Blackfin: unify SDH/RSI bitmasks

Avoid duplication and ugly global namespace pollution.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

4 files changed, 117 insertions, 397 deletions

diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h
index d61d5497c590..6a4cfe2d3367 100644
--- a/arch/blackfin/include/asm/bfin_sdh.h
+++ b/arch/blackfin/include/asm/bfin_sdh.h
@@ -1,7 +1,7 @@
 /*
- * bfin_sdh.h - Blackfin SDH definitions
+ * Blackfin Secure Digital Host (SDH) definitions
  *
- * Copyright 2008 Analog Devices Inc.
+ * Copyright 2008-2010 Analog Devices Inc.
  *
  * Licensed under the GPL-2 or later.
  */
@@ -9,6 +9,7 @@
 #ifndef __BFIN_SDH_H__
 #define __BFIN_SDH_H__
 
+/* Platform resources */
 struct bfin_sd_host {
 	int dma_chan;
 	int irq_int0;
@@ -16,4 +17,118 @@ struct bfin_sd_host {
 	u16 pin_req[7];
 };
 
+/* SDH_COMMAND bitmasks */
+#define CMD_IDX            0x3f        /* Command Index */
+#define CMD_RSP            (1 << 6)    /* Response */
+#define CMD_L_RSP          (1 << 7)    /* Long Response */
+#define CMD_INT_E          (1 << 8)    /* Command Interrupt */
+#define CMD_PEND_E         (1 << 9)    /* Command Pending */
+#define CMD_E              (1 << 10)   /* Command Enable */
+
+/* SDH_PWR_CTL bitmasks */
+#define PWR_ON             0x3         /* Power On */
+#define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
+#define ROD_CTL            (1 << 7)    /* Rod Control */
+
+/* SDH_CLK_CTL bitmasks */
+#define CLKDIV             0xff        /* MC_CLK Divisor */
+#define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
+#define PWR_SV_E           (1 << 9)    /* Power Save Enable */
+#define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
+#define WIDE_BUS           (1 << 11)   /* Wide Bus Mode Enable */
+
+/* SDH_RESP_CMD bitmasks */
+#define RESP_CMD           0x3f        /* Response Command */
+
+/* SDH_DATA_CTL bitmasks */
+#define DTX_E              (1 << 0)    /* Data Transfer Enable */
+#define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
+#define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
+#define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+
+/* SDH_STATUS bitmasks */
+#define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
+#define DAT_CRC_FAIL       (1 << 1)    /* Data CRC Fail */
+#define CMD_TIME_OUT       (1 << 2)    /* CMD Time Out */
+#define DAT_TIME_OUT       (1 << 3)    /* Data Time Out */
+#define TX_UNDERRUN        (1 << 4)    /* Transmit Underrun */
+#define RX_OVERRUN         (1 << 5)    /* Receive Overrun */
+#define CMD_RESP_END       (1 << 6)    /* CMD Response End */
+#define CMD_SENT           (1 << 7)    /* CMD Sent */
+#define DAT_END            (1 << 8)    /* Data End */
+#define START_BIT_ERR      (1 << 9)    /* Start Bit Error */
+#define DAT_BLK_END        (1 << 10)   /* Data Block End */
+#define CMD_ACT            (1 << 11)   /* CMD Active */
+#define TX_ACT             (1 << 12)   /* Transmit Active */
+#define RX_ACT             (1 << 13)   /* Receive Active */
+#define TX_FIFO_STAT       (1 << 14)   /* Transmit FIFO Status */
+#define RX_FIFO_STAT       (1 << 15)   /* Receive FIFO Status */
+#define TX_FIFO_FULL       (1 << 16)   /* Transmit FIFO Full */
+#define RX_FIFO_FULL       (1 << 17)   /* Receive FIFO Full */
+#define TX_FIFO_ZERO       (1 << 18)   /* Transmit FIFO Empty */
+#define RX_DAT_ZERO        (1 << 19)   /* Receive FIFO Empty */
+#define TX_DAT_RDY         (1 << 20)   /* Transmit Data Available */
+#define RX_FIFO_RDY        (1 << 21)   /* Receive Data Available */
+
