Merge tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2020-01-29 21:13:27 +0300
committer: Linus Torvalds <torvalds@linux-foundation.org> 2020-01-29 21:13:27 +0300
commit: ca9b5b6283984f67434cee810f3b08e19630226d (patch)
tree: fb2e2db2434920a857b7ce6dfbd789b6f279d412
parent: aac96626713fe167c672f9a008be0f514aa3e237 (diff)
parent: 85f4c95172d606dd66f7ee1fa50c45a245535ffd (diff)
download: linux-ca9b5b6283984f67434cee810f3b08e19630226d.tar.xz
106 files changed, 824 insertions, 934 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d291b28c2b4..5590daffdb5a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6181,6 +6181,12 @@ M:	Maxim Levitsky <maximlevitsky@gmail.com>
 S:	Maintained
 F:	drivers/media/rc/ene_ir.*
 
+EPAPR HYPERVISOR BYTE CHANNEL DEVICE DRIVER
+M:	Laurentiu Tudor <laurentiu.tudor@nxp.com>
+L:	linuxppc-dev@lists.ozlabs.org
+S:	Maintained
+F:	drivers/tty/ehv_bytechan.c
+
 EPSON S1D13XXX FRAMEBUFFER DRIVER
 M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c
index 5d4c76a77a9f..f19aa577354b 100644
--- a/arch/alpha/kernel/setup.c
+++ b/arch/alpha/kernel/setup.c
@@ -655,8 +655,6 @@ setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 7ee89dc61f6e..e1c647490f00 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -572,10 +572,6 @@ void __init setup_arch(char **cmdline_p)
 	 */
 	root_mountflags &= ~MS_RDONLY;
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
 	arc_unwind_init();
 }
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d0a464e317ea..d8e18cdd96d3 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -1164,8 +1164,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index b6f9455d7ca3..a34890bf309f 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -360,9 +360,6 @@ void __init setup_arch(char **cmdline_p)
 	init_task.thread_info.ttbr0 = __pa_symbol(empty_zero_page);
 #endif
 
-#ifdef CONFIG_VT
-	conswitchp = &dummy_con;
-#endif
 	if (boot_args[1] || boot_args[2] || boot_args[3]) {
 		pr_err("WARNING: x1-x3 nonzero in violation of boot protocol:\n"
 			"\tx1: %016llx\n\tx2: %016llx\n\tx3: %016llx\n"
diff --git a/arch/csky/kernel/setup.c b/arch/csky/kernel/setup.c
index 23ee604aafdb..52eaf31ba27f 100644
--- a/arch/csky/kernel/setup.c
+++ b/arch/csky/kernel/setup.c
@@ -136,10 +136,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_HIGHMEM
 	kmap_init();
 #endif
-
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
 
 unsigned long va_pa_offset;
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index c49fcef754de..4009383453f7 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -608,9 +608,6 @@ setup_arch (char **cmdline_p)
 
 #ifdef CONFIG_VT
 	if (!conswitchp) {
-# if defined(CONFIG_DUMMY_CONSOLE)
-		conswitchp = &dummy_con;
-# endif
 # if defined(CONFIG_VGA_CONSOLE)
 		/*
 		 * Non-legacy systems may route legacy VGA MMIO range to system
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index 528484feff80..ab8aa7be260f 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -274,10 +274,6 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	switch (m68k_machtype) {
 #ifdef CONFIG_AMIGA
 	case MACH_AMIGA:
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 3c5def10d486..a63483de7a42 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -146,10 +146,6 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 	boot_command_line[COMMAND_LINE_SIZE-1] = 0;
 
-#if defined(CONFIG_FRAMEBUFFER_CONSOLE) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
-
 	/*
 	 * Give all the memory to the bootmap allocator, tell it to put the
 	 * boot mem_map at the start of memory.
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index 03ce7f9facfe..d806dee71a9c 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -70,7 +70,6 @@ void __init config_sun3x(void)
 		break;
 	default:
 		serial_console = 0;
-		conswitchp = &dummy_con;
 		break;
 	}
 #endif
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 522a0c5d9c59..511c1ab7f57f 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -65,10 +65,6 @@ void __init setup_arch(char **cmdline_p)
 	microblaze_cache_init();
 
 	xilinx_pci_init();
-
-#if defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
 
 #ifdef CONFIG_MTD_UCLINUX
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c3d4212b5f1d..a28057946ed1 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -796,8 +796,6 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_VT)
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 
diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c
index 31d29d92478e..a066efbe53c0 100644
--- a/arch/nds32/kernel/setup.c
+++ b/arch/nds32/kernel/setup.c
@@ -317,11 +317,6 @@ void __init setup_arch(char **cmdline_p)
 
 	unflatten_and_copy_device_tree();
 
-	if(IS_ENABLED(CONFIG_VT)) {
-		if(IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-			conswitchp = &dummy_con;
-	}
-
 	*cmdline_p = boot_command_line;
 	early_trap_init();
 }
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index 4cf35b09c0ec..3c6e3c813a0b 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -196,8 +196,4 @@ void __init setup_arch(char **cmdline_p)
 	 * get kmalloc into gear
 	 */
 	paging_init();
-
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
-#endif
 }
diff --git a/arch/openrisc/kernel/setup.c b/arch/openrisc/kernel/setup.c
index d668f5be3a99..c0a774b51e45 100644
--- a/arch/openrisc/kernel/setup.c
+++ b/arch/openrisc/kernel/setup.c
@@ -308,11 +308,6 @@ void __init setup_arch(char **cmdline_p)
 	/* paging_init() sets up the MMU and marks all pages as reserved */
 	paging_init();
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	if (!conswitchp)
-		conswitchp = &dummy_con;
-#endif
-
 	*cmdline_p = boot_command_line;
 
 	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 53a21ce927de..e320bae501d3 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -151,10 +151,6 @@ void __init setup_arch(char **cmdline_p)
 	dma_ops_init();
 #endif
 
-#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;	/* we use do_take_over_console() later ! */
-#endif
-
 	clear_sched_clock_stable();
 }
 
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 7cea5978f21f..f061e06e9f51 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -479,8 +479,10 @@ static void __init fixup_port_irq(int index,
 	port->irq = virq;
 
 #ifdef CONFIG_SERIAL_8250_FSL
-	if (of_device_is_compatible(np, "fsl,ns16550"))
+	if (of_device_is_compatible(np, "fsl,ns16550")) {
 		port->handle_irq = fsl8250_handle_irq;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+	}
 #endif
 }
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 488f1eecc0de..7f8c890360fe 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -949,9 +949,6 @@ void __init setup_arch(char **cmdline_p)
 
 	early_memtest(min_low_pfn << PAGE_SHIFT, max_low_pfn << PAGE_SHIFT);
 
-	if (IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-		conswitchp = &dummy_con;
-
 	if (ppc_md.setup_arch)
 		ppc_md.setup_arch();
 
diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c
index 9680d766f20e..855eedb8d7d7 100644
--- a/arch/powerpc/platforms/cell/setup.c
+++ b/arch/powerpc/platforms/cell/setup.c
@@ -240,9 +240,6 @@ static void __init cell_setup_arch(void)
 	init_pci_config_tokens();
 
 	cbe_pervasive_init();
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
 
 	mmio_nvram_init();
 }
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
index 9cd6f3e1000b..47f73103ef74 100644
--- a/arch/powerpc/platforms/maple/setup.c
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -183,9 +183,6 @@ static void __init maple_setup_arch(void)
 	/* Lookup PCI hosts */
        	maple_pci_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
 	maple_use_rtas_reboot_and_halt_if_present();
 
 	printk(KERN_DEBUG "Using native/NAP idle loop\n");
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index 05a52f10c2f0..b612474f8f8e 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -147,10 +147,6 @@ static void __init pas_setup_arch(void)
 	/* Lookup PCI hosts */
 	pas_pci_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	/* Remap SDC register for doing reset */
 	/* XXXOJN This should maybe come out of the device tree */
 	reset_reg = ioremap(0xfc101100, 4);
diff --git a/arch/powerpc/platforms/ps3/setup.c b/arch/powerpc/platforms/ps3/setup.c
index 8108b9b9b9ea..b29368931c56 100644
--- a/arch/powerpc/platforms/ps3/setup.c
+++ b/arch/powerpc/platforms/ps3/setup.c
@@ -200,10 +200,6 @@ static void __init ps3_setup_arch(void)
 	smp_init_ps3();
 #endif
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	prealloc_ps3fb_videomemory();
 	prealloc_ps3flash_bounce_buffer();
 
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index 365ff8420bfe..9babfcf3bb70 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -78,9 +78,5 @@ void __init setup_arch(char **cmdline_p)
 	setup_smp();
 #endif
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	riscv_fill_hwcap();
 }
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index d5fbd754f41a..87a467dff5eb 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -241,8 +241,6 @@ static void __init conmode_default(void)
 		SET_CONSOLE_SCLP;
 #endif
 	}
-	if (IS_ENABLED(CONFIG_VT) && IS_ENABLED(CONFIG_DUMMY_CONSOLE))
-		conswitchp = &dummy_con;
 }
 
 #ifdef CONFIG_CRASH_DUMP
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index d232cfa01877..67f5a3b44c2e 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -341,10 +341,6 @@ void __init setup_arch(char **cmdline_p)
 
 	paging_init();
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	/* Perform the machine specific initialisation */
 	if (likely(sh_mv.mv_setup))
 		sh_mv.mv_setup(cmdline_p);
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index afe1592a6d08..5d1bcfce05d8 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -332,10 +332,6 @@ void __init setup_arch(char **cmdline_p)
 		break;
 	}
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	idprom_init();
 	load_mmu();
 
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index fd2182a5c32d..75e3992203b6 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -653,10 +653,6 @@ void __init setup_arch(char **cmdline_p)
 	else
 		pr_info("ARCH: SUN4U\n");
 
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
 	idprom_init();
 
 	if (!root_flags)
diff --git a/arch/unicore32/kernel/setup.c b/arch/unicore32/kernel/setup.c
index 95ae3b54df68..0c4242a5ee1d 100644
--- a/arch/unicore32/kernel/setup.c
+++ b/arch/unicore32/kernel/setup.c
@@ -270,8 +270,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 	early_trap_init();
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 2441b64d061f..1e4c20a1efec 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1228,8 +1228,6 @@ void __init setup_arch(char **cmdline_p)
 #if defined(CONFIG_VGA_CONSOLE)
 	if (!efi_enabled(EFI_BOOT) || (efi_mem_type(0xa0000) != EFI_CONVENTIONAL_MEMORY))
 		conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 #endif
 #endif
 	x86_init.oem.banner();
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 0f93b67c7a5a..adead45debe8 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -405,8 +405,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_VT
 # if defined(CONFIG_VGA_CONSOLE)
 	conswitchp = &vga_con;
-# elif defined(CONFIG_DUMMY_CONSOLE)
-	conswitchp = &dummy_con;
 # endif
 #endif
 }
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 4f24e46ebe7c..56db949a7b70 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -15,10 +15,11 @@
 #include <linux/serial.h>
 #include <linux/tty.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 
 struct ttyprintk_port {
 	struct tty_port port;
-	struct mutex port_write_mutex;
+	spinlock_t spinlock;
 };
 
 static struct ttyprintk_port tpk_port;
@@ -99,11 +100,12 @@ static int tpk_open(struct tty_struct *tty, struct file *filp)
 static void tpk_close(struct tty_struct *tty, struct file *filp)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	/* flush tpk_printk buffer */
 	tpk_printk(NULL, 0);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	tty_port_close(&tpkp->port, tty, filp);
 }
@@ -115,13 +117,14 @@ static int tpk_write(struct tty_struct *tty,
 		const unsigned char *buf, int count)
 {
 	struct ttyprintk_port *tpkp = tty->driver_data;
+	unsigned long flags;
 	int ret;
 
 
 	/* exclusive use of tpk_printk within this tty */
-	mutex_lock(&tpkp->port_write_mutex);
+	spin_lock_irqsave(&tpkp->spinlock, flags);
 	ret = tpk_printk(buf, count);
-	mutex_unlock(&tpkp->port_write_mutex);
+	spin_unlock_irqrestore(&tpkp->spinlock, flags);
 
 	return ret;
 }
@@ -171,7 +174,7 @@ static int __init ttyprintk_init(void)
 {
 	int ret = -ENOMEM;
 
-	mutex_init(&tpk_port.port_write_mutex);
+	spin_lock_init(&tpk_port.spinlock);
 
 	ttyprintk_driver = tty_alloc_driver(1,
 			TTY_DRIVER_RESET_TERMIOS |
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 98361acd3053..27b506bf03ce 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -115,11 +115,9 @@
 struct n_hdlc_buf {
 	struct list_head  list_item;
 	int		  count;
-	char		  buf[1];
+	char		  buf[];
 };
 
-#define	N_HDLC_BUF_SIZE	(sizeof(struct n_hdlc_buf) + maxframe)
-
 struct n_hdlc_buf_list {
 	struct list_head  list;
 	int		  count;
@@ -524,7 +522,8 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
 		/* no buffers in free list, attempt to allocate another rx buffer */
 		/* unless the maximum count has been reached */
 		if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
-			buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
+			buf = kmalloc(struct_size(buf, buf, maxframe),
+				      GFP_ATOMIC);
 	}
 	
 	if (!buf) {
@@ -853,7 +852,7 @@ static struct n_hdlc *n_hdlc_alloc(void)
 
 	/* allocate free rx buffer list */
 	for(i=0;i<DEFAULT_RX_BUF_COUNT;i++) {
-		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
+		buf = kmalloc(struct_size(buf, buf, maxframe), GFP_KERNEL);
 		if (buf)
 			n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
 		else if (debuglevel >= DEBUG_LEVEL_INFO)	
@@ -862,7 +861,7 @@ static struct n_hdlc *n_hdlc_alloc(void)
 	
 	/* allocate free tx buffer list */
 	for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
-		buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
+		buf = kmalloc(struct_size(buf, buf, maxframe), GFP_KERNEL);
 		if (buf)
 			n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
 		else if (debuglevel >= DEBUG_LEVEL_INFO)	
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index ce5309d00280..42345e79920c 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -115,8 +115,8 @@ int serdev_device_add(struct serdev_device *serdev)
 
 	err = device_add(&serdev->dev);
 	if (err < 0) {
-		dev_err(&serdev->dev, "Can't add %s, status %d\n",
-			dev_name(&serdev->dev), err);
+		dev_err(&serdev->dev, "Can't add %s, status %pe\n",
+			dev_name(&serdev->dev), ERR_PTR(err));
 		goto err_clear_serdev;
 	}
 
@@ -540,7 +540,8 @@ static int of_serdev_register_devices(struct serdev_controller *ctrl)
 		err = serdev_device_add(serdev);
 		if (err) {
 			dev_err(&serdev->dev,
-				"failure adding device. status %d\n", err);
+				"failure adding device. status %pe\n",
+				ERR_PTR(err));
 			serdev_device_put(serdev);
 		} else
 			found = true;
@@ -656,7 +657,8 @@ static acpi_status acpi_serdev_register_device(struct serdev_controller *ctrl,
 	err = serdev_device_add(serdev);
 	if (err) {
 		dev_err(&serdev->dev,
-			"failure adding ACPI serdev device. status %d\n", err);
+			"failure adding ACPI serdev device. status %pe\n",
+			ERR_PTR(err));
 		serdev_device_put(serdev);
 	}
 
@@ -741,8 +743,8 @@ int serdev_controller_add(struct serdev_controller *ctrl)
 	ret_of = of_serdev_register_devices(ctrl);
 	ret_acpi = acpi_serdev_register_devices(ctrl);
 	if (ret_of && ret_acpi) {
-		dev_dbg(&ctrl->dev, "no devices registered: of:%d acpi:%d\n",
-			ret_of, ret_acpi);
+		dev_dbg(&ctrl->dev, "no devices registered: of:%pe acpi:%pe\n",
+			ERR_PTR(ret_of), ERR_PTR(ret_acpi));
 		ret = -ENODEV;
 		goto err_rpm_disable;
 	}
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 32b3acf8150a..718e010fcb04 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -41,8 +41,43 @@
 
 static const char serial21285_name[] = "Footbridge UART";
 
-#define tx_enabled(port)	((port)->unused[0])
-#define rx_enabled(port)	((port)->unused[1])
+/*
+ * We only need 2 bits of data, so instead of creating a whole structure for
+ * this, use bits of the private_data pointer of the uart port structure.
+ */
+#define tx_enabled_bit	0
+#define rx_enabled_bit	1
+
+static bool is_enabled(struct uart_port *port, int bit)
+{
+	unsigned long private_data = (unsigned long)port->private_data;
+
+	if (test_bit(bit, &private_data))
+		return true;
+	return false;
+}
+
+static void enable(struct uart_port *port, int bit)
+{
+	unsigned long private_data = (unsigned long)port->private_data;
+
+	set_bit(bit, &private_data);
+}
+
+static void disable(struct uart_port *port, int bit)
+{
+	unsigned long private_data = (unsigned long)port->private_data;
+
+	clear_bit(bit, &private_data);
+}
+
+#define is_tx_enabled(port)	is_enabled(port, tx_enabled_bit)
+#define tx_enable(port)		enable(port, tx_enabled_bit)
+#define tx_disable(port)	disable(port, tx_enabled_bit)
+
+#define is_rx_enabled(port)	is_enabled(port, rx_enabled_bit)
+#define rx_enable(port)		enable(port, rx_enabled_bit)
+#define rx_disable(port)	disable(port, rx_enabled_bit)
 
