media: davinci: remove vpbe support

The davinci dm3xx/dm644x platforms are gone now, and the remaining
da8xx platforms do not use the vpbe driver, so the driver can be
removed as well.

Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

20 files changed, 0 insertions, 6690 deletions

diff --git a/Documentation/admin-guide/media/davinci-vpbe.rst b/Documentation/admin-guide/media/davinci-vpbe.rst
deleted file mode 100644
index 9e6360fd02db..000000000000
--- a/Documentation/admin-guide/media/davinci-vpbe.rst
+++ /dev/null
@@ -1,65 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The VPBE V4L2 driver design
-===========================
-
-Functional partitioning
------------------------
-
-Consists of the following:
-
- 1. V4L2 display driver
-
-    Implements creation of video2 and video3 device nodes and
-    provides v4l2 device interface to manage VID0 and VID1 layers.
-
- 2. Display controller
-
-    Loads up VENC, OSD and external encoders such as ths8200. It provides
-    a set of API calls to V4L2 drivers to set the output/standards
-    in the VENC or external sub devices. It also provides
-    a device object to access the services from OSD subdevice
-    using sub device ops. The connection of external encoders to VENC LCD
-    controller port is done at init time based on default output and standard
-    selection or at run time when application change the output through
-    V4L2 IOCTLs.
-
-    When connected to an external encoder, vpbe controller is also responsible
-    for setting up the interface between VENC and external encoders based on
-    board specific settings (specified in board-xxx-evm.c). This allows
-    interfacing external encoders such as ths8200. The setup_if_config()
-    is implemented for this as well as configure_venc() (part of the next patch)
-    API to set timings in VENC for a specific display resolution. As of this
-    patch series, the interconnection and enabling and setting of the external
-    encoders is not present, and would be a part of the next patch series.
-
- 3. VENC subdevice module
-
-    Responsible for setting outputs provided through internal DACs and also
-    setting timings at LCD controller port when external encoders are connected
-    at the port or LCD panel timings required. When external encoder/LCD panel
-    is connected, the timings for a specific standard/preset is retrieved from
-    the board specific table and the values are used to set the timings in
-    venc using non-standard timing mode.
-
-    Support LCD Panel displays using the VENC. For example to support a Logic
-    PD display, it requires setting up the LCD controller port with a set of
-    timings for the resolution supported and setting the dot clock. So we could
-    add the available outputs as a board specific entry (i.e add the "LogicPD"
-    output name to board-xxx-evm.c). A table of timings for various LCDs
-    supported can be maintained in the board specific setup file to support
-    various LCD displays.As of this patch a basic driver is present, and this
-    support for external encoders and displays forms a part of the next
-    patch series.
-
- 4. OSD module
-
-    OSD module implements all OSD layer management and hardware specific
-    features. The VPBE module interacts with the OSD for enabling and
-    disabling appropriate features of the OSD.
-
-Current status
---------------
-
-A fully functional working version of the V4L2 driver is available. This
-driver has been tested with NTSC and PAL standards and buffer streaming.
diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst
index ac73c4166d1e..8ef57cd13dec 100644
--- a/Documentation/admin-guide/media/platform-cardlist.rst
+++ b/Documentation/admin-guide/media/platform-cardlist.rst
@@ -73,7 +73,6 @@ via-camera         VIAFB camera controller
 video-mux          Video Multiplexer
 vpif_display       TI DaVinci VPIF V4L2-Display
 vpif_capture       TI DaVinci VPIF video capture
-vpss               TI DaVinci VPBE V4L2-Display
 vsp1               Renesas VSP1 Video Processing Engine
 xilinx-tpg         Xilinx Video Test Pattern Generator
 xilinx-video       Xilinx Video IP (EXPERIMENTAL)
diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
index 90a026ee05c6..734e18c310bd 100644
--- a/Documentation/admin-guide/media/v4l-drivers.rst
+++ b/Documentation/admin-guide/media/v4l-drivers.rst
@@ -13,7 +13,6 @@ Video4Linux (V4L) driver-specific documentation
 	cafe_ccic
 	cpia2
 	cx88
-	davinci-vpbe
 	fimc
 	imx
 	imx7
diff --git a/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst b/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst
deleted file mode 100644
index 4e87bdbc7ae4..000000000000
--- a/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-The VPBE V4L2 driver design
-===========================
-
-File partitioning
------------------
-
- V4L2 display device driver
-         drivers/media/platform/ti/davinci/vpbe_display.c
-         drivers/media/platform/ti/davinci/vpbe_display.h
-
- VPBE display controller
-         drivers/media/platform/ti/davinci/vpbe.c
-         drivers/media/platform/ti/davinci/vpbe.h
-
- VPBE venc sub device driver
-         drivers/media/platform/ti/davinci/vpbe_venc.c
-         drivers/media/platform/ti/davinci/vpbe_venc.h
-         drivers/media/platform/ti/davinci/vpbe_venc_regs.h
-
- VPBE osd driver
-         drivers/media/platform/ti/davinci/vpbe_osd.c
-         drivers/media/platform/ti/davinci/vpbe_osd.h
-         drivers/media/platform/ti/davinci/vpbe_osd_regs.h
-
-To be done
-----------
-
-vpbe display controller
-    - Add support for external encoders.
-    - add support for selecting external encoder as default at probe time.
-
-vpbe venc sub device
-    - add timings for supporting ths8200
-    - add support for LogicPD LCD.
-
-FB drivers
-    - Add support for fbdev drivers.- Ready and part of subsequent patches.
diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst
index 32406490557c..3c17d48f83c0 100644
--- a/Documentation/driver-api/media/drivers/index.rst
+++ b/Documentation/driver-api/media/drivers/index.rst
@@ -16,7 +16,6 @@ Video4Linux (V4L) drivers
 	cpia2_devel
 	cx2341x-devel
 	cx88-devel
-	davinci-vpbe-devel
 	fimc-devel
 	pvrusb2
 	pxa_camera
diff --git a/drivers/media/platform/ti/davinci/Kconfig b/drivers/media/platform/ti/davinci/Kconfig
index 96d4bed7fe9e..542a602e66be 100644
--- a/drivers/media/platform/ti/davinci/Kconfig
+++ b/drivers/media/platform/ti/davinci/Kconfig
@@ -31,19 +31,3 @@ config VIDEO_DAVINCI_VPIF_CAPTURE
 
 	  To compile this driver as a module, choose M here. There will
 	  be two modules called vpif.ko and vpif_capture.ko
-
-config VIDEO_DAVINCI_VPBE_DISPLAY
-	tristate "TI DaVinci VPBE V4L2-Display driver"
-	depends on V4L_PLATFORM_DRIVERS
-	depends on VIDEO_DEV
-	depends on ARCH_DAVINCI || COMPILE_TEST
-	depends on I2C
-	select VIDEOBUF2_DMA_CONTIG
-	help
-	    Enables Davinci VPBE module used for display devices.
-	    This module is used for display on TI DM644x/DM365/DM355
-	    based display devices.
-
-	    To compile this driver as a module, choose M here. There will
-	    be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
-	    vpbe_venc.ko and vpbe_display.ko
diff --git a/drivers/media/platform/ti/davinci/Makefile b/drivers/media/platform/ti/davinci/Makefile
index b20a91653162..512f03369bae 100644
--- a/drivers/media/platform/ti/davinci/Makefile
+++ b/drivers/media/platform/ti/davinci/Makefile
@@ -7,6 +7,3 @@
 obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif.o vpif_display.o
 #VPIF Capture driver
 obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif.o vpif_capture.o
-
-obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpss.o vpbe.o vpbe_osd.o \
-	vpbe_venc.o vpbe_display.o
diff --git a/drivers/media/platform/ti/davinci/vpbe.c b/drivers/media/platform/ti/davinci/vpbe.c
deleted file mode 100644
index 509ecc84624e..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe.c
+++ /dev/null
@@ -1,840 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpss.h>
-#include <media/davinci/vpbe_venc.h>
-
-#define VPBE_DEFAULT_OUTPUT	"Composite"
-#define VPBE_DEFAULT_MODE	"ntsc"
-
-static char *def_output = VPBE_DEFAULT_OUTPUT;
-static char *def_mode = VPBE_DEFAULT_MODE;
-static int debug;
-
-module_param(def_output, charp, S_IRUGO);
-module_param(def_mode, charp, S_IRUGO);
-module_param(debug, int, 0644);
-
-MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)");
-MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc");
-MODULE_PARM_DESC(debug, "Debug level 0-1");
-
-MODULE_DESCRIPTION("TI DMXXX VPBE Display controller");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
-
-/**
- * vpbe_current_encoder_info - Get config info for current encoder
- * @vpbe_dev: vpbe device ptr
- *
- * Return ptr to current encoder config info
- */
-static struct encoder_config_info*
-vpbe_current_encoder_info(struct vpbe_device *vpbe_dev)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int index = vpbe_dev->current_sd_index;
-
-	return ((index == 0) ? &cfg->venc :
-				&cfg->ext_encoders[index-1]);
-}
-
-/**
- * vpbe_find_encoder_sd_index - Given a name find encoder sd index
- *
- * @cfg: ptr to vpbe cfg
- * @index: index used by application
- *
- * Return sd index of the encoder
- */
-static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg,
-			     int index)
-{
-	char *encoder_name = cfg->outputs[index].subdev_name;
-	int i;
-
-	/* Venc is always first	*/
-	if (!strcmp(encoder_name, cfg->venc.module_name))
-		return 0;
-
-	for (i = 0; i < cfg->num_ext_encoders; i++) {
-		if (!strcmp(encoder_name,
-		     cfg->ext_encoders[i].module_name))
-			return i+1;
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_enum_outputs - enumerate outputs
- * @vpbe_dev: vpbe device ptr
- * @output: ptr to v4l2_output structure
- *
- * Enumerates the outputs available at the vpbe display
- * returns the status, -EINVAL if end of output list
- */
-static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev,
-			     struct v4l2_output *output)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	unsigned int temp_index = output->index;
-
-	if (temp_index >= cfg->num_outputs)
-		return -EINVAL;
-
-	*output = cfg->outputs[temp_index].output;
-	output->index = temp_index;
-
-	return 0;
-}
-
-static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode,
-			      int output_index)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = output_index;
-	int i;
-
-	if (!mode)
-		return -EINVAL;
-
-	for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if (!strcmp(mode, var.name)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev,
-				      struct vpbe_enc_mode_info *mode_info)
-{
-	if (!mode_info)
-		return -EINVAL;
-
-	*mode_info = vpbe_dev->current_timings;
-
-	return 0;
-}
-
-/* Get std by std id */
-static int vpbe_get_std_info(struct vpbe_device *vpbe_dev,
-			     v4l2_std_id std_id)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = vpbe_dev->current_out_index;
-	int i;
-
-	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if ((var.timings_type & VPBE_ENC_STD) &&
-		  (var.std_id & std_id)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev,
-				char *std_name)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct vpbe_enc_mode_info var;
-	int curr_output = vpbe_dev->current_out_index;
-	int i;
-
-	for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) {
-		var = cfg->outputs[curr_output].modes[i];
-		if (!strcmp(var.name, std_name)) {
-			vpbe_dev->current_timings = var;
-			return 0;
-		}
-	}
-
-	return -EINVAL;
-}
-
-/**
- * vpbe_set_output - Set output
- * @vpbe_dev: vpbe device ptr
- * @index: index of output
- *
- * Set vpbe output to the output specified by the index
- */
-static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index)
-{
-	struct encoder_config_info *curr_enc_info =
-			vpbe_current_encoder_info(vpbe_dev);
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct venc_platform_data *venc_device = vpbe_dev->venc_device;
-	int enc_out_index;
-	int sd_index;
-	int ret;
-
-	if (index >= cfg->num_outputs)
-		return -EINVAL;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	sd_index = vpbe_dev->current_sd_index;
-	enc_out_index = cfg->outputs[index].output.index;
-	/*
-	 * Currently we switch the encoder based on output selected
-	 * by the application. If media controller is implemented later
-	 * there is will be an API added to setup_link between venc
-	 * and external encoder. So in that case below comparison always
-	 * match and encoder will not be switched. But if application
-	 * chose not to use media controller, then this provides current
-	 * way of switching encoder at the venc output.
-	 */
-	if (strcmp(curr_enc_info->module_name,
-		   cfg->outputs[index].subdev_name)) {
-		/* Need to switch the encoder at the output */
-		sd_index = vpbe_find_encoder_sd_index(cfg, index);
-		if (sd_index < 0) {
-			ret = -EINVAL;
-			goto unlock;
-		}
-
-		ret = venc_device->setup_if_config(cfg->outputs[index].if_params);
-		if (ret)
-			goto unlock;
-	}
-
-	/* Set output at the encoder */
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-				       s_routing, 0, enc_out_index, 0);
-	if (ret)
-		goto unlock;
-
-	/*
-	 * It is assumed that venc or external encoder will set a default
-	 * mode in the sub device. For external encoder or LCD pannel output,
-	 * we also need to set up the lcd port for the required mode. So setup
-	 * the lcd port for the default mode that is configured in the board
-	 * arch/arm/mach-davinci/board-dm355-evm.setup file for the external
-	 * encoder.
-	 */
-	ret = vpbe_get_mode_info(vpbe_dev,
-				 cfg->outputs[index].default_mode, index);
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-			vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-		vpbe_dev->current_sd_index = sd_index;
-		vpbe_dev->current_out_index = index;
-	}
-unlock:
-	mutex_unlock(&vpbe_dev->lock);
-	return ret;
-}
-
-static int vpbe_set_default_output(struct vpbe_device *vpbe_dev)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int i;
-
-	for (i = 0; i < cfg->num_outputs; i++) {
-		if (!strcmp(def_output,
-			    cfg->outputs[i].output.name)) {
-			int ret = vpbe_set_output(vpbe_dev, i);
-
-			if (!ret)
-				vpbe_dev->current_out_index = i;
-			return ret;
-		}
-	}
-	return 0;
-}
-
-/**
- * vpbe_get_output - Get output
- * @vpbe_dev: vpbe device ptr
- *
- * return current vpbe output to the index
- */
-static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev)
-{
-	return vpbe_dev->current_out_index;
-}
-
-/*
- * vpbe_s_dv_timings - Set the given preset timings in the encoder
- *
- * Sets the timings if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev,
-		    struct v4l2_dv_timings *dv_timings)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	struct vpbe_output *output = &cfg->outputs[out_index];
-	int sd_index = vpbe_dev->current_sd_index;
-	int ret, i;
-
-
-	if (!(cfg->outputs[out_index].output.capabilities &
-	    V4L2_OUT_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	for (i = 0; i < output->num_modes; i++) {
-		if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS &&
-		    !memcmp(&output->modes[i].dv_timings,
-				dv_timings, sizeof(*dv_timings)))
-			break;
-	}
-	if (i >= output->num_modes)
-		return -EINVAL;
-	vpbe_dev->current_timings = output->modes[i];
-	mutex_lock(&vpbe_dev->lock);
-
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-					s_dv_timings, dv_timings);
-	if (!ret && vpbe_dev->amp) {
-		/* Call amplifier subdevice */
-		ret = v4l2_subdev_call(vpbe_dev->amp, video,
-				s_dv_timings, dv_timings);
-	}
-	/* set the lcd controller output for the given mode */
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-	}
-	mutex_unlock(&vpbe_dev->lock);
-
-	return ret;
-}
-
-/*
- * vpbe_g_dv_timings - Get the timings in the current encoder
- *
- * Get the timings in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_g_dv_timings(struct vpbe_device *vpbe_dev,
-		     struct v4l2_dv_timings *dv_timings)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-
-	if (!(cfg->outputs[out_index].output.capabilities &
-		V4L2_OUT_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	if (vpbe_dev->current_timings.timings_type &
-	  VPBE_ENC_DV_TIMINGS) {
-		*dv_timings = vpbe_dev->current_timings.dv_timings;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder
- *
- * Get the timings in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_enum_dv_timings(struct vpbe_device *vpbe_dev,
-			 struct v4l2_enum_dv_timings *timings)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	struct vpbe_output *output = &cfg->outputs[out_index];
-	int j = 0;
-	int i;
-
-	if (!(output->output.capabilities & V4L2_OUT_CAP_DV_TIMINGS))
-		return -ENODATA;
-
-	for (i = 0; i < output->num_modes; i++) {
-		if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS) {
-			if (j == timings->index)
-				break;
-			j++;
-		}
-	}
-
-	if (i == output->num_modes)
-		return -EINVAL;
-	timings->timings = output->modes[i].dv_timings;
-	return 0;
-}
-
-/*
- * vpbe_s_std - Set the given standard in the encoder
- *
- * Sets the standard if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id std_id)
-{
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-	int sd_index = vpbe_dev->current_sd_index;
-	int ret;
-
-	if (!(cfg->outputs[out_index].output.capabilities &
-		V4L2_OUT_CAP_STD))
-		return -ENODATA;
-
-	ret = vpbe_get_std_info(vpbe_dev, std_id);
-	if (ret)
-		return ret;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video,
-			       s_std_output, std_id);
-	/* set the lcd controller output for the given mode */
-	if (!ret) {
-		struct osd_state *osd_device = vpbe_dev->osd_device;
-
-		osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-		osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-	}
-	mutex_unlock(&vpbe_dev->lock);
-
-	return ret;
-}
-
-/*
- * vpbe_g_std - Get the standard in the current encoder
- *
- * Get the standard in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id)
-{
-	struct vpbe_enc_mode_info *cur_timings = &vpbe_dev->current_timings;
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	int out_index = vpbe_dev->current_out_index;
-
-	if (!(cfg->outputs[out_index].output.capabilities & V4L2_OUT_CAP_STD))
-		return -ENODATA;
-
-	if (cur_timings->timings_type & VPBE_ENC_STD) {
-		*std_id = cur_timings->std_id;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * vpbe_set_mode - Set mode in the current encoder using mode info
- *
- * Use the mode string to decide what timings to set in the encoder
- * This is typically useful when fbset command is used to change the current
- * timings by specifying a string to indicate the timings.
- */
-static int vpbe_set_mode(struct vpbe_device *vpbe_dev,
-			 struct vpbe_enc_mode_info *mode_info)
-{
-	struct vpbe_enc_mode_info *preset_mode = NULL;
-	struct vpbe_config *cfg = vpbe_dev->cfg;
-	struct v4l2_dv_timings dv_timings;
-	struct osd_state *osd_device;
-	int out_index = vpbe_dev->current_out_index;
-	int i;
-
-	if (!mode_info || !mode_info->name)
-		return -EINVAL;
-
-	for (i = 0; i < cfg->outputs[out_index].num_modes; i++) {
-		if (!strcmp(mode_info->name,
-		     cfg->outputs[out_index].modes[i].name)) {
-			preset_mode = &cfg->outputs[out_index].modes[i];
-			/*
-			 * it may be one of the 3 timings type. Check and
-			 * invoke right API
-			 */
-			if (preset_mode->timings_type & VPBE_ENC_STD)
-				return vpbe_s_std(vpbe_dev,
-						 preset_mode->std_id);
-			if (preset_mode->timings_type &
-						VPBE_ENC_DV_TIMINGS) {
-				dv_timings =
-					preset_mode->dv_timings;
-				return vpbe_s_dv_timings(vpbe_dev, &dv_timings);
-			}
-		}
-	}
-
-	/* Only custom timing should reach here */
-	if (!preset_mode)
-		return -EINVAL;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	osd_device = vpbe_dev->osd_device;
-	vpbe_dev->current_timings = *preset_mode;
-	osd_device->ops.set_left_margin(osd_device,
-		vpbe_dev->current_timings.left_margin);
-	osd_device->ops.set_top_margin(osd_device,
-		vpbe_dev->current_timings.upper_margin);
-
-	mutex_unlock(&vpbe_dev->lock);
-	return 0;
-}
-
-static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev)
-{
-	int ret;
-
-	ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode);
-	if (ret)
-		return ret;
-
-	/* set the default mode in the encoder */
-	return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings);
-}
-
-static int platform_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct vpbe_device *vpbe_dev = data;
-
-	if (strstr(pdev->name, "vpbe-osd"))
-		vpbe_dev->osd_device = platform_get_drvdata(pdev);
-	if (strstr(pdev->name, "vpbe-venc"))
-		vpbe_dev->venc_device = dev_get_platdata(&pdev->dev);
-
-	return 0;
-}
-
-/**
- * vpbe_initialize() - Initialize the vpbe display controller
- * @dev: Master and slave device ptr
- * @vpbe_dev: vpbe device ptr
- *
- * Master frame buffer device drivers calls this to initialize vpbe
- * display controller. This will then registers v4l2 device and the sub
- * devices and sets a current encoder sub device for display. v4l2 display
- * device driver is the master and frame buffer display device driver is
- * the slave. Frame buffer display driver checks the initialized during
- * probe and exit if not initialized. Returns status.
- */
-static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev)
-{
-	struct encoder_config_info *enc_info;
-	struct amp_config_info *amp_info;
-	struct v4l2_subdev **enc_subdev;
-	struct osd_state *osd_device;
-	struct i2c_adapter *i2c_adap;
-	int num_encoders;
-	int ret = 0;
-	int err;
-	int i;
-
-	/*
-	 * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer
-	 * from the platform device by iteration of platform drivers and
-	 * matching with device name
-	 */
-	if (!vpbe_dev || !dev) {
-		printk(KERN_ERR "Null device pointers.\n");
-		return -ENODEV;
-	}
-
-	if (vpbe_dev->initialized)
-		return 0;
-
-	mutex_lock(&vpbe_dev->lock);
-
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
-		/* We have dac clock available for platform */
-		vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac");
-		if (IS_ERR(vpbe_dev->dac_clk)) {
-			ret =  PTR_ERR(vpbe_dev->dac_clk);
-			goto fail_mutex_unlock;
-		}
-		if (clk_prepare_enable(vpbe_dev->dac_clk)) {
-			ret =  -ENODEV;
-			clk_put(vpbe_dev->dac_clk);
-			goto fail_mutex_unlock;
-		}
-	}
-
-	/* first enable vpss clocks */
-	vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
-
-	/* First register a v4l2 device */
-	ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev);
-	if (ret) {
-		v4l2_err(dev->driver,
-			"Unable to register v4l2 device.\n");
-		goto fail_clk_put;
-	}
-	v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n");
-
-	err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev,
-			       platform_device_get);
-	if (err < 0) {
-		ret = err;
-		goto fail_dev_unregister;
-	}
-
-	vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev,
-					   vpbe_dev->cfg->venc.module_name);
-	/* register venc sub device */
-	if (!vpbe_dev->venc) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"vpbe unable to init venc sub device\n");
-		ret = -ENODEV;
-		goto fail_dev_unregister;
-	}
-	/* initialize osd device */
-	osd_device = vpbe_dev->osd_device;
-	if (osd_device->ops.initialize) {
-		err = osd_device->ops.initialize(osd_device);
-		if (err) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				 "unable to initialize the OSD device");
-			ret = -ENOMEM;
-			goto fail_dev_unregister;
-		}
-	}
-
-	/*
-	 * Register any external encoders that are configured. At index 0 we
-	 * store venc sd index.
-	 */
-	num_encoders = vpbe_dev->cfg->num_ext_encoders + 1;
-	vpbe_dev->encoders = kmalloc_array(num_encoders,
-					   sizeof(*vpbe_dev->encoders),
-					   GFP_KERNEL);
-	if (!vpbe_dev->encoders) {
-		ret = -ENOMEM;
-		goto fail_dev_unregister;
-	}
-
-	i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id);
-	for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) {
-		if (i == 0) {
-			/* venc is at index 0 */
-			enc_subdev = &vpbe_dev->encoders[i];
-			*enc_subdev = vpbe_dev->venc;
-			continue;
-		}
-		enc_info = &vpbe_dev->cfg->ext_encoders[i];
-		if (enc_info->is_i2c) {
-			enc_subdev = &vpbe_dev->encoders[i];
-			*enc_subdev = v4l2_i2c_new_subdev_board(
-						&vpbe_dev->v4l2_dev, i2c_adap,
-						&enc_info->board_info, NULL);
-			if (*enc_subdev)
-				v4l2_info(&vpbe_dev->v4l2_dev,
-					  "v4l2 sub device %s registered\n",
-					  enc_info->module_name);
-			else {
-				v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register",
-					 enc_info->module_name);
-				ret = -ENODEV;
-				goto fail_kfree_encoders;
-			}
-		} else
-			v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported");
-	}
-	/* Add amplifier subdevice for dm365 */
-	if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) &&
-	   vpbe_dev->cfg->amp) {
-		amp_info = vpbe_dev->cfg->amp;
-		if (amp_info->is_i2c) {
-			vpbe_dev->amp = v4l2_i2c_new_subdev_board(
-			&vpbe_dev->v4l2_dev, i2c_adap,
-			&amp_info->board_info, NULL);
-			if (!vpbe_dev->amp) {
-				v4l2_err(&vpbe_dev->v4l2_dev,
-					 "amplifier %s failed to register",
-					 amp_info->module_name);
-				ret = -ENODEV;
-				goto fail_kfree_encoders;
-			}
-			v4l2_info(&vpbe_dev->v4l2_dev,
-					  "v4l2 sub device %s registered\n",
-					  amp_info->module_name);
-		} else {
-			    vpbe_dev->amp = NULL;
-			    v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported");
-		}
-	} else {
-	    vpbe_dev->amp = NULL;
-	}
-
-	/* set the current encoder and output to that of venc by default */
-	vpbe_dev->current_sd_index = 0;
-	vpbe_dev->current_out_index = 0;
-
-	mutex_unlock(&vpbe_dev->lock);
-
-	printk(KERN_NOTICE "Setting default output to %s\n", def_output);
-	ret = vpbe_set_default_output(vpbe_dev);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s",
-			 def_output);
-		goto fail_kfree_amp;
-	}
-
-	printk(KERN_NOTICE "Setting default mode to %s\n", def_mode);
-	ret = vpbe_set_default_mode(vpbe_dev);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s",
-			 def_mode);
-		goto fail_kfree_amp;
-	}
-	vpbe_dev->initialized = 1;
-	/* TBD handling of bootargs for default output and mode */
-	return 0;
-
-fail_kfree_amp:
-	mutex_lock(&vpbe_dev->lock);
-	kfree(vpbe_dev->amp);
-fail_kfree_encoders:
-	kfree(vpbe_dev->encoders);
-fail_dev_unregister:
-	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
-fail_clk_put:
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
-		clk_disable_unprepare(vpbe_dev->dac_clk);
-		clk_put(vpbe_dev->dac_clk);
-	}
-fail_mutex_unlock:
-	mutex_unlock(&vpbe_dev->lock);
-	return ret;
-}
-
-/**
- * vpbe_deinitialize() - de-initialize the vpbe display controller
- * @dev: Master and slave device ptr
- * @vpbe_dev: vpbe device ptr
- *
- * vpbe_master and slave frame buffer devices calls this to de-initialize
- * the display controller. It is called when master and slave device
- * driver modules are removed and no longer requires the display controller.
