Merge tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These rework the system-wide PM driver flags, make runtime switching
  of cpuidle governors easier, improve the user space hibernation
  interface code, add intel-speed-select interface documentation, add
  more debug messages to the ACPI code handling suspend to idle, update
  the cpufreq core and drivers, fix a minor issue in the cpuidle core
  and update two cpuidle drivers, improve the PM-runtime framework,
  update the Intel RAPL power capping driver, update devfreq core and
  drivers, and clean up the cpupower utility.

  Specifics:

   - Rework the system-wide PM driver flags to make them easier to
     understand and use and update their documentation (Rafael Wysocki,
     Alan Stern).

   - Allow cpuidle governors to be switched at run time regardless of
     the kernel configuration and update the related documentation
     accordingly (Hanjun Guo).

   - Improve the resume device handling in the user space hibernarion
     interface code (Domenico Andreoli).

   - Document the intel-speed-select sysfs interface (Srinivas
     Pandruvada).

   - Make the ACPI code handing suspend to idle print more debug
     messages to help diagnose issues with it (Rafael Wysocki).

   - Fix a helper routine in the cpufreq core and correct a typo in the
     struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang
     Wenhu).

   - Update cpufreq drivers:

      - Make the intel_pstate driver start in the passive mode by
        default on systems without HWP (Rafael Wysocki).

      - Add i.MX7ULP support to the imx-cpufreq-dt driver and add
        i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan).

      - Convert the qoriq cpufreq driver to a platform one, make the
        platform code create a suitable device object for it and add
        platform dependencies to it (Mian Yousaf Kaukab, Geert
        Uytterhoeven).

      - Fix wrong compatible binding in the qcom driver (Ansuel Smith).

      - Build the omap driver by default for ARCH_OMAP2PLUS (Anders
        Roxell).

      - Add r8a7742 SoC support to the dt cpufreq driver (Lad
        Prabhakar).

   - Update cpuidle core and drivers:

      - Fix three reference count leaks in error code paths in the
        cpuidle core (Qiushi Wu).

      - Convert Qualcomm SPM to a generic cpuidle driver (Stephan
        Gerhold).

      - Fix up the execution order when entering a domain idle state in
        the PSCI driver (Ulf Hansson).

   - Fix a reference counting issue related to clock management and
     clean up two oddities in the PM-runtime framework (Rafael Wysocki,
     Andy Shevchenko).

   - Add ElkhartLake support to the Intel RAPL power capping driver and
     remove an unused local MSR definition from it (Jacob Pan, Sumeet
     Pawnikar).

   - Update devfreq core and drivers:

      - Replace strncpy() with strscpy() in the devfreq core and use
        lockdep asserts instead of manual checks for a locked mutex in
        it (Dmitry Osipenko, Krzysztof Kozlowski).

      - Add a generic imx bus scaling driver and make it register an
        interconnect device (Leonard Crestez, Gustavo A. R. Silva).

      - Make the cpufreq notifier in the tegra30 driver take boosting
        into account and delete an unuseful error message from that
        driver (Dmitry Osipenko, Markus Elfring).

   - Remove unneeded semicolon from the cpupower code (Zou Wei)"

* tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits)
  cpuidle: Fix three reference count leaks
  PM: runtime: Replace pm_runtime_callbacks_present()
  PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex
  PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: Replace strncpy with strscpy
  PM / devfreq: imx: Register interconnect device
  PM / devfreq: Add generic imx bus scaling driver
  PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe()
  PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting
  PM: hibernate: Restrict writes to the resume device
  PM: runtime: clk: Fix clk_pm_runtime_get() error path
  cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver
  ACPI: EC: PM: s2idle: Extend GPE dispatching debug message
  ACPI: PM: s2idle: Print type of wakeup debug messages
  powercap: RAPL: remove unused local MSR define
  PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend()
  Documentation: admin-guide: pm: Document intel-speed-select
  PM: hibernate: Split off snapshot dev option
  PM: hibernate: Incorporate concurrency handling
  Documentation: ABI: make current_governer_ro as a candidate for removal
  ...

70 files changed, 1831 insertions, 728 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-cpuidle b/Documentation/ABI/obsolete/sysfs-cpuidle
new file mode 100644
index 000000000000..e398fb5e542f
--- /dev/null
+++ b/Documentation/ABI/obsolete/sysfs-cpuidle
@@ -0,0 +1,9 @@
+What:		/sys/devices/system/cpu/cpuidle/current_governor_ro
+Date:		April, 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+	current_governor_ro shows current using cpuidle governor, but read only.
+	with the update that cpuidle governor can be changed at runtime in default,
+	both current_governor and current_governor_ro co-exist under
+	/sys/devices/system/cpu/cpuidle/ file, it's duplicate so make
+	current_governor_ro obselete.
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu
index 2e0e3b45d02a..6b5dafab950c 100644
--- a/Documentation/ABI/testing/sysfs-devices-system-cpu
+++ b/Documentation/ABI/testing/sysfs-devices-system-cpu
@@ -106,10 +106,10 @@ Description:	CPU topology files that describe a logical CPU's relationship
 		See Documentation/admin-guide/cputopology.rst for more information.
 
 
-What:		/sys/devices/system/cpu/cpuidle/current_driver
-		/sys/devices/system/cpu/cpuidle/current_governer_ro
-		/sys/devices/system/cpu/cpuidle/available_governors
+What:		/sys/devices/system/cpu/cpuidle/available_governors
+		/sys/devices/system/cpu/cpuidle/current_driver
 		/sys/devices/system/cpu/cpuidle/current_governor
+		/sys/devices/system/cpu/cpuidle/current_governer_ro
 Date:		September 2007
 Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
 Description:	Discover cpuidle policy and mechanism
@@ -119,24 +119,18 @@ Description:	Discover cpuidle policy and mechanism
 		consumption during idle.
 
 		Idle policy (governor) is differentiated from idle mechanism
-		(driver)
-
-		current_driver: (RO) displays current idle mechanism
-
-		current_governor_ro: (RO) displays current idle policy
-
-		With the cpuidle_sysfs_switch boot option enabled (meant for
-		developer testing), the following three attributes are visible
-		instead:
-
-		current_driver: same as described above
+		(driver).
 
 		available_governors: (RO) displays a space separated list of
-		available governors
+		available governors.
+
+		current_driver: (RO) displays current idle mechanism.
 
 		current_governor: (RW) displays current idle policy. Users can
 		switch the governor at runtime by writing to this file.
 
+		current_governor_ro: (RO) displays current idle policy.
+
 		See Documentation/admin-guide/pm/cpuidle.rst and
 		Documentation/driver-api/pm/cpuidle.rst for more information.
 
diff --git a/Documentation/admin-guide/pm/cpuidle.rst b/Documentation/admin-guide/pm/cpuidle.rst
index 5605cc6f9560..a96a423e3779 100644
--- a/Documentation/admin-guide/pm/cpuidle.rst
+++ b/Documentation/admin-guide/pm/cpuidle.rst
@@ -159,17 +159,15 @@ governor uses that information depends on what algorithm is implemented by it
 and that is the primary reason for having more than one governor in the
 ``CPUIdle`` subsystem.
 
-There are three ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_
-and ``ladder``.  Which of them is used by default depends on the configuration
-of the kernel and in particular on whether or not the scheduler tick can be
-`stopped by the idle loop <idle-cpus-and-tick_>`_.  It is possible to change the
-governor at run time if the ``cpuidle_sysfs_switch`` command line parameter has
-been passed to the kernel, but that is not safe in general, so it should not be
-done on production systems (that may change in the future, though).  The name of
-the ``CPUIdle`` governor currently used by the kernel can be read from the
-:file:`current_governor_ro` (or :file:`current_governor` if
-``cpuidle_sysfs_switch`` is present in the kernel command line) file under
-:file:`/sys/devices/system/cpu/cpuidle/` in ``sysfs``.
+There are four ``CPUIdle`` governors available, ``menu``, `TEO <teo-gov_>`_,
+``ladder`` and ``haltpoll``.  Which of them is used by default depends on the
+configuration of the kernel and in particular on whether or not the scheduler
+tick can be `stopped by the idle loop <idle-cpus-and-tick_>`_.  Available
+governors can be read from the :file:`available_governors`, and the governor
+can be changed at runtime.  The name of the ``CPUIdle`` governor currently
+used by the kernel can be read from the :file:`current_governor_ro` or
+:file:`current_governor` file under :file:`/sys/devices/system/cpu/cpuidle/`
+in ``sysfs``.
 
