Merge branch 'for-usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci

* 'for-usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  Intel xhci: Limit number of active endpoints to 64.
  Intel xhci: Ignore spurious successful event.
  Intel xhci: Support EHCI/xHCI port switching.
  Intel xhci: Add PCI id for Panther Point xHCI host.
  xhci: STFU: Be quieter during URB submission and completion.
  xhci: STFU: Don't print event ring dequeue pointer.
  xhci: STFU: Remove function tracing.
  xhci: Don't submit commands when the host is dead.
  xhci: Clear stopped_td when Stop Endpoint command completes.

8 files changed, 413 insertions, 69 deletions

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 660b80a75cac..1102ce65a3a9 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -348,11 +348,50 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 	return rc;
 }
 
+static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
+{
+	return pdev->class == PCI_CLASS_SERIAL_USB_EHCI &&
+		pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == 0x1E26;
+}
+
+static void ehci_enable_xhci_companion(void)
+{
+	struct pci_dev		*companion = NULL;
+
+	/* The xHCI and EHCI controllers are not on the same PCI slot */
+	for_each_pci_dev(companion) {
+		if (!usb_is_intel_switchable_xhci(companion))
+			continue;
+		usb_enable_xhci_ports(companion);
+		return;
+	}
+}
+
 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 
+	/* The BIOS on systems with the Intel Panther Point chipset may or may
+	 * not support xHCI natively.  That means that during system resume, it
+	 * may switch the ports back to EHCI so that users can use their
+	 * keyboard to select a kernel from GRUB after resume from hibernate.
+	 *
+	 * The BIOS is supposed to remember whether the OS had xHCI ports
+	 * enabled before resume, and switch the ports back to xHCI when the
+	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+	 * writers.
+	 *
+	 * Unconditionally switch the ports back to xHCI after a system resume.
+	 * We can't tell whether the EHCI or xHCI controller will be resumed
+	 * first, so we have to do the port switchover in both drivers.  Writing
+	 * a '1' to the port switchover registers should have no effect if the
+	 * port was already switched over.
+	 */
+	if (usb_is_intel_switchable_ehci(pdev))
+		ehci_enable_xhci_companion();
+
 	// maybe restore FLADJ
 
 	if (time_before(jiffies, ehci->next_statechange))
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index f16c59d5f487..fd930618c28f 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -69,6 +69,9 @@
 #define	NB_PIF0_PWRDOWN_0	0x01100012
 #define	NB_PIF0_PWRDOWN_1	0x01100013
 
+#define USB_INTEL_XUSB2PR      0xD0
+#define USB_INTEL_USB3_PSSEN   0xD8
+
 static struct amd_chipset_info {
 	struct pci_dev	*nb_dev;
 	struct pci_dev	*smbus_dev;
@@ -673,6 +676,64 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done,
 	return -ETIMEDOUT;
 }
 
