summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-10-14 21:37:50 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2016-10-14 21:37:50 +0300
commitb56061b04e0264f3b24f7450a3d5790437bb912a (patch)
tree0ff9b43c01d712f4d86585434bc1f3f0af4c2239
parent496063426dece3f47e21f9f3387205d6ca03bd2a (diff)
parent5404fb7cec7473413bc1dd2d114dbe7c291dfb15 (diff)
downloadlinux-b56061b04e0264f3b24f7450a3d5790437bb912a.tar.xz
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley: "This is just a set of minor updates and fixes which weren't quite ready in time for the first pull request. The only real thing of note is Mike Christie is stepping down as Maintainer of iscsi to be replaced by Lee Duncan and Chris Leech" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: Kconfig fix scsi: g_NCR5380: Stop using scsi_module.c scsi: g_NCR5380: Reduce overrides[] from array to struct scsi: g_NCR5380: Remove deprecated __setup scsi: ufs: Fix error return code in ufshcd_init() scsi: ufs: Data Segment only needed for WRITE DESCRIPTOR scsi: cxgb4i: Set completion bit in work request MAINTAINERS: Update open-iscsi maintainers scsi: ufs: Enable no vccq quirk for skhynix device scsi: be2iscsi: mark symbols static where possible
-rw-r--r--Documentation/scsi/g_NCR5380.txt34
-rw-r--r--MAINTAINERS6
-rw-r--r--drivers/scsi/be2iscsi/be_main.c12
-rw-r--r--drivers/scsi/cxgbi/cxgb4i/cxgb4i.c5
-rw-r--r--drivers/scsi/g_NCR5380.c699
-rw-r--r--drivers/scsi/g_NCR5380.h8
-rw-r--r--drivers/scsi/ufs/Kconfig2
-rw-r--r--drivers/scsi/ufs/ufs_quirks.h2
-rw-r--r--drivers/scsi/ufs/ufshcd.c10
9 files changed, 345 insertions, 433 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt
index fd880150aeea..e2c187947e58 100644
--- a/Documentation/scsi/g_NCR5380.txt
+++ b/Documentation/scsi/g_NCR5380.txt
@@ -21,16 +21,6 @@ NCR53c400 card, the Trantor T130B in its default configuration:
The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
supported by the driver.
-If the default configuration does not work for you, you can use the kernel
-command lines (eg using the lilo append command):
- ncr5380=addr,irq
- ncr53c400=addr,irq
- ncr53c400a=addr,irq
- dtc3181e=addr,irq
-
-The driver does not probe for any addresses or ports other than those in
-the OVERRIDE or given to the kernel as above.
-
This driver provides some information on what it has detected in
/proc/scsi/g_NCR5380/x where x is the scsi card number as detected at boot
time. More info to come in the future.
@@ -38,6 +28,16 @@ time. More info to come in the future.
This driver works as a module.
When included as a module, parameters can be passed on the insmod/modprobe
command line:
+ irq=xx[,...] the interrupt(s)
+ base=xx[,...] the port or base address(es) (for port or memory mapped, resp.)
+ card=xx[,...] card type(s):
+ 0 = NCR5380,
+ 1 = NCR53C400,
+ 2 = NCR53C400A,
+ 3 = Domex Technology Corp 3181E (DTC3181E)
+ 4 = Hewlett Packard C2502
+
+These old-style parameters can support only one card:
ncr_irq=xx the interrupt
ncr_addr=xx the port or base address (for port or memory
mapped, resp.)
@@ -46,11 +46,19 @@ command line:
ncr_53c400a=1 to set up for a NCR53C400A board
dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
hp_c2502=1 to set up for a Hewlett Packard C2502 board
+
e.g.
-modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
+NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0
for a port mapped NCR5380 board or
-modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
- for a memory mapped NCR53C400 board with interrupts disabled.
+
+OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
+NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1
+ for a memory mapped NCR53C400 board with interrupts disabled or
+
+NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
+ for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ
+ and HP C2502 at 0x300 with IRQ 7
(255 should be specified for no or DMA interrupt, 254 to autoprobe for an
IRQ line if overridden on the command line.)
