summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-02-09 23:34:41 +0300
committerLinus Torvalds <torvalds@linux-foundation.org>2015-02-09 23:34:41 +0300
commit5c30c3cc6d5de71f1248875e9213e6c109dda963 (patch)
tree79b81eeeb3f2bdce2c8a5e0dc853ef6026d3fad7
parent19acc77a36970958a4a0e4daeb2c8cb2aab0ffd4 (diff)
parentdd378b1bcaa0ef5b14cca1e52b58ef9a3279fd8b (diff)
downloadlinux-5c30c3cc6d5de71f1248875e9213e6c109dda963.tar.xz
Merge tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck: "Explicit support for ina231 added to ina2xx driver. Minor improvements, cleanup and fixes in various drivers" * tag 'hwmon-for-linus-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (tmp102) add hibernation callbacks hwmon: (ads2828) Only keep data in device data structure if needed hwmon: (ads2828) Convert to use regmap hwmon: (jc42) Allow negative hysteresis temperatures hwmon: (adc128d818) Do proper sign extension hwmon: (ad7314) Do proper sign extension hwmon: (abx500) Fix format string warnings hwmon: (jc42) Fix integer overflow when writing hysteresis value hwmon: (jc42) Fix integer overflow hwmon: (jc42) Use sign_extend32 for sign extension hwmon: (ina2xx) Add ina231 compatible string hwmon: (ina2xx) use DIV_ROUND_CLOSEST() to avoid rounding errors hwmon: (ina2xx) remove an unnecessary dev_get_drvdata() result check hwmon: (ina2xx) implement update_interval attribute for ina226 hwmon: (ina2xx) make shunt resistance configurable at run-time hwmon: (ina2xx) don't accept shunt values greater than the calibration factor hwmon: (ina2xx) remove a stray new line hwmon: (ina2xx) reinitialize the chip in case it's been reset hwmon: (nct7802) Constify struct regmap_config
-rw-r--r--Documentation/hwmon/ina2xx23
-rw-r--r--drivers/hwmon/Kconfig5
-rw-r--r--drivers/hwmon/abx500.c6
-rw-r--r--drivers/hwmon/ad7314.c5
-rw-r--r--drivers/hwmon/adc128d818.c3
-rw-r--r--drivers/hwmon/ads7828.c102
-rw-r--r--drivers/hwmon/ina2xx.c334
-rw-r--r--drivers/hwmon/jc42.c15
-rw-r--r--drivers/hwmon/nct7802.c2
-rw-r--r--drivers/hwmon/tmp102.c15
10 files changed, 375 insertions, 135 deletions
diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
index 4223c2d3b508..cfd31d94c872 100644
--- a/Documentation/hwmon/ina2xx
+++ b/Documentation/hwmon/ina2xx
@@ -26,6 +26,12 @@ Supported chips:
Datasheet: Publicly available at the Texas Instruments website
http://www.ti.com/
+ * Texas Instruments INA231
+ Prefix: 'ina231'
+ Addresses: I2C 0x40 - 0x4f
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/
+
Author: Lothar Felten <l-felten@ti.com>
Description
@@ -41,9 +47,18 @@ interface. The INA220 monitors both shunt drop and supply voltage.
The INA226 is a current shunt and power monitor with an I2C interface.
The INA226 monitors both a shunt voltage drop and bus supply voltage.
-The INA230 is a high or low side current shunt and power monitor with an I2C
-interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
+INA230 and INA231 are high or low side current shunt and power monitors
+with an I2C interface. The chips monitor both a shunt voltage drop and
+bus supply voltage.
-The shunt value in micro-ohms can be set via platform data or device tree.
-Please refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
+The shunt value in micro-ohms can be set via platform data or device tree at
+compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
+refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
if the device tree is used.
+
+Additionally ina226 supports update_interval attribute as described in
+Documentation/hwmon/sysfs-interface. Internally the interval is the sum of
+bus and shunt voltage conversion times multiplied by the averaging rate. We
+don't touch the conversion times and only modify the number of averages. The
+lower limit of the update_interval is 2 ms, the upper limit is 2253 ms.