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev)
+{
+	return pdev->class == PCI_CLASS_SERIAL_USB_XHCI &&
+		pdev->vendor == PCI_VENDOR_ID_INTEL &&
+		pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI;
+}
+EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci);
+
+/*
+ * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that
+ * share some number of ports.  These ports can be switched between either
+ * controller.  Not all of the ports under the EHCI host controller may be
+ * switchable.
+ *
+ * The ports should be switched over to xHCI before PCI probes for any device
+ * start.  This avoids active devices under EHCI being disconnected during the
+ * port switchover, which could cause loss of data on USB storage devices, or
+ * failed boot when the root file system is on a USB mass storage device and is
+ * enumerated under EHCI first.
+ *
+ * We write into the xHC's PCI configuration space in some Intel-specific
+ * registers to switch the ports over.  The USB 3.0 terminations and the USB
+ * 2.0 data wires are switched separately.  We want to enable the SuperSpeed
+ * terminations before switching the USB 2.0 wires over, so that USB 3.0
+ * devices connect at SuperSpeed, rather than at USB 2.0 speeds.
+ */
+void usb_enable_xhci_ports(struct pci_dev *xhci_pdev)
+{
+	u32		ports_available;
+
+	ports_available = 0xffffffff;
+	/* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable
+	 * Register, to turn on SuperSpeed terminations for all
+	 * available ports.
+	 */
+	pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+			cpu_to_le32(ports_available));
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN,
+			&ports_available);
+	dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled "
+			"under xHCI: 0x%x\n", ports_available);
+
+	ports_available = 0xffffffff;
+	/* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to
+	 * switch the USB 2.0 power and data lines over to the xHCI
+	 * host.
+	 */
+	pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+			cpu_to_le32(ports_available));
+
+	pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR,
+			&ports_available);
+	dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over "
+			"to xHCI: 0x%x\n", ports_available);
+}
+EXPORT_SYMBOL_GPL(usb_enable_xhci_ports);
+
 /**
  * PCI Quirks for xHCI.
  *
@@ -732,6 +793,8 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev)
 	writel(XHCI_LEGACY_DISABLE_SMI,
 			base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET);
 
+	if (usb_is_intel_switchable_xhci(pdev))
+		usb_enable_xhci_ports(pdev);
 hc_init:
 	op_reg_base = base + XHCI_HC_LENGTH(readl(base));
 
diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
index 6ae9f78e9938..b1002a8ef96f 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -8,6 +8,8 @@ int usb_amd_find_chipset_info(void);
 void usb_amd_dev_put(void);
 void usb_amd_quirk_pll_disable(void);
 void usb_amd_quirk_pll_enable(void);
+bool usb_is_intel_switchable_xhci(struct pci_dev *pdev);
+void usb_enable_xhci_ports(struct pci_dev *xhci_pdev);
 #else
 static inline void usb_amd_quirk_pll_disable(void) {}
 static inline void usb_amd_quirk_pll_enable(void) {}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index cbc4d491e626..c408e9f6a707 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -118,6 +118,12 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 	/* AMD PLL quirk */
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
+		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
+		xhci->limit_active_eps = 64;
+	}
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
@@ -242,8 +248,28 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 {
 	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
+	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval = 0;
 
+	/* The BIOS on systems with the Intel Panther Point chipset may or may
+	 * not support xHCI natively.  That means that during system resume, it
+	 * may switch the ports back to EHCI so that users can use their
+	 * keyboard to select a kernel from GRUB after resume from hibernate.
+	 *
+	 * The BIOS is supposed to remember whether the OS had xHCI ports
+	 * enabled before resume, and switch the ports back to xHCI when the
+	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
+	 * writers.
+	 *
+	 * Unconditionally switch the ports back to xHCI after a system resume.
+	 * We can't tell whether the EHCI or xHCI controller will be resumed
+	 * first, so we have to do the port switchover in both drivers.  Writing
+	 * a '1' to the port switchover registers should have no effect if the
+	 * port was already switched over.
+	 */
+	if (usb_is_intel_switchable_xhci(pdev))
+		usb_enable_xhci_ports(pdev);
+
 	retval = xhci_resume(xhci, hibernated);
 	return retval;
 }
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 237a765f8d18..cc1485bfed38 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -167,12 +167,6 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 		next = ring->dequeue;
 	}
 	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
-	if (ring == xhci->event_ring)
-		xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
-	else if (ring == xhci->cmd_ring)
-		xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
-	else
-		xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -248,12 +242,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
 		next = ring->enqueue;
 	}
 	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
-	if (ring == xhci->event_ring)
-		xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
-	else if (ring == xhci->cmd_ring)
-		xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
-	else
-		xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -636,13 +624,11 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
 			}
 		}
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
-		xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb);
 
 		spin_unlock(&xhci->lock);
 		usb_hcd_giveback_urb(hcd, urb, status);
 		xhci_urb_free_priv(xhci, urb_priv);
 		spin_lock(&xhci->lock);
-		xhci_dbg(xhci, "%s URB given back\n", adjective);
 	}
 }
 