- */
-static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev)
-{
-	v4l2_device_unregister(&vpbe_dev->v4l2_dev);
-	if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) {
-		clk_disable_unprepare(vpbe_dev->dac_clk);
-		clk_put(vpbe_dev->dac_clk);
-	}
-
-	kfree(vpbe_dev->amp);
-	kfree(vpbe_dev->encoders);
-	vpbe_dev->initialized = 0;
-	/* disable vpss clocks */
-	vpss_enable_clock(VPSS_VPBE_CLOCK, 0);
-}
-
-static const struct vpbe_device_ops vpbe_dev_ops = {
-	.enum_outputs = vpbe_enum_outputs,
-	.set_output = vpbe_set_output,
-	.get_output = vpbe_get_output,
-	.s_dv_timings = vpbe_s_dv_timings,
-	.g_dv_timings = vpbe_g_dv_timings,
-	.enum_dv_timings = vpbe_enum_dv_timings,
-	.s_std = vpbe_s_std,
-	.g_std = vpbe_g_std,
-	.initialize = vpbe_initialize,
-	.deinitialize = vpbe_deinitialize,
-	.get_mode_info = vpbe_get_current_mode_info,
-	.set_mode = vpbe_set_mode,
-};
-
-static int vpbe_probe(struct platform_device *pdev)
-{
-	struct vpbe_device *vpbe_dev;
-	struct vpbe_config *cfg;
-
-	if (!pdev->dev.platform_data) {
-		v4l2_err(pdev->dev.driver, "No platform data\n");
-		return -ENODEV;
-	}
-	cfg = pdev->dev.platform_data;
-
-	if (!cfg->module_name[0] ||
-	    !cfg->osd.module_name[0] ||
-	    !cfg->venc.module_name[0]) {
-		v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n");
-		return -EINVAL;
-	}
-
-	vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL);
-	if (!vpbe_dev)
-		return -ENOMEM;
-
-	vpbe_dev->cfg = cfg;
-	vpbe_dev->ops = vpbe_dev_ops;
-	vpbe_dev->pdev = &pdev->dev;
-
-	if (cfg->outputs->num_modes > 0)
-		vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0];
-	else {
-		kfree(vpbe_dev);
-		return -ENODEV;
-	}
-
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, vpbe_dev);
-	mutex_init(&vpbe_dev->lock);
-
-	return 0;
-}
-
-static int vpbe_remove(struct platform_device *device)
-{
-	struct vpbe_device *vpbe_dev = platform_get_drvdata(device);
-
-	kfree(vpbe_dev);
-
-	return 0;
-}
-
-static struct platform_driver vpbe_driver = {
-	.driver	= {
-		.name	= "vpbe_controller",
-	},
-	.probe = vpbe_probe,
-	.remove = vpbe_remove,
-};
-
-module_platform_driver(vpbe_driver);
diff --git a/drivers/media/platform/ti/davinci/vpbe_display.c b/drivers/media/platform/ti/davinci/vpbe_display.c
deleted file mode 100644
index 9ea70817538e..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe_display.c
+++ /dev/null
@@ -1,1510 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/wait.h>
-#include <linux/time.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mm.h>
-#include <linux/mutex.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-
-
-#include <media/v4l2-dev.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_display.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe_osd.h>
-#include "vpbe_venc_regs.h"
-
-#define VPBE_DISPLAY_DRIVER "vpbe-v4l2"
-
-static int debug;
-
-#define VPBE_DEFAULT_NUM_BUFS 3
-
-module_param(debug, int, 0644);
-
-static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer);
-
-static int venc_is_second_field(struct vpbe_display *disp_dev)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int ret, val;
-
-	ret = v4l2_subdev_call(vpbe_dev->venc,
-			       core,
-			       command,
-			       VENC_GET_FLD,
-			       &val);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			 "Error in getting Field ID 0\n");
-		return 1;
-	}
-	return val;
-}
-
-static void vpbe_isr_even_field(struct vpbe_display *disp_obj,
-				struct vpbe_layer *layer)
-{
-	if (layer->cur_frm == layer->next_frm)
-		return;
-
-	layer->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns();
-	vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE);
-	/* Make cur_frm pointing to next_frm */
-	layer->cur_frm = layer->next_frm;
-}
-
-static void vpbe_isr_odd_field(struct vpbe_display *disp_obj,
-				struct vpbe_layer *layer)
-{
-	struct osd_state *osd_device = disp_obj->osd_device;
-	unsigned long addr;
-
-	spin_lock(&disp_obj->dma_queue_lock);
-	if (list_empty(&layer->dma_queue) ||
-		(layer->cur_frm != layer->next_frm)) {
-		spin_unlock(&disp_obj->dma_queue_lock);
-		return;
-	}
-	/*
-	 * one field is displayed configure
-	 * the next frame if it is available
-	 * otherwise hold on current frame
-	 * Get next from the buffer queue
-	 */
-	layer->next_frm = list_entry(layer->dma_queue.next,
-			  struct  vpbe_disp_buffer, list);
-	/* Remove that from the buffer queue */
-	list_del(&layer->next_frm->list);
-	spin_unlock(&disp_obj->dma_queue_lock);
-	/* Mark state of the frame to active */
-	layer->next_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE;
-	addr = vb2_dma_contig_plane_dma_addr(&layer->next_frm->vb.vb2_buf, 0);
-	osd_device->ops.start_layer(osd_device,
-			layer->layer_info.id,
-			addr,
-			disp_obj->cbcr_ofst);
-}
-
-/* interrupt service routine */
-static irqreturn_t venc_isr(int irq, void *arg)
-{
-	struct vpbe_display *disp_dev = (struct vpbe_display *)arg;
-	struct vpbe_layer *layer;
-	static unsigned last_event;
-	unsigned event = 0;
-	int fid;
-	int i;
-
-	if (!arg || !disp_dev->dev[0])
-		return IRQ_HANDLED;
-
-	if (venc_is_second_field(disp_dev))
-		event |= VENC_SECOND_FIELD;
-	else
-		event |= VENC_FIRST_FIELD;
-
-	if (event == (last_event & ~VENC_END_OF_FRAME)) {
-		/*
-		* If the display is non-interlaced, then we need to flag the
-		* end-of-frame event at every interrupt regardless of the
-		* value of the FIDST bit.  We can conclude that the display is
-		* non-interlaced if the value of the FIDST bit is unchanged
-		* from the previous interrupt.
-		*/
-		event |= VENC_END_OF_FRAME;
-	} else if (event == VENC_SECOND_FIELD) {
-		/* end-of-frame for interlaced display */
-		event |= VENC_END_OF_FRAME;
-	}
-	last_event = event;
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		layer = disp_dev->dev[i];
-
-		if (!vb2_start_streaming_called(&layer->buffer_queue))
-			continue;
-
-		if (layer->layer_first_int) {
-			layer->layer_first_int = 0;
-			continue;
-		}
-		/* Check the field format */
-		if ((V4L2_FIELD_NONE == layer->pix_fmt.field) &&
-			(event & VENC_END_OF_FRAME)) {
-			/* Progressive mode */
-
-			vpbe_isr_even_field(disp_dev, layer);
-			vpbe_isr_odd_field(disp_dev, layer);
-		} else {
-		/* Interlaced mode */
-
-			layer->field_id ^= 1;
-			if (event & VENC_FIRST_FIELD)
-				fid = 0;
-			else
-				fid = 1;
-
-			/*
-			* If field id does not match with store
-			* field id
-			*/
-			if (fid != layer->field_id) {
-				/* Make them in sync */
-				layer->field_id = fid;
-				continue;
-			}
-			/*
-			* device field id and local field id are
-			* in sync. If this is even field
-			*/
-			if (0 == fid)
-				vpbe_isr_even_field(disp_dev, layer);
-			else  /* odd field */
-				vpbe_isr_odd_field(disp_dev, layer);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-/*
- * vpbe_buffer_prepare()
- * This is the callback function called from vb2_qbuf() function
- * the buffer is prepared and user space virtual address is converted into
- * physical address
- */
-static int vpbe_buffer_prepare(struct vb2_buffer *vb)
-{
-	struct vb2_queue *q = vb->vb2_queue;
-	struct vpbe_layer *layer = vb2_get_drv_priv(q);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	unsigned long addr;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-				"vpbe_buffer_prepare\n");
-
-	vb2_set_plane_payload(vb, 0, layer->pix_fmt.sizeimage);
-	if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0))
-		return -EINVAL;
-
-	addr = vb2_dma_contig_plane_dma_addr(vb, 0);
-	if (!IS_ALIGNED(addr, 8)) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			 "buffer_prepare:offset is not aligned to 32 bytes\n");
-		return -EINVAL;
-	}
-	return 0;
-}
-
-/*
- * vpbe_buffer_setup()
- * This function allocates memory for the buffers
- */
-static int
-vpbe_buffer_queue_setup(struct vb2_queue *vq,
-			unsigned int *nbuffers, unsigned int *nplanes,
-			unsigned int sizes[], struct device *alloc_devs[])
-
-{
-	/* Get the file handle object and layer object */
-	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n");
-
-	/* Store number of buffers allocated in numbuffer member */
-	if (vq->num_buffers + *nbuffers < VPBE_DEFAULT_NUM_BUFS)
-		*nbuffers = VPBE_DEFAULT_NUM_BUFS - vq->num_buffers;
-
-	if (*nplanes)
-		return sizes[0] < layer->pix_fmt.sizeimage ? -EINVAL : 0;
-
-	*nplanes = 1;
-	sizes[0] = layer->pix_fmt.sizeimage;
-
-	return 0;
-}
-
-/*
- * vpbe_buffer_queue()
- * This function adds the buffer to DMA queue
- */
-static void vpbe_buffer_queue(struct vb2_buffer *vb)
-{
-	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
-	/* Get the file handle object and layer object */
-	struct vpbe_disp_buffer *buf = container_of(vbuf,
-				struct vpbe_disp_buffer, vb);
-	struct vpbe_layer *layer = vb2_get_drv_priv(vb->vb2_queue);
-	struct vpbe_display *disp = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	unsigned long flags;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe_buffer_queue\n");
-
-	/* add the buffer to the DMA queue */
-	spin_lock_irqsave(&disp->dma_queue_lock, flags);
-	list_add_tail(&buf->list, &layer->dma_queue);
-	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
-}
-
-static int vpbe_start_streaming(struct vb2_queue *vq, unsigned int count)
-{
-	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
-	struct osd_state *osd_device = layer->disp_dev->osd_device;
-	int ret;
-
-	osd_device->ops.disable_layer(osd_device, layer->layer_info.id);
-
-	/* Get the next frame from the buffer queue */
-	layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
-				struct vpbe_disp_buffer, list);
-	/* Remove buffer from the buffer queue */
-	list_del(&layer->cur_frm->list);
-	/* Mark state of the current frame to active */
-	layer->cur_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE;
-	/* Initialize field_id and started member */
-	layer->field_id = 0;
-
-	/* Set parameters in OSD and VENC */
-	ret = vpbe_set_osd_display_params(layer->disp_dev, layer);
-	if (ret < 0) {
-		struct vpbe_disp_buffer *buf, *tmp;
-
-		vb2_buffer_done(&layer->cur_frm->vb.vb2_buf,
-				VB2_BUF_STATE_QUEUED);
-		list_for_each_entry_safe(buf, tmp, &layer->dma_queue, list) {
-			list_del(&buf->list);
-			vb2_buffer_done(&buf->vb.vb2_buf,
-					VB2_BUF_STATE_QUEUED);
-		}
-
-		return ret;
-	}
-
-	/*
-	 * if request format is yuv420 semiplanar, need to
-	 * enable both video windows
-	 */
-	layer->layer_first_int = 1;
-
-	return ret;
-}
-
-static void vpbe_stop_streaming(struct vb2_queue *vq)
-{
-	struct vpbe_layer *layer = vb2_get_drv_priv(vq);
-	struct osd_state *osd_device = layer->disp_dev->osd_device;
-	struct vpbe_display *disp = layer->disp_dev;
-	unsigned long flags;
-
-	if (!vb2_is_streaming(vq))
-		return;
-
-	osd_device->ops.disable_layer(osd_device, layer->layer_info.id);
-
-	/* release all active buffers */
-	spin_lock_irqsave(&disp->dma_queue_lock, flags);
-	if (layer->cur_frm == layer->next_frm) {
-		vb2_buffer_done(&layer->cur_frm->vb.vb2_buf,
-				VB2_BUF_STATE_ERROR);
-	} else {
-		if (layer->cur_frm)
-			vb2_buffer_done(&layer->cur_frm->vb.vb2_buf,
-					VB2_BUF_STATE_ERROR);
-		if (layer->next_frm)
-			vb2_buffer_done(&layer->next_frm->vb.vb2_buf,
-					VB2_BUF_STATE_ERROR);
-	}
-
-	while (!list_empty(&layer->dma_queue)) {
-		layer->next_frm = list_entry(layer->dma_queue.next,
-						struct vpbe_disp_buffer, list);
-		list_del(&layer->next_frm->list);
-		vb2_buffer_done(&layer->next_frm->vb.vb2_buf,
-				VB2_BUF_STATE_ERROR);
-	}
-	spin_unlock_irqrestore(&disp->dma_queue_lock, flags);
-}
-
-static const struct vb2_ops video_qops = {
-	.queue_setup = vpbe_buffer_queue_setup,
-	.wait_prepare = vb2_ops_wait_prepare,
-	.wait_finish = vb2_ops_wait_finish,
-	.buf_prepare = vpbe_buffer_prepare,
-	.start_streaming = vpbe_start_streaming,
-	.stop_streaming = vpbe_stop_streaming,
-	.buf_queue = vpbe_buffer_queue,
-};
-
-static
-struct vpbe_layer*
-_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer)
-{
-	enum vpbe_display_device_id thiswin, otherwin;
-	thiswin = layer->device_id;
-
-	otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ?
-	VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0;
-	return disp_dev->dev[otherwin];
-}
-
-static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer)
-{
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	unsigned long addr;
-	int ret;
-
-	addr = vb2_dma_contig_plane_dma_addr(&layer->cur_frm->vb.vb2_buf, 0);
-	/* Set address in the display registers */
-	osd_device->ops.start_layer(osd_device,
-				    layer->layer_info.id,
-				    addr,
-				    disp_dev->cbcr_ofst);
-
-	ret = osd_device->ops.enable_layer(osd_device,
-				layer->layer_info.id, 0);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Error in enabling osd window layer 0\n");
-		return -1;
-	}
-
-	/* Enable the window */
-	layer->layer_info.enable = 1;
-	if (cfg->pixfmt == PIXFMT_NV12) {
-		struct vpbe_layer *otherlayer =
-			_vpbe_display_get_other_win_layer(disp_dev, layer);
-
-		ret = osd_device->ops.enable_layer(osd_device,
-				otherlayer->layer_info.id, 1);
-		if (ret < 0) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				"Error in enabling osd window layer 1\n");
-			return -1;
-		}
-		otherlayer->layer_info.enable = 1;
-	}
-	return 0;
-}
-
-static void
-vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer,
-			int expected_xsize, int expected_ysize)
-{
-	struct display_layer_info *layer_info = &layer->layer_info;
-	struct v4l2_pix_format *pixfmt = &layer->pix_fmt;
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int calculated_xsize;
-	int h_exp = 0;
-	int v_exp = 0;
-	int h_scale;
-	int v_scale;
-
-	v4l2_std_id standard_id = vpbe_dev->current_timings.std_id;
-
-	/*
-	 * Application initially set the image format. Current display
-	 * size is obtained from the vpbe display controller. expected_xsize
-	 * and expected_ysize are set through S_SELECTION ioctl. Based on this,
-	 * driver will calculate the scale factors for vertical and
-	 * horizontal direction so that the image is displayed scaled
-	 * and expanded. Application uses expansion to display the image
-	 * in a square pixel. Otherwise it is displayed using displays
-	 * pixel aspect ratio.It is expected that application chooses
-	 * the crop coordinates for cropped or scaled display. if crop
-	 * size is less than the image size, it is displayed cropped or
-	 * it is displayed scaled and/or expanded.
-	 *
-	 * to begin with, set the crop window same as expected. Later we
-	 * will override with scaled window size
-	 */
-
-	cfg->xsize = pixfmt->width;
-	cfg->ysize = pixfmt->height;
-	layer_info->h_zoom = ZOOM_X1;	/* no horizontal zoom */
-	layer_info->v_zoom = ZOOM_X1;	/* no horizontal zoom */
-	layer_info->h_exp = H_EXP_OFF;	/* no horizontal zoom */
-	layer_info->v_exp = V_EXP_OFF;	/* no horizontal zoom */
-
-	if (pixfmt->width < expected_xsize) {
-		h_scale = vpbe_dev->current_timings.xres / pixfmt->width;
-		if (h_scale < 2)
-			h_scale = 1;
-		else if (h_scale >= 4)
-			h_scale = 4;
-		else
-			h_scale = 2;
-		cfg->xsize *= h_scale;
-		if (cfg->xsize < expected_xsize) {
-			if ((standard_id & V4L2_STD_525_60) ||
-			(standard_id & V4L2_STD_625_50)) {
-				calculated_xsize = (cfg->xsize *
-					VPBE_DISPLAY_H_EXP_RATIO_N) /
-					VPBE_DISPLAY_H_EXP_RATIO_D;
-				if (calculated_xsize <= expected_xsize) {
-					h_exp = 1;
-					cfg->xsize = calculated_xsize;
-				}
-			}
-		}
-		if (h_scale == 2)
-			layer_info->h_zoom = ZOOM_X2;
-		else if (h_scale == 4)
-			layer_info->h_zoom = ZOOM_X4;
-		if (h_exp)
-			layer_info->h_exp = H_EXP_9_OVER_8;
-	} else {
-		/* no scaling, only cropping. Set display area to crop area */
-		cfg->xsize = expected_xsize;
-	}
-
-	if (pixfmt->height < expected_ysize) {
-		v_scale = expected_ysize / pixfmt->height;
-		if (v_scale < 2)
-			v_scale = 1;
-		else if (v_scale >= 4)
-			v_scale = 4;
-		else
-			v_scale = 2;
-		cfg->ysize *= v_scale;
-		if (cfg->ysize < expected_ysize) {
-			if ((standard_id & V4L2_STD_625_50)) {
-				calculated_xsize = (cfg->ysize *
-					VPBE_DISPLAY_V_EXP_RATIO_N) /
-					VPBE_DISPLAY_V_EXP_RATIO_D;
-				if (calculated_xsize <= expected_ysize) {
-					v_exp = 1;
-					cfg->ysize = calculated_xsize;
-				}
-			}
-		}
-		if (v_scale == 2)
-			layer_info->v_zoom = ZOOM_X2;
-		else if (v_scale == 4)
-			layer_info->v_zoom = ZOOM_X4;
-		if (v_exp)
-			layer_info->v_exp = V_EXP_6_OVER_5;
-	} else {
-		/* no scaling, only cropping. Set display area to crop area */
-		cfg->ysize = expected_ysize;
-	}
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"crop display xsize = %d, ysize = %d\n",
-		cfg->xsize, cfg->ysize);
-}
-
-static void vpbe_disp_adj_position(struct vpbe_display *disp_dev,
-			struct vpbe_layer *layer,
-			int top, int left)
-{
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-
-	cfg->xpos = min((unsigned int)left,
-			vpbe_dev->current_timings.xres - cfg->xsize);
-	cfg->ypos = min((unsigned int)top,
-			vpbe_dev->current_timings.yres - cfg->ysize);
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"new xpos = %d, ypos = %d\n",
-		cfg->xpos, cfg->ypos);
-}
-
-static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev,
-			struct v4l2_rect *c)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-
-	if ((c->width == 0) ||
-	  ((c->width + c->left) > vpbe_dev->current_timings.xres))
-		c->width = vpbe_dev->current_timings.xres - c->left;
-
-	if ((c->height == 0) || ((c->height + c->top) >
-	  vpbe_dev->current_timings.yres))
-		c->height = vpbe_dev->current_timings.yres - c->top;
-
-	/* window height must be even for interlaced display */
-	if (vpbe_dev->current_timings.interlaced)
-		c->height &= (~0x01);
-
-}
-
-/*
- * vpbe_try_format()
- * If user application provides width and height, and have bytesperline set
- * to zero, driver calculates bytesperline and sizeimage based on hardware
- * limits.