+The actual programmed interval may vary from the desired value.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a7de26d1ac80..d931cbbed240 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1389,6 +1389,7 @@ config SENSORS_ADS1015
config SENSORS_ADS7828
tristate "Texas Instruments ADS7828 and compatibles"
depends on I2C
+ select REGMAP_I2C
help
If you say yes here you get support for Texas Instruments ADS7828 and
ADS7830 8-channel A/D converters. ADS7828 resolution is 12-bit, while
@@ -1430,8 +1431,8 @@ config SENSORS_INA2XX
tristate "Texas Instruments INA219 and compatibles"
depends on I2C
help
- If you say yes here you get support for INA219, INA220, INA226, and
- INA230 power monitor chips.
+ If you say yes here you get support for INA219, INA220, INA226,
+ INA230, and INA231 power monitor chips.
The INA2xx driver is configured for the default configuration of
the part as described in the datasheet.
diff --git a/drivers/hwmon/abx500.c b/drivers/hwmon/abx500.c
index 13875968c844..6cb89c0ebab6 100644
--- a/drivers/hwmon/abx500.c
+++ b/drivers/hwmon/abx500.c
@@ -221,7 +221,7 @@ static ssize_t show_min(struct device *dev,
struct abx500_temp *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- return sprintf(buf, "%ld\n", data->min[attr->index]);
+ return sprintf(buf, "%lu\n", data->min[attr->index]);
}
static ssize_t show_max(struct device *dev,
@@ -230,7 +230,7 @@ static ssize_t show_max(struct device *dev,
struct abx500_temp *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- return sprintf(buf, "%ld\n", data->max[attr->index]);
+ return sprintf(buf, "%lu\n", data->max[attr->index]);
}
static ssize_t show_max_hyst(struct device *dev,
@@ -239,7 +239,7 @@ static ssize_t show_max_hyst(struct device *dev,
struct abx500_temp *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- return sprintf(buf, "%ld\n", data->max_hyst[attr->index]);
+ return sprintf(buf, "%lu\n", data->max_hyst[attr->index]);
}
static ssize_t show_min_alarm(struct device *dev,
diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c
index f4f9b219bf16..11955467fc0f 100644
--- a/drivers/hwmon/ad7314.c
+++ b/drivers/hwmon/ad7314.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
+#include <linux/bitops.h>
/*
* AD7314 temperature masks
@@ -67,7 +68,7 @@ static ssize_t ad7314_show_temperature(struct device *dev,
switch (spi_get_device_id(chip->spi_dev)->driver_data) {
case ad7314:
data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_SHIFT;
- data = (data << 6) >> 6;
+ data = sign_extend32(data, 9);
return sprintf(buf, "%d\n", 250 * data);
case adt7301:
@@ -78,7 +79,7 @@ static ssize_t ad7314_show_temperature(struct device *dev,
* register. 1lsb - 31.25 milli degrees centigrade
*/
data = ret & ADT7301_TEMP_MASK;
- data = (data << 2) >> 2;
+ data = sign_extend32(data, 13);
return sprintf(buf, "%d\n",
DIV_ROUND_CLOSEST(data * 3125, 100));
diff --git a/drivers/hwmon/adc128d818.c b/drivers/hwmon/adc128d818.c
index 0625e50d7a6e..ad2b47e40345 100644
--- a/drivers/hwmon/adc128d818.c
+++ b/drivers/hwmon/adc128d818.c
@@ -27,6 +27,7 @@
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <linux/mutex.h>
+#include <linux/bitops.h>
/* Addresses to scan
* The chip also supports addresses 0x35..0x37. Don't scan those addresses
@@ -189,7 +190,7 @@ static ssize_t adc128_show_temp(struct device *dev,
if (IS_ERR(data))
return PTR_ERR(data);
- temp = (data->temp[index] << 7) >> 7; /* sign extend */
+ temp = sign_extend32(data->temp[index], 8);
return sprintf(buf, "%d\n", temp * 500);/* 0.5 degrees C resolution */
}
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index a622d40eec17..bce4e9ff21bf 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -30,14 +30,12 @@