 /*
  * The documented expression for selecting the divisor is:
@@ -57,25 +92,25 @@ static const char serial21285_name[] = "Footbridge UART";
 
 static void serial21285_stop_tx(struct uart_port *port)
 {
-	if (tx_enabled(port)) {
+	if (is_tx_enabled(port)) {
 		disable_irq_nosync(IRQ_CONTX);
-		tx_enabled(port) = 0;
+		tx_disable(port);
 	}
 }
 
 static void serial21285_start_tx(struct uart_port *port)
 {
-	if (!tx_enabled(port)) {
+	if (!is_tx_enabled(port)) {
 		enable_irq(IRQ_CONTX);
-		tx_enabled(port) = 1;
+		tx_enable(port);
 	}
 }
 
 static void serial21285_stop_rx(struct uart_port *port)
 {
-	if (rx_enabled(port)) {
+	if (is_rx_enabled(port)) {
 		disable_irq_nosync(IRQ_CONRX);
-		rx_enabled(port) = 0;
+		rx_disable(port);
 	}
 }
 
@@ -185,8 +220,8 @@ static int serial21285_startup(struct uart_port *port)
 {
 	int ret;
 
-	tx_enabled(port) = 1;
-	rx_enabled(port) = 1;
+	tx_enable(port);
+	rx_enable(port);
 
 	ret = request_irq(IRQ_CONRX, serial21285_rx_chars, 0,
 			  serial21285_name, port);
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 6e67fd89445a..d657aa14c3e4 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -5,10 +5,6 @@
  *    Copyright (C) 2016 Jeremy Kerr <jk@ozlabs.org>, IBM Corp.
  *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
  */
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -406,6 +402,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
 	port.port.unthrottle = aspeed_vuart_unthrottle;
 	port.port.status = UPSTAT_SYNC_FIFO;
 	port.port.dev = &pdev->dev;
+	port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
 
 	rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
 	if (rc < 0)
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 8ce700c1a7fc..e70e3cc30050 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -16,14 +16,19 @@
 
 #include "8250.h"
 
+/**
+ * struct bcm2835aux_data - driver private data of BCM2835 auxiliary UART
+ * @clk: clock producer of the port's uartclk
+ * @line: index of the port's serial8250_ports[] entry
+ */
 struct bcm2835aux_data {
-	struct uart_8250_port uart;
 	struct clk *clk;
 	int line;
 };
 
 static int bcm2835aux_serial_probe(struct platform_device *pdev)
 {
+	struct uart_8250_port up = { };
 	struct bcm2835aux_data *data;
 	struct resource *res;
 	int ret;
@@ -34,23 +39,21 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* initialize data */
-	spin_lock_init(&data->uart.port.lock);
-	data->uart.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
-	data->uart.port.dev = &pdev->dev;
-	data->uart.port.regshift = 2;
-	data->uart.port.type = PORT_16550;
-	data->uart.port.iotype = UPIO_MEM;
-	data->uart.port.fifosize = 8;
-	data->uart.port.flags = UPF_SHARE_IRQ |
-				UPF_FIXED_PORT |
-				UPF_FIXED_TYPE |
-				UPF_SKIP_TEST;
+	up.capabilities = UART_CAP_FIFO | UART_CAP_MINI;
+	up.port.dev = &pdev->dev;
+	up.port.regshift = 2;
+	up.port.type = PORT_16550;
+	up.port.iotype = UPIO_MEM;
+	up.port.fifosize = 8;
+	up.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE |
+			UPF_SKIP_TEST | UPF_IOREMAP;
 
 	/* get the clock - this also enables the HW */
 	data->clk = devm_clk_get(&pdev->dev, NULL);
 	ret = PTR_ERR_OR_ZERO(data->clk);
 	if (ret) {
-		dev_err(&pdev->dev, "could not get clk: %d\n", ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "could not get clk: %d\n", ret);
 		return ret;
 	}
 
@@ -58,7 +61,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
 		return ret;
-	data->uart.port.irq = ret;
+	up.port.irq = ret;
 
 	/* map the main registers */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -66,15 +69,13 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "memory resource not found");
 		return -EINVAL;
 	}
-	data->uart.port.membase = devm_ioremap_resource(&pdev->dev, res);
-	ret = PTR_ERR_OR_ZERO(data->uart.port.membase);
-	if (ret)
-		return ret;
+	up.port.mapbase = res->start;
+	up.port.mapsize = resource_size(res);
 
 	/* Check for a fixed line number */
 	ret = of_alias_get_id(pdev->dev.of_node, "serial");
 	if (ret >= 0)
-		data->uart.port.line = ret;
+		up.port.line = ret;
 
 	/* enable the clock as a last step */
 	ret = clk_prepare_enable(data->clk);
@@ -89,13 +90,14 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
 	 * so we have to multiply the actual clock by 2
 	 * to get identical baudrates.
 	 */
-	data->uart.port.uartclk = clk_get_rate(data->clk) * 2;
+	up.port.uartclk = clk_get_rate(data->clk) * 2;
 
 	/* register the port */
-	ret = serial8250_register_8250_port(&data->uart);
+	ret = serial8250_register_8250_port(&up);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "unable to register 8250 port - %d\n",
-			ret);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev,
+				"unable to register 8250 port - %d\n", ret);
 		goto dis_clk;
 	}
 	data->line = ret;
@@ -113,7 +115,7 @@ static int bcm2835aux_serial_remove(struct platform_device *pdev)
 {
 	struct bcm2835aux_data *data = platform_get_drvdata(pdev);
 
-	serial8250_unregister_port(data->uart.port.line);
+	serial8250_unregister_port(data->line);
 	clk_disable_unprepare(data->clk);
 
 	return 0;
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index e682390ce0de..0894a22fd702 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -816,6 +816,7 @@ static int serial8250_probe(struct platform_device *dev)
 		uart.port.flags		= p->flags;
 		uart.port.mapbase	= p->mapbase;
 		uart.port.hub6		= p->hub6;
+		uart.port.has_sysrq	= p->has_sysrq;
 		uart.port.private_data	= p->private_data;
 		uart.port.type		= p->type;
 		uart.port.serial_in	= p->serial_in;
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 108cd55f9c4d..91e9b070d36d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -186,7 +186,7 @@ static int xr17v35x_startup(struct uart_port *port)
 static void exar_shutdown(struct uart_port *port)
 {
 	unsigned char lsr;
-	bool tx_complete = 0;
+	bool tx_complete = false;
 	struct uart_8250_port *up = up_to_u8250p(port);
 	struct circ_buf *xmit = &port->state->xmit;
 	int i = 0;
@@ -194,9 +194,9 @@ static void exar_shutdown(struct uart_port *port)
 	do {
 		lsr = serial_in(up, UART_LSR);
 		if (lsr & (UART_LSR_TEMT | UART_LSR_THRE))
-			tx_complete = 1;
+			tx_complete = true;
 		else
-			tx_complete = 0;
+			tx_complete = false;
 		usleep_range(1000, 1100);
 	} while (!uart_circ_empty(xmit) && !tx_complete && i++ < 1000);
 
diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c
index aa0e216d5ead..0d0c80905c58 100644
--- a/drivers/tty/serial/8250/8250_fsl.c
+++ b/drivers/tty/serial/8250/8250_fsl.c
@@ -1,8 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_reg.h>
 #include <linux/serial_8250.h>
 
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 92fbf46ce3bd..531ad67395e0 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -222,8 +222,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 
 	if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) &&
 	    (of_device_is_compatible(np, "fsl,ns16550") ||
-	     of_device_is_compatible(np, "fsl,16550-FIFO64")))
+	     of_device_is_compatible(np, "fsl,16550-FIFO64"))) {
 		port->handle_irq = fsl8250_handle_irq;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+	}
 
 	return 0;
 err_unprepare:
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index e603c66d6cc4..6f343ca08440 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -8,10 +8,6 @@
  *
  */
 
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/device.h>
 #include <linux/io.h>
@@ -1192,6 +1188,7 @@ static int omap8250_probe(struct platform_device *pdev)
 	up.port.throttle = omap_8250_throttle;
 	up.port.unthrottle = omap_8250_unthrottle;
 	up.port.rs485_config = omap_8250_rs485_config;
+	up.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
 
 	ret = of_alias_get_id(np, "serial");
 	if (ret < 0) {
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 9ff5dfad590a..430e3467aff7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -11,10 +11,6 @@
  *  membase is an 'ioremapped' cookie.
  */
 
-#if defined(CONFIG_SERIAL_8250_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/ioport.h>
@@ -1001,6 +997,9 @@ static void autoconfig_16550a(struct uart_8250_port *up)
 	up->port.type = PORT_16550A;
 	up->capabilities |= UART_CAP_FIFO;
 
+	if (!IS_ENABLED(CONFIG_SERIAL_8250_16550A_VARIANTS))
+		return;
+
 	/*
 	 * Check for presence of the EFR when DLAB is set.
 	 * Only ST16C650V1 UARTs pass this test.
@@ -3055,6 +3054,7 @@ void serial8250_init_port(struct uart_8250_port *up)
 
 	spin_lock_init(&port->lock);
 	port->ops = &serial8250_pops;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
 
 	up->cur_iotype = 0xFF;
 }
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index fab3d4f20667..ffd167e886ae 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -60,6 +60,16 @@ config SERIAL_8250_PNP
 	  This builds standard PNP serial support. You may be able to
 	  disable this feature if you only need legacy serial support.
 
+config SERIAL_8250_16550A_VARIANTS
+	bool "Support for variants of the 16550A serial port"
+	depends on SERIAL_8250
+	help
+	  The 8250 driver can probe for many variants of the venerable 16550A
+	  serial port. Doing so takes additional time at boot.
+
+	  On modern systems, especially those using serial only for a simple
+	  console, you can say N here.
+
 config SERIAL_8250_FINTEK
 	bool "Support for Fintek F81216A LPC to 4 UART RS485 API"
 	depends on SERIAL_8250
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 99f5da3bf913..52eaac21ff9f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -237,7 +237,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on PLAT_SAMSUNG || ARCH_EXYNOS
+	depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -975,7 +975,7 @@ config SERIAL_QCOM_GENI
 
 config SERIAL_QCOM_GENI_CONSOLE
 	bool "QCOM GENI Serial Console support"
-	depends on SERIAL_QCOM_GENI=y
+	depends on SERIAL_QCOM_GENI
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2c37d11726ab..3284f34e9dfe 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -15,10 +15,6 @@
  * and hooked into this driver.
  */
 
-#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -728,6 +724,7 @@ static int pl010_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.iotype = UPIO_MEM;
 	uap->port.irq = dev->irq[0];
 	uap->port.fifosize = 16;
+	uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_AMBA_PL010_CONSOLE);
 	uap->port.ops = &amba_pl010_pops;
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 4b28134d596a..2296bb0f9578 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -16,11 +16,6 @@
  * and hooked into this driver.
  */
 
-
-#if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -1452,8 +1447,6 @@ static void pl011_modem_status(struct uart_amba_port *uap)
 
 static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 {
-	unsigned int dummy_read;
-
 	if (!uap->vendor->cts_event_workaround)
 		return;
 
@@ -1465,8 +1458,8 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 	 * single apb access will incur 2 pclk(133.12Mhz) delay,
 	 * so add 2 dummy reads
 	 */
-	dummy_read = pl011_read(uap, REG_ICR);
-	dummy_read = pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
+	pl011_read(uap, REG_ICR);
 }
 
 static irqreturn_t pl011_int(int irq, void *dev_id)
@@ -2579,6 +2572,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
 	uap->port.mapbase = mmiobase->start;
 	uap->port.membase = base;
 	uap->port.fifosize = uap->fifosize;
+	uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_AMBA_PL011_CONSOLE);
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = index;
 
@@ -2769,6 +2763,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
 	.remove		= sbsa_uart_remove,
 	.driver	= {
 		.name	= "sbsa-uart",
+		.pm	= &pl011_dev_pm_ops,
 		.of_match_table = of_match_ptr(sbsa_uart_of_match),
 		.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
 		.suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c
index 60cd133ffbbc..e8d56e899ec7 100644
--- a/drivers/tty/serial/apbuart.c
+++ b/drivers/tty/serial/apbuart.c
@@ -11,10 +11,6 @@
  *  Copyright (C) 2009 Kristoffer Glembo <kristoffer@gaisler.com>, Aeroflex Gaisler AB
  */
 
-#if defined(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
@@ -626,6 +622,7 @@ static int __init grlib_apbuart_configure(void)
 		port->irq = 0;
 		port->iotype = UPIO_MEM;
 		port->ops = &grlib_apbuart_ops;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_GRLIB_GAISLER_APBUART_CONSOLE);
 		port->flags = UPF_BOOT_AUTOCONF;
 		port->line = line;
 		port->uartclk = *freq_hz;
diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c
index d904a3a345e7..17c3fc398fc6 100644
--- a/drivers/tty/serial/arc_uart.c
+++ b/drivers/tty/serial/arc_uart.c
@@ -21,10 +21,6 @@
  *  -check if sysreq works
  */
 
-#if defined(CONFIG_SERIAL_ARC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -625,6 +621,7 @@ static int arc_serial_probe(struct platform_device *pdev)
 	port->flags = UPF_BOOT_AUTOCONF;
 	port->line = dev_id;
 	port->ops = &arc_serial_pops;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ARC_CONSOLE);
 
 	port->fifosize = ARC_UART_TX_FIFO_SIZE;
 
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1ba9bc667e13..c15c398c88a9 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -51,10 +51,6 @@
 #define ATMEL_RTS_HIGH_OFFSET	16
 #define ATMEL_RTS_LOW_OFFSET	20
 
-#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 
 #include "serial_mctrl_gpio.h"
@@ -196,10 +192,6 @@ struct atmel_uart_port {
 static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
 static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
 
-#ifdef SUPPORT_SYSRQ
-static struct console atmel_console;
-#endif
-
 #if defined(CONFIG_OF)
 static const struct of_device_id atmel_serial_dt_ids[] = {
 	{ .compatible = "atmel,at91rm9200-usart-serial" },
@@ -313,7 +305,11 @@ static int atmel_config_rs485(struct uart_port *port,
 
 	if (rs485conf->flags & SER_RS485_ENABLED) {
 		dev_dbg(port->dev, "Setting UART to RS485\n");
-		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+		if (port->rs485.flags & SER_RS485_RX_DURING_TX)
+			atmel_port->tx_done_mask = ATMEL_US_TXRDY;
+		else
+			atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
+
 		atmel_uart_writel(port, ATMEL_US_TTGR,
 				  rs485conf->delay_rts_after_send);
 		mode |= ATMEL_US_USMODE_RS485;
@@ -831,7 +827,7 @@ static void atmel_tx_chars(struct uart_port *port)
 	struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
 	if (port->x_char &&
-	    (atmel_uart_readl(port, ATMEL_US_CSR) & atmel_port->tx_done_mask)) {
+	    (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY)) {
 		atmel_uart_write_char(port, port->x_char);
 		port->icount.tx++;
 		port->x_char = 0;
@@ -839,8 +835,7 @@ static void atmel_tx_chars(struct uart_port *port)
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port))
 		return;
 
-	while (atmel_uart_readl(port, ATMEL_US_CSR) &
-	       atmel_port->tx_done_mask) {
+	while (atmel_uart_readl(port, ATMEL_US_CSR) & ATMEL_US_TXRDY) {
 		atmel_uart_write_char(port, xmit->buf[xmit->tail]);
 		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
 		port->icount.tx++;
@@ -851,10 +846,20 @@ static void atmel_tx_chars(struct uart_port *port)
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	if (!uart_circ_empty(xmit))
+	if (!uart_circ_empty(xmit)) {
+		/* we still have characters to transmit, so we should continue
+		 * transmitting them when TX is ready, regardless of
+		 * mode or duplexity
+		 */
+		atmel_port->tx_done_mask |= ATMEL_US_TXRDY;
+
 		/* Enable interrupts */
 		atmel_uart_writel(port, ATMEL_US_IER,
 				  atmel_port->tx_done_mask);
+	} else {
+		if (atmel_uart_is_half_duplex(port))
+			atmel_port->tx_done_mask &= ~ATMEL_US_TXRDY;
+	}
 }
 
 static void atmel_complete_tx_dma(void *arg)
@@ -1067,7 +1072,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
 
 chan_err:
 	dev_err(port->dev, "TX channel not available, switch to pio\n");
-	atmel_port->use_dma_tx = 0;
+	atmel_port->use_dma_tx = false;
 	if (atmel_port->chan_tx)
 		atmel_release_tx_dma(port);
 	return -EINVAL;
@@ -1266,7 +1271,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 
 chan_err:
 	dev_err(port->dev, "RX channel not available, switch to pio\n");
-	atmel_port->use_dma_rx = 0;
+	atmel_port->use_dma_rx = false;
 	if (atmel_port->chan_rx)
 		atmel_release_rx_dma(port);
 	return -EINVAL;
@@ -1693,7 +1698,7 @@ static int atmel_prepare_rx_pdc(struct uart_port *port)
 					DMA_FROM_DEVICE);
 				kfree(atmel_port->pdc_rx[0].buf);
 			}
-			atmel_port->use_pdc_rx = 0;
+			atmel_port->use_pdc_rx = false;
 			return -ENOMEM;
 		}
 		pdc->dma_addr = dma_map_single(port->dev,
@@ -2526,8 +2531,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
 	 * Use TXEMPTY for interrupt when rs485 or ISO7816 else TXRDY or
 	 * ENDTX|TXBUFE
 	 */
-	if (port->rs485.flags & SER_RS485_ENABLED ||
-	    port->iso7816.flags & SER_ISO7816_ENABLED)
+	if (atmel_uart_is_half_duplex(port))
 		atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
 	else if (atmel_use_pdc_tx(port)) {
 		port->fifosize = PDC_BUFFER_SIZE;
@@ -2878,6 +2882,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
 	atmel_port = &atmel_ports[ret];
 	atmel_port->backup_imr = 0;
 	atmel_port->uart.line = ret;
+	atmel_port->uart.has_sysrq = IS_ENABLED(CONFIG_SERIAL_ATMEL_CONSOLE);
 	atmel_serial_probe_fifos(atmel_port, pdev);
 
 	atomic_set(&atmel_port->tasklet_shutdown, 0);
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index b7adc6127b3d..5674da2b76f0 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -10,10 +10,6 @@
  * my board.
  */
 