diff --git a/MAINTAINERS b/MAINTAINERS
index a5ae0f21a8cb..fc849cabf99e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6620,10 +6620,10 @@ S: Maintained
F: drivers/firmware/iscsi_ibft*
ISCSI
-M: Mike Christie <michaelc@cs.wisc.edu>
+M: Lee Duncan <lduncan@suse.com>
+M: Chris Leech <cleech@redhat.com>
L: open-iscsi@googlegroups.com
-W: www.open-iscsi.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
+W: www.open-iscsi.com
S: Maintained
F: drivers/scsi/*iscsi*
F: include/scsi/*iscsi*
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 6a6906f847db..68138a647dfc 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -61,7 +61,7 @@ MODULE_PARM_DESC(be_max_phys_size,
"memory that can be allocated. Range is 16 - 128");
#define beiscsi_disp_param(_name)\
-ssize_t \
+static ssize_t \
beiscsi_##_name##_disp(struct device *dev,\
struct device_attribute *attrib, char *buf) \
{ \
@@ -74,7 +74,7 @@ beiscsi_##_name##_disp(struct device *dev,\
}
#define beiscsi_change_param(_name, _minval, _maxval, _defaval)\
-int \
+static int \
beiscsi_##_name##_change(struct beiscsi_hba *phba, uint32_t val)\
{\
if (val >= _minval && val <= _maxval) {\
@@ -93,7 +93,7 @@ beiscsi_##_name##_change(struct beiscsi_hba *phba, uint32_t val)\
}
#define beiscsi_store_param(_name) \
-ssize_t \
+static ssize_t \
beiscsi_##_name##_store(struct device *dev,\
struct device_attribute *attr, const char *buf,\
size_t count) \
@@ -112,7 +112,7 @@ beiscsi_##_name##_store(struct device *dev,\
}
#define beiscsi_init_param(_name, _minval, _maxval, _defval) \
-int \
+static int \
beiscsi_##_name##_init(struct beiscsi_hba *phba, uint32_t val) \
{ \
if (val >= _minval && val <= _maxval) {\
@@ -4584,7 +4584,7 @@ free_hndls:
io_task->cmd_bhs = NULL;
return -ENOMEM;
}
-int beiscsi_iotask_v2(struct iscsi_task *task, struct scatterlist *sg,
+static int beiscsi_iotask_v2(struct iscsi_task *task, struct scatterlist *sg,
unsigned int num_sg, unsigned int xferlen,
unsigned int writedir)
{
@@ -4973,7 +4973,7 @@ static int beiscsi_bsg_request(struct bsg_job *job)
return rc;
}
-void beiscsi_hba_attrs_init(struct beiscsi_hba *phba)
+static void beiscsi_hba_attrs_init(struct beiscsi_hba *phba)
{
/* Set the logging parameter */
beiscsi_log_enable_init(phba, beiscsi_log_enable);
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 7c0d7af0d3b7..0039bebaa9e2 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -685,6 +685,11 @@ static int push_tx_frames(struct cxgbi_sock *csk, int req_completion)
req_completion);
csk->snd_nxt += len;
cxgbi_skcb_clear_flag(skb, SKCBF_TX_NEED_HDR);
+ } else if (cxgbi_skcb_test_flag(skb, SKCBF_TX_FLAG_COMPL) &&
+ (csk->wr_una_cred >= (csk->wr_max_cred / 2))) {
+ struct cpl_close_con_req *req =
+ (struct cpl_close_con_req *)skb->data;
+ req->wr.wr_hi |= htonl(FW_WR_COMPL_F);
}
total_size += skb->truesize;
t4_set_arp_err_handler(skb, csk, arp_failure_skb_discard);
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 516bd6c4f442..cbf010324c18 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -30,161 +30,41 @@
#include "NCR5380.h"
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/isapnp.h>
+#include <linux/isa.h>
+#include <linux/pnp.h>
#include <linux/interrupt.h>
+#define MAX_CARDS 8
+
+/* old-style parameters for compatibility */
static int ncr_irq;
-static int ncr_dma;
static int ncr_addr;
static int ncr_5380;
static int ncr_53c400;
static int ncr_53c400a;
static int dtc_3181e;
static int hp_c2502;
+module_param(ncr_irq, int, 0);
+module_param(ncr_addr, int, 0);
+module_param(ncr_5380, int, 0);
+module_param(ncr_53c400, int, 0);
+module_param(ncr_53c400a, int, 0);
+module_param(dtc_3181e, int, 0);
+module_param(hp_c2502, int, 0);
-static struct override {
- NCR5380_map_type NCR5380_map_name;
- int irq;
- int dma;
- int board; /* Use NCR53c400, Ricoh, etc. extensions ? */
-} overrides
-#ifdef GENERIC_NCR5380_OVERRIDE