@@ -692,6 +678,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 
 	if (list_empty(&ep->cancelled_td_list)) {
 		xhci_stop_watchdog_timer_in_irq(xhci, ep);
+		ep->stopped_td = NULL;
+		ep->stopped_trb = NULL;
 		ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
 		return;
 	}
@@ -1093,8 +1081,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 		complete(&xhci->addr_dev);
 		break;
 	case TRB_TYPE(TRB_DISABLE_SLOT):
-		if (xhci->devs[slot_id])
+		if (xhci->devs[slot_id]) {
+			if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
+				/* Delete default control endpoint resources */
+				xhci_free_device_endpoint_resources(xhci,
+						xhci->devs[slot_id], true);
 			xhci_free_virt_device(xhci, slot_id);
+		}
 		break;
 	case TRB_TYPE(TRB_CONFIG_EP):
 		virt_dev = xhci->devs[slot_id];
@@ -1630,7 +1623,6 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td,
 					"without IOC set??\n");
 			*status = -ESHUTDOWN;
 		} else {
-			xhci_dbg(xhci, "Successful control transfer!\n");
 			*status = 0;
 		}
 		break;
@@ -1727,7 +1719,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	switch (trb_comp_code) {
 	case COMP_SUCCESS:
 		frame->status = 0;
-		xhci_dbg(xhci, "Successful isoc transfer!\n");
 		break;
 	case COMP_SHORT_TX:
 		frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
@@ -1837,12 +1828,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 			else
 				*status = 0;
 		} else {
-			if (usb_endpoint_xfer_bulk(&td->urb->ep->desc))
-				xhci_dbg(xhci, "Successful bulk "
-						"transfer!\n");
-			else
-				xhci_dbg(xhci, "Successful interrupt "
-						"transfer!\n");
 			*status = 0;
 		}
 		break;
@@ -1856,11 +1841,12 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		/* Others already handled above */
 		break;
 	}
-	xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
-			"%d bytes untransferred\n",
-			td->urb->ep->desc.bEndpointAddress,
-			td->urb->transfer_buffer_length,
-		 TRB_LEN(le32_to_cpu(event->transfer_len)));
+	if (trb_comp_code == COMP_SHORT_TX)
+		xhci_dbg(xhci, "ep %#x - asked for %d bytes, "
+				"%d bytes untransferred\n",
+				td->urb->ep->desc.bEndpointAddress,
+				td->urb->transfer_buffer_length,
+				TRB_LEN(le32_to_cpu(event->transfer_len)));
 	/* Fast path - was this the last TRB in the TD for this URB? */
 	if (event_trb == td->last_trb) {
 		if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
@@ -1954,7 +1940,6 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 
 	/* Endpoint ID is 1 based, our index is zero based */
 	ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
-	xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
 	ep = &xdev->eps[ep_index];
 	ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
 	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
@@ -2081,6 +2066,16 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		if (!event_seg) {
 			if (!ep->skip ||
 			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
+				/* Some host controllers give a spurious
+				 * successful event after a short transfer.
+				 * Ignore it.
+				 */
+				if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && 
+						ep_ring->last_td_was_short) {
+					ep_ring->last_td_was_short = false;
+					ret = 0;
+					goto cleanup;
+				}
 				/* HC is busted, give up! */
 				xhci_err(xhci,
 					"ERROR Transfer event TRB DMA ptr not "
@@ -2091,6 +2086,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			ret = skip_isoc_td(xhci, td, event, ep, &status);
 			goto cleanup;
 		}
+		if (trb_comp_code == COMP_SHORT_TX)
+			ep_ring->last_td_was_short = true;
+		else
+			ep_ring->last_td_was_short = false;
 
