Merge tag 'samsung-soc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc changes for v4.20, second round

1. Disable SAMSUNG_PM_CHECK Kconfig feature incompatible with Exynos.

* tag 'samsung-soc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: samsung: Limit SAMSUNG_PM_CHECK config option to non-Exynos platforms
  ARM: s3c24xx: Restore proper usage of pr_info/pr_cont
  ARM: s3c24xx: Correct SD card write protect detection on Mini2440
  ARM: s3c24xx: Consistently use tab for indenting member assignments
  ARM: s3c24xx: formatting cleanup in mach-mini2440.c
  ARM: s3c24xx: Remove empty gta02_pmu children probe
  ARM: exynos: Fix imprecise abort during Exynos5422 suspend to RAM
  ARM: exynos: Store Exynos5420 register state in one variable

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

7 files changed, 98 insertions, 109 deletions

diff --git a/Documentation/arm/Samsung/Bootloader-interface.txt b/Documentation/arm/Samsung/Bootloader-interface.txt
index ed494ac0beb2..d17ed518a7ea 100644
--- a/Documentation/arm/Samsung/Bootloader-interface.txt
+++ b/Documentation/arm/Samsung/Bootloader-interface.txt
@@ -26,6 +26,7 @@ Offset        Value                                        Purpose
 0x20          0xfcba0d10 (Magic cookie)                    AFTR
 0x24          exynos_cpu_resume_ns                         AFTR
 0x28 + 4*cpu  0x8 (Magic cookie, Exynos3250)               AFTR
+0x28          0x0 or last value during resume (Exynos542x) System suspend
 
 
 2. Secure mode
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index dcd21bb95e3b..f96730cce6e8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -110,6 +110,7 @@ void exynos_firmware_init(void);
 #define EXYNOS_SLEEP_MAGIC	0x00000bad
 #define EXYNOS_AFTR_MAGIC	0xfcba0d10
 
+bool __init exynos_secure_firmware_available(void);
 void exynos_set_boot_flag(unsigned int cpu, unsigned int mode);
 void exynos_clear_boot_flag(unsigned int cpu, unsigned int mode);
 
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index be1f20fe28f4..d602e3bf3f96 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -185,7 +185,7 @@ static void exynos_l2_configure(const struct l2x0_regs *regs)
 	exynos_smc(SMC_CMD_L2X0SETUP2, regs->pwr_ctrl, regs->aux_ctrl, 0);
 }
 
-void __init exynos_firmware_init(void)
+bool __init exynos_secure_firmware_available(void)
 {
 	struct device_node *nd;
 	const __be32 *addr;
@@ -193,14 +193,22 @@ void __init exynos_firmware_init(void)
 	nd = of_find_compatible_node(NULL, NULL,
 					"samsung,secure-firmware");
 	if (!nd)
-		return;
+		return false;
 
 	addr = of_get_address(nd, 0, NULL, NULL);
 	if (!addr) {
 		pr_err("%s: No address specified.\n", __func__);
-		return;
+		return false;
 	}
 
+	return true;
+}
+
+void __init exynos_firmware_init(void)
+{
+	if (!exynos_secure_firmware_available())
+		return;
+
 	pr_info("Running under secure firmware.\n");
 
 	register_firmware_ops(&exynos_firmware_ops);
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 7ead3acd6fa4..bb8e3985acdb 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -59,10 +59,15 @@ struct exynos_pm_data {
 	int (*cpu_suspend)(unsigned long);
 };
 
-static const struct exynos_pm_data *pm_data __ro_after_init;
+/* Used only on Exynos542x/5800 */
+struct exynos_pm_state {
+	int cpu_state;
+	unsigned int pmu_spare3;
+	void __iomem *sysram_base;
+};
 
-static int exynos5420_cpu_state;
-static unsigned int exynos_pmu_spare3;
+static const struct exynos_pm_data *pm_data __ro_after_init;
+static struct exynos_pm_state pm_state;
 
 /*
  * GIC wake-up support
@@ -257,7 +262,7 @@ static int exynos5420_cpu_suspend(unsigned long arg)
 	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
 	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
 
-	writel_relaxed(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(0x0, pm_state.sysram_base + EXYNOS5420_CPU_STATE);
 
 	if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
 		mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
@@ -321,7 +326,7 @@ static void exynos5420_pm_prepare(void)
 	/* Set wake-up mask registers */
 	exynos_pm_set_wakeup_mask();
 