+/* SDH_STATUS_CLR bitmasks */
+#define CMD_CRC_FAIL_STAT  (1 << 0)    /* CMD CRC Fail Status */
+#define DAT_CRC_FAIL_STAT  (1 << 1)    /* Data CRC Fail Status */
+#define CMD_TIMEOUT_STAT   (1 << 2)    /* CMD Time Out Status */
+#define DAT_TIMEOUT_STAT   (1 << 3)    /* Data Time Out status */
+#define TX_UNDERRUN_STAT   (1 << 4)    /* Transmit Underrun Status */
+#define RX_OVERRUN_STAT    (1 << 5)    /* Receive Overrun Status */
+#define CMD_RESP_END_STAT  (1 << 6)    /* CMD Response End Status */
+#define CMD_SENT_STAT      (1 << 7)    /* CMD Sent Status */
+#define DAT_END_STAT       (1 << 8)    /* Data End Status */
+#define START_BIT_ERR_STAT (1 << 9)    /* Start Bit Error Status */
+#define DAT_BLK_END_STAT   (1 << 10)   /* Data Block End Status */
+
+/* SDH_MASK0 bitmasks */
+#define CMD_CRC_FAIL_MASK  (1 << 0)    /* CMD CRC Fail Mask */
+#define DAT_CRC_FAIL_MASK  (1 << 1)    /* Data CRC Fail Mask */
+#define CMD_TIMEOUT_MASK   (1 << 2)    /* CMD Time Out Mask */
+#define DAT_TIMEOUT_MASK   (1 << 3)    /* Data Time Out Mask */
+#define TX_UNDERRUN_MASK   (1 << 4)    /* Transmit Underrun Mask */
+#define RX_OVERRUN_MASK    (1 << 5)    /* Receive Overrun Mask */
+#define CMD_RESP_END_MASK  (1 << 6)    /* CMD Response End Mask */
+#define CMD_SENT_MASK      (1 << 7)    /* CMD Sent Mask */
+#define DAT_END_MASK       (1 << 8)    /* Data End Mask */
+#define START_BIT_ERR_MASK (1 << 9)    /* Start Bit Error Mask */
+#define DAT_BLK_END_MASK   (1 << 10)   /* Data Block End Mask */
+#define CMD_ACT_MASK       (1 << 11)   /* CMD Active Mask */
+#define TX_ACT_MASK        (1 << 12)   /* Transmit Active Mask */
+#define RX_ACT_MASK        (1 << 13)   /* Receive Active Mask */
+#define TX_FIFO_STAT_MASK  (1 << 14)   /* Transmit FIFO Status Mask */
+#define RX_FIFO_STAT_MASK  (1 << 15)   /* Receive FIFO Status Mask */
+#define TX_FIFO_FULL_MASK  (1 << 16)   /* Transmit FIFO Full Mask */
+#define RX_FIFO_FULL_MASK  (1 << 17)   /* Receive FIFO Full Mask */
+#define TX_FIFO_ZERO_MASK  (1 << 18)   /* Transmit FIFO Empty Mask */
+#define RX_DAT_ZERO_MASK   (1 << 19)   /* Receive FIFO Empty Mask */
+#define TX_DAT_RDY_MASK    (1 << 20)   /* Transmit Data Available Mask */
+#define RX_FIFO_RDY_MASK   (1 << 21)   /* Receive Data Available Mask */
+
+/* SDH_FIFO_CNT bitmasks */
+#define FIFO_COUNT         0x7fff      /* FIFO Count */
+
+/* SDH_E_STATUS bitmasks */
+#define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
+#define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+
+/* SDH_E_MASK bitmasks */
+#define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
+#define SCD_MSK            (1 << 6)    /* Mask Card Detect */
+
+/* SDH_CFG bitmasks */
+#define CLKS_EN            (1 << 0)    /* Clocks Enable */
+#define SD4E               (1 << 2)    /* SDIO 4-Bit Enable */
+#define MWE                (1 << 3)    /* Moving Window Enable */
+#define SD_RST             (1 << 4)    /* SDMMC Reset */
+#define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
+#define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+
+/* SDH_RD_WAIT_EN bitmasks */
+#define RWR                (1 << 0)    /* Read Wait Request */
+
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h
index 92e950d6e996..98a51c479290 100644
--- a/arch/blackfin/mach-bf518/include/mach/defBF514.h
+++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h
@@ -45,139 +45,4 @@
 #define RSI_PID6                       0xFFC03FF8 /* RSI Peripheral ID Register 6 */
 #define RSI_PID7                       0xFFC03FFC /* RSI Peripheral ID Register 7 */
 
