powerpc: Remove UP only lazy floating point and vector optimisations

The UP only lazy floating point and vector optimisations were written
back when SMP was not common, and neither glibc nor gcc used vector
instructions. Now SMP is very common, glibc aggressively uses vector
instructions and gcc autovectorises.

We want to add new optimisations that apply to both UP and SMP, but
in preparation for that remove these UP only optimisations.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

9 files changed, 1 insertions, 304 deletions

diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index c273f3e0ba84..a2e891840806 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -88,12 +88,6 @@ struct task_struct;
 void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
 void release_thread(struct task_struct *);
 
-/* Lazy FPU handling on uni-processor */
-extern struct task_struct *last_task_used_math;
-extern struct task_struct *last_task_used_altivec;
-extern struct task_struct *last_task_used_vsx;
-extern struct task_struct *last_task_used_spe;
-
 #ifdef CONFIG_PPC32
 
 #if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 33a071d24ba8..bd1d93318350 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -27,14 +27,6 @@ extern void giveup_spe(struct task_struct *);
 extern void load_up_spe(struct task_struct *);
 extern void switch_booke_debug_regs(struct debug_reg *new_debug);
 
-#ifndef CONFIG_SMP
-extern void discard_lazy_cpu_state(void);
-#else
-static inline void discard_lazy_cpu_state(void)
-{
-}
-#endif
-
 #ifdef CONFIG_PPC_FPU
 extern void flush_fp_to_thread(struct task_struct *);
 extern void giveup_fpu(struct task_struct *);
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 38eb79b8a034..50d2352f2cf4 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -132,31 +132,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
-/*
- * For SMP, we don't do lazy FPU switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_fpu in switch_to.
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_math)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_math)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-	toreal(r4)
-	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	addi	r10,r4,THREAD_FPSTATE
-	SAVE_32FPVSRS(0, R5, R10)
-	mffs	fr0
-	stfd	fr0,FPSTATE_FPSCR(r10)
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	li	r10,MSR_FP|MSR_FE0|MSR_FE1
-	andc	r4,r4,r10		/* disable FP for previous task */
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	/* enable use of FP after return */
 #ifdef CONFIG_PPC32
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -175,11 +150,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	lfd	fr0,FPSTATE_FPSCR(r10)
 	MTFSF_L(fr0)
 	REST_32FPVSRS(0, R4, R10)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_math)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
 	blr
@@ -226,11 +196,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX)
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_math)
-	PPC_STL	r5,ADDROFF(last_task_used_math)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 /*
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index fffd1f96bb1d..ec936abbcadc 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -857,29 +857,6 @@ _GLOBAL(load_up_spe)
 	oris	r5,r5,MSR_SPE@h
 	mtmsr	r5			/* enable use of SPE now */
 	isync
-/*
- * For SMP, we don't do lazy SPE switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_spe in switch_to.
- */
-#ifndef CONFIG_SMP
-	lis	r3,last_task_used_spe@ha
-	lwz	r4,last_task_used_spe@l(r3)
-	cmpi	0,r4,0
-	beq	1f
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_spe */
-	SAVE_32EVRS(0,r10,r4,THREAD_EVR0)
-	evxor	evr10, evr10, evr10	/* clear out evr10 */
-	evmwumiaa evr10, evr10, evr10	/* evr10 <- ACC = 0 * 0 + ACC */
-	li	r5,THREAD_ACC
-	evstddx	evr10, r4, r5		/* save off accumulator */
-	lwz	r5,PT_REGS(r4)
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_SPE@h
-	andc	r4,r4,r10	/* disable SPE for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* !CONFIG_SMP */
 	/* enable use of SPE after return */
 	oris	r9,r9,MSR_SPE@h
 	mfspr	r5,SPRN_SPRG_THREAD	/* current task's THREAD (phys) */
@@ -889,10 +866,6 @@ _GLOBAL(load_up_spe)
 	evlddx	evr4,r10,r5
 	evmra	evr4,evr4
 	REST_32EVRS(0,r10,r5,THREAD_EVR0)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	stw	r4,last_task_used_spe@l(r3)
-#endif /* !CONFIG_SMP */
 	blr
 