 Which ``CPUIdle`` driver is used, on the other hand, usually depends on the
 platform the kernel is running on, but there are platforms with more than one
diff --git a/Documentation/admin-guide/pm/intel-speed-select.rst b/Documentation/admin-guide/pm/intel-speed-select.rst
new file mode 100644
index 000000000000..b2ca601c21c6
--- /dev/null
+++ b/Documentation/admin-guide/pm/intel-speed-select.rst
@@ -0,0 +1,917 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================================
+Intel(R) Speed Select Technology User Guide
+============================================================
+
+The Intel(R) Speed Select Technology (Intel(R) SST) provides a powerful new
+collection of features that give more granular control over CPU performance.
+With Intel(R) SST, one server can be configured for power and performance for a
+variety of diverse workload requirements.
+
+Refer to the links below for an overview of the technology:
+
+- https://www.intel.com/content/www/us/en/architecture-and-technology/speed-select-technology-article.html
+- https://builders.intel.com/docs/networkbuilders/intel-speed-select-technology-base-frequency-enhancing-performance.pdf
+
+These capabilities are further enhanced in some of the newer generations of
+server platforms where these features can be enumerated and controlled
+dynamically without pre-configuring via BIOS setup options. This dynamic
+configuration is done via mailbox commands to the hardware. One way to enumerate
+and configure these features is by using the Intel Speed Select utility.
+
+This document explains how to use the Intel Speed Select tool to enumerate and
+control Intel(R) SST features. This document gives example commands and explains
+how these commands change the power and performance profile of the system under
+test. Using this tool as an example, customers can replicate the messaging
+implemented in the tool in their production software.
+
+intel-speed-select configuration tool
+======================================
+
+Most Linux distribution packages may include the "intel-speed-select" tool. If not,
+it can be built by downloading the Linux kernel tree from kernel.org. Once
+downloaded, the tool can be built without building the full kernel.
+
+From the kernel tree, run the following commands::
+
+# cd tools/power/x86/intel-speed-select/
+# make
+# make install
+
+Getting Help
+------------
+
+To get help with the tool, execute the command below::
+
+# intel-speed-select --help
+
+The top-level help describes arguments and features. Notice that there is a
+multi-level help structure in the tool. For example, to get help for the feature "perf-profile"::
+
+# intel-speed-select perf-profile --help
+
+To get help on a command, another level of help is provided. For example for the command info "info"::
+
+# intel-speed-select perf-profile info --help
+
+Summary of platform capability
+------------------------------
+To check the current platform and driver capaibilities, execute::
+
+#intel-speed-select --info
+
+For example on a test system::
+
+ # intel-speed-select --info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Platform: API version : 1
+ Platform: Driver version : 1
+ Platform: mbox supported : 1
+ Platform: mmio supported : 1
+ Intel(R) SST-PP (feature perf-profile) is supported
+ TDP level change control is unlocked, max level: 4
+ Intel(R) SST-TF (feature turbo-freq) is supported
+ Intel(R) SST-BF (feature base-freq) is not supported
+ Intel(R) SST-CP (feature core-power) is supported
+
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP)
+------------------------------------------------------------------------
+
+This feature allows configuration of a server dynamically based on workload
+performance requirements. This helps users during deployment as they do not have
+to choose a specific server configuration statically.  This Intel(R) Speed Select
+Technology - Performance Profile (Intel(R) SST-PP) feature introduces a mechanism
+that allows multiple optimized performance profiles per system. Each profile
+defines a set of CPUs that need to be online and rest offline to sustain a
+guaranteed base frequency. Once the user issues a command to use a specific
+performance profile and meet CPU online/offline requirement, the user can expect
+a change in the base frequency dynamically. This feature is called
+"perf-profile" when using the Intel Speed Select tool.
+
+Number or performance levels
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+There can be multiple performance profiles on a system. To get the number of
+profiles, execute the command below::
+
+ # intel-speed-select perf-profile get-config-levels
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+        get-config-levels:4
+ package-1
+  die-0
+    cpu-14
+        get-config-levels:4
+
+On this system under test, there are 4 performance profiles in addition to the
+base performance profile (which is performance level 0).
+
+Lock/Unlock status
+~~~~~~~~~~~~~~~~~~
+
+Even if there are multiple performance profiles, it is possible that that they
+are locked. If they are locked, users cannot issue a command to change the
+performance state. It is possible that there is a BIOS setup to unlock or check
+with your system vendor.
+
+To check if the system is locked, execute the following command::
+
+ # intel-speed-select perf-profile get-lock-status
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+        get-lock-status:0
+ package-1
+  die-0
+    cpu-14
+        get-lock-status:0
+
+In this case, lock status is 0, which means that the system is unlocked.
+
+Properties of a performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get properties of a specific performance level (For example for the level 0, below), execute the command below::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      perf-profile-level-0
+        cpu-count:28
+        enable-cpu-mask:000003ff,f0003fff
+        enable-cpu-list:0,1,2,3,4,5,6,7,8,9,10,11,12,13,28,29,30,31,32,33,34,35,36,37,38,39,40,41
+        thermal-design-power-ratio:26
+        base-frequency(MHz):2600
+        speed-select-turbo-freq:disabled
+        speed-select-base-freq:disabled
+	...
+	...
+
+Here -l option is used to specify a performance level.
+
+If the option -l is omitted, then this command will print information about all
+the performance levels. The above command is printing properties of the
+performance level 0.
+
+For this performance profile, the list of CPUs displayed by the
+"enable-cpu-mask/enable-cpu-list" at the max can be "online." When that
+condition is met, then base frequency of 2600 MHz can be maintained. To
+understand more, execute "intel-speed-select perf-profile info" for performance
+level 4::
+
+ # intel-speed-select perf-profile info -l 4
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      perf-profile-level-4
+        cpu-count:28
+        enable-cpu-mask:000000fa,f0000faf
+        enable-cpu-list:0,1,2,3,5,7,8,9,10,11,28,29,30,31,33,35,36,37,38,39
+        thermal-design-power-ratio:28
+        base-frequency(MHz):2800
+        speed-select-turbo-freq:disabled
+        speed-select-base-freq:unsupported
+	...
+	...
+
+There are fewer CPUs in the "enable-cpu-mask/enable-cpu-list". Consequently, if
+the user only keeps these CPUs online and the rest "offline," then the base
+frequency is increased to 2.8 GHz compared to 2.6 GHz at performance level 0.
+
+Get current performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the current performance level, execute::
+
+ # intel-speed-select perf-profile get-config-current-level
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+        get-config-current_level:0
+
+First verify that the base_frequency displayed by the cpufreq sysfs is correct::
+
+ # cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2600000
+
+This matches the base-frequency (MHz) field value displayed from the
+"perf-profile info" command for performance level 0(cpufreq frequency is in
+KHz).
+
+To check if the average frequency is equal to the base frequency for a 100% busy
+workload, disable turbo::
+
+# echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Then runs a busy workload on all CPUs, for example::
+
+#stress -c 64
+
+To verify the base frequency, run turbostat::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+
+  Package	Core	CPU	Bzy_MHz
+		-	-	2600
+  0		0	0	2600
+  0		1	1	2600
+  0		2	2	2600
+  0		3	3	2600
+  0		4	4	2600
+  .		.	.	.
+
+
+Changing performance level
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To the change the performance level to 4, execute::
+
+ # intel-speed-select -d perf-profile set-config-level -l 4 -o
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      perf-profile
+        set_tdp_level:success
+
+In the command above, "-o" is optional. If it is specified, then it will also
+offline CPUs which are not present in the enable_cpu_mask for this performance
+level.
+
+Now if the base_frequency is checked::
+
+ #cat /sys/devices/system/cpu/cpu0/cpufreq/base_frequency
+ 2800000
+
+Which shows that the base frequency now increased from 2600 MHz at performance
+level 0 to 2800 MHz at performance level 4. As a result, any workload, which can
+use fewer CPUs, can see a boost of 200 MHz compared to performance level 0.
+
+Check presence of other Intel(R) SST features
+---------------------------------------------
+
+Each of the performance profiles also specifies weather there is support of
+other two Intel(R) SST features (Intel(R) Speed Select Technology - Base Frequency
+(Intel(R) SST-BF) and Intel(R) Speed Select Technology - Turbo Frequency (Intel
+SST-TF)).
+
+For example, from the output of "perf-profile info" above, for level 0 and level
+4:
+
+For level 0::
+       speed-select-turbo-freq:disabled
+       speed-select-base-freq:disabled
+
+For level 4::
+       speed-select-turbo-freq:disabled
+       speed-select-base-freq:unsupported
+
+Given these results, the "speed-select-base-freq" (Intel(R) SST-BF) in level 4
+changed from "disabled" to "unsupported" compared to performance level 0.
+
+This means that at performance level 4, the "speed-select-base-freq" feature is
+not supported. However, at performance level 0, this feature is "supported", but
+currently "disabled", meaning the user has not activated this feature. Whereas
+"speed-select-turbo-freq" (Intel(R) SST-TF) is supported at both performance
+levels, but currently not activated by the user.
+
+The Intel(R) SST-BF and the Intel(R) SST-TF features are built on a foundation
+technology called Intel(R) Speed Select Technology - Core Power (Intel(R) SST-CP).
+The platform firmware enables this feature when Intel(R) SST-BF or Intel(R) SST-TF
+is supported on a platform.
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP)
+---------------------------------------------------------------
+
+Intel(R) Speed Select Technology Core Power (Intel(R) SST-CP) is an interface that
+allows users to define per core priority. This defines a mechanism to distribute
+power among cores when there is a power constrained scenario. This defines a
+class of service (CLOS) configuration.
+
+The user can configure up to 4 class of service configurations. Each CLOS group
+configuration allows definitions of parameters, which affects how the frequency
+can be limited and power is distributed. Each CPU core can be tied to a class of
+service and hence an associated priority. The granularity is at core level not
+at per CPU level.
+
+Enable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To use CLOS based prioritization feature, firmware must be informed to enable
+and use a priority type. There is a default per platform priority type, which
+can be changed with optional command line parameter.
+
+To enable and check the options, execute::
+
+ # intel-speed-select core-power enable --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Enable core-power for a package/die
+	Clos Enable: Specify priority type with [--priority|-p]
+		 0: Proportional, 1: Ordered
+
+There are two types of priority types:
+
+- Ordered
+
+Priority for ordered throttling is defined based on the index of the assigned
+CLOS group. Where CLOS0 gets highest priority (throttled last).
+
+Priority order is:
+CLOS0 > CLOS1 > CLOS2 > CLOS3.
+
+- Proportional
+
+When proportional priority is used, there is an additional parameter called
+frequency_weight, which can be specified per CLOS group. The goal of
+proportional priority is to provide each core with the requested min., then
+distribute all remaining (excess/deficit) budgets in proportion to a defined
+weight. This proportional priority can be configured using "core-power config"
+command.
+
+To enable with the platform default priority type, execute::
+
+ # intel-speed-select core-power enable
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      core-power
+        enable:success
+ package-1
+  die-0
+    cpu-6
+      core-power
+        enable:success
+
+The scope of this enable is per package or die scoped when a package contains
+multiple dies. To check if CLOS is enabled and get priority type, "core-power
+info" command can be used. For example to check the status of core-power feature
+on CPU 0, execute::
+
+ # intel-speed-select -c 0 core-power info
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      core-power
+        support-status:supported
+        enable-status:enabled
+        clos-enable-status:enabled
+        priority-type:proportional
+ package-1
+  die-0
+    cpu-24
+      core-power
+        support-status:supported
+        enable-status:enabled
+        clos-enable-status:enabled
+        priority-type:proportional
+
+Configuring CLOS groups
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Each CLOS group has its own attributes including min, max, freq_weight and
+desired. These parameters can be configured with "core-power config" command.
+Defaults will be used if user skips setting a parameter except clos id, which is
+mandatory. To check core-power config options, execute::
+
+ # intel-speed-select core-power config --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Set core-power configuration for one of the four clos ids
+	Specify targeted clos id with [--clos|-c]
+	Specify clos Proportional Priority [--weight|-w]
+	Specify clos min in MHz with [--min|-n]
+	Specify clos max in MHz with [--max|-m]
+
+For example::
+
+ # intel-speed-select core-power config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ clos epp is not specified, default: 0
+ clos frequency weight is not specified, default: 0
+ clos min is not specified, default: 0 MHz
+ clos max is not specified, default: 25500 MHz
+ clos desired is not specified, default: 0
+ package-0
+  die-0
+    cpu-0
+      core-power
+        config:success
+ package-1
+  die-0
+    cpu-6
+      core-power
+        config:success
+
+The user has the option to change defaults. For example, the user can change the
+"min" and set the base frequency to always get guaranteed base frequency.
+
+Get the current CLOS configuration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To check the current configuration, "core-power get-config" can be used. For
+example, to get the configuration of CLOS 0::
+
+ # intel-speed-select core-power get-config -c 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      core-power
+        clos:0
+        epp:0
+        clos-proportional-priority:0