-[] __initdata = GENERIC_NCR5380_OVERRIDE;
-#else
-[1] __initdata = { { 0,},};
-#endif
-
-#define NO_OVERRIDES ARRAY_SIZE(overrides)
-
-#ifndef MODULE
-
-/**
- * internal_setup - handle lilo command string override
- * @board: BOARD_* identifier for the board
- * @str: unused
- * @ints: numeric parameters
- *
- * Do LILO command line initialization of the overrides array. Display
- * errors when needed
- *
- * Locks: none
- */
-
-static void __init internal_setup(int board, char *str, int *ints)
-{
- static int commandline_current;
- switch (board) {
- case BOARD_NCR5380:
- if (ints[0] != 2 && ints[0] != 3) {
- printk(KERN_ERR "generic_NCR5380_setup : usage ncr5380=" STRVAL(NCR5380_map_name) ",irq,dma\n");
- return;
- }
- break;
- case BOARD_NCR53C400:
- if (ints[0] != 2) {
- printk(KERN_ERR "generic_NCR53C400_setup : usage ncr53c400=" STRVAL(NCR5380_map_name) ",irq\n");
- return;
- }
- break;
- case BOARD_NCR53C400A:
- if (ints[0] != 2) {
- printk(KERN_ERR "generic_NCR53C400A_setup : usage ncr53c400a=" STRVAL(NCR5380_map_name) ",irq\n");
- return;
- }
- break;
- case BOARD_DTC3181E:
- if (ints[0] != 2) {
- printk("generic_DTC3181E_setup : usage dtc3181e=" STRVAL(NCR5380_map_name) ",irq\n");
- return;
- }
- break;
- }
-
- if (commandline_current < NO_OVERRIDES) {
- overrides[commandline_current].NCR5380_map_name = (NCR5380_map_type) ints[1];
- overrides[commandline_current].irq = ints[2];
- if (ints[0] == 3)
- overrides[commandline_current].dma = ints[3];
- else
- overrides[commandline_current].dma = DMA_NONE;
- overrides[commandline_current].board = board;
- ++commandline_current;
- }
-}
-
-
-/**
- * do_NCR53C80_setup - set up entry point
- * @str: unused
- *
- * Setup function invoked at boot to parse the ncr5380= command
- * line.
- */
-
-static int __init do_NCR5380_setup(char *str)
-{
- int ints[10];
-
- get_options(str, ARRAY_SIZE(ints), ints);
- internal_setup(BOARD_NCR5380, str, ints);
- return 1;
-}
-
-/**
- * do_NCR53C400_setup - set up entry point
- * @str: unused
- * @ints: integer parameters from kernel setup code
- *
- * Setup function invoked at boot to parse the ncr53c400= command
- * line.
- */
-
-static int __init do_NCR53C400_setup(char *str)
-{
- int ints[10];
-
- get_options(str, ARRAY_SIZE(ints), ints);
- internal_setup(BOARD_NCR53C400, str, ints);
- return 1;
-}
-
-/**
- * do_NCR53C400A_setup - set up entry point
- * @str: unused
- * @ints: integer parameters from kernel setup code
- *
- * Setup function invoked at boot to parse the ncr53c400a= command
- * line.
- */
-
-static int __init do_NCR53C400A_setup(char *str)
-{
- int ints[10];
-
- get_options(str, ARRAY_SIZE(ints), ints);
- internal_setup(BOARD_NCR53C400A, str, ints);
- return 1;
-}
-
-/**
- * do_DTC3181E_setup - set up entry point
- * @str: unused
- * @ints: integer parameters from kernel setup code
- *
- * Setup function invoked at boot to parse the dtc3181e= command
- * line.
- */
+static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "IRQ number(s)");
-static int __init do_DTC3181E_setup(char *str)
-{
- int ints[10];
+static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+module_param_array(base, int, NULL, 0);
+MODULE_PARM_DESC(base, "base address(es)");
- get_options(str, ARRAY_SIZE(ints), ints);
- internal_setup(BOARD_DTC3181E, str, ints);
- return 1;
-}
+static int card[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
+module_param_array(card, int, NULL, 0);
+MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC3181E, 4=HP C2502)");
-#endif
+MODULE_LICENSE("GPL");
#ifndef SCSI_G_NCR5380_MEM
/*
@@ -210,21 +90,9 @@ static void magic_configure(int idx, u8 irq, u8 magic[])
}
#endif
-/**
- * generic_NCR5380_detect - look for NCR5380 controllers
- * @tpnt: the scsi template
- *
- * Scan for the present of NCR5380, NCR53C400, NCR53C400A, DTC3181E
- * and DTC436(ISAPnP) controllers. If overrides have been set we use
- * them.
