Revert "dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings"

This reverts commit 3fe59cc4ff641b106cc24930204d4cd2c82f318f.
The bindings were not properly reviewed and were also
causing errors in the automatic checkers once applied.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 195 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
deleted file mode 100644
index 58dd34f4fcb5..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
+++ /dev/null
@@ -1,195 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Technologies, Inc. SDX65 TLMM block
-
-maintainers:
-  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
-
-description:
-  This binding describes the Top Level Mode Multiplexer block found in the
-  SDX65 platform.
-
-properties:
-  compatible:
-    const: qcom,sdx65-tlmm
-
-  reg:
-    description: Specifies the base address and size of the TLMM register space
-    maxItems: 1
-
-  interrupts:
-    description: Specifies the TLMM summary IRQ
-    maxItems: 1
-
-  interrupt-controller: true
-
-  '#interrupt-cells':
-    description: Specifies the PIN numbers and Flags, as defined in
-      include/dt-bindings/interrupt-controller/irq.h
-    const: 2
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-  gpio-reserved-ranges:
-    maxItems: 1
-
-#PIN CONFIGURATION NODES
-patternProperties:
-  '$-state':
-    oneOf:
-      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
-      - patternProperties:
-          ".*":
-            $ref: "#/$defs/qcom-sdx65-tlmm-state"
-'$defs':
-  qcom-sdx65-tlmm-state:
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
-
-    properties:
-      pins:
-        description:
-          List of gpio pins affected by the properties specified in this subnode.
-        items:
-          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9])$"
-            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
-        minItems: 1
-        maxItems: 150
-
-      function:
-        description:
-          Specify the alternative function to be configured for the specified
-          pins. Functions are only valid for gpio pins.
-        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
-                bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
-                qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
-                dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
-                blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
-                mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
-                atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
-                cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
-                pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
-                qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
-                qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
-                atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
-                atest_usb20, atest_char0, dac_calib10, qdss_stm10,
-                qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
-                blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
-                qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
-                qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
-                dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
-                qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
-                dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
-                dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
-                dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
-                dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
-                sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
-                qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
-                uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
-                blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
-                qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
-                blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
-                cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
-                blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
-                qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
-                isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
-                qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
-                sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
-                gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
-                qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
-                tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
-                qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
-                sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
-                sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
-                ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
-                blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
-                pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
-                qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
-                qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
-                gpio ]
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      bias-pull-down: true
-
-      bias-pull-up: true
-
-      bias-disable: true
-
-      output-high: true
-
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-  - interrupts
-  - interrupt-controller
-  - '#interrupt-cells'
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
-
-additionalProperties: false
-
-examples:
-  - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        tlmm: pinctrl@f100000 {
-                compatible = "qcom,sdx65-tlmm";
-                reg = <0x03000000 0xdc2000>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 109>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
-
-                serial-pins {
-                    pins = "gpio8", "gpio9";
-                    function = "blsp_uart3";
-                    drive-strength = <2>;
-                    bias-disable;
-                };
-
-                uart-w-subnodes-state {
-                    rx {
-                        pins = "gpio4";
-                        function = "blsp_uart1";
-                        bias-pull-up;
-                    };
-
-                    tx {
-                        pins = "gpio5";
-                        function = "blsp_uart1";
-                        bias-disable;
-                    };
-               };
-        };
-...