 		if (ep->skip) {
 			xhci_dbg(xhci, "Found td. Clear skip flag.\n");
@@ -2149,9 +2148,15 @@ cleanup:
 				xhci_urb_free_priv(xhci, urb_priv);
 
 			usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
-			xhci_dbg(xhci, "Giveback URB %p, len = %d, "
-					"status = %d\n",
-					urb, urb->actual_length, status);
+			if ((urb->actual_length != urb->transfer_buffer_length &&
+						(urb->transfer_flags &
+						 URB_SHORT_NOT_OK)) ||
+					status != 0)
+				xhci_dbg(xhci, "Giveback URB %p, len = %d, "
+						"expected = %x, status = %d\n",
+						urb, urb->actual_length,
+						urb->transfer_buffer_length,
+						status);
 			spin_unlock(&xhci->lock);
 			usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
 			spin_lock(&xhci->lock);
@@ -2180,7 +2185,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
 	int update_ptrs = 1;
 	int ret;
 
-	xhci_dbg(xhci, "In %s\n", __func__);
 	if (!xhci->event_ring || !xhci->event_ring->dequeue) {
 		xhci->error_bitmask |= 1 << 1;
 		return 0;
@@ -2193,7 +2197,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
 		xhci->error_bitmask |= 1 << 2;
 		return 0;
 	}
-	xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
 
 	/*
 	 * Barrier between reading the TRB_CYCLE (valid) flag above and any
@@ -2203,20 +2206,14 @@ static int xhci_handle_event(struct xhci_hcd *xhci)
 	/* FIXME: Handle more event types. */
 	switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) {
 	case TRB_TYPE(TRB_COMPLETION):
-		xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
 		handle_cmd_completion(xhci, &event->event_cmd);
-		xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
 		break;
 	case TRB_TYPE(TRB_PORT_STATUS):
-		xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
 		handle_port_status(xhci, event);
-		xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
 		update_ptrs = 0;
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
-		xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
 		ret = handle_tx_event(xhci, &event->trans_event);
-		xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
 		if (ret < 0)
 			xhci->error_bitmask |= 1 << 9;
 		else
@@ -2273,16 +2270,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 		spin_unlock(&xhci->lock);
 		return IRQ_NONE;
 	}
-	xhci_dbg(xhci, "op reg status = %08x\n", status);
-	xhci_dbg(xhci, "Event ring dequeue ptr:\n");
-	xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
-		 (unsigned long long)
-		 xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
-		 lower_32_bits(le64_to_cpu(trb->link.segment_ptr)),
-		 upper_32_bits(le64_to_cpu(trb->link.segment_ptr)),
-		 (unsigned int) le32_to_cpu(trb->link.intr_target),
-		 (unsigned int) le32_to_cpu(trb->link.control));
-
 	if (status & STS_FATAL) {
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
@@ -2397,7 +2384,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
 {
 	/* Make sure the endpoint has been added to xHC schedule */
-	xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state);
 	switch (ep_state) {
 	case EP_STATE_DISABLED:
 		/*
@@ -2434,7 +2420,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		struct xhci_ring *ring = ep_ring;
 		union xhci_trb *next;
 
-		xhci_dbg(xhci, "prepare_ring: pointing to link trb\n");
 		next = ring->enqueue;
 
 		while (last_trb(xhci, ring, ring->enq_seg, next)) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8f2a56ece44f..d9660eb97eb9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1314,8 +1314,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	if (ret <= 0)
 		return ret;
 	xhci = hcd_to_xhci(hcd);
-	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
 
+	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
 	drop_flag = xhci_get_endpoint_flag(&ep->desc);
 	if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) {
 		xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n",
@@ -1401,6 +1403,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return ret;
 	}
 	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
 
 	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
 	last_ctx = xhci_last_valid_endpoint(added_ctxs);
@@ -1578,6 +1582,113 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
 	return ret;
 }
 
