Merge tag 'regulator-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "A very quiet release for regulator, there's some new device support in
  existing drivers here and a few fixes but nothing in the core.

  Summary:

   - New device support for Allwinner AXP813, Dialog DA223/4/5 and
     Qualcomm PMI8994"

* tag 'regulator-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65218: remove unused tps_info structure
  regulator: tps65218: Fix strobe assignment
  regulator: qcom_spmi: Include offset when translating voltages
  regulator: qcom_spmi: Add support for pmi8994
  regulator: da9211: update for supporting da9223/4/5
  ASoC: pfuze100: Remove leading zero from '@08' notation
  regulator: axp20x: Simplify axp20x_is_polyphase_slave implementation
  regulator: axp20x: Add support for AXP813 regulators

12 files changed, 241 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index 0f2a6f8fcafd..27717e816e71 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,8 +1,9 @@
-* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
+ Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
-  or "dlg,da9214" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223"
+  or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -16,7 +17,6 @@ Optional properties:
 - Any optional property defined in regulator.txt
 
 Example 1) DA9211
-
 	pmic: da9211@68 {
 		compatible = "dlg,da9211";
 		reg = <0x68>;
@@ -35,7 +35,6 @@ Example 1) DA9211
 	};
 
 Example 2) DA9212
-
 	pmic: da9212@68 {
 		compatible = "dlg,da9212";
 		reg = <0x68>;
@@ -79,7 +78,25 @@ Example 3) DA9213
 		};
 	};
 
-Example 4) DA9214
+Example 4) DA9223
+	pmic: da9223@68 {
+		compatible = "dlg,da9223";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+		};
+	};
+
+Example 5) DA9214
 	pmic: da9214@68 {
 		compatible = "dlg,da9214";
 		reg = <0x68>;
@@ -105,7 +122,33 @@ Example 4) DA9214
 		};
 	};
 
-Example 5) DA9215
+Example 6) DA9224
+	pmic: da9224@68 {
+		compatible = "dlg,da9224";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
+
+Example 7) DA9215
 	pmic: da9215@68 {
 		compatible = "dlg,da9215";
 		reg = <0x68>;
@@ -131,3 +174,28 @@ Example 5) DA9215
 		};
 	};
 
+Example 8) DA9225
+	pmic: da9225@68 {
+		compatible = "dlg,da9225";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
+			BUCKB {
+				regulator-name = "VBUCKB";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <4000000>;
+				regulator-max-microamp 	= <7000000>;
+				enable-gpios = <&gpio 17 0>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt
index 444c47831a40..c6dd3f5e485b 100644
--- a/Documentation/devicetree/bindings/regulator/pfuze100.txt
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt
@@ -21,7 +21,7 @@ Each regulator is defined using the standard binding for regulators.
 
 Example 1: PFUZE100
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -122,7 +122,7 @@ Example 1: PFUZE100
 
 Example 2: PFUZE200
 
-	pmic: pfuze200@08 {
+	pmic: pfuze200@8 {
 		compatible = "fsl,pfuze200";
 		reg = <0x08>;
 
@@ -216,7 +216,7 @@ Example 2: PFUZE200
 
 Example 3: PFUZE3000
 
-	pmic: pfuze3000@08 {
+	pmic: pfuze3000@8 {
 		compatible = "fsl,pfuze3000";
 		reg = <0x08>;
 
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 0fa3b0fac129..57d2c65899df 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -8,6 +8,7 @@ Qualcomm SPMI Regulators
 			"qcom,pm8916-regulators"
 			"qcom,pm8941-regulators"
 			"qcom,pm8994-regulators"
+			"qcom,pmi8994-regulators"
 
 - interrupts:
 	Usage: optional
@@ -100,6 +101,15 @@ Qualcomm SPMI Regulators
 	Definition: Reference to regulator supplying the input pin, as
 		    described in the data sheet.
 
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_l1-supply:
+	Usage: optional (pmi8994 only)
+	Value type: <phandle>
+	Definition: Reference to regulator supplying the input pin, as
+		    described in the data sheet.
+
 
 The regulator node houses sub-nodes for each regulator within the device. Each
 sub-node is identified using the node's name, with valid values listed for each
@@ -122,6 +132,9 @@ pm8994:
 	l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
 	l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2
 
+pmi8994:
+	s1, s2, s3, l1
+
 The content of each sub-node is defined by the standard binding for regulators -
 see regulator.txt - with additional custom properties described below:
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 0fd6195601ba..96cd55f9e3c5 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -244,7 +244,7 @@ config REGULATOR_DA9210
 	  interface.
 
 config REGULATOR_DA9211
-	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator"
+	tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator"
 	depends on I2C
 	select REGMAP_I2C
 	help
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 376a99b7cf5d..181622b2813d 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -244,6 +244,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
 	.ops		= &axp20x_ops_sw,
 };
 
+/* DCDC ranges shared with AXP813 */
 static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
 	REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
 	REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
@@ -426,6 +427,69 @@ static const struct regulator_desc axp809_regulators[] = {
 	AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
 };
 