-/* ********************************************************** */
-/*     SINGLE BIT MACRO PAIRS (bit mask and negated one)      */
-/*     and MULTI BIT READ MACROS                              */
-/* ********************************************************** */
-
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 #endif /* _DEF_BF514_H */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF542.h b/arch/blackfin/mach-bf548/include/mach/defBF542.h
index d3bc6d1df547..abf5f750dd8b 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF542.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF542.h
@@ -366,136 +366,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */
diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h
index 3d131065f8e6..be21ba5b3aa8 100644
--- a/arch/blackfin/mach-bf548/include/mach/defBF547.h
+++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h
@@ -646,136 +646,6 @@
 
 #define           KPAD_SOFTEVAL_E  0x2        /* Software Programmable Force Evaluate */
 
-/* Bit masks for SDH_COMMAND */
-
-#define                   CMD_IDX  0x3f       /* Command Index */
-#define                   CMD_RSP  0x40       /* Response */
-#define                 CMD_L_RSP  0x80       /* Long Response */
-#define                 CMD_INT_E  0x100      /* Command Interrupt */
-#define                CMD_PEND_E  0x200      /* Command Pending */
-#define                     CMD_E  0x400      /* Command Enable */
-
-/* Bit masks for SDH_PWR_CTL */
-
-#define                    PWR_ON  0x3        /* Power On */
-#if 0
-#define                       TBD  0x3c       /* TBD */
-#endif
-#define                 SD_CMD_OD  0x40       /* Open Drain Output */
-#define                   ROD_CTL  0x80       /* Rod Control */
-
-/* Bit masks for SDH_CLK_CTL */
-
-#define                    CLKDIV  0xff       /* MC_CLK Divisor */
-#define                     CLK_E  0x100      /* MC_CLK Bus Clock Enable */
-#define                  PWR_SV_E  0x200      /* Power Save Enable */
-#define             CLKDIV_BYPASS  0x400      /* Bypass Divisor */
-#define                  WIDE_BUS  0x800      /* Wide Bus Mode Enable */
-
-/* Bit masks for SDH_RESP_CMD */
-
-#define                  RESP_CMD  0x3f       /* Response Command */
-
-/* Bit masks for SDH_DATA_CTL */
-
-#define                     DTX_E  0x1        /* Data Transfer Enable */
-#define                   DTX_DIR  0x2        /* Data Transfer Direction */
-#define                  DTX_MODE  0x4        /* Data Transfer Mode */
-#define                 DTX_DMA_E  0x8        /* Data Transfer DMA Enable */
-#define              DTX_BLK_LGTH  0xf0       /* Data Transfer Block Length */
-
-/* Bit masks for SDH_STATUS */
-
-#define              CMD_CRC_FAIL  0x1        /* CMD CRC Fail */
-#define              DAT_CRC_FAIL  0x2        /* Data CRC Fail */
-#define               CMD_TIME_OUT  0x4        /* CMD Time Out */
-#define               DAT_TIME_OUT  0x8        /* Data Time Out */
-#define               TX_UNDERRUN  0x10       /* Transmit Underrun */
-#define                RX_OVERRUN  0x20       /* Receive Overrun */
-#define              CMD_RESP_END  0x40       /* CMD Response End */
-#define                  CMD_SENT  0x80       /* CMD Sent */
-#define                   DAT_END  0x100      /* Data End */
-#define             START_BIT_ERR  0x200      /* Start Bit Error */
-#define               DAT_BLK_END  0x400      /* Data Block End */
-#define                   CMD_ACT  0x800      /* CMD Active */
-#define                    TX_ACT  0x1000     /* Transmit Active */
-#define                    RX_ACT  0x2000     /* Receive Active */
-#define              TX_FIFO_STAT  0x4000     /* Transmit FIFO Status */
-#define              RX_FIFO_STAT  0x8000     /* Receive FIFO Status */
-#define              TX_FIFO_FULL  0x10000    /* Transmit FIFO Full */
-#define              RX_FIFO_FULL  0x20000    /* Receive FIFO Full */
-#define              TX_FIFO_ZERO  0x40000    /* Transmit FIFO Empty */