+        clos-min:0 MHz
+        clos-max:Max Turbo frequency
+        clos-desired:0 MHz
+ package-1
+  die-0
+    cpu-24
+      core-power
+        clos:0
+        epp:0
+        clos-proportional-priority:0
+        clos-min:0 MHz
+        clos-max:Max Turbo frequency
+        clos-desired:0 MHz
+
+Associating a CPU with a CLOS group
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To associate a CPU to a CLOS group "core-power assoc" command can be used::
+
+ # intel-speed-select core-power assoc --help
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ Associate a clos id to a CPU
+	Specify targeted clos id with [--clos|-c]
+
+
+For example to associate CPU 10 to CLOS group 3, execute::
+
+ # intel-speed-select -c 10 core-power assoc -c 3
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-10
+      core-power
+        assoc:success
+
+Once a CPU is associated, its sibling CPUs are also associated to a CLOS group.
+Once associated, avoid changing Linux "cpufreq" subsystem scaling frequency
+limits.
+
+To check the existing association for a CPU, "core-power get-assoc" command can
+be used. For example, to get association of CPU 10, execute::
+
+ # intel-speed-select -c 10 core-power get-assoc
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-1
+  die-0
+    cpu-10
+      get-assoc
+        clos:3
+
+This shows that CPU 10 is part of a CLOS group 3.
+
+
+Disable CLOS based prioritization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable, execute::
+
+# intel-speed-select core-power disable
+
+Some features like Intel(R) SST-TF can only be enabled when CLOS based prioritization
+is enabled. For this reason, disabling while Intel(R) SST-TF is enabled can cause
+Intel(R) SST-TF to fail. This will cause the "disable" command to display an error
+if Intel(R) SST-TF is already enabled. In turn, to disable, the Intel(R) SST-TF
+feature must be disabled first.
+
+Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF)
+-------------------------------------------------------------------
+
+The Intel(R) Speed Select Technology - Base Frequency (Intel(R) SST-BF) feature lets
+the user control base frequency. If some critical workload threads demand
+constant high guaranteed performance, then this feature can be used to execute
+the thread at higher base frequency on specific sets of CPUs (high priority
+CPUs) at the cost of lower base frequency (low priority CPUs) on other CPUs.
+This feature does not require offline of the low priority CPUs.
+
+The support of Intel(R) SST-BF depends on the Intel(R) Speed Select Technology -
+Performance Profile (Intel(R) SST-PP) performance level configuration. It is
+possible that only certain performance levels support Intel(R) SST-BF. It is also
+possible that only base performance level (level = 0) has support of Intel
+SST-BF. Consequently, first select the desired performance level to enable this
+feature.
+
+In the system under test here, Intel(R) SST-BF is supported at the base
+performance level 0, but currently disabled. For example for the level 0::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      perf-profile-level-0
+        ...
+
+        speed-select-base-freq:disabled
+	...
+
+Before enabling Intel(R) SST-BF and measuring its impact on a workload
+performance, execute some workload and measure performance and get a baseline
+performance to compare against.
+
+Here the user wants more guaranteed performance. For this reason, it is likely
+that turbo is disabled. To disable turbo, execute::
+
+#echo 1 > /sys/devices/system/cpu/intel_pstate/no_turbo
+
+Based on the output of the "intel-speed-select perf-profile info -l 0" base
+frequency of guaranteed frequency 2600 MHz.
+
+
+Measure baseline performance for comparison
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To compare, pick a multi-threaded workload where each thread can be scheduled on
+separate CPUs. "Hackbench pipe" test is a good example on how to improve
+performance using Intel(R) SST-BF.
+
+Below, the workload is measuring average scheduler wakeup latency, so a lower
+number means better performance::
+
+ # taskset -c 3,4 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+     Total time: 6.102 [sec]
+       6.102445 usecs/op
+         163868 ops/sec
+
+While running the above test, if we take turbostat output, it will show us that
+2 of the CPUs are busy and reaching max. frequency (which would be the base
+frequency as the turbo is disabled). The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package	Core	CPU	Bzy_MHz
+ 0		0	0	1000
+ 0		1	1	1005
+ 0		2	2	1000
+ 0		3	3	2600
+ 0		4	4	2600
+ 0		5	5	1000
+ 0		6	6	1000
+ 0		7	7	1005
+ 0		8	8	1005
+ 0		9	9	1000
+ 0		10	10	1000
+ 0		11	11	995
+ 0		12	12	1000
+ 0		13	13	1000
+
+From the above turbostat output, both CPU 3 and 4 are very busy and reaching
+full guaranteed frequency of 2600 MHz.
+
+Intel(R) SST-BF Capabilities
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get capabilities of Intel(R) SST-BF for the current performance level 0,
+execute::
+
+ # intel-speed-select base-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      speed-select-base-freq
+        high-priority-base-frequency(MHz):3000
+        high-priority-cpu-mask:00000216,00002160
+        high-priority-cpu-list:5,6,8,13,33,34,36,41
+        low-priority-base-frequency(MHz):2400
+        tjunction-temperature(C):125
+        thermal-design-power(W):205
+
+The above capabilities show that there are some CPUs on this system that can
+offer base frequency of 3000 MHz compared to the standard base frequency at this
+performance levels. Nevertheless, these CPUs are fixed, and they are presented
+via high-priority-cpu-list/high-priority-cpu-mask. But if this Intel(R) SST-BF
+feature is selected, the low priorities CPUs (which are not in
+high-priority-cpu-list) can only offer up to 2400 MHz. As a result, if this
+clipping of low priority CPUs is acceptable, then the user can enable Intel
+SST-BF feature particularly for the above "sched pipe" workload since only two
+CPUs are used, they can be scheduled on high priority CPUs and can get boost of
+400 MHz.
+
+Enable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-BF feature, execute::
+
+ # intel-speed-select base-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      base-freq
+        enable:success
+ package-1
+  die-0
+    cpu-14
+      base-freq
+        enable:success
+
+In this case, -a option is optional. This not only enables Intel(R) SST-BF, but it
+also adjusts the priority of cores using Intel(R) Speed Select Technology Core
+Power (Intel(R) SST-CP) features. This option sets the minimum performance of each
+Intel(R) Speed Select Technology - Performance Profile (Intel(R) SST-PP) class to
+maximum performance so that the hardware will give maximum performance possible
+for each CPU.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-BF:
+
+- Discover Intel(R) SST-BF and note low and high priority base frequency
+- Note the high prioity CPU list
+- Enable CLOS using core-power feature set
+- Configure CLOS parameters. Use CLOS.min to set to minimum performance
+- Subscribe desired CPUs to CLOS groups
+
+With this configuration, if the same workload is executed by pinning the
+workload to high priority CPUs (CPU 5 and 6 in this case)::
+
+ #taskset -c 5,6 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+     Total time: 5.627 [sec]
+       5.627922 usecs/op
+         177685 ops/sec
+
+This way, by enabling Intel(R) SST-BF, the performance of this benchmark is
+improved (latency reduced) by 7.79%. From the turbostat output, it can be
+observed that the high priority CPUs reached 3000 MHz compared to 2600 MHz.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package	Core	CPU	Bzy_MHz
+ 0		0	0	2151
+ 0		1	1	2166
+ 0		2	2	2175
+ 0		3	3	2175
+ 0		4	4	2175
+ 0		5	5	3000
+ 0		6	6	3000
+ 0		7	7	2180
+ 0		8	8	2662
+ 0		9	9	2176
+ 0		10	10	2175
+ 0		11	11	2176
+ 0		12	12	2176
+ 0		13	13	2661
+
+Disable Intel(R) SST-BF
+~~~~~~~~~~~~~~~~~~~~~~~
+
+To disable the Intel(R) SST-BF feature, execute::
+
+# intel-speed-select base-freq disable -a
+
+
+Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+--------------------------------------------------------------------
+
+This feature enables the ability to set different "All core turbo ratio limits"
+to cores based on the priority. By using this feature, some cores can be
+configured to get higher turbo frequency by designating them as high priority at
+the cost of lower or no turbo frequency on the low priority cores.
+
+For this reason, this feature is only useful when system is busy utilizing all
+CPUs, but the user wants some configurable option to get high performance on
+some CPUs.
+
+The support of Intel(R) Speed Select Technology - Turbo Frequency (Intel(R) SST-TF)
+depends on the Intel(R) Speed Select Technology - Performance Profile (Intel
+SST-PP) performance level configuration. It is possible that only a certain
+performance level supports Intel(R) SST-TF. It is also possible that only the base
+performance level (level = 0) has the support of Intel(R) SST-TF. Hence, first
+select the desired performance level to enable this feature.
+
+In the system under test here, Intel(R) SST-TF is supported at the base
+performance level 0, but currently disabled::
+
+ # intel-speed-select -c 0 perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ package-0
+  die-0
+    cpu-0
+      perf-profile-level-0
+        ...
+        ...
+        speed-select-turbo-freq:disabled
+        ...
+        ...
+
+
+To check if performance can be improved using Intel(R) SST-TF feature, get the turbo
+frequency properties with Intel(R) SST-TF enabled and compare to the base turbo
+capability of this system.
+
+Get Base turbo capability
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the base turbo capability of performance level 0, execute::
+
+ # intel-speed-select perf-profile info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      perf-profile-level-0
+        ...
+        ...
+        turbo-ratio-limits-sse
+          bucket-0
+            core-count:2
+            max-turbo-frequency(MHz):3200
+          bucket-1
+            core-count:4
+            max-turbo-frequency(MHz):3100
+          bucket-2
+            core-count:6
+            max-turbo-frequency(MHz):3100
+          bucket-3
+            core-count:8
+            max-turbo-frequency(MHz):3100
+          bucket-4
+            core-count:10
+            max-turbo-frequency(MHz):3100
+          bucket-5
+            core-count:12
+            max-turbo-frequency(MHz):3100
+          bucket-6
+            core-count:14
+            max-turbo-frequency(MHz):3100
+          bucket-7
+            core-count:16
+            max-turbo-frequency(MHz):3100
+
+Based on the data above, when all the CPUS are busy, the max. frequency of 3100
+MHz can be achieved. If there is some busy workload on cpu 0 - 11 (e.g. stress)
+and on CPU 12 and 13, execute "hackbench pipe" workload::
+
+ # taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+     Total time: 5.705 [sec]
+       5.705488 usecs/op
+         175269 ops/sec
+
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package	Core	CPU	Bzy_MHz
+ 0		0	0	3000
+ 0		1	1	3000
+ 0		2	2	3000
+ 0		3	3	3000
+ 0		4	4	3000
+ 0		5	5	3100
+ 0		6	6	3100
+ 0		7	7	3000
+ 0		8	8	3100
+ 0		9	9	3000
+ 0		10	10	3000
+ 0		11	11	3000
+ 0		12	12	3100
+ 0		13	13	3100
+
+Based on turbostat output, the performance is limited by frequency cap of 3100
+MHz. To check if the hackbench performance can be improved for CPU 12 and CPU
+13, first check the capability of the Intel(R) SST-TF feature for this performance
+level.
+
+Get Intel(R) SST-TF Capability
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To get the capability, the "turbo-freq info" command can be used::
+
+ # intel-speed-select turbo-freq info -l 0
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-0
+      speed-select-turbo-freq
+          bucket-0
+            high-priority-cores-count:2
+            high-priority-max-frequency(MHz):3200
+            high-priority-max-avx2-frequency(MHz):3200
+            high-priority-max-avx512-frequency(MHz):3100
+          bucket-1
+            high-priority-cores-count:4
+            high-priority-max-frequency(MHz):3100
+            high-priority-max-avx2-frequency(MHz):3000
+            high-priority-max-avx512-frequency(MHz):2900
+          bucket-2
+            high-priority-cores-count:6
+            high-priority-max-frequency(MHz):3100
+            high-priority-max-avx2-frequency(MHz):3000
+            high-priority-max-avx512-frequency(MHz):2900
+          speed-select-turbo-freq-clip-frequencies
+            low-priority-max-frequency(MHz):2600
+            low-priority-max-avx2-frequency(MHz):2400
+            low-priority-max-avx512-frequency(MHz):2100
+
+Based on the output above, there is an Intel(R) SST-TF bucket for which there are
+two high priority cores. If only two high priority cores are set, then max.
+turbo frequency on those cores can be increased to 3200 MHz. This is 100 MHz
+more than the base turbo capability for all cores.
+
+In turn, for the hackbench workload, two CPUs can be set as high priority and
+rest as low priority. One side effect is that once enabled, the low priority
+cores will be clipped to a lower frequency of 2600 MHz.
+
+Enable Intel(R) SST-TF
+~~~~~~~~~~~~~~~~~~~~~~
+
+To enable Intel(R) SST-TF, execute::
+
+ # intel-speed-select -c 12,13 turbo-freq enable -a
+ Intel(R) Speed Select Technology
+ Executing on CPU model: X
+ package-0
+  die-0
+    cpu-12
+      turbo-freq
+        enable:success
+ package-0
+  die-0
+    cpu-13
+      turbo-freq
+        enable:success
+ package--1
+  die-0
+    cpu-63
+      turbo-freq --auto
+        enable:success
+
+In this case, the option "-a" is optional. If set, it enables Intel(R) SST-TF
+feature and also sets the CPUs to high and and low priority using Intel Speed
+Select Technology Core Power (Intel(R) SST-CP) features. The CPU numbers passed
+with "-c" arguments are marked as high priority, including its siblings.
+
+If -a option is not used, then the following steps are required before enabling
+Intel(R) SST-TF:
+
+- Discover Intel(R) SST-TF and note buckets of high priority cores and maximum frequency
+
+- Enable CLOS using core-power feature set - Configure CLOS parameters
+
+- Subscribe desired CPUs to CLOS groups making sure that high priority cores are set to the maximum frequency
+
+If the same hackbench workload is executed, schedule hackbench threads on high
+priority CPUs::
+
+ #taskset -c 12,13 perf bench -r 100 sched pipe
+ # Running 'sched/pipe' benchmark:
+ # Executed 1000000 pipe operations between two processes
+     Total time: 5.510 [sec]
+       5.510165 usecs/op
+         180826 ops/sec
+
+This improved performance by around 3.3% improvement on a busy system. Here the
+turbostat output will show that the CPU 12 and CPU 13 are getting 100 MHz boost.
+The turbostat output::
+
+ #turbostat -c 0-13 --show Package,Core,CPU,Bzy_MHz -i 1
+ Package	Core	CPU	Bzy_MHz
+ ...
+ 0		12	12	3200
+ 0		13	13	3200
diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst
index ad392f3aee06..39d80bc29ccd 100644
--- a/Documentation/admin-guide/pm/intel_pstate.rst
+++ b/Documentation/admin-guide/pm/intel_pstate.rst
@@ -62,9 +62,10 @@ on the capabilities of the processor.
 Active Mode
 -----------
 
