diff options
author | Stephen Hemminger <stephen@networkplumber.org> | 2014-01-11 01:01:05 +0400 |
---|---|---|
committer | Bjorn Helgaas <bhelgaas@google.com> | 2014-01-11 03:58:49 +0400 |
commit | ecc8635608342a05ded722f0e30e6ccd682f84a6 (patch) | |
tree | 33291aa0450523faefef5a2273012b986538b2d8 | |
parent | 3ea8197e1371abd68aef289cad97feb764281642 (diff) | |
download | linux-ecc8635608342a05ded722f0e30e6ccd682f84a6.tar.xz |
PCI: Remove unused Optimized Buffer Flush/Fill support
My philosophy is unused code is dead code. And dead code is subject to bit
rot and is a likely source of bugs. Use it or lose it.
This reverts 48a92a8179b3 ("PCI: add OBFF enable/disable support"),
removing these interfaces:
pci_enable_obff()
pci_disable_obff()
[bhelgaas: split to separate patch, also remove prototypes from pci.h]
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
-rw-r--r-- | drivers/pci/pci.c | 73 | ||||
-rw-r--r-- | include/linux/pci.h | 16 |
2 files changed, 0 insertions, 89 deletions
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 020f672deabb..84a24d16778f 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2150,79 +2150,6 @@ void pci_disable_ido(struct pci_dev *dev, unsigned long type) } EXPORT_SYMBOL(pci_disable_ido); -/** - * pci_enable_obff - enable optimized buffer flush/fill - * @dev: PCI device - * @type: type of signaling to use - * - * Try to enable @type OBFF signaling on @dev. It will try using WAKE# - * signaling if possible, falling back to message signaling only if - * WAKE# isn't supported. @type should indicate whether the PCIe link - * be brought out of L0s or L1 to send the message. It should be either - * %PCI_EXP_OBFF_SIGNAL_ALWAYS or %PCI_OBFF_SIGNAL_L0. - * - * If your device can benefit from receiving all messages, even at the - * power cost of bringing the link back up from a low power state, use - * %PCI_EXP_OBFF_SIGNAL_ALWAYS. Otherwise, use %PCI_OBFF_SIGNAL_L0 (the - * preferred type). - * - * RETURNS: - * Zero on success, appropriate error number on failure. - */ -int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type type) -{ - u32 cap; - u16 ctrl; - int ret; - - pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap); - if (!(cap & PCI_EXP_DEVCAP2_OBFF_MASK)) - return -ENOTSUPP; /* no OBFF support at all */ - - /* Make sure the topology supports OBFF as well */ - if (dev->bus->self) { - ret = pci_enable_obff(dev->bus->self, type); - if (ret) - return ret; - } - - pcie_capability_read_word(dev, PCI_EXP_DEVCTL2, &ctrl); - if (cap & PCI_EXP_DEVCAP2_OBFF_WAKE) - ctrl |= PCI_EXP_DEVCTL2_OBFF_WAKE_EN; - else { - switch (type) { - case PCI_EXP_OBFF_SIGNAL_L0: - if (!(ctrl & PCI_EXP_DEVCTL2_OBFF_WAKE_EN)) - ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGA_EN; - break; - case PCI_EXP_OBFF_SIGNAL_ALWAYS: - ctrl &= ~PCI_EXP_DEVCTL2_OBFF_WAKE_EN; - ctrl |= PCI_EXP_DEVCTL2_OBFF_MSGB_EN; - break; - default: - WARN(1, "bad OBFF signal type\n"); - return -ENOTSUPP; - } - } - pcie_capability_write_word(dev, PCI_EXP_DEVCTL2, ctrl); - - return 0; -} -EXPORT_SYMBOL(pci_enable_obff); - -/** - * pci_disable_obff - disable optimized buffer flush/fill - * @dev: PCI device - * - * Disable OBFF on @dev. - */ -void pci_disable_obff(struct pci_dev *dev) -{ - pcie_capability_clear_word(dev, PCI_EXP_DEVCTL2, - PCI_EXP_DEVCTL2_OBFF_WAKE_EN); -} -EXPORT_SYMBOL(pci_disable_obff); - static int pci_acs_enable; /** diff --git a/include/linux/pci.h b/include/linux/pci.h index ee26454746ba..b8cbe52c7a48 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1002,13 +1002,6 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, void pci_enable_ido(struct pci_dev *dev, unsigned long type); void pci_disable_ido(struct pci_dev *dev, unsigned long type); -enum pci_obff_signal_type { - PCI_EXP_OBFF_SIGNAL_L0 = 0, - PCI_EXP_OBFF_SIGNAL_ALWAYS = 1, -}; -int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); -void pci_disable_obff(struct pci_dev *dev); - /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); void set_pcie_hotplug_bridge(struct pci_dev *pdev); @@ -1427,15 +1420,6 @@ static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type) { } -static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type) -{ - return 0; -} - -static inline void pci_disable_obff(struct pci_dev *dev) -{ -} - static inline int pci_request_regions(struct pci_dev *dev, const char *res_name) { return -EIO; |