- */
-static int vpbe_try_format(struct vpbe_display *disp_dev,
-			struct v4l2_pix_format *pixfmt, int check)
-{
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int min_height = 1;
-	int min_width = 32;
-	int max_height;
-	int max_width;
-	int bpp;
-
-	if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) &&
-	    (pixfmt->pixelformat != V4L2_PIX_FMT_NV12))
-		/* choose default as V4L2_PIX_FMT_UYVY */
-		pixfmt->pixelformat = V4L2_PIX_FMT_UYVY;
-
-	/* Check the field format */
-	if ((pixfmt->field != V4L2_FIELD_INTERLACED) &&
-		(pixfmt->field != V4L2_FIELD_NONE)) {
-		if (vpbe_dev->current_timings.interlaced)
-			pixfmt->field = V4L2_FIELD_INTERLACED;
-		else
-			pixfmt->field = V4L2_FIELD_NONE;
-	}
-
-	if (pixfmt->field == V4L2_FIELD_INTERLACED)
-		min_height = 2;
-
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		bpp = 1;
-	else
-		bpp = 2;
-
-	max_width = vpbe_dev->current_timings.xres;
-	max_height = vpbe_dev->current_timings.yres;
-
-	min_width /= bpp;
-
-	if (!pixfmt->width || (pixfmt->width < min_width) ||
-		(pixfmt->width > max_width)) {
-		pixfmt->width = vpbe_dev->current_timings.xres;
-	}
-
-	if (!pixfmt->height || (pixfmt->height  < min_height) ||
-		(pixfmt->height  > max_height)) {
-		pixfmt->height = vpbe_dev->current_timings.yres;
-	}
-
-	if (pixfmt->bytesperline < (pixfmt->width * bpp))
-		pixfmt->bytesperline = pixfmt->width * bpp;
-
-	/* Make the bytesperline 32 byte aligned */
-	pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31);
-
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12)
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height +
-				(pixfmt->bytesperline * pixfmt->height >> 1);
-	else
-		pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
-
-	return 0;
-}
-
-static int vpbe_display_querycap(struct file *file, void  *priv,
-			       struct v4l2_capability *cap)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	snprintf(cap->driver, sizeof(cap->driver), "%s",
-		dev_name(vpbe_dev->pdev));
-	strscpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card));
-
-	return 0;
-}
-
-static int vpbe_display_s_selection(struct file *file, void *priv,
-			     struct v4l2_selection *sel)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	struct v4l2_rect rect = sel->r;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-		"VIDIOC_S_SELECTION, layer id = %d\n", layer->device_id);
-
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT ||
-	    sel->target != V4L2_SEL_TGT_CROP)
-		return -EINVAL;
-
-	if (rect.top < 0)
-		rect.top = 0;
-	if (rect.left < 0)
-		rect.left = 0;
-
-	vpbe_disp_check_window_params(disp_dev, &rect);
-
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-
-	vpbe_disp_calculate_scale_factor(disp_dev, layer,
-					rect.width,
-					rect.height);
-	vpbe_disp_adj_position(disp_dev, layer, rect.top,
-					rect.left);
-	ret = osd_device->ops.set_layer_config(osd_device,
-				layer->layer_info.id, cfg);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Error in set layer config:\n");
-		return -EINVAL;
-	}
-
-	/* apply zooming and h or v expansion */
-	osd_device->ops.set_zoom(osd_device,
-			layer->layer_info.id,
-			layer->layer_info.h_zoom,
-			layer->layer_info.v_zoom);
-	ret = osd_device->ops.set_vid_expansion(osd_device,
-			layer->layer_info.h_exp,
-			layer->layer_info.v_exp);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-		"Error in set vid expansion:\n");
-		return -EINVAL;
-	}
-
-	if ((layer->layer_info.h_zoom != ZOOM_X1) ||
-		(layer->layer_info.v_zoom != ZOOM_X1) ||
-		(layer->layer_info.h_exp != H_EXP_OFF) ||
-		(layer->layer_info.v_exp != V_EXP_OFF))
-		/* Enable expansion filter */
-		osd_device->ops.set_interpolation_filter(osd_device, 1);
-	else
-		osd_device->ops.set_interpolation_filter(osd_device, 0);
-
-	sel->r = rect;
-	return 0;
-}
-
-static int vpbe_display_g_selection(struct file *file, void *priv,
-				    struct v4l2_selection *sel)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct osd_layer_config *cfg = &layer->layer_info.config;
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	struct osd_state *osd_device = layer->disp_dev->osd_device;
-	struct v4l2_rect *rect = &sel->r;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_G_SELECTION, layer id = %d\n",
-			layer->device_id);
-
-	if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	switch (sel->target) {
-	case V4L2_SEL_TGT_CROP:
-		osd_device->ops.get_layer_config(osd_device,
-						 layer->layer_info.id, cfg);
-		rect->top = cfg->ypos;
-		rect->left = cfg->xpos;
-		rect->width = cfg->xsize;
-		rect->height = cfg->ysize;
-		break;
-	case V4L2_SEL_TGT_CROP_DEFAULT:
-	case V4L2_SEL_TGT_CROP_BOUNDS:
-		rect->left = 0;
-		rect->top = 0;
-		rect->width = vpbe_dev->current_timings.xres;
-		rect->height = vpbe_dev->current_timings.yres;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static int vpbe_display_g_pixelaspect(struct file *file, void *priv,
-				      int type, struct v4l2_fract *f)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n");
-
-	if (type != V4L2_BUF_TYPE_VIDEO_OUTPUT)
-		return -EINVAL;
-
-	*f = vpbe_dev->current_timings.aspect;
-	return 0;
-}
-
-static int vpbe_display_g_fmt(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_G_FMT, layer id = %d\n",
-			layer->device_id);
-
-	/* If buffer type is video output */
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-	/* Fill in the information about format */
-	fmt->fmt.pix = layer->pix_fmt;
-
-	return 0;
-}
-
-static int vpbe_display_enum_fmt(struct file *file, void  *priv,
-				   struct v4l2_fmtdesc *fmt)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-				"VIDIOC_ENUM_FMT, layer id = %d\n",
-				layer->device_id);
-	if (fmt->index > 1) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n");
-		return -EINVAL;
-	}
-
-	/* Fill in the information about format */
-	if (fmt->index == 0)
-		fmt->pixelformat = V4L2_PIX_FMT_UYVY;
-	else
-		fmt->pixelformat = V4L2_PIX_FMT_NV12;
-
-	return 0;
-}
-
-static int vpbe_display_s_fmt(struct file *file, void *priv,
-				struct v4l2_format *fmt)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"VIDIOC_S_FMT, layer id = %d\n",
-			layer->device_id);
-
-	if (vb2_is_busy(&layer->buffer_queue))
-		return -EBUSY;
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-	/* Check for valid pixel format */
-	ret = vpbe_try_format(disp_dev, pixfmt, 1);
-	if (ret)
-		return ret;
-
-	/* YUV420 is requested, check availability of the
-	other video window */
-
-	layer->pix_fmt = *pixfmt;
-	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) {
-		struct vpbe_layer *otherlayer;
-
-		otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
-		/* if other layer is available, only
-		 * claim it, do not configure it
-		 */
-		ret = osd_device->ops.request_layer(osd_device,
-						    otherlayer->layer_info.id);
-		if (ret < 0) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				 "Display Manager failed to allocate layer\n");
-			return -EBUSY;
-		}
-	}
-
-	/* Get osd layer config */
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-	/* Store the pixel format in the layer object */
-	cfg->xsize = pixfmt->width;
-	cfg->ysize = pixfmt->height;
-	cfg->line_length = pixfmt->bytesperline;
-	cfg->ypos = 0;
-	cfg->xpos = 0;
-	cfg->interlaced = vpbe_dev->current_timings.interlaced;
-
-	if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat)
-		cfg->pixfmt = PIXFMT_YCBCRI;
-
-	/* Change of the default pixel format for both video windows */
-	if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) {
-		struct vpbe_layer *otherlayer;
-		cfg->pixfmt = PIXFMT_NV12;
-		otherlayer = _vpbe_display_get_other_win_layer(disp_dev,
-								layer);
-		otherlayer->layer_info.config.pixfmt = PIXFMT_NV12;
-	}
-
-	/* Set the layer config in the osd window */
-	ret = osd_device->ops.set_layer_config(osd_device,
-				layer->layer_info.id, cfg);
-	if (ret < 0) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-				"Error in S_FMT params:\n");
-		return -EINVAL;
-	}
-
-	/* Readback and fill the local copy of current pix format */
-	osd_device->ops.get_layer_config(osd_device,
-			layer->layer_info.id, cfg);
-
-	return 0;
-}
-
-static int vpbe_display_try_fmt(struct file *file, void *priv,
-				  struct v4l2_format *fmt)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	struct v4l2_pix_format *pixfmt = &fmt->fmt.pix;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n");
-
-	if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n");
-		return -EINVAL;
-	}
-
-	/* Check for valid field format */
-	return  vpbe_try_format(disp_dev, pixfmt, 0);
-
-}
-
-/*
- * vpbe_display_s_std - Set the given standard in the encoder
- *
- * Sets the standard if supported by the current encoder. Return the status.
- * 0 - success & -EINVAL on error
- */
-static int vpbe_display_s_std(struct file *file, void *priv,
-				v4l2_std_id std_id)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n");
-
-	if (vb2_is_busy(&layer->buffer_queue))
-		return -EBUSY;
-
-	if (vpbe_dev->ops.s_std) {
-		ret = vpbe_dev->ops.s_std(vpbe_dev, std_id);
-		if (ret) {
-			v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set standard for sub devices\n");
-			return -EINVAL;
-		}
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_g_std - Get the standard in the current encoder
- *
- * Get the standard in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int vpbe_display_g_std(struct file *file, void *priv,
-				v4l2_std_id *std_id)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_G_STD\n");
-
-	/* Get the standard from the current encoder */
-	if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) {
-		*std_id = vpbe_dev->current_timings.std_id;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-/*
- * vpbe_display_enum_output - enumerate outputs
- *
- * Enumerates the outputs available at the vpbe display
- * returns the status, -EINVAL if end of output list
- */
-static int vpbe_display_enum_output(struct file *file, void *priv,
-				    struct v4l2_output *output)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_ENUM_OUTPUT\n");
-
-	/* Enumerate outputs */
-	if (!vpbe_dev->ops.enum_outputs)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output);
-	if (ret) {
-		v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"Failed to enumerate outputs\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_s_output - Set output to
- * the output specified by the index
- */
-static int vpbe_display_s_output(struct file *file, void *priv,
-				unsigned int i)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,	"VIDIOC_S_OUTPUT\n");
-
-	if (vb2_is_busy(&layer->buffer_queue))
-		return -EBUSY;
-
-	if (!vpbe_dev->ops.set_output)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.set_output(vpbe_dev, i);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set output for sub devices\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_g_output - Get output from subdevice
- * for a given by the index
- */
-static int vpbe_display_g_output(struct file *file, void *priv,
-				unsigned int *i)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n");
-	/* Get the standard from the current encoder */
-	*i = vpbe_dev->current_out_index;
-
-	return 0;
-}
-
-/*
- * vpbe_display_enum_dv_timings - Enumerate the dv timings
- *
- * enum the timings in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_enum_dv_timings(struct file *file, void *priv,
-			struct v4l2_enum_dv_timings *timings)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_TIMINGS\n");
-
-	/* Enumerate outputs */
-	if (!vpbe_dev->ops.enum_dv_timings)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.enum_dv_timings(vpbe_dev, timings);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to enumerate dv timings info\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_s_dv_timings - Set the dv timings
- *
- * Set the timings in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_s_dv_timings(struct file *file, void *priv,
-				struct v4l2_dv_timings *timings)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-	int ret;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_TIMINGS\n");
-
-	if (vb2_is_busy(&layer->buffer_queue))
-		return -EBUSY;
-
-	/* Set the given standard in the encoder */
-	if (!vpbe_dev->ops.s_dv_timings)
-		return -EINVAL;
-
-	ret = vpbe_dev->ops.s_dv_timings(vpbe_dev, timings);
-	if (ret) {
-		v4l2_err(&vpbe_dev->v4l2_dev,
-			"Failed to set the dv timings info\n");
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_g_dv_timings - Set the dv timings
- *
- * Get the timings in the current encoder. Return the status. 0 - success
- * -EINVAL on error
- */
-static int
-vpbe_display_g_dv_timings(struct file *file, void *priv,
-				struct v4l2_dv_timings *dv_timings)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_TIMINGS\n");
-
-	/* Get the given standard in the encoder */
-
-	if (vpbe_dev->current_timings.timings_type &
-				VPBE_ENC_DV_TIMINGS) {
-		*dv_timings = vpbe_dev->current_timings.dv_timings;
-	} else {
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-/*
- * vpbe_display_open()
- * It creates object of file handle structure and stores it in private_data
- * member of filepointer
- */
-static int vpbe_display_open(struct file *file)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_state *osd_device = disp_dev->osd_device;
-	int err;
-
-	/* creating context for file descriptor */
-	err = v4l2_fh_open(file);
-	if (err) {
-		v4l2_err(&vpbe_dev->v4l2_dev, "v4l2_fh_open failed\n");
-		return err;
-	}
-
-	/* leaving if layer is already initialized */
-	if (!v4l2_fh_is_singular_file(file))
-		return err;
-
-	if (!layer->usrs) {
-		if (mutex_lock_interruptible(&layer->opslock))
-			return -ERESTARTSYS;
-		/* First claim the layer for this device */
-		err = osd_device->ops.request_layer(osd_device,
-						layer->layer_info.id);
-		mutex_unlock(&layer->opslock);
-		if (err < 0) {
-			/* Couldn't get layer */
-			v4l2_err(&vpbe_dev->v4l2_dev,
-				"Display Manager failed to allocate layer\n");
-			v4l2_fh_release(file);
-			return -EINVAL;
-		}
-	}
-	/* Increment layer usrs counter */
-	layer->usrs++;
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev,
-			"vpbe display device opened successfully\n");
-	return 0;
-}
-
-/*
- * vpbe_display_release()
- * This function deletes buffer queue, frees the buffers and the davinci
- * display file * handle
- */
-static int vpbe_display_release(struct file *file)
-{
-	struct vpbe_layer *layer = video_drvdata(file);
-	struct osd_layer_config *cfg  = &layer->layer_info.config;
-	struct vpbe_display *disp_dev = layer->disp_dev;
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	struct osd_state *osd_device = disp_dev->osd_device;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n");
-
-	mutex_lock(&layer->opslock);
-
-	osd_device->ops.disable_layer(osd_device,
-			layer->layer_info.id);
-	/* Decrement layer usrs counter */
-	layer->usrs--;
-	/* If this file handle has initialize encoder device, reset it */
-	if (!layer->usrs) {
-		if (cfg->pixfmt == PIXFMT_NV12) {
-			struct vpbe_layer *otherlayer;
-			otherlayer =
-			_vpbe_display_get_other_win_layer(disp_dev, layer);
-			osd_device->ops.disable_layer(osd_device,
-					otherlayer->layer_info.id);
-			osd_device->ops.release_layer(osd_device,
-					otherlayer->layer_info.id);
-		}
-		osd_device->ops.disable_layer(osd_device,
-				layer->layer_info.id);
-		osd_device->ops.release_layer(osd_device,
-				layer->layer_info.id);
-	}
-
-	_vb2_fop_release(file, NULL);
-	mutex_unlock(&layer->opslock);
-
-	disp_dev->cbcr_ofst = 0;
-
-	return 0;
-}
-
-/* vpbe capture ioctl operations */
-static const struct v4l2_ioctl_ops vpbe_ioctl_ops = {
-	.vidioc_querycap	 = vpbe_display_querycap,
-	.vidioc_g_fmt_vid_out    = vpbe_display_g_fmt,
-	.vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt,
-	.vidioc_s_fmt_vid_out    = vpbe_display_s_fmt,
-	.vidioc_try_fmt_vid_out  = vpbe_display_try_fmt,
-
-	.vidioc_reqbufs		 = vb2_ioctl_reqbufs,
-	.vidioc_create_bufs	 = vb2_ioctl_create_bufs,
-	.vidioc_querybuf	 = vb2_ioctl_querybuf,
-	.vidioc_qbuf		 = vb2_ioctl_qbuf,
-	.vidioc_dqbuf		 = vb2_ioctl_dqbuf,
-	.vidioc_streamon	 = vb2_ioctl_streamon,
-	.vidioc_streamoff	 = vb2_ioctl_streamoff,
-	.vidioc_expbuf		 = vb2_ioctl_expbuf,
-
-	.vidioc_g_pixelaspect	 = vpbe_display_g_pixelaspect,
-	.vidioc_g_selection	 = vpbe_display_g_selection,
-	.vidioc_s_selection	 = vpbe_display_s_selection,
-
-	.vidioc_s_std		 = vpbe_display_s_std,
-	.vidioc_g_std		 = vpbe_display_g_std,
-
-	.vidioc_enum_output	 = vpbe_display_enum_output,
-	.vidioc_s_output	 = vpbe_display_s_output,
-	.vidioc_g_output	 = vpbe_display_g_output,
-
-	.vidioc_s_dv_timings	 = vpbe_display_s_dv_timings,
-	.vidioc_g_dv_timings	 = vpbe_display_g_dv_timings,
-	.vidioc_enum_dv_timings	 = vpbe_display_enum_dv_timings,
-};
-
-static const struct v4l2_file_operations vpbe_fops = {
-	.owner = THIS_MODULE,
-	.open = vpbe_display_open,
-	.release = vpbe_display_release,
-	.unlocked_ioctl = video_ioctl2,
-	.mmap = vb2_fop_mmap,
-	.poll =  vb2_fop_poll,
-};
-
-static int vpbe_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct vpbe_display *vpbe_disp  = data;
-
-	if (strcmp("vpbe_controller", pdev->name) == 0)
-		vpbe_disp->vpbe_dev = platform_get_drvdata(pdev);
-
-	if (strstr(pdev->name, "vpbe-osd"))
-		vpbe_disp->osd_device = platform_get_drvdata(pdev);
-
-	return 0;
-}
-
-static int init_vpbe_layer(int i, struct vpbe_display *disp_dev,
-			   struct platform_device *pdev)
-{
-	struct vpbe_layer *vpbe_display_layer = NULL;
-	struct video_device *vbd = NULL;
-
-	/* Allocate memory for four plane display objects */
-	disp_dev->dev[i] = kzalloc(sizeof(*disp_dev->dev[i]), GFP_KERNEL);
-	if (!disp_dev->dev[i])
-		return  -ENOMEM;
-
-	spin_lock_init(&disp_dev->dev[i]->irqlock);
-	mutex_init(&disp_dev->dev[i]->opslock);
-
-	/* Get the pointer to the layer object */
-	vpbe_display_layer = disp_dev->dev[i];
-	vbd = &vpbe_display_layer->video_dev;
-	/* Initialize field of video device */
-	vbd->release	= video_device_release_empty;
-	vbd->fops	= &vpbe_fops;
-	vbd->ioctl_ops	= &vpbe_ioctl_ops;
-	vbd->minor	= -1;
-	vbd->v4l2_dev   = &disp_dev->vpbe_dev->v4l2_dev;
-	vbd->lock	= &vpbe_display_layer->opslock;
-	vbd->vfl_dir	= VFL_DIR_TX;
-	vbd->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING;
-
-	if (disp_dev->vpbe_dev->current_timings.timings_type &
-			VPBE_ENC_STD)
-		vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50);
-
-	snprintf(vbd->name, sizeof(vbd->name),
-			"DaVinci_VPBE Display_DRIVER_V%d.%d.%d",
-			(VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff,
-			(VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff,
-			(VPBE_DISPLAY_VERSION_CODE) & 0xff);
-
-	vpbe_display_layer->device_id = i;
-
-	vpbe_display_layer->layer_info.id =
-		((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1);
-
-
-	return 0;
-}
-
-static int register_device(struct vpbe_layer *vpbe_display_layer,
-			   struct vpbe_display *disp_dev,
-			   struct platform_device *pdev)
-{
-	int err;
-
-	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
-		  "Trying to register VPBE display device.\n");
-	v4l2_info(&disp_dev->vpbe_dev->v4l2_dev,
-		  "layer=%p,layer->video_dev=%p\n",
-		  vpbe_display_layer,
-		  &vpbe_display_layer->video_dev);
-
-	vpbe_display_layer->video_dev.queue = &vpbe_display_layer->buffer_queue;
-	err = video_register_device(&vpbe_display_layer->video_dev,
-				    VFL_TYPE_VIDEO,
-				    -1);
-	if (err)
-		return -ENODEV;
-
-	vpbe_display_layer->disp_dev = disp_dev;
-	/* set the driver data in platform device */
-	platform_set_drvdata(pdev, disp_dev);
-	video_set_drvdata(&vpbe_display_layer->video_dev,
-			  vpbe_display_layer);
-
-	return 0;
-}
-
-
-
-/*
- * vpbe_display_probe()
- * This function creates device entries by register itself to the V4L2 driver
- * and initializes fields of each layer objects
- */
-static int vpbe_display_probe(struct platform_device *pdev)
-{
-	struct vpbe_display *disp_dev;
-	struct v4l2_device *v4l2_dev;
-	struct resource *res = NULL;
-	struct vb2_queue *q;
-	int k;
-	int i;
-	int err;
-	int irq;
-
-	printk(KERN_DEBUG "vpbe_display_probe\n");
-	/* Allocate memory for vpbe_display */
-	disp_dev = devm_kzalloc(&pdev->dev, sizeof(*disp_dev), GFP_KERNEL);
-	if (!disp_dev)
-		return -ENOMEM;
-
-	spin_lock_init(&disp_dev->dma_queue_lock);
-	/*
-	 * Scan all the platform devices to find the vpbe
-	 * controller device and get the vpbe_dev object
-	 */
-	err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev,
-			vpbe_device_get);
-	if (err < 0)
-		return err;
-
-	v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev;
-	/* Initialize the vpbe display controller */
-	if (disp_dev->vpbe_dev->ops.initialize) {
-		err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev,
-							 disp_dev->vpbe_dev);
-		if (err) {
-			v4l2_err(v4l2_dev, "Error initing vpbe\n");
-			err = -ENOMEM;
-			goto probe_out;
-		}
-	}
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		if (init_vpbe_layer(i, disp_dev, pdev)) {
-			err = -ENODEV;
-			goto probe_out;
-		}
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		v4l2_err(v4l2_dev, "Unable to get VENC interrupt resource\n");
-		err = -ENODEV;
-		goto probe_out;
-	}
-
-	irq = res->start;
-	err = devm_request_irq(&pdev->dev, irq, venc_isr, 0,
-			       VPBE_DISPLAY_DRIVER, disp_dev);
-	if (err) {
-		v4l2_err(v4l2_dev, "VPBE IRQ request failed\n");
-		goto probe_out;
-	}
-
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		/* initialize vb2 queue */
-		q = &disp_dev->dev[i]->buffer_queue;
-		memset(q, 0, sizeof(*q));
-		q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
-		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
-		q->drv_priv = disp_dev->dev[i];
-		q->ops = &video_qops;
-		q->mem_ops = &vb2_dma_contig_memops;
-		q->buf_struct_size = sizeof(struct vpbe_disp_buffer);
-		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
-		q->min_buffers_needed = 1;
-		q->lock = &disp_dev->dev[i]->opslock;
-		q->dev = disp_dev->vpbe_dev->pdev;
-		err = vb2_queue_init(q);
-		if (err) {
-			v4l2_err(v4l2_dev, "vb2_queue_init() failed\n");
-			goto probe_out;
-		}
-
-		INIT_LIST_HEAD(&disp_dev->dev[i]->dma_queue);
-
-		if (register_device(disp_dev->dev[i], disp_dev, pdev)) {
-			err = -ENODEV;
-			goto probe_out;
-		}
-	}
-
-	v4l2_dbg(1, debug, v4l2_dev,
-		 "Successfully completed the probing of vpbe v4l2 device\n");
-
-	return 0;
-
-probe_out:
-	for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) {
-		/* Unregister video device */
-		if (disp_dev->dev[k]) {
-			video_unregister_device(&disp_dev->dev[k]->video_dev);
-			kfree(disp_dev->dev[k]);
-		}
-	}
-	return err;
-}
-
-/*
- * vpbe_display_remove()
- * It un-register hardware layer from V4L2 driver
- */
-static int vpbe_display_remove(struct platform_device *pdev)
-{
-	struct vpbe_layer *vpbe_display_layer;
-	struct vpbe_display *disp_dev = platform_get_drvdata(pdev);
-	struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev;
-	int i;
-
-	v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n");
-
-	/* deinitialize the vpbe display controller */
-	if (vpbe_dev->ops.deinitialize)
-		vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev);
-	/* un-register device */
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		/* Get the pointer to the layer object */
-		vpbe_display_layer = disp_dev->dev[i];
-		/* Unregister video device */
-		video_unregister_device(&vpbe_display_layer->video_dev);
-
-	}
-	for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) {
-		kfree(disp_dev->dev[i]);
-		disp_dev->dev[i] = NULL;
-	}
-
-	return 0;
-}
-
-static struct platform_driver vpbe_display_driver = {
-	.driver = {
-		.name = VPBE_DISPLAY_DRIVER,
-		.bus = &platform_bus_type,
-	},
-	.probe = vpbe_display_probe,
-	.remove = vpbe_display_remove,
-};
-
-module_platform_driver(vpbe_display_driver);
-
-MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/ti/davinci/vpbe_osd.c b/drivers/media/platform/ti/davinci/vpbe_osd.c
deleted file mode 100644
index 32f7ef547c82..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe_osd.c
+++ /dev/null
@@ -1,1582 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2007-2010 Texas Instruments Inc
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Andy Lowe (alowe@mvista.com), MontaVista Software
- * - Initial version
- * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
- * - ported to sub device interface
- */
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-
-#include <media/davinci/vpss.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_osd.h>
-
-#include <linux/io.h>
-#include "vpbe_osd_regs.h"
-
-#define MODULE_NAME	"davinci-vpbe-osd"
-
-static const struct platform_device_id vpbe_osd_devtype[] = {
-	{
-		.name = DM644X_VPBE_OSD_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_1,
-	}, {
-		.name = DM365_VPBE_OSD_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_2,
-	}, {
-		.name = DM355_VPBE_OSD_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_3,
-	},
-	{
-		/* sentinel */
-	}
-};
-
-MODULE_DEVICE_TABLE(platform, vpbe_osd_devtype);
-
-/* register access routines */
-static inline u32 __always_unused osd_read(struct osd_state *sd, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	return readl(osd->osd_base + offset);
-}
-
-static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	writel(val, osd->osd_base + offset);
-
-	return val;
-}
-
-static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	void __iomem *addr = osd->osd_base + offset;
-	u32 val = readl(addr) | mask;
-
-	writel(val, addr);
-
-	return val;
-}
-
-static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	void __iomem *addr = osd->osd_base + offset;
-	u32 val = readl(addr) & ~mask;
-
-	writel(val, addr);
-
-	return val;
-}
-
-static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val,
-				 u32 offset)
-{
-	struct osd_state *osd = sd;
-
-	void __iomem *addr = osd->osd_base + offset;
-	u32 new_val = (readl(addr) & ~mask) | (val & mask);
-
-	writel(new_val, addr);
-
-	return new_val;
-}
-
-/* define some macros for layer and pixfmt classification */
-#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1))
-#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1))
-#define is_rgb_pixfmt(pixfmt) \
-	(((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888))
-#define is_yc_pixfmt(pixfmt) \
-	(((pixfmt) == PIXFMT_YCBCRI) || ((pixfmt) == PIXFMT_YCRCBI) || \
-	((pixfmt) == PIXFMT_NV12))
-#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X
-#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5)
-
-/**
- * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446
- * @sd: ptr to struct osd_state
- * @field_inversion: inversion flag
- * @fb_base_phys: frame buffer address
- * @lconfig: ptr to layer config
- *
- * This routine implements a workaround for the field signal inversion silicon
- * erratum described in Advisory 1.3.8 for the DM6446.  The fb_base_phys and
- * lconfig parameters apply to the vid0 window.  This routine should be called
- * whenever the vid0 layer configuration or start address is modified, or when
- * the OSD field inversion setting is modified.
- * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or
- *          0 otherwise
- */
-static int _osd_dm6446_vid0_pingpong(struct osd_state *sd,
-				     int field_inversion,
-				     unsigned long fb_base_phys,
-				     const struct osd_layer_config *lconfig)
-{
-	struct osd_platform_data *pdata;
-
-	pdata = (struct osd_platform_data *)sd->dev->platform_data;
-	if (pdata != NULL && pdata->field_inv_wa_enable) {
-
-		if (!field_inversion || !lconfig->interlaced) {
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR);
-			osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0,
-				   OSD_MISCCTL);
-			return 0;
-		} else {
-			unsigned miscctl = OSD_MISCCTL_PPRV;
-
-			osd_write(sd,
-				(fb_base_phys & ~0x1F) - lconfig->line_length,
-				OSD_VIDWIN0ADR);
-			osd_write(sd,
-				(fb_base_phys & ~0x1F) + lconfig->line_length,
-				OSD_PPVWIN0ADR);
-			osd_modify(sd,
-				OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl,
-				OSD_MISCCTL);
-
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-static void _osd_set_field_inversion(struct osd_state *sd, int enable)
-{
-	unsigned fsinv = 0;
-
-	if (enable)
-		fsinv = OSD_MODE_FSINV;
-
-	osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE);
-}
-
-static void _osd_set_blink_attribute(struct osd_state *sd, int enable,
-				     enum osd_blink_interval blink)
-{
-	u32 osdatrmd = 0;
-
-	if (enable) {
-		osdatrmd |= OSD_OSDATRMD_BLNK;
-		osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT;
-	}
-	/* caller must ensure that OSD1 is configured in attribute mode */
-	osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd,
-		  OSD_OSDATRMD);
-}
-
-static void _osd_set_rom_clut(struct osd_state *sd,
-			      enum osd_rom_clut rom_clut)
-{
-	if (rom_clut == ROM_CLUT0)
-		osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
-	else
-		osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL);
-}
-
-static void _osd_set_palette_map(struct osd_state *sd,
-				 enum osd_win_layer osdwin,
-				 unsigned char pixel_value,
-				 unsigned char clut_index,
-				 enum osd_pix_format pixfmt)
-{
-	static const int map_2bpp[] = { 0, 5, 10, 15 };
-	static const int map_1bpp[] = { 0, 15 };
-	int bmp_offset;
-	int bmp_shift;
-	int bmp_mask;
-	int bmp_reg;
-
-	switch (pixfmt) {
-	case PIXFMT_1BPP:
-		bmp_reg = map_1bpp[pixel_value & 0x1];
-		break;
-	case PIXFMT_2BPP:
-		bmp_reg = map_2bpp[pixel_value & 0x3];
-		break;
-	case PIXFMT_4BPP:
-		bmp_reg = pixel_value & 0xf;
-		break;
-	default:
-		return;
-	}
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32);
-		break;
-	case OSDWIN_OSD1:
-		bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32);
-		break;
-	default:
-		return;
-	}
-
-	if (bmp_reg & 1) {
-		bmp_shift = 8;
-		bmp_mask = 0xff << 8;
-	} else {
-		bmp_shift = 0;
-		bmp_mask = 0xff;
-	}
-
-	osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset);
-}
-
-static void _osd_set_rec601_attenuation(struct osd_state *sd,
-					enum osd_win_layer osdwin, int enable)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
-			  enable ? OSD_OSDWIN0MD_ATN0E : 0,
-			  OSD_OSDWIN0MD);
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_modify(sd, OSD_OSDWIN0MD_ATN0E,
-				  enable ? OSD_OSDWIN0MD_ATN0E : 0,
-				  OSD_OSDWIN0MD);
-		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-			   (sd->vpbe_type == VPBE_VERSION_2))
-			osd_modify(sd, OSD_EXTMODE_ATNOSD0EN,
-				  enable ? OSD_EXTMODE_ATNOSD0EN : 0,
-				  OSD_EXTMODE);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
-			  enable ? OSD_OSDWIN1MD_ATN1E : 0,
-			  OSD_OSDWIN1MD);
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_modify(sd, OSD_OSDWIN1MD_ATN1E,
-				  enable ? OSD_OSDWIN1MD_ATN1E : 0,
-				  OSD_OSDWIN1MD);
-		else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-			   (sd->vpbe_type == VPBE_VERSION_2))
-			osd_modify(sd, OSD_EXTMODE_ATNOSD1EN,
-				  enable ? OSD_EXTMODE_ATNOSD1EN : 0,
-				  OSD_EXTMODE);
-		break;
-	}
-}
-
-static void _osd_set_blending_factor(struct osd_state *sd,
-				     enum osd_win_layer osdwin,
-				     enum osd_blending_factor blend)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_OSDWIN0MD_BLND0,
-			  blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_OSDWIN1MD_BLND1,
-			  blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_enable_rgb888_pixblend(struct osd_state *sd,
-					enum osd_win_layer osdwin)
-{
-
-	osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL);
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR,
-			  OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE);
-		break;
-	case OSDWIN_OSD1:
-		osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR,
-			  OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE);
-		break;
-	}
-}
-
-static void _osd_enable_color_key(struct osd_state *sd,
-				  enum osd_win_layer osdwin,
-				  unsigned colorkey,
-				  enum osd_pix_format pixfmt)
-{
-	switch (pixfmt) {
-	case PIXFMT_1BPP:
-	case PIXFMT_2BPP:
-	case PIXFMT_4BPP:
-	case PIXFMT_8BPP:
-		if (sd->vpbe_type == VPBE_VERSION_3) {
-			switch (osdwin) {
-			case OSDWIN_OSD0:
-				osd_modify(sd, OSD_TRANSPBMPIDX_BMP0,
-					  colorkey <<
-					  OSD_TRANSPBMPIDX_BMP0_SHIFT,
-					  OSD_TRANSPBMPIDX);
-				break;
-			case OSDWIN_OSD1:
-				osd_modify(sd, OSD_TRANSPBMPIDX_BMP1,
-					  colorkey <<
-					  OSD_TRANSPBMPIDX_BMP1_SHIFT,
-					  OSD_TRANSPBMPIDX);
-				break;
-			}
-		}
-		break;
-	case PIXFMT_RGB565:
-		if (sd->vpbe_type == VPBE_VERSION_1)
-			osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS,
-				  OSD_TRANSPVAL);
-		else if (sd->vpbe_type == VPBE_VERSION_3)
-			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
-				  OSD_TRANSPVALL);
-		break;
-	case PIXFMT_YCBCRI:
-	case PIXFMT_YCRCBI:
-		if (sd->vpbe_type == VPBE_VERSION_3)
-			osd_modify(sd, OSD_TRANSPVALU_Y, colorkey,
-				   OSD_TRANSPVALU);
-		break;
-	case PIXFMT_RGB888:
-		if (sd->vpbe_type == VPBE_VERSION_3) {
-			osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL,
-				  OSD_TRANSPVALL);
-			osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16,
-				  OSD_TRANSPVALU);
-		}
-		break;
-	default:
-		break;
-	}
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_disable_color_key(struct osd_state *sd,
-				   enum osd_win_layer osdwin)
-{
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_set_osd_clut(struct osd_state *sd,
-			      enum osd_win_layer osdwin,
-			      enum osd_clut clut)
-{
-	u32 winmd = 0;
-
-	switch (osdwin) {
-	case OSDWIN_OSD0:
-		if (clut == RAM_CLUT)
-			winmd |= OSD_OSDWIN0MD_CLUTS0;
-		osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD);
-		break;
-	case OSDWIN_OSD1:
-		if (clut == RAM_CLUT)
-			winmd |= OSD_OSDWIN1MD_CLUTS1;
-		osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD);
-		break;
-	}
-}
-
-static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer,
-			  enum osd_zoom_factor h_zoom,
-			  enum osd_zoom_factor v_zoom)
-{
-	u32 winmd = 0;
-
-	switch (layer) {
-	case WIN_OSD0:
-		winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT);
-		winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT);
-		osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd,
-			  OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT);
-		winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT);
-		osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd,
-			  OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT);
-		winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT);
-		osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd,
-			  OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT);
-		winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT);
-		osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd,
-			  OSD_VIDWINMD);
-		break;
-	}
-}
-
-static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	switch (layer) {
-	case WIN_OSD0:
-		osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		/* disable attribute mode as well as disabling the window */
-		osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
-			  OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
-		break;
-	}
-}
-
-static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (!win->is_enabled) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return;
-	}
-	win->is_enabled = 0;
-
-	_osd_disable_layer(sd, layer);
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void _osd_enable_attribute_mode(struct osd_state *sd)
-{
-	/* enable attribute mode for OSD1 */
-	osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD);
-}
-
-static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	switch (layer) {
-	case WIN_OSD0:
-		osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD);
-		break;
-	case WIN_VID0:
-		osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD);
-		break;
-	case WIN_OSD1:
-		/* enable OSD1 and disable attribute mode */
-		osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1,
-			  OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD);
-		break;
-	case WIN_VID1:
-		osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD);
-		break;
-	}
-}
-
-static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer,
-			    int otherwin)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	/*
-	 * use otherwin flag to know this is the other vid window
-	 * in YUV420 mode, if is, skip this check
-	 */
-	if (!otherwin && (!win->is_allocated ||
-			!win->fb_base_phys ||
-			!cfg->line_length ||
-			!cfg->xsize ||
-			!cfg->ysize)) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return -1;
-	}
-
-	if (win->is_enabled) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return 0;
-	}
-	win->is_enabled = 1;
-
-	if (cfg->pixfmt != PIXFMT_OSD_ATTR)
-		_osd_enable_layer(sd, layer);
-	else {
-		_osd_enable_attribute_mode(sd);
-		_osd_set_blink_attribute(sd, osd->is_blinking, osd->blink);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-#define OSD_SRC_ADDR_HIGH4	0x7800000
-#define OSD_SRC_ADDR_HIGH7	0x7F0000
-#define OSD_SRCADD_OFSET_SFT	23
-#define OSD_SRCADD_ADD_SFT	16
-#define OSD_WINADL_MASK		0xFFFF
-#define OSD_WINOFST_MASK	0x1000
-#define VPBE_REG_BASE		0x80000000
-
-static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer,
-			     unsigned long fb_base_phys,
-			     unsigned long cbcr_ofst)
-{
-
-	if (sd->vpbe_type == VPBE_VERSION_1) {
-		switch (layer) {
-		case WIN_OSD0:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR);
-			break;
-		case WIN_VID0:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR);
-			break;
-		case WIN_OSD1:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR);
-			break;
-		case WIN_VID1:
-			osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR);
-			break;
-	      }
-	} else if (sd->vpbe_type == VPBE_VERSION_3) {
-		unsigned long fb_offset_32 =
-		    (fb_base_phys - VPBE_REG_BASE) >> 5;
-
-		switch (layer) {
-		case WIN_OSD0:
-			osd_modify(sd, OSD_OSDWINADH_O0AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_OSDWINADH_O0AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL,
-				  OSD_OSDWIN0ADL);
-			break;
-		case WIN_VID0:
-			osd_modify(sd, OSD_VIDWINADH_V0AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_VIDWINADH_V0AH_SHIFT),
-				  OSD_VIDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL,
-				  OSD_VIDWIN0ADL);
-			break;
-		case WIN_OSD1:
-			osd_modify(sd, OSD_OSDWINADH_O1AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_OSDWINADH_O1AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL,
-				  OSD_OSDWIN1ADL);
-			break;
-		case WIN_VID1:
-			osd_modify(sd, OSD_VIDWINADH_V1AH,
-				  fb_offset_32 >> (OSD_SRCADD_ADD_SFT -
-						   OSD_VIDWINADH_V1AH_SHIFT),
-				  OSD_VIDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL,
-				  OSD_VIDWIN1ADL);
-			break;
-		}
-	} else if (sd->vpbe_type == VPBE_VERSION_2) {
-		struct osd_window_state *win = &sd->win[layer];
-		unsigned long fb_offset_32, cbcr_offset_32;
-
-		fb_offset_32 = fb_base_phys - VPBE_REG_BASE;
-		if (cbcr_ofst)
-			cbcr_offset_32 = cbcr_ofst;
-		else
-			cbcr_offset_32 = win->lconfig.line_length *
-					 win->lconfig.ysize;
-		cbcr_offset_32 += fb_offset_32;
-		fb_offset_32 = fb_offset_32 >> 5;
-		cbcr_offset_32 = cbcr_offset_32 >> 5;
-		/*
-		 * DM365: start address is 27-bit long address b26 - b23 are
-		 * in offset register b12 - b9, and * bit 26 has to be '1'
-		 */
-		if (win->lconfig.pixfmt == PIXFMT_NV12) {
-			switch (layer) {
-			case WIN_VID0:
-			case WIN_VID1:
-				/* Y is in VID0 */
-				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
-				osd_modify(sd, OSD_VIDWINADH_V0AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V0AH_SHIFT),
-					   OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN0ADL);
-				/* CbCr is in VID1 */
-				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
-					 ((cbcr_offset_32 &
-					 OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
-				osd_modify(sd, OSD_VIDWINADH_V1AH,
-					  (cbcr_offset_32 &
-					  OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V1AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN1ADL);
-				break;
-			default:
-				break;
-			}
-		}
-
-		switch (layer) {
-		case WIN_OSD0:
-			osd_modify(sd, OSD_OSDWIN0OFST_O0AH,
-				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-				 (OSD_SRCADD_OFSET_SFT -
-				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
-				  OSD_OSDWIN0OFST);
-			osd_modify(sd, OSD_OSDWINADH_O0AH,
-				 (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-				 (OSD_SRCADD_ADD_SFT -
-				 OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					OSD_OSDWIN0ADL);
-			break;
-		case WIN_VID0:
-			if (win->lconfig.pixfmt != PIXFMT_NV12) {
-				osd_modify(sd, OSD_VIDWIN0OFST_V0AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN0OFST);
-				osd_modify(sd, OSD_VIDWINADH_V0AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V0AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN0ADL);
-			}
-			break;
-		case WIN_OSD1:
-			osd_modify(sd, OSD_OSDWIN1OFST_O1AH,
-				 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-				 (OSD_SRCADD_OFSET_SFT -
-				 OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK,
-				  OSD_OSDWIN1OFST);
-			osd_modify(sd, OSD_OSDWINADH_O1AH,
-				  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-				  (OSD_SRCADD_ADD_SFT -
-				  OSD_OSDWINADH_O1AH_SHIFT),
-				  OSD_OSDWINADH);
-			osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					OSD_OSDWIN1ADL);
-			break;
-		case WIN_VID1:
-			if (win->lconfig.pixfmt != PIXFMT_NV12) {
-				osd_modify(sd, OSD_VIDWIN1OFST_V1AH,
-					 ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >>
-					 (OSD_SRCADD_OFSET_SFT -
-					 OSD_WINOFST_AH_SHIFT)) |
-					 OSD_WINOFST_MASK, OSD_VIDWIN1OFST);
-				osd_modify(sd, OSD_VIDWINADH_V1AH,
-					  (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >>
-					  (OSD_SRCADD_ADD_SFT -
-					  OSD_VIDWINADH_V1AH_SHIFT),
-					  OSD_VIDWINADH);
-				osd_write(sd, fb_offset_32 & OSD_WINADL_MASK,
-					  OSD_VIDWIN1ADL);
-			}
-			break;
-		}
-	}
-}
-
-static void osd_start_layer(struct osd_state *sd, enum osd_layer layer,
-			    unsigned long fb_base_phys,
-			    unsigned long cbcr_ofst)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->fb_base_phys = fb_base_phys & ~0x1F;
-	_osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst);
-
-	if (layer == WIN_VID0) {
-		osd->pingpong =
-		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
-						       win->fb_base_phys,
-						       cfg);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer,
-				 struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	*lconfig = win->lconfig;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-/**
- * try_layer_config() - Try a specific configuration for the layer
- * @sd: ptr to struct osd_state
- * @layer: layer to configure
- * @lconfig: layer configuration to try
- *
- * If the requested lconfig is completely rejected and the value of lconfig on
- * exit is the current lconfig, then try_layer_config() returns 1.  Otherwise,
- * try_layer_config() returns 0.  A return value of 0 does not necessarily mean
- * that the value of lconfig on exit is identical to the value of lconfig on
- * entry, but merely that it represents a change from the current lconfig.
- */
-static int try_layer_config(struct osd_state *sd, enum osd_layer layer,
-			    struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	int bad_config = 0;
-
-	/* verify that the pixel format is compatible with the layer */
-	switch (lconfig->pixfmt) {
-	case PIXFMT_1BPP:
-	case PIXFMT_2BPP:
-	case PIXFMT_4BPP:
-	case PIXFMT_8BPP:
-	case PIXFMT_RGB565:
-		if (osd->vpbe_type == VPBE_VERSION_1)
-			bad_config = !is_vid_win(layer);
-		break;
-	case PIXFMT_YCBCRI:
-	case PIXFMT_YCRCBI:
-		bad_config = !is_vid_win(layer);
-		break;
-	case PIXFMT_RGB888:
-		if (osd->vpbe_type == VPBE_VERSION_1)
-			bad_config = !is_vid_win(layer);
-		else if ((osd->vpbe_type == VPBE_VERSION_3) ||
-			 (osd->vpbe_type == VPBE_VERSION_2))
-			bad_config = !is_osd_win(layer);
-		break;
-	case PIXFMT_NV12:
-		if (osd->vpbe_type != VPBE_VERSION_2)
-			bad_config = 1;
-		else
-			bad_config = is_osd_win(layer);
-		break;
-	case PIXFMT_OSD_ATTR:
-		bad_config = (layer != WIN_OSD1);
-		break;
-	default:
-		bad_config = 1;
-		break;
-	}
-	if (bad_config) {
-		/*
-		 * The requested pixel format is incompatible with the layer,
-		 * so keep the current layer configuration.
-		 */
-		*lconfig = win->lconfig;
-		return bad_config;
-	}
-
-	/* DM6446: */
-	/* only one OSD window at a time can use RGB pixel formats */
-	if ((osd->vpbe_type == VPBE_VERSION_1) &&
-	    is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) {
-		enum osd_pix_format pixfmt;
-
-		if (layer == WIN_OSD0)
-			pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt;
-		else
-			pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt;
-
-		if (is_rgb_pixfmt(pixfmt)) {
-			/*
-			 * The other OSD window is already configured for an
-			 * RGB, so keep the current layer configuration.
-			 */
-			*lconfig = win->lconfig;
-			return 1;
-		}
-	}
-
-	/* DM6446: only one video window at a time can use RGB888 */
-	if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) &&
-		lconfig->pixfmt == PIXFMT_RGB888) {
-		enum osd_pix_format pixfmt;
-
-		if (layer == WIN_VID0)
-			pixfmt = osd->win[WIN_VID1].lconfig.pixfmt;
-		else
-			pixfmt = osd->win[WIN_VID0].lconfig.pixfmt;
-
-		if (pixfmt == PIXFMT_RGB888) {
-			/*
-			 * The other video window is already configured for
-			 * RGB888, so keep the current layer configuration.
-			 */
-			*lconfig = win->lconfig;
-			return 1;
-		}
-	}
-
-	/* window dimensions must be non-zero */
-	if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) {
-		*lconfig = win->lconfig;
-		return 1;
-	}
-
-	/* round line_length up to a multiple of 32 */
-	lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32;
-	lconfig->line_length =
-	    min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH);
-	lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE);
-	lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE);
-	lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE);
-	lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE);
-	lconfig->interlaced = (lconfig->interlaced != 0);
-	if (lconfig->interlaced) {
-		/* ysize and ypos must be even for interlaced displays */
-		lconfig->ysize &= ~1;
-		lconfig->ypos &= ~1;
-	}
-
-	return 0;
-}
-
-static void _osd_disable_vid_rgb888(struct osd_state *sd)
-{
-	/*
-	 * The DM6446 supports RGB888 pixel format in a single video window.
-	 * This routine disables RGB888 pixel format for both video windows.
-	 * The caller must ensure that neither video window is currently
-	 * configured for RGB888 pixel format.
-	 */
-	if (sd->vpbe_type == VPBE_VERSION_1)
-		osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL);
-}
-
-static void _osd_enable_vid_rgb888(struct osd_state *sd,
-				   enum osd_layer layer)
-{
-	/*
-	 * The DM6446 supports RGB888 pixel format in a single video window.
-	 * This routine enables RGB888 pixel format for the specified video
-	 * window.  The caller must ensure that the other video window is not
-	 * currently configured for RGB888 pixel format, as this routine will
-	 * disable RGB888 pixel format for the other window.
-	 */
-	if (sd->vpbe_type == VPBE_VERSION_1) {
-		if (layer == WIN_VID0)
-			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL_RGBEN, OSD_MISCCTL);
-		else if (layer == WIN_VID1)
-			osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN,
-				  OSD_MISCCTL);
-	}
-}
-
-static void _osd_set_cbcr_order(struct osd_state *sd,
-				enum osd_pix_format pixfmt)
-{
-	/*
-	 * The caller must ensure that all windows using YC pixfmt use the same
-	 * Cb/Cr order.
-	 */
-	if (pixfmt == PIXFMT_YCBCRI)
-		osd_clear(sd, OSD_MODE_CS, OSD_MODE);
-	else if (pixfmt == PIXFMT_YCRCBI)
-		osd_set(sd, OSD_MODE_CS, OSD_MODE);
-}
-
-static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
-				  const struct osd_layer_config *lconfig)
-{
-	u32 winmd = 0, winmd_mask = 0, bmw = 0;
-
-	_osd_set_cbcr_order(sd, lconfig->pixfmt);
-
-	switch (layer) {
-	case WIN_OSD0:
-		if (sd->vpbe_type == VPBE_VERSION_1) {
-			winmd_mask |= OSD_OSDWIN0MD_RGB0E;
-			if (lconfig->pixfmt == PIXFMT_RGB565)
-				winmd |= OSD_OSDWIN0MD_RGB0E;
-		} else if ((sd->vpbe_type == VPBE_VERSION_3) ||
-		  (sd->vpbe_type == VPBE_VERSION_2)) {
-			winmd_mask |= OSD_OSDWIN0MD_BMP0MD;
-			switch (lconfig->pixfmt) {
-			case PIXFMT_RGB565:
-					winmd |= (1 <<
-					OSD_OSDWIN0MD_BMP0MD_SHIFT);
-					break;
-			case PIXFMT_RGB888:
-				winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
-				_osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0);
-				break;
-			case PIXFMT_YCBCRI:
-			case PIXFMT_YCRCBI:
-				winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT);
-				break;
-			default:
-				break;
-			}
-		}
-
-		winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0;
-
-		switch (lconfig->pixfmt) {
-		case PIXFMT_1BPP:
-			bmw = 0;
-			break;
-		case PIXFMT_2BPP:
-			bmw = 1;
-			break;
-		case PIXFMT_4BPP:
-			bmw = 2;
-			break;
-		case PIXFMT_8BPP:
-			bmw = 3;
-			break;
-		default:
-			break;
-		}
-		winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT);
-
-		if (lconfig->interlaced)
-			winmd |= OSD_OSDWIN0MD_OFF0;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST);
-		osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP);
-		osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL);
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL);
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP);
-			osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL);
-		}
-		break;
-	case WIN_VID0:
-		winmd_mask |= OSD_VIDWINMD_VFF0;
-		if (lconfig->interlaced)
-			winmd |= OSD_VIDWINMD_VFF0;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST);
-		osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
-		osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
-		/*
-		 * For YUV420P format the register contents are
-		 * duplicated in both VID registers
-		 */
-		if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				(lconfig->pixfmt == PIXFMT_NV12)) {
-			/* other window also */
-			if (lconfig->interlaced) {
-				winmd_mask |= OSD_VIDWINMD_VFF1;
-				winmd |= OSD_VIDWINMD_VFF1;
-				osd_modify(sd, winmd_mask, winmd,
-					  OSD_VIDWINMD);
-			}
-
-			osd_modify(sd, OSD_MISCCTL_S420D,
-				    OSD_MISCCTL_S420D, OSD_MISCCTL);
-			osd_write(sd, lconfig->line_length >> 5,
-				  OSD_VIDWIN1OFST);
-			osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
-			osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
-			/*
-			  * if NV21 pixfmt and line length not 32B
-			  * aligned (e.g. NTSC), Need to set window
-			  * X pixel size to be 32B aligned as well
-			  */
-			if (lconfig->xsize % 32) {
-				osd_write(sd,
-					  ((lconfig->xsize + 31) & ~31),
-					  OSD_VIDWIN1XL);
-				osd_write(sd,
-					  ((lconfig->xsize + 31) & ~31),
-					  OSD_VIDWIN0XL);
-			}
-		} else if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				(lconfig->pixfmt != PIXFMT_NV12)) {
-			osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D,
-						OSD_MISCCTL);
-		}
-
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos >> 1,
-					  OSD_VIDWIN1YP);
-				osd_write(sd, lconfig->ysize >> 1,
-					  OSD_VIDWIN1YL);
-			}
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
-			osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
-				osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
-			}
-		}
-		break;
-	case WIN_OSD1:
-		/*
-		 * The caller must ensure that OSD1 is disabled prior to
-		 * switching from a normal mode to attribute mode or from
-		 * attribute mode to a normal mode.
-		 */
-		if (lconfig->pixfmt == PIXFMT_OSD_ATTR) {
-			if (sd->vpbe_type == VPBE_VERSION_1) {
-				winmd_mask |= OSD_OSDWIN1MD_ATN1E |
-				OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 |
-				OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1;
-			} else {
-				winmd_mask |= OSD_OSDWIN1MD_BMP1MD |
-				OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 |
-				OSD_OSDWIN1MD_TE1;
-			}
-		} else {
-			if (sd->vpbe_type == VPBE_VERSION_1) {
-				winmd_mask |= OSD_OSDWIN1MD_RGB1E;
-				if (lconfig->pixfmt == PIXFMT_RGB565)
-					winmd |= OSD_OSDWIN1MD_RGB1E;
-			} else if ((sd->vpbe_type == VPBE_VERSION_3)
-				   || (sd->vpbe_type == VPBE_VERSION_2)) {
-				winmd_mask |= OSD_OSDWIN1MD_BMP1MD;
-				switch (lconfig->pixfmt) {
-				case PIXFMT_RGB565:
-					winmd |=
-					    (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					break;
-				case PIXFMT_RGB888:
-					winmd |=
-					    (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					_osd_enable_rgb888_pixblend(sd,
-							OSDWIN_OSD1);
-					break;
-				case PIXFMT_YCBCRI:
-				case PIXFMT_YCRCBI:
-					winmd |=
-					    (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT);
-					break;
-				default:
-					break;
-				}
-			}
-
-			winmd_mask |= OSD_OSDWIN1MD_BMW1;
-			switch (lconfig->pixfmt) {
-			case PIXFMT_1BPP:
-				bmw = 0;
-				break;
-			case PIXFMT_2BPP:
-				bmw = 1;
-				break;
-			case PIXFMT_4BPP:
-				bmw = 2;
-				break;
-			case PIXFMT_8BPP:
-				bmw = 3;
-				break;
-			default:
-				break;
-			}
-			winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT);
-		}
-
-		winmd_mask |= OSD_OSDWIN1MD_OFF1;
-		if (lconfig->interlaced)
-			winmd |= OSD_OSDWIN1MD_OFF1;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST);
-		osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP);
-		osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL);
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL);
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP);
-			osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL);
-		}
-		break;
-	case WIN_VID1:
-		winmd_mask |= OSD_VIDWINMD_VFF1;
-		if (lconfig->interlaced)
-			winmd |= OSD_VIDWINMD_VFF1;
-
-		osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD);
-		osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST);
-		osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP);
-		osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL);
-		/*
-		 * For YUV420P format the register contents are
-		 * duplicated in both VID registers
-		 */
-		if (sd->vpbe_type == VPBE_VERSION_2) {
-			if (lconfig->pixfmt == PIXFMT_NV12) {
-				/* other window also */
-				if (lconfig->interlaced) {
-					winmd_mask |= OSD_VIDWINMD_VFF0;
-					winmd |= OSD_VIDWINMD_VFF0;
-					osd_modify(sd, winmd_mask, winmd,
-						  OSD_VIDWINMD);
-				}
-				osd_modify(sd, OSD_MISCCTL_S420D,
-					   OSD_MISCCTL_S420D, OSD_MISCCTL);
-				osd_write(sd, lconfig->line_length >> 5,
-					  OSD_VIDWIN0OFST);
-				osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP);
-				osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL);
-			} else {
-				osd_modify(sd, OSD_MISCCTL_S420D,
-					   ~OSD_MISCCTL_S420D, OSD_MISCCTL);
-			}
-		}
-
-		if (lconfig->interlaced) {
-			osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP);
-			osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos >> 1,
-					  OSD_VIDWIN0YP);
-				osd_write(sd, lconfig->ysize >> 1,
-					  OSD_VIDWIN0YL);
-			}
-		} else {
-			osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP);
-			osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL);
-			if ((sd->vpbe_type == VPBE_VERSION_2) &&
-				lconfig->pixfmt == PIXFMT_NV12) {
-				osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP);
-				osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL);
-			}
-		}
-		break;
-	}
-}
-
-static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer,
-				struct osd_layer_config *lconfig)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-	int reject_config;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	reject_config = try_layer_config(sd, layer, lconfig);
-	if (reject_config) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return reject_config;
-	}
-
-	/* update the current Cb/Cr order */
-	if (is_yc_pixfmt(lconfig->pixfmt))
-		osd->yc_pixfmt = lconfig->pixfmt;
-
-	/*
-	 * If we are switching OSD1 from normal mode to attribute mode or from
-	 * attribute mode to normal mode, then we must disable the window.