-This is the default operation mode of ``intel_pstate``.  If it works in this
-mode, the ``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq``
-policies contains the string "intel_pstate".
+This is the default operation mode of ``intel_pstate`` for processors with
+hardware-managed P-states (HWP) support.  If it works in this mode, the
+``scaling_driver`` policy attribute in ``sysfs`` for all ``CPUFreq`` policies
+contains the string "intel_pstate".
 
 In this mode the driver bypasses the scaling governors layer of ``CPUFreq`` and
 provides its own scaling algorithms for P-state selection.  Those algorithms
@@ -138,12 +139,13 @@ internal P-state selection logic to be less performance-focused.
 Active Mode Without HWP
 ~~~~~~~~~~~~~~~~~~~~~~~
 
-This is the default operation mode for processors that do not support the HWP
-feature.  It also is used by default with the ``intel_pstate=no_hwp`` argument
-in the kernel command line.  However, in this mode ``intel_pstate`` may refuse
-to work with the given processor if it does not recognize it.  [Note that
-``intel_pstate`` will never refuse to work with any processor with the HWP
-feature enabled.]
+This operation mode is optional for processors that do not support the HWP
+feature or when the ``intel_pstate=no_hwp`` argument is passed to the kernel in
+the command line.  The active mode is used in those cases if the
+``intel_pstate=active`` argument is passed to the kernel in the command line.
+In this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.  [Note that ``intel_pstate`` will never refuse to work with
+any processor with the HWP feature enabled.]
 
 In this mode ``intel_pstate`` registers utilization update callbacks with the
 CPU scheduler in order to run a P-state selection algorithm, either
@@ -188,10 +190,14 @@ is not set.
 Passive Mode
 ------------
 
-This mode is used if the ``intel_pstate=passive`` argument is passed to the
-kernel in the command line (it implies the ``intel_pstate=no_hwp`` setting too).
-Like in the active mode without HWP support, in this mode ``intel_pstate`` may
-refuse to work with the given processor if it does not recognize it.
+This is the default operation mode of ``intel_pstate`` for processors without
+hardware-managed P-states (HWP) support.  It is always used if the
+``intel_pstate=passive`` argument is passed to the kernel in the command line
+regardless of whether or not the given processor supports HWP.  [Note that the
+``intel_pstate=no_hwp`` setting implies ``intel_pstate=passive`` if it is used
+without ``intel_pstate=active``.]  Like in the active mode without HWP support,
+in this mode ``intel_pstate`` may refuse to work with processors that are not
+recognized by it.
 
 If the driver works in this mode, the ``scaling_driver`` policy attribute in
 ``sysfs`` for all ``CPUFreq`` policies contains the string "intel_cpufreq".
diff --git a/Documentation/admin-guide/pm/working-state.rst b/Documentation/admin-guide/pm/working-state.rst
index 0a38cdf39df1..f40994c422dc 100644
--- a/Documentation/admin-guide/pm/working-state.rst
+++ b/Documentation/admin-guide/pm/working-state.rst
@@ -13,3 +13,4 @@ Working-State Power Management
    intel_pstate
    cpufreq_drivers
    intel_epb
+   intel-speed-select
diff --git a/Documentation/driver-api/pm/cpuidle.rst b/Documentation/driver-api/pm/cpuidle.rst
index 006cf6db40c6..3588bf078566 100644
--- a/Documentation/driver-api/pm/cpuidle.rst
+++ b/Documentation/driver-api/pm/cpuidle.rst
@@ -68,9 +68,8 @@ only one in the list (that is, the list was empty before) or the value of its
 governor currently in use, or the name of the new governor was passed to the
 kernel as the value of the ``cpuidle.governor=`` command line parameter, the new
 governor will be used from that point on (there can be only one ``CPUIdle``
-governor in use at a time).  Also, if ``cpuidle_sysfs_switch`` is passed to the
-kernel in the command line, user space can choose the ``CPUIdle`` governor to
-use at run time via ``sysfs``.
+governor in use at a time).  Also, user space can choose the ``CPUIdle``
+governor to use at run time via ``sysfs``.
 
 Once registered, ``CPUIdle`` governors cannot be unregistered, so it is not
 practical to put them into loadable kernel modules.
diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst
index f66c7b9126ea..946ad0b94e31 100644
--- a/Documentation/driver-api/pm/devices.rst
+++ b/Documentation/driver-api/pm/devices.rst
@@ -349,7 +349,7 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	PM core will skip the ``suspend``, ``suspend_late`` and
 	``suspend_noirq`` phases as well as all of the corresponding phases of
 	the subsequent device resume for all of these devices.	In that case,
-	the ``->complete`` callback will be invoked directly after the
+	the ``->complete`` callback will be the next one invoked after the
 	``->prepare`` callback and is entirely responsible for putting the
 	device into a consistent state as appropriate.
 
@@ -361,9 +361,9 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	runtime PM disabled.
 
 	This feature also can be controlled by device drivers by using the
-	``DPM_FLAG_NEVER_SKIP`` and ``DPM_FLAG_SMART_PREPARE`` driver power
-	management flags.  [Typically, they are set at the time the driver is
-	probed against the device in question by passing them to the
+	``DPM_FLAG_NO_DIRECT_COMPLETE`` and ``DPM_FLAG_SMART_PREPARE`` driver
+	power management flags.  [Typically, they are set at the time the driver
+	is probed against the device in question by passing them to the
 	:c:func:`dev_pm_set_driver_flags` helper function.]  If the first of
 	these flags is set, the PM core will not apply the direct-complete
 	procedure described above to the given device and, consequenty, to any
@@ -383,11 +383,15 @@ the phases are: ``prepare``, ``suspend``, ``suspend_late``, ``suspend_noirq``.
 	``->suspend`` methods provided by subsystems (bus types and PM domains
 	in particular) must follow an additional rule regarding what can be done
 	to the devices before their drivers' ``->suspend`` methods are called.
-	Namely, they can only resume the devices from runtime suspend by
-	calling :c:func:`pm_runtime_resume` for them, if that is necessary, and
+	Namely, they may resume the devices from runtime suspend by
+	calling :c:func:`pm_runtime_resume` for them, if that is necessary, but
 	they must not update the state of the devices in any other way at that
 	time (in case the drivers need to resume the devices from runtime
-	suspend in their ``->suspend`` methods).
+	suspend in their ``->suspend`` methods).  In fact, the PM core prevents
+	subsystems or drivers from putting devices into runtime suspend at
+	these times by calling :c:func:`pm_runtime_get_noresume` before issuing
+	the ``->prepare`` callback (and calling :c:func:`pm_runtime_put` after
+	issuing the ``->complete`` callback).
 
     3.	For a number of devices it is convenient to split suspend into the
 	"quiesce device" and "save device state" phases, in which cases
@@ -459,22 +463,22 @@ When resuming from freeze, standby or memory sleep, the phases are:
 
 	Note, however, that new children may be registered below the device as
 	soon as the ``->resume`` callbacks occur; it's not necessary to wait
-	until the ``complete`` phase with that.
+	until the ``complete`` phase runs.
 
 	Moreover, if the preceding ``->prepare`` callback returned a positive
 	number, the device may have been left in runtime suspend throughout the
-	whole system suspend and resume (the ``suspend``, ``suspend_late``,
-	``suspend_noirq`` phases of system suspend and the ``resume_noirq``,
-	``resume_early``, ``resume`` phases of system resume may have been
-	skipped for it).  In that case, the ``->complete`` callback is entirely
+	whole system suspend and resume (its ``->suspend``, ``->suspend_late``,
+	``->suspend_noirq``, ``->resume_noirq``,
+	``->resume_early``, and ``->resume`` callbacks may have been
+	skipped).  In that case, the ``->complete`` callback is entirely
 	responsible for putting the device into a consistent state after system
 	suspend if necessary.  [For example, it may need to queue up a runtime
 	resume request for the device for this purpose.]  To check if that is
 	the case, the ``->complete`` callback can consult the device's
-	``power.direct_complete`` flag.  Namely, if that flag is set when the
-	``->complete`` callback is being run, it has been called directly after
-	the preceding ``->prepare`` and special actions may be required
-	to make the device work correctly afterward.
+	``power.direct_complete`` flag.  If that flag is set when the
+	``->complete`` callback is being run then the direct-complete mechanism
+	was used, and special actions may be required to make the device work
+	correctly afterward.
 
 At the end of these phases, drivers should be as functional as they were before
 suspending: I/O can be performed using DMA and IRQs, and the relevant clocks are
@@ -575,10 +579,12 @@ and the phases are similar.
 
 The ``->poweroff``, ``->poweroff_late`` and ``->poweroff_noirq`` callbacks
 should do essentially the same things as the ``->suspend``, ``->suspend_late``
-and ``->suspend_noirq`` callbacks, respectively.  The only notable difference is
+and ``->suspend_noirq`` callbacks, respectively.  A notable difference is
 that they need not store the device register values, because the registers
 should already have been stored during the ``freeze``, ``freeze_late`` or
-``freeze_noirq`` phases.
+``freeze_noirq`` phases.  Also, on many machines the firmware will power-down
+the entire system, so it is not necessary for the callback to put the device in
+a low-power state.
 
 
 Leaving Hibernation
@@ -764,70 +770,119 @@ device driver in question.
 
 If it is necessary to resume a device from runtime suspend during a system-wide
 transition into a sleep state, that can be done by calling
-:c:func:`pm_runtime_resume` for it from the ``->suspend`` callback (or its
-couterpart for transitions related to hibernation) of either the device's driver
-or a subsystem responsible for it (for example, a bus type or a PM domain).
-That is guaranteed to work by the requirement that subsystems must not change
-the state of devices (possibly except for resuming them from runtime suspend)
+:c:func:`pm_runtime_resume` from the ``->suspend`` callback (or the ``->freeze``
+or ``->poweroff`` callback for transitions related to hibernation) of either the
+device's driver or its subsystem (for example, a bus type or a PM domain).
+However, subsystems must not otherwise change the runtime status of devices
 from their ``->prepare`` and ``->suspend`` callbacks (or equivalent) *before*
 invoking device drivers' ``->suspend`` callbacks (or equivalent).
 
+.. _smart_suspend_flag:
+
+The ``DPM_FLAG_SMART_SUSPEND`` Driver Flag
+------------------------------------------
+
 Some bus types and PM domains have a policy to resume all devices from runtime
 suspend upfront in their ``->suspend`` callbacks, but that may not be really
-necessary if the driver of the device can cope with runtime-suspended devices.
-The driver can indicate that by setting ``DPM_FLAG_SMART_SUSPEND`` in
-:c:member:`power.driver_flags` at the probe time, by passing it to the
-:c:func:`dev_pm_set_driver_flags` helper.  That also may cause middle-layer code
+necessary if the device's driver can cope with runtime-suspended devices.
+The driver can indicate this by setting ``DPM_FLAG_SMART_SUSPEND`` in
+:c:member:`power.driver_flags` at probe time, with the assistance of the
+:c:func:`dev_pm_set_driver_flags` helper routine.
+
+Setting that flag causes the PM core and middle-layer code
 (bus types, PM domains etc.) to skip the ``->suspend_late`` and
 ``->suspend_noirq`` callbacks provided by the driver if the device remains in
-runtime suspend at the beginning of the ``suspend_late`` phase of system-wide
-suspend (or in the ``poweroff_late`` phase of hibernation), when runtime PM
-has been disabled for it, under the assumption that its state should not change
-after that point until the system-wide transition is over (the PM core itself
-does that for devices whose "noirq", "late" and "early" system-wide PM callbacks
-are executed directly by it).  If that happens, the driver's system-wide resume
-callbacks, if present, may still be invoked during the subsequent system-wide
-resume transition and the device's runtime power management status may be set
-to "active" before enabling runtime PM for it, so the driver must be prepared to
-cope with the invocation of its system-wide resume callbacks back-to-back with
-its ``->runtime_suspend`` one (without the intervening ``->runtime_resume`` and
-so on) and the final state of the device must reflect the "active" runtime PM
-status in that case.
+runtime suspend throughout those phases of the system-wide suspend (and
+similarly for the "freeze" and "poweroff" parts of system hibernation).
+[Otherwise the same driver
+callback might be executed twice in a row for the same device, which would not
+be valid in general.]  If the middle-layer system-wide PM callbacks are present
+for the device then they are responsible for skipping these driver callbacks;
+if not then the PM core skips them.  The subsystem callback routines can
+determine whether they need to skip the driver callbacks by testing the return
+value from the :c:func:`dev_pm_skip_suspend` helper function.
+
+In addition, with ``DPM_FLAG_SMART_SUSPEND`` set, the driver's ``->thaw_noirq``
+and ``->thaw_early`` callbacks are skipped in hibernation if the device remained
+in runtime suspend throughout the preceding "freeze" transition.  Again, if the
+middle-layer callbacks are present for the device, they are responsible for
+doing this, otherwise the PM core takes care of it.
+
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` Driver Flag
+--------------------------------------------
 
 During system-wide resume from a sleep state it's easiest to put devices into
 the full-power state, as explained in :file:`Documentation/power/runtime_pm.rst`.
 [Refer to that document for more information regarding this particular issue as
 well as for information on the device runtime power management framework in
-general.]
-
-However, it often is desirable to leave devices in suspend after system
-transitions to the working state, especially if those devices had been in
+general.]  However, it often is desirable to leave devices in suspend after
+system transitions to the working state, especially if those devices had been in
 runtime suspend before the preceding system-wide suspend (or analogous)
-transition.  Device drivers can use the ``DPM_FLAG_LEAVE_SUSPENDED`` flag to
-indicate to the PM core (and middle-layer code) that they prefer the specific
-devices handled by them to be left suspended and they have no problems with
-skipping their system-wide resume callbacks for this reason.  Whether or not the
-devices will actually be left in suspend may depend on their state before the