-#define               RX_DAT_ZERO  0x80000    /* Receive FIFO Empty */
-#define                TX_DAT_RDY  0x100000   /* Transmit Data Available */
-#define               RX_FIFO_RDY  0x200000   /* Receive Data Available */
-
-/* Bit masks for SDH_STATUS_CLR */
-
-#define         CMD_CRC_FAIL_STAT  0x1        /* CMD CRC Fail Status */
-#define         DAT_CRC_FAIL_STAT  0x2        /* Data CRC Fail Status */
-#define          CMD_TIMEOUT_STAT  0x4        /* CMD Time Out Status */
-#define          DAT_TIMEOUT_STAT  0x8        /* Data Time Out status */
-#define          TX_UNDERRUN_STAT  0x10       /* Transmit Underrun Status */
-#define           RX_OVERRUN_STAT  0x20       /* Receive Overrun Status */
-#define         CMD_RESP_END_STAT  0x40       /* CMD Response End Status */
-#define             CMD_SENT_STAT  0x80       /* CMD Sent Status */
-#define              DAT_END_STAT  0x100      /* Data End Status */
-#define        START_BIT_ERR_STAT  0x200      /* Start Bit Error Status */
-#define          DAT_BLK_END_STAT  0x400      /* Data Block End Status */
-
-/* Bit masks for SDH_MASK0 */
-
-#define         CMD_CRC_FAIL_MASK  0x1        /* CMD CRC Fail Mask */
-#define         DAT_CRC_FAIL_MASK  0x2        /* Data CRC Fail Mask */
-#define          CMD_TIMEOUT_MASK  0x4        /* CMD Time Out Mask */
-#define          DAT_TIMEOUT_MASK  0x8        /* Data Time Out Mask */
-#define          TX_UNDERRUN_MASK  0x10       /* Transmit Underrun Mask */
-#define           RX_OVERRUN_MASK  0x20       /* Receive Overrun Mask */
-#define         CMD_RESP_END_MASK  0x40       /* CMD Response End Mask */
-#define             CMD_SENT_MASK  0x80       /* CMD Sent Mask */
-#define              DAT_END_MASK  0x100      /* Data End Mask */
-#define        START_BIT_ERR_MASK  0x200      /* Start Bit Error Mask */
-#define          DAT_BLK_END_MASK  0x400      /* Data Block End Mask */
-#define              CMD_ACT_MASK  0x800      /* CMD Active Mask */
-#define               TX_ACT_MASK  0x1000     /* Transmit Active Mask */
-#define               RX_ACT_MASK  0x2000     /* Receive Active Mask */
-#define         TX_FIFO_STAT_MASK  0x4000     /* Transmit FIFO Status Mask */
-#define         RX_FIFO_STAT_MASK  0x8000     /* Receive FIFO Status Mask */
-#define         TX_FIFO_FULL_MASK  0x10000    /* Transmit FIFO Full Mask */
-#define         RX_FIFO_FULL_MASK  0x20000    /* Receive FIFO Full Mask */
-#define         TX_FIFO_ZERO_MASK  0x40000    /* Transmit FIFO Empty Mask */
-#define          RX_DAT_ZERO_MASK  0x80000    /* Receive FIFO Empty Mask */
-#define           TX_DAT_RDY_MASK  0x100000   /* Transmit Data Available Mask */
-#define          RX_FIFO_RDY_MASK  0x200000   /* Receive Data Available Mask */
-
-/* Bit masks for SDH_FIFO_CNT */
-
-#define                FIFO_COUNT  0x7fff     /* FIFO Count */
-
-/* Bit masks for SDH_E_STATUS */
-
-#define              SDIO_INT_DET  0x2        /* SDIO Int Detected */
-#define               SD_CARD_DET  0x10       /* SD Card Detect */
-
-/* Bit masks for SDH_E_MASK */
-
-#define                  SDIO_MSK  0x2        /* Mask SDIO Int Detected */
-#define                   SCD_MSK  0x40       /* Mask Card Detect */
-
-/* Bit masks for SDH_CFG */
-
-#define                   CLKS_EN  0x1        /* Clocks Enable */
-#define                      SD4E  0x4        /* SDIO 4-Bit Enable */
-#define                       MWE  0x8        /* Moving Window Enable */
-#define                    SD_RST  0x10       /* SDMMC Reset */
-#define                 PUP_SDDAT  0x20       /* Pull-up SD_DAT */
-#define                PUP_SDDAT3  0x40       /* Pull-up SD_DAT3 */
-#define                 PD_SDDAT3  0x80       /* Pull-down SD_DAT3 */
-
-/* Bit masks for SDH_RD_WAIT_EN */
-
-#define                       RWR  0x1        /* Read Wait Request */
-
 /* Bit masks for ATAPI_CONTROL */
 
 #define                 PIO_START  0x1        /* Start PIO/Reg Op */