+static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+	/* Ignore the slot flag (bit 0), and the default control endpoint flag
+	 * (bit 1).  The default control endpoint is added during the Address
+	 * Device command and is never removed until the slot is disabled.
+	 */
+	valid_add_flags = ctrl_ctx->add_flags >> 2;
+	valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+	/* Use hweight32 to count the number of ones in the add flags, or
+	 * number of endpoints added.  Don't count endpoints that are changed
+	 * (both added and dropped).
+	 */
+	return hweight32(valid_add_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx)
+{
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u32 valid_add_flags;
+	u32 valid_drop_flags;
+
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
+	valid_add_flags = ctrl_ctx->add_flags >> 2;
+	valid_drop_flags = ctrl_ctx->drop_flags >> 2;
+
+	return hweight32(valid_drop_flags) -
+		hweight32(valid_add_flags & valid_drop_flags);
+}
+
+/*
+ * We need to reserve the new number of endpoints before the configure endpoint
+ * command completes.  We can't subtract the dropped endpoints from the number
+ * of active endpoints until the command completes because we can oversubscribe
+ * the host in this case:
+ *
+ *  - the first configure endpoint command drops more endpoints than it adds
+ *  - a second configure endpoint command that adds more endpoints is queued
+ *  - the first configure endpoint command fails, so the config is unchanged
+ *  - the second command may succeed, even though there isn't enough resources
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_resources(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx)
+{
+	u32 added_eps;
+
+	added_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+	if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) {
+		xhci_dbg(xhci, "Not enough ep ctxs: "
+				"%u active, need to add %u, limit is %u.\n",
+				xhci->num_active_eps, added_eps,
+				xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += added_eps;
+	xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps,
+			xhci->num_active_eps);
+	return 0;
+}
+
+/*
+ * The configure endpoint was failed by the xHC for some other reason, so we
+ * need to revert the resources that failed configuration would have used.
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_free_host_resources(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx)
+{
+	u32 num_failed_eps;
+
+	num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx);
+	xhci->num_active_eps -= num_failed_eps;
+	xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n",
+			num_failed_eps,
+			xhci->num_active_eps);
+}
+
+/*
+ * Now that the command has completed, clean up the active endpoint count by
+ * subtracting out the endpoints that were dropped (but not changed).
+ *
+ * Must be called with xhci->lock held.
+ */
+static void xhci_finish_resource_reservation(struct xhci_hcd *xhci,
+		struct xhci_container_ctx *in_ctx)
+{
+	u32 num_dropped_eps;
+
+	num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx);
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n",
+				num_dropped_eps,
+				xhci->num_active_eps);
+}
+
 /* Issue a configure endpoint command or evaluate context command
  * and wait for it to finish.
  */
@@ -1598,6 +1709,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	virt_dev = xhci->devs[udev->slot_id];
 	if (command) {
 		in_ctx = command->in_ctx;
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+				xhci_reserve_host_resources(xhci, in_ctx)) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_warn(xhci, "Not enough host resources, "
+					"active endpoint contexts = %u\n",
+					xhci->num_active_eps);
+			return -ENOMEM;
+		}
+
 		cmd_completion = command->completion;
 		cmd_status = &command->status;
 		command->command_trb = xhci->cmd_ring->enqueue;
@@ -1613,6 +1733,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 		list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
 	} else {
 		in_ctx = virt_dev->in_ctx;
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) &&
+				xhci_reserve_host_resources(xhci, in_ctx)) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_warn(xhci, "Not enough host resources, "
+					"active endpoint contexts = %u\n",
+					xhci->num_active_eps);
+			return -ENOMEM;
+		}
 		cmd_completion = &virt_dev->cmd_completion;
 		cmd_status = &virt_dev->cmd_status;
 	}
@@ -1627,6 +1755,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	if (ret < 0) {
 		if (command)
 			list_del(&command->cmd_list);
+		if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK))
+			xhci_free_host_resources(xhci, in_ctx);
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME allocate a new ring segment\n");
 		return -ENOMEM;
@@ -1649,8 +1779,22 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
 	}
 