-#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
@@ -858,6 +854,7 @@ static int bcm_uart_probe(struct platform_device *pdev)
 	port->fifosize = 16;
 	port->uartclk = clk_get_rate(clk) / 2;
 	port->line = pdev->id;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_BCM63XX_CONSOLE);
 	clk_put(clk);
 
 	ret = uart_add_one_port(&bcm_uart_driver, port);
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 061590795680..95abc6faa3d5 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -8,10 +8,6 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  */
 
-#if defined(CONFIG_SERIAL_CLPS711X_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/console.h>
@@ -479,6 +475,7 @@ static int uart_clps711x_probe(struct platform_device *pdev)
 	s->port.mapbase		= res->start;
 	s->port.type		= PORT_CLPS711X;
 	s->port.fifosize	= 16;
+	s->port.has_sysrq	= IS_ENABLED(CONFIG_SERIAL_CLPS711X_CONSOLE);
 	s->port.flags		= UPF_SKIP_TEST | UPF_FIXED_TYPE;
 	s->port.uartclk		= clk_get_rate(uart_clk);
 	s->port.ops		= &uart_clps711x_ops;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index de6d02f7abe2..19d5a4cf29a6 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -40,10 +40,6 @@
 #include <asm/fs_pd.h>
 #include <asm/udbg.h>
 
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 #include <linux/kernel.h>
 
@@ -347,9 +343,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
 		/* ASSUMPTION: it contains nothing valid */
 		i = 0;
 	}
-#ifdef SUPPORT_SYSRQ
 	port->sysrq = 0;
-#endif
 	goto error_return;
 }
 
@@ -1204,7 +1198,8 @@ static int cpm_uart_init_port(struct device_node *np,
 	pinfo->port.uartclk = ppc_proc_freq;
 	pinfo->port.mapbase = (unsigned long)mem;
 	pinfo->port.type = PORT_CPM;
-	pinfo->port.ops = &cpm_uart_pops,
+	pinfo->port.ops = &cpm_uart_pops;
+	pinfo->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_CPM_CONSOLE);
 	pinfo->port.iotype = UPIO_MEM;
 	pinfo->port.fifosize = pinfo->tx_nrfifos * pinfo->tx_fifosize;
 	spin_lock_init(&pinfo->port.lock);
diff --git a/drivers/tty/serial/dz.c b/drivers/tty/serial/dz.c
index 730da413d8ed..4552742c3859 100644
--- a/drivers/tty/serial/dz.c
+++ b/drivers/tty/serial/dz.c
@@ -29,10 +29,6 @@
 
 #undef DEBUG_DZ
 
-#if defined(CONFIG_SERIAL_DZ_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/bitops.h>
 #include <linux/compiler.h>
 #include <linux/console.h>
@@ -787,6 +783,7 @@ static void __init dz_init_ports(void)
 		uport->ops	= &dz_ops;
 		uport->line	= line;
 		uport->mapbase	= base;
+		uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_DZ_CONSOLE);
 	}
 }
 
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index d6b5e5463746..2ac87128d7fd 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -1,8 +1,4 @@
 // SPDX-License-Identifier: GPL-2.0
-#if defined(CONFIG_SERIAL_EFM32_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
@@ -748,6 +744,7 @@ static int efm32_uart_probe(struct platform_device *pdev)
 	efm_port->port.type = PORT_EFMUART;
 	efm_port->port.iotype = UPIO_MEM32;
 	efm_port->port.fifosize = 2;
+	efm_port->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_EFM32_UART_CONSOLE);
 	efm_port->port.ops = &efm32_uart_pops;
 	efm_port->port.flags = UPF_BOOT_AUTOCONF;
 
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index 205c31a61684..3e28be402aef 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -6,11 +6,6 @@
  * Copyright 2017-2019 NXP
  */
 
-#if defined(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE) && \
-	defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/console.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -279,10 +274,8 @@ static irqreturn_t linflex_rxint(int irq, void *dev_id)
 		if (brk) {
 			uart_handle_break(sport);
 		} else {
-#ifdef SUPPORT_SYSRQ
 			if (uart_handle_sysrq_char(sport, (unsigned char)rx))
 				continue;
-#endif
 			tty_insert_flip_char(port, rx, flg);
 		}
 	}
@@ -863,6 +856,7 @@ static int linflex_probe(struct platform_device *pdev)
 	sport->irq = platform_get_irq(pdev, 0);
 	sport->ops = &linflex_pops;
 	sport->flags = UPF_BOOT_AUTOCONF;
+	sport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LINFLEXUART_CONSOLE);
 
 	linflex_ports[sport->line] = sport;
 
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 4e128d19e0ad..91e2805e6441 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -5,10 +5,6 @@
  *  Copyright 2012-2014 Freescale Semiconductor, Inc.
  */
 
-#if defined(CONFIG_SERIAL_FSL_LPUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/dma-mapping.h>
@@ -864,9 +860,7 @@ static void lpuart_rxint(struct lpuart_port *sport)
 			if (sr & UARTSR1_OR)
 				flg = TTY_OVERRUN;
 
-#ifdef SUPPORT_SYSRQ
 			sport->port.sysrq = 0;
-#endif
 		}
 
 		tty_insert_flip_char(port, rx, flg);
@@ -946,9 +940,7 @@ static void lpuart32_rxint(struct lpuart_port *sport)
 			if (sr & UARTSTAT_OR)
 				flg = TTY_OVERRUN;
 
-#ifdef SUPPORT_SYSRQ
 			sport->port.sysrq = 0;
-#endif
 		}
 
 		tty_insert_flip_char(port, rx, flg);
@@ -2376,7 +2368,9 @@ static int __init lpuart32_early_console_setup(struct earlycon_device *device,
 	if (!device->port.membase)
 		return -ENODEV;
 
-	device->port.iotype = UPIO_MEM32BE;
+	if (device->port.iotype != UPIO_MEM32)
+		device->port.iotype = UPIO_MEM32BE;
+
 	device->con->write = lpuart32_early_write;
 	return 0;
 }
@@ -2396,9 +2390,6 @@ static int __init lpuart32_imx_early_console_setup(struct earlycon_device *devic
 OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
 OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
-OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup);
-EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
-EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
 
 #define LPUART_CONSOLE	(&lpuart_console)
 #define LPUART32_CONSOLE	(&lpuart32_console)
@@ -2461,6 +2452,7 @@ static int lpuart_probe(struct platform_device *pdev)
 		sport->port.ops = &lpuart32_pops;
 	else
 		sport->port.ops = &lpuart_pops;
+	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_FSL_LPUART_CONSOLE);
 	sport->port.flags = UPF_BOOT_AUTOCONF;
 
 	if (lpuart_is_32(sport))
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index a9e20e6c63ad..0c6c63166250 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -8,10 +8,6 @@
  * Copyright (C) 2004 Pengutronix
  */
 
-#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -700,22 +696,33 @@ static void imx_uart_start_tx(struct uart_port *port)
 	}
 }
 
-static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	u32 usr1;
 
-	spin_lock(&sport->port.lock);
-
 	imx_uart_writel(sport, USR1_RTSD, USR1);
 	usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS;
 	uart_handle_cts_change(&sport->port, !!usr1);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 
-	spin_unlock(&sport->port.lock);
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_uart_rtsint(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	irqreturn_t ret;
+
+	spin_lock(&sport->port.lock);
+
+	ret = __imx_uart_rtsint(irq, dev_id);
+
+	spin_unlock(&sport->port.lock);
+
+	return ret;
+}
+
 static irqreturn_t imx_uart_txint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
@@ -726,14 +733,12 @@ static irqreturn_t imx_uart_txint(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+static irqreturn_t __imx_uart_rxint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
 	unsigned int rx, flg, ignored = 0;
 	struct tty_port *port = &sport->port.state->port;
 
-	spin_lock(&sport->port.lock);
-
 	while (imx_uart_readl(sport, USR2) & USR2_RDR) {
 		u32 usr2;
 
@@ -779,9 +784,7 @@ static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
 			if (rx & URXD_OVRRUN)
 				flg = TTY_OVERRUN;
 
-#ifdef SUPPORT_SYSRQ
 			sport->port.sysrq = 0;
-#endif
 		}
 
 		if (sport->port.ignore_status_mask & URXD_DUMMY_READ)
@@ -792,11 +795,25 @@ static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
 	}
 
 out:
-	spin_unlock(&sport->port.lock);
 	tty_flip_buffer_push(port);
+
 	return IRQ_HANDLED;
 }
 
+static irqreturn_t imx_uart_rxint(int irq, void *dev_id)
+{
+	struct imx_port *sport = dev_id;
+	irqreturn_t ret;
+
+	spin_lock(&sport->port.lock);
+
+	ret = __imx_uart_rxint(irq, dev_id);
+
+	spin_unlock(&sport->port.lock);
+
+	return ret;
+}
+
 static void imx_uart_clear_rx_errors(struct imx_port *sport);
 
 /*
@@ -855,6 +872,8 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id)
 	unsigned int usr1, usr2, ucr1, ucr2, ucr3, ucr4;
 	irqreturn_t ret = IRQ_NONE;
 
+	spin_lock(&sport->port.lock);
+
 	usr1 = imx_uart_readl(sport, USR1);
 	usr2 = imx_uart_readl(sport, USR2);
 	ucr1 = imx_uart_readl(sport, UCR1);
@@ -888,27 +907,25 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id)
 		usr2 &= ~USR2_ORE;
 
 	if (usr1 & (USR1_RRDY | USR1_AGTIM)) {
-		imx_uart_rxint(irq, dev_id);
+		__imx_uart_rxint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
 	if ((usr1 & USR1_TRDY) || (usr2 & USR2_TXDC)) {
-		imx_uart_txint(irq, dev_id);
+		imx_uart_transmit_buffer(sport);
 		ret = IRQ_HANDLED;
 	}
 
 	if (usr1 & USR1_DTRD) {
 		imx_uart_writel(sport, USR1_DTRD, USR1);
 
-		spin_lock(&sport->port.lock);
 		imx_uart_mctrl_check(sport);
-		spin_unlock(&sport->port.lock);
 
 		ret = IRQ_HANDLED;
 	}
 
 	if (usr1 & USR1_RTSD) {
-		imx_uart_rtsint(irq, dev_id);
+		__imx_uart_rtsint(irq, dev_id);
 		ret = IRQ_HANDLED;
 	}
 
@@ -923,6 +940,8 @@ static irqreturn_t imx_uart_int(int irq, void *dev_id)
 		ret = IRQ_HANDLED;
 	}
 
+	spin_unlock(&sport->port.lock);
+
 	return ret;
 }
 
@@ -2231,6 +2250,7 @@ static int imx_uart_probe(struct platform_device *pdev)
 	sport->port.iotype = UPIO_MEM;
 	sport->port.irq = rxirq;
 	sport->port.fifosize = 32;
+	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE);
 	sport->port.ops = &imx_uart_pops;
 	sport->port.rs485_config = imx_uart_rs485_config;
 	sport->port.flags = UPF_BOOT_AUTOCONF;
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index 8c810733df3d..86fff69d7e7c 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -38,10 +38,6 @@
 #include <asm/sgi/hpc3.h>
 #include <asm/sgi/ip22.h>
 
-#if defined(CONFIG_SERIAL_IP22_ZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 
 #include "ip22zilog.h"
@@ -1080,6 +1076,7 @@ static struct uart_driver ip22zilog_reg = {
 
 static void __init ip22zilog_prepare(void)
 {
+	unsigned char sysrq_on = IS_ENABLED(CONFIG_SERIAL_IP22_ZILOG_CONSOLE);
 	struct uart_ip22zilog_port *up;
 	struct zilog_layout *rp;
 	int channel, chip;
@@ -1115,6 +1112,7 @@ static void __init ip22zilog_prepare(void)
 		up[(chip * 2) + 0].port.irq = zilog_irq;
 		up[(chip * 2) + 0].port.uartclk = ZS_CLOCK;
 		up[(chip * 2) + 0].port.fifosize = 1;
+		up[(chip * 2) + 0].port.has_sysrq = sysrq_on;
 		up[(chip * 2) + 0].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 0].port.type = PORT_IP22ZILOG;
 		up[(chip * 2) + 0].port.flags = 0;
@@ -1126,6 +1124,7 @@ static void __init ip22zilog_prepare(void)
 		up[(chip * 2) + 1].port.irq = zilog_irq;
 		up[(chip * 2) + 1].port.uartclk = ZS_CLOCK;
 		up[(chip * 2) + 1].port.fifosize = 1;
+		up[(chip * 2) + 1].port.has_sysrq = sysrq_on;
 		up[(chip * 2) + 1].port.ops = &ip22zilog_pops;
 		up[(chip * 2) + 1].port.type = PORT_IP22ZILOG;
 		up[(chip * 2) + 1].port.line = (chip * 2) + 1;
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 4029272891f9..5022447afa23 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -118,7 +118,7 @@ static int kgdb_nmi_poll_one_knock(void)
 	int c = -1;
 	const char *magic = kgdb_nmi_magic;
 	size_t m = strlen(magic);
-	bool printch = 0;
+	bool printch = false;
 
 	c = dbg_io_ops->read_char();
 	if (c == NO_POLL_CHAR)
@@ -130,7 +130,7 @@ static int kgdb_nmi_poll_one_knock(void)
 		n = (n + 1) % m;
 		if (!n)
 			return 1;
-		printch = 1;
+		printch = true;
 	} else {
 		n = 0;
 	}
diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c
index 164b18372c02..d2c08b760f83 100644
--- a/drivers/tty/serial/meson_uart.c
+++ b/drivers/tty/serial/meson_uart.c
@@ -5,15 +5,12 @@
  * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
  */
 
-#if defined(CONFIG_SERIAL_MESON_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
@@ -76,6 +73,8 @@
 #define AML_UART_PORT_OFFSET		6
 #define AML_UART_DEV_NAME		"ttyAML"
 
+#define AML_UART_POLL_USEC		5
+#define AML_UART_TIMEOUT_USEC		10000
 
 static struct uart_driver meson_uart_driver;
 
@@ -427,6 +426,64 @@ static void meson_uart_config_port(struct uart_port *port, int flags)
 	}
 }
 
+#ifdef CONFIG_CONSOLE_POLL
+/*
+ * Console polling routines for writing and reading from the uart while
+ * in an interrupt or debug context (i.e. kgdb).
+ */
+
+static int meson_uart_poll_get_char(struct uart_port *port)
+{
+	u32 c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	if (readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)
+		c = NO_POLL_CHAR;
+	else
+		c = readl(port->membase + AML_UART_RFIFO);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	return c;
+}
+
+static void meson_uart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+	unsigned long flags;
+	u32 reg;
+	int ret;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* Wait until FIFO is empty or timeout */
+	ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg,
+					reg & AML_UART_TX_EMPTY,
+					AML_UART_POLL_USEC,
+					AML_UART_TIMEOUT_USEC);
+	if (ret == -ETIMEDOUT) {
+		dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n");
+		goto out;
+	}
+
+	/* Write the character */
+	writel(c, port->membase + AML_UART_WFIFO);
+
+	/* Wait until FIFO is empty or timeout */
+	ret = readl_poll_timeout_atomic(port->membase + AML_UART_STATUS, reg,
+					reg & AML_UART_TX_EMPTY,
+					AML_UART_POLL_USEC,
+					AML_UART_TIMEOUT_USEC);
+	if (ret == -ETIMEDOUT)
+		dev_err(port->dev, "Timeout waiting for UART TX EMPTY\n");
+
+out:
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+#endif /* CONFIG_CONSOLE_POLL */
+
 static const struct uart_ops meson_uart_ops = {
 	.set_mctrl      = meson_uart_set_mctrl,
 	.get_mctrl      = meson_uart_get_mctrl,
@@ -442,6 +499,10 @@ static const struct uart_ops meson_uart_ops = {
 	.request_port	= meson_uart_request_port,
 	.release_port	= meson_uart_release_port,
 	.verify_port	= meson_uart_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+	.poll_get_char	= meson_uart_poll_get_char,
+	.poll_put_char	= meson_uart_poll_put_char,
+#endif
 };
 
 #ifdef CONFIG_SERIAL_MESON_CONSOLE
@@ -703,6 +764,7 @@ static int meson_uart_probe(struct platform_device *pdev)
 	port->mapsize = resource_size(res_mem);
 	port->irq = res_irq->start;
 	port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MESON_CONSOLE);
 	port->dev = &pdev->dev;
 	port->line = pdev->id;
 	port->type = PORT_MESON;
diff --git a/drivers/tty/serial/milbeaut_usio.c b/drivers/tty/serial/milbeaut_usio.c
index 949ab7efc4fc..8f2cab7f66ad 100644
--- a/drivers/tty/serial/milbeaut_usio.c
+++ b/drivers/tty/serial/milbeaut_usio.c
@@ -3,10 +3,6 @@
  * Copyright (C) 2018 Socionext Inc.
  */
 