- *
- * Locks: none
- */
-
-static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
+static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
+ struct device *pdev, int base, int irq, int board)
{
- static int current_override;
- int count;
unsigned int *ports;
u8 *magic = NULL;
#ifndef SCSI_G_NCR5380_MEM
@@ -232,272 +100,222 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
int port_idx = -1;
unsigned long region_size;
#endif
- static unsigned int __initdata ncr_53c400a_ports[] = {
+ static unsigned int ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
- static unsigned int __initdata dtc_3181e_ports[] = {
+ static unsigned int dtc_3181e_ports[] = {
0x220, 0x240, 0x280, 0x2a0, 0x2c0, 0x300, 0x320, 0x340, 0
};
- static u8 ncr_53c400a_magic[] __initdata = { /* 53C400A & DTC436 */
+ static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */
0x59, 0xb9, 0xc5, 0xae, 0xa6
};
- static u8 hp_c2502_magic[] __initdata = { /* HP C2502 */
+ static u8 hp_c2502_magic[] = { /* HP C2502 */
0x0f, 0x22, 0xf0, 0x20, 0x80
};
- int flags;
+ int flags, ret;
struct Scsi_Host *instance;
struct NCR5380_hostdata *hostdata;
#ifdef SCSI_G_NCR5380_MEM
- unsigned long base;
void __iomem *iomem;
resource_size_t iomem_size;
#endif
- if (ncr_irq)
- overrides[0].irq = ncr_irq;
- if (ncr_dma)
- overrides[0].dma = ncr_dma;
- if (ncr_addr)
- overrides[0].NCR5380_map_name = (NCR5380_map_type) ncr_addr;
- if (ncr_5380)
- overrides[0].board = BOARD_NCR5380;
- else if (ncr_53c400)
- overrides[0].board = BOARD_NCR53C400;
- else if (ncr_53c400a)
- overrides[0].board = BOARD_NCR53C400A;
- else if (dtc_3181e)
- overrides[0].board = BOARD_DTC3181E;
- else if (hp_c2502)
- overrides[0].board = BOARD_HP_C2502;
-#ifndef SCSI_G_NCR5380_MEM
- if (!current_override && isapnp_present()) {
- struct pnp_dev *dev = NULL;
- count = 0;
- while ((dev = pnp_find_dev(NULL, ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e), dev))) {
- if (count >= NO_OVERRIDES)
- break;
- if (pnp_device_attach(dev) < 0)
- continue;
- if (pnp_activate_dev(dev) < 0) {
- printk(KERN_ERR "dtc436e probe: activate failed\n");
- pnp_device_detach(dev);
- continue;
- }
- if (!pnp_port_valid(dev, 0)) {
- printk(KERN_ERR "dtc436e probe: no valid port\n");
- pnp_device_detach(dev);
- continue;
- }
- if (pnp_irq_valid(dev, 0))
- overrides[count].irq = pnp_irq(dev, 0);
- else
- overrides[count].irq = NO_IRQ;
- if (pnp_dma_valid(dev, 0))
- overrides[count].dma = pnp_dma(dev, 0);
- else
- overrides[count].dma = DMA_NONE;
- overrides[count].NCR5380_map_name = (NCR5380_map_type) pnp_port_start(dev, 0);
- overrides[count].board = BOARD_DTC3181E;
- count++;
- }
+ ports = NULL;
+ flags = 0;
+ switch (board) {
+ case BOARD_NCR5380:
+ flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
+ break;
+ case BOARD_NCR53C400A:
+ ports = ncr_53c400a_ports;
+ magic = ncr_53c400a_magic;
+ break;
+ case BOARD_HP_C2502:
+ ports = ncr_53c400a_ports;
+ magic = hp_c2502_magic;
+ break;
+ case BOARD_DTC3181E:
+ ports = dtc_3181e_ports;
+ magic = ncr_53c400a_magic;
+ break;
}
-#endif
-
- for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
- if (!(overrides[current_override].NCR5380_map_name))
- continue;
-
- ports = NULL;
- flags = 0;
- switch (overrides[current_override].board) {
- case BOARD_NCR5380:
- flags = FLAG_NO_PSEUDO_DMA | FLAG_DMA_FIXUP;
- break;
- case BOARD_NCR53C400A:
- ports = ncr_53c400a_ports;
- magic = ncr_53c400a_magic;
- break;
- case BOARD_HP_C2502:
- ports = ncr_53c400a_ports;
- magic = hp_c2502_magic;
- break;
- case BOARD_DTC3181E:
- ports = dtc_3181e_ports;
- magic = ncr_53c400a_magic;
- break;
- }
#ifndef SCSI_G_NCR5380_MEM
- if (ports && magic) {
- /* wakeup sequence for the NCR53C400A and DTC3181E */
-
- /* Disable the adapter and look for a free io port */