+static const struct regulator_desc axp813_regulators[] = {
+	AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
+			76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(1)),
+	AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
+			76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(2)),
+	AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
+			76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(3)),
+	AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
+			68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(4)),
+	AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
+			72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(5)),
+	AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp803_dcdc6_ranges,
+			72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
+			BIT(6)),
+	AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
+	AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
+	AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
+	AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
+	AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
+			32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+			BIT(4)),
+	AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
+	AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	/* to do / check ... */
+	AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
+		 AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
+	AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
+		 AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
+	/*
+	 * TODO: FLDO3 = {DCDC5, FLDOIN} / 2
+	 *
+	 * This means FLDO3 effectively switches supplies at runtime,
+	 * something the regulator subsystem does not support.
+	 */
+	AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800),
+	AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_SW(AXP813, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(7)),
+};
+
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -441,9 +505,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		step = 75;
 		break;
 	case AXP803_ID:
+	case AXP813_ID:
 		/*
-		 * AXP803 DCDC work frequency setting has the same range and
-		 * step as AXP22X, but at a different register.
+		 * AXP803/AXP813 DCDC work frequency setting has the same
+		 * range and step as AXP22X, but at a different register.
 		 * Fall through to the check below.
 		 * (See include/linux/mfd/axp20x.h)
 		 */
@@ -561,6 +626,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 		workmode <<= id - AXP803_DCDC1;
 		break;
 
+	case AXP813_ID:
+		if (id < AXP813_DCDC1 || id > AXP813_DCDC7)
+			return -EINVAL;
+
+		mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1);
+		workmode <<= id - AXP813_DCDC1;
+		break;
+
 	default:
 		/* should not happen */
 		WARN_ON(1);
@@ -579,11 +652,12 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
 	u32 reg = 0;
 
 	/*
-	 * Currently in our supported AXP variants, only AXP803 and AXP806
-	 * have polyphase regulators.
+	 * Currently in our supported AXP variants, only AXP803, AXP806,
+	 * and AXP813 have polyphase regulators.
 	 */
 	switch (axp20x->variant) {
 	case AXP803_ID:
+	case AXP813_ID:
 		regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, &reg);
 
 		switch (id) {
@@ -656,6 +730,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		regulators = axp809_regulators;
 		nregulators = AXP809_REG_ID_MAX;
 		break;
+	case AXP813_ID:
+		regulators = axp813_regulators;
+		nregulators = AXP813_REG_ID_MAX;
+		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
+						  "x-powers,drive-vbus-en");
+		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
 			axp20x->variant);
@@ -677,6 +757,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		if (axp20x_is_polyphase_slave(axp20x, i))
 			continue;
 
+		/* Support for AXP813's FLDO3 is not implemented */
+		if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3)
+			continue;
+
 		/*
 		 * Regulators DC1SW and DC5LDO are connected internally,
 		 * so we have to handle their supply names separately.
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index aa47280efd32..9b8f47617724 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -1,6 +1,6 @@
 /*
  * da9211-regulator.c - Regulator device driver for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -496,8 +496,11 @@ static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
 	{"da9212", DA9212},
 	{"da9213", DA9213},
+	{"da9223", DA9223},
 	{"da9214", DA9214},
+	{"da9224", DA9224},
 	{"da9215", DA9215},
+	{"da9225", DA9225},
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
@@ -507,8 +510,11 @@ static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
 	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
 	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
-	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] },
-	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] },
+	{ .compatible = "dlg,da9223", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[4] },
+	{ .compatible = "dlg,da9224", .data = &da9211_i2c_id[5] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[6] },
+	{ .compatible = "dlg,da9225", .data = &da9211_i2c_id[7] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -526,5 +532,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 regulator driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h
index b841bbf330cc..2cb32aab4f82 100644
--- a/drivers/regulator/da9211-regulator.h
+++ b/drivers/regulator/da9211-regulator.h
@@ -1,6 +1,6 @@
 /*
  * da9211-regulator.h - Regulator definitions for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 16c5f84e06a7..0241ada47d04 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -593,13 +593,20 @@ static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg,
 				  u8 *voltage_sel)
 {
 	const struct spmi_voltage_range *range, *end;
+	unsigned offset;
 
 	range = vreg->set_points->range;
 	end = range + vreg->set_points->count;
 