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/jiffies.h>
#include <linux/module.h>
-#include <linux/mutex.h>
#include <linux/platform_data/ads7828.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
/* The ADS7828 registers */
-#define ADS7828_NCH 8 /* 8 channels supported */
#define ADS7828_CMD_SD_SE 0x80 /* Single ended inputs */
#define ADS7828_CMD_PD1 0x04 /* Internal vref OFF && A/D ON */
#define ADS7828_CMD_PD3 0x0C /* Internal vref ON && A/D ON */
@@ -50,17 +48,9 @@ enum ads7828_chips { ads7828, ads7830 };
/* Client specific data */
struct ads7828_data {
- struct i2c_client *client;
- struct mutex update_lock; /* Mutex protecting updates */
- unsigned long last_updated; /* Last updated time (in jiffies) */
- u16 adc_input[ADS7828_NCH]; /* ADS7828_NCH samples */
- bool valid; /* Validity flag */
- bool diff_input; /* Differential input */
- bool ext_vref; /* External voltage reference */
- unsigned int vref_mv; /* voltage reference value */
+ struct regmap *regmap;
u8 cmd_byte; /* Command byte without channel bits */
unsigned int lsb_resol; /* Resolution of the ADC sample LSB */
- s32 (*read_channel)(const struct i2c_client *client, u8 command);
};
/* Command byte C2,C1,C0 - see datasheet */
@@ -69,42 +59,22 @@ static inline u8 ads7828_cmd_byte(u8 cmd, int ch)
return cmd | (((ch >> 1) | (ch & 0x01) << 2) << 4);
}
-/* Update data for the device (all 8 channels) */
-static struct ads7828_data *ads7828_update_device(struct device *dev)
-{
- struct ads7828_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
- || !data->valid) {
- unsigned int ch;
- dev_dbg(&client->dev, "Starting ads7828 update\n");
-
- for (ch = 0; ch < ADS7828_NCH; ch++) {
- u8 cmd = ads7828_cmd_byte(data->cmd_byte, ch);
- data->adc_input[ch] = data->read_channel(client, cmd);
- }
- data->last_updated = jiffies;
- data->valid = true;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
/* sysfs callback function */
static ssize_t ads7828_show_in(struct device *dev, struct device_attribute *da,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- struct ads7828_data *data = ads7828_update_device(dev);
- unsigned int value = DIV_ROUND_CLOSEST(data->adc_input[attr->index] *
- data->lsb_resol, 1000);
+ struct ads7828_data *data = dev_get_drvdata(dev);
+ u8 cmd = ads7828_cmd_byte(data->cmd_byte, attr->index);
+ unsigned int regval;
+ int err;
- return sprintf(buf, "%d\n", value);
+ err = regmap_read(data->regmap, cmd, &regval);
+ if (err < 0)
+ return err;
+
+ return sprintf(buf, "%d\n",
+ DIV_ROUND_CLOSEST(regval * data->lsb_resol, 1000));
}
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ads7828_show_in, NULL, 0);
@@ -130,6 +100,16 @@ static struct attribute *ads7828_attrs[] = {
ATTRIBUTE_GROUPS(ads7828);
+static const struct regmap_config ads2828_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+};
+
+static const struct regmap_config ads2830_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
static int ads7828_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -137,42 +117,40 @@ static int ads7828_probe(struct i2c_client *client,
struct ads7828_platform_data *pdata = dev_get_platdata(dev);
struct ads7828_data *data;
struct device *hwmon_dev;
+ unsigned int vref_mv = ADS7828_INT_VREF_MV;
+ bool diff_input = false;
+ bool ext_vref = false;
data = devm_kzalloc(dev, sizeof(struct ads7828_data), GFP_KERNEL);
if (!data)
return -ENOMEM;
if (pdata) {
- data->diff_input = pdata->diff_input;
- data->ext_vref = pdata->ext_vref;
- if (data->ext_vref)
- data->vref_mv = pdata->vref_mv;
+ diff_input = pdata->diff_input;
+ ext_vref = pdata->ext_vref;
+ if (ext_vref && pdata->vref_mv)
+ vref_mv = pdata->vref_mv;
}
- /* Bound Vref with min/max values if it was provided */
- if (data->vref_mv)