 /*
@@ -1035,11 +1008,6 @@ _GLOBAL(giveup_spe)
 	andc	r4,r4,r3		/* disable SPE for previous task */
 	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_spe@ha
-	stw	r5,last_task_used_spe@l(r4)
-#endif /* !CONFIG_SMP */
 	blr
 #endif /* CONFIG_SPE */
 
diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
index 112ccf497562..cf4fb5429cf1 100644
--- a/arch/powerpc/kernel/idle_power7.S
+++ b/arch/powerpc/kernel/idle_power7.S
@@ -89,13 +89,6 @@ _GLOBAL(power7_powersave_common)
 	std	r0,_LINK(r1)
 	std	r0,_NIP(r1)
 
-#ifndef CONFIG_SMP
-	/* Make sure FPU, VSX etc... are flushed as we may lose
-	 * state when going to nap mode
-	 */
-	bl	discard_lazy_cpu_state
-#endif /* CONFIG_SMP */
-
 	/* Hard disable interrupts */
 	mfmsr	r9
 	rldicl	r9,r9,48,1
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 3aabed4a60a9..e098f4315643 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -67,13 +67,6 @@
 
 extern unsigned long _get_SP(void);
 
-#ifndef CONFIG_SMP
-struct task_struct *last_task_used_math = NULL;
-struct task_struct *last_task_used_altivec = NULL;
-struct task_struct *last_task_used_vsx = NULL;
-struct task_struct *last_task_used_spe = NULL;
-#endif
-
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
 void giveup_fpu_maybe_transactional(struct task_struct *tsk)
 {
@@ -134,16 +127,14 @@ void flush_fp_to_thread(struct task_struct *tsk)
 		 */
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_FP) {
-#ifdef CONFIG_SMP
 			/*
 			 * This should only ever be called for current or
 			 * for a stopped child process.  Since we save away
-			 * the FP register state on context switch on SMP,
+			 * the FP register state on context switch,
 			 * there is something wrong if a stopped child appears
 			 * to still have its FP state in the CPU registers.
 			 */
 			BUG_ON(tsk != current);
-#endif
 			giveup_fpu_maybe_transactional(tsk);
 		}
 		preempt_enable();
@@ -156,14 +147,10 @@ void enable_kernel_fp(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_FP))
 		giveup_fpu_maybe_transactional(current);
 	else
 		giveup_fpu(NULL);	/* just enables FP for kernel */
-#else
-	giveup_fpu_maybe_transactional(last_task_used_math);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
@@ -172,14 +159,10 @@ void enable_kernel_altivec(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VEC))
 		giveup_altivec_maybe_transactional(current);
 	else
 		giveup_altivec_notask();
-#else
-	giveup_altivec_maybe_transactional(last_task_used_altivec);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_altivec);
 
@@ -192,9 +175,7 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VEC) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			giveup_altivec_maybe_transactional(tsk);
 		}
 		preempt_enable();
@@ -208,14 +189,10 @@ void enable_kernel_vsx(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
 		giveup_vsx(current);
 	else
 		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
-#else
-	giveup_vsx(last_task_used_vsx);
-#endif /* CONFIG_SMP */
 }
 EXPORT_SYMBOL(enable_kernel_vsx);
 
@@ -232,9 +209,7 @@ void flush_vsx_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_VSX) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			giveup_vsx(tsk);
 		}
 		preempt_enable();
@@ -249,14 +224,10 @@ void enable_kernel_spe(void)
 {
 	WARN_ON(preemptible());
 
-#ifdef CONFIG_SMP
 	if (current->thread.regs && (current->thread.regs->msr & MSR_SPE))
 		giveup_spe(current);
 	else
 		giveup_spe(NULL);	/* just enable SPE for kernel - force */
-#else
-	giveup_spe(last_task_used_spe);
-#endif /* __SMP __ */
 }
 EXPORT_SYMBOL(enable_kernel_spe);
 
@@ -265,9 +236,7 @@ void flush_spe_to_thread(struct task_struct *tsk)
 	if (tsk->thread.regs) {
 		preempt_disable();
 		if (tsk->thread.regs->msr & MSR_SPE) {
-#ifdef CONFIG_SMP
 			BUG_ON(tsk != current);
-#endif
 			tsk->thread.spefscr = mfspr(SPRN_SPEFSCR);
 			giveup_spe(tsk);
 		}
@@ -276,32 +245,6 @@ void flush_spe_to_thread(struct task_struct *tsk)
 }
 #endif /* CONFIG_SPE */
 