- magic_configure(-1, 0, magic);
-
- region_size = 16;
-
- if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
- for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], region_size, "ncr53c80"))
- continue;
- if (overrides[current_override].NCR5380_map_name == ports[i])
- break;
- release_region(ports[i], region_size);
- } else
- for (i = 0; ports[i]; i++) {
- if (!request_region(ports[i], region_size, "ncr53c80"))
- continue;
- if (inb(ports[i]) == 0xff)
- break;
- release_region(ports[i], region_size);
+ if (ports && magic) {
+ /* wakeup sequence for the NCR53C400A and DTC3181E */
+
+ /* Disable the adapter and look for a free io port */
+ magic_configure(-1, 0, magic);
+
+ region_size = 16;
+ if (base)
+ for (i = 0; ports[i]; i++) {
+ if (base == ports[i]) { /* index found */
+ if (!request_region(ports[i],
+ region_size,
+ "ncr53c80"))
+ return -EBUSY;
+ break;
}
- if (ports[i]) {
- /* At this point we have our region reserved */
- magic_configure(i, 0, magic); /* no IRQ yet */
- outb(0xc0, ports[i] + 9);
- if (inb(ports[i] + 9) != 0x80)
- continue;
- overrides[current_override].NCR5380_map_name = ports[i];
- port_idx = i;
- } else
- continue;
- }
+ }
else
- {
- /* Not a 53C400A style setup - just grab */
- region_size = 8;
- if (!request_region(overrides[current_override].NCR5380_map_name,
- region_size, "ncr5380"))
- continue;
- }
+ for (i = 0; ports[i]; i++) {
+ if (!request_region(ports[i], region_size,
+ "ncr53c80"))
+ continue;
+ if (inb(ports[i]) == 0xff)
+ break;
+ release_region(ports[i], region_size);
+ }
+ if (ports[i]) {
+ /* At this point we have our region reserved */
+ magic_configure(i, 0, magic); /* no IRQ yet */
+ outb(0xc0, ports[i] + 9);
+ if (inb(ports[i] + 9) != 0x80) {
+ ret = -ENODEV;
+ goto out_release;
+ }
+ base = ports[i];
+ port_idx = i;
+ } else
+ return -EINVAL;
+ }
+ else
+ {
+ /* NCR5380 - no configuration, just grab */
+ region_size = 8;
+ if (!base || !request_region(base, region_size, "ncr5380"))
+ return -EBUSY;
+ }
#else
- base = overrides[current_override].NCR5380_map_name;
- iomem_size = NCR53C400_region_size;
- if (!request_mem_region(base, iomem_size, "ncr5380"))
- continue;
- iomem = ioremap(base, iomem_size);
- if (!iomem) {
- release_mem_region(base, iomem_size);
- continue;
- }
+ iomem_size = NCR53C400_region_size;
+ if (!request_mem_region(base, iomem_size, "ncr5380"))
+ return -EBUSY;
+ iomem = ioremap(base, iomem_size);
+ if (!iomem) {
+ release_mem_region(base, iomem_size);
+ return -ENOMEM;
+ }
#endif
- instance = scsi_register(tpnt, sizeof(struct NCR5380_hostdata));
- if (instance == NULL)
- goto out_release;
- hostdata = shost_priv(instance);
+ instance = scsi_host_alloc(tpnt, sizeof(struct NCR5380_hostdata));
+ if (instance == NULL) {
+ ret = -ENOMEM;
+ goto out_release;
+ }
+ hostdata = shost_priv(instance);
#ifndef SCSI_G_NCR5380_MEM
- instance->io_port = overrides[current_override].NCR5380_map_name;
- instance->n_io_port = region_size;
- hostdata->io_width = 1; /* 8-bit PDMA by default */
-
- /*
- * On NCR53C400 boards, NCR5380 registers are mapped 8 past
- * the base address.
- */
- switch (overrides[current_override].board) {
- case BOARD_NCR53C400:
- instance->io_port += 8;
- hostdata->c400_ctl_status = 0;
- hostdata->c400_blk_cnt = 1;
- hostdata->c400_host_buf = 4;
- break;
- case BOARD_DTC3181E:
- hostdata->io_width = 2; /* 16-bit PDMA */
- /* fall through */
- case BOARD_NCR53C400A:
- case BOARD_HP_C2502:
- hostdata->c400_ctl_status = 9;
- hostdata->c400_blk_cnt = 10;
- hostdata->c400_host_buf = 8;
- break;
- }
+ instance->io_port = base;
+ instance->n_io_port = region_size;
+ hostdata->io_width = 1; /* 8-bit PDMA by default */
+
+ /*
+ * On NCR53C400 boards, NCR5380 registers are mapped 8 past
+ * the base address.