-#if defined(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/module.h>
@@ -537,6 +533,7 @@ static int mlb_usio_probe(struct platform_device *pdev)
 	port->irq = mlb_usio_irq[index][RX];
 	port->uartclk = clk_get_rate(clk);
 	port->fifosize = 128;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MILBEAUT_USIO_CONSOLE);
 	port->iotype = UPIO_MEM32;
 	port->flags = UPF_BOOT_AUTOCONF | UPF_SPD_VHI;
 	port->line = index;
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index 3a75ee08d619..af1700445251 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -44,10 +44,6 @@
 #include <asm/mpc52xx.h>
 #include <asm/mpc52xx_psc.h>
 
-#if defined(CONFIG_SERIAL_MPC52xx_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 
 
@@ -1382,12 +1378,8 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
 		ch = psc_ops->read_char(port);
 
 		/* Handle sysreq char */
-#ifdef SUPPORT_SYSRQ
-		if (uart_handle_sysrq_char(port, ch)) {
-			port->sysrq = 0;
+		if (uart_handle_sysrq_char(port, ch))
 			continue;
-		}
-#endif
 
 		/* Store it */
 
@@ -1770,6 +1762,7 @@ static int mpc52xx_uart_of_probe(struct platform_device *op)
 	spin_lock_init(&port->lock);
 	port->uartclk = uartclk;
 	port->fifosize	= 512;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MPC52xx_CONSOLE);
 	port->iotype	= UPIO_MEM;
 	port->flags	= UPF_BOOT_AUTOCONF |
 			  (uart_console(port) ? 0 : UPF_IOREMAP);
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index f6c45a796433..60a9c53fa7cb 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -7,10 +7,6 @@
  * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
  */
 
-#if defined(CONFIG_SERIAL_MSM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-# define SUPPORT_SYSRQ
-#endif
-
 #include <linux/kernel.h>
 #include <linux/atomic.h>
 #include <linux/dma-mapping.h>
@@ -610,7 +606,7 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
 				   UARTDM_RX_SIZE, dma->dir);
 	ret = dma_mapping_error(uart->dev, dma->phys);
 	if (ret)
-		return;
+		goto sw_mode;
 
 	dma->desc = dmaengine_prep_slave_single(dma->chan, dma->phys,
 						UARTDM_RX_SIZE, DMA_DEV_TO_MEM,
@@ -661,6 +657,22 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
 	return;
 unmap:
 	dma_unmap_single(uart->dev, dma->phys, UARTDM_RX_SIZE, dma->dir);
+
+sw_mode:
+	/*
+	 * Switch from DMA to SW/FIFO mode. After clearing Rx BAM (UARTDM_DMEN),
+	 * receiver must be reset.
+	 */
+	msm_write(uart, UART_CR_CMD_RESET_RX, UART_CR);
+	msm_write(uart, UART_CR_RX_ENABLE, UART_CR);
+
+	msm_write(uart, UART_CR_CMD_RESET_STALE_INT, UART_CR);
+	msm_write(uart, 0xFFFFFF, UARTDM_DMRX);
+	msm_write(uart, UART_CR_CMD_STALE_EVENT_ENABLE, UART_CR);
+
+	/* Re-enable RX interrupts */
+	msm_port->imr |= (UART_IMR_RXLEV | UART_IMR_RXSTALE);
+	msm_write(uart, msm_port->imr, UART_IMR);
 }
 
 static void msm_stop_rx(struct uart_port *port)
@@ -1810,6 +1822,7 @@ static int msm_serial_probe(struct platform_device *pdev)
 	if (unlikely(irq < 0))
 		return -ENXIO;
 	port->irq = irq;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MSM_CONSOLE);
 
 	platform_set_drvdata(pdev, port);
 
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index fc58a004bef4..47ab280f553b 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -25,11 +25,7 @@
 #include <asm/irq.h>
 #include <asm/parisc-device.h>
 
-#if defined(CONFIG_SERIAL_MUX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
 #include <linux/sysrq.h>
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 
 #define MUX_OFFSET 0x800
@@ -483,6 +479,7 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->ops	= &mux_pops;
 		port->flags	= UPF_BOOT_AUTOCONF;
 		port->line	= port_cnt;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_MUX_CONSOLE);
 
 		/* The port->timeout needs to match what is present in
 		 * uart_wait_until_sent in serial_core.c.  Otherwise
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index e34525970682..b4f835e7de23 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -12,10 +12,6 @@
  * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
  */
 
-#if defined(CONFIG_SERIAL_MXS_AUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -1693,6 +1689,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	s->port.fifosize = MXS_AUART_FIFO_SIZE;
 	s->port.uartclk = clk_get_rate(s->clk);
 	s->port.type = PORT_IMX;
+	s->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_MXS_AUART_CONSOLE);
 
 	mxs_init_regs(s);
 
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 6420ae581a80..48017cec7f2f 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -16,10 +16,6 @@
  * this driver as required for the omap-platform.
  */
 
-#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -493,10 +489,13 @@ static unsigned int check_modem_status(struct uart_omap_port *up)
 static void serial_omap_rlsi(struct uart_omap_port *up, unsigned int lsr)
 {
 	unsigned int flag;
-	unsigned char ch = 0;
 
+	/*
+	 * Read one data character out to avoid stalling the receiver according
+	 * to the table 23-246 of the omap4 TRM.
+	 */
 	if (likely(lsr & UART_LSR_DR))
-		ch = serial_in(up, UART_RX);
+		serial_in(up, UART_RX);
 
 	up->port.icount.rx++;
 	flag = TTY_NORMAL;
@@ -1680,6 +1679,7 @@ static int serial_omap_probe(struct platform_device *pdev)
 	up->port.regshift = 2;
 	up->port.fifosize = 64;
 	up->port.ops = &serial_omap_pops;
+	up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_OMAP_CONSOLE);
 
 	if (pdev->dev.of_node)
 		ret = of_alias_get_id(pdev->dev.of_node, "serial");
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index c16234bca78f..0a96217dba67 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -2,9 +2,6 @@
 /*
  *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
  */
-#if defined(CONFIG_SERIAL_PCH_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
 #include <linux/kernel.h>
 #include <linux/serial_reg.h>
 #include <linux/slab.h>
@@ -587,12 +584,8 @@ static int pch_uart_hal_read(struct eg20t_port *priv, unsigned char *buf,
 			if (uart_handle_break(port))
 				continue;
 		}
-#ifdef SUPPORT_SYSRQ
-		if (port->sysrq) {
-			if (uart_handle_sysrq_char(port, rbr))
-				continue;
-		}
-#endif
+		if (uart_handle_sysrq_char(port, rbr))
+			continue;
 
 		buf[i++] = rbr;
 	}
@@ -1796,6 +1789,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
 	priv->port.flags = UPF_BOOT_AUTOCONF;
 	priv->port.fifosize = fifosize;
 	priv->port.line = board->line_no;
+	priv->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PCH_UART_CONSOLE);
 	priv->trigger = PCH_UART_HAL_TRIGGER_M;
 
 	snprintf(priv->irq_name, IRQ_NAME_SIZE,
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index bcb5bf70534e..ba65a3bbd72a 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -61,10 +61,6 @@
 #define of_machine_is_compatible(x) (0)
 #endif
 
-#if defined (CONFIG_SERIAL_PMACZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial.h>
 #include <linux/serial_core.h>
 
@@ -1721,6 +1717,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
 	uap->control_reg   = uap->port.membase;
 	uap->data_reg      = uap->control_reg + 4;
 	uap->port_type     = 0;
+	uap->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PMACZILOG_CONSOLE);
 
 	pmz_convert_to_zs(uap, CS8, 0, 9600);
 
diff --git a/drivers/tty/serial/pnx8xxx_uart.c b/drivers/tty/serial/pnx8xxx_uart.c
index 223a9499104e..972d94e8d32b 100644
--- a/drivers/tty/serial/pnx8xxx_uart.c
+++ b/drivers/tty/serial/pnx8xxx_uart.c
@@ -10,10 +10,6 @@
  * Copyright (C) 2000 Deep Blue Solutions Ltd.
  */
 
-#if defined(CONFIG_SERIAL_PNX8XXX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -220,9 +216,7 @@ static void pnx8xxx_rx_chars(struct pnx8xxx_port *sport)
 			else if (status & FIFO_TO_SM(PNX8XXX_UART_FIFO_RXFE))
 				flg = TTY_FRAME;
 
-#ifdef SUPPORT_SYSRQ
 			sport->port.sysrq = 0;
-#endif
 		}
 
 		if (uart_handle_sysrq_char(&sport->port, ch))
@@ -800,6 +794,7 @@ static int pnx8xxx_serial_probe(struct platform_device *pdev)
 			if (pnx8xxx_ports[i].port.mapbase != res->start)
 				continue;
 
+			pnx8xxx_ports[i].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PNX8XXX_CONSOLE);
 			pnx8xxx_ports[i].port.dev = &pdev->dev;
 			uart_add_one_port(&pnx8xxx_reg, &pnx8xxx_ports[i].port);
 			platform_set_drvdata(pdev, &pnx8xxx_ports[i]);
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 4932b674f7ef..41319ef96fa6 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -19,10 +19,6 @@
  */
 
 
-#if defined(CONFIG_SERIAL_PXA_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/console.h>
@@ -879,6 +875,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
+	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_PXA_CONSOLE);
 
 	ret = serial_pxa_probe_dt(dev, sport);
 	if (ret > 0)
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index ff63728a95f4..191abb18fc2a 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -1,10 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2017-2018, The Linux foundation. All rights reserved.
 
-#if defined(CONFIG_SERIAL_QCOM_GENI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-# define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/io.h>
@@ -14,6 +10,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/pm_wakeirq.h>
 #include <linux/qcom-geni-se.h>
 #include <linux/serial.h>
@@ -92,7 +89,11 @@
 #define DEF_TX_WM		2
 #define DEF_FIFO_WIDTH_BITS	32
 #define UART_RX_WM		2
-#define MAX_LOOPBACK_CFG	3
+
+/* SE_UART_LOOPBACK_CFG */
+#define RX_TX_SORTED	BIT(0)
+#define CTS_RTS_SORTED	BIT(1)
+#define RX_TX_CTS_RTS_SORTED	(RX_TX_SORTED | CTS_RTS_SORTED)
 
 #ifdef CONFIG_CONSOLE_POLL
 #define CONSOLE_RX_BYTES_PW 1
@@ -103,7 +104,7 @@
 struct qcom_geni_serial_port {
 	struct uart_port uport;
 	struct geni_se se;
-	char name[20];
+	const char *name;
 	u32 tx_fifo_depth;
 	u32 tx_fifo_width;
 	u32 rx_fifo_depth;
@@ -164,30 +165,6 @@ static struct qcom_geni_serial_port qcom_geni_uart_ports[GENI_UART_PORTS] = {
 	},
 };
 
-static ssize_t loopback_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
-
-	return snprintf(buf, sizeof(u32), "%d\n", port->loopback);
-}
-
-static ssize_t loopback_store(struct device *dev,
-				struct device_attribute *attr, const char *buf,
-				size_t size)
-{
-	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
-	u32 loopback;
-
-	if (kstrtoint(buf, 0, &loopback) || loopback > MAX_LOOPBACK_CFG) {
-		dev_err(dev, "Invalid input\n");
-		return -EINVAL;
-	}
-	port->loopback = loopback;
-	return size;
-}
-static DEVICE_ATTR_RW(loopback);
-
 static struct qcom_geni_serial_port qcom_geni_console_port = {
 	.uport = {
 		.iotype = UPIO_MEM,
@@ -237,10 +214,14 @@ static void qcom_geni_serial_set_mctrl(struct uart_port *uport,
 							unsigned int mctrl)
 {
 	u32 uart_manual_rfr = 0;
+	struct qcom_geni_serial_port *port = to_dev_port(uport, uport);
 
 	if (uart_console(uport))
 		return;
 
+	if (mctrl & TIOCM_LOOP)
+		port->loopback = RX_TX_CTS_RTS_SORTED;
+
 	if (!(mctrl & TIOCM_RTS))
 		uart_manual_rfr = UART_MANUAL_RFR_EN | UART_RFR_NOT_READY;
 	writel(uart_manual_rfr, uport->membase + SE_UART_MANUAL_RFR);
@@ -757,15 +738,6 @@ out_write_wakeup:
 		uart_write_wakeup(uport);
 }
 
-static irqreturn_t qcom_geni_serial_wakeup_isr(int isr, void *dev)
-{
-	struct uart_port *uport = dev;
-
-	pm_wakeup_event(uport->dev, 2000);
-
-	return IRQ_HANDLED;
-}
-
 static irqreturn_t qcom_geni_serial_isr(int isr, void *dev)
 {
 	u32 m_irq_en;
@@ -1302,50 +1274,57 @@ static int qcom_geni_serial_probe(struct platform_device *pdev)
 	port->rx_fifo_depth = DEF_FIFO_DEPTH_WORDS;
 	port->tx_fifo_width = DEF_FIFO_WIDTH_BITS;
 
-	scnprintf(port->name, sizeof(port->name), "qcom_geni_serial_%s%d",
-		(uart_console(uport) ? "console" : "uart"), uport->line);
+	port->name = devm_kasprintf(uport->dev, GFP_KERNEL,
+			"qcom_geni_serial_%s%d",
+			uart_console(uport) ? "console" : "uart", uport->line);
+	if (!port->name)
+		return -ENOMEM;
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
 	uport->irq = irq;
+	uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE);
+
+	if (!console)
+		port->wakeup_irq = platform_get_irq_optional(pdev, 1);
+
+	uport->private_data = drv;
+	platform_set_drvdata(pdev, port);
+	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
+
+	ret = uart_add_one_port(drv, uport);
+	if (ret)
+		return ret;
 
 	irq_set_status_flags(uport->irq, IRQ_NOAUTOEN);
 	ret = devm_request_irq(uport->dev, uport->irq, qcom_geni_serial_isr,
 			IRQF_TRIGGER_HIGH, port->name, uport);
 	if (ret) {
 		dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret);
+		uart_remove_one_port(drv, uport);
 		return ret;
 	}
 
-	if (!console) {
-		port->wakeup_irq = platform_get_irq(pdev, 1);
-		if (port->wakeup_irq < 0) {
-			dev_err(&pdev->dev, "Failed to get wakeup IRQ %d\n",
-					port->wakeup_irq);
-		} else {
-			irq_set_status_flags(port->wakeup_irq, IRQ_NOAUTOEN);
-			ret = devm_request_irq(uport->dev, port->wakeup_irq,
-				qcom_geni_serial_wakeup_isr,
-				IRQF_TRIGGER_FALLING, "uart_wakeup", uport);
-			if (ret) {
-				dev_err(uport->dev, "Failed to register wakeup IRQ ret %d\n",
-						ret);
-				return ret;
-			}
-
-			device_init_wakeup(&pdev->dev, true);
-			ret = dev_pm_set_wake_irq(&pdev->dev, port->wakeup_irq);
-			if (unlikely(ret))
-				dev_err(uport->dev, "%s:Failed to set IRQ wake:%d\n",
-						__func__, ret);
+	/*
+	 * Set pm_runtime status as ACTIVE so that wakeup_irq gets
+	 * enabled/disabled from dev_pm_arm_wake_irq during system
+	 * suspend/resume respectively.
+	 */
+	pm_runtime_set_active(&pdev->dev);
+
+	if (port->wakeup_irq > 0) {
+		device_init_wakeup(&pdev->dev, true);
+		ret = dev_pm_set_dedicated_wake_irq(&pdev->dev,
+						port->wakeup_irq);
+		if (ret) {
+			device_init_wakeup(&pdev->dev, false);
+			uart_remove_one_port(drv, uport);
+			return ret;
 		}
 	}
-	uport->private_data = drv;
-	platform_set_drvdata(pdev, port);
-	port->handle_rx = console ? handle_rx_console : handle_rx_uart;
-	if (!console)
-		device_create_file(uport->dev, &dev_attr_loopback);
-	return uart_add_one_port(drv, uport);
+
+	return 0;
 }
 
 static int qcom_geni_serial_remove(struct platform_device *pdev)
@@ -1353,7 +1332,10 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
 	struct qcom_geni_serial_port *port = platform_get_drvdata(pdev);
 	struct uart_driver *drv = port->uport.private_data;
 
+	dev_pm_clear_wake_irq(&pdev->dev);
+	device_init_wakeup(&pdev->dev, false);
 	uart_remove_one_port(drv, &port->uport);
+
 	return 0;
 }
 
@@ -1362,12 +1344,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	uart_suspend_port(uport->private_data, uport);
-
-	if (port->wakeup_irq > 0)
-		enable_irq(port->wakeup_irq);
-
-	return 0;
+	return uart_suspend_port(uport->private_data, uport);
 }
 
 static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
@@ -1375,9 +1352,6 @@ static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
 	struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
 	struct uart_port *uport = &port->uport;
 
-	if (port->wakeup_irq > 0)
-		disable_irq(port->wakeup_irq);
-
 	return uart_resume_port(uport->private_data, uport);
 }
 
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index 8e618129e65c..75c2a22895f9 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -7,10 +7,6 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd.
  */
 