-#ifndef CONFIG_SMP
-/*
- * If we are doing lazy switching of CPU state (FP, altivec or SPE),
- * and the current task has some state, discard it.
- */
-void discard_lazy_cpu_state(void)
-{
-	preempt_disable();
-	if (last_task_used_math == current)
-		last_task_used_math = NULL;
-#ifdef CONFIG_ALTIVEC
-	if (last_task_used_altivec == current)
-		last_task_used_altivec = NULL;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (last_task_used_vsx == current)
-		last_task_used_vsx = NULL;
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	if (last_task_used_spe == current)
-		last_task_used_spe = NULL;
-#endif
-	preempt_enable();
-}
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 void do_send_trap(struct pt_regs *regs, unsigned long address,
 		  unsigned long error_code, int signal_code, int breakpt)
@@ -831,30 +774,9 @@ struct task_struct *__switch_to(struct task_struct *prev,
 
 	__switch_to_tm(prev);
 
-#ifdef CONFIG_SMP
-	/* avoid complexity of lazy save/restore of fpu
-	 * by just saving it every time we switch out if
-	 * this task used the fpu during the last quantum.
-	 *
-	 * If it tries to use the fpu again, it'll trap and
-	 * reload its fp regs.  So we don't have to do a restore
-	 * every switch, just a save.
-	 *  -- Cort
-	 */
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_FP))
 		giveup_fpu(prev);
 #ifdef CONFIG_ALTIVEC
-	/*
-	 * If the previous thread used altivec in the last quantum
-	 * (thus changing altivec regs) then save them.
-	 * We used to check the VRSAVE register but not all apps
-	 * set it, so we don't rely on it now (and in fact we need
-	 * to save & restore VSCR even if VRSAVE == 0).  -- paulus
-	 *
-	 * On SMP we always save/restore altivec regs just to avoid the
-	 * complexity of changing processors.
-	 *  -- Cort
-	 */
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
@@ -864,39 +786,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 		__giveup_vsx(prev);
 #endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
-	/*
-	 * If the previous thread used spe in the last quantum
-	 * (thus changing spe regs) then save them.
-	 *
-	 * On SMP we always save/restore spe regs just to avoid the
-	 * complexity of changing processors.
-	 */
 	if ((prev->thread.regs && (prev->thread.regs->msr & MSR_SPE)))
 		giveup_spe(prev);
 #endif /* CONFIG_SPE */
 
-#else  /* CONFIG_SMP */
-#ifdef CONFIG_ALTIVEC
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_altivec -- Cort
-	 */
-	if (new->thread.regs && last_task_used_altivec == new)
-		new->thread.regs->msr |= MSR_VEC;
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_VSX
-	if (new->thread.regs && last_task_used_vsx == new)
-		new->thread.regs->msr |= MSR_VSX;
-#endif /* CONFIG_VSX */
-#ifdef CONFIG_SPE
-	/* Avoid the trap.  On smp this this never happens since
-	 * we don't set last_task_used_spe
-	 */
-	if (new->thread.regs && last_task_used_spe == new)
-		new->thread.regs->msr |= MSR_SPE;
-#endif /* CONFIG_SPE */
-
-#endif /* CONFIG_SMP */
-
 #ifdef CONFIG_PPC_ADV_DEBUG_REGS
 	switch_booke_debug_regs(&new->thread.debug);
 #else
@@ -1111,13 +1004,10 @@ void show_regs(struct pt_regs * regs)
 
 void exit_thread(void)
 {
-	discard_lazy_cpu_state();
 }
 
 void flush_thread(void)
 {
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_HAVE_HW_BREAKPOINT
 	flush_ptrace_hw_breakpoint(current);
 #else /* CONFIG_HAVE_HW_BREAKPOINT */
@@ -1355,7 +1245,6 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 		regs->msr = MSR_USER32;
 	}
 #endif
-	discard_lazy_cpu_state();
 #ifdef CONFIG_VSX
 	current->thread.used_vsr = 0;
 #endif
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index 0dbee465af7a..3cd7a32c8ff4 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -687,15 +687,6 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	/*
 	 * Force the process to reload the altivec registers from
@@ -798,15 +789,6 @@ static long restore_tm_user_regs(struct pt_regs *regs,
 	/* Restore the previous little-endian mode */
 	regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
 
-	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr/evr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec/SPE, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
 #ifdef CONFIG_ALTIVEC
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index 20756dfb9f34..6f2b555516e6 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -350,15 +350,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 		err |=  __get_user(set->sig[0], &sc->oldmask);
 