 	for (; range < end; range++) {
 		if (selector < range->n_voltages) {
-			*voltage_sel = selector;
+			/*
+			 * hardware selectors between set point min and real
+			 * min are invalid so we ignore them
+			 */
+			offset = range->set_point_min_uV - range->min_uV;
+			offset /= range->step_uV;
+			*voltage_sel = selector + offset;
 			*range_sel = range->range_sel;
 			return 0;
 		}
@@ -613,15 +620,35 @@ static int spmi_sw_selector_to_hw(struct spmi_regulator *vreg,
 static int spmi_hw_selector_to_sw(struct spmi_regulator *vreg, u8 hw_sel,
 				  const struct spmi_voltage_range *range)
 {
-	int sw_sel = hw_sel;
+	unsigned sw_sel = 0;
+	unsigned offset, max_hw_sel;
 	const struct spmi_voltage_range *r = vreg->set_points->range;
-
-	while (r != range) {
+	const struct spmi_voltage_range *end = r + vreg->set_points->count;
+
+	for (; r < end; r++) {
+		if (r == range && range->n_voltages) {
+			/*
+			 * hardware selectors between set point min and real
+			 * min and between set point max and real max are
+			 * invalid so we return an error if they're
+			 * programmed into the hardware
+			 */
+			offset = range->set_point_min_uV - range->min_uV;
+			offset /= range->step_uV;
+			if (hw_sel < offset)
+				return -EINVAL;
+
+			max_hw_sel = range->set_point_max_uV - range->min_uV;
+			max_hw_sel /= range->step_uV;
+			if (hw_sel > max_hw_sel)
+				return -EINVAL;
+
+			return sw_sel + hw_sel - offset;
+		}
 		sw_sel += r->n_voltages;
-		r++;
 	}
 
-	return sw_sel;
+	return -EINVAL;
 }
 
 static const struct spmi_voltage_range *
@@ -1619,11 +1646,20 @@ static const struct spmi_regulator_data pm8994_regulators[] = {
 	{ }
 };
 
+static const struct spmi_regulator_data pmi8994_regulators[] = {
+	{ "s1", 0x1400, "vdd_s1", },
+	{ "s2", 0x1700, "vdd_s2", },
+	{ "s3", 0x1a00, "vdd_s3", },
+	{ "l1", 0x4000, "vdd_l1", },
+        { }
+};
+
 static const struct of_device_id qcom_spmi_regulator_match[] = {
 	{ .compatible = "qcom,pm8841-regulators", .data = &pm8841_regulators },
 	{ .compatible = "qcom,pm8916-regulators", .data = &pm8916_regulators },
 	{ .compatible = "qcom,pm8941-regulators", .data = &pm8941_regulators },
 	{ .compatible = "qcom,pm8994-regulators", .data = &pm8994_regulators },
+	{ .compatible = "qcom,pmi8994-regulators", .data = &pmi8994_regulators },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_spmi_regulator_match);
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index 9aafbb03482d..bc489958fed7 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -154,7 +154,7 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
 
 	if (!tps->strobes[rid]) {
 		if (rid == TPS65218_DCDC_3)
-			tps->info[rid]->strobe = 3;
+			tps->strobes[rid] = 3;
 		else
 			return -EINVAL;
 	}
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index e9c908c4fba8..78dc85365c4f 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -131,6 +131,9 @@ enum axp20x_variants {
 #define AXP803_DCDC6_V_OUT		0x25
 #define AXP803_DCDC_FREQ_CTRL		0x3b
 
+/* Other DCDC regulator control registers are the same as AXP803 */
+#define AXP813_DCDC7_V_OUT		0x26
+
 /* Interrupt */
 #define AXP152_IRQ1_EN			0x40
 #define AXP152_IRQ2_EN			0x41
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index bccd2d68b1e3..f069c518c0ed 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -246,24 +246,6 @@ enum tps65218_irqs {
 };
 
 /**
- * struct tps_info - packages regulator constraints
- * @id:			Id of the regulator
- * @name:		Voltage regulator name
- * @min_uV:		minimum micro volts
- * @max_uV:		minimum micro volts
- * @strobe:		sequencing strobe value for the regulator
- *
- * This data is used to check the regualtor voltage limits while setting.
- */
-struct tps_info {
-	int id;
-	const char *name;
-	int min_uV;
-	int max_uV;
-	int strobe;
-};
-
-/**
  * struct tps65218 - tps65218 sub-driver chip access routines
  *
  * Device data may be used to access the TPS65218 chip
@@ -280,7 +262,6 @@ struct tps65218 {
 	u32 irq_mask;
 	struct regmap_irq_chip_data *irq_data;
 	struct regulator_desc desc[TPS65218_NUM_REGULATOR];
-	struct tps_info *info[TPS65218_NUM_REGULATOR];
 	struct regmap *regmap;
 	u8 *strobes;
 };
diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h
index 80cb40b7c88d..f2fd2d3bf58f 100644
--- a/include/linux/regulator/da9211.h
+++ b/include/linux/regulator/da9211.h
@@ -1,6 +1,6 @@
 /*
  * da9211.h - Regulator device driver for DA9211/DA9212
- * /DA9213/DA9214/DA9215
+ * /DA9213/DA9223/DA9214/DA9224/DA9215/DA9225
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
@@ -25,8 +25,11 @@ enum da9211_chip_id {
 	DA9211,
 	DA9212,
 	DA9213,
+	DA9223,
 	DA9214,
+	DA9224,
 	DA9215,
+	DA9225,
 };
 
 struct da9211_pdata {