-#if defined(CONFIG_SERIAL_SA1100_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -214,9 +210,7 @@ sa1100_rx_chars(struct sa1100_port *sport)
 			else if (status & UTSR1_TO_SM(UTSR1_FRE))
 				flg = TTY_FRAME;
 
-#ifdef SUPPORT_SYSRQ
 			sport->port.sysrq = 0;
-#endif
 		}
 
 		if (uart_handle_sysrq_char(&sport->port, ch))
@@ -860,6 +854,7 @@ static int sa1100_serial_resume(struct platform_device *dev)
 static int sa1100_serial_add_one_port(struct sa1100_port *sport, struct platform_device *dev)
 {
 	sport->port.dev = &dev->dev;
+	sport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SA1100_CONSOLE);
 
 	// mctrl_gpio_init() requires that the GPIO driver supports interrupts,
 	// but we need to support GPIO drivers for hardware that has no such
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
deleted file mode 100644
index f93022113f59..000000000000
--- a/drivers/tty/serial/samsung.h
+++ /dev/null
@@ -1,147 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#ifndef __SAMSUNG_H
-#define __SAMSUNG_H
-
-/*
- * Driver for Samsung SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
-*/
-
-#include <linux/dmaengine.h>
-
-struct s3c24xx_uart_info {
-	char			*name;
-	unsigned int		type;
-	unsigned int		fifosize;
-	unsigned long		rx_fifomask;
-	unsigned long		rx_fifoshift;
-	unsigned long		rx_fifofull;
-	unsigned long		tx_fifomask;
-	unsigned long		tx_fifoshift;
-	unsigned long		tx_fifofull;
-	unsigned int		def_clk_sel;
-	unsigned long		num_clks;
-	unsigned long		clksel_mask;
-	unsigned long		clksel_shift;
-
-	/* uart port features */
-
-	unsigned int		has_divslot:1;
-
-	/* uart controls */
-	int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
-};
-
-struct s3c24xx_serial_drv_data {
-	struct s3c24xx_uart_info	*info;
-	struct s3c2410_uartcfg		*def_cfg;
-	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
-};
-
-struct s3c24xx_uart_dma {
-	unsigned int			rx_chan_id;
-	unsigned int			tx_chan_id;
-
-	struct dma_slave_config		rx_conf;
-	struct dma_slave_config		tx_conf;
-
-	struct dma_chan			*rx_chan;
-	struct dma_chan			*tx_chan;
-
-	dma_addr_t			rx_addr;
-	dma_addr_t			tx_addr;
-
-	dma_cookie_t			rx_cookie;
-	dma_cookie_t			tx_cookie;
-
-	char				*rx_buf;
-
-	dma_addr_t			tx_transfer_addr;
-
-	size_t				rx_size;
-	size_t				tx_size;
-
-	struct dma_async_tx_descriptor	*tx_desc;
-	struct dma_async_tx_descriptor	*rx_desc;
-
-	int				tx_bytes_requested;
-	int				rx_bytes_requested;
-};
-
-struct s3c24xx_uart_port {
-	unsigned char			rx_claimed;
-	unsigned char			tx_claimed;
-	unsigned int			pm_level;
-	unsigned long			baudclk_rate;
-	unsigned int			min_dma_size;
-
-	unsigned int			rx_irq;
-	unsigned int			tx_irq;
-
-	unsigned int			tx_in_progress;
-	unsigned int			tx_mode;
-	unsigned int			rx_mode;
-
-	struct s3c24xx_uart_info	*info;
-	struct clk			*clk;
-	struct clk			*baudclk;
-	struct uart_port		port;
-	struct s3c24xx_serial_drv_data	*drv_data;
-
-	/* reference to platform data */
-	struct s3c2410_uartcfg		*cfg;
-
-	struct s3c24xx_uart_dma		*dma;
-
-#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
-	struct notifier_block		freq_transition;
-#endif
-};
-
-/* conversion functions */
-
-#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
-
-/* register access controls */
-
-#define portaddr(port, reg) ((port)->membase + (reg))
-#define portaddrl(port, reg) \
-	((unsigned long *)(unsigned long)((port)->membase + (reg)))
-
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
-#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
-
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
-#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
-
-/* Byte-order aware bit setting/clearing functions. */
-
-static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
-				   unsigned int reg)
-{
-	unsigned long flags;
-	u32 val;
-
-	local_irq_save(flags);
-	val = rd_regl(port, reg);
-	val |= (1 << idx);
-	wr_regl(port, reg, val);
-	local_irq_restore(flags);
-}
-
-static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
-				     unsigned int reg)
-{
-	unsigned long flags;
-	u32 val;
-
-	local_irq_save(flags);
-	val = rd_regl(port, reg);
-	val &= ~(1 << idx);
-	wr_regl(port, reg, val);
-	local_irq_restore(flags);
-}
-
-#endif
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 83fd51607741..73f951d65b93 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -4,7 +4,7 @@
  *
  * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
-*/
+ */
 
 /* Hote on 2410 error handling
  *
@@ -19,11 +19,7 @@
  * and change the policy on BREAK
  *
  * BJD, 04-Nov-2004
-*/
-
-#if defined(CONFIG_SERIAL_SAMSUNG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
+ */
 
 #include <linux/dmaengine.h>
 #include <linux/dma-mapping.h>
@@ -44,33 +40,8 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/of.h>
-
 #include <asm/irq.h>
 
-#include "samsung.h"
-
-#if	defined(CONFIG_SERIAL_SAMSUNG_DEBUG) &&	\
-	!defined(MODULE)
-
-extern void printascii(const char *);
-
-__printf(1, 2)
-static void dbg(const char *fmt, ...)
-{
-	va_list va;
-	char buff[256];
-
-	va_start(va, fmt);
-	vscnprintf(buff, sizeof(buff), fmt, va);
-	va_end(va);
-
-	printascii(buff);
-}
-
-#else
-#define dbg(fmt, ...) do { if (0) no_printk(fmt, ##__VA_ARGS__); } while (0)
-#endif
-
 /* UART name and device definitions */
 
 #define S3C24XX_SERIAL_NAME	"ttySAC"
@@ -81,14 +52,142 @@ static void dbg(const char *fmt, ...)
 #define S3C24XX_TX_DMA			2
 #define S3C24XX_RX_PIO			1
 #define S3C24XX_RX_DMA			2
-/* macros to change one thing to another */
-
-#define tx_enabled(port) ((port)->unused[0])
-#define rx_enabled(port) ((port)->unused[1])
 
 /* flag to ignore all characters coming in */
 #define RXSTAT_DUMMY_READ (0x10000000)
 
+struct s3c24xx_uart_info {
+	char			*name;
+	unsigned int		type;
+	unsigned int		fifosize;
+	unsigned long		rx_fifomask;
+	unsigned long		rx_fifoshift;
+	unsigned long		rx_fifofull;
+	unsigned long		tx_fifomask;
+	unsigned long		tx_fifoshift;
+	unsigned long		tx_fifofull;
+	unsigned int		def_clk_sel;
+	unsigned long		num_clks;
+	unsigned long		clksel_mask;
+	unsigned long		clksel_shift;
+
+	/* uart port features */
+
+	unsigned int		has_divslot:1;
+};
+
+struct s3c24xx_serial_drv_data {
+	struct s3c24xx_uart_info	*info;
+	struct s3c2410_uartcfg		*def_cfg;
+	unsigned int			fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
+struct s3c24xx_uart_dma {
+	unsigned int			rx_chan_id;
+	unsigned int			tx_chan_id;
+
+	struct dma_slave_config		rx_conf;
+	struct dma_slave_config		tx_conf;
+
+	struct dma_chan			*rx_chan;
+	struct dma_chan			*tx_chan;
+
+	dma_addr_t			rx_addr;
+	dma_addr_t			tx_addr;
+
+	dma_cookie_t			rx_cookie;
+	dma_cookie_t			tx_cookie;
+
+	char				*rx_buf;
+
+	dma_addr_t			tx_transfer_addr;
+
+	size_t				rx_size;
+	size_t				tx_size;
+
+	struct dma_async_tx_descriptor	*tx_desc;
+	struct dma_async_tx_descriptor	*rx_desc;
+
+	int				tx_bytes_requested;
+	int				rx_bytes_requested;
+};
+
+struct s3c24xx_uart_port {
+	unsigned char			rx_claimed;
+	unsigned char			tx_claimed;
+	unsigned char			rx_enabled;
+	unsigned char			tx_enabled;
+	unsigned int			pm_level;
+	unsigned long			baudclk_rate;
+	unsigned int			min_dma_size;
+
+	unsigned int			rx_irq;
+	unsigned int			tx_irq;
+
+	unsigned int			tx_in_progress;
+	unsigned int			tx_mode;
+	unsigned int			rx_mode;
+
+	struct s3c24xx_uart_info	*info;
+	struct clk			*clk;
+	struct clk			*baudclk;
+	struct uart_port		port;
+	struct s3c24xx_serial_drv_data	*drv_data;
+
+	/* reference to platform data */
+	struct s3c2410_uartcfg		*cfg;
+
+	struct s3c24xx_uart_dma		*dma;
+
+#ifdef CONFIG_ARM_S3C24XX_CPUFREQ
+	struct notifier_block		freq_transition;
+#endif
+};
+
+/* conversion functions */
+
+#define s3c24xx_dev_to_port(__dev) dev_get_drvdata(__dev)
+
+/* register access controls */
+
+#define portaddr(port, reg) ((port)->membase + (reg))
+#define portaddrl(port, reg) \
+	((unsigned long *)(unsigned long)((port)->membase + (reg)))
+
+#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
+
+#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
+
+/* Byte-order aware bit setting/clearing functions. */
+
+static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
+				   unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val |= (1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
+static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
+				     unsigned int reg)
+{
+	unsigned long flags;
+	u32 val;
+
+	local_irq_save(flags);
+	val = rd_regl(port, reg);
+	val &= ~(1 << idx);
+	wr_regl(port, reg, val);
+	local_irq_restore(flags);
+}
+
 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
 {
 	return container_of(port, struct s3c24xx_uart_port, port);
@@ -118,6 +217,7 @@ static int s3c24xx_serial_has_interrupt_mask(struct uart_port *port)
 
 static void s3c24xx_serial_rx_enable(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	unsigned long flags;
 	unsigned int ucon, ufcon;
 	int count = 10000;
@@ -135,12 +235,13 @@ static void s3c24xx_serial_rx_enable(struct uart_port *port)
 	ucon |= S3C2410_UCON_RXIRQMODE;
 	wr_regl(port, S3C2410_UCON, ucon);
 
-	rx_enabled(port) = 1;
+	ourport->rx_enabled = 1;
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
 static void s3c24xx_serial_rx_disable(struct uart_port *port)
 {
+	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	unsigned long flags;
 	unsigned int ucon;
 
@@ -150,7 +251,7 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port)
 	ucon &= ~S3C2410_UCON_RXIRQMODE;
 	wr_regl(port, S3C2410_UCON, ucon);
 
-	rx_enabled(port) = 0;
+	ourport->rx_enabled = 0;
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -162,7 +263,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 	struct dma_tx_state state;
 	int count;
 
-	if (!tx_enabled(port))
+	if (!ourport->tx_enabled)
 		return;
 
 	if (s3c24xx_serial_has_interrupt_mask(port))
@@ -182,7 +283,7 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port)
 		port->icount.tx += count;
 	}
 
-	tx_enabled(port) = 0;
+	ourport->tx_enabled = 0;
 	ourport->tx_in_progress = 0;
 
 	if (port->flags & UPF_CONS_FLOW)
@@ -340,11 +441,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	struct circ_buf *xmit = &port->state->xmit;
 
-	if (!tx_enabled(port)) {
+	if (!ourport->tx_enabled) {
 		if (port->flags & UPF_CONS_FLOW)
 			s3c24xx_serial_rx_disable(port);
 
-		tx_enabled(port) = 1;
+		ourport->tx_enabled = 1;
 		if (!ourport->dma || !ourport->dma->tx_chan)
 			s3c24xx_serial_start_tx_pio(ourport);
 	}
@@ -389,14 +490,14 @@ static void s3c24xx_serial_stop_rx(struct uart_port *port)
 	enum dma_status dma_status;
 	unsigned int received;
 
-	if (rx_enabled(port)) {
-		dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
+	if (ourport->rx_enabled) {
+		dev_dbg(port->dev, "stopping rx\n");
 		if (s3c24xx_serial_has_interrupt_mask(port))
 			s3c24xx_set_bit(port, S3C64XX_UINTM_RXD,
 					S3C64XX_UINTM);
 		else
 			disable_irq_nosync(ourport->rx_irq);
-		rx_enabled(port) = 0;
+		ourport->rx_enabled = 0;
 	}
 	if (dma && dma->rx_chan) {
 		dmaengine_pause(dma->tx_chan);
@@ -546,7 +647,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport);
 
 static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
 {
-	unsigned int utrstat, ufstat, received;
+	unsigned int utrstat, received;
 	struct s3c24xx_uart_port *ourport = dev_id;
 	struct uart_port *port = &ourport->port;
 	struct s3c24xx_uart_dma *dma = ourport->dma;
@@ -556,7 +657,7 @@ static irqreturn_t s3c24xx_serial_rx_chars_dma(void *dev_id)
 	struct dma_tx_state state;
 
 	utrstat = rd_regl(port, S3C2410_UTRSTAT);
-	ufstat = rd_regl(port, S3C2410_UFSTAT);
+	rd_regl(port, S3C2410_UFSTAT);
 
 	spin_lock_irqsave(&port->lock, flags);
 
@@ -618,9 +719,9 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		if (port->flags & UPF_CONS_FLOW) {
 			int txe = s3c24xx_serial_txempty_nofifo(port);
 
-			if (rx_enabled(port)) {
+			if (ourport->rx_enabled) {
 				if (!txe) {
-					rx_enabled(port) = 0;
+					ourport->rx_enabled = 0;
 					continue;
 				}
 			} else {
@@ -628,7 +729,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 					ufcon = rd_regl(port, S3C2410_UFCON);
 					ufcon |= S3C2410_UFCON_RESETRX;
 					wr_regl(port, S3C2410_UFCON, ufcon);
-					rx_enabled(port) = 1;
+					ourport->rx_enabled = 1;
 					return;
 				}
 				continue;
@@ -641,12 +742,13 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
 		port->icount.rx++;
 
 		if (unlikely(uerstat & S3C2410_UERSTAT_ANY)) {
-			dbg("rxerr: port ch=0x%02x, rxs=0x%08x\n",
-			    ch, uerstat);
+			dev_dbg(port->dev,
+				"rxerr: port ch=0x%02x, rxs=0x%08x\n",
+				ch, uerstat);
 
 			/* check for break */
 			if (uerstat & S3C2410_UERSTAT_BREAK) {
-				dbg("break!\n");
+				dev_dbg(port->dev, "break!\n");
 				port->icount.brk++;
 				if (uart_handle_break(port))
 					continue; /* Ignore character */
@@ -732,7 +834,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
 
 	/* if there isn't anything more to transmit, or the uart is now
 	 * stopped, disable the uart and exit
-	*/
+	 */
 
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		s3c24xx_serial_stop_tx(port);
@@ -978,7 +1080,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 	if (ourport->tx_claimed) {
 		if (!s3c24xx_serial_has_interrupt_mask(port))
 			free_irq(ourport->tx_irq, ourport);
-		tx_enabled(port) = 0;
+		ourport->tx_enabled = 0;
 		ourport->tx_claimed = 0;
 		ourport->tx_mode = 0;
 	}
@@ -987,7 +1089,7 @@ static void s3c24xx_serial_shutdown(struct uart_port *port)
 		if (!s3c24xx_serial_has_interrupt_mask(port))
 			free_irq(ourport->rx_irq, ourport);
 		ourport->rx_claimed = 0;
-		rx_enabled(port) = 0;
+		ourport->rx_enabled = 0;
 	}
 
 	/* Clear pending interrupts and mask all interrupts */
@@ -1009,10 +1111,7 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 	struct s3c24xx_uart_port *ourport = to_ourport(port);
 	int ret;
 
-	dbg("s3c24xx_serial_startup: port=%p (%08llx,%p)\n",
-	    port, (unsigned long long)port->mapbase, port->membase);
-
-	rx_enabled(port) = 1;
+	ourport->rx_enabled = 1;
 
 	ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
@@ -1024,9 +1123,9 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	ourport->rx_claimed = 1;
 
-	dbg("requesting tx irq...\n");
+	dev_dbg(port->dev, "requesting tx irq...\n");
 
-	tx_enabled(port) = 1;
+	ourport->tx_enabled = 1;
 
 	ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0,
 			  s3c24xx_serial_portname(port), ourport);
@@ -1038,10 +1137,9 @@ static int s3c24xx_serial_startup(struct uart_port *port)
 
 	ourport->tx_claimed = 1;
 
-	dbg("s3c24xx_serial_startup ok\n");
-
 	/* the port reset code should have done the correct
-	 * register setup for the port controls */
+	 * register setup for the port controls
+	 */
 
 	return ret;
 
@@ -1057,9 +1155,6 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	unsigned int ufcon;
 	int ret;
 
-	dbg("s3c64xx_serial_startup: port=%p (%08llx,%p)\n",
-	    port, (unsigned long long)port->mapbase, port->membase);
-
 	wr_regl(port, S3C64XX_UINTM, 0xf);
 	if (ourport->dma) {
 		ret = s3c24xx_serial_request_dma(ourport);
@@ -1077,9 +1172,9 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	}
 