-given system suspend-resume cycle and on the type of the system transition under
-way.  In particular, devices are not left suspended if that transition is a
-restore from hibernation, as device states are not guaranteed to be reflected
-by the information stored in the hibernation image in that case.
-
-The middle-layer code involved in the handling of the device is expected to
-indicate to the PM core if the device may be left in suspend by setting its
-:c:member:`power.may_skip_resume` status bit which is checked by the PM core
-during the "noirq" phase of the preceding system-wide suspend (or analogous)
-transition.  The middle layer is then responsible for handling the device as
-appropriate in its "noirq" resume callback, which is executed regardless of
-whether or not the device is left suspended, but the other resume callbacks
-(except for ``->complete``) will be skipped automatically by the PM core if the
-device really can be left in suspend.
-
-For devices whose "noirq", "late" and "early" driver callbacks are invoked
-directly by the PM core, all of the system-wide resume callbacks are skipped if
-``DPM_FLAG_LEAVE_SUSPENDED`` is set and the device is in runtime suspend during
-the ``suspend_noirq`` (or analogous) phase or the transition under way is a
-proper system suspend (rather than anything related to hibernation) and the
-device's wakeup settings are suitable for runtime PM (that is, it cannot
-generate wakeup signals at all or it is allowed to wake up the system from
-sleep).
+transition.
+
+To that end, device drivers can use the ``DPM_FLAG_MAY_SKIP_RESUME`` flag to
+indicate to the PM core and middle-layer code that they allow their "noirq" and
+"early" resume callbacks to be skipped if the device can be left in suspend
+after system-wide PM transitions to the working state.  Whether or not that is
+the case generally depends on the state of the device before the given system
+suspend-resume cycle and on the type of the system transition under way.
+In particular, the "thaw" and "restore" transitions related to hibernation are
+not affected by ``DPM_FLAG_MAY_SKIP_RESUME`` at all.  [All callbacks are
+issued during the "restore" transition regardless of the flag settings,
+and whether or not any driver callbacks
+are skipped during the "thaw" transition depends whether or not the
+``DPM_FLAG_SMART_SUSPEND`` flag is set (see `above <smart_suspend_flag_>`_).
+In addition, a device is not allowed to remain in runtime suspend if any of its
+children will be returned to full power.]
+
+The ``DPM_FLAG_MAY_SKIP_RESUME`` flag is taken into account in combination with
+the :c:member:`power.may_skip_resume` status bit set by the PM core during the
+"suspend" phase of suspend-type transitions.  If the driver or the middle layer
+has a reason to prevent the driver's "noirq" and "early" resume callbacks from
+being skipped during the subsequent system resume transition, it should
+clear :c:member:`power.may_skip_resume` in its ``->suspend``, ``->suspend_late``
+or ``->suspend_noirq`` callback.  [Note that the drivers setting
+``DPM_FLAG_SMART_SUSPEND`` need to clear :c:member:`power.may_skip_resume` in
+their ``->suspend`` callback in case the other two are skipped.]
+
+Setting the :c:member:`power.may_skip_resume` status bit along with the
+``DPM_FLAG_MAY_SKIP_RESUME`` flag is necessary, but generally not sufficient,
+for the driver's "noirq" and "early" resume callbacks to be skipped.  Whether or
+not they should be skipped can be determined by evaluating the
+:c:func:`dev_pm_skip_resume` helper function.
+
+If that function returns ``true``, the driver's "noirq" and "early" resume
+callbacks should be skipped and the device's runtime PM status will be set to
+"suspended" by the PM core.  Otherwise, if the device was runtime-suspended
+during the preceding system-wide suspend transition and its
+``DPM_FLAG_SMART_SUSPEND`` is set, its runtime PM status will be set to
+"active" by the PM core.  [Hence, the drivers that do not set
+``DPM_FLAG_SMART_SUSPEND`` should not expect the runtime PM status of their
+devices to be changed from "suspended" to "active" by the PM core during
+system-wide resume-type transitions.]
+
+If the ``DPM_FLAG_MAY_SKIP_RESUME`` flag is not set for a device, but
+``DPM_FLAG_SMART_SUSPEND`` is set and the driver's "late" and "noirq" suspend
+callbacks are skipped, its system-wide "noirq" and "early" resume callbacks, if
+present, are invoked as usual and the device's runtime PM status is set to
+"active" by the PM core before enabling runtime PM for it.  In that case, the
+driver must be prepared to cope with the invocation of its system-wide resume
+callbacks back-to-back with its ``->runtime_suspend`` one (without the
+intervening ``->runtime_resume`` and system-wide suspend callbacks) and the
+final state of the device must reflect the "active" runtime PM status in that
+case.  [Note that this is not a problem at all if the driver's
+``->suspend_late`` callback pointer points to the same function as its
+``->runtime_suspend`` one and its ``->resume_early`` callback pointer points to
+the same function as the ``->runtime_resume`` one, while none of the other
+system-wide suspend-resume callbacks of the driver are present, for example.]
+
+Likewise, if ``DPM_FLAG_MAY_SKIP_RESUME`` is set for a device, its driver's
+system-wide "noirq" and "early" resume callbacks may be skipped while its "late"
+and "noirq" suspend callbacks may have been executed (in principle, regardless
+of whether or not ``DPM_FLAG_SMART_SUSPEND`` is set).  In that case, the driver
+needs to be able to cope with the invocation of its ``->runtime_resume``
+callback back-to-back with its "late" and "noirq" suspend ones.  [For instance,
+that is not a concern if the driver sets both ``DPM_FLAG_SMART_SUSPEND`` and
+``DPM_FLAG_MAY_SKIP_RESUME`` and uses the same pair of suspend/resume callback
+functions for runtime PM and system-wide suspend/resume.]
diff --git a/Documentation/power/pci.rst b/Documentation/power/pci.rst
index 0924d29636ad..1831e431f725 100644
--- a/Documentation/power/pci.rst
+++ b/Documentation/power/pci.rst
@@ -1004,41 +1004,39 @@ including the PCI bus type.  The flags should be set once at the driver probe
 time with the help of the dev_pm_set_driver_flags() function and they should not
 be updated directly afterwards.
 
-The DPM_FLAG_NEVER_SKIP flag prevents the PM core from using the direct-complete
-mechanism allowing device suspend/resume callbacks to be skipped if the device
-is in runtime suspend when the system suspend starts.  That also affects all of
-the ancestors of the device, so this flag should only be used if absolutely
-necessary.
-
-The DPM_FLAG_SMART_PREPARE flag instructs the PCI bus type to only return a
-positive value from pci_pm_prepare() if the ->prepare callback provided by the
+The DPM_FLAG_NO_DIRECT_COMPLETE flag prevents the PM core from using the
+direct-complete mechanism allowing device suspend/resume callbacks to be skipped
+if the device is in runtime suspend when the system suspend starts.  That also
+affects all of the ancestors of the device, so this flag should only be used if
+absolutely necessary.
+
+The DPM_FLAG_SMART_PREPARE flag causes the PCI bus type to return a positive
+value from pci_pm_prepare() only if the ->prepare callback provided by the
 driver of the device returns a positive value.  That allows the driver to opt
-out from using the direct-complete mechanism dynamically.
+out from using the direct-complete mechanism dynamically (whereas setting
+DPM_FLAG_NO_DIRECT_COMPLETE means permanent opt-out).
 
 The DPM_FLAG_SMART_SUSPEND flag tells the PCI bus type that from the driver's
 perspective the device can be safely left in runtime suspend during system
 suspend.  That causes pci_pm_suspend(), pci_pm_freeze() and pci_pm_poweroff()
-to skip resuming the device from runtime suspend unless there are PCI-specific
-reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq(),
-pci_pm_freeze_late/noirq() and pci_pm_poweroff_late/noirq() to return early
-if the device remains in runtime suspend in the beginning of the "late" phase
-of the system-wide transition under way.  Moreover, if the device is in
-runtime suspend in pci_pm_resume_noirq() or pci_pm_restore_noirq(), its runtime
-power management status will be changed to "active" (as it is going to be put
-into D0 going forward), but if it is in runtime suspend in pci_pm_thaw_noirq(),
-the function will set the power.direct_complete flag for it (to make the PM core
-skip the subsequent "thaw" callbacks for it) and return.
-
-Setting the DPM_FLAG_LEAVE_SUSPENDED flag means that the driver prefers the
-device to be left in suspend after system-wide transitions to the working state.
-This flag is checked by the PM core, but the PCI bus type informs the PM core
-which devices may be left in suspend from its perspective (that happens during
-the "noirq" phase of system-wide suspend and analogous transitions) and next it
-uses the dev_pm_may_skip_resume() helper to decide whether or not to return from
-pci_pm_resume_noirq() early, as the PM core will skip the remaining resume
-callbacks for the device during the transition under way and will set its
-runtime PM status to "suspended" if dev_pm_may_skip_resume() returns "true" for
-it.
+to avoid resuming the device from runtime suspend unless there are PCI-specific
+reasons for doing that.  Also, it causes pci_pm_suspend_late/noirq() and
+pci_pm_poweroff_late/noirq() to return early if the device remains in runtime
+suspend during the "late" phase of the system-wide transition under way.
+Moreover, if the device is in runtime suspend in pci_pm_resume_noirq() or
+pci_pm_restore_noirq(), its runtime PM status will be changed to "active" (as it
+is going to be put into D0 going forward).
+
+Setting the DPM_FLAG_MAY_SKIP_RESUME flag means that the driver allows its
+"noirq" and "early" resume callbacks to be skipped if the device can be left
+in suspend after a system-wide transition into the working state.  This flag is
+taken into consideration by the PM core along with the power.may_skip_resume
+status bit of the device which is set by pci_pm_suspend_noirq() in certain
+situations.  If the PM core determines that the driver's "noirq" and "early"
+resume callbacks should be skipped, the dev_pm_skip_resume() helper function
+will return "true" and that will cause pci_pm_resume_noirq() and
+pci_pm_resume_early() to return upfront without touching the device and
+executing the driver callbacks.
 
 3.2. Device Runtime Power Management
 ------------------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 93d530ac49d4..0e04d5321caf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2237,6 +2237,7 @@ F:	drivers/*/qcom*
 F:	drivers/*/qcom/
 F:	drivers/bluetooth/btqcomsmd.c
 F:	drivers/clocksource/timer-qcom.c
+F:	drivers/cpuidle/cpuidle-qcom-spm.c
 F:	drivers/extcon/extcon-qcom*
 F:	drivers/i2c/busses/i2c-qcom-geni.c
 F:	drivers/i2c/busses/i2c-qup.c
diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index dee999938213..5e2bfbcf526f 100644
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -1041,7 +1041,7 @@ static int acpi_lpss_do_suspend_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_suspend_late(dev);
@@ -1093,6 +1093,9 @@ static int acpi_lpss_resume_early(struct device *dev)
 	if (pdata->dev_desc->resume_from_noirq)
 		return 0;
 
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
 	return acpi_lpss_do_resume_early(dev);
 }
 
@@ -1102,12 +1105,9 @@ static int acpi_lpss_resume_noirq(struct device *dev)
 	int ret;
 
 	/* Follow acpi_subsys_resume_noirq(). */
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	ret = pm_generic_resume_noirq(dev);
 	if (ret)
 		return ret;
@@ -1169,7 +1169,7 @@ static int acpi_lpss_poweroff_late(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pdata->dev_desc->resume_from_noirq)
@@ -1182,7 +1182,7 @@ static int acpi_lpss_poweroff_noirq(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pdata->dev_desc->resume_from_noirq) {
diff --git a/drivers/acpi/acpi_tad.c b/drivers/acpi/acpi_tad.c
index 33a4bcdaa4d7..7d45cce0c3c1 100644
--- a/drivers/acpi/acpi_tad.c
+++ b/drivers/acpi/acpi_tad.c
@@ -624,7 +624,7 @@ static int acpi_tad_probe(struct platform_device *pdev)
 	 */
 	device_init_wakeup(dev, true);
 	dev_pm_set_driver_flags(dev, DPM_FLAG_SMART_SUSPEND |
-				     DPM_FLAG_LEAVE_SUSPENDED);
+				     DPM_FLAG_MAY_SKIP_RESUME);
 	/*
 	 * The platform bus type layer tells the ACPI PM domain powers up the
 	 * device, so set the runtime PM status of it to "active".
diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c
index 5832bc10aca8..b44b12a931e7 100644
--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -1084,7 +1084,7 @@ int acpi_subsys_suspend_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_suspend_late(dev);
@@ -1100,10 +1100,8 @@ int acpi_subsys_suspend_noirq(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.may_skip_resume = true;
+	if (dev_pm_skip_suspend(dev))
 		return 0;
-	}
 
 	ret = pm_generic_suspend_noirq(dev);
 	if (ret)
@@ -1116,8 +1114,8 @@ int acpi_subsys_suspend_noirq(struct device *dev)
 	 * acpi_subsys_complete() to take care of fixing up the device's state
 	 * anyway, if need be.
 	 */
-	dev->power.may_skip_resume = device_may_wakeup(dev) ||
-					!device_can_wakeup(dev);
+	if (device_can_wakeup(dev) && !device_may_wakeup(dev))
+		dev->power.may_skip_resume = false;
 
 	return 0;
 }
@@ -1129,17 +1127,9 @@ EXPORT_SYMBOL_GPL(acpi_subsys_suspend_noirq);
  */
 static int acpi_subsys_resume_noirq(struct device *dev)
 {
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
-	/*
-	 * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
-	 * during system suspend, so update their runtime PM status to "active"
-	 * as they will be put into D0 going forward.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
 	return pm_generic_resume_noirq(dev);
 }
 
@@ -1153,7 +1143,12 @@ static int acpi_subsys_resume_noirq(struct device *dev)
  */
 static int acpi_subsys_resume_early(struct device *dev)
 {
-	int ret = acpi_dev_resume(dev);
+	int ret;
+
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
+	ret = acpi_dev_resume(dev);
 	return ret ? ret : pm_generic_resume_early(dev);
 }
 
@@ -1218,7 +1213,7 @@ static int acpi_subsys_poweroff_late(struct device *dev)
 {
 	int ret;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	ret = pm_generic_poweroff_late(dev);
@@ -1234,7 +1229,7 @@ static int acpi_subsys_poweroff_late(struct device *dev)
  */
 static int acpi_subsys_poweroff_noirq(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	return pm_generic_poweroff_noirq(dev);
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 1af2125e17d5..c44448ab19ef 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -2017,7 +2017,7 @@ bool acpi_ec_dispatch_gpe(void)
 	 */
 	ret = acpi_dispatch_gpe(NULL, first_ec->gpe);
 	if (ret == ACPI_INTERRUPT_HANDLED) {
-		pm_pr_dbg("EC GPE dispatched\n");
+		pm_pr_dbg("ACPI EC GPE dispatched\n");
 