 	if (!ctx_change)
-		return xhci_configure_endpoint_result(xhci, udev, cmd_status);
-	return xhci_evaluate_context_result(xhci, udev, cmd_status);
+		ret = xhci_configure_endpoint_result(xhci, udev, cmd_status);
+	else
+		ret = xhci_evaluate_context_result(xhci, udev, cmd_status);
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* If the command failed, remove the reserved resources.
+		 * Otherwise, clean up the estimate to include dropped eps.
+		 */
+		if (ret)
+			xhci_free_host_resources(xhci, in_ctx);
+		else
+			xhci_finish_resource_reservation(xhci, in_ctx);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	return ret;
 }
 
 /* Called after one or more calls to xhci_add_endpoint() or
@@ -1676,6 +1820,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	if (ret <= 0)
 		return ret;
 	xhci = hcd_to_xhci(hcd);
+	if (xhci->xhc_state & XHCI_STATE_DYING)
+		return -ENODEV;
 
 	xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev);
 	virt_dev = xhci->devs[udev->slot_id];
@@ -2266,6 +2412,34 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
 }
 
 /*
+ * Deletes endpoint resources for endpoints that were active before a Reset
+ * Device command, or a Disable Slot command.  The Reset Device command leaves
+ * the control endpoint intact, whereas the Disable Slot command deletes it.
+ *
+ * Must be called with xhci->lock held.
+ */
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+	struct xhci_virt_device *virt_dev, bool drop_control_ep)
+{
+	int i;
+	unsigned int num_dropped_eps = 0;
+	unsigned int drop_flags = 0;
+
+	for (i = (drop_control_ep ? 0 : 1); i < 31; i++) {
+		if (virt_dev->eps[i].ring) {
+			drop_flags |= 1 << i;
+			num_dropped_eps++;
+		}
+	}
+	xhci->num_active_eps -= num_dropped_eps;
+	if (num_dropped_eps)
+		xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, "
+				"%u now active.\n",
+				num_dropped_eps, drop_flags,
+				xhci->num_active_eps);
+}
+
+/*
  * This submits a Reset Device Command, which will set the device state to 0,
  * set the device address to 0, and disable all the endpoints except the default
  * control endpoint.  The USB core should come back and call
@@ -2406,6 +2580,14 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
 		goto command_cleanup;
 	}
 
+	/* Free up host controller endpoint resources */
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		/* Don't delete the default control endpoint resources */
+		xhci_free_device_endpoint_resources(xhci, virt_dev, false);
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+
 	/* Everything but endpoint 0 is disabled, so free or cache the rings. */
 	last_freed_endpoint = 1;
 	for (i = 1; i < 31; ++i) {
@@ -2479,6 +2661,27 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
 }
 