 	/* For compatibility with s3c24xx Soc's */
-	rx_enabled(port) = 1;
+	ourport->rx_enabled = 1;
 	ourport->rx_claimed = 1;
-	tx_enabled(port) = 0;
+	ourport->tx_enabled = 0;
 	ourport->tx_claimed = 1;
 
 	spin_lock_irqsave(&port->lock, flags);
@@ -1097,7 +1192,6 @@ static int s3c64xx_serial_startup(struct uart_port *port)
 	/* Enable Rx Interrupt */
 	s3c24xx_clear_bit(port, S3C64XX_UINTM_RXD, S3C64XX_UINTM);
 
-	dbg("s3c64xx_serial_startup ok\n");
 	return ret;
 }
 
@@ -1145,7 +1239,7 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
  * baud clocks (and the resultant actual baud rates) and then tries to
  * pick the closest one and select that.
  *
-*/
+ */
 
 #define MAX_CLK_NAME_LENGTH 15
 
@@ -1315,29 +1409,30 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		if (cfg->has_fracval) {
 			udivslot = (div & 15);
-			dbg("fracval = %04x\n", udivslot);
+			dev_dbg(port->dev, "fracval = %04x\n", udivslot);
 		} else {
 			udivslot = udivslot_table[div & 15];
-			dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+			dev_dbg(port->dev, "udivslot = %04x (div %d)\n",
+				udivslot, div & 15);
 		}
 	}
 
 	switch (termios->c_cflag & CSIZE) {
 	case CS5:
-		dbg("config: 5bits/char\n");
+		dev_dbg(port->dev, "config: 5bits/char\n");
 		ulcon = S3C2410_LCON_CS5;
 		break;
 	case CS6:
-		dbg("config: 6bits/char\n");
+		dev_dbg(port->dev, "config: 6bits/char\n");
 		ulcon = S3C2410_LCON_CS6;
 		break;
 	case CS7:
-		dbg("config: 7bits/char\n");
+		dev_dbg(port->dev, "config: 7bits/char\n");
 		ulcon = S3C2410_LCON_CS7;
 		break;
 	case CS8:
 	default:
-		dbg("config: 8bits/char\n");
+		dev_dbg(port->dev, "config: 8bits/char\n");
 		ulcon = S3C2410_LCON_CS8;
 		break;
 	}
@@ -1359,8 +1454,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 	spin_lock_irqsave(&port->lock, flags);
 
-	dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
-	    ulcon, quot, udivslot);
+	dev_dbg(port->dev,
+		"setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+		ulcon, quot, udivslot);
 
 	wr_regl(port, S3C2410_ULCON, ulcon);
 	wr_regl(port, S3C2410_UBRDIV, quot);
@@ -1381,10 +1477,11 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 	if (ourport->info->has_divslot)
 		wr_regl(port, S3C2443_DIVSLOT, udivslot);
 
-	dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
-	    rd_regl(port, S3C2410_ULCON),
-	    rd_regl(port, S3C2410_UCON),
-	    rd_regl(port, S3C2410_UFCON));
+	dev_dbg(port->dev,
+		"uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
+		rd_regl(port, S3C2410_ULCON),
+		rd_regl(port, S3C2410_UCON),
+		rd_regl(port, S3C2410_UFCON));
 
 	/*
 	 * Update the per-port timeout.
@@ -1442,6 +1539,7 @@ static void s3c24xx_serial_release_port(struct uart_port *port)
 static int s3c24xx_serial_request_port(struct uart_port *port)
 {
 	const char *name = s3c24xx_serial_portname(port);
+
 	return request_mem_region(port->mapbase, MAP_SIZE, name) ? 0 : -EBUSY;
 }
 
@@ -1583,7 +1681,7 @@ s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
 /* s3c24xx_serial_resetport
  *
  * reset the fifos and other the settings.
-*/
+ */
 
 static void s3c24xx_serial_resetport(struct uart_port *port,
 				   struct s3c2410_uartcfg *cfg)
@@ -1637,7 +1735,8 @@ static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb,
 
 	if (val == CPUFREQ_PRECHANGE) {
 		/* we should really shut the port down whilst the
-		 * frequency change is in progress. */
+		 * frequency change is in progress.
+		 */
 
 	} else if (val == CPUFREQ_POSTCHANGE) {
 		struct ktermios *termios;
@@ -1743,8 +1842,6 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	struct resource *res;
 	int ret;
 
-	dbg("s3c24xx_serial_init_port: port=%p, platdev=%p\n", port, platdev);
-
 	if (platdev == NULL)
 		return -ENODEV;
 
@@ -1761,7 +1858,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	port->uartclk = 1;
 
 	if (cfg->uart_flags & UPF_CONS_FLOW) {
-		dbg("s3c24xx_serial_init_port: enabling flow control\n");
+		dev_dbg(port->dev, "enabling flow control\n");
 		port->flags |= UPF_CONS_FLOW;
 	}
 
@@ -1773,7 +1870,7 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		return -EINVAL;
 	}
 
-	dbg("resource %pR)\n", res);
+	dev_dbg(port->dev, "resource %pR)\n", res);
 
 	port->membase = devm_ioremap(port->dev, res->start, resource_size(res));
 	if (!port->membase) {
@@ -1835,9 +1932,9 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 		wr_regl(port, S3C64XX_UINTSP, 0xf);
 	}
 
-	dbg("port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
-	    &port->mapbase, port->membase, port->irq,
-	    ourport->rx_irq, ourport->tx_irq, port->uartclk);
+	dev_dbg(port->dev, "port: map=%pa, mem=%p, irq=%d (%d,%d), clock=%u\n",
+		&port->mapbase, port->membase, port->irq,
+		ourport->rx_irq, ourport->tx_irq, port->uartclk);
 
 	/* reset the fifos (and setup the uart) */
 	s3c24xx_serial_resetport(port, cfg);
@@ -1851,7 +1948,10 @@ err:
 
 /* Device driver serial port probe */
 
+#ifdef CONFIG_OF
 static const struct of_device_id s3c24xx_uart_dt_match[];
+#endif
+
 static int probe_index;
 
 static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
@@ -1860,6 +1960,7 @@ static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
 #ifdef CONFIG_OF
 	if (pdev->dev.of_node) {
 		const struct of_device_id *match;
+
 		match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
 		return (struct s3c24xx_serial_drv_data *)match->data;
 	}
@@ -1881,8 +1982,6 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 			index = ret;
 	}
 
-	dbg("s3c24xx_serial_probe(%p) %d\n", pdev, index);
-
 	if (index >= ARRAY_SIZE(s3c24xx_serial_ports)) {
 		dev_err(&pdev->dev, "serial%d out of range\n", index);
 		return -EINVAL;
@@ -1909,6 +2008,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 		ourport->port.fifosize = ourport->drv_data->fifosize[index];
 	else if (ourport->info->fifosize)
 		ourport->port.fifosize = ourport->info->fifosize;
+	ourport->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SAMSUNG_CONSOLE);
 
 	/*
 	 * DMA transfers must be aligned at least to cache line size,
@@ -1917,7 +2017,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	ourport->min_dma_size = max_t(int, ourport->port.fifosize,
 				    dma_get_cache_alignment());
 
-	dbg("%s: initialising port %p...\n", __func__, ourport);
+	dev_dbg(&pdev->dev, "%s: initialising port %p...\n", __func__, ourport);
 
 	ret = s3c24xx_serial_init_port(ourport, pdev);
 	if (ret < 0)
@@ -1931,7 +2031,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 		}
 	}
 
-	dbg("%s: adding port\n", __func__);
+	dev_dbg(&pdev->dev, "%s: adding port\n", __func__);
 	uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
 	platform_set_drvdata(pdev, &ourport->port);
 
@@ -2008,9 +2108,10 @@ static int s3c24xx_serial_resume_noirq(struct device *dev)
 		/* restore IRQ mask */
 		if (s3c24xx_serial_has_interrupt_mask(port)) {
 			unsigned int uintm = 0xf;
-			if (tx_enabled(port))
+
+			if (ourport->tx_enabled)
 				uintm &= ~S3C64XX_UINTM_TXD_MSK;
-			if (rx_enabled(port))
+			if (ourport->rx_enabled)
 				uintm &= ~S3C64XX_UINTM_RXD_MSK;
 			clk_prepare_enable(ourport->clk);
 			if (!IS_ERR(ourport->baudclk))
@@ -2143,10 +2244,6 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 	ucon   = rd_regl(port, S3C2410_UCON);
 	ubrdiv = rd_regl(port, S3C2410_UBRDIV);
 
-	dbg("s3c24xx_serial_get_options: port=%p\n"
-	    "registers: ulcon=%08x, ucon=%08x, ubdriv=%08x\n",
-	    port, ulcon, ucon, ubrdiv);
-
 	if (s3c24xx_port_configured(ucon)) {
 		switch (ulcon & S3C2410_LCON_CSMASK) {
 		case S3C2410_LCON_CS5:
@@ -2190,7 +2287,7 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud,
 			rate = 1;
 
 		*baud = rate / (16 * (ubrdiv + 1));
-		dbg("calculated baud %d\n", *baud);
+		dev_dbg(port->dev, "calculated baud %d\n", *baud);
 	}
 
 }
@@ -2204,9 +2301,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 	int parity = 'n';
 	int flow = 'n';
 
-	dbg("s3c24xx_serial_console_setup: co=%p (%d), %s\n",
-	    co, co->index, options);
-
 	/* is this a valid port */
 
 	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
@@ -2221,8 +2315,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	cons_uart = port;
 
-	dbg("s3c24xx_serial_console_setup: port=%p (%d)\n", port, co->index);
-
 	/*
 	 * Check whether an invalid uart number has been specified, and
 	 * if so, search for the first available port that does have
@@ -2233,7 +2325,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 	else
 		s3c24xx_serial_get_options(port, &baud, &parity, &bits);
 
-	dbg("s3c24xx_serial_console_setup: baud %d\n", baud);
+	dev_dbg(port->dev, "baud %d\n", baud);
 
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
@@ -2523,7 +2615,8 @@ static void samsung_early_putc(struct uart_port *port, int c)
 	writeb(c, port->membase + S3C2410_UTXH);
 }
 
-static void samsung_early_write(struct console *con, const char *s, unsigned n)
+static void samsung_early_write(struct console *con, const char *s,
+				unsigned int n)
 {
 	struct earlycon_device *dev = con->data;
 
@@ -2572,7 +2665,7 @@ OF_EARLYCON_DECLARE(s3c2440, "samsung,s3c2440-uart",
 OF_EARLYCON_DECLARE(s3c6400, "samsung,s3c6400-uart",
 			s3c2440_early_console_setup);
 
-/* S5PV210, EXYNOS */
+/* S5PV210, Exynos */
 static struct samsung_early_console_data s5pv210_early_console_data = {
 	.txfull_mask = S5PV210_UFSTAT_TXFULL,
 };
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 7c99340a3d66..bd5e7e9938ce 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -15,10 +15,6 @@
  *	"BCM1250/BCM1125/BCM1125H User Manual", Broadcom Corporation
  */
 
-#if defined(CONFIG_SERIAL_SB1250_DUART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/compiler.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -813,6 +809,7 @@ static void __init sbd_probe_duarts(void)
 			uport->ops	= &sbd_ops;
 			uport->line	= line;
 			uport->mapbase	= SBD_CHANREGS(line);
+			uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SB1250_DUART_CONSOLE);
 		}
 	}
 }
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index d2b77aae42ae..10cc16a71f26 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -7,10 +7,6 @@
  *  Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de)
  */
 
-#if defined(CONFIG_SERIAL_SCCNXP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/err.h>
@@ -1000,6 +996,7 @@ static int sccnxp_probe(struct platform_device *pdev)
 		s->port[i].regshift	= s->pdata.reg_shift;
 		s->port[i].uartclk	= uartclk;
 		s->port[i].ops		= &sccnxp_ops;
+		s->port[i].has_sysrq = IS_ENABLED(CONFIG_SERIAL_SCCNXP_CONSOLE);
 		uart_add_one_port(&s->uart, &s->port[i]);
 		/* Set direction to input */
 		if (s->chip->flags & SCCNXP_HAVE_IO)
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index b6ace6290e23..33034b852a51 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -141,6 +141,7 @@ struct tegra_uart_port {
 	int					configured_rate;
 	bool					use_rx_pio;
 	bool					use_tx_pio;
+	bool					rx_dma_active;
 };
 
 static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
@@ -533,11 +534,12 @@ static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
 	struct circ_buf *xmit = &tup->uport.state->xmit;
 	dma_addr_t tx_phys_addr;
 
-	dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys,
-				UART_XMIT_SIZE, DMA_TO_DEVICE);
-
 	tup->tx_bytes = count & ~(0xF);
 	tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail;
+
+	dma_sync_single_for_device(tup->uport.dev, tx_phys_addr,
+				   tup->tx_bytes, DMA_TO_DEVICE);
+
 	tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan,
 				tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT);
@@ -679,7 +681,7 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
 		return;
 
 	dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
-				TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+				count, DMA_FROM_DEVICE);
 	copied = tty_insert_flip_string(tty,
 			((unsigned char *)(tup->rx_dma_buf_virt)), count);
 	if (copied != count) {
@@ -687,7 +689,7 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
 		dev_err(tup->uport.dev, "RxData copy to tty layer failed\n");
 	}
 	dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
-				TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+				   count, DMA_TO_DEVICE);
 }
 
 static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
@@ -731,6 +733,7 @@ static void tegra_uart_rx_dma_complete(void *args)
 	if (tup->rts_active)
 		set_rts(tup, false);
 
+	tup->rx_dma_active = false;
 	tegra_uart_rx_buffer_push(tup, 0);
 	tegra_uart_start_rx_dma(tup);
 
@@ -742,18 +745,27 @@ done:
 	spin_unlock_irqrestore(&u->lock, flags);
 }
 
-static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
+static void tegra_uart_terminate_rx_dma(struct tegra_uart_port *tup)
 {
 	struct dma_tx_state state;
 
-	/* Deactivate flow control to stop sender */
-	if (tup->rts_active)
-		set_rts(tup, false);
+	if (!tup->rx_dma_active)
+		return;
 
 	dmaengine_terminate_all(tup->rx_dma_chan);
 	dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+
 	tegra_uart_rx_buffer_push(tup, state.residue);
-	tegra_uart_start_rx_dma(tup);
+	tup->rx_dma_active = false;
+}
+
+static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
+{
+	/* Deactivate flow control to stop sender */
+	if (tup->rts_active)
+		set_rts(tup, false);
+
+	tegra_uart_terminate_rx_dma(tup);
 
 	if (tup->rts_active)
 		set_rts(tup, true);
@@ -763,6 +775,9 @@ static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup)
 {
 	unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE;
 
+	if (tup->rx_dma_active)
+		return 0;
+
 	tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan,
 				tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT);
@@ -771,10 +786,9 @@ static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup)
 		return -EIO;
 	}
 
+	tup->rx_dma_active = true;
 	tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete;
 	tup->rx_dma_desc->callback_param = tup;
-	dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
-				count, DMA_TO_DEVICE);
 	tup->rx_bytes_requested = count;
 	tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc);
 	dma_async_issue_pending(tup->rx_dma_chan);
@@ -820,6 +834,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
 	struct uart_port *u = &tup->uport;
 	unsigned long iir;
 	unsigned long ier;
+	bool is_rx_start = false;
 	bool is_rx_int = false;
 	unsigned long flags;
 