-	exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+	pm_state.pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
 	/*
 	 * The cpu state needs to be saved and restored so that the
 	 * secondary CPUs will enter low power start. Though the U-Boot
@@ -329,8 +334,8 @@ static void exynos5420_pm_prepare(void)
 	 * needs to restore it back in case, the primary cpu fails to
 	 * suspend for any reason.
 	 */
-	exynos5420_cpu_state = readl_relaxed(sysram_base_addr +
-					     EXYNOS5420_CPU_STATE);
+	pm_state.cpu_state = readl_relaxed(pm_state.sysram_base +
+					   EXYNOS5420_CPU_STATE);
 
 	exynos_pm_enter_sleep_mode();
 
@@ -448,8 +453,8 @@ static void exynos5420_pm_resume(void)
 		       EXYNOS5_ARM_CORE0_SYS_PWR_REG);
 
 	/* Restore the sysram cpu state register */
-	writel_relaxed(exynos5420_cpu_state,
-		       sysram_base_addr + EXYNOS5420_CPU_STATE);
+	writel_relaxed(pm_state.cpu_state,
+		       pm_state.sysram_base + EXYNOS5420_CPU_STATE);
 
 	pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
 			S5P_CENTRAL_SEQ_OPTION);
@@ -457,7 +462,7 @@ static void exynos5420_pm_resume(void)
 	if (exynos_pm_central_resume())
 		goto early_wakeup;
 
-	pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+	pmu_raw_writel(pm_state.pmu_spare3, S5P_PMU_SPARE3);
 
 early_wakeup:
 
@@ -654,4 +659,13 @@ void __init exynos_pm_init(void)
 
 	register_syscore_ops(&exynos_pm_syscore_ops);
 	suspend_set_ops(&exynos_suspend_ops);
+
+	/*
+	 * Applicable as of now only to Exynos542x. If booted under secure
+	 * firmware, the non-secure region of sysram should be used.
+	 */
+	if (exynos_secure_firmware_available())
+		pm_state.sysram_base = sysram_ns_base_addr;
+	else
+		pm_state.sysram_base = sysram_base_addr;
 }
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 9d5595c4ad99..594901f3b8e5 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -219,17 +219,6 @@ static void gta02_udc_vbus_draw(unsigned int ma)
 #define gta02_udc_vbus_draw		NULL
 #endif
 
-/*
- * This is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device. Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent. This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-
-
 static char *gta02_batteries[] = {
 	"battery",
 };
@@ -355,7 +344,6 @@ static struct pcf50633_platform_data gta02_pcf_pdata = {
 		},
 
 	},
-	.probe_done = gta02_pmu_attach_child_devices,
 	.mbc_event_callback = gta02_pmu_event_callback,
 };
 
@@ -512,36 +500,6 @@ static struct platform_device *gta02_devices[] __initdata = {
 	&s3c_device_ts,
 };
 
-/* These guys DO need to be children of PMU. */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-};
-
-
-/*
- * This is called when pc50633 is probed, quite late in the day since it is an
- * I2C bus device.  Here we can define platform devices with the advantage that
- * we can mark the pcf50633 as the parent.  This makes them get suspended and
- * resumed with their parent the pcf50633 still around.  All devices whose
- * operation depends on something from pcf50633 must have this relationship
- * made explicit like this, or suspend and resume will become an unreliable
- * hellworld.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	/* Grab a copy of the now probed PMU pointer. */
-	gta02_pcf = pcf;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	platform_add_devices(gta02_devices_pmu_children,
-			     ARRAY_SIZE(gta02_devices_pmu_children));
-}
-
 static void gta02_poweroff(void)
 {
 	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index f9fc1f8d2b28..50d67d760efd 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -64,31 +64,31 @@ static struct map_desc mini2440_iodesc[] __initdata = {
 };
 
 #define UCON S3C2410_UCON_DEFAULT
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
+#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
 
 
 static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = {
 	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= UCON,
+		.ulcon		= ULCON,
+		.ufcon		= UFCON,
 	},
 };
 