+ */
+ switch (board) {
+ case BOARD_NCR53C400:
+ instance->io_port += 8;
+ hostdata->c400_ctl_status = 0;
+ hostdata->c400_blk_cnt = 1;
+ hostdata->c400_host_buf = 4;
+ break;
+ case BOARD_DTC3181E:
+ hostdata->io_width = 2; /* 16-bit PDMA */
+ /* fall through */
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ hostdata->c400_ctl_status = 9;
+ hostdata->c400_blk_cnt = 10;
+ hostdata->c400_host_buf = 8;
+ break;
+ }
#else
- instance->base = overrides[current_override].NCR5380_map_name;
- hostdata->iomem = iomem;
- hostdata->iomem_size = iomem_size;
- switch (overrides[current_override].board) {
- case BOARD_NCR53C400:
- hostdata->c400_ctl_status = 0x100;
- hostdata->c400_blk_cnt = 0x101;
- hostdata->c400_host_buf = 0x104;
- break;
- case BOARD_DTC3181E:
- case BOARD_NCR53C400A:
- case BOARD_HP_C2502:
- pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
- goto out_unregister;
- }
+ instance->base = base;
+ hostdata->iomem = iomem;
+ hostdata->iomem_size = iomem_size;
+ switch (board) {
+ case BOARD_NCR53C400:
+ hostdata->c400_ctl_status = 0x100;
+ hostdata->c400_blk_cnt = 0x101;
+ hostdata->c400_host_buf = 0x104;
+ break;
+ case BOARD_DTC3181E:
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ pr_err(DRV_MODULE_NAME ": unknown register offsets\n");
+ ret = -EINVAL;
+ goto out_unregister;
+ }
#endif
- if (NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP))
- goto out_unregister;
+ ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
+ if (ret)
+ goto out_unregister;
- switch (overrides[current_override].board) {
- case BOARD_NCR53C400:
- case BOARD_DTC3181E:
- case BOARD_NCR53C400A:
- case BOARD_HP_C2502:
- NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
- }
+ switch (board) {
+ case BOARD_NCR53C400:
+ case BOARD_DTC3181E:
+ case BOARD_NCR53C400A:
+ case BOARD_HP_C2502:
+ NCR5380_write(hostdata->c400_ctl_status, CSR_BASE);
+ }
- NCR5380_maybe_reset_bus(instance);
+ NCR5380_maybe_reset_bus(instance);
- if (overrides[current_override].irq != IRQ_AUTO)
- instance->irq = overrides[current_override].irq;
- else
- instance->irq = NCR5380_probe_irq(instance, 0xffff);
+ if (irq != IRQ_AUTO)
+ instance->irq = irq;
+ else
+ instance->irq = NCR5380_probe_irq(instance, 0xffff);
- /* Compatibility with documented NCR5380 kernel parameters */
- if (instance->irq == 255)
- instance->irq = NO_IRQ;
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
- if (instance->irq != NO_IRQ) {
+ if (instance->irq != NO_IRQ) {
#ifndef SCSI_G_NCR5380_MEM
- /* set IRQ for HP C2502 */
- if (overrides[current_override].board == BOARD_HP_C2502)
- magic_configure(port_idx, instance->irq, magic);
+ /* set IRQ for HP C2502 */
+ if (board == BOARD_HP_C2502)
+ magic_configure(port_idx, instance->irq, magic);
#endif
- if (request_irq(instance->irq, generic_NCR5380_intr,
- 0, "NCR5380", instance)) {
- printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = NO_IRQ;
- }
- }
-
- if (instance->irq == NO_IRQ) {
- printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
- printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
+ if (request_irq(instance->irq, generic_NCR5380_intr,
+ 0, "NCR5380", instance)) {
+ printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
+ instance->irq = NO_IRQ;
}
+ }
- ++current_override;
- ++count;
+ if (instance->irq == NO_IRQ) {
+ printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
+ printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
- return count;
+ ret = scsi_add_host(instance, pdev);
+ if (ret)
+ goto out_free_irq;
+ scsi_scan_host(instance);
+ dev_set_drvdata(pdev, instance);
+ return 0;
+
+out_free_irq:
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
out_unregister:
- scsi_unregister(instance);
+ scsi_host_put(instance);
out_release:
#ifndef SCSI_G_NCR5380_MEM
- release_region(overrides[current_override].NCR5380_map_name, region_size);
+ release_region(base, region_size);
#else
iounmap(iomem);
release_mem_region(base, iomem_size);
#endif
- return count;
+ return ret;
}
-/**
- * generic_NCR5380_release_resources - free resources
- * @instance: host adapter to clean up
- *
- * Free the generic interface resources from this adapter.