-	 */
-	if (layer == WIN_OSD1) {
-		if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) ||
-		  ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt == PIXFMT_OSD_ATTR))) {
-			win->is_enabled = 0;
-			_osd_disable_layer(sd, layer);
-		}
-	}
-
-	_osd_set_layer_config(sd, layer, lconfig);
-
-	if (layer == WIN_OSD1) {
-		struct osd_osdwin_state *osdwin_state =
-		    &osd->osdwin[OSDWIN_OSD1];
-
-		if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt == PIXFMT_OSD_ATTR)) {
-			/*
-			 * We just switched OSD1 from attribute mode to normal
-			 * mode, so we must initialize the CLUT select, the
-			 * blend factor, transparency colorkey enable, and
-			 * attenuation enable (DM6446 only) bits in the
-			 * OSDWIN1MD register.
-			 */
-			_osd_set_osd_clut(sd, OSDWIN_OSD1,
-						   osdwin_state->clut);
-			_osd_set_blending_factor(sd, OSDWIN_OSD1,
-							  osdwin_state->blend);
-			if (osdwin_state->colorkey_blending) {
-				_osd_enable_color_key(sd, OSDWIN_OSD1,
-							       osdwin_state->
-							       colorkey,
-							       lconfig->pixfmt);
-			} else
-				_osd_disable_color_key(sd, OSDWIN_OSD1);
-			_osd_set_rec601_attenuation(sd, OSDWIN_OSD1,
-						    osdwin_state->
-						    rec601_attenuation);
-		} else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) &&
-		  (cfg->pixfmt != PIXFMT_OSD_ATTR)) {
-			/*
-			 * We just switched OSD1 from normal mode to attribute
-			 * mode, so we must initialize the blink enable and
-			 * blink interval bits in the OSDATRMD register.
-			 */
-			_osd_set_blink_attribute(sd, osd->is_blinking,
-							  osd->blink);
-		}
-	}
-
-	/*
-	 * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format
-	 * then configure a default palette map.
-	 */
-	if ((lconfig->pixfmt != cfg->pixfmt) &&
-	  ((lconfig->pixfmt == PIXFMT_1BPP) ||
-	  (lconfig->pixfmt == PIXFMT_2BPP) ||
-	  (lconfig->pixfmt == PIXFMT_4BPP))) {
-		enum osd_win_layer osdwin =
-		    ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1);
-		struct osd_osdwin_state *osdwin_state =
-		    &osd->osdwin[osdwin];
-		unsigned char clut_index;
-		unsigned char clut_entries = 0;
-
-		switch (lconfig->pixfmt) {
-		case PIXFMT_1BPP:
-			clut_entries = 2;
-			break;
-		case PIXFMT_2BPP:
-			clut_entries = 4;
-			break;
-		case PIXFMT_4BPP:
-			clut_entries = 16;
-			break;
-		default:
-			break;
-		}
-		/*
-		 * The default palette map maps the pixel value to the clut
-		 * index, i.e. pixel value 0 maps to clut entry 0, pixel value
-		 * 1 maps to clut entry 1, etc.
-		 */
-		for (clut_index = 0; clut_index < 16; clut_index++) {
-			osdwin_state->palette_map[clut_index] = clut_index;
-			if (clut_index < clut_entries) {
-				_osd_set_palette_map(sd, osdwin, clut_index,
-						     clut_index,
-						     lconfig->pixfmt);
-			}
-		}
-	}
-
-	*cfg = *lconfig;
-	/* DM6446: configure the RGB888 enable and window selection */
-	if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888)
-		_osd_enable_vid_rgb888(sd, WIN_VID0);
-	else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888)
-		_osd_enable_vid_rgb888(sd, WIN_VID1);
-	else
-		_osd_disable_vid_rgb888(sd);
-
-	if (layer == WIN_VID0) {
-		osd->pingpong =
-		    _osd_dm6446_vid0_pingpong(sd, osd->field_inversion,
-						       win->fb_base_phys,
-						       cfg);
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-static void osd_init_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	enum osd_win_layer osdwin;
-	struct osd_osdwin_state *osdwin_state;
-	struct osd_layer_config *cfg = &win->lconfig;
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->is_enabled = 0;
-	_osd_disable_layer(sd, layer);
-
-	win->h_zoom = ZOOM_X1;
-	win->v_zoom = ZOOM_X1;
-	_osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom);
-
-	win->fb_base_phys = 0;
-	_osd_start_layer(sd, layer, win->fb_base_phys, 0);
-
-	cfg->line_length = 0;
-	cfg->xsize = 0;
-	cfg->ysize = 0;
-	cfg->xpos = 0;
-	cfg->ypos = 0;
-	cfg->interlaced = 0;
-	switch (layer) {
-	case WIN_OSD0:
-	case WIN_OSD1:
-		osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1;
-		osdwin_state = &osd->osdwin[osdwin];
-		/*
-		 * Other code relies on the fact that OSD windows default to a
-		 * bitmap pixel format when they are deallocated, so don't
-		 * change this default pixel format.
-		 */
-		cfg->pixfmt = PIXFMT_8BPP;
-		_osd_set_layer_config(sd, layer, cfg);
-		osdwin_state->clut = RAM_CLUT;
-		_osd_set_osd_clut(sd, osdwin, osdwin_state->clut);
-		osdwin_state->colorkey_blending = 0;
-		_osd_disable_color_key(sd, osdwin);
-		osdwin_state->blend = OSD_8_VID_0;
-		_osd_set_blending_factor(sd, osdwin, osdwin_state->blend);
-		osdwin_state->rec601_attenuation = 0;
-		_osd_set_rec601_attenuation(sd, osdwin,
-						     osdwin_state->
-						     rec601_attenuation);
-		if (osdwin == OSDWIN_OSD1) {
-			osd->is_blinking = 0;
-			osd->blink = BLINK_X1;
-		}
-		break;
-	case WIN_VID0:
-	case WIN_VID1:
-		cfg->pixfmt = osd->yc_pixfmt;
-		_osd_set_layer_config(sd, layer, cfg);
-		break;
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static void osd_release_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (!win->is_allocated) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return;
-	}
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-	osd_init_layer(sd, layer);
-	spin_lock_irqsave(&osd->lock, flags);
-
-	win->is_allocated = 0;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-}
-
-static int osd_request_layer(struct osd_state *sd, enum osd_layer layer)
-{
-	struct osd_state *osd = sd;
-	struct osd_window_state *win = &osd->win[layer];
-	unsigned long flags;
-
-	spin_lock_irqsave(&osd->lock, flags);
-
-	if (win->is_allocated) {
-		spin_unlock_irqrestore(&osd->lock, flags);
-		return -1;
-	}
-	win->is_allocated = 1;
-
-	spin_unlock_irqrestore(&osd->lock, flags);
-
-	return 0;
-}
-
-static void _osd_init(struct osd_state *sd)
-{
-	osd_write(sd, 0, OSD_MODE);
-	osd_write(sd, 0, OSD_VIDWINMD);
-	osd_write(sd, 0, OSD_OSDWIN0MD);
-	osd_write(sd, 0, OSD_OSDWIN1MD);
-	osd_write(sd, 0, OSD_RECTCUR);
-	osd_write(sd, 0, OSD_MISCCTL);
-	if (sd->vpbe_type == VPBE_VERSION_3) {
-		osd_write(sd, 0, OSD_VBNDRY);
-		osd_write(sd, 0, OSD_EXTMODE);
-		osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL);
-	}
-}
-
-static void osd_set_left_margin(struct osd_state *sd, u32 val)
-{
-	osd_write(sd, val, OSD_BASEPX);
-}
-
-static void osd_set_top_margin(struct osd_state *sd, u32 val)
-{
-	osd_write(sd, val, OSD_BASEPY);
-}
-
-static int osd_initialize(struct osd_state *osd)
-{
-	if (osd == NULL)
-		return -ENODEV;
-	_osd_init(osd);
-
-	/* set default Cb/Cr order */
-	osd->yc_pixfmt = PIXFMT_YCBCRI;
-
-	if (osd->vpbe_type == VPBE_VERSION_3) {
-		/*
-		 * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0
-		 * on the DM6446, so make ROM_CLUT1 the default on the DM355.
-		 */
-		osd->rom_clut = ROM_CLUT1;
-	}
-
-	_osd_set_field_inversion(osd, osd->field_inversion);
-	_osd_set_rom_clut(osd, osd->rom_clut);
-
-	osd_init_layer(osd, WIN_OSD0);
-	osd_init_layer(osd, WIN_VID0);
-	osd_init_layer(osd, WIN_OSD1);
-	osd_init_layer(osd, WIN_VID1);
-
-	return 0;
-}
-
-static const struct vpbe_osd_ops osd_ops = {
-	.initialize = osd_initialize,
-	.request_layer = osd_request_layer,
-	.release_layer = osd_release_layer,
-	.enable_layer = osd_enable_layer,
-	.disable_layer = osd_disable_layer,
-	.set_layer_config = osd_set_layer_config,
-	.get_layer_config = osd_get_layer_config,
-	.start_layer = osd_start_layer,
-	.set_left_margin = osd_set_left_margin,
-	.set_top_margin = osd_set_top_margin,
-};
-
-static int osd_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *pdev_id;
-	struct osd_state *osd;
-	struct resource *res;
-
-	pdev_id = platform_get_device_id(pdev);
-	if (!pdev_id)
-		return -EINVAL;
-
-	osd = devm_kzalloc(&pdev->dev, sizeof(struct osd_state), GFP_KERNEL);
-	if (osd == NULL)
-		return -ENOMEM;
-
-
-	osd->dev = &pdev->dev;
-	osd->vpbe_type = pdev_id->driver_data;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	osd->osd_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(osd->osd_base))
-		return PTR_ERR(osd->osd_base);
-
-	osd->osd_base_phys = res->start;
-	osd->osd_size = resource_size(res);
-	spin_lock_init(&osd->lock);
-	osd->ops = osd_ops;
-	platform_set_drvdata(pdev, osd);
-	dev_notice(osd->dev, "OSD sub device probe success\n");
-
-	return 0;
-}
-
-static int osd_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static struct platform_driver osd_driver = {
-	.probe		= osd_probe,
-	.remove		= osd_remove,
-	.driver		= {
-		.name	= MODULE_NAME,
-	},
-	.id_table	= vpbe_osd_devtype
-};
-
-module_platform_driver(osd_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("DaVinci OSD Manager Driver");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/ti/davinci/vpbe_osd_regs.h b/drivers/media/platform/ti/davinci/vpbe_osd_regs.h
deleted file mode 100644
index cecd5991d4c5..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe_osd_regs.h
+++ /dev/null
@@ -1,352 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2006-2010 Texas Instruments Inc
- */
-#ifndef _VPBE_OSD_REGS_H
-#define _VPBE_OSD_REGS_H
-
-/* VPBE Global Registers */
-#define VPBE_PID				0x0
-#define VPBE_PCR				0x4
-
-/* VPSS CLock Registers */
-#define VPSSCLK_PID				0x00
-#define VPSSCLK_CLKCTRL				0x04
-
-/* VPSS Buffer Logic Registers */
-#define VPSSBL_PID				0x00
-#define VPSSBL_PCR				0x04
-#define VPSSBL_BCR				0x08
-#define VPSSBL_INTSTAT				0x0C
-#define VPSSBL_INTSEL				0x10
-#define VPSSBL_EVTSEL				0x14
-#define VPSSBL_MEMCTRL				0x18
-#define VPSSBL_CCDCMUX				0x1C
-
-/* DM365 ISP5 system configuration */
-#define ISP5_PID				0x0
-#define ISP5_PCCR				0x4
-#define ISP5_BCR				0x8
-#define ISP5_INTSTAT				0xC
-#define ISP5_INTSEL1				0x10
-#define ISP5_INTSEL2				0x14
-#define ISP5_INTSEL3				0x18
-#define ISP5_EVTSEL				0x1c
-#define ISP5_CCDCMUX				0x20
-
-/* VPBE On-Screen Display Subsystem Registers (OSD) */
-#define OSD_MODE				0x00
-#define OSD_VIDWINMD				0x04
-#define OSD_OSDWIN0MD				0x08
-#define OSD_OSDWIN1MD				0x0C
-#define OSD_OSDATRMD				0x0C
-#define OSD_RECTCUR				0x10
-#define OSD_VIDWIN0OFST				0x18
-#define OSD_VIDWIN1OFST				0x1C
-#define OSD_OSDWIN0OFST				0x20
-#define OSD_OSDWIN1OFST				0x24
-#define OSD_VIDWINADH				0x28
-#define OSD_VIDWIN0ADL				0x2C
-#define OSD_VIDWIN0ADR				0x2C
-#define OSD_VIDWIN1ADL				0x30
-#define OSD_VIDWIN1ADR				0x30
-#define OSD_OSDWINADH				0x34
-#define OSD_OSDWIN0ADL				0x38
-#define OSD_OSDWIN0ADR				0x38
-#define OSD_OSDWIN1ADL				0x3C
-#define OSD_OSDWIN1ADR				0x3C
-#define OSD_BASEPX				0x40
-#define OSD_BASEPY				0x44
-#define OSD_VIDWIN0XP				0x48
-#define OSD_VIDWIN0YP				0x4C
-#define OSD_VIDWIN0XL				0x50
-#define OSD_VIDWIN0YL				0x54
-#define OSD_VIDWIN1XP				0x58
-#define OSD_VIDWIN1YP				0x5C
-#define OSD_VIDWIN1XL				0x60
-#define OSD_VIDWIN1YL				0x64
-#define OSD_OSDWIN0XP				0x68
-#define OSD_OSDWIN0YP				0x6C
-#define OSD_OSDWIN0XL				0x70
-#define OSD_OSDWIN0YL				0x74
-#define OSD_OSDWIN1XP				0x78
-#define OSD_OSDWIN1YP				0x7C
-#define OSD_OSDWIN1XL				0x80
-#define OSD_OSDWIN1YL				0x84
-#define OSD_CURXP				0x88
-#define OSD_CURYP				0x8C
-#define OSD_CURXL				0x90
-#define OSD_CURYL				0x94
-#define OSD_W0BMP01				0xA0
-#define OSD_W0BMP23				0xA4
-#define OSD_W0BMP45				0xA8
-#define OSD_W0BMP67				0xAC
-#define OSD_W0BMP89				0xB0
-#define OSD_W0BMPAB				0xB4
-#define OSD_W0BMPCD				0xB8
-#define OSD_W0BMPEF				0xBC
-#define OSD_W1BMP01				0xC0
-#define OSD_W1BMP23				0xC4
-#define OSD_W1BMP45				0xC8
-#define OSD_W1BMP67				0xCC
-#define OSD_W1BMP89				0xD0
-#define OSD_W1BMPAB				0xD4
-#define OSD_W1BMPCD				0xD8
-#define OSD_W1BMPEF				0xDC
-#define OSD_VBNDRY				0xE0
-#define OSD_EXTMODE				0xE4
-#define OSD_MISCCTL				0xE8
-#define OSD_CLUTRAMYCB				0xEC
-#define OSD_CLUTRAMCR				0xF0
-#define OSD_TRANSPVAL				0xF4
-#define OSD_TRANSPVALL				0xF4
-#define OSD_TRANSPVALU				0xF8
-#define OSD_TRANSPBMPIDX			0xFC
-#define OSD_PPVWIN0ADR				0xFC
-
-/* bit definitions */
-#define VPBE_PCR_VENC_DIV			(1 << 1)
-#define VPBE_PCR_CLK_OFF			(1 << 0)
-
-#define VPSSBL_INTSTAT_HSSIINT			(1 << 14)
-#define VPSSBL_INTSTAT_CFALDINT			(1 << 13)
-#define VPSSBL_INTSTAT_IPIPE_INT5		(1 << 12)
-#define VPSSBL_INTSTAT_IPIPE_INT4		(1 << 11)
-#define VPSSBL_INTSTAT_IPIPE_INT3		(1 << 10)
-#define VPSSBL_INTSTAT_IPIPE_INT2		(1 << 9)
-#define VPSSBL_INTSTAT_IPIPE_INT1		(1 << 8)
-#define VPSSBL_INTSTAT_IPIPE_INT0		(1 << 7)
-#define VPSSBL_INTSTAT_IPIPEIFINT		(1 << 6)
-#define VPSSBL_INTSTAT_OSDINT			(1 << 5)
-#define VPSSBL_INTSTAT_VENCINT			(1 << 4)
-#define VPSSBL_INTSTAT_H3AINT			(1 << 3)
-#define VPSSBL_INTSTAT_CCDC_VDINT2		(1 << 2)
-#define VPSSBL_INTSTAT_CCDC_VDINT1		(1 << 1)
-#define VPSSBL_INTSTAT_CCDC_VDINT0		(1 << 0)
-
-/* DM365 ISP5 bit definitions */
-#define ISP5_INTSTAT_VENCINT			(1 << 21)
-#define ISP5_INTSTAT_OSDINT			(1 << 20)
-
-/* VMOD TVTYP options for HDMD=0 */
-#define SDTV_NTSC				0
-#define SDTV_PAL				1
-/* VMOD TVTYP options for HDMD=1 */
-#define HDTV_525P				0
-#define HDTV_625P				1
-#define HDTV_1080I				2
-#define HDTV_720P				3
-
-#define OSD_MODE_CS				(1 << 15)
-#define OSD_MODE_OVRSZ				(1 << 14)
-#define OSD_MODE_OHRSZ				(1 << 13)
-#define OSD_MODE_EF				(1 << 12)
-#define OSD_MODE_VVRSZ				(1 << 11)
-#define OSD_MODE_VHRSZ				(1 << 10)
-#define OSD_MODE_FSINV				(1 << 9)
-#define OSD_MODE_BCLUT				(1 << 8)
-#define OSD_MODE_CABG_SHIFT			0
-#define OSD_MODE_CABG				(0xff << 0)
-
-#define OSD_VIDWINMD_VFINV			(1 << 15)
-#define OSD_VIDWINMD_V1EFC			(1 << 14)
-#define OSD_VIDWINMD_VHZ1_SHIFT			12
-#define OSD_VIDWINMD_VHZ1			(3 << 12)
-#define OSD_VIDWINMD_VVZ1_SHIFT			10
-#define OSD_VIDWINMD_VVZ1			(3 << 10)
-#define OSD_VIDWINMD_VFF1			(1 << 9)
-#define OSD_VIDWINMD_ACT1			(1 << 8)
-#define OSD_VIDWINMD_V0EFC			(1 << 6)
-#define OSD_VIDWINMD_VHZ0_SHIFT			4
-#define OSD_VIDWINMD_VHZ0			(3 << 4)
-#define OSD_VIDWINMD_VVZ0_SHIFT			2
-#define OSD_VIDWINMD_VVZ0			(3 << 2)
-#define OSD_VIDWINMD_VFF0			(1 << 1)
-#define OSD_VIDWINMD_ACT0			(1 << 0)
-
-#define OSD_OSDWIN0MD_ATN0E			(1 << 14)
-#define OSD_OSDWIN0MD_RGB0E			(1 << 13)
-#define OSD_OSDWIN0MD_BMP0MD_SHIFT		13
-#define OSD_OSDWIN0MD_BMP0MD			(3 << 13)
-#define OSD_OSDWIN0MD_CLUTS0			(1 << 12)
-#define OSD_OSDWIN0MD_OHZ0_SHIFT		10
-#define OSD_OSDWIN0MD_OHZ0			(3 << 10)
-#define OSD_OSDWIN0MD_OVZ0_SHIFT		8
-#define OSD_OSDWIN0MD_OVZ0			(3 << 8)
-#define OSD_OSDWIN0MD_BMW0_SHIFT		6
-#define OSD_OSDWIN0MD_BMW0			(3 << 6)
-#define OSD_OSDWIN0MD_BLND0_SHIFT		3
-#define OSD_OSDWIN0MD_BLND0			(7 << 3)
-#define OSD_OSDWIN0MD_TE0			(1 << 2)
-#define OSD_OSDWIN0MD_OFF0			(1 << 1)
-#define OSD_OSDWIN0MD_OACT0			(1 << 0)
-
-#define OSD_OSDWIN1MD_OASW			(1 << 15)
-#define OSD_OSDWIN1MD_ATN1E			(1 << 14)
-#define OSD_OSDWIN1MD_RGB1E			(1 << 13)
-#define OSD_OSDWIN1MD_BMP1MD_SHIFT		13
-#define OSD_OSDWIN1MD_BMP1MD			(3 << 13)
-#define OSD_OSDWIN1MD_CLUTS1			(1 << 12)
-#define OSD_OSDWIN1MD_OHZ1_SHIFT		10
-#define OSD_OSDWIN1MD_OHZ1			(3 << 10)
-#define OSD_OSDWIN1MD_OVZ1_SHIFT		8
-#define OSD_OSDWIN1MD_OVZ1			(3 << 8)
-#define OSD_OSDWIN1MD_BMW1_SHIFT		6
-#define OSD_OSDWIN1MD_BMW1			(3 << 6)
-#define OSD_OSDWIN1MD_BLND1_SHIFT		3
-#define OSD_OSDWIN1MD_BLND1			(7 << 3)
-#define OSD_OSDWIN1MD_TE1			(1 << 2)
-#define OSD_OSDWIN1MD_OFF1			(1 << 1)
-#define OSD_OSDWIN1MD_OACT1			(1 << 0)
-
-#define OSD_OSDATRMD_OASW			(1 << 15)
-#define OSD_OSDATRMD_OHZA_SHIFT			10
-#define OSD_OSDATRMD_OHZA			(3 << 10)
-#define OSD_OSDATRMD_OVZA_SHIFT			8
-#define OSD_OSDATRMD_OVZA			(3 << 8)
-#define OSD_OSDATRMD_BLNKINT_SHIFT		6
-#define OSD_OSDATRMD_BLNKINT			(3 << 6)
-#define OSD_OSDATRMD_OFFA			(1 << 1)
-#define OSD_OSDATRMD_BLNK			(1 << 0)
-
-#define OSD_RECTCUR_RCAD_SHIFT			8
-#define OSD_RECTCUR_RCAD			(0xff << 8)
-#define OSD_RECTCUR_CLUTSR			(1 << 7)
-#define OSD_RECTCUR_RCHW_SHIFT			4
-#define OSD_RECTCUR_RCHW			(7 << 4)
-#define OSD_RECTCUR_RCVW_SHIFT			1
-#define OSD_RECTCUR_RCVW			(7 << 1)
-#define OSD_RECTCUR_RCACT			(1 << 0)
-
-#define OSD_VIDWIN0OFST_V0LO			(0x1ff << 0)
-
-#define OSD_VIDWIN1OFST_V1LO			(0x1ff << 0)
-
-#define OSD_OSDWIN0OFST_O0LO			(0x1ff << 0)
-
-#define OSD_OSDWIN1OFST_O1LO			(0x1ff << 0)
-
-#define OSD_WINOFST_AH_SHIFT			9
-
-#define OSD_VIDWIN0OFST_V0AH			(0xf << 9)
-#define OSD_VIDWIN1OFST_V1AH			(0xf << 9)
-#define OSD_OSDWIN0OFST_O0AH			(0xf << 9)
-#define OSD_OSDWIN1OFST_O1AH			(0xf << 9)
-
-#define OSD_VIDWINADH_V1AH_SHIFT		8
-#define OSD_VIDWINADH_V1AH			(0x7f << 8)
-#define OSD_VIDWINADH_V0AH_SHIFT		0
-#define OSD_VIDWINADH_V0AH			(0x7f << 0)
-
-#define OSD_VIDWIN0ADL_V0AL			(0xffff << 0)
-
-#define OSD_VIDWIN1ADL_V1AL			(0xffff << 0)
-
-#define OSD_OSDWINADH_O1AH_SHIFT		8
-#define OSD_OSDWINADH_O1AH			(0x7f << 8)
-#define OSD_OSDWINADH_O0AH_SHIFT		0
-#define OSD_OSDWINADH_O0AH			(0x7f << 0)
-
-#define OSD_OSDWIN0ADL_O0AL			(0xffff << 0)
-
-#define OSD_OSDWIN1ADL_O1AL			(0xffff << 0)
-
-#define OSD_BASEPX_BPX				(0x3ff << 0)
-
-#define OSD_BASEPY_BPY				(0x1ff << 0)
-
-#define OSD_VIDWIN0XP_V0X			(0x7ff << 0)
-
-#define OSD_VIDWIN0YP_V0Y			(0x7ff << 0)
-
-#define OSD_VIDWIN0XL_V0W			(0x7ff << 0)
-
-#define OSD_VIDWIN0YL_V0H			(0x7ff << 0)
-
-#define OSD_VIDWIN1XP_V1X			(0x7ff << 0)
-
-#define OSD_VIDWIN1YP_V1Y			(0x7ff << 0)
-
-#define OSD_VIDWIN1XL_V1W			(0x7ff << 0)
-
-#define OSD_VIDWIN1YL_V1H			(0x7ff << 0)
-
-#define OSD_OSDWIN0XP_W0X			(0x7ff << 0)
-
-#define OSD_OSDWIN0YP_W0Y			(0x7ff << 0)
-
-#define OSD_OSDWIN0XL_W0W			(0x7ff << 0)
-
-#define OSD_OSDWIN0YL_W0H			(0x7ff << 0)
-
-#define OSD_OSDWIN1XP_W1X			(0x7ff << 0)
-
-#define OSD_OSDWIN1YP_W1Y			(0x7ff << 0)
-
-#define OSD_OSDWIN1XL_W1W			(0x7ff << 0)
-
-#define OSD_OSDWIN1YL_W1H			(0x7ff << 0)
-
-#define OSD_CURXP_RCSX				(0x7ff << 0)
-
-#define OSD_CURYP_RCSY				(0x7ff << 0)
-
-#define OSD_CURXL_RCSW				(0x7ff << 0)
-
-#define OSD_CURYL_RCSH				(0x7ff << 0)
-
-#define OSD_EXTMODE_EXPMDSEL			(1 << 15)
-#define OSD_EXTMODE_SCRNHEXP_SHIFT		13
-#define OSD_EXTMODE_SCRNHEXP			(3 << 13)
-#define OSD_EXTMODE_SCRNVEXP			(1 << 12)
-#define OSD_EXTMODE_OSD1BLDCHR			(1 << 11)
-#define OSD_EXTMODE_OSD0BLDCHR			(1 << 10)
-#define OSD_EXTMODE_ATNOSD1EN			(1 << 9)
-#define OSD_EXTMODE_ATNOSD0EN			(1 << 8)
-#define OSD_EXTMODE_OSDHRSZ15			(1 << 7)
-#define OSD_EXTMODE_VIDHRSZ15			(1 << 6)
-#define OSD_EXTMODE_ZMFILV1HEN			(1 << 5)
-#define OSD_EXTMODE_ZMFILV1VEN			(1 << 4)
-#define OSD_EXTMODE_ZMFILV0HEN			(1 << 3)
-#define OSD_EXTMODE_ZMFILV0VEN			(1 << 2)
-#define OSD_EXTMODE_EXPFILHEN			(1 << 1)
-#define OSD_EXTMODE_EXPFILVEN			(1 << 0)
-
-#define OSD_MISCCTL_BLDSEL			(1 << 15)
-#define OSD_MISCCTL_S420D			(1 << 14)
-#define OSD_MISCCTL_BMAPT			(1 << 13)
-#define OSD_MISCCTL_DM365M			(1 << 12)
-#define OSD_MISCCTL_RGBEN			(1 << 7)
-#define OSD_MISCCTL_RGBWIN			(1 << 6)
-#define OSD_MISCCTL_DMANG			(1 << 6)
-#define OSD_MISCCTL_TMON			(1 << 5)
-#define OSD_MISCCTL_RSEL			(1 << 4)
-#define OSD_MISCCTL_CPBSY			(1 << 3)
-#define OSD_MISCCTL_PPSW			(1 << 2)
-#define OSD_MISCCTL_PPRV			(1 << 1)
-
-#define OSD_CLUTRAMYCB_Y_SHIFT			8
-#define OSD_CLUTRAMYCB_Y			(0xff << 8)
-#define OSD_CLUTRAMYCB_CB_SHIFT			0
-#define OSD_CLUTRAMYCB_CB			(0xff << 0)
-
-#define OSD_CLUTRAMCR_CR_SHIFT			8
-#define OSD_CLUTRAMCR_CR			(0xff << 8)
-#define OSD_CLUTRAMCR_CADDR_SHIFT		0
-#define OSD_CLUTRAMCR_CADDR			(0xff << 0)
-
-#define OSD_TRANSPVAL_RGBTRANS			(0xffff << 0)
-
-#define OSD_TRANSPVALL_RGBL			(0xffff << 0)
-
-#define OSD_TRANSPVALU_Y_SHIFT			8
-#define OSD_TRANSPVALU_Y			(0xff << 8)
-#define OSD_TRANSPVALU_RGBU_SHIFT		0
-#define OSD_TRANSPVALU_RGBU			(0xff << 0)
-
-#define OSD_TRANSPBMPIDX_BMP1_SHIFT		8
-#define OSD_TRANSPBMPIDX_BMP1			(0xff << 8)
-#define OSD_TRANSPBMPIDX_BMP0_SHIFT		0
-#define OSD_TRANSPBMPIDX_BMP0			0xff
-
-#endif				/* _DAVINCI_VPBE_H_ */
diff --git a/drivers/media/platform/ti/davinci/vpbe_venc.c b/drivers/media/platform/ti/davinci/vpbe_venc.c
deleted file mode 100644
index 4c8e31de12b1..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe_venc.c
+++ /dev/null
@@ -1,676 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#include <linux/module.h>
-#include <linux/mod_devicetable.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/videodev2.h>
-#include <linux/slab.h>
-
-#include <linux/platform_data/i2c-davinci.h>
-
-#include <linux/io.h>
-
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpss.h>
-#include <media/v4l2-device.h>
-
-#include "vpbe_venc_regs.h"
-
-#define MODULE_NAME	"davinci-vpbe-venc"
-
-static const struct platform_device_id vpbe_venc_devtype[] = {
-	{