- data->vref_mv = clamp_val(data->vref_mv,
- ADS7828_EXT_VREF_MV_MIN,
- ADS7828_EXT_VREF_MV_MAX);
- else
- data->vref_mv = ADS7828_INT_VREF_MV;
+ /* Bound Vref with min/max values */
+ vref_mv = clamp_val(vref_mv, ADS7828_EXT_VREF_MV_MIN,
+ ADS7828_EXT_VREF_MV_MAX);
/* ADS7828 uses 12-bit samples, while ADS7830 is 8-bit */
if (id->driver_data == ads7828) {
- data->lsb_resol = DIV_ROUND_CLOSEST(data->vref_mv * 1000, 4096);
- data->read_channel = i2c_smbus_read_word_swapped;
+ data->lsb_resol = DIV_ROUND_CLOSEST(vref_mv * 1000, 4096);
+ data->regmap = devm_regmap_init_i2c(client,
+ &ads2828_regmap_config);
} else {
- data->lsb_resol = DIV_ROUND_CLOSEST(data->vref_mv * 1000, 256);
- data->read_channel = i2c_smbus_read_byte_data;
+ data->lsb_resol = DIV_ROUND_CLOSEST(vref_mv * 1000, 256);
+ data->regmap = devm_regmap_init_i2c(client,
+ &ads2830_regmap_config);
}
- data->cmd_byte = data->ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3;
- if (!data->diff_input)
+ data->cmd_byte = ext_vref ? ADS7828_CMD_PD1 : ADS7828_CMD_PD3;
+ if (!diff_input)
data->cmd_byte |= ADS7828_CMD_SD_SE;
- data->client = client;
- mutex_init(&data->update_lock);
-
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
data,
ads7828_groups);
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index e01feba909c3..d1542b7d4bc3 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -35,6 +35,7 @@
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/of.h>
+#include <linux/delay.h>
#include <linux/platform_data/ina2xx.h>
@@ -51,7 +52,6 @@
#define INA226_ALERT_LIMIT 0x07
#define INA226_DIE_ID 0xFF
-
/* register count */
#define INA219_REGISTERS 6
#define INA226_REGISTERS 8
@@ -64,6 +64,24 @@
/* worst case is 68.10 ms (~14.6Hz, ina219) */
#define INA2XX_CONVERSION_RATE 15
+#define INA2XX_MAX_DELAY 69 /* worst case delay in ms */
+
+#define INA2XX_RSHUNT_DEFAULT 10000
+
+/* bit mask for reading the averaging setting in the configuration register */
+#define INA226_AVG_RD_MASK 0x0E00
+
+#define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9)
+#define INA226_SHIFT_AVG(val) ((val) << 9)
+
+/* common attrs, ina226 attrs and NULL */
+#define INA2XX_MAX_ATTRIBUTE_GROUPS 3
+
+/*
+ * Both bus voltage and shunt voltage conversion times for ina226 are set
+ * to 0b0100 on POR, which translates to 2200 microseconds in total.
+ */
+#define INA226_TOTAL_CONV_TIME_DEFAULT 2200
enum ina2xx_ids { ina219, ina226 };
@@ -81,11 +99,16 @@ struct ina2xx_data {
struct i2c_client *client;
const struct ina2xx_config *config;
+ long rshunt;
+ u16 curr_config;
+
struct mutex update_lock;
bool valid;
unsigned long last_updated;
+ int update_interval; /* in jiffies */
int kind;
+ const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
u16 regs[INA2XX_MAX_REGISTERS];
};
@@ -110,34 +133,156 @@ static const struct ina2xx_config ina2xx_config[] = {
},
};
-static struct ina2xx_data *ina2xx_update_device(struct device *dev)
+/*
+ * Available averaging rates for ina226. The indices correspond with
+ * the bit values expected by the chip (according to the ina226 datasheet,
+ * table 3 AVG bit settings, found at
+ * http://www.ti.com/lit/ds/symlink/ina226.pdf.
+ */
+static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
+
+static int ina226_avg_bits(int avg)
+{
+ int i;
+
+ /* Get the closest average from the tab. */
+ for (i = 0; i < ARRAY_SIZE(ina226_avg_tab) - 1; i++) {
+ if (avg <= (ina226_avg_tab[i] + ina226_avg_tab[i + 1]) / 2)
+ break;
+ }
+
+ return i; /* Return 0b0111 for values greater than 1024. */
+}
+
+static int ina226_reg_to_interval(u16 config)
+{
+ int avg = ina226_avg_tab[INA226_READ_AVG(config)];
+
+ /*
+ * Multiply the total conversion time by the number of averages.
+ * Return the result in milliseconds.
