FUNCTION(1, "JTDI"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(117, "PH5"), + STM32_FUNCTION(0, "GPIOH5"), + STM32_FUNCTION(1, "JTDO"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(118, "PH6"), + STM32_FUNCTION(0, "GPIOH6"), + STM32_FUNCTION(3, "TIM12_CH1"), + STM32_FUNCTION(4, "USART2_CK"), + STM32_FUNCTION(5, "I2C5_SDA"), + STM32_FUNCTION(6, "SPI2_SCK I2S2_CK"), + STM32_FUNCTION(10, "QUADSPI_BK1_IO2"), + STM32_FUNCTION(11, "ETH1_PHY_INTN"), + STM32_FUNCTION(12, "ETH1_MII_RX_ER"), + STM32_FUNCTION(13, "ETH2_MII_RXD2 ETH2_RGMII_RXD2"), + STM32_FUNCTION(14, "QUADSPI_BK1_NCS"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(119, "PH7"), + STM32_FUNCTION(0, "GPIOH7"), + STM32_FUNCTION(3, "SAI2_FS_B"), + STM32_FUNCTION(6, "I2C3_SDA"), + STM32_FUNCTION(7, "SPI5_SCK"), + STM32_FUNCTION(10, "QUADSPI_BK2_IO3"), + STM32_FUNCTION(11, "ETH2_MII_TX_CLK"), + STM32_FUNCTION(12, "ETH1_MII_TX_CLK"), + STM32_FUNCTION(14, "QUADSPI_BK1_IO3"), + STM32_FUNCTION(15, "LCD_B2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(120, "PH8"), + STM32_FUNCTION(0, "GPIOH8"), + STM32_FUNCTION(1, "TRACED9"), + STM32_FUNCTION(3, "TIM5_ETR"), + STM32_FUNCTION(4, "USART2_RX"), + STM32_FUNCTION(5, "I2C3_SDA"), + STM32_FUNCTION(12, "LCD_R6"), + STM32_FUNCTION(13, "FMC_A8"), + STM32_FUNCTION(14, "DCMIPP_HSYNC"), + STM32_FUNCTION(15, "LCD_R2"), + STM32_FUNCTION(16, "HDP2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(121, "PH9"), + STM32_FUNCTION(0, "GPIOH9"), + STM32_FUNCTION(2, "TIM1_CH4"), + STM32_FUNCTION(3, "TIM12_CH2"), + STM32_FUNCTION(4, "TSC_SYNC"), + STM32_FUNCTION(6, "SPI4_SCK I2S4_CK"), + STM32_FUNCTION(7, "DCMIPP_D13"), + STM32_FUNCTION(10, "LCD_B5"), + STM32_FUNCTION(12, "LCD_DE"), + STM32_FUNCTION(13, "FMC_A20"), + STM32_FUNCTION(14, "DCMIPP_D9"), + STM32_FUNCTION(15, "DCMIPP_D8"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(122, "PH10"), + STM32_FUNCTION(0, "GPIOH10"), + STM32_FUNCTION(1, "TRACED0"), + STM32_FUNCTION(3, "TIM5_CH1"), + STM32_FUNCTION(4, "SAI2_D3"), + STM32_FUNCTION(5, "DFSDM1_DATIN2"), + STM32_FUNCTION(6, "I2S3_MCK"), + STM32_FUNCTION(7, "SPI2_MOSI I2S2_SDO"), + STM32_FUNCTION(8, "USART3_CTS USART3_NSS"), + STM32_FUNCTION(9, "SDMMC1_D4"), + STM32_FUNCTION(14, "LCD_HSYNC"), + STM32_FUNCTION(15, "LCD_R2"), + STM32_FUNCTION(16, "HDP0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(123, "PH11"), + STM32_FUNCTION(0, "GPIOH11"), + STM32_FUNCTION(2, "SPI5_NSS"), + STM32_FUNCTION(3, "TIM5_CH2"), + STM32_FUNCTION(4, "SAI2_SD_A"), + STM32_FUNCTION(6, "SPI2_NSS I2S2_WS"), + STM32_FUNCTION(7, "I2C4_SCL"), + STM32_FUNCTION(8, "USART6_RX"), + STM32_FUNCTION(10, "QUADSPI_BK2_IO0"), + STM32_FUNCTION(12, "ETH2_MII_RX_CLK ETH2_RGMII_RX_CLK ETH2_RMII_REF_CLK"), + STM32_FUNCTION(13, "FMC_A12"), + STM32_FUNCTION(15, "LCD_G6"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(124, "PH12"), + STM32_FUNCTION(0, "GPIOH12"), + STM32_FUNCTION(2, "USART2_TX"), + STM32_FUNCTION(3, "TIM5_CH3"), + STM32_FUNCTION(4, "DFSDM1_CKIN1"), + STM32_FUNCTION(5, "I2C3_SCL"), + STM32_FUNCTION(6, "SPI5_MOSI"), + STM32_FUNCTION(7, "SAI1_SCK_A"), + STM32_FUNCTION(10, "QUADSPI_BK2_IO2"), + STM32_FUNCTION(11, "SAI1_CK2"), + STM32_FUNCTION(12, "ETH1_MII_CRS"), + STM32_FUNCTION(13, "FMC_A6"), + STM32_FUNCTION(14, "DCMIPP_D3"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(125, "PH13"), + STM32_FUNCTION(0, "GPIOH13"), + STM32_FUNCTION(1, "TRACED15"), + STM32_FUNCTION(3, "USART2_CK"), + STM32_FUNCTION(4, "TIM8_CH1N"), + STM32_FUNCTION(5, "I2C5_SCL"), + STM32_FUNCTION(7, "SPI3_SCK