- *
- * Locks: none
- */
-
-static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
+static void generic_NCR5380_release_resources(struct Scsi_Host *instance)
{
+ scsi_remove_host(instance);
if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
@@ -511,7 +329,7 @@ static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
release_mem_region(instance->base, hostdata->iomem_size);
}
#endif
- return 0;
+ scsi_host_put(instance);
}
/**
@@ -701,10 +519,9 @@ static int generic_NCR5380_dma_xfer_len(struct Scsi_Host *instance,
#include "NCR5380.c"
static struct scsi_host_template driver_template = {
+ .module = THIS_MODULE,
.proc_name = DRV_MODULE_NAME,
.name = "Generic NCR5380/NCR53C400 SCSI",
- .detect = generic_NCR5380_detect,
- .release = generic_NCR5380_release_resources,
.info = generic_NCR5380_info,
.queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
@@ -718,31 +535,115 @@ static struct scsi_host_template driver_template = {
.max_sectors = 128,
};
-#include "scsi_module.c"
-module_param(ncr_irq, int, 0);
-module_param(ncr_dma, int, 0);
-module_param(ncr_addr, int, 0);
-module_param(ncr_5380, int, 0);
-module_param(ncr_53c400, int, 0);
-module_param(ncr_53c400a, int, 0);
-module_param(dtc_3181e, int, 0);
-module_param(hp_c2502, int, 0);
-MODULE_LICENSE("GPL");
+static int generic_NCR5380_isa_match(struct device *pdev, unsigned int ndev)
+{
+ int ret = generic_NCR5380_init_one(&driver_template, pdev, base[ndev],
+ irq[ndev], card[ndev]);
+ if (ret) {
+ if (base[ndev])
+ printk(KERN_WARNING "Card not found at address 0x%03x\n",
+ base[ndev]);
+ return 0;
+ }
-#if !defined(SCSI_G_NCR5380_MEM) && defined(MODULE)
-static struct isapnp_device_id id_table[] = {
- {
- ISAPNP_ANY_ID, ISAPNP_ANY_ID,
- ISAPNP_VENDOR('D', 'T', 'C'), ISAPNP_FUNCTION(0x436e),
- 0},
- {0}
+ return 1;
+}
+
+static int generic_NCR5380_isa_remove(struct device *pdev,
+ unsigned int ndev)
+{
+ generic_NCR5380_release_resources(dev_get_drvdata(pdev));
+ dev_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct isa_driver generic_NCR5380_isa_driver = {
+ .match = generic_NCR5380_isa_match,
+ .remove = generic_NCR5380_isa_remove,
+ .driver = {
+ .name = DRV_MODULE_NAME
+ },
+};
+
+#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
+static struct pnp_device_id generic_NCR5380_pnp_ids[] = {
+ { .id = "DTC436e", .driver_data = BOARD_DTC3181E },
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, generic_NCR5380_pnp_ids);
+
+static int generic_NCR5380_pnp_probe(struct pnp_dev *pdev,
+ const struct pnp_device_id *id)
+{
+ int base, irq;
+
+ if (pnp_activate_dev(pdev) < 0)
+ return -EBUSY;
+
+ base = pnp_port_start(pdev, 0);
+ irq = pnp_irq(pdev, 0);
+
+ return generic_NCR5380_init_one(&driver_template, &pdev->dev, base, irq,
+ id->driver_data);
+}
+
+static void generic_NCR5380_pnp_remove(struct pnp_dev *pdev)
+{
+ generic_NCR5380_release_resources(pnp_get_drvdata(pdev));
+ pnp_set_drvdata(pdev, NULL);
+}
+
+static struct pnp_driver generic_NCR5380_pnp_driver = {
+ .name = DRV_MODULE_NAME,
+ .id_table = generic_NCR5380_pnp_ids,
+ .probe = generic_NCR5380_pnp_probe,
+ .remove = generic_NCR5380_pnp_remove,
};
+#endif /* !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP) */
+
+static int pnp_registered, isa_registered;
+
+static int __init generic_NCR5380_init(void)
+{
+ int ret = 0;
+
+ /* compatibility with old-style parameters */
+ if (irq[0] == 0 && base[0] == 0 && card[0] == -1) {
+ irq[0] = ncr_irq;
+ base[0] = ncr_addr;
+ if (ncr_5380)
+ card[0] = BOARD_NCR5380;
+ if (ncr_53c400)
+ card[0] = BOARD_NCR53C400;
+ if (ncr_53c400a)
+ card[0] = BOARD_NCR53C400A;
+ if (dtc_3181e)
+ card[0] = BOARD_DTC3181E;
+ if (hp_c2502)