@@ -832,10 +847,12 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
 				if (tup->rx_in_progress) {
 					ier = tup->ier_shadow;
 					ier |= (UART_IER_RLSI | UART_IER_RTOIE |
-						TEGRA_UART_IER_EORD);
+						TEGRA_UART_IER_EORD | UART_IER_RDI);
 					tup->ier_shadow = ier;
 					tegra_uart_write(tup, ier, UART_IER);
 				}
+			} else if (is_rx_start) {
+				tegra_uart_start_rx_dma(tup);
 			}
 			spin_unlock_irqrestore(&u->lock, flags);
 			return IRQ_HANDLED;
@@ -854,17 +871,23 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
 
 		case 4: /* End of data */
 		case 6: /* Rx timeout */
-		case 2: /* Receive */
-			if (!tup->use_rx_pio && !is_rx_int) {
-				is_rx_int = true;
+			if (!tup->use_rx_pio) {
+				is_rx_int = tup->rx_in_progress;
 				/* Disable Rx interrupts */
 				ier = tup->ier_shadow;
-				ier |= UART_IER_RDI;
-				tegra_uart_write(tup, ier, UART_IER);
 				ier &= ~(UART_IER_RDI | UART_IER_RLSI |
 					UART_IER_RTOIE | TEGRA_UART_IER_EORD);
 				tup->ier_shadow = ier;
 				tegra_uart_write(tup, ier, UART_IER);
+				break;
+			}
+			/* Fall through */
+		case 2: /* Receive */
+			if (!tup->use_rx_pio) {
+				is_rx_start = tup->rx_in_progress;
+				tup->ier_shadow  &= ~UART_IER_RDI;
+				tegra_uart_write(tup, tup->ier_shadow,
+						 UART_IER);
 			} else {
 				do_handle_rx_pio(tup);
 			}
@@ -886,7 +909,6 @@ static void tegra_uart_stop_rx(struct uart_port *u)
 {
 	struct tegra_uart_port *tup = to_tegra_uport(u);
 	struct tty_port *port = &tup->uport.state->port;
-	struct dma_tx_state state;
 	unsigned long ier;
 
 	if (tup->rts_active)
@@ -903,13 +925,11 @@ static void tegra_uart_stop_rx(struct uart_port *u)
 	tup->ier_shadow = ier;
 	tegra_uart_write(tup, ier, UART_IER);
 	tup->rx_in_progress = 0;
-	if (tup->rx_dma_chan && !tup->use_rx_pio) {
-		dmaengine_terminate_all(tup->rx_dma_chan);
-		dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
-		tegra_uart_rx_buffer_push(tup, state.residue);
-	} else {
+
+	if (!tup->use_rx_pio)
+		tegra_uart_terminate_rx_dma(tup);
+	else
 		tegra_uart_handle_rx_pio(tup, port);
-	}
 }
 
 static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
@@ -1052,12 +1072,6 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 		tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
 		tup->fcr_shadow |= UART_FCR_DMA_SELECT;
 		tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
-
-		ret = tegra_uart_start_rx_dma(tup);
-		if (ret < 0) {
-			dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
-			return ret;
-		}
 	} else {
 		tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
 	}
@@ -1067,10 +1081,6 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 * Enable IE_RXS for the receive status interrupts like line errros.
 	 * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd.
 	 *
-	 * If using DMA mode, enable EORD instead of receive interrupt which
-	 * will interrupt after the UART is done with the receive instead of
-	 * the interrupt when the FIFO "threshold" is reached.
-	 *
 	 * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when
 	 * the DATA is sitting in the FIFO and couldn't be transferred to the
 	 * DMA as the DMA size alignment (4 bytes) is not met. EORD will be
@@ -1081,11 +1091,14 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
 	 * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first
 	 * then the EORD.
 	 */
+	tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | UART_IER_RDI;
+
+	/*
+	 * If using DMA mode, enable EORD interrupt to notify about RX
+	 * completion.
+	 */
 	if (!tup->use_rx_pio)
-		tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE |
-			TEGRA_UART_IER_EORD;
-	else
-		tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | UART_IER_RDI;
+		tup->ier_shadow |= TEGRA_UART_IER_EORD;
 
 	tegra_uart_write(tup, tup->ier_shadow, UART_IER);
 	return 0;
@@ -1140,6 +1153,9 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
 			dma_release_channel(dma_chan);
 			return -ENOMEM;
 		}
+		dma_sync_single_for_device(tup->uport.dev, dma_phys,
+					   TEGRA_UART_RX_DMA_BUFFER_SIZE,
+					   DMA_TO_DEVICE);
 		dma_sconfig.src_addr = tup->uport.mapbase;
 		dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
 		dma_sconfig.src_maxburst = tup->cdata->max_dma_burst_bytes;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 7c2782785736..76e506ee335c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2603,6 +2603,7 @@ struct tty_driver *uart_console_device(struct console *co, int *index)
 	*index = co->index;
 	return p->tty_driver;
 }
+EXPORT_SYMBOL_GPL(uart_console_device);
 
 static ssize_t uart_get_attr_uartclk(struct device *dev,
 	struct device_attribute *attr, char *buf)
@@ -3081,6 +3082,89 @@ void uart_insert_char(struct uart_port *port, unsigned int status,
 }
 EXPORT_SYMBOL_GPL(uart_insert_char);
 
+int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+	if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
+		return 0;
+
+	if (!port->has_sysrq || !port->sysrq)
+		return 0;
+
+	if (ch && time_before(jiffies, port->sysrq)) {
+		handle_sysrq(ch);
+		port->sysrq = 0;
+		return 1;
+	}
+	port->sysrq = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_handle_sysrq_char);
+
+int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
+{
+	if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
+		return 0;
+
+	if (!port->has_sysrq || !port->sysrq)
+		return 0;
+
+	if (ch && time_before(jiffies, port->sysrq)) {
+		port->sysrq_ch = ch;
+		port->sysrq = 0;
+		return 1;
+	}
+	port->sysrq = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_prepare_sysrq_char);
+
+void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+{
+	int sysrq_ch;
+
+	if (!port->has_sysrq) {
+		spin_unlock_irqrestore(&port->lock, irqflags);
+		return;
+	}
+
+	sysrq_ch = port->sysrq_ch;
+	port->sysrq_ch = 0;
+
+	spin_unlock_irqrestore(&port->lock, irqflags);
+
+	if (sysrq_ch)
+		handle_sysrq(sysrq_ch);
+}
+EXPORT_SYMBOL_GPL(uart_unlock_and_check_sysrq);
+
+/*
+ * We do the SysRQ and SAK checking like this...
+ */
+int uart_handle_break(struct uart_port *port)
+{
+	struct uart_state *state = port->state;
+
+	if (port->handle_break)
+		port->handle_break(port);
+
+	if (port->has_sysrq) {
+		if (port->cons && port->cons->index == port->line) {
+			if (!port->sysrq) {
+				port->sysrq = jiffies + HZ*5;
+				return 1;
+			}
+			port->sysrq = 0;
+		}
+	}
+
+	if (port->flags & UPF_SAK)
+		do_SAK(state->port.tty);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(uart_handle_break);
+
 EXPORT_SYMBOL(uart_write_wakeup);
 EXPORT_SYMBOL(uart_register_driver);
 EXPORT_SYMBOL(uart_unregister_driver);
diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c
index d22ccb32aa9b..b4d89e31730e 100644
--- a/drivers/tty/serial/serial_txx9.c
+++ b/drivers/tty/serial/serial_txx9.c
@@ -12,10 +12,6 @@
  *  Serial driver for TX3927/TX4927/TX4925/TX4938 internal SIO controller
  */
 
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
@@ -1095,6 +1091,7 @@ static int serial_txx9_probe(struct platform_device *dev)
 		port.flags	= p->flags;
 		port.mapbase	= p->mapbase;
 		port.dev	= &dev->dev;
+		port.has_sysrq	= IS_ENABLED(CONFIG_SERIAL_TXX9_CONSOLE);
 		ret = serial_txx9_register_port(&port);
 		if (ret < 0) {
 			dev_err(&dev->dev, "unable to register port at index %d "
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 87ca6294de0e..c073aa7001c4 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -15,10 +15,6 @@
  *   Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
  *   Removed SH7300 support (Jul 2007).
  */
-#if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #undef DEBUG
 
 #include <linux/clk.h>
@@ -2887,6 +2883,7 @@ static int sci_init_single(struct platform_device *dev,
 	port->ops	= &sci_uart_ops;
 	port->iotype	= UPIO_MEM;
 	port->line	= index;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SH_SCI_CONSOLE);
 
 	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (res == NULL)
@@ -3015,12 +3012,9 @@ static void serial_console_write(struct console *co, const char *s,
 	unsigned long flags;
 	int locked = 1;
 
-#if defined(SUPPORT_SYSRQ)
 	if (port->sysrq)
 		locked = 0;
-	else
-#endif
-	if (oops_in_progress)
+	else if (oops_in_progress)
 		locked = spin_trylock_irqsave(&port->lock, flags);
 	else
 		spin_lock_irqsave(&port->lock, flags);
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index f60a59d9bf27..3d3c70634589 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -3,10 +3,6 @@
  * Copyright (C) 2012-2015 Spreadtrum Communications Inc.
  */
 
-#if defined(CONFIG_SERIAL_SPRD_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -1230,6 +1226,7 @@ static int sprd_probe(struct platform_device *pdev)
 	up->fifosize = SPRD_FIFO_SIZE;
 	up->ops = &serial_sprd_ops;
 	up->flags = UPF_BOOT_AUTOCONF;
+	up->has_sysrq = IS_ENABLED(CONFIG_SERIAL_SPRD_CONSOLE);
 
 	ret = sprd_clk_init(up);
 	if (ret)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index 7971997cdead..e7048515a79c 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -5,10 +5,6 @@
  * Copyright (C) 2003-2013 STMicroelectronics (R&D) Limited
  */
 
-#if defined(CONFIG_SERIAL_ST_ASC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/module.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -508,7 +504,6 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
 	struct asc_port *ascport = to_asc_port(port);
-	struct device_node *np = port->dev->of_node;
 	struct gpio_desc *gpiod;
 	unsigned int baud;
 	u32 ctrl_val;
@@ -570,13 +565,12 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios,
 			pinctrl_select_state(ascport->pinctrl,
 					     ascport->states[NO_HW_FLOWCTRL]);
 
-			gpiod = devm_fwnode_get_gpiod_from_child(port->dev,
-								 "rts",
-								 &np->fwnode,
-								 GPIOD_OUT_LOW,
-								 np->name);
-			if (!IS_ERR(gpiod))
+			gpiod = devm_gpiod_get(port->dev, "rts", GPIOD_OUT_LOW);
+			if (!IS_ERR(gpiod)) {
+				gpiod_set_consumer_name(gpiod,
+						port->dev->of_node->name);
 				ascport->rts = gpiod;
+			}
 		}
 	}
 
@@ -730,6 +724,7 @@ static int asc_init_port(struct asc_port *ascport,
 	port->fifosize	= ASC_FIFO_SIZE;
 	port->dev	= &pdev->dev;
 	port->irq	= platform_get_irq(pdev, 0);
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ST_ASC_CONSOLE);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	port->membase = devm_ioremap_resource(&pdev->dev, res);
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 2f72514d63ed..5e93e8d40f59 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -8,10 +8,6 @@
  * Inspired by st-asc.c from STMicroelectronics (c)
  */
 
-#if defined(CONFIG_SERIAL_STM32_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/clk.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -926,6 +922,7 @@ static int stm32_init_port(struct stm32_port *stm32port,
 	port->ops	= &stm32_uart_ops;
 	port->dev	= &pdev->dev;
 	port->fifosize	= stm32port->info->cfg.fifosize;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_STM32_CONSOLE);
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret <= 0)
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index f8503f8fc44e..eafada8fb6fa 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -25,10 +25,6 @@
 #include <asm/irq.h>
 #include <asm/setup.h>
 
-#if defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 #include <linux/sunserialcore.h>
 
@@ -552,6 +548,7 @@ static int hv_probe(struct platform_device *op)
 
 	sunhv_port = port;
 
+	port->has_sysrq = 1;
 	port->line = 0;
 	port->ops = &sunhv_pops;
 	port->type = PORT_SUNHV;
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 72131b5e132e..1eb703c980e0 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -40,10 +40,6 @@
 #include <asm/prom.h>
 #include <asm/setup.h>
 
-#if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 #include <linux/sunserialcore.h>
 
@@ -985,6 +981,7 @@ static int sunsab_init_one(struct uart_sunsab_port *up,
 
 	up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
 	up->port.iotype = UPIO_MEM;
+	up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSAB_CONSOLE);
 
 	writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
 
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 4db6aaa330b2..8ce9a7a256e5 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -44,10 +44,6 @@
 #include <asm/prom.h>
 #include <asm/setup.h>
 
-#if defined(CONFIG_SERIAL_SUNSU_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 #include <linux/sunserialcore.h>
 
@@ -1475,6 +1471,7 @@ static int su_probe(struct platform_device *op)
 
 	up->port.type = PORT_UNKNOWN;
 	up->port.uartclk = (SU_BASE_BAUD * 16);
+	up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE);
 
 	err = 0;
 	if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index bc7af8b08a72..103ab8c556e7 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -40,10 +40,6 @@
 #include <asm/prom.h>
 #include <asm/setup.h>
 
-#if defined(CONFIG_SERIAL_SUNZILOG_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/serial_core.h>
 #include <linux/sunserialcore.h>
 
@@ -1444,6 +1440,7 @@ static int zs_probe(struct platform_device *op)
 	up[0].port.line = (inst * 2) + 0;
 	up[0].port.dev = &op->dev;
 	up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
+	up[0].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNZILOG_CONSOLE);
 	if (keyboard_mouse)
 		up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
 	sunzilog_init_hw(&up[0]);
@@ -1461,6 +1458,7 @@ static int zs_probe(struct platform_device *op)
 	up[1].port.line = (inst * 2) + 1;
 	up[1].port.dev = &op->dev;
 	up[1].flags |= 0;
+	up[1].port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNZILOG_CONSOLE);
 	if (keyboard_mouse)
 		up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
 	sunzilog_init_hw(&up[1]);
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index a0555ae2b1ef..2e151a4c222b 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -332,8 +332,6 @@ static int qe_uart_tx_pump(struct uart_qe_port *qe_port)
 	struct uart_port *port = &qe_port->port;
 	struct circ_buf *xmit = &port->state->xmit;
 
-	bdp = qe_port->rx_cur;
-
 	/* Handle xon/xoff */
 	if (port->x_char) {
 		/* Pick next descriptor and fill from buffer */
@@ -551,9 +549,7 @@ handle_error:
 	/* Overrun does not affect the current character ! */
 	if (status & BD_SC_OV)
 		tty_insert_flip_char(tport, 0, TTY_OVERRUN);
-#ifdef SUPPORT_SYSRQ
 	port->sysrq = 0;
-#endif
 	goto error_return;
 }
 
diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c
index 6d106e33f842..eeb4b6568776 100644
--- a/drivers/tty/serial/vr41xx_siu.c
+++ b/drivers/tty/serial/vr41xx_siu.c
@@ -7,10 +7,6 @@
  *  Based on drivers/serial/8250.c, by Russell King.
  */
 
-#if defined(CONFIG_SERIAL_VR41XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/init.h>
@@ -869,6 +865,7 @@ static int siu_probe(struct platform_device *dev)
 		port = &siu_uart_ports[i];
 		port->ops = &siu_uart_ops;
 		port->dev = &dev->dev;
+		port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_VR41XX_CONSOLE);
 
 		retval = uart_add_one_port(&siu_uart_driver, port);
 		if (retval < 0) {
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 3d58e9b34553..764e992438b2 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -7,10 +7,6 @@
  * Author: Robert Love <rlove@google.com>
  */
 
-#if defined(CONFIG_SERIAL_VT8500_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-# define SUPPORT_SYSRQ
-#endif
-
 #include <linux/hrtimer.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -703,6 +699,7 @@ static int vt8500_serial_probe(struct platform_device *pdev)
 	vt8500_port->uart.line = port;
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
+	vt8500_port->uart.has_sysrq = IS_ENABLED(CONFIG_SERIAL_VT8500_CONSOLE);
 
 	/* Serial core uses the magic "16" everywhere - adjust for it */
 	vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) /
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 4e55bc327a54..98db9dc168ff 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -9,10 +9,6 @@
  * in the code.
  */
 
-#if defined(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/console.h>
@@ -158,6 +154,16 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
 #define CDNS_UART_MODEMCR_DTR	0x00000001 /* Data Terminal Ready */
 
 /*
+ * Modem Status register:
+ * The read/write Modem Status register reports the interface with the modem
+ * or data set, or a peripheral device emulating a modem.
+ */
+#define CDNS_UART_MODEMSR_DCD	BIT(7) /* Data Carrier Detect */
+#define CDNS_UART_MODEMSR_RI	BIT(6) /* Ting Indicator */
+#define CDNS_UART_MODEMSR_DSR	BIT(5) /* Data Set Ready */
+#define CDNS_UART_MODEMSR_CTS	BIT(4) /* Clear To Send */
+
+/*
  * Channel Status Register:
  * The channel status register (CSR) is provided to enable the control logic
  * to monitor the status of bits in the channel interrupt status register,
@@ -684,7 +690,7 @@ static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
 static void cdns_uart_set_termios(struct uart_port *port,
 				struct ktermios *termios, struct ktermios *old)
 {
-	unsigned int cval = 0;
+	u32 cval = 0;
 	unsigned int baud, minbaud, maxbaud;
 	unsigned long flags;
 	unsigned int ctrl_reg, mode_reg, val;
@@ -805,6 +811,13 @@ static void cdns_uart_set_termios(struct uart_port *port,
 	cval |= mode_reg & 1;
 	writel(cval, port->membase + CDNS_UART_MR);
 
+	cval = readl(port->membase + CDNS_UART_MODEMCR);
+	if (termios->c_cflag & CRTSCTS)
+		cval |= CDNS_UART_MODEMCR_FCM;
+	else
+		cval &= ~CDNS_UART_MODEMCR_FCM;
+	writel(cval, port->membase + CDNS_UART_MODEMCR);
+
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
@@ -1007,12 +1020,24 @@ static void cdns_uart_config_port(struct uart_port *port, int flags)
  */
 static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
 {
+	u32 val;
+	unsigned int mctrl = 0;
 	struct cdns_uart *cdns_uart_data = port->private_data;
 
 	if (cdns_uart_data->cts_override)
-		return 0;
-
-	return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+		return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+
+	val = readl(port->membase + CDNS_UART_MODEMSR);
+	if (val & CDNS_UART_MODEMSR_CTS)
+		mctrl |= TIOCM_CTS;
+	if (val & CDNS_UART_MODEMSR_DSR)
+		mctrl |= TIOCM_DSR;
+	if (val & CDNS_UART_MODEMSR_RI)
+		mctrl |= TIOCM_RNG;
+	if (val & CDNS_UART_MODEMSR_DCD)
+		mctrl |= TIOCM_CAR;
+
+	return mctrl;
 }
 
 static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
@@ -1027,12 +1052,13 @@ static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
 	val = readl(port->membase + CDNS_UART_MODEMCR);
 	mode_reg = readl(port->membase + CDNS_UART_MR);
 
-	val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR |
-		 CDNS_UART_MODEMCR_FCM);
+	val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
 	mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
 