 /*
+ * Checks if we have enough host controller resources for the default control
+ * endpoint.
+ *
+ * Must be called with xhci->lock held.
+ */
+static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci)
+{
+	if (xhci->num_active_eps + 1 > xhci->limit_active_eps) {
+		xhci_dbg(xhci, "Not enough ep ctxs: "
+				"%u active, need to add 1, limit is %u.\n",
+				xhci->num_active_eps, xhci->limit_active_eps);
+		return -ENOMEM;
+	}
+	xhci->num_active_eps += 1;
+	xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n",
+			xhci->num_active_eps);
+	return 0;
+}
+
+
+/*
  * Returns 0 if the xHC ran out of device slots, the Enable Slot command
  * timed out, or allocating memory failed.  Returns 1 on success.
  */
@@ -2513,24 +2716,39 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev)
 		xhci_err(xhci, "Error while assigning device slot ID\n");
 		return 0;
 	}
-	/* xhci_alloc_virt_device() does not touch rings; no need to lock.
-	 * Use GFP_NOIO, since this function can be called from
+
+	if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) {
+		spin_lock_irqsave(&xhci->lock, flags);
+		ret = xhci_reserve_host_control_ep_resources(xhci);
+		if (ret) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			xhci_warn(xhci, "Not enough host resources, "
+					"active endpoint contexts = %u\n",
+					xhci->num_active_eps);
+			goto disable_slot;
+		}
+		spin_unlock_irqrestore(&xhci->lock, flags);
+	}
+	/* Use GFP_NOIO, since this function can be called from
 	 * xhci_discover_or_reset_device(), which may be called as part of
 	 * mass storage driver error handling.
 	 */
 	if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
-		/* Disable slot, if we can do it without mem alloc */
 		xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-		spin_lock_irqsave(&xhci->lock, flags);
-		if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
-			xhci_ring_cmd_db(xhci);
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		return 0;
+		goto disable_slot;
 	}
 	udev->slot_id = xhci->slot_id;
 	/* Is this a LS or FS device under a HS hub? */
 	/* Hub or peripherial? */
 	return 1;
+
+disable_slot:
+	/* Disable slot, if we can do it without mem alloc */
+	spin_lock_irqsave(&xhci->lock, flags);
+	if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id))
+		xhci_ring_cmd_db(xhci);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return 0;
 }
 
 /*
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index e12db7cfb9bb..ac0196e7fcf1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1123,6 +1123,7 @@ struct xhci_ring {
 	 */
 	u32			cycle_state;
 	unsigned int		stream_id;
+	bool			last_td_was_short;
 };
 
 struct xhci_erst_entry {
@@ -1290,6 +1291,19 @@ struct xhci_hcd {
 #define XHCI_RESET_EP_QUIRK	(1 << 1)
 #define XHCI_NEC_HOST		(1 << 2)
 #define XHCI_AMD_PLL_FIX	(1 << 3)
+#define XHCI_SPURIOUS_SUCCESS	(1 << 4)
+/*
+ * Certain Intel host controllers have a limit to the number of endpoint
+ * contexts they can handle.  Ideally, they would signal that they can't handle
+ * anymore endpoint contexts by returning a Resource Error for the Configure
+ * Endpoint command, but they don't.  Instead they expect software to keep track
+ * of the number of active endpoints for them, across configure endpoint
+ * commands, reset device commands, disable slot commands, and address device
+ * commands.
+ */
+#define XHCI_EP_LIMIT_QUIRK	(1 << 5)
+	unsigned int		num_active_eps;
+	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
 	struct xhci_bus_state   bus_state[2];
 	/* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
@@ -1338,9 +1352,6 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
 static inline void xhci_writel(struct xhci_hcd *xhci,
 		const unsigned int val, __le32 __iomem *regs)
 {
-	xhci_dbg(xhci,
-			"`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
-			regs, val);
 	writel(val, regs);
 }
 
@@ -1368,9 +1379,6 @@ static inline void xhci_write_64(struct xhci_hcd *xhci,
 	u32 val_lo = lower_32_bits(val);
 	u32 val_hi = upper_32_bits(val);
 
-	xhci_dbg(xhci,
-			"`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
-			regs, (long unsigned int) val);
 	writel(val_lo, ptr);
 	writel(val_hi, ptr + 1);
 }
@@ -1439,6 +1447,8 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
 void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
 		struct xhci_ep_ctx *ep_ctx,
 		struct xhci_virt_ep *ep);
+void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
+	struct xhci_virt_device *virt_dev, bool drop_control_ep);
 struct xhci_ring *xhci_dma_to_transfer_ring(
 		struct xhci_virt_ep *ep,
 		u64 address);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 24787b751286..a311008af5e1 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2483,6 +2483,7 @@
 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX	0x1c5f
 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0	0x1d40
 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1	0x1d41
+#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI	0x1e31
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN	0x1e40
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX	0x1e5f
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN	0x2310