-		.name = DM644X_VPBE_VENC_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_1,
-	}, {
-		.name = DM365_VPBE_VENC_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_2,
-	}, {
-		.name = DM355_VPBE_VENC_SUBDEV_NAME,
-		.driver_data = VPBE_VERSION_3,
-	},
-	{
-		/* sentinel */
-	}
-};
-
-MODULE_DEVICE_TABLE(platform, vpbe_venc_devtype);
-
-static int debug = 2;
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Debug level 0-2");
-
-struct venc_state {
-	struct v4l2_subdev sd;
-	struct venc_callback *callback;
-	struct venc_platform_data *pdata;
-	struct device *pdev;
-	u32 output;
-	v4l2_std_id std;
-	spinlock_t lock;
-	void __iomem *venc_base;
-	void __iomem *vdaccfg_reg;
-	enum vpbe_version venc_type;
-};
-
-static inline struct venc_state *to_state(struct v4l2_subdev *sd)
-{
-	return container_of(sd, struct venc_state, sd);
-}
-
-static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset)
-{
-	struct venc_state *venc = to_state(sd);
-
-	return readl(venc->venc_base + offset);
-}
-
-static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val)
-{
-	struct venc_state *venc = to_state(sd);
-
-	writel(val, (venc->venc_base + offset));
-
-	return val;
-}
-
-static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset,
-				 u32 val, u32 mask)
-{
-	u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask);
-
-	venc_write(sd, offset, new_val);
-
-	return new_val;
-}
-
-static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val)
-{
-	struct venc_state *venc = to_state(sd);
-
-	writel(val, venc->vdaccfg_reg);
-
-	val = readl(venc->vdaccfg_reg);
-
-	return val;
-}
-
-#define VDAC_COMPONENT	0x543
-#define VDAC_S_VIDEO	0x210
-/* This function sets the dac of the VPBE for various outputs
- */
-static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index)
-{
-	switch (out_index) {
-	case 0:
-		v4l2_dbg(debug, 1, sd, "Setting output to Composite\n");
-		venc_write(sd, VENC_DACSEL, 0);
-		break;
-	case 1:
-		v4l2_dbg(debug, 1, sd, "Setting output to Component\n");
-		venc_write(sd, VENC_DACSEL, VDAC_COMPONENT);
-		break;
-	case 2:
-		v4l2_dbg(debug, 1, sd, "Setting output to S-video\n");
-		venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable)
-{
-	struct venc_state *venc = to_state(sd);
-
-	v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n");
-
-	if (benable) {
-		venc_write(sd, VENC_VMOD, 0);
-		venc_write(sd, VENC_CVBS, 0);
-		venc_write(sd, VENC_LCDOUT, 0);
-		venc_write(sd, VENC_HSPLS, 0);
-		venc_write(sd, VENC_HSTART, 0);
-		venc_write(sd, VENC_HVALID, 0);
-		venc_write(sd, VENC_HINT, 0);
-		venc_write(sd, VENC_VSPLS, 0);
-		venc_write(sd, VENC_VSTART, 0);
-		venc_write(sd, VENC_VVALID, 0);
-		venc_write(sd, VENC_VINT, 0);
-		venc_write(sd, VENC_YCCCTL, 0);
-		venc_write(sd, VENC_DACSEL, 0);
-
-	} else {
-		venc_write(sd, VENC_VMOD, 0);
-		/* disable VCLK output pin enable */
-		venc_write(sd, VENC_VIDCTL, 0x141);
-
-		/* Disable output sync pins */
-		venc_write(sd, VENC_SYNCCTL, 0);
-
-		/* Disable DCLOCK */
-		venc_write(sd, VENC_DCLKCTL, 0);
-		venc_write(sd, VENC_DRGBX1, 0x0000057C);
-
-		/* Disable LCD output control (accepting default polarity) */
-		venc_write(sd, VENC_LCDOUT, 0);
-		if (venc->venc_type != VPBE_VERSION_3)
-			venc_write(sd, VENC_CMPNT, 0x100);
-		venc_write(sd, VENC_HSPLS, 0);
-		venc_write(sd, VENC_HINT, 0);
-		venc_write(sd, VENC_HSTART, 0);
-		venc_write(sd, VENC_HVALID, 0);
-
-		venc_write(sd, VENC_VSPLS, 0);
-		venc_write(sd, VENC_VINT, 0);
-		venc_write(sd, VENC_VSTART, 0);
-		venc_write(sd, VENC_VVALID, 0);
-
-		venc_write(sd, VENC_HSDLY, 0);
-		venc_write(sd, VENC_VSDLY, 0);
-
-		venc_write(sd, VENC_YCCCTL, 0);
-		venc_write(sd, VENC_VSTARTA, 0);
-
-		/* Set OSD clock and OSD Sync Adavance registers */
-		venc_write(sd, VENC_OSDCLK0, 1);
-		venc_write(sd, VENC_OSDCLK1, 2);
-	}
-}
-
-static void
-venc_enable_vpss_clock(int venc_type,
-		       enum vpbe_enc_timings_type type,
-		       unsigned int pclock)
-{
-	if (venc_type == VPBE_VERSION_1)
-		return;
-
-	if (venc_type == VPBE_VERSION_2 && (type == VPBE_ENC_STD || (type ==
-	    VPBE_ENC_DV_TIMINGS && pclock <= 27000000))) {
-		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
-		vpss_enable_clock(VPSS_VPBE_CLOCK, 1);
-		return;
-	}
-
-	if (venc_type == VPBE_VERSION_3 && type == VPBE_ENC_STD)
-		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0);
-}
-
-#define VDAC_CONFIG_SD_V3	0x0E21A6B6
-#define VDAC_CONFIG_SD_V2	0x081141CF
-/*
- * setting NTSC mode
- */
-static int venc_set_ntsc(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n");
-
-	/* Setup clock at VPSS & VENC for SD */
-	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
-	if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_525_60);
-	venc_enabledigitaloutput(sd, 0);
-
-	if (venc->venc_type == VPBE_VERSION_3) {
-		venc_write(sd, VENC_CLKCTL, 0x01);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
-	} else if (venc->venc_type == VPBE_VERSION_2) {
-		venc_write(sd, VENC_CLKCTL, 0x01);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
-	} else {
-		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
-		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
-		/* Set REC656 Mode */
-		venc_write(sd, VENC_YCCCTL, 0x1);
-		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-			VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
-	venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT),
-			VENC_VMOD_TVTYP);
-	venc_write(sd, VENC_DACTST, 0x0);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * setting PAL mode
- */
-static int venc_set_pal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-
-	v4l2_dbg(debug, 2, sd, "venc_set_pal\n");
-
-	/* Setup clock at VPSS & VENC for SD */
-	vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1);
-	if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_625_50);
-	venc_enabledigitaloutput(sd, 0);
-
-	if (venc->venc_type == VPBE_VERSION_3) {
-		venc_write(sd, VENC_CLKCTL, 0x1);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V3);
-	} else if (venc->venc_type == VPBE_VERSION_2) {
-		venc_write(sd, VENC_CLKCTL, 0x1);
-		venc_write(sd, VENC_VIDCTL, 0);
-		vdaccfg_write(sd, VDAC_CONFIG_SD_V2);
-	} else {
-		/* to set VENC CLK DIV to 1 - final clock is 54 MHz */
-		venc_modify(sd, VENC_VIDCTL, 0, 1 << 1);
-		/* Set REC656 Mode */
-		venc_write(sd, VENC_YCCCTL, 0x1);
-	}
-
-	venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT,
-			VENC_SYNCCTL_OVD);
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD,
-			(1 << VENC_VMOD_VIE_SHIFT),
-			VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD,
-			(0 << VENC_VMOD_VMD), VENC_VMOD_VMD);
-	venc_modify(sd, VENC_VMOD,
-			(1 << VENC_VMOD_TVTYP_SHIFT),
-			VENC_VMOD_TVTYP);
-	venc_write(sd, VENC_DACTST, 0x0);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-#define VDAC_CONFIG_HD_V2	0x081141EF
-/*
- * venc_set_480p59_94
- *
- * This function configures the video encoder to EDTV(525p) component setting.
- */
-static int venc_set_480p59_94(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n");
-	if (venc->venc_type != VPBE_VERSION_1 &&
-	    venc->venc_type != VPBE_VERSION_2)
-		return -EINVAL;
-
-	/* Setup clock at VPSS & VENC for SD */
-	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000);
-	venc_enabledigitaloutput(sd, 0);
-
-	if (venc->venc_type == VPBE_VERSION_2)
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	if (venc->venc_type == VPBE_VERSION_1) {
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
-			    VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
-			    VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
-		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
-
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * venc_set_625p
- *
- * This function configures the video encoder to HDTV(625p) component setting
- */
-static int venc_set_576p50(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	v4l2_dbg(debug, 2, sd, "venc_set_576p50\n");
-
-	if (venc->venc_type != VPBE_VERSION_1 &&
-	    venc->venc_type != VPBE_VERSION_2)
-		return -EINVAL;
-	/* Setup clock at VPSS & VENC for SD */
-	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000);
-	venc_enabledigitaloutput(sd, 0);
-
-	if (venc->venc_type == VPBE_VERSION_2)
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	if (venc->venc_type == VPBE_VERSION_1) {
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ,
-			    VENC_VDPRO_DAFRQ);
-		venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS,
-			    VENC_VDPRO_DAUPS);
-	}
-
-	venc_write(sd, VENC_VMOD, 0);
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 <<
-		    VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-
-	return 0;
-}
-
-/*
- * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only
- */
-static int venc_set_720p60_internal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000);
-	venc_enabledigitaloutput(sd, 0);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-	venc_write(sd, VENC_VMOD, 0);
-	/* DM365 component HD mode */
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-	    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-	venc_write(sd, VENC_XHINTVL, 0);
-	return 0;
-}
-
-/*
- * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only
- */
-static int venc_set_1080i30_internal(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	struct venc_platform_data *pdata = venc->pdata;
-
-	if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0)
-		return -EINVAL;
-
-	venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000);
-	venc_enabledigitaloutput(sd, 0);
-
-	venc_write(sd, VENC_OSDCLK0, 0);
-	venc_write(sd, VENC_OSDCLK1, 1);
-
-
-	venc_write(sd, VENC_VMOD, 0);
-	/* DM365 component HD mode */
-	venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT),
-		    VENC_VMOD_VIE);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD);
-	venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT),
-		    VENC_VMOD_TVTYP);
-	venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC);
-	venc_write(sd, VENC_XHINTVL, 0);
-	return 0;
-}
-
-static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm)
-{
-	v4l2_dbg(debug, 1, sd, "venc_s_std_output\n");
-
-	if (norm & V4L2_STD_525_60)
-		return venc_set_ntsc(sd);
-	else if (norm & V4L2_STD_625_50)
-		return venc_set_pal(sd);
-
-	return -EINVAL;
-}
-
-static int venc_s_dv_timings(struct v4l2_subdev *sd,
-			    struct v4l2_dv_timings *dv_timings)
-{
-	struct venc_state *venc = to_state(sd);
-	u32 height = dv_timings->bt.height;
-	int ret;
-
-	v4l2_dbg(debug, 1, sd, "venc_s_dv_timings\n");
-
-	if (height == 576)
-		return venc_set_576p50(sd);
-	else if (height == 480)
-		return venc_set_480p59_94(sd);
-	else if ((height == 720) &&
-			(venc->venc_type == VPBE_VERSION_2)) {
-		/* TBD setup internal 720p mode here */
-		ret = venc_set_720p60_internal(sd);
-		/* for DM365 VPBE, there is DAC inside */
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-		return ret;
-	} else if ((height == 1080) &&
-		(venc->venc_type == VPBE_VERSION_2)) {
-		/* TBD setup internal 1080i mode here */
-		ret = venc_set_1080i30_internal(sd);
-		/* for DM365 VPBE, there is DAC inside */
-		vdaccfg_write(sd, VDAC_CONFIG_HD_V2);
-		return ret;
-	}
-	return -EINVAL;
-}
-
-static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
-			  u32 config)
-{
-	struct venc_state *venc = to_state(sd);
-	int ret;
-
-	v4l2_dbg(debug, 1, sd, "venc_s_routing\n");
-
-	ret = venc_set_dac(sd, output);
-	if (!ret)
-		venc->output = output;
-
-	return ret;
-}
-
-static long venc_command(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
-	u32 val;
-
-	switch (cmd) {
-	case VENC_GET_FLD:
-		val = venc_read(sd, VENC_VSTAT);
-		*((int *)arg) = ((val & VENC_VSTAT_FIDST) ==
-		VENC_VSTAT_FIDST);
-		break;
-	default:
-		v4l2_err(sd, "Wrong IOCTL cmd\n");
-		break;
-	}
-
-	return 0;
-}
-
-static const struct v4l2_subdev_core_ops venc_core_ops = {
-	.command      = venc_command,
-};
-
-static const struct v4l2_subdev_video_ops venc_video_ops = {
-	.s_routing = venc_s_routing,
-	.s_std_output = venc_s_std_output,
-	.s_dv_timings = venc_s_dv_timings,
-};
-
-static const struct v4l2_subdev_ops venc_ops = {
-	.core = &venc_core_ops,
-	.video = &venc_video_ops,
-};
-
-static int venc_initialize(struct v4l2_subdev *sd)
-{
-	struct venc_state *venc = to_state(sd);
-	int ret;
-
-	/* Set default to output to composite and std to NTSC */
-	venc->output = 0;
-	venc->std = V4L2_STD_525_60;
-
-	ret = venc_s_routing(sd, 0, venc->output, 0);
-	if (ret < 0) {
-		v4l2_err(sd, "Error setting output during init\n");
-		return -EINVAL;
-	}
-
-	ret = venc_s_std_output(sd, venc->std);
-	if (ret < 0) {
-		v4l2_err(sd, "Error setting std during init\n");
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int venc_device_get(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	struct venc_state **venc = data;
-
-	if (strstr(pdev->name, "vpbe-venc") != NULL)
-		*venc = platform_get_drvdata(pdev);
-
-	return 0;
-}
-
-struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
-		const char *venc_name)
-{
-	struct venc_state *venc = NULL;
-
-	bus_for_each_dev(&platform_bus_type, NULL, &venc,
-			venc_device_get);
-	if (venc == NULL)
-		return NULL;
-
-	v4l2_subdev_init(&venc->sd, &venc_ops);
-
-	strscpy(venc->sd.name, venc_name, sizeof(venc->sd.name));
-	if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) {
-		v4l2_err(v4l2_dev,
-			"vpbe unable to register venc sub device\n");
-		return NULL;
-	}
-	if (venc_initialize(&venc->sd)) {
-		v4l2_err(v4l2_dev,
-			"vpbe venc initialization failed\n");
-		return NULL;
-	}
-
-	return &venc->sd;
-}
-EXPORT_SYMBOL(venc_sub_dev_init);
-
-static int venc_probe(struct platform_device *pdev)
-{
-	const struct platform_device_id *pdev_id;
-	struct venc_state *venc;
-
-	if (!pdev->dev.platform_data) {
-		dev_err(&pdev->dev, "No platform data for VENC sub device");
-		return -EINVAL;
-	}
-
-	pdev_id = platform_get_device_id(pdev);
-	if (!pdev_id)
-		return -EINVAL;
-
-	venc = devm_kzalloc(&pdev->dev, sizeof(struct venc_state), GFP_KERNEL);
-	if (venc == NULL)
-		return -ENOMEM;
-
-	venc->venc_type = pdev_id->driver_data;
-	venc->pdev = &pdev->dev;
-	venc->pdata = pdev->dev.platform_data;
-
-	venc->venc_base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(venc->venc_base))
-		return PTR_ERR(venc->venc_base);
-
-	if (venc->venc_type != VPBE_VERSION_1) {
-		venc->vdaccfg_reg = devm_platform_ioremap_resource(pdev, 1);
-		if (IS_ERR(venc->vdaccfg_reg))
-			return PTR_ERR(venc->vdaccfg_reg);
-	}
-	spin_lock_init(&venc->lock);
-	platform_set_drvdata(pdev, venc);
-	dev_notice(venc->pdev, "VENC sub device probe success\n");
-
-	return 0;
-}
-
-static int venc_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static struct platform_driver venc_driver = {
-	.probe		= venc_probe,
-	.remove		= venc_remove,
-	.driver		= {
-		.name	= MODULE_NAME,
-	},
-	.id_table	= vpbe_venc_devtype
-};
-
-module_platform_driver(venc_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("VPBE VENC Driver");
-MODULE_AUTHOR("Texas Instruments");
diff --git a/drivers/media/platform/ti/davinci/vpbe_venc_regs.h b/drivers/media/platform/ti/davinci/vpbe_venc_regs.h
deleted file mode 100644
index 29d8fc3af662..000000000000
--- a/drivers/media/platform/ti/davinci/vpbe_venc_regs.h
+++ /dev/null
@@ -1,165 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2006-2010 Texas Instruments Inc
- */
-#ifndef _VPBE_VENC_REGS_H
-#define _VPBE_VENC_REGS_H
-
-/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */
-#define VENC_VMOD				0x00
-#define VENC_VIDCTL				0x04
-#define VENC_VDPRO				0x08
-#define VENC_SYNCCTL				0x0C
-#define VENC_HSPLS				0x10
-#define VENC_VSPLS				0x14
-#define VENC_HINT				0x18
-#define VENC_HSTART				0x1C
-#define VENC_HVALID				0x20
-#define VENC_VINT				0x24
-#define VENC_VSTART				0x28
-#define VENC_VVALID				0x2C
-#define VENC_HSDLY				0x30
-#define VENC_VSDLY				0x34
-#define VENC_YCCCTL				0x38
-#define VENC_RGBCTL				0x3C
-#define VENC_RGBCLP				0x40
-#define VENC_LINECTL				0x44
-#define VENC_CULLLINE				0x48
-#define VENC_LCDOUT				0x4C
-#define VENC_BRTS				0x50
-#define VENC_BRTW				0x54
-#define VENC_ACCTL				0x58
-#define VENC_PWMP				0x5C
-#define VENC_PWMW				0x60
-#define VENC_DCLKCTL				0x64
-#define VENC_DCLKPTN0				0x68
-#define VENC_DCLKPTN1				0x6C
-#define VENC_DCLKPTN2				0x70
-#define VENC_DCLKPTN3				0x74
-#define VENC_DCLKPTN0A				0x78
-#define VENC_DCLKPTN1A				0x7C
-#define VENC_DCLKPTN2A				0x80
-#define VENC_DCLKPTN3A				0x84
-#define VENC_DCLKHS				0x88
-#define VENC_DCLKHSA				0x8C
-#define VENC_DCLKHR				0x90
-#define VENC_DCLKVS				0x94
-#define VENC_DCLKVR				0x98
-#define VENC_CAPCTL				0x9C
-#define VENC_CAPDO				0xA0
-#define VENC_CAPDE				0xA4
-#define VENC_ATR0				0xA8
-#define VENC_ATR1				0xAC
-#define VENC_ATR2				0xB0
-#define VENC_VSTAT				0xB8
-#define VENC_RAMADR				0xBC
-#define VENC_RAMPORT				0xC0
-#define VENC_DACTST				0xC4
-#define VENC_YCOLVL				0xC8
-#define VENC_SCPROG				0xCC
-#define VENC_CVBS				0xDC
-#define VENC_CMPNT				0xE0
-#define VENC_ETMG0				0xE4
-#define VENC_ETMG1				0xE8
-#define VENC_ETMG2				0xEC
-#define VENC_ETMG3				0xF0
-#define VENC_DACSEL				0xF4
-#define VENC_ARGBX0				0x100
-#define VENC_ARGBX1				0x104
-#define VENC_ARGBX2				0x108
-#define VENC_ARGBX3				0x10C
-#define VENC_ARGBX4				0x110
-#define VENC_DRGBX0				0x114
-#define VENC_DRGBX1				0x118
-#define VENC_DRGBX2				0x11C
-#define VENC_DRGBX3				0x120
-#define VENC_DRGBX4				0x124
-#define VENC_VSTARTA				0x128
-#define VENC_OSDCLK0				0x12C
-#define VENC_OSDCLK1				0x130
-#define VENC_HVLDCL0				0x134
-#define VENC_HVLDCL1				0x138
-#define VENC_OSDHADV				0x13C
-#define VENC_CLKCTL				0x140
-#define VENC_GAMCTL				0x144
-#define VENC_XHINTVL				0x174
-
-/* bit definitions */
-#define VPBE_PCR_VENC_DIV			(1 << 1)
-#define VPBE_PCR_CLK_OFF			(1 << 0)
-
-#define VENC_VMOD_VDMD_SHIFT			12
-#define VENC_VMOD_VDMD_YCBCR16			0
-#define VENC_VMOD_VDMD_YCBCR8			1
-#define VENC_VMOD_VDMD_RGB666			2
-#define VENC_VMOD_VDMD_RGB8			3
-#define VENC_VMOD_VDMD_EPSON			4
-#define VENC_VMOD_VDMD_CASIO			5
-#define VENC_VMOD_VDMD_UDISPQVGA		6
-#define VENC_VMOD_VDMD_STNLCD			7
-#define VENC_VMOD_VIE_SHIFT			1
-#define VENC_VMOD_VDMD				(7 << 12)
-#define VENC_VMOD_ITLCL				(1 << 11)
-#define VENC_VMOD_ITLC				(1 << 10)
-#define VENC_VMOD_NSIT				(1 << 9)
-#define VENC_VMOD_HDMD				(1 << 8)
-#define VENC_VMOD_TVTYP_SHIFT			6
-#define VENC_VMOD_TVTYP				(3 << 6)
-#define VENC_VMOD_SLAVE				(1 << 5)
-#define VENC_VMOD_VMD				(1 << 4)
-#define VENC_VMOD_BLNK				(1 << 3)
-#define VENC_VMOD_VIE				(1 << 1)
-#define VENC_VMOD_VENC				(1 << 0)
-
-/* VMOD TVTYP options for HDMD=0 */
-#define SDTV_NTSC				0
-#define SDTV_PAL				1
-/* VMOD TVTYP options for HDMD=1 */
-#define HDTV_525P				0
-#define HDTV_625P				1
-#define HDTV_1080I				2
-#define HDTV_720P				3
-
-#define VENC_VIDCTL_VCLKP			(1 << 14)
-#define VENC_VIDCTL_VCLKE_SHIFT			13
-#define VENC_VIDCTL_VCLKE			(1 << 13)
-#define VENC_VIDCTL_VCLKZ_SHIFT			12
-#define VENC_VIDCTL_VCLKZ			(1 << 12)
-#define VENC_VIDCTL_SYDIR_SHIFT			8
-#define VENC_VIDCTL_SYDIR			(1 << 8)
-#define VENC_VIDCTL_DOMD_SHIFT			4
-#define VENC_VIDCTL_DOMD			(3 << 4)
-#define VENC_VIDCTL_YCDIR_SHIFT			0
-#define VENC_VIDCTL_YCDIR			(1 << 0)
-
-#define VENC_VDPRO_ATYCC_SHIFT			5
-#define VENC_VDPRO_ATYCC			(1 << 5)
-#define VENC_VDPRO_ATCOM_SHIFT			4
-#define VENC_VDPRO_ATCOM			(1 << 4)
-#define VENC_VDPRO_DAFRQ			(1 << 3)
-#define VENC_VDPRO_DAUPS			(1 << 2)
-#define VENC_VDPRO_CUPS				(1 << 1)
-#define VENC_VDPRO_YUPS				(1 << 0)
-
-#define VENC_SYNCCTL_VPL_SHIFT			3
-#define VENC_SYNCCTL_VPL			(1 << 3)
-#define VENC_SYNCCTL_HPL_SHIFT			2
-#define VENC_SYNCCTL_HPL			(1 << 2)
-#define VENC_SYNCCTL_SYEV_SHIFT			1
-#define VENC_SYNCCTL_SYEV			(1 << 1)
-#define VENC_SYNCCTL_SYEH_SHIFT			0
-#define VENC_SYNCCTL_SYEH			(1 << 0)
-#define VENC_SYNCCTL_OVD_SHIFT			14
-#define VENC_SYNCCTL_OVD			(1 << 14)
-
-#define VENC_DCLKCTL_DCKEC_SHIFT		11
-#define VENC_DCLKCTL_DCKEC			(1 << 11)
-#define VENC_DCLKCTL_DCKPW_SHIFT		0
-#define VENC_DCLKCTL_DCKPW			(0x3f << 0)
-
-#define VENC_VSTAT_FIDST			(1 << 4)
-
-#define VENC_CMPNT_MRGB_SHIFT			14
-#define VENC_CMPNT_MRGB				(1 << 14)
-
-#endif				/* _VPBE_VENC_REGS_H */
diff --git a/drivers/media/platform/ti/davinci/vpss.c b/drivers/media/platform/ti/davinci/vpss.c
deleted file mode 100644
index d15b991ab17c..000000000000
--- a/drivers/media/platform/ti/davinci/vpss.c
+++ /dev/null
@@ -1,529 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) 2009 Texas Instruments.