+ */
+ return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000);
+}
+
+static u16 ina226_interval_to_reg(int interval, u16 config)
+{
+ int avg, avg_bits;
+
+ avg = DIV_ROUND_CLOSEST(interval * 1000,
+ INA226_TOTAL_CONV_TIME_DEFAULT);
+ avg_bits = ina226_avg_bits(avg);
+
+ return (config & ~INA226_AVG_RD_MASK) | INA226_SHIFT_AVG(avg_bits);
+}
+
+static void ina226_set_update_interval(struct ina2xx_data *data)
+{
+ int ms;
+
+ ms = ina226_reg_to_interval(data->curr_config);
+ data->update_interval = msecs_to_jiffies(ms);
+}
+
+static int ina2xx_calibrate(struct ina2xx_data *data)
+{
+ u16 val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
+ data->rshunt);
+
+ return i2c_smbus_write_word_swapped(data->client,
+ INA2XX_CALIBRATION, val);
+}
+
+/*
+ * Initialize the configuration and calibration registers.
+ */
+static int ina2xx_init(struct ina2xx_data *data)
{
- struct ina2xx_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
- struct ina2xx_data *ret = data;
+ int ret;
- mutex_lock(&data->update_lock);
+ /* device configuration */
+ ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ data->curr_config);
+ if (ret < 0)
+ return ret;
- if (time_after(jiffies, data->last_updated +
- HZ / INA2XX_CONVERSION_RATE) || !data->valid) {
+ /*
+ * Set current LSB to 1mA, shunt is in uOhms
+ * (equation 13 in datasheet).
+ */
+ return ina2xx_calibrate(data);
+}
- int i;
+static int ina2xx_do_update(struct device *dev)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ struct i2c_client *client = data->client;
+ int i, rv, retry;
- dev_dbg(&client->dev, "Starting ina2xx update\n");
+ dev_dbg(&client->dev, "Starting ina2xx update\n");
+ for (retry = 5; retry; retry--) {
/* Read all registers */
for (i = 0; i < data->config->registers; i++) {
- int rv = i2c_smbus_read_word_swapped(client, i);
- if (rv < 0) {
- ret = ERR_PTR(rv);
- goto abort;
- }
+ rv = i2c_smbus_read_word_swapped(client, i);
+ if (rv < 0)
+ return rv;
data->regs[i] = rv;
}
+
+ /*
+ * If the current value in the calibration register is 0, the
+ * power and current registers will also remain at 0. In case
+ * the chip has been reset let's check the calibration
+ * register and reinitialize if needed.
+ */
+ if (data->regs[INA2XX_CALIBRATION] == 0) {
+ dev_warn(dev, "chip not calibrated, reinitializing\n");
+
+ rv = ina2xx_init(data);
+ if (rv < 0)
+ return rv;
+
+ /*
+ * Let's make sure the power and current registers
+ * have been updated before trying again.
+ */
+ msleep(INA2XX_MAX_DELAY);
+ continue;
+ }
+
data->last_updated = jiffies;
data->valid = 1;
+
+ return 0;
}
-abort:
+
+ /*
+ * If we're here then although all write operations succeeded, the
+ * chip still returns 0 in the calibration register. Nothing more we
+ * can do here.
+ */
+ dev_err(dev, "unable to reinitialize the chip\n");
+ return -ENODEV;
+}
+
+static struct ina2xx_data *ina2xx_update_device(struct device *dev)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ struct ina2xx_data *ret = data;
+ unsigned long after;
+ int rv;
+
+ mutex_lock(&data->update_lock);
+
+ after = data->last_updated + data->update_interval;
+ if (time_after(jiffies, after) || !data->valid) {
+ rv = ina2xx_do_update(dev);
+ if (rv < 0)
+ ret = ERR_PTR(rv);
+ }
+
mutex_unlock(&data->update_lock);
return ret;
}
@@ -164,6 +309,10 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg)
/* signed register, LSB=1mA (selected), in mA */
val = (s16)data->regs[reg];
break;
+ case INA2XX_CALIBRATION:
+ val = DIV_ROUND_CLOSEST(data->config->calibration_factor,
+ data->regs[reg]);
+ break;
default:
/* programmer goofed */
WARN_ON_ONCE(1);
@@ -187,6 +336,85 @@ static ssize_t ina2xx_show_value(struct device *dev,
ina2xx_get_value(data, attr->index));
}
+static ssize_t ina2xx_set_shunt(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct ina2xx_data *data = ina2xx_update_device(dev);
+ unsigned long val;
+ int status;
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ status = kstrtoul(buf, 10, &val);