I2S3_CK"), + STM32_FUNCTION(9, "UART4_TX"), + STM32_FUNCTION(14, "LCD_G3"), + STM32_FUNCTION(15, "LCD_G2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(126, "PH14"), + STM32_FUNCTION(0, "GPIOH14"), + STM32_FUNCTION(4, "DFSDM1_DATIN2"), + STM32_FUNCTION(5, "I2C3_SDA"), + STM32_FUNCTION(7, "DCMIPP_D8"), + STM32_FUNCTION(9, "UART4_RX"), + STM32_FUNCTION(12, "LCD_B4"), + STM32_FUNCTION(14, "DCMIPP_D2"), + STM32_FUNCTION(15, "DCMIPP_PIXCLK"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(128, "PI0"), + STM32_FUNCTION(0, "GPIOI0"), + STM32_FUNCTION(9, "SPDIFRX_IN0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(129, "PI1"), + STM32_FUNCTION(0, "GPIOI1"), + STM32_FUNCTION(9, "SPDIFRX_IN1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(130, "PI2"), + STM32_FUNCTION(0, "GPIOI2"), + STM32_FUNCTION(9, "SPDIFRX_IN2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(131, "PI3"), + STM32_FUNCTION(0, "GPIOI3"), + STM32_FUNCTION(9, "SPDIFRX_IN3"), + STM32_FUNCTION(12, "ETH1_MII_RX_ER"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(132, "PI4"), + STM32_FUNCTION(0, "GPIOI4"), + STM32_FUNCTION(1, "BOOT0"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(133, "PI5"), + STM32_FUNCTION(0, "GPIOI5"), + STM32_FUNCTION(1, "BOOT1"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(134, "PI6"), + STM32_FUNCTION(0, "GPIOI6"), + STM32_FUNCTION(1, "BOOT2"), + STM32_FUNCTION(17, "ANALOG") + ), + STM32_PIN( + PINCTRL_PIN(135, "PI7"), + STM32_FUNCTION(0, "GPIOI7"), + STM32_FUNCTION(17, "ANALOG") + ), +}; + +static struct stm32_pinctrl_match_data stm32mp135_match_data = { + .pins = stm32mp135_pins, + .npins = ARRAY_SIZE(stm32mp135_pins), +}; + +static const struct of_device_id stm32mp135_pctrl_match[] = { + { + .compatible = "st,stm32mp135-pinctrl", + .data = &stm32mp135_match_data, + }, + { } +}; + +static const struct dev_pm_ops stm32_pinctrl_dev_pm_ops = { + SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, stm32_pinctrl_resume) +}; + +static struct platform_driver stm32mp135_pinctrl_driver = { + .probe = stm32_pctl_probe, + .driver = { + .name = "stm32mp135-pinctrl", + .of_match_table = stm32mp135_pctrl_match, + .pm = &stm32_pinctrl_dev_pm_ops, + }, +}; + +static int __init stm32mp135_pinctrl_init(void) +{ + return platform_driver_register(&stm32mp135_pinctrl_driver); +} +arch_initcall(stm32mp135_pinctrl_init); diff --git a/arch/arm/boot/dts/mt8135-pinfunc.h b/include/dt-bindings/pinctrl/mt8135-pinfunc.h index ce0cb5a440eb..ce0cb5a440eb 100644 --- a/arch/arm/boot/dts/mt8135-pinfunc.h +++ b/include/dt-bindings/pinctrl/mt8135-pinfunc.h diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h b/include/dt-bindings/pinctrl/mt8183-pinfunc.h index 6221cd712718..6221cd712718 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183-pinfunc.h +++ b/include/dt-bindings/pinctrl/mt8183-pinfunc.h diff --git a/include/dt-bindings/pinctrl/pinctrl-zynq.h b/include/dt-bindings/pinctrl/pinctrl-zynq.h new file mode 100644 index 000000000000..bbfc345f017d --- /dev/null +++ b/include/dt-bindings/pinctrl/pinctrl-zynq.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * MIO pin configuration defines for Xilinx Zynq + * + * Copyright (C) 2021 Xilinx, Inc. + */ + +#ifndef _DT_BINDINGS_PINCTRL_ZYNQ_H +#define _DT_BINDINGS_PINCTRL_ZYNQ_H + +/* Configuration options for different power supplies */ +#define IO_STANDARD_LVCMOS18 1 +#define IO_STANDARD_LVCMOS25 2 +#define IO_STANDARD_LVCMOS33 3 +#define IO_STANDARD_HSTL 4 + +#endif /* _DT_BINDINGS_PINCTRL_ZYNQ_H */ diff --git a/include/dt-bindings/pinctrl/rzg2l-pinctrl.h b/include/dt-bindings/pinctrl/rzg2l-pinctrl.h new file mode 100644 index 000000000000..b48f8c7a5556 --- /dev/null +++ b/include/dt-bindings/pinctrl/rzg2l-pinctrl.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * This header provides constants for Renesas RZ/G2L family pinctrl bindings. + * + * Copyright (C) 2021 Renesas Electronics Corp. + * + */ + +#ifndef __DT_BINDINGS_RZG2L_PINCTRL_H +#define __DT_BINDINGS_RZG2L_PINCTRL_H + +#define RZG2L_PINS_PER_PORT 8 + +/* + * Create the pin index from its bank and position numbers and store in + * the upper 16 bits the alternate function identifier + */ +#define RZG2L_PORT_PINMUX(b, p, f) ((b) * RZG2L_PINS_PER_PORT + (p) | ((f) << 16)) + +/* Convert a port and pin label to its global pin index */ + #define RZG2L_GPIO(port, pin) ((port) * RZG2L_PINS_PER_PORT + (pin)) + +#endif /* __DT_BINDINGS_RZG2L_PINCTRL_H */ |