- *
- * common vpss system module platform driver for all video drivers.
- */
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/err.h>
-
-#include <media/davinci/vpss.h>
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("VPSS Driver");
-MODULE_AUTHOR("Texas Instruments");
-
-/* DM644x defines */
-#define DM644X_SBL_PCR_VPSS		(4)
-
-#define DM355_VPSSBL_INTSEL		0x10
-#define DM355_VPSSBL_EVTSEL		0x14
-/* vpss BL register offsets */
-#define DM355_VPSSBL_CCDCMUX		0x1c
-/* vpss CLK register offsets */
-#define DM355_VPSSCLK_CLKCTRL		0x04
-/* masks and shifts */
-#define VPSS_HSSISEL_SHIFT		4
-/*
- * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4,
- * IPIPE_INT1_SDR - vpss_int5
- */
-#define DM355_VPSSBL_INTSEL_DEFAULT	0xff83ff10
-/* VENCINT - vpss_int8 */
-#define DM355_VPSSBL_EVTSEL_DEFAULT	0x4
-
-#define DM365_ISP5_PCCR				0x04
-#define DM365_ISP5_PCCR_BL_CLK_ENABLE		BIT(0)
-#define DM365_ISP5_PCCR_ISIF_CLK_ENABLE		BIT(1)
-#define DM365_ISP5_PCCR_H3A_CLK_ENABLE		BIT(2)
-#define DM365_ISP5_PCCR_RSZ_CLK_ENABLE		BIT(3)
-#define DM365_ISP5_PCCR_IPIPE_CLK_ENABLE	BIT(4)
-#define DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE	BIT(5)
-#define DM365_ISP5_PCCR_RSV			BIT(6)
-
-#define DM365_ISP5_BCR			0x08
-#define DM365_ISP5_BCR_ISIF_OUT_ENABLE	BIT(1)
-
-#define DM365_ISP5_INTSEL1		0x10
-#define DM365_ISP5_INTSEL2		0x14
-#define DM365_ISP5_INTSEL3		0x18
-#define DM365_ISP5_CCDCMUX		0x20
-#define DM365_ISP5_PG_FRAME_SIZE	0x28
-#define DM365_VPBE_CLK_CTRL		0x00
-
-#define VPSS_CLK_CTRL			0x01c40044
-#define VPSS_CLK_CTRL_VENCCLKEN		BIT(3)
-#define VPSS_CLK_CTRL_DACCLKEN		BIT(4)
-
-/*
- * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1,
- * AF - vpss_int3
- */
-#define DM365_ISP5_INTSEL1_DEFAULT	0x0b1f0100
-/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */
-#define DM365_ISP5_INTSEL2_DEFAULT	0x1f0a0f1f
-/* VENC - vpss_int8 */
-#define DM365_ISP5_INTSEL3_DEFAULT	0x00000015
-
-/* masks and shifts for DM365*/
-#define DM365_CCDC_PG_VD_POL_SHIFT	0
-#define DM365_CCDC_PG_HD_POL_SHIFT	1
-
-#define CCD_SRC_SEL_MASK		(BIT_MASK(5) | BIT_MASK(4))
-#define CCD_SRC_SEL_SHIFT		4
-
-/* Different SoC platforms supported by this driver */
-enum vpss_platform_type {
-	DM644X,
-	DM355,
-	DM365,
-};
-
-/*
- * vpss operations. Depends on platform. Not all functions are available
- * on all platforms. The api, first check if a function is available before
- * invoking it. In the probe, the function ptrs are initialized based on
- * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
- */
-struct vpss_hw_ops {
-	/* enable clock */
-	int (*enable_clock)(enum vpss_clock_sel clock_sel, int en);
-	/* select input to ccdc */
-	void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel);
-	/* clear wbl overflow bit */
-	int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel);
-	/* set sync polarity */
-	void (*set_sync_pol)(struct vpss_sync_pol);
-	/* set the PG_FRAME_SIZE register*/
-	void (*set_pg_frame_size)(struct vpss_pg_frame_size);
-	/* check and clear interrupt if occurred */
-	int (*dma_complete_interrupt)(void);
-};
-
-/* vpss configuration */
-struct vpss_oper_config {
-	__iomem void *vpss_regs_base0;
-	__iomem void *vpss_regs_base1;
-	__iomem void *vpss_regs_base2;
-	enum vpss_platform_type platform;
-	spinlock_t vpss_lock;
-	struct vpss_hw_ops hw_ops;
-};
-
-static struct vpss_oper_config oper_cfg;
-
-/* register access routines */
-static inline u32 bl_regr(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
-}
-
-static inline void bl_regw(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
-}
-
-static inline u32 vpss_regr(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base1 + offset);
-}
-
-static inline void vpss_regw(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base1 + offset);
-}
-
-/* For DM365 only */
-static inline u32 isp5_read(u32 offset)
-{
-	return __raw_readl(oper_cfg.vpss_regs_base0 + offset);
-}
-
-/* For DM365 only */
-static inline void isp5_write(u32 val, u32 offset)
-{
-	__raw_writel(val, oper_cfg.vpss_regs_base0 + offset);
-}
-
-static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK;
-
-	/* if we are using pattern generator, enable it */
-	if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG)
-		temp |= 0x08;
-
-	temp |= (src_sel << CCD_SRC_SEL_SHIFT);
-	isp5_write(temp, DM365_ISP5_CCDCMUX);
-}
-
-static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX);
-}
-
-int vpss_dma_complete_interrupt(void)
-{
-	if (!oper_cfg.hw_ops.dma_complete_interrupt)
-		return 2;
-	return oper_cfg.hw_ops.dma_complete_interrupt();
-}
-EXPORT_SYMBOL(vpss_dma_complete_interrupt);
-
-int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel)
-{
-	if (!oper_cfg.hw_ops.select_ccdc_source)
-		return -EINVAL;
-
-	oper_cfg.hw_ops.select_ccdc_source(src_sel);
-	return 0;
-}
-EXPORT_SYMBOL(vpss_select_ccdc_source);
-
-static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
-{
-	u32 mask = 1, val;
-
-	if (wbl_sel < VPSS_PCR_AEW_WBL_0 ||
-	    wbl_sel > VPSS_PCR_CCDC_WBL_O)
-		return -EINVAL;
-
-	/* writing a 0 clear the overflow */
-	mask = ~(mask << wbl_sel);
-	val = bl_regr(DM644X_SBL_PCR_VPSS) & mask;
-	bl_regw(val, DM644X_SBL_PCR_VPSS);
-	return 0;
-}
-
-void vpss_set_sync_pol(struct vpss_sync_pol sync)
-{
-	if (!oper_cfg.hw_ops.set_sync_pol)
-		return;
-
-	oper_cfg.hw_ops.set_sync_pol(sync);
-}
-EXPORT_SYMBOL(vpss_set_sync_pol);
-
-int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel)
-{
-	if (!oper_cfg.hw_ops.clear_wbl_overflow)
-		return -EINVAL;
-
-	return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel);
-}
-EXPORT_SYMBOL(vpss_clear_wbl_overflow);
-
-/*
- *  dm355_enable_clock - Enable VPSS Clock
- *  @clock_sel: Clock to be enabled/disabled
- *  @en: enable/disable flag
- *
- *  This is called to enable or disable a vpss clock
- */
-static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	unsigned long flags;
-	u32 utemp, mask = 0x1, shift = 0;
-
-	switch (clock_sel) {
-	case VPSS_VPBE_CLOCK:
-		/* nothing since lsb */
-		break;
-	case VPSS_VENC_CLOCK_SEL:
-		shift = 2;
-		break;
-	case VPSS_CFALD_CLOCK:
-		shift = 3;
-		break;
-	case VPSS_H3A_CLOCK:
-		shift = 4;
-		break;
-	case VPSS_IPIPE_CLOCK:
-		shift = 5;
-		break;
-	case VPSS_CCDC_CLOCK:
-		shift = 6;
-		break;
-	default:
-		printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n",
-		       clock_sel);
-		return -EINVAL;
-	}
-
-	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
-	utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL);
-	if (!en)
-		utemp &= ~(mask << shift);
-	else
-		utemp |= (mask << shift);
-
-	vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL);
-	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
-	return 0;
-}
-
-static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	unsigned long flags;
-	u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR;
-	u32 (*read)(u32 offset) = isp5_read;
-	void(*write)(u32 val, u32 offset) = isp5_write;
-
-	switch (clock_sel) {
-	case VPSS_BL_CLOCK:
-		break;
-	case VPSS_CCDC_CLOCK:
-		shift = 1;
-		break;
-	case VPSS_H3A_CLOCK:
-		shift = 2;
-		break;
-	case VPSS_RSZ_CLOCK:
-		shift = 3;
-		break;
-	case VPSS_IPIPE_CLOCK:
-		shift = 4;
-		break;
-	case VPSS_IPIPEIF_CLOCK:
-		shift = 5;
-		break;
-	case VPSS_PCLK_INTERNAL:
-		shift = 6;
-		break;
-	case VPSS_PSYNC_CLOCK_SEL:
-		shift = 7;
-		break;
-	case VPSS_VPBE_CLOCK:
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_VENC_CLOCK_SEL:
-		shift = 2;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_LDC_CLOCK:
-		shift = 3;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_FDIF_CLOCK:
-		shift = 4;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_OSD_CLOCK_SEL:
-		shift = 6;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	case VPSS_LDC_CLOCK_SEL:
-		shift = 7;
-		read = vpss_regr;
-		write = vpss_regw;
-		offset = DM365_VPBE_CLK_CTRL;
-		break;
-	default:
-		printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n",
-		       clock_sel);
-		return -1;
-	}
-
-	spin_lock_irqsave(&oper_cfg.vpss_lock, flags);
-	utemp = read(offset);
-	if (!en) {
-		mask = ~mask;
-		utemp &= (mask << shift);
-	} else
-		utemp |= (mask << shift);
-
-	write(utemp, offset);
-	spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags);
-
-	return 0;
-}
-
-int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en)
-{
-	if (!oper_cfg.hw_ops.enable_clock)
-		return -EINVAL;
-
-	return oper_cfg.hw_ops.enable_clock(clock_sel, en);
-}
-EXPORT_SYMBOL(vpss_enable_clock);
-
-void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync)
-{
-	int val = 0;
-	val = isp5_read(DM365_ISP5_CCDCMUX);
-
-	val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT);
-	val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT);
-
-	isp5_write(val, DM365_ISP5_CCDCMUX);
-}
-EXPORT_SYMBOL(dm365_vpss_set_sync_pol);
-
-void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
-{
-	if (!oper_cfg.hw_ops.set_pg_frame_size)
-		return;
-
-	oper_cfg.hw_ops.set_pg_frame_size(frame_size);
-}
-EXPORT_SYMBOL(vpss_set_pg_frame_size);
-
-void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size)
-{
-	int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16;
-
-	current_reg |= (frame_size.pplen - 1);
-	isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE);
-}
-EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size);
-
-static int vpss_probe(struct platform_device *pdev)
-{
-	char *platform_name;
-
-	if (!pdev->dev.platform_data) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -ENOENT;
-	}
-
-	platform_name = pdev->dev.platform_data;
-	if (!strcmp(platform_name, "dm355_vpss"))
-		oper_cfg.platform = DM355;
-	else if (!strcmp(platform_name, "dm365_vpss"))
-		oper_cfg.platform = DM365;
-	else if (!strcmp(platform_name, "dm644x_vpss"))
-		oper_cfg.platform = DM644X;
-	else {
-		dev_err(&pdev->dev, "vpss driver not supported on this platform\n");
-		return -ENODEV;
-	}
-
-	dev_info(&pdev->dev, "%s vpss probed\n", platform_name);
-	oper_cfg.vpss_regs_base0 = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(oper_cfg.vpss_regs_base0))
-		return PTR_ERR(oper_cfg.vpss_regs_base0);
-
-	if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) {
-		oper_cfg.vpss_regs_base1 = devm_platform_ioremap_resource(pdev, 1);
-		if (IS_ERR(oper_cfg.vpss_regs_base1))
-			return PTR_ERR(oper_cfg.vpss_regs_base1);
-	}
-
-	if (oper_cfg.platform == DM355) {
-		oper_cfg.hw_ops.enable_clock = dm355_enable_clock;
-		oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source;
-		/* Setup vpss interrupts */
-		bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL);
-		bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL);
-	} else if (oper_cfg.platform == DM365) {
-		oper_cfg.hw_ops.enable_clock = dm365_enable_clock;
-		oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source;
-		/* Setup vpss interrupts */
-		isp5_write((isp5_read(DM365_ISP5_PCCR) |
-				      DM365_ISP5_PCCR_BL_CLK_ENABLE |
-				      DM365_ISP5_PCCR_ISIF_CLK_ENABLE |
-				      DM365_ISP5_PCCR_H3A_CLK_ENABLE |
-				      DM365_ISP5_PCCR_RSZ_CLK_ENABLE |
-				      DM365_ISP5_PCCR_IPIPE_CLK_ENABLE |
-				      DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE |
-				      DM365_ISP5_PCCR_RSV), DM365_ISP5_PCCR);
-		isp5_write((isp5_read(DM365_ISP5_BCR) |
-			    DM365_ISP5_BCR_ISIF_OUT_ENABLE), DM365_ISP5_BCR);
-		isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1);
-		isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2);
-		isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3);
-	} else
-		oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow;
-
-	pm_runtime_enable(&pdev->dev);
-
-	pm_runtime_get(&pdev->dev);
-
-	spin_lock_init(&oper_cfg.vpss_lock);
-	dev_info(&pdev->dev, "%s vpss probe success\n", platform_name);
-
-	return 0;
-}
-
-static int vpss_remove(struct platform_device *pdev)
-{
-	pm_runtime_disable(&pdev->dev);
-	return 0;
-}
-
-static int vpss_suspend(struct device *dev)
-{
-	pm_runtime_put(dev);
-	return 0;
-}
-
-static int vpss_resume(struct device *dev)
-{
-	pm_runtime_get(dev);
-	return 0;
-}
-
-static const struct dev_pm_ops vpss_pm_ops = {
-	.suspend = vpss_suspend,
-	.resume = vpss_resume,
-};
-
-static struct platform_driver vpss_driver = {
-	.driver = {
-		.name	= "vpss",
-		.pm = &vpss_pm_ops,
-	},
-	.remove = vpss_remove,
-	.probe = vpss_probe,
-};
-
-static void vpss_exit(void)
-{
-	platform_driver_unregister(&vpss_driver);
-	iounmap(oper_cfg.vpss_regs_base2);
-	release_mem_region(VPSS_CLK_CTRL, 4);
-}
-
-static int __init vpss_init(void)
-{
-	int ret;
-
-	if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control"))
-		return -EBUSY;
-
-	oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4);
-	if (unlikely(!oper_cfg.vpss_regs_base2)) {
-		ret = -ENOMEM;
-		goto err_ioremap;
-	}
-
-	writel(VPSS_CLK_CTRL_VENCCLKEN |
-	       VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2);
-
-	ret = platform_driver_register(&vpss_driver);
-	if (ret)
-		goto err_pd_register;
-
-	return 0;
-
-err_pd_register:
-	iounmap(oper_cfg.vpss_regs_base2);
-err_ioremap:
-	release_mem_region(VPSS_CLK_CTRL, 4);
-	return ret;
-}
-subsys_initcall(vpss_init);
-module_exit(vpss_exit);
diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h
deleted file mode 100644
index 646c4b48b29d..000000000000
--- a/include/media/davinci/vpbe.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_H
-#define _VPBE_H
-
-#include <linux/videodev2.h>
-#include <linux/i2c.h>
-
-#include <media/v4l2-dev.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-device.h>
-#include <media/davinci/vpbe_osd.h>
-#include <media/davinci/vpbe_venc.h>
-#include <media/davinci/vpbe_types.h>
-
-/* OSD configuration info */
-struct osd_config_info {
-	char module_name[32];
-};
-
-struct vpbe_output {
-	struct v4l2_output output;
-	/*
-	 * If output capabilities include dv_timings, list supported timings
-	 * below
-	 */
-	char *subdev_name;
-	/*
-	 * default_mode identifies the default timings set at the venc or
-	 * external encoder.
-	 */
-	char *default_mode;
-	/*
-	 * Fields below are used for supporting multiple modes. For example,
-	 * LCD panel might support different modes and they are listed here.
-	 * Similarly for supporting external encoders, lcd controller port
-	 * requires a set of non-standard timing values to be listed here for
-	 * each supported mode since venc is used in non-standard timing mode
-	 * for interfacing with external encoder similar to configuring lcd
-	 * panel timings
-	 */
-	unsigned int num_modes;
-	struct vpbe_enc_mode_info *modes;
-	/*
-	 * Bus configuration goes here for external encoders. Some encoders
-	 * may require multiple interface types for each of the output. For
-	 * example, SD modes would use YCC8 where as HD mode would use YCC16.