+ if (status < 0)
+ return status;
+
+ if (val == 0 ||
+ /* Values greater than the calibration factor make no sense. */
+ val > data->config->calibration_factor)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->rshunt = val;
+ status = ina2xx_calibrate(data);
+ mutex_unlock(&data->update_lock);
+ if (status < 0)
+ return status;
+
+ return count;
+}
+
+static ssize_t ina226_set_interval(struct device *dev,
+ struct device_attribute *da,
+ const char *buf, size_t count)
+{
+ struct ina2xx_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int status;
+
+ status = kstrtoul(buf, 10, &val);
+ if (status < 0)
+ return status;
+
+ if (val > INT_MAX || val == 0)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ data->curr_config = ina226_interval_to_reg(val,
+ data->regs[INA2XX_CONFIG]);
+ status = i2c_smbus_write_word_swapped(data->client,
+ INA2XX_CONFIG,
+ data->curr_config);
+
+ ina226_set_update_interval(data);
+ /* Make sure the next access re-reads all registers. */
+ data->valid = 0;
+ mutex_unlock(&data->update_lock);
+ if (status < 0)
+ return status;
+
+ return count;
+}
+
+static ssize_t ina226_show_interval(struct device *dev,
+ struct device_attribute *da, char *buf)
+{
+ struct ina2xx_data *data = ina2xx_update_device(dev);
+
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ /*
+ * We don't use data->update_interval here as we want to display
+ * the actual interval used by the chip and jiffies_to_msecs()
+ * doesn't seem to be accurate enough.
+ */
+ return snprintf(buf, PAGE_SIZE, "%d\n",
+ ina226_reg_to_interval(data->regs[INA2XX_CONFIG]));
+}
+
/* shunt voltage */
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_SHUNT_VOLTAGE);
@@ -203,15 +431,37 @@ static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
INA2XX_POWER);
+/* shunt resistance */
+static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
+ ina2xx_show_value, ina2xx_set_shunt,
+ INA2XX_CALIBRATION);
+
+/* update interval (ina226 only) */
+static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
+ ina226_show_interval, ina226_set_interval, 0);
+
/* pointers to created device attributes */
static struct attribute *ina2xx_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ &sensor_dev_attr_shunt_resistor.dev_attr.attr,
NULL,
};
-ATTRIBUTE_GROUPS(ina2xx);
+
+static const struct attribute_group ina2xx_group = {
+ .attrs = ina2xx_attrs,
+};
+
+static struct attribute *ina226_attrs[] = {
+ &sensor_dev_attr_update_interval.dev_attr.attr,
+ NULL,
+};
+
+static const struct attribute_group ina226_group = {
+ .attrs = ina226_attrs,
+};
static int ina2xx_probe(struct i2c_client *client,
const struct i2c_device_id *id)
@@ -221,9 +471,8 @@ static int ina2xx_probe(struct i2c_client *client,
struct device *dev = &client->dev;
struct ina2xx_data *data;
struct device *hwmon_dev;
- long shunt = 10000; /* default shunt value 10mOhms */
u32 val;
- int ret;
+ int ret, group = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
@@ -234,50 +483,52 @@ static int ina2xx_probe(struct i2c_client *client,
if (dev_get_platdata(dev)) {
pdata = dev_get_platdata(dev);
- shunt = pdata->shunt_uohms;
+ data->rshunt = pdata->shunt_uohms;
} else if (!of_property_read_u32(dev->of_node,
"shunt-resistor", &val)) {
- shunt = val;
+ data->rshunt = val;
+ } else {
+ data->rshunt = INA2XX_RSHUNT_DEFAULT;
}
- if (shunt <= 0)
- return -ENODEV;
-
/* set the device type */
data->kind = id->driver_data;
data->config = &ina2xx_config[data->kind];
-
- /* device configuration */
- ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
- data->config->config_default);
- if (ret < 0) {
- dev_err(dev,
- "error writing to the config register: %d", ret);
- return -ENODEV;
- }
+ data->curr_config = data->config->config_default;
+ data->client = client;
/*
- * Set current LSB to 1mA, shunt is in uOhms
- * (equation 13 in datasheet).
+ * Ina226 has a variable update_interval. For ina219 we
+ * use a constant value.