+ card[0] = BOARD_HP_C2502;
+ }
-MODULE_DEVICE_TABLE(isapnp, id_table);
+#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
+ if (!pnp_register_driver(&generic_NCR5380_pnp_driver))
+ pnp_registered = 1;
#endif
+ ret = isa_register_driver(&generic_NCR5380_isa_driver, MAX_CARDS);
+ if (!ret)
+ isa_registered = 1;
+
+ return (pnp_registered || isa_registered) ? 0 : ret;
+}
+
+static void __exit generic_NCR5380_exit(void)
+{
+#if !defined(SCSI_G_NCR5380_MEM) && defined(CONFIG_PNP)
+ if (pnp_registered)
+ pnp_unregister_driver(&generic_NCR5380_pnp_driver);
+#endif
+ if (isa_registered)
+ isa_unregister_driver(&generic_NCR5380_isa_driver);
+}
-__setup("ncr5380=", do_NCR5380_setup);
-__setup("ncr53c400=", do_NCR53C400_setup);
-__setup("ncr53c400a=", do_NCR53C400A_setup);
-__setup("dtc3181e=", do_DTC3181E_setup);
+module_init(generic_NCR5380_init);
+module_exit(generic_NCR5380_exit);
diff --git a/drivers/scsi/g_NCR5380.h b/drivers/scsi/g_NCR5380.h
index 595177428d76..b175b9234458 100644
--- a/drivers/scsi/g_NCR5380.h
+++ b/drivers/scsi/g_NCR5380.h
@@ -14,15 +14,9 @@
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
-#define __STRVAL(x) #x
-#define STRVAL(x) __STRVAL(x)
-
#ifndef SCSI_G_NCR5380_MEM
#define DRV_MODULE_NAME "g_NCR5380"
-#define NCR5380_map_type int
-#define NCR5380_map_name port
-
#define NCR5380_read(reg) \
inb(instance->io_port + (reg))
#define NCR5380_write(reg, value) \
@@ -38,8 +32,6 @@
/* therefore SCSI_G_NCR5380_MEM */
#define DRV_MODULE_NAME "g_NCR5380_mmio"
-#define NCR5380_map_type unsigned long
-#define NCR5380_map_name base
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR53C400_region_size 0x3a00
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index 47966909286d..e27b4d4e6ae2 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -63,7 +63,7 @@ config SCSI_UFSHCD_PCI
config SCSI_UFS_DWC_TC_PCI
tristate "DesignWare pci support using a G210 Test Chip"
- depends on SCSI_UFSHCD && PCI
+ depends on SCSI_UFSHCD_PCI
---help---
Synopsys Test Chip is a PHY for prototyping purposes.
diff --git a/drivers/scsi/ufs/ufs_quirks.h b/drivers/scsi/ufs/ufs_quirks.h
index ee4ab85e2801..22f881e9253a 100644
--- a/drivers/scsi/ufs/ufs_quirks.h
+++ b/drivers/scsi/ufs/ufs_quirks.h
@@ -25,6 +25,7 @@
#define UFS_VENDOR_TOSHIBA 0x198
#define UFS_VENDOR_SAMSUNG 0x1CE
+#define UFS_VENDOR_SKHYNIX 0x1AD
/**
* ufs_device_info - ufs device details
@@ -145,6 +146,7 @@ static struct ufs_dev_fix ufs_fixups[] = {
UFS_DEVICE_QUIRK_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
UFS_DEVICE_QUIRK_PA_TACTIVATE),
+ UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
END_FIX
};
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 37f3c51e9d92..05c745663c10 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1266,9 +1266,12 @@ static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba,
ucd_req_ptr->header.dword_1 = UPIU_HEADER_DWORD(
0, query->request.query_func, 0, 0);
- /* Data segment length */
- ucd_req_ptr->header.dword_2 = UPIU_HEADER_DWORD(
- 0, 0, len >> 8, (u8)len);
+ /* Data segment length only need for WRITE_DESC */
+ if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC)
+ ucd_req_ptr->header.dword_2 =
+ UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len);
+ else
+ ucd_req_ptr->header.dword_2 = 0;
/* Copy the Query Request buffer as is */
memcpy(&ucd_req_ptr->qr, &query->request.upiu_req,
@@ -6500,6 +6503,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
if (IS_ERR(hba->devfreq)) {
dev_err(hba->dev, "Unable to register with devfreq %ld\n",
PTR_ERR(hba->devfreq));
+ err = PTR_ERR(hba->devfreq);
goto out_remove_scsi_host;
}
/* Suspend devfreq until the UFS device is detected */