-	 * Not sure if this is needed on a per mode basis instead of per
-	 * output basis. If per mode is needed, we may have to move this to
-	 * mode_info structure
-	 */
-	u32 if_params;
-};
-
-/* encoder configuration info */
-struct encoder_config_info {
-	char module_name[32];
-	/* Is this an i2c device ? */
-	unsigned int is_i2c:1;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-};
-
-/*amplifier configuration info */
-struct amp_config_info {
-	char module_name[32];
-	/* Is this an i2c device ? */
-	unsigned int is_i2c:1;
-	/* i2c subdevice board info */
-	struct i2c_board_info board_info;
-};
-
-/* structure for defining vpbe display subsystem components */
-struct vpbe_config {
-	char module_name[32];
-	/* i2c bus adapter no */
-	int i2c_adapter_id;
-	struct osd_config_info osd;
-	struct encoder_config_info venc;
-	/* external encoder information goes here */
-	int num_ext_encoders;
-	struct encoder_config_info *ext_encoders;
-	/* amplifier information goes here */
-	struct amp_config_info *amp;
-	unsigned int num_outputs;
-	/* Order is venc outputs followed by LCD and then external encoders */
-	struct vpbe_output *outputs;
-};
-
-struct vpbe_device;
-
-struct vpbe_device_ops {
-	/* Enumerate the outputs */
-	int (*enum_outputs)(struct vpbe_device *vpbe_dev,
-			    struct v4l2_output *output);
-
-	/* Set output to the given index */
-	int (*set_output)(struct vpbe_device *vpbe_dev,
-			 int index);
-
-	/* Get current output */
-	unsigned int (*get_output)(struct vpbe_device *vpbe_dev);
-
-	/* Set DV preset at current output */
-	int (*s_dv_timings)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_timings *dv_timings);
-
-	/* Get DV presets supported at the output */
-	int (*g_dv_timings)(struct vpbe_device *vpbe_dev,
-			   struct v4l2_dv_timings *dv_timings);
-
-	/* Enumerate the DV Presets supported at the output */
-	int (*enum_dv_timings)(struct vpbe_device *vpbe_dev,
-			       struct v4l2_enum_dv_timings *timings_info);
-
-	/* Set std at the output */
-	int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id);
-
-	/* Get the current std at the output */
-	int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id);
-
-	/* initialize the device */
-	int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
-	/* De-initialize the device */
-	void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev);
-
-	/* Get the current mode info */
-	int (*get_mode_info)(struct vpbe_device *vpbe_dev,
-			     struct vpbe_enc_mode_info*);
-
-	/*
-	 * Set the current mode in the encoder. Alternate way of setting
-	 * standard or DV preset or custom timings in the encoder
-	 */
-	int (*set_mode)(struct vpbe_device *vpbe_dev,
-			struct vpbe_enc_mode_info*);
-	/* Power management operations */
-	int (*suspend)(struct vpbe_device *vpbe_dev);
-	int (*resume)(struct vpbe_device *vpbe_dev);
-};
-
-/* struct for vpbe device */
-struct vpbe_device {
-	/* V4l2 device */
-	struct v4l2_device v4l2_dev;
-	/* vpbe dispay controller cfg */
-	struct vpbe_config *cfg;
-	/* parent device */
-	struct device *pdev;
-	/* external encoder v4l2 sub devices */
-	struct v4l2_subdev **encoders;
-	/* current encoder index */
-	int current_sd_index;
-	/* external amplifier v4l2 subdevice */
-	struct v4l2_subdev *amp;
-	struct mutex lock;
-	/* device initialized */
-	int initialized;
-	/* vpbe dac clock */
-	struct clk *dac_clk;
-	/* osd_device pointer */
-	struct osd_state *osd_device;
-	/* venc device pointer */
-	struct venc_platform_data *venc_device;
-	/*
-	 * fields below are accessed by users of vpbe_device. Not the
-	 * ones above
-	 */
-
-	/* current output */
-	int current_out_index;
-	/* lock used by caller to do atomic operation on vpbe device */
-	/* current timings set in the controller */
-	struct vpbe_enc_mode_info current_timings;
-	/* venc sub device */
-	struct v4l2_subdev *venc;
-	/* device operations below */
-	struct vpbe_device_ops ops;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h
deleted file mode 100644
index d8751ea926a2..000000000000
--- a/include/media/davinci/vpbe_display.h
+++ /dev/null
@@ -1,122 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/
- */
-#ifndef VPBE_DISPLAY_H
-#define VPBE_DISPLAY_H
-
-/* Header files */
-#include <linux/videodev2.h>
-#include <media/v4l2-common.h>
-#include <media/v4l2-fh.h>
-#include <media/videobuf2-v4l2.h>
-#include <media/videobuf2-dma-contig.h>
-#include <media/davinci/vpbe_types.h>
-#include <media/davinci/vpbe_osd.h>
-#include <media/davinci/vpbe.h>
-
-#define VPBE_DISPLAY_MAX_DEVICES 2
-
-enum vpbe_display_device_id {
-	VPBE_DISPLAY_DEVICE_0,
-	VPBE_DISPLAY_DEVICE_1
-};
-
-#define VPBE_DISPLAY_DRV_NAME	"vpbe-display"
-
-#define VPBE_DISPLAY_MAJOR_RELEASE              1
-#define VPBE_DISPLAY_MINOR_RELEASE              0
-#define VPBE_DISPLAY_BUILD                      1
-#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \
-	(VPBE_DISPLAY_MINOR_RELEASE << 8)  | \
-	VPBE_DISPLAY_BUILD)
-
-#define VPBE_DISPLAY_VALID_FIELD(field)   ((V4L2_FIELD_NONE == field) || \
-	 (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field))
-
-/* Exp ratio numerator and denominator constants */
-#define VPBE_DISPLAY_H_EXP_RATIO_N	9
-#define VPBE_DISPLAY_H_EXP_RATIO_D	8
-#define VPBE_DISPLAY_V_EXP_RATIO_N	6
-#define VPBE_DISPLAY_V_EXP_RATIO_D	5
-
-/* Zoom multiplication factor */
-#define VPBE_DISPLAY_ZOOM_4X	4
-#define VPBE_DISPLAY_ZOOM_2X	2
-
-/* Structures */
-struct display_layer_info {
-	int enable;
-	/* Layer ID used by Display Manager */
-	enum osd_layer id;
-	struct osd_layer_config config;
-	enum osd_zoom_factor h_zoom;
-	enum osd_zoom_factor v_zoom;
-	enum osd_h_exp_ratio h_exp;
-	enum osd_v_exp_ratio v_exp;
-};
-
-struct vpbe_disp_buffer {
-	struct vb2_v4l2_buffer vb;
-	struct list_head list;
-};
-
-/* vpbe display object structure */
-struct vpbe_layer {
-	/* Pointer to the vpbe_display */
-	struct vpbe_display *disp_dev;
-	/* Pointer pointing to current v4l2_buffer */
-	struct vpbe_disp_buffer *cur_frm;
-	/* Pointer pointing to next v4l2_buffer */
-	struct vpbe_disp_buffer *next_frm;
-	/* vb2 specific parameters
-	 * Buffer queue used in vb2
-	 */
-	struct vb2_queue buffer_queue;
-	/* Queue of filled frames */
-	struct list_head dma_queue;
-	/* Used for video buffer handling */
-	spinlock_t irqlock;
-	/* V4l2 specific parameters */
-	/* Identifies video device for this layer */
-	struct video_device video_dev;
-	/* Used to store pixel format */
-	struct v4l2_pix_format pix_fmt;
-	enum v4l2_field buf_field;
-	/* Video layer configuration params */
-	struct display_layer_info layer_info;
-	/* vpbe specific parameters
-	 * enable window for display
-	 */
-	unsigned char window_enable;
-	/* number of open instances of the layer */
-	unsigned int usrs;
-	/* Indicates id of the field which is being displayed */
-	unsigned int field_id;
-	/* Identifies device object */
-	enum vpbe_display_device_id device_id;
-	/* facilitation of ioctl ops lock by v4l2*/
-	struct mutex opslock;
-	u8 layer_first_int;
-};
-
-/* vpbe device structure */
-struct vpbe_display {
-	/* layer specific parameters */
-	/* lock for isr updates to buf layers*/
-	spinlock_t dma_queue_lock;
-	/* C-Plane offset from start of y-plane */
-	unsigned int cbcr_ofst;
-	struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES];
-	struct vpbe_device *vpbe_dev;
-	struct osd_state *osd_device;
-};
-
-struct buf_config_params {
-	unsigned char min_numbuffers;
-	unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES];
-	unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES];
-	unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES];
-};
-
-#endif	/* VPBE_DISPLAY_H */
diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h
deleted file mode 100644
index a4fc4f2a56fb..000000000000
--- a/include/media/davinci/vpbe_osd.h
+++ /dev/null
@@ -1,382 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2007-2009 Texas Instruments Inc
- * Copyright (C) 2007 MontaVista Software, Inc.
- *
- * Andy Lowe (alowe@mvista.com), MontaVista Software
- * - Initial version
- * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd.
- * - ported to sub device interface
- */
-#ifndef _OSD_H
-#define _OSD_H
-
-#include <media/davinci/vpbe_types.h>
-
-#define DM644X_VPBE_OSD_SUBDEV_NAME	"dm644x,vpbe-osd"
-#define DM365_VPBE_OSD_SUBDEV_NAME	"dm365,vpbe-osd"
-#define DM355_VPBE_OSD_SUBDEV_NAME	"dm355,vpbe-osd"
-
-/**
- * enum osd_layer
- * @WIN_OSD0: On-Screen Display Window 0
- * @WIN_VID0: Video Window 0
- * @WIN_OSD1: On-Screen Display Window 1
- * @WIN_VID1: Video Window 1
- *
- * Description:
- * An enumeration of the osd display layers.
- */
-enum osd_layer {
-	WIN_OSD0,
-	WIN_VID0,
-	WIN_OSD1,
-	WIN_VID1,
-};
-
-/**
- * enum osd_win_layer
- * @OSDWIN_OSD0: On-Screen Display Window 0
- * @OSDWIN_OSD1: On-Screen Display Window 1
- *
- * Description:
- * An enumeration of the OSD Window layers.
- */
-enum osd_win_layer {
-	OSDWIN_OSD0,
-	OSDWIN_OSD1,
-};
-
-/**
- * enum osd_pix_format
- * @PIXFMT_1BPP: 1-bit-per-pixel bitmap
- * @PIXFMT_2BPP: 2-bits-per-pixel bitmap
- * @PIXFMT_4BPP: 4-bits-per-pixel bitmap
- * @PIXFMT_8BPP: 8-bits-per-pixel bitmap
- * @PIXFMT_RGB565: 16-bits-per-pixel RGB565
- * @PIXFMT_YCBCRI: YUV 4:2:2
- * @PIXFMT_RGB888: 24-bits-per-pixel RGB888
- * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap
- * @PIXFMT_NV12: YUV 4:2:0 planar
- * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp)
- *
- * Description:
- * An enumeration of the DaVinci pixel formats.
- */
-enum osd_pix_format {
-	PIXFMT_1BPP = 0,
-	PIXFMT_2BPP,
-	PIXFMT_4BPP,
-	PIXFMT_8BPP,
-	PIXFMT_RGB565,
-	PIXFMT_YCBCRI,
-	PIXFMT_RGB888,
-	PIXFMT_YCRCBI,
-	PIXFMT_NV12,
-	PIXFMT_OSD_ATTR,
-};
-
-/**
- * enum osd_h_exp_ratio
- * @H_EXP_OFF: no expansion (1/1)
- * @H_EXP_9_OVER_8: 9/8 expansion ratio
- * @H_EXP_3_OVER_2: 3/2 expansion ratio
- *
- * Description:
- * An enumeration of the available horizontal expansion ratios.
- */
-enum osd_h_exp_ratio {
-	H_EXP_OFF,
-	H_EXP_9_OVER_8,
-	H_EXP_3_OVER_2,
-};
-
-/**
- * enum osd_v_exp_ratio
- * @V_EXP_OFF: no expansion (1/1)
- * @V_EXP_6_OVER_5: 6/5 expansion ratio
- *
- * Description:
- * An enumeration of the available vertical expansion ratios.
- */
-enum osd_v_exp_ratio {
-	V_EXP_OFF,
-	V_EXP_6_OVER_5,
-};
-
-/**
- * enum osd_zoom_factor
- * @ZOOM_X1: no zoom (x1)
- * @ZOOM_X2: x2 zoom
- * @ZOOM_X4: x4 zoom
- *
- * Description:
- * An enumeration of the available zoom factors.
- */
-enum osd_zoom_factor {
-	ZOOM_X1,
-	ZOOM_X2,
-	ZOOM_X4,
-};
-
-/**
- * enum osd_clut
- * @ROM_CLUT: ROM CLUT
- * @RAM_CLUT: RAM CLUT
- *
- * Description:
- * An enumeration of the available Color Lookup Tables (CLUTs).
- */
-enum osd_clut {
-	ROM_CLUT,
-	RAM_CLUT,
-};
-
-/**
- * enum osd_rom_clut
- * @ROM_CLUT0: Macintosh CLUT
- * @ROM_CLUT1: CLUT from DM270 and prior devices
- *
- * Description:
- * An enumeration of the ROM Color Lookup Table (CLUT) options.
- */
-enum osd_rom_clut {
-	ROM_CLUT0,
-	ROM_CLUT1,
-};
-
-/**
- * enum osd_blending_factor
- * @OSD_0_VID_8: OSD pixels are fully transparent
- * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8
- * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8
- * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8
- * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8
- * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8
- * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8
- * @OSD_8_VID_0: OSD pixels are fully opaque
- *
- * Description:
- * An enumeration of the DaVinci pixel blending factor options.
- */
-enum osd_blending_factor {
-	OSD_0_VID_8,
-	OSD_1_VID_7,
-	OSD_2_VID_6,
-	OSD_3_VID_5,
-	OSD_4_VID_4,
-	OSD_5_VID_3,
-	OSD_6_VID_2,
-	OSD_8_VID_0,
-};
-
-/**
- * enum osd_blink_interval
- * @BLINK_X1: blink interval is 1 vertical refresh cycle
- * @BLINK_X2: blink interval is 2 vertical refresh cycles
- * @BLINK_X3: blink interval is 3 vertical refresh cycles
- * @BLINK_X4: blink interval is 4 vertical refresh cycles
- *
- * Description:
- * An enumeration of the DaVinci pixel blinking interval options.
- */
-enum osd_blink_interval {
-	BLINK_X1,
-	BLINK_X2,
-	BLINK_X3,
-	BLINK_X4,
-};
-
-/**
- * enum osd_cursor_h_width
- * @H_WIDTH_1: horizontal line width is 1 pixel
- * @H_WIDTH_4: horizontal line width is 4 pixels
- * @H_WIDTH_8: horizontal line width is 8 pixels
- * @H_WIDTH_12: horizontal line width is 12 pixels
- * @H_WIDTH_16: horizontal line width is 16 pixels
- * @H_WIDTH_20: horizontal line width is 20 pixels
- * @H_WIDTH_24: horizontal line width is 24 pixels
- * @H_WIDTH_28: horizontal line width is 28 pixels
- */
-enum osd_cursor_h_width {
-	H_WIDTH_1,
-	H_WIDTH_4,
-	H_WIDTH_8,
-	H_WIDTH_12,
-	H_WIDTH_16,
-	H_WIDTH_20,
-	H_WIDTH_24,
-	H_WIDTH_28,
-};
-
-/**
- * enum osd_cursor_v_width
- * @V_WIDTH_1: vertical line width is 1 line
- * @V_WIDTH_2: vertical line width is 2 lines
- * @V_WIDTH_4: vertical line width is 4 lines
- * @V_WIDTH_6: vertical line width is 6 lines
- * @V_WIDTH_8: vertical line width is 8 lines
- * @V_WIDTH_10: vertical line width is 10 lines
- * @V_WIDTH_12: vertical line width is 12 lines
- * @V_WIDTH_14: vertical line width is 14 lines
- */
-enum osd_cursor_v_width {
-	V_WIDTH_1,
-	V_WIDTH_2,
-	V_WIDTH_4,
-	V_WIDTH_6,
-	V_WIDTH_8,
-	V_WIDTH_10,
-	V_WIDTH_12,
-	V_WIDTH_14,
-};
-
-/**
- * struct osd_cursor_config
- * @xsize: horizontal size in pixels
- * @ysize: vertical size in lines
- * @xpos: horizontal offset in pixels from the left edge of the display
- * @ypos: vertical offset in lines from the top of the display
- * @interlaced: Non-zero if the display is interlaced, or zero otherwise
- * @h_width: horizontal line width
- * @v_width: vertical line width
- * @clut: the CLUT selector (ROM or RAM) for the cursor color
- * @clut_index: an index into the CLUT for the cursor color
- *
- * Description:
- * A structure describing the configuration parameters of the hardware
- * rectangular cursor.
- */
-struct osd_cursor_config {
-	unsigned xsize;
-	unsigned ysize;
-	unsigned xpos;
-	unsigned ypos;
-	int interlaced;
-	enum osd_cursor_h_width h_width;
-	enum osd_cursor_v_width v_width;
-	enum osd_clut clut;
-	unsigned char clut_index;
-};
-
-/**
- * struct osd_layer_config
- * @pixfmt: pixel format
- * @line_length: offset in bytes between start of each line in memory
- * @xsize: number of horizontal pixels displayed per line
- * @ysize: number of lines displayed
- * @xpos: horizontal offset in pixels from the left edge of the display
- * @ypos: vertical offset in lines from the top of the display
- * @interlaced: Non-zero if the display is interlaced, or zero otherwise
- *
- * Description:
- * A structure describing the configuration parameters of an On-Screen Display
- * (OSD) or video layer related to how the image is stored in memory.
- * @line_length must be a multiple of the cache line size (32 bytes).
- */
-struct osd_layer_config {
-	enum osd_pix_format pixfmt;
-	unsigned line_length;
-	unsigned xsize;
-	unsigned ysize;
-	unsigned xpos;
-	unsigned ypos;
-	int interlaced;
-};
-
-/* parameters that apply on a per-window (OSD or video) basis */
-struct osd_window_state {
-	int is_allocated;
-	int is_enabled;
-	unsigned long fb_base_phys;
-	enum osd_zoom_factor h_zoom;
-	enum osd_zoom_factor v_zoom;
-	struct osd_layer_config lconfig;
-};
-
-/* parameters that apply on a per-OSD-window basis */
-struct osd_osdwin_state {
-	enum osd_clut clut;
-	enum osd_blending_factor blend;
-	int colorkey_blending;
-	unsigned colorkey;
-	int rec601_attenuation;
-	/* index is pixel value */
-	unsigned char palette_map[16];
-};
-
-/* hardware rectangular cursor parameters */
-struct osd_cursor_state {
-	int is_enabled;
-	struct osd_cursor_config config;
-};
-
-struct osd_state;
-
-struct vpbe_osd_ops {
-	int (*initialize)(struct osd_state *sd);
-	int (*request_layer)(struct osd_state *sd, enum osd_layer layer);
-	void (*release_layer)(struct osd_state *sd, enum osd_layer layer);
-	int (*enable_layer)(struct osd_state *sd, enum osd_layer layer,
-			    int otherwin);
-	void (*disable_layer)(struct osd_state *sd, enum osd_layer layer);
-	int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer,
-				struct osd_layer_config *lconfig);
-	void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer,
-				 struct osd_layer_config *lconfig);
-	void (*start_layer)(struct osd_state *sd, enum osd_layer layer,
-			    unsigned long fb_base_phys,
-			    unsigned long cbcr_ofst);
-	void (*set_left_margin)(struct osd_state *sd, u32 val);
-	void (*set_top_margin)(struct osd_state *sd, u32 val);
-	void (*set_interpolation_filter)(struct osd_state *sd, int filter);
-	int (*set_vid_expansion)(struct osd_state *sd,
-					enum osd_h_exp_ratio h_exp,
-					enum osd_v_exp_ratio v_exp);
-	void (*get_vid_expansion)(struct osd_state *sd,
-					enum osd_h_exp_ratio *h_exp,
-					enum osd_v_exp_ratio *v_exp);
-	void (*set_zoom)(struct osd_state *sd, enum osd_layer layer,
-				enum osd_zoom_factor h_zoom,
-				enum osd_zoom_factor v_zoom);
-};
-
-struct osd_state {
-	enum vpbe_version vpbe_type;
-	spinlock_t lock;
-	struct device *dev;
-	dma_addr_t osd_base_phys;
-	void __iomem *osd_base;
-	unsigned long osd_size;
-	/* 1-->the isr will toggle the VID0 ping-pong buffer */
-	int pingpong;
-	int interpolation_filter;
-	int field_inversion;
-	enum osd_h_exp_ratio osd_h_exp;
-	enum osd_v_exp_ratio osd_v_exp;
-	enum osd_h_exp_ratio vid_h_exp;
-	enum osd_v_exp_ratio vid_v_exp;
-	enum osd_clut backg_clut;
-	unsigned backg_clut_index;
-	enum osd_rom_clut rom_clut;
-	int is_blinking;
-	/* attribute window blinking enabled */
-	enum osd_blink_interval blink;
-	/* YCbCrI or YCrCbI */
-	enum osd_pix_format yc_pixfmt;
-	/* columns are Y, Cb, Cr */
-	unsigned char clut_ram[256][3];
-	struct osd_cursor_state cursor;
-	/* OSD0, VID0, OSD1, VID1 */
-	struct osd_window_state win[4];
-	/* OSD0, OSD1 */
-	struct osd_osdwin_state osdwin[2];
-	/* OSD device Operations */
-	struct vpbe_osd_ops ops;
-};
-
-struct osd_platform_data {
-	int  field_inv_wa_enable;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h
deleted file mode 100644
index 6015cda235cc..000000000000
--- a/include/media/davinci/vpbe_types.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_TYPES_H
-#define _VPBE_TYPES_H
-
-enum vpbe_version {
-	VPBE_VERSION_1 = 1,
-	VPBE_VERSION_2,
-	VPBE_VERSION_3,
-};
-
-/* vpbe_timing_type - Timing types used in vpbe device */
-enum vpbe_enc_timings_type {
-	VPBE_ENC_STD = 0x1,
-	VPBE_ENC_DV_TIMINGS = 0x4,
-	/* Used when set timings through FB device interface */
-	VPBE_ENC_TIMINGS_INVALID = 0x8,
-};
-
-/*
- * struct vpbe_enc_mode_info
- * @name: ptr to name string of the standard, "NTSC", "PAL" etc
- * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard
- * @interlaced: 1 - interlaced, 0 - non interlaced/progressive
- * @xres: x or horizontal resolution of the display
- * @yres: y or vertical resolution of the display
- * @fps: frame per second
- * @left_margin: left margin of the display
- * @right_margin: right margin of the display
- * @upper_margin: upper margin of the display
- * @lower_margin: lower margin of the display
- * @hsync_len: h-sync length
- * @vsync_len: v-sync length
- * @flags: bit field: bit usage is documented below
- *
- * Description:
- *  Structure holding timing and resolution information of a standard.
- * Used by vpbe_device to set required non-standard timing in the
- * venc when lcd controller output is connected to a external encoder.
- * A table of timings is maintained in vpbe device to set this in
- * venc when external encoder is connected to lcd controller output.
- * Encoder may provide a g_dv_timings() API to override these values
- * as needed.
- *
- *  Notes
- *  ------
- *  if_type should be used only by encoder manager and encoder.
- *  flags usage
- *     b0 (LSB) - hsync polarity, 0 - negative, 1 - positive
- *     b1       - vsync polarity, 0 - negative, 1 - positive
- *     b2       - field id polarity, 0 - negative, 1  - positive
- */
-struct vpbe_enc_mode_info {
-	unsigned char *name;
-	enum vpbe_enc_timings_type timings_type;
-	v4l2_std_id std_id;
-	struct v4l2_dv_timings dv_timings;
-	unsigned int interlaced;
-	unsigned int xres;
-	unsigned int yres;
-	struct v4l2_fract aspect;
-	struct v4l2_fract fps;
-	unsigned int left_margin;
-	unsigned int right_margin;
-	unsigned int upper_margin;
-	unsigned int lower_margin;
-	unsigned int hsync_len;
-	unsigned int vsync_len;
-	unsigned int flags;
-};
-
-#endif
diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h
deleted file mode 100644
index 93cf6a5fb49d..000000000000
--- a/include/media/davinci/vpbe_venc.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2010 Texas Instruments Inc
- */
-#ifndef _VPBE_VENC_H
-#define _VPBE_VENC_H
-
-#include <media/v4l2-subdev.h>
-#include <media/davinci/vpbe_types.h>
-
-#define DM644X_VPBE_VENC_SUBDEV_NAME	"dm644x,vpbe-venc"
-#define DM365_VPBE_VENC_SUBDEV_NAME	"dm365,vpbe-venc"
-#define DM355_VPBE_VENC_SUBDEV_NAME	"dm355,vpbe-venc"
-
-/* venc events */
-#define VENC_END_OF_FRAME	BIT(0)
-#define VENC_FIRST_FIELD	BIT(1)
-#define VENC_SECOND_FIELD	BIT(2)
-
-struct venc_platform_data {
-	int (*setup_pinmux)(u32 if_type, int field);
-	int (*setup_clock)(enum vpbe_enc_timings_type type,
-			   unsigned int pixclock);
-	int (*setup_if_config)(u32 pixcode);
-	/* Number of LCD outputs supported */
-	int num_lcd_outputs;
-	struct vpbe_if_params *lcd_if_params;
-};
-
-enum venc_ioctls {
-	VENC_GET_FLD = 1,
-};
-
-/* exported functions */
-struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev,
-		const char *venc_name);
-#endif
diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h
deleted file mode 100644
index 315fa77e238c..000000000000
--- a/include/media/davinci/vpss.h
+++ /dev/null
@@ -1,111 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (C) 2009 Texas Instruments Inc
- *
- * vpss - video processing subsystem module header file.
- *
- * Include this header file if a driver needs to configure vpss system
- * module. It exports a set of library functions  for video drivers to
- * configure vpss system module functions such as clock enable/disable,
- * vpss interrupt mux to arm, and other common vpss system module
- * functions.
- */
-#ifndef _VPSS_H
-#define _VPSS_H
-
-/* selector for ccdc input selection on DM355 */
-enum vpss_ccdc_source_sel {
-	VPSS_CCDCIN,
-	VPSS_HSSIIN,
-	VPSS_PGLPBK,	/* for DM365 only */
-	VPSS_CCDCPG	/* for DM365 only */
-};
-
-struct vpss_sync_pol {
-	unsigned int ccdpg_hdpol:1;
-	unsigned int ccdpg_vdpol:1;
-};
-
-struct vpss_pg_frame_size {
-	short hlpfr;
-	short pplen;
-};
-
-/* Used for enable/disable VPSS Clock */
-enum vpss_clock_sel {
-	/* DM355/DM365 */
-	VPSS_CCDC_CLOCK,
-	VPSS_IPIPE_CLOCK,
-	VPSS_H3A_CLOCK,
-	VPSS_CFALD_CLOCK,
-	/*
-	 * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api
-	 * following applies:-
-	 * en = 0 selects ENC_CLK
-	 * en = 1 selects ENC_CLK/2
-	 */
-	VPSS_VENC_CLOCK_SEL,
-	VPSS_VPBE_CLOCK,
-	/* DM365 only clocks */
-	VPSS_IPIPEIF_CLOCK,
-	VPSS_RSZ_CLOCK,
-	VPSS_BL_CLOCK,
-	/*
-	 * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api
-	 * following applies:-
-	 * en = 0 disable internal PCLK
-	 * en = 1 enables internal PCLK
-	 */
-	VPSS_PCLK_INTERNAL,
-	/*
-	 * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api
-	 * following applies:-
-	 * en = 0 enables MMR clock
-	 * en = 1 enables VPSS clock
-	 */
-	VPSS_PSYNC_CLOCK_SEL,
-	VPSS_LDC_CLOCK_SEL,
-	VPSS_OSD_CLOCK_SEL,
-	VPSS_FDIF_CLOCK,
-	VPSS_LDC_CLOCK
-};
-
-/* select input to ccdc on dm355 */
-int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel);
-/* enable/disable a vpss clock, 0 - success, -1 - failure */
-int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en);
-/* set sync polarity, only for DM365*/
-void dm365_vpss_set_sync_pol(struct vpss_sync_pol);
-/* set the PG_FRAME_SIZE register, only for DM365 */
-void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size);
-
-/* wbl reset for dm644x */
-enum vpss_wbl_sel {
-	VPSS_PCR_AEW_WBL_0 = 16,
-	VPSS_PCR_AF_WBL_0,
-	VPSS_PCR_RSZ4_WBL_0,
-	VPSS_PCR_RSZ3_WBL_0,
-	VPSS_PCR_RSZ2_WBL_0,
-	VPSS_PCR_RSZ1_WBL_0,
-	VPSS_PCR_PREV_WBL_0,
-	VPSS_PCR_CCDC_WBL_O,
-};
-/* clear wbl overflow flag for DM6446 */
-int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel);
-
-/* set sync polarity*/
-void vpss_set_sync_pol(struct vpss_sync_pol sync);
-/* set the PG_FRAME_SIZE register */
-void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size);
-/*
- * vpss_check_and_clear_interrupt - check and clear interrupt
- * @irq - common enumerator for IRQ
- *
- * Following return values used:-
- * 0 - interrupt occurred and cleared
- * 1 - interrupt not occurred
- * 2 - interrupt status not available
- */
-int vpss_dma_complete_interrupt(void);
-
-#endif