-	if (mctrl & TIOCM_RTS || mctrl & TIOCM_DTR)
-		val |= CDNS_UART_MODEMCR_FCM;
+	if (mctrl & TIOCM_RTS)
+		val |= CDNS_UART_MODEMCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		val |= CDNS_UART_MODEMCR_DTR;
 	if (mctrl & TIOCM_LOOP)
 		mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
 	else
@@ -1634,6 +1660,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
 	port->flags	= UPF_BOOT_AUTOCONF;
 	port->ops	= &cdns_uart_ops;
 	port->fifosize	= CDNS_UART_FIFO_SIZE;
+	port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
 
 	/*
 	 * Register the port.
diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c
index 89154ac4c577..4b4f604646a7 100644
--- a/drivers/tty/serial/zs.c
+++ b/drivers/tty/serial/zs.c
@@ -44,10 +44,6 @@
  * complicated and prevents the use of some automatic modes of operation.
  */
 
-#if defined(CONFIG_SERIAL_ZS_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
 #include <linux/bug.h>
 #include <linux/console.h>
 #include <linux/delay.h>
@@ -1106,6 +1102,7 @@ static int __init zs_probe_sccs(void)
 			zport->scc	= &zs_sccs[chip];
 			zport->clk_mode	= 16;
 
+			uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_ZS_CONSOLE);
 			uport->irq	= zs_parms.irq[chip];
 			uport->uartclk	= ZS_CLOCK;
 			uport->fifosize	= 1;
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index 5759b6c5b3e2..b794177ccfb9 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -1334,10 +1334,10 @@ static void throttle(struct tty_struct * tty)
 	DBGINFO(("%s throttle\n", info->device_name));
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals &= ~SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1359,10 +1359,10 @@ static void unthrottle(struct tty_struct * tty)
 		else
 			send_xchar(tty, START_CHAR(tty));
 	}
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->signals |= SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -2098,7 +2098,7 @@ static void isr_rxdata(struct slgt_info *info)
 		if (desc_complete(info->rbufs[i])) {
 			/* all buffers full */
 			rx_stop(info);
-			info->rx_restart = 1;
+			info->rx_restart = true;
 			continue;
 		}
 		info->rbufs[i].buf[count++] = (unsigned char)reg;
@@ -2560,8 +2560,8 @@ static void change_params(struct slgt_info *info)
 	info->read_status_mask = IRQ_RXOVER;
 	if (I_INPCK(info->port.tty))
 		info->read_status_mask |= MASK_PARITY | MASK_FRAMING;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask |= MASK_BREAK;
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+		info->read_status_mask |= MASK_BREAK;
 	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING;
 	if (I_IGNBRK(info->port.tty)) {
@@ -3192,7 +3192,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return 0;
 }
@@ -3203,7 +3203,7 @@ static int carrier_raised(struct tty_port *port)
 	struct slgt_info *info = container_of(port, struct slgt_info, port);
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 	return (info->signals & SerialSignal_DCD) ? 1 : 0;
 }
@@ -3218,7 +3218,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 7446b03fef02..33ff2dbb6650 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -1453,10 +1453,10 @@ static void throttle(struct tty_struct * tty)
 	if (I_IXOFF(tty))
 		send_xchar(tty, STOP_CHAR(tty));
 
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals &= ~SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -1482,10 +1482,10 @@ static void unthrottle(struct tty_struct * tty)
 			send_xchar(tty, START_CHAR(tty));
 	}
 
- 	if (C_CRTSCTS(tty)) {
+	if (C_CRTSCTS(tty)) {
 		spin_lock_irqsave(&info->lock,flags);
 		info->serial_signals |= SerialSignal_RTS;
-	 	set_signals(info);
+		set_signals(info);
 		spin_unlock_irqrestore(&info->lock,flags);
 	}
 }
@@ -2470,7 +2470,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 					if (status & SerialSignal_CTS) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx start...");
-			 			info->port.tty->hw_stopped = 0;
+						info->port.tty->hw_stopped = 0;
 						tx_start(info);
 						info->pending_bh |= BH_TRANSMIT;
 						return;
@@ -2479,7 +2479,7 @@ static void isr_io_pin( SLMP_INFO *info, u16 status )
 					if (!(status & SerialSignal_CTS)) {
 						if ( debug_level >= DEBUG_LEVEL_ISR )
 							printk("CTS tx stop...");
-			 			info->port.tty->hw_stopped = 1;
+						info->port.tty->hw_stopped = 1;
 						tx_stop(info);
 					}
 				}
@@ -2806,8 +2806,8 @@ static void change_params(SLMP_INFO *info)
 	info->read_status_mask2 = OVRN;
 	if (I_INPCK(info->port.tty))
 		info->read_status_mask2 |= PE | FRME;
- 	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
- 		info->read_status_mask1 |= BRKD;
+	if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
+		info->read_status_mask1 |= BRKD;
 	if (I_IGNPAR(info->port.tty))
 		info->ignore_status_mask2 |= PE | FRME;
 	if (I_IGNBRK(info->port.tty)) {
@@ -3177,7 +3177,7 @@ static int tiocmget(struct tty_struct *tty)
  	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
@@ -3215,7 +3215,7 @@ static int tiocmset(struct tty_struct *tty,
 		info->serial_signals &= ~SerialSignal_DTR;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	return 0;
@@ -3227,7 +3227,7 @@ static int carrier_raised(struct tty_port *port)
 	unsigned long flags;
 
 	spin_lock_irqsave(&info->lock,flags);
- 	get_signals(info);
+	get_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 
 	return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
@@ -3243,7 +3243,7 @@ static void dtr_rts(struct tty_port *port, int on)
 		info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
 	else
 		info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- 	set_signals(info);
+	set_signals(info);
 	spin_unlock_irqrestore(&info->lock,flags);
 }
 
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 573b2055173c..1d4f317a0e42 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -967,8 +967,6 @@ static struct input_handler sysrq_handler = {
 	.id_table	= sysrq_ids,
 };
 
-static bool sysrq_handler_registered;
-
 static inline void sysrq_register_handler(void)
 {
 	int error;
@@ -978,16 +976,11 @@ static inline void sysrq_register_handler(void)
 	error = input_register_handler(&sysrq_handler);
 	if (error)
 		pr_err("Failed to register input handler, error %d", error);
-	else
-		sysrq_handler_registered = true;
 }
 
 static inline void sysrq_unregister_handler(void)
 {
-	if (sysrq_handler_registered) {
-		input_unregister_handler(&sysrq_handler);
-		sysrq_handler_registered = false;
-	}
+	input_unregister_handler(&sysrq_handler);
 }
 
 static int sysrq_reset_seq_param_set(const char *buffer,
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
index f438eaa68246..40207cab3b2a 100644
--- a/drivers/tty/tty_baudrate.c
+++ b/drivers/tty/tty_baudrate.c
@@ -17,32 +17,28 @@
  * include/asm/termbits.h file.
  */
 static const speed_t baud_table[] = {
-	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
-	9600, 19200, 38400, 57600, 115200, 230400, 460800,
+	0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400,
+	4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800,
 #ifdef __sparc__
-	76800, 153600, 307200, 614400, 921600
+	76800, 153600, 307200, 614400, 921600, 500000, 576000,
+	1000000, 1152000, 1500000, 2000000
 #else
 	500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
 	2500000, 3000000, 3500000, 4000000
 #endif
 };
 
-#ifndef __sparc__
 static const tcflag_t baud_bits[] = {
-	B0, B50, B75, B110, B134, B150, B200, B300, B600,
-	B1200, B1800, B2400, B4800, B9600, B19200, B38400,
-	B57600, B115200, B230400, B460800, B500000, B576000,
-	B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
-	B3000000, B3500000, B4000000
-};
+	B0, B50, B75, B110, B134, B150, B200, B300, B600, B1200, B1800, B2400,
+	B4800, B9600, B19200, B38400, B57600, B115200, B230400, B460800,
+#ifdef __sparc__
+	B76800, B153600, B307200, B614400, B921600, B500000, B576000,
+	B1000000, B1152000, B1500000, B2000000
 #else
-static const tcflag_t baud_bits[] = {
-	B0, B50, B75, B110, B134, B150, B200, B300, B600,
-	B1200, B1800, B2400, B4800, B9600, B19200, B38400,
-	B57600, B115200, B230400, B460800, B76800, B153600,
-	B307200, B614400, B921600
-};
+	B500000, B576000, B921600, B1000000, B1152000, B1500000, B2000000,
+	B2500000, B3000000, B3500000, B4000000
 #endif
+};
 
 static int n_baud_table = ARRAY_SIZE(baud_table);
 
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index d9f54c7d94f2..a1453fe10862 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1893,7 +1893,7 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
 struct tty_struct *tty_kopen(dev_t device)
 {
 	struct tty_struct *tty;
-	struct tty_driver *driver = NULL;
+	struct tty_driver *driver;
 	int index = -1;
 
 	mutex_lock(&tty_mutex);
diff --git a/drivers/tty/vt/.gitignore b/drivers/tty/vt/.gitignore
index 9b38b85f9d9a..3ecf42234d89 100644
--- a/drivers/tty/vt/.gitignore
+++ b/drivers/tty/vt/.gitignore
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
+conmakehash
 consolemap_deftbl.c
 defkeymap.c
diff --git a/drivers/tty/vt/Makefile b/drivers/tty/vt/Makefile
index edbbe0ccdb83..329ca336b8ee 100644
--- a/drivers/tty/vt/Makefile
+++ b/drivers/tty/vt/Makefile
@@ -12,10 +12,12 @@ obj-$(CONFIG_HW_CONSOLE)		+= vt.o defkeymap.o
 # Files generated that shall be removed upon make clean
 clean-files := consolemap_deftbl.c defkeymap.c
 
+hostprogs-y += conmakehash
+
 quiet_cmd_conmk = CONMK   $@
-      cmd_conmk = scripts/conmakehash $< > $@
+      cmd_conmk = $(obj)/conmakehash $< > $@
 
-$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE)
+$(obj)/consolemap_deftbl.c: $(src)/$(FONTMAPFILE) $(obj)/conmakehash
 	$(call cmd,conmk)
 
 $(obj)/defkeymap.o:  $(obj)/defkeymap.c
diff --git a/scripts/conmakehash.c b/drivers/tty/vt/conmakehash.c
index cddd789fe46e..cddd789fe46e 100644
--- a/scripts/conmakehash.c
+++ b/drivers/tty/vt/conmakehash.c
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 34aa39d1aed9..35d21cdb60d0 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3326,8 +3326,9 @@ static int __init con_init(void)
 
 	console_lock();
 
-	if (conswitchp)
-		display_desc = conswitchp->con_startup();
+	if (!conswitchp)
+		conswitchp = &dummy_con;
+	display_desc = conswitchp->con_startup();
 	if (!display_desc) {
 		fg_console = 0;
 		console_unlock();
@@ -3567,7 +3568,6 @@ err:
 
 
 #ifdef CONFIG_VT_HW_CONSOLE_BINDING
-/* unlocked version of unbind_con_driver() */
 int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt)
 {
 	struct module *owner = csw->owner;
@@ -4095,7 +4095,7 @@ static void con_driver_unregister_callback(struct work_struct *ignored)
  *	when a driver wants to take over some existing consoles
  *	and become default driver for newly opened ones.
  *
- *	do_take_over_console is basically a register followed by unbind
+ *	do_take_over_console is basically a register followed by bind
  */
 int do_take_over_console(const struct consw *csw, int first, int last, int deflt)
 {
diff --git a/drivers/video/console/Kconfig b/drivers/video/console/Kconfig
index c10e17fb9a9a..70c10ea1c38b 100644
--- a/drivers/video/console/Kconfig
+++ b/drivers/video/console/Kconfig
@@ -93,7 +93,6 @@ config SGI_NEWPORT_CONSOLE
 
 config DUMMY_CONSOLE
 	bool
-	depends on VGA_CONSOLE!=y || SGI_NEWPORT_CONSOLE!=y 
 	default y
 
 config DUMMY_CONSOLE_COLUMNS
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index bb2bc99388ca..6a8e8c48c882 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -25,6 +25,7 @@ struct plat_serial8250_port {
 	unsigned char	regshift;	/* register shift */
 	unsigned char	iotype;		/* UPIO_* */
 	unsigned char	hub6;
+	unsigned char	has_sysrq;	/* supports magic SysRq */
 	upf_t		flags;		/* UPF_* flags */
 	unsigned int	type;		/* If UPF_FIXED_TYPE */
 	unsigned int	(*serial_in)(struct uart_port *, int);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 2b78cc734719..52404ef1694e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -161,11 +161,6 @@ struct uart_port {
 	struct uart_icount	icount;			/* statistics */
 
 	struct console		*cons;			/* struct console, if any */
-#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
-	unsigned long		sysrq;			/* sysrq timeout */
-	unsigned int		sysrq_ch;		/* char for sysrq */
-#endif
-
 	/* flags must be updated while holding port mutex */
 	upf_t			flags;
 
@@ -244,9 +239,13 @@ struct uart_port {
 	resource_size_t		mapbase;		/* for ioremap */
 	resource_size_t		mapsize;
 	struct device		*dev;			/* parent device */
+
+	unsigned long		sysrq;			/* sysrq timeout */
+	unsigned int		sysrq_ch;		/* char for sysrq */
+	unsigned char		has_sysrq;
+
 	unsigned char		hub6;			/* this should be in the 8250 driver */
 	unsigned char		suspended;
-	unsigned char		unused[2];
 	const char		*name;			/* port name */
 	struct attribute_group	*attr_group;		/* port specific attributes */
 	const struct attribute_group **tty_groups;	/* all attributes (serial core use only) */
@@ -460,81 +459,11 @@ extern void uart_handle_cts_change(struct uart_port *uport,
 extern void uart_insert_char(struct uart_port *port, unsigned int status,
 		 unsigned int overrun, unsigned int ch, unsigned int flag);
 
-#if defined(SUPPORT_SYSRQ) && defined(CONFIG_MAGIC_SYSRQ_SERIAL)
-static inline int
-uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
-{
-	if (port->sysrq) {
-		if (ch && time_before(jiffies, port->sysrq)) {
-			handle_sysrq(ch);
-			port->sysrq = 0;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-	return 0;
-}
-static inline int
-uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
-{
-	if (port->sysrq) {
-		if (ch && time_before(jiffies, port->sysrq)) {
-			port->sysrq_ch = ch;
-			port->sysrq = 0;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-	return 0;
-}
-static inline void
-uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
-{
-	int sysrq_ch;
-
-	sysrq_ch = port->sysrq_ch;
-	port->sysrq_ch = 0;
-
-	spin_unlock_irqrestore(&port->lock, irqflags);
-
-	if (sysrq_ch)
-		handle_sysrq(sysrq_ch);
-}
-#else
-static inline int
-uart_handle_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
-static inline int
-uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch) { return 0; }
-static inline void
-uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
-{
-	spin_unlock_irqrestore(&port->lock, irqflags);
-}
-#endif
-
-/*
- * We do the SysRQ and SAK checking like this...
- */
-static inline int uart_handle_break(struct uart_port *port)
-{
-	struct uart_state *state = port->state;
-
-	if (port->handle_break)
-		port->handle_break(port);
-
-#ifdef SUPPORT_SYSRQ
-	if (port->cons && port->cons->index == port->line) {
-		if (!port->sysrq) {
-			port->sysrq = jiffies + HZ*5;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-#endif
-	if (port->flags & UPF_SAK)
-		do_SAK(state->port.tty);
-	return 0;
-}
+extern int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch);
+extern int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch);
+extern void uart_unlock_and_check_sysrq(struct uart_port *port,
+					unsigned long irqflags);
+extern int uart_handle_break(struct uart_port *port);
 
 /*
  *	UART_ENABLE_MS - determine if port should enable modem status irqs
diff --git a/scripts/.gitignore b/scripts/.gitignore
index 306054ef340f..ef45f96cd7a5 100644
--- a/scripts/.gitignore
+++ b/scripts/.gitignore
@@ -2,7 +2,6 @@
 # Generated files
 #
 bin2c
-conmakehash
 kallsyms
 unifdef
 recordmcount
diff --git a/scripts/Makefile b/scripts/Makefile
index b0e962611d50..4d41f48e7376 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -4,14 +4,11 @@
 # the kernel for the build process.
 # ---------------------------------------------------------------------------
 # kallsyms:      Find all symbols in vmlinux
-# conmakehash:   Create chartable
-# conmakehash:	 Create arrays for initializing the kernel console tables
 
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include
 
 hostprogs-$(CONFIG_BUILD_BIN2C)  += bin2c
 hostprogs-$(CONFIG_KALLSYMS)     += kallsyms
-hostprogs-$(CONFIG_VT)           += conmakehash
 hostprogs-$(BUILD_C_RECORDMCOUNT) += recordmcount
 hostprogs-$(CONFIG_BUILDTIME_TABLE_SORT) += sorttable
 hostprogs-$(CONFIG_ASN1)	 += asn1_compiler
author	Linus Torvalds <torvalds@linux-foundation.org>	2020-01-29 21:13:27 +0300
committer	Linus Torvalds <torvalds@linux-foundation.org>	2020-01-29 21:13:27 +0300
commit	ca9b5b6283984f67434cee810f3b08e19630226d (patch)
tree	fb2e2db2434920a857b7ce6dfbd789b6f279d412
parent	aac96626713fe167c672f9a008be0f514aa3e237 (diff)
parent	85f4c95172d606dd66f7ee1fa50c45a245535ffd (diff)
download	linux-ca9b5b6283984f67434cee810f3b08e19630226d.tar.xz