 		/* Flush the event and query workqueues. */
 		acpi_ec_flush_work();
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index fd9d4e8318e9..31c9d0c8ae11 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -992,23 +992,31 @@ static bool acpi_s2idle_wake(void)
 		 * wakeup is pending anyway and the SCI is not the source of
 		 * it).
 		 */
-		if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq)))
+		if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) {
+			pm_pr_dbg("Wakeup unrelated to ACPI SCI\n");
 			return true;
+		}
 
 		/*
 		 * If the status bit of any enabled fixed event is set, the
 		 * wakeup is regarded as valid.
 		 */
-		if (acpi_any_fixed_event_status_set())
+		if (acpi_any_fixed_event_status_set()) {
+			pm_pr_dbg("ACPI fixed event wakeup\n");
 			return true;
+		}
 
 		/* Check wakeups from drivers sharing the SCI. */
-		if (acpi_check_wakeup_handlers())
+		if (acpi_check_wakeup_handlers()) {
+			pm_pr_dbg("ACPI custom handler wakeup\n");
 			return true;
+		}
 
 		/* Check non-EC GPE wakeups and dispatch the EC GPE. */
-		if (acpi_ec_dispatch_gpe())
+		if (acpi_ec_dispatch_gpe()) {
+			pm_pr_dbg("ACPI non-EC GPE wakeup\n");
 			return true;
+		}
 
 		/*
 		 * Cancel the SCI wakeup and process all pending events in case
@@ -1027,8 +1035,10 @@ static bool acpi_s2idle_wake(void)
 		 * are pending here, they must be resulting from the processing
 		 * of EC events above or coming from somewhere else.
 		 */
-		if (pm_wakeup_pending())
+		if (pm_wakeup_pending()) {
+			pm_pr_dbg("Wakeup after ACPI Notify sync\n");
 			return true;
+		}
 
 		rearm_wake_irq(acpi_sci_irq);
 	}
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 0e07e17c2def..bb98b813554f 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -562,72 +562,26 @@ static void dpm_watchdog_clear(struct dpm_watchdog *wd)
 /*------------------------- Resume routines -------------------------*/
 
 /**
- * suspend_event - Return a "suspend" message for given "resume" one.
- * @resume_msg: PM message representing a system-wide resume transition.
- */
-static pm_message_t suspend_event(pm_message_t resume_msg)
-{
-	switch (resume_msg.event) {
-	case PM_EVENT_RESUME:
-		return PMSG_SUSPEND;
-	case PM_EVENT_THAW:
-	case PM_EVENT_RESTORE:
-		return PMSG_FREEZE;
-	case PM_EVENT_RECOVER:
-		return PMSG_HIBERNATE;
-	}
-	return PMSG_ON;
-}
-
-/**
- * dev_pm_may_skip_resume - System-wide device resume optimization check.
+ * dev_pm_skip_resume - System-wide device resume optimization check.
  * @dev: Target device.
  *
- * Checks whether or not the device may be left in suspend after a system-wide
- * transition to the working state.
+ * Return:
+ * - %false if the transition under way is RESTORE.
+ * - Return value of dev_pm_skip_suspend() if the transition under way is THAW.
+ * - The logical negation of %power.must_resume otherwise (that is, when the
+ *   transition under way is RESUME).
  */
-bool dev_pm_may_skip_resume(struct device *dev)
+bool dev_pm_skip_resume(struct device *dev)
 {
-	return !dev->power.must_resume && pm_transition.event != PM_EVENT_RESTORE;
-}
-
-static pm_callback_t dpm_subsys_resume_noirq_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "noirq power domain ";
-		callback = pm_noirq_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "noirq type ";
-		callback = pm_noirq_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "noirq class ";
-		callback = pm_noirq_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "noirq bus ";
-		callback = pm_noirq_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
+	if (pm_transition.event == PM_EVENT_RESTORE)
+		return false;
 
-	if (info_p)
-		*info_p = info;
+	if (pm_transition.event == PM_EVENT_THAW)
+		return dev_pm_skip_suspend(dev);
 
-	return callback;
+	return !dev->power.must_resume;
 }
 
-static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev,
-						 pm_message_t state,
-						 const char **info_p);
-
-static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p);
-
 /**
  * device_resume_noirq - Execute a "noirq resume" callback for given device.
  * @dev: Device to handle.
@@ -639,8 +593,8 @@ static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
  */
 static int device_resume_noirq(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	bool skip_resume;
 	int error = 0;
 
@@ -656,37 +610,41 @@ static int device_resume_noirq(struct device *dev, pm_message_t state, bool asyn
 	if (!dpm_wait_for_superior(dev, async))
 		goto Out;
 
-	skip_resume = dev_pm_may_skip_resume(dev);
+	skip_resume = dev_pm_skip_resume(dev);
+	/*
+	 * If the driver callback is skipped below or by the middle layer
+	 * callback and device_resume_early() also skips the driver callback for
+	 * this device later, it needs to appear as "suspended" to PM-runtime,
+	 * so change its status accordingly.
+	 *
+	 * Otherwise, the device is going to be resumed, so set its PM-runtime
+	 * status to "active", but do that only if DPM_FLAG_SMART_SUSPEND is set
+	 * to avoid confusing drivers that don't use it.
+	 */
+	if (skip_resume)
+		pm_runtime_set_suspended(dev);
+	else if (dev_pm_skip_suspend(dev))
+		pm_runtime_set_active(dev);
 
-	callback = dpm_subsys_resume_noirq_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "noirq power domain ";
+		callback = pm_noirq_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "noirq type ";
+		callback = pm_noirq_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "noirq class ";
+		callback = pm_noirq_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "noirq bus ";
+		callback = pm_noirq_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
 	if (skip_resume)
 		goto Skip;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		pm_message_t suspend_msg = suspend_event(state);
-
-		/*
-		 * If "freeze" callbacks have been skipped during a transition
-		 * related to hibernation, the subsequent "thaw" callbacks must
-		 * be skipped too or bad things may happen.  Otherwise, resume
-		 * callbacks are going to be run for the device, so its runtime
-		 * PM status must be changed to reflect the new state after the
-		 * transition under way.
-		 */
-		if (!dpm_subsys_suspend_late_cb(dev, suspend_msg, NULL) &&
-		    !dpm_subsys_suspend_noirq_cb(dev, suspend_msg, NULL)) {
-			if (state.event == PM_EVENT_THAW) {
-				skip_resume = true;
-				goto Skip;
-			} else {
-				pm_runtime_set_active(dev);
-			}
-		}
-	}
-
 	if (dev->driver && dev->driver->pm) {
 		info = "noirq driver ";
 		callback = pm_noirq_op(dev->driver->pm, state);
@@ -698,20 +656,6 @@ Run:
 Skip:
 	dev->power.is_noirq_suspended = false;
 
-	if (skip_resume) {
-		/* Make the next phases of resume skip the device. */
-		dev->power.is_late_suspended = false;
-		dev->power.is_suspended = false;
-		/*
-		 * The device is going to be left in suspend, but it might not
-		 * have been in runtime suspend before the system suspended, so
-		 * its runtime PM status needs to be updated to avoid confusing
-		 * the runtime PM framework when runtime PM is enabled for the
-		 * device again.
-		 */
-		pm_runtime_set_suspended(dev);
-	}
-
 Out:
 	complete_all(&dev->power.completion);
 	TRACE_RESUME(error);
@@ -810,35 +754,6 @@ void dpm_resume_noirq(pm_message_t state)
 	cpuidle_resume();
 }
 
-static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "early power domain ";
-		callback = pm_late_early_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "early type ";
-		callback = pm_late_early_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "early class ";
-		callback = pm_late_early_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "early bus ";
-		callback = pm_late_early_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
 /**
  * device_resume_early - Execute an "early resume" callback for given device.
  * @dev: Device to handle.
@@ -849,8 +764,8 @@ static pm_callback_t dpm_subsys_resume_early_cb(struct device *dev,
  */
 static int device_resume_early(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -865,17 +780,37 @@ static int device_resume_early(struct device *dev, pm_message_t state, bool asyn
 	if (!dpm_wait_for_superior(dev, async))
 		goto Out;
 
-	callback = dpm_subsys_resume_early_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "early power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "early type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "early class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "early bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
+	if (callback)
+		goto Run;
+
+	if (dev_pm_skip_resume(dev))
+		goto Skip;
 
-	if (!callback && dev->driver && dev->driver->pm) {
+	if (dev->driver && dev->driver->pm) {
 		info = "early driver ";
 		callback = pm_late_early_op(dev->driver->pm, state);
 	}
 
+Run:
 	error = dpm_run_callback(callback, dev, state, info);
+
+Skip:
 	dev->power.is_late_suspended = false;
 
- Out:
+Out:
 	TRACE_RESUME(error);
 
 	pm_runtime_enable(dev);
@@ -1245,61 +1180,6 @@ static void dpm_superior_set_must_resume(struct device *dev)
 	device_links_read_unlock(idx);
 }
 
-static pm_callback_t dpm_subsys_suspend_noirq_cb(struct device *dev,
-						 pm_message_t state,
-						 const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "noirq power domain ";
-		callback = pm_noirq_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "noirq type ";
-		callback = pm_noirq_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "noirq class ";
-		callback = pm_noirq_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "noirq bus ";
-		callback = pm_noirq_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
-static bool device_must_resume(struct device *dev, pm_message_t state,
-			       bool no_subsys_suspend_noirq)
-{
-	pm_message_t resume_msg = resume_event(state);
-
-	/*
-	 * If all of the device driver's "noirq", "late" and "early" callbacks
-	 * are invoked directly by the core, the decision to allow the device to
-	 * stay in suspend can be based on its current runtime PM status and its
-	 * wakeup settings.
-	 */
-	if (no_subsys_suspend_noirq &&
-	    !dpm_subsys_suspend_late_cb(dev, state, NULL) &&
-	    !dpm_subsys_resume_early_cb(dev, resume_msg, NULL) &&
-	    !dpm_subsys_resume_noirq_cb(dev, resume_msg, NULL))
-		return !pm_runtime_status_suspended(dev) &&
-			(resume_msg.event != PM_EVENT_RESUME ||
-			 (device_can_wakeup(dev) && !device_may_wakeup(dev)));
-
-	/*
-	 * The only safe strategy here is to require that if the device may not
-	 * be left in suspend, resume callbacks must be invoked for it.
-	 */
-	return !dev->power.may_skip_resume;
-}
-
 /**
  * __device_suspend_noirq - Execute a "noirq suspend" callback for given device.
  * @dev: Device to handle.
@@ -1311,9 +1191,8 @@ static bool device_must_resume(struct device *dev, pm_message_t state,
  */
 static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
-	bool no_subsys_cb = false;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1327,13 +1206,23 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Complete;
 
-	callback = dpm_subsys_suspend_noirq_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "noirq power domain ";
+		callback = pm_noirq_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "noirq type ";
+		callback = pm_noirq_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "noirq class ";
+		callback = pm_noirq_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "noirq bus ";
+		callback = pm_noirq_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
-	no_subsys_cb = !dpm_subsys_suspend_late_cb(dev, state, NULL);
-
-	if (dev_pm_smart_suspend_and_suspended(dev) && no_subsys_cb)
+	if (dev_pm_skip_suspend(dev))
 		goto Skip;
 
 	if (dev->driver && dev->driver->pm) {
@@ -1351,13 +1240,16 @@ Run:
 Skip:
 	dev->power.is_noirq_suspended = true;
 
-	if (dev_pm_test_driver_flags(dev, DPM_FLAG_LEAVE_SUSPENDED)) {
-		dev->power.must_resume = dev->power.must_resume ||
-				atomic_read(&dev->power.usage_count) > 1 ||
-				device_must_resume(dev, state, no_subsys_cb);
-	} else {
+	/*
+	 * Skipping the resume of devices that were in use right before the
+	 * system suspend (as indicated by their PM-runtime usage counters)
+	 * would be suboptimal.  Also resume them if doing that is not allowed
+	 * to be skipped.
+	 */
+	if (atomic_read(&dev->power.usage_count) > 1 ||
+	    !(dev_pm_test_driver_flags(dev, DPM_FLAG_MAY_SKIP_RESUME) &&
+	      dev->power.may_skip_resume))
 		dev->power.must_resume = true;
-	}
 
 	if (dev->power.must_resume)
 		dpm_superior_set_must_resume(dev);
@@ -1474,35 +1366,6 @@ static void dpm_propagate_wakeup_to_parent(struct device *dev)
 	spin_unlock_irq(&parent->power.lock);
 }
 
-static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
-						pm_message_t state,
-						const char **info_p)
-{
-	pm_callback_t callback;
-	const char *info;
-
-	if (dev->pm_domain) {
-		info = "late power domain ";
-		callback = pm_late_early_op(&dev->pm_domain->ops, state);
-	} else if (dev->type && dev->type->pm) {
-		info = "late type ";
-		callback = pm_late_early_op(dev->type->pm, state);
-	} else if (dev->class && dev->class->pm) {
-		info = "late class ";
-		callback = pm_late_early_op(dev->class->pm, state);
-	} else if (dev->bus && dev->bus->pm) {
-		info = "late bus ";
-		callback = pm_late_early_op(dev->bus->pm, state);
-	} else {
-		return NULL;
-	}
-
-	if (info_p)
-		*info_p = info;
-
-	return callback;
-}
-
 /**
  * __device_suspend_late - Execute a "late suspend" callback for given device.
  * @dev: Device to handle.
@@ -1513,8 +1376,8 @@ static pm_callback_t dpm_subsys_suspend_late_cb(struct device *dev,
  */
 static int __device_suspend_late(struct device *dev, pm_message_t state, bool async)
 {
-	pm_callback_t callback;
-	const char *info;
+	pm_callback_t callback = NULL;
+	const char *info = NULL;
 	int error = 0;
 
 	TRACE_DEVICE(dev);
@@ -1535,12 +1398,23 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as
 	if (dev->power.syscore || dev->power.direct_complete)
 		goto Complete;
 
-	callback = dpm_subsys_suspend_late_cb(dev, state, &info);
+	if (dev->pm_domain) {
+		info = "late power domain ";
+		callback = pm_late_early_op(&dev->pm_domain->ops, state);
+	} else if (dev->type && dev->type->pm) {
+		info = "late type ";
+		callback = pm_late_early_op(dev->type->pm, state);
+	} else if (dev->class && dev->class->pm) {
+		info = "late class ";
+		callback = pm_late_early_op(dev->class->pm, state);
+	} else if (dev->bus && dev->bus->pm) {
+		info = "late bus ";
+		callback = pm_late_early_op(dev->bus->pm, state);
+	}
 	if (callback)
 		goto Run;
 
-	if (dev_pm_smart_suspend_and_suspended(dev) &&
-	    !dpm_subsys_suspend_noirq_cb(dev, state, NULL))
+	if (dev_pm_skip_suspend(dev))
 		goto Skip;
 
 	if (dev->driver && dev->driver->pm) {
@@ -1766,7 +1640,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 		dev->power.direct_complete = false;
 	}
 
-	dev->power.may_skip_resume = false;
+	dev->power.may_skip_resume = true;
 	dev->power.must_resume = false;
 
 	dpm_watchdog_set(&wd, dev);
@@ -1970,7 +1844,7 @@ unlock:
 	spin_lock_irq(&dev->power.lock);
 	dev->power.direct_complete = state.event == PM_EVENT_SUSPEND &&
 		(ret > 0 || dev->power.no_pm_callbacks) &&
-		!dev_pm_test_driver_flags(dev, DPM_FLAG_NEVER_SKIP);
+		!dev_pm_test_driver_flags(dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 	spin_unlock_irq(&dev->power.lock);
 	return 0;
 }
@@ -2128,7 +2002,7 @@ void device_pm_check_callbacks(struct device *dev)
 	spin_unlock_irq(&dev->power.lock);
 }
 
-bool dev_pm_smart_suspend_and_suspended(struct device *dev)
+bool dev_pm_skip_suspend(struct device *dev)
 {
 	return dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
 		pm_runtime_status_suspended(dev);
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 99c7da112c95..9f62790f644c 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -523,13 +523,11 @@ static int rpm_suspend(struct device *dev, int rpmflags)
 
  repeat:
 	retval = rpm_check_suspend_allowed(dev);
-
 	if (retval < 0)
-		;	/* Conditions are wrong. */
+		goto out;	/* Conditions are wrong. */
 
 	/* Synchronous suspends are not allowed in the RPM_RESUMING state. */
-	else if (dev->power.runtime_status == RPM_RESUMING &&
-	    !(rpmflags & RPM_ASYNC))
+	if (dev->power.runtime_status == RPM_RESUMING && !(rpmflags & RPM_ASYNC))
 		retval = -EAGAIN;
 	if (retval)
 		goto out;
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 2b99fe1eb207..24d25cf8ab14 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -666,7 +666,7 @@ int dpm_sysfs_add(struct device *dev)
 	if (rc)
 		return rc;
 
-	if (pm_runtime_callbacks_present(dev)) {
+	if (!pm_runtime_has_no_callbacks(dev)) {
 		rc = sysfs_merge_group(&dev->kobj, &pm_runtime_attr_group);
 		if (rc)
 			goto err_out;
@@ -709,7 +709,7 @@ int dpm_sysfs_change_owner(struct device *dev, kuid_t kuid, kgid_t kgid)
 	if (rc)
 		return rc;
 
-	if (pm_runtime_callbacks_present(dev)) {
+	if (!pm_runtime_has_no_callbacks(dev)) {
 		rc = sysfs_group_change_owner(
 			&dev->kobj, &pm_runtime_attr_group, kuid, kgid);
 		if (rc)
diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
index d5946f7486d6..374afcab89af 100644
--- a/drivers/clk/clk-qoriq.c
+++ b/drivers/clk/clk-qoriq.c
@@ -95,6 +95,7 @@ struct clockgen {
 };
 
 static struct clockgen clockgen;
+static bool add_cpufreq_dev __initdata;
 
 static void cg_out(struct clockgen *cg, u32 val, u32 __iomem *reg)
 {
@@ -1019,7 +1020,7 @@ static void __init create_muxes(struct clockgen *cg)
 	}
 }
 
-static void __init clockgen_init(struct device_node *np);
+static void __init _clockgen_init(struct device_node *np, bool legacy);
 
 /*
  * Legacy nodes may get probed before the parent clockgen node.
@@ -1030,7 +1031,7 @@ static void __init clockgen_init(struct device_node *np);
 static void __init legacy_init_clockgen(struct device_node *np)
 {
 	if (!clockgen.node)
-		clockgen_init(of_get_parent(np));
+		_clockgen_init(of_get_parent(np), true);
 }
 
 /* Legacy node */
@@ -1447,7 +1448,7 @@ static bool __init has_erratum_a4510(void)
 }
 #endif
 
-static void __init clockgen_init(struct device_node *np)
+static void __init _clockgen_init(struct device_node *np, bool legacy)
 {
 	int i, ret;
 	bool is_old_ls1021a = false;
@@ -1516,12 +1517,35 @@ static void __init clockgen_init(struct device_node *np)
 		       __func__, np, ret);
 	}
 
+	/* Don't create cpufreq device for legacy clockgen blocks */
+	add_cpufreq_dev = !legacy;
+
 	return;
 err:
 	iounmap(clockgen.regs);
 	clockgen.regs = NULL;
 }
 
+static void __init clockgen_init(struct device_node *np)
+{
+	_clockgen_init(np, false);
+}
+
+static int __init clockgen_cpufreq_init(void)
+{
+	struct platform_device *pdev;
+
+	if (add_cpufreq_dev) {
+		pdev = platform_device_register_simple("qoriq-cpufreq", -1,
+				NULL, 0);
+		if (IS_ERR(pdev))
+			pr_err("Couldn't register qoriq-cpufreq err=%ld\n",
+				PTR_ERR(pdev));
+	}
+	return 0;
+}
+device_initcall(clockgen_cpufreq_init);
+
 CLK_OF_DECLARE(qoriq_clockgen_1, "fsl,qoriq-clockgen-1.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qoriq-clockgen-2.0", clockgen_init);
 CLK_OF_DECLARE(qoriq_clockgen_b4420, "fsl,b4420-clockgen", clockgen_init);
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index 2dfb30b963c4..407f6919604c 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -114,7 +114,11 @@ static int clk_pm_runtime_get(struct clk_core *core)
 		return 0;
 
 	ret = pm_runtime_get_sync(core->dev);
-	return ret < 0 ? ret : 0;
+	if (ret < 0) {
+		pm_runtime_put_noidle(core->dev);
+		return ret;
+	}
+	return 0;
 }
 
 static void clk_pm_runtime_put(struct clk_core *core)
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index c3e6bd59e920..e91750132552 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -323,7 +323,8 @@ endif
 
 config QORIQ_CPUFREQ
 	tristate "CPU frequency scaling driver for Freescale QorIQ SoCs"
-	depends on OF && COMMON_CLK && (PPC_E500MC || ARM || ARM64)
+	depends on OF && COMMON_CLK
+	depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
 	select CLK_QORIQ
 	help
 	  This adds the CPUFreq driver support for Freescale QorIQ SoCs
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 15c1a1231516..9481292981f0 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -317,6 +317,7 @@ config ARM_TEGRA186_CPUFREQ
 config ARM_TI_CPUFREQ
 	bool "Texas Instruments CPUFreq support"
 	depends on ARCH_OMAP2PLUS
+	default ARCH_OMAP2PLUS
 	help
 	  This driver enables valid OPPs on the running platform based on
 	  values contained within the SoC in use. Enable this in order to
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index cb9db16bea61..e8e20fef400b 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -53,6 +53,7 @@ static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "renesas,r7s72100", },
 	{ .compatible = "renesas,r8a73a4", },
 	{ .compatible = "renesas,r8a7740", },
+	{ .compatible = "renesas,r8a7742", },
 	{ .compatible = "renesas,r8a7743", },
 	{ .compatible = "renesas,r8a7744", },
 	{ .compatible = "renesas,r8a7745", },
@@ -105,6 +106,7 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "calxeda,highbank", },
 	{ .compatible = "calxeda,ecx-2000", },
 
+	{ .compatible = "fsl,imx7ulp", },
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 045f9fe157ce..d03f250f68e4 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2535,26 +2535,27 @@ EXPORT_SYMBOL_GPL(cpufreq_update_limits);
 static int cpufreq_boost_set_sw(int state)
 {
 	struct cpufreq_policy *policy;
-	int ret = -EINVAL;
 
 	for_each_active_policy(policy) {
+		int ret;
+
 		if (!policy->freq_table)
-			continue;
+			return -ENXIO;
 
 		ret = cpufreq_frequency_table_cpuinfo(policy,
 						      policy->freq_table);
 		if (ret) {
 			pr_err("%s: Policy frequency update failed\n",
 			       __func__);
-			break;
+			return ret;
 		}
 
 		ret = freq_qos_update_request(policy->max_freq_req, policy->max);
 		if (ret < 0)
-			break;
+			return ret;
 	}
 
-	return ret;
+	return 0;
 }
 
 int cpufreq_boost_trigger_state(int state)
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index de206d2745fe..3fe9125156b4 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -3,7 +3,9 @@
  * Copyright 2019 NXP
  */
 
+#include <linux/clk.h>
 #include <linux/cpu.h>
+#include <linux/cpufreq.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -12,8 +14,11 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm_opp.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 
+#include "cpufreq-dt.h"
+
 #define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
 #define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
 #define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
@@ -22,20 +27,92 @@
 #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT    5
 #define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 5)
 
+#define IMX7ULP_MAX_RUN_FREQ	528000
+
 /* cpufreq-dt device registered by imx-cpufreq-dt */
 static struct platform_device *cpufreq_dt_pdev;
 static struct opp_table *cpufreq_opp_table;
+static struct device *cpu_dev;
+
+enum IMX7ULP_CPUFREQ_CLKS {
+	ARM,
+	CORE,
+	SCS_SEL,
+	HSRUN_CORE,
+	HSRUN_SCS_SEL,
+	FIRC,
+};
+
+static struct clk_bulk_data imx7ulp_clks[] = {
+	{ .id = "arm" },
+	{ .id = "core" },
+	{ .id = "scs_sel" },
+	{ .id = "hsrun_core" },
+	{ .id = "hsrun_scs_sel" },
+	{ .id = "firc" },
+};
+
+static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy,
+					     unsigned int index)
+{
+	return clk_get_rate(imx7ulp_clks[FIRC].clk);
+}
+
+static int imx7ulp_target_intermediate(struct cpufreq_policy *policy,
+					unsigned int index)
+{
+	unsigned int newfreq = policy->freq_table[index].frequency;
+
+	clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+	clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
+
+	if (newfreq > IMX7ULP_MAX_RUN_FREQ)
+		clk_set_parent(imx7ulp_clks[ARM].clk,
+			       imx7ulp_clks[HSRUN_CORE].clk);
+	else
+		clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk);
+
+	return 0;
+}
+
+static struct cpufreq_dt_platform_data imx7ulp_data = {
+	.target_intermediate = imx7ulp_target_intermediate,
+	.get_intermediate = imx7ulp_get_intermediate,
+};
 
 static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 {
-	struct device *cpu_dev = get_cpu_device(0);
+	struct platform_device *dt_pdev;
 	u32 cell_value, supported_hw[2];
 	int speed_grade, mkt_segment;
 	int ret;
 
+	cpu_dev = get_cpu_device(0);
+
 	if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
 		return -ENODEV;
 
+	if (of_machine_is_compatible("fsl,imx7ulp")) {
+		ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks),
+				   imx7ulp_clks);
+		if (ret)
+			return ret;
+
+		dt_pdev = platform_device_register_data(NULL, "cpufreq-dt",
+							-1, &imx7ulp_data,
+							sizeof(imx7ulp_data));
+		if (IS_ERR(dt_pdev)) {
+			clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
+			ret = PTR_ERR(dt_pdev);
+			dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
+			return ret;
+		}
+
+		cpufreq_dt_pdev = dt_pdev;
+
+		return 0;
+	}
+
 	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
 	if (ret)
 		return ret;
@@ -98,7 +175,10 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 static int imx_cpufreq_dt_remove(struct platform_device *pdev)
 {
 	platform_device_unregister(cpufreq_dt_pdev);
-	dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+	if (!of_machine_is_compatible("fsl,imx7ulp"))
+		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+	else
+		clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 4d3429b2058f..8e23a698ce04 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -2771,6 +2771,8 @@ static int __init intel_pstate_init(void)
 		pr_info("Invalid MSRs\n");
 		return -ENODEV;
 	}
+	/* Without HWP start in the passive mode. */
+	default_driver = &intel_cpufreq;
 
 hwp_cpu_matched:
 	/*
@@ -2816,7 +2818,6 @@ static int __init intel_pstate_setup(char *str)
 	if (!strcmp(str, "disable")) {
 		no_load = 1;
 	} else if (!strcmp(str, "passive")) {
-		pr_info("Passive mode enabled\n");
 		default_driver = &intel_cpufreq;
 		no_hwp = 1;
 	}
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index a1b8238872a2..d06b37822c3d 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -277,7 +277,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	if (!np)
 		return -ENOENT;
 
-	ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
+	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
 	if (!ret) {
 		of_node_put(np);
 		return -ENOENT;
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index 8e436dc75c8b..6b6b20da2bcf 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/slab.h>
 #include <linux/smp.h>
+#include <linux/platform_device.h>
 
 /**
  * struct cpu_data
@@ -29,12 +30,6 @@ struct cpu_data {
 	struct cpufreq_frequency_table *table;
 };
 
-/*
- * Don't use cpufreq on this SoC -- used when the SoC would have otherwise
- * matched a more generic compatible.
- */
-#define SOC_BLACKLIST		1
-
 /**
  * struct soc_data - SoC specific data
  * @flags: SOC_xxx
@@ -264,64 +259,51 @@ static struct cpufreq_driver qoriq_cpufreq_driver = {
 	.attr		= cpufreq_generic_attr,
 };
 
-static const struct soc_data blacklist = {
-	.flags = SOC_BLACKLIST,
-};
-
-static const struct of_device_id node_matches[] __initconst = {
+static const struct of_device_id qoriq_cpufreq_blacklist[] = {
 	/* e6500 cannot use cpufreq due to erratum A-008083 */
-	{ .compatible = "fsl,b4420-clockgen", &blacklist },
-	{ .compatible = "fsl,b4860-clockgen", &blacklist },
-	{ .compatible = "fsl,t2080-clockgen", &blacklist },
-	{ .compatible = "fsl,t4240-clockgen", &blacklist },
-
-	{ .compatible = "fsl,ls1012a-clockgen", },
-	{ .compatible = "fsl,ls1021a-clockgen", },
-	{ .compatible = "fsl,ls1028a-clockgen", },
-	{ .compatible = "fsl,ls1043a-clockgen", },
-	{ .compatible = "fsl,ls1046a-clockgen", },
-	{ .compatible = "fsl,ls1088a-clockgen", },
-	{ .compatible = "fsl,ls2080a-clockgen", },
-	{ .compatible = "fsl,lx2160a-clockgen", },
-	{ .compatible = "fsl,p4080-clockgen", },
-	{ .compatible = "fsl,qoriq-clockgen-1.0", },
-	{ .compatible = "fsl,qoriq-clockgen-2.0", },
+	{ .compatible = "fsl,b4420-clockgen", },
+	{ .compatible = "fsl,b4860-clockgen", },
+	{ .compatible = "fsl,t2080-clockgen", },
+	{ .compatible = "fsl,t4240-clockgen", },
 	{}
 };
 
-static int __init qoriq_cpufreq_init(void)
+static int qoriq_cpufreq_probe(struct platform_device *pdev)
 {
 	int ret;
-	struct device_node  *np;
-	const struct of_device_id *match;
-	const struct soc_data *data;
-
-	np = of_find_matching_node(NULL, node_matches);
-	if (!np)
-		return -ENODEV;
-
-	match = of_match_node(node_matches, np);
-	data = match->data;
-
-	of_node_put(np);
+	struct device_node *np;
 
-	if (data && data->flags & SOC_BLACKLIST)
+	np = of_find_matching_node(NULL, qoriq_cpufreq_blacklist);
+	if (np) {
+		dev_info(&pdev->dev, "Disabling due to erratum A-008083");
 		return -ENODEV;
+	}
 
 	ret = cpufreq_register_driver(&qoriq_cpufreq_driver);
-	if (!ret)
-		pr_info("Freescale QorIQ CPU frequency scaling driver\n");
+	if (ret)
+		return ret;
 
-	return ret;
+	dev_info(&pdev->dev, "Freescale QorIQ CPU frequency scaling driver\n");
+	return 0;
 }
-module_init(qoriq_cpufreq_init);
 
-static void __exit qoriq_cpufreq_exit(void)
+static int qoriq_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&qoriq_cpufreq_driver);
+
+	return 0;
 }
-module_exit(qoriq_cpufreq_exit);
 
+static struct platform_driver qoriq_cpufreq_platform_driver = {
+	.driver = {
+		.name = "qoriq-cpufreq",
+	},
+	.probe = qoriq_cpufreq_probe,
+	.remove = qoriq_cpufreq_remove,
+};
+module_platform_driver(qoriq_cpufreq_platform_driver);
+
+MODULE_ALIAS("platform:qoriq-cpufreq");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Tang Yuantian <Yuantian.Tang@freescale.com>");
 MODULE_DESCRIPTION("cpufreq driver for Freescale QorIQ series SoCs");
diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
index 99a2d72ac02b..51a7e89085c0 100644
--- a/drivers/cpuidle/Kconfig.arm
+++ b/drivers/cpuidle/Kconfig.arm
@@ -94,3 +94,16 @@ config ARM_TEGRA_CPUIDLE
 	select ARM_CPU_SUSPEND
 	help
 	  Select this to enable cpuidle for NVIDIA Tegra20/30/114/124 SoCs.