 	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
-	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
@@ -465,15 +456,6 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
 	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
 	/*
-	 * Do this before updating the thread state in
-	 * current->thread.fpr/vr.  That way, if we get preempted
-	 * and another task grabs the FPU/Altivec, it won't be
-	 * tempted to save the current CPU state into the thread_struct
-	 * and corrupt what we are writing there.
-	 */
-	discard_lazy_cpu_state();
-
-	/*
 	 * Force reload of FP/VEC.
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
diff --git a/arch/powerpc/kernel/vector.S b/arch/powerpc/kernel/vector.S
index 1c5425966204..1757c0c936c1 100644
--- a/arch/powerpc/kernel/vector.S
+++ b/arch/powerpc/kernel/vector.S
@@ -80,39 +80,6 @@ _GLOBAL(load_up_altivec)
 	MTMSRD(r5)			/* enable use of AltiVec now */
 	isync
 
-/*
- * For SMP, we don't do lazy VMX switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altvec in switch_to.
- * VRSAVE isn't dealt with here, that is done in the normal context
- * switch code. Note that we could rely on vrsave value to eventually
- * avoid saving all of the VREGs here...
- */
-#ifndef CONFIG_SMP
-	LOAD_REG_ADDRBASE(r3, last_task_used_altivec)
-	toreal(r3)
-	PPC_LL	r4,ADDROFF(last_task_used_altivec)(r3)
-	PPC_LCMPI	0,r4,0
-	beq	1f
-
-	/* Save VMX state to last_task_used_altivec's THREAD struct */
-	toreal(r4)
-	addi	r4,r4,THREAD
-	addi	r6,r4,THREAD_VRSTATE
-	SAVE_32VRS(0,r5,r6)
-	mfvscr	v0
-	li	r10,VRSTATE_VSCR
-	stvx	v0,r10,r6
-	/* Disable VMX for last_task_used_altivec */
-	PPC_LL	r5,PT_REGS(r4)
-	toreal(r5)
-	PPC_LL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10
-	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-
 	/* Hack: if we get an altivec unavailable trap with VRSAVE
 	 * set to all zeros, we assume this is a broken application
 	 * that fails to set it properly, and thus we switch it to
@@ -141,12 +108,6 @@ _GLOBAL(load_up_altivec)
 	lvx	v0,r10,r6
 	mtvscr	v0
 	REST_32VRS(0,r4,r6)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_altivec to 'current' */
-	subi	r4,r5,THREAD		/* Back to 'current' */
-	fromreal(r4)
-	PPC_STL	r4,ADDROFF(last_task_used_altivec)(r3)
-#endif /* CONFIG_SMP */
 	/* restore registers and return */
 	blr
 
@@ -199,11 +160,6 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX)
 	andc	r4,r4,r3		/* disable FP for previous task */
 	PPC_STL	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	LOAD_REG_ADDRBASE(r4,last_task_used_altivec)
-	PPC_STL	r5,ADDROFF(last_task_used_altivec)(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 #ifdef CONFIG_VSX
@@ -226,20 +182,6 @@ _GLOBAL(load_up_vsx)
 	andis.	r5,r12,MSR_VEC@h
 	beql+	load_up_altivec		/* skip if already loaded */
 
-#ifndef CONFIG_SMP
-	ld	r3,last_task_used_vsx@got(r2)
-	ld	r4,0(r3)
-	cmpdi	0,r4,0
-	beq	1f
-	/* Disable VSX for last_task_used_vsx */
-	addi	r4,r4,THREAD
-	ld	r5,PT_REGS(r4)
-	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r6,MSR_VSX@h
-	andc	r6,r4,r6
-	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
 	ld	r4,PACACURRENT(r13)
 	addi	r4,r4,THREAD		/* Get THREAD */
 	li	r6,1
@@ -247,11 +189,6 @@ _GLOBAL(load_up_vsx)
 	/* enable use of VSX after return */
 	oris	r12,r12,MSR_VSX@h
 	std	r12,_MSR(r1)
-#ifndef CONFIG_SMP
-	/* Update last_task_used_vsx to 'current' */
-	ld	r4,PACACURRENT(r13)
-	std	r4,0(r3)
-#endif /* CONFIG_SMP */
 	b	fast_exception_return
 
 /*
@@ -277,11 +214,6 @@ _GLOBAL(__giveup_vsx)
 	andc	r4,r4,r3		/* disable VSX for previous task */
 	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
 1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	ld	r4,last_task_used_vsx@got(r2)
-	std	r5,0(r4)
-#endif /* CONFIG_SMP */
 	blr
 
 #endif /* CONFIG_VSX */