@@ -104,8 +104,8 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
 /*
  * This macro simplifies the table bellow
  */
-#define _LCD_DECLARE(_clock,_xres,margin_left,margin_right,hsync, \
-			_yres,margin_top,margin_bottom,vsync, refresh) \
+#define _LCD_DECLARE(_clock, _xres, margin_left, margin_right, hsync, \
+			_yres, margin_top, margin_bottom, vsync, refresh) \
 	.width = _xres, \
 	.xres = _xres, \
 	.height = _yres, \
@@ -128,7 +128,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
 		_LCD_DECLARE(
 			7,			/* The 3.5 is quite fast */
-			240, 21, 38, 6, 	/* x timing */
+			240, 21, 38, 6,		/* x timing */
 			320, 4, 4, 2,		/* y timing */
 			60),			/* refresh rate */
 		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
@@ -140,7 +140,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 	[1] = { /* mini2440 + 7" TFT + touchscreen */
 		_LCD_DECLARE(
 			10,			/* the 7" runs slower */
-			800, 40, 40, 48, 	/* x timing */
+			800, 40, 40, 48,	/* x timing */
 			480, 29, 3, 3,		/* y timing */
 			50),			/* refresh rate */
 		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
@@ -148,7 +148,7 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 				   S3C2410_LCDCON5_INVVFRAME |
 				   S3C2410_LCDCON5_PWREN),
 	},
-	/* The VGA shield can outout at several resolutions. All share 
+	/* The VGA shield can outout at several resolutions. All share
 	 * the same timings, however, anything smaller than 1024x768
 	 * will only be displayed in the top left corner of a 1024x768
 	 * XGA output unless you add optional dip switches to the shield.
@@ -158,9 +158,10 @@ static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 		_LCD_DECLARE(
 			10,
 			1024, 1, 2, 2,		/* y timing */
-			768, 200, 16, 16, 	/* x timing */
+			768, 200, 16, 16,	/* x timing */
 			24),	/* refresh rate, maximum stable,
-				 tested with the FPGA shield */
+				 * tested with the FPGA shield
+				 */
 		.lcdcon5	= (S3C2410_LCDCON5_FRM565 |
 				   S3C2410_LCDCON5_HWSWP),
 	},
@@ -196,7 +197,8 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 
 	/* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN
 	 * and disable the pull down resistors on pins we are using for LCD
-	 * data. */
+	 * data.
+	 */
 
 	.gpcup		= (0xf << 1) | (0x3f << 10),
 
@@ -232,10 +234,11 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 /* MMC/SD  */
 
 static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
-   .gpio_detect   = S3C2410_GPG(8),
-   .gpio_wprotect = S3C2410_GPH(8),
-   .set_power     = NULL,
-   .ocr_avail     = MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_detect		= S3C2410_GPG(8),
+	.gpio_wprotect		= S3C2410_GPH(8),
+	.wprotect_invert	= 1,
+	.set_power		= NULL,
+	.ocr_avail		= MMC_VDD_32_33|MMC_VDD_33_34,
 };
 
 /* NAND Flash on MINI2440 board */
@@ -254,7 +257,8 @@ static struct mtd_partition mini2440_default_nand_part[] __initdata = {
 	[2] = {
 		.name	= "kernel",
 		/* 5 megabytes, for a kernel with no modules
-		 * or a uImage with a ramdisk attached */
+		 * or a uImage with a ramdisk attached
+		 */
 		.size	= 0x00500000,
 		.offset	= SZ_256K + SZ_128K,
 	},
@@ -271,7 +275,7 @@ static struct s3c2410_nand_set mini2440_nand_sets[] __initdata = {
 		.nr_chips	= 1,
 		.nr_partitions	= ARRAY_SIZE(mini2440_default_nand_part),
 		.partitions	= mini2440_default_nand_part,
-		.flash_bbt 	= 1, /* we use u-boot to create a BBT */
+		.flash_bbt	= 1, /* we use u-boot to create a BBT */
 	},
 };
 
@@ -282,7 +286,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
-	.ecc_mode       = NAND_ECC_HW,
+	.ecc_mode	= NAND_ECC_HW,
 };
 
 /* DM9000AEP 10/100 ethernet controller */
@@ -290,7 +294,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 static struct resource mini2440_dm9k_resource[] = {
 	[0] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE, 4),
 	[1] = DEFINE_RES_MEM(MACH_MINI2440_DM9K_BASE + 4, 4),
-	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ \
+	[2] = DEFINE_RES_NAMED(IRQ_EINT7, 1, NULL, IORESOURCE_IRQ
 						| IORESOURCE_IRQ_HIGHEDGE),
 };
 