*/
- ret = i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
- data->config->calibration_factor / shunt);
+ if (data->kind == ina226)
+ ina226_set_update_interval(data);
+ else
+ data->update_interval = HZ / INA2XX_CONVERSION_RATE;
+
+ if (data->rshunt <= 0 ||
+ data->rshunt > data->config->calibration_factor)
+ return -ENODEV;
+
+ ret = ina2xx_init(data);
if (ret < 0) {
- dev_err(dev,
- "error writing to the calibration register: %d", ret);
+ dev_err(dev, "error configuring the device: %d\n", ret);
return -ENODEV;
}
- data->client = client;
mutex_init(&data->update_lock);
+ data->groups[group++] = &ina2xx_group;
+ if (data->kind == ina226)
+ data->groups[group++] = &ina226_group;
+
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
- data, ina2xx_groups);
+ data, data->groups);
if (IS_ERR(hwmon_dev))
return PTR_ERR(hwmon_dev);
dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
- id->name, shunt);
+ id->name, data->rshunt);
return 0;
}
@@ -287,6 +538,7 @@ static const struct i2c_device_id ina2xx_id[] = {
{ "ina220", ina219 },
{ "ina226", ina226 },
{ "ina230", ina226 },
+ { "ina231", ina226 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
index 388f8bcd898e..996bdfd5cf25 100644
--- a/drivers/hwmon/jc42.c
+++ b/drivers/hwmon/jc42.c
@@ -201,7 +201,7 @@ struct jc42_data {
#define JC42_TEMP_MIN 0
#define JC42_TEMP_MAX 125000
-static u16 jc42_temp_to_reg(int temp, bool extended)
+static u16 jc42_temp_to_reg(long temp, bool extended)
{
int ntemp = clamp_val(temp,
extended ? JC42_TEMP_MIN_EXTENDED :
@@ -213,11 +213,7 @@ static u16 jc42_temp_to_reg(int temp, bool extended)
static int jc42_temp_from_reg(s16 reg)
{
- reg &= 0x1fff;
-
- /* sign extend register */
- if (reg & 0x1000)
- reg |= 0xf000;
+ reg = sign_extend32(reg, 12);
/* convert from 0.0625 to 0.001 resolution */
return reg * 125 / 2;
@@ -308,15 +304,18 @@ static ssize_t set_temp_crit_hyst(struct device *dev,
const char *buf, size_t count)
{
struct jc42_data *data = dev_get_drvdata(dev);
- unsigned long val;
+ long val;
int diff, hyst;
int err;
int ret = count;
- if (kstrtoul(buf, 10, &val) < 0)
+ if (kstrtol(buf, 10, &val) < 0)
return -EINVAL;
+ val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED :
+ JC42_TEMP_MIN) - 6000, JC42_TEMP_MAX);
diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
+
hyst = 0;
if (diff > 0) {
if (diff < 2250)
diff --git a/drivers/hwmon/nct7802.c b/drivers/hwmon/nct7802.c
index ec5678289e4a..55765790907b 100644
--- a/drivers/hwmon/nct7802.c
+++ b/drivers/hwmon/nct7802.c
@@ -779,7 +779,7 @@ static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
return reg != REG_BANK && reg <= 0x20;
}
-static struct regmap_config nct7802_regmap_config = {
+static const struct regmap_config nct7802_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index ba9f478f64ee..9da2735f1424 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -253,7 +253,7 @@ static int tmp102_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int tmp102_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
@@ -279,17 +279,10 @@ static int tmp102_resume(struct device *dev)
config &= ~TMP102_CONF_SD;
return i2c_smbus_write_word_swapped(client, TMP102_CONF_REG, config);
}
-
-static const struct dev_pm_ops tmp102_dev_pm_ops = {
- .suspend = tmp102_suspend,
- .resume = tmp102_resume,
-};
-
-#define TMP102_DEV_PM_OPS (&tmp102_dev_pm_ops)
-#else
-#define TMP102_DEV_PM_OPS NULL
#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(tmp102_dev_pm_ops, tmp102_suspend, tmp102_resume);
+
static const struct i2c_device_id tmp102_id[] = {
{ "tmp102", 0 },
{ }
@@ -298,7 +291,7 @@ MODULE_DEVICE_TABLE(i2c, tmp102_id);
static struct i2c_driver tmp102_driver = {
.driver.name = DRIVER_NAME,
- .driver.pm = TMP102_DEV_PM_OPS,
+ .driver.pm = &tmp102_dev_pm_ops,
.probe = tmp102_probe,
.remove = tmp102_remove,
.id_table = tmp102_id,