@@ -362,7 +366,8 @@ static struct gpio_keys_button mini2440_buttons[] = {
 	},
 #if 0
 	/* this pin is also known as TCLK1 and seems to already
-	 * marked as "in use" somehow in the kernel -- possibly wrongly */
+	 * marked as "in use" somehow in the kernel -- possibly wrongly
+	 */
 	{
 		.gpio		= S3C2410_GPG(11),	/* K6 */
 		.code		= KEY_F6,
@@ -564,7 +569,8 @@ static char mini2440_features_str[12] __initdata = "0tb";
 static int __init mini2440_features_setup(char *str)
 {
 	if (str)
-		strlcpy(mini2440_features_str, str, sizeof(mini2440_features_str));
+		strlcpy(mini2440_features_str, str,
+			sizeof(mini2440_features_str));
 	return 1;
 }
 
@@ -583,10 +589,10 @@ struct mini2440_features_t {
 };
 
 static void __init mini2440_parse_features(
-		struct mini2440_features_t * features,
-		const char * features_str )
+		struct mini2440_features_t *features,
+		const char *features_str)
 {
-	const char * fp = features_str;
+	const char *fp = features_str;
 
 	features->count = 0;
 	features->done = 0;
@@ -598,13 +604,14 @@ static void __init mini2440_parse_features(
 		switch (f) {
 		case '0'...'9':	/* tft screen */
 			if (features->done & FEATURE_SCREEN) {
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"screen type already set\n", f);
+				pr_info("MINI2440: '%c' ignored, screen type already set\n",
+					f);
 			} else {
 				int li = f - '0';
+
 				if (li >= ARRAY_SIZE(mini2440_lcd_cfg))
-					printk(KERN_INFO "MINI2440: "
-						"'%c' out of range LCD mode\n", f);
+					pr_info("MINI2440: '%c' out of range LCD mode\n",
+						f);
 				else {
 					features->optional[features->count++] =
 							&s3c_device_lcd;
@@ -615,8 +622,8 @@ static void __init mini2440_parse_features(
 			break;
 		case 'b':
 			if (features->done & FEATURE_BACKLIGHT)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"backlight already set\n", f);
+				pr_info("MINI2440: '%c' ignored, backlight already set\n",
+					f);
 			else {
 				features->optional[features->count++] =
 						&mini2440_led_backlight;
@@ -624,13 +631,13 @@ static void __init mini2440_parse_features(
 			features->done |= FEATURE_BACKLIGHT;
 			break;
 		case 't':
-			printk(KERN_INFO "MINI2440: '%c' ignored, "
-				"touchscreen not compiled in\n", f);
+			pr_info("MINI2440: '%c' ignored, touchscreen not compiled in\n",
+				f);
 			break;
 		case 'c':
 			if (features->done & FEATURE_CAMERA)
-				printk(KERN_INFO "MINI2440: '%c' ignored, "
-					"camera already registered\n", f);
+				pr_info("MINI2440: '%c' ignored, camera already registered\n",
+					f);
 			else
 				features->optional[features->count++] =
 					&s3c_device_camif;
@@ -645,7 +652,7 @@ static void __init mini2440_init(void)
 	struct mini2440_features_t features = { 0 };
 	int i;
 
-	printk(KERN_INFO "MINI2440: Option string mini2440=%s\n",
+	pr_info("MINI2440: Option string mini2440=%s\n",
 			mini2440_features_str);
 
 	/* Parse the feature string */
@@ -674,17 +681,17 @@ static void __init mini2440_init(void)
 		mini2440_fb_info.displays =
 			&mini2440_lcd_cfg[features.lcd_index];
 
-		printk(KERN_INFO "MINI2440: LCD");
+		pr_info("MINI2440: LCD");
 		for (li = 0; li < ARRAY_SIZE(mini2440_lcd_cfg); li++)
 			if (li == features.lcd_index)
-				printk(" [%d:%dx%d]", li,
+				pr_cont(" [%d:%dx%d]", li,
 					mini2440_lcd_cfg[li].width,
 					mini2440_lcd_cfg[li].height);
 			else
-				printk(" %d:%dx%d", li,
+				pr_cont(" %d:%dx%d", li,
 					mini2440_lcd_cfg[li].width,
 					mini2440_lcd_cfg[li].height);
-		printk("\n");
+		pr_cont("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
 
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b600e38364eb..377ff9cda667 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -256,7 +256,7 @@ config S3C_PM_DEBUG_LED_SMDK
 
 config SAMSUNG_PM_CHECK
 	bool "S3C2410 PM Suspend Memory CRC"
-	depends on PM
+	depends on PM && (PLAT_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210)
 	select CRC32
 	help
 	  Enable the PM code's memory area checksum over sleep. This option