+
+config ARM_QCOM_SPM_CPUIDLE
+	bool "CPU Idle Driver for Qualcomm Subsystem Power Manager (SPM)"
+	depends on (ARCH_QCOM || COMPILE_TEST) && !ARM64
+	select ARM_CPU_SUSPEND
+	select CPU_IDLE_MULTIPLE_DRIVERS
+	select DT_IDLE_STATES
+	select QCOM_SCM
+	help
+	  Select this to enable cpuidle for Qualcomm processors.
+	  The Subsystem Power Manager (SPM) controls low power modes for the
+	  CPU and L2 cores. It interface with various system drivers to put
+	  the cores in low power modes.
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 55a464f6a78b..f07800cbb43f 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_ARM_PSCI_CPUIDLE)		+= cpuidle_psci.o
 cpuidle_psci-y				:= cpuidle-psci.o
 cpuidle_psci-$(CONFIG_PM_GENERIC_DOMAINS_OF) += cpuidle-psci-domain.o
 obj-$(CONFIG_ARM_TEGRA_CPUIDLE)		+= cpuidle-tegra.o
+obj-$(CONFIG_ARM_QCOM_SPM_CPUIDLE)	+= cpuidle-qcom-spm.o
 
 ###############################################################################
 # MIPS drivers
diff --git a/drivers/cpuidle/cpuidle-psci.c b/drivers/cpuidle/cpuidle-psci.c
index bae9140a65a5..d0fb585073c6 100644
--- a/drivers/cpuidle/cpuidle-psci.c
+++ b/drivers/cpuidle/cpuidle-psci.c
@@ -58,6 +58,10 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
 	u32 state;
 	int ret;
 
+	ret = cpu_pm_enter();
+	if (ret)
+		return -1;
+
 	/* Do runtime PM to manage a hierarchical CPU toplogy. */
 	pm_runtime_put_sync_suspend(pd_dev);
 
@@ -65,10 +69,12 @@ static int psci_enter_domain_idle_state(struct cpuidle_device *dev,
 	if (!state)
 		state = states[idx];
 
-	ret = psci_enter_state(idx, state);
+	ret = psci_cpu_suspend_enter(state) ? -1 : idx;
 
 	pm_runtime_get_sync(pd_dev);
 
+	cpu_pm_exit();
+
 	/* Clear the domain state to start fresh when back from idle. */
 	psci_set_domain_state(0);
 	return ret;
diff --git a/drivers/soc/qcom/spm.c b/drivers/cpuidle/cpuidle-qcom-spm.c
index 8e10e02c6aa5..adf91a6e4d7d 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/cpuidle/cpuidle-qcom-spm.c
@@ -19,10 +19,11 @@
 #include <linux/cpu_pm.h>
 #include <linux/qcom_scm.h>
 
-#include <asm/cpuidle.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
 
+#include "dt_idle_states.h"
+
 #define MAX_PMIC_DATA		2
 #define MAX_SEQ_DATA		64
 #define SPM_CTL_INDEX		0x7f
@@ -62,6 +63,7 @@ struct spm_reg_data {
 };
 
 struct spm_driver_data {
+	struct cpuidle_driver cpuidle_driver;
 	void __iomem *reg_base;
 	const struct spm_reg_data *reg_data;
 };
@@ -107,11 +109,6 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
 	.start_index[PM_SLEEP_MODE_SPC] = 2,
 };
 
-static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
-
-typedef int (*idle_fn)(void);
-static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
-
 static inline void spm_register_write(struct spm_driver_data *drv,
 					enum spm_reg reg, u32 val)
 {
@@ -172,10 +169,9 @@ static int qcom_pm_collapse(unsigned long int unused)
 	return -1;
 }
 
-static int qcom_cpu_spc(void)
+static int qcom_cpu_spc(struct spm_driver_data *drv)
 {
 	int ret;
-	struct spm_driver_data *drv = __this_cpu_read(cpu_spm_drv);
 
 	spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
 	ret = cpu_suspend(0, qcom_pm_collapse);
@@ -190,94 +186,49 @@ static int qcom_cpu_spc(void)
 	return ret;
 }
 
-static int qcom_idle_enter(unsigned long index)
+static int spm_enter_idle_state(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int idx)
 {
-	return __this_cpu_read(qcom_idle_ops)[index]();
+	struct spm_driver_data *data = container_of(drv, struct spm_driver_data,
+						    cpuidle_driver);
+
+	return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data);
 }
 
-static const struct of_device_id qcom_idle_state_match[] __initconst = {
-	{ .compatible = "qcom,idle-state-spc", .data = qcom_cpu_spc },
+static struct cpuidle_driver qcom_spm_idle_driver = {
+	.name = "qcom_spm",
+	.owner = THIS_MODULE,
+	.states[0] = {
+		.enter			= spm_enter_idle_state,
+		.exit_latency		= 1,
+		.target_residency	= 1,
+		.power_usage		= UINT_MAX,
+		.name			= "WFI",
+		.desc			= "ARM WFI",
+	}
+};
+
+static const struct of_device_id qcom_idle_state_match[] = {
+	{ .compatible = "qcom,idle-state-spc", .data = spm_enter_idle_state },
 	{ },
 };
 
-static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
+static int spm_cpuidle_init(struct cpuidle_driver *drv, int cpu)
 {
-	const struct of_device_id *match_id;
-	struct device_node *state_node;
-	int i;
-	int state_count = 1;
-	idle_fn idle_fns[CPUIDLE_STATE_MAX];
-	idle_fn *fns;
-	cpumask_t mask;
-	bool use_scm_power_down = false;
-
-	if (!qcom_scm_is_available())
-		return -EPROBE_DEFER;
-
-	for (i = 0; ; i++) {
-		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
-		if (!state_node)
-			break;
-
-		if (!of_device_is_available(state_node))
-			continue;
-
-		if (i == CPUIDLE_STATE_MAX) {
-			pr_warn("%s: cpuidle states reached max possible\n",
-					__func__);
-			break;
-		}
-
-		match_id = of_match_node(qcom_idle_state_match, state_node);
-		if (!match_id)
-			return -ENODEV;
-
-		idle_fns[state_count] = match_id->data;
-
-		/* Check if any of the states allow power down */
-		if (match_id->data == qcom_cpu_spc)
-			use_scm_power_down = true;
-
-		state_count++;
-	}
-
-	if (state_count == 1)
-		goto check_spm;
-
-	fns = devm_kcalloc(get_cpu_device(cpu), state_count, sizeof(*fns),
-			GFP_KERNEL);
-	if (!fns)
-		return -ENOMEM;
-
-	for (i = 1; i < state_count; i++)
-		fns[i] = idle_fns[i];
+	int ret;
 
-	if (use_scm_power_down) {
-		/* We have atleast one power down mode */
-		cpumask_clear(&mask);
-		cpumask_set_cpu(cpu, &mask);
-		qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask);
-	}
+	memcpy(drv, &qcom_spm_idle_driver, sizeof(*drv));
+	drv->cpumask = (struct cpumask *)cpumask_of(cpu);
 
-	per_cpu(qcom_idle_ops, cpu) = fns;
+	/* Parse idle states from device tree */
+	ret = dt_init_idle_driver(drv, qcom_idle_state_match, 1);
+	if (ret <= 0)
+		return ret ? : -ENODEV;
 
-	/*
-	 * SPM probe for the cpu should have happened by now, if the
-	 * SPM device does not exist, return -ENXIO to indicate that the
-	 * cpu does not support idle states.
-	 */
-check_spm:
-	return per_cpu(cpu_spm_drv, cpu) ? 0 : -ENXIO;
+	/* We have atleast one power down mode */
+	return qcom_scm_set_warm_boot_addr(cpu_resume_arm, drv->cpumask);
 }
 
-static const struct cpuidle_ops qcom_cpuidle_ops __initconst = {
-	.suspend = qcom_idle_enter,
-	.init = qcom_cpuidle_init,
-};
-
-CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v1, "qcom,kpss-acc-v1", &qcom_cpuidle_ops);
-CPUIDLE_METHOD_OF_DECLARE(qcom_idle_v2, "qcom,kpss-acc-v2", &qcom_cpuidle_ops);
-
 static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
 		int *spm_cpu)
 {
@@ -323,11 +274,15 @@ static int spm_dev_probe(struct platform_device *pdev)
 	struct resource *res;
 	const struct of_device_id *match_id;
 	void __iomem *addr;
-	int cpu;
+	int cpu, ret;
+
+	if (!qcom_scm_is_available())
+		return -EPROBE_DEFER;
 
 	drv = spm_get_drv(pdev, &cpu);
 	if (!drv)
 		return -EINVAL;
+	platform_set_drvdata(pdev, drv);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
@@ -340,6 +295,10 @@ static int spm_dev_probe(struct platform_device *pdev)
 
 	drv->reg_data = match_id->data;
 
+	ret = spm_cpuidle_init(&drv->cpuidle_driver, cpu);
+	if (ret)
+		return ret;
+
 	/* Write the SPM sequences first.. */
 	addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
 	__iowrite32_copy(addr, drv->reg_data->seq,
@@ -362,13 +321,20 @@ static int spm_dev_probe(struct platform_device *pdev)
 	/* Set up Standby as the default low power mode */
 	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
 
-	per_cpu(cpu_spm_drv, cpu) = drv;
+	return cpuidle_register(&drv->cpuidle_driver, NULL);
+}
+
+static int spm_dev_remove(struct platform_device *pdev)
+{
+	struct spm_driver_data *drv = platform_get_drvdata(pdev);
 
+	cpuidle_unregister(&drv->cpuidle_driver);
 	return 0;
 }
 
 static struct platform_driver spm_driver = {
 	.probe = spm_dev_probe,
+	.remove = spm_dev_remove,
 	.driver = {
 		.name = "saw",
 		.of_match_table = spm_match_table,
diff --git a/drivers/cpuidle/sysfs.c b/drivers/cpuidle/sysfs.c
index cdeedbf02646..091d1caceb41 100644
--- a/drivers/cpuidle/sysfs.c
+++ b/drivers/cpuidle/sysfs.c
@@ -18,14 +18,6 @@
 
 #include "cpuidle.h"
 
-static unsigned int sysfs_switch;
-static int __init cpuidle_sysfs_setup(char *unused)
-{
-	sysfs_switch = 1;
-	return 1;
-}
-__setup("cpuidle_sysfs_switch", cpuidle_sysfs_setup);
-
 static ssize_t show_available_governors(struct device *dev,
 					struct device_attribute *attr,
 					char *buf)
@@ -35,10 +27,10 @@ static ssize_t show_available_governors(struct device *dev,
 
 	mutex_lock(&cpuidle_lock);
 	list_for_each_entry(tmp, &cpuidle_governors, governor_list) {
-		if (i >= (ssize_t) ((PAGE_SIZE/sizeof(char)) -
-				    CPUIDLE_NAME_LEN - 2))
+		if (i >= (ssize_t) (PAGE_SIZE - (CPUIDLE_NAME_LEN + 2)))
 			goto out;
-		i += scnprintf(&buf[i], CPUIDLE_NAME_LEN, "%s ", tmp->name);
+
+		i += scnprintf(&buf[i], CPUIDLE_NAME_LEN + 1, "%s ", tmp->name);
 	}
 
 out:
@@ -85,58 +77,43 @@ static ssize_t store_current_governor(struct device *dev,
 				      struct device_attribute *attr,
 				      const char *buf, size_t count)
 {
-	char gov_name[CPUIDLE_NAME_LEN];
-	int ret = -EINVAL;
-	size_t len = count;
+	char gov_name[CPUIDLE_NAME_LEN + 1];
+	int ret;
 	struct cpuidle_governor *gov;
 
-	if (!len || len >= sizeof(gov_name))
+	ret = sscanf(buf, "%" __stringify(CPUIDLE_NAME_LEN) "s", gov_name);
+	if (ret != 1)
 		return -EINVAL;
 
-	memcpy(gov_name, buf, len);
-	gov_name[len] = '\0';
-	if (gov_name[len - 1] == '\n')
-		gov_name[--len] = '\0';
-
 	mutex_lock(&cpuidle_lock);
-
+	ret = -EINVAL;
 	list_for_each_entry(gov, &cpuidle_governors, governor_list) {
-		if (strlen(gov->name) == len && !strcmp(gov->name, gov_name)) {
+		if (!strncmp(gov->name, gov_name, CPUIDLE_NAME_LEN)) {
 			ret = cpuidle_switch_governor(gov);
 			break;
 		}
 	}
-
 	mutex_unlock(&cpuidle_lock);
 
-	if (ret)
-		return ret;
-	else
-		return count;
+	return ret ? ret : count;
 }
 
-static DEVICE_ATTR(current_driver, 0444, show_current_driver, NULL);
-static DEVICE_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
-
-static struct attribute *cpuidle_default_attrs[] = {
-	&dev_attr_current_driver.attr,
-	&dev_attr_current_governor_ro.attr,
-	NULL
-};
-
 static DEVICE_ATTR(available_governors, 0444, show_available_governors, NULL);
+static DEVICE_ATTR(current_driver, 0444, show_current_driver, NULL);
 static DEVICE_ATTR(current_governor, 0644, show_current_governor,
-		   store_current_governor);
+				   store_current_governor);
+static DEVICE_ATTR(current_governor_ro, 0444, show_current_governor, NULL);
 
-static struct attribute *cpuidle_switch_attrs[] = {
+static struct attribute *cpuidle_attrs[] = {
 	&dev_attr_available_governors.attr,
 	&dev_attr_current_driver.attr,
 	&dev_attr_current_governor.attr,
+	&dev_attr_current_governor_ro.attr,
 	NULL
 };
 
 static struct attribute_group cpuidle_attr_group = {
-	.attrs = cpuidle_default_attrs,
+	.attrs = cpuidle_attrs,
 	.name = "cpuidle",
 };
 
@@ -146,9 +123,6 @@ static struct attribute_group cpuidle_attr_group = {
  */
 int cpuidle_add_interface(struct device *dev)
 {
-	if (sysfs_switch)
-		cpuidle_attr_group.attrs = cpuidle_switch_attrs;
-
 	return sysfs_create_group(&dev->kobj, &cpuidle_attr_group);
 }
 
@@ -167,11 +141,6 @@ struct cpuidle_attr {
 	ssize_t (*store)(struct cpuidle_device *, const char *, size_t count);
 };
 
-#define define_one_ro(_name, show) \
-	static struct cpuidle_attr attr_##_name = __ATTR(_name, 0444, show, NULL)
-#define define_one_rw(_name, show, store) \
-	static struct cpuidle_attr attr_##_name = __ATTR(_name, 0644, show, store)
-
 #define attr_to_cpuidleattr(a) container_of(a, struct cpuidle_attr, attr)
 
 struct cpuidle_device_kobj {
@@ -431,12 +400,12 @@ static inline void cpuidle_remove_s2idle_attr_group(struct cpuidle_state_kobj *k
 #define attr_to_stateattr(a) container_of(a, struct cpuidle_state_attr, attr)
 
 static ssize_t cpuidle_state_show(struct kobject *kobj, struct attribute *attr,
-				  char * buf)
+				  char *buf)
 {
 	int ret = -EIO;
 	struct cpuidle_state *state = kobj_to_state(kobj);
 	struct cpuidle_state_usage *state_usage = kobj_to_state_usage(kobj);
-	struct cpuidle_state_attr * cattr = attr_to_stateattr(attr);
+	struct cpuidle_state_attr *cattr = attr_to_stateattr(attr);
 
 	if (cattr->show)
 		ret = cattr->show(state, state_usage, buf);
@@ -515,7 +484,7 @@ static int cpuidle_add_state_sysfs(struct cpuidle_device *device)
 		ret = kobject_init_and_add(&kobj->kobj, &ktype_state_cpuidle,
 					   &kdev->kobj, "state%d", i);
 		if (ret) {
-			kfree(kobj);
+			kobject_put(&kobj->kobj);
 			goto error_state;
 		}
 		cpuidle_add_s2idle_attr_group(kobj);
@@ -646,7 +615,7 @@ static int cpuidle_add_driver_sysfs(struct cpuidle_device *dev)
 	ret = kobject_init_and_add(&kdrv->kobj, &ktype_driver_cpuidle,
 				   &kdev->kobj, "driver");
 	if (ret) {
-		kfree(kdrv);
+		kobject_put(&kdrv->kobj);
 		return ret;
 	}
 
@@ -740,7 +709,7 @@ int cpuidle_add_sysfs(struct cpuidle_device *dev)
 	error = kobject_init_and_add(&kdev->kobj, &ktype_cpuidle, &cpu_dev->kobj,
 				   "cpuidle");
 	if (error) {
-		kfree(kdev);
+		kobject_put(&kdev->kobj);
 		return error;
 	}
 
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 0b1df12e0f21..37dc40d1fcfb 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -91,6 +91,14 @@ config ARM_EXYNOS_BUS_DEVFREQ
 	  and adjusts the operating frequencies and voltages with OPP support.
 	  This does not yet operate with optimal voltages.
 
+config ARM_IMX_BUS_DEVFREQ
+	tristate "i.MX Generic Bus DEVFREQ Driver"
+	depends on ARCH_MXC || COMPILE_TEST
+	select DEVFREQ_GOV_USERSPACE
+	help
+	  This adds the generic DEVFREQ driver for i.MX interconnects. It
+	  allows adjusting NIC/NOC frequency.
+
 config ARM_IMX8M_DDRC_DEVFREQ
 	tristate "i.MX8M DDRC DEVFREQ Driver"
 	depends on (ARCH_MXC && HAVE_ARM_SMCCC) || \
diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
index 3eb4d5e6635c..3ca1ad0ecb97 100644
--- a/drivers/devfreq/Makefile
+++ b/drivers/devfreq/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+= governor_passive.o
 
 # DEVFREQ Drivers
 obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
+obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ)	+= imx-bus.o
 obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
 obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
 obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 6fecd11dafdd..52b9c3e141f3 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -60,12 +60,12 @@ static struct devfreq *find_device_devfreq(struct device *dev)
 {
 	struct devfreq *tmp_devfreq;
 
+	lockdep_assert_held(&devfreq_list_lock);
+
 	if (IS_ERR_OR_NULL(dev)) {
 		pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
-	WARN(!mutex_is_locked(&devfreq_list_lock),
-	     "devfreq_list_lock must be locked.");
 
 	list_for_each_entry(tmp_devfreq, &devfreq_list, node) {
 		if (tmp_devfreq->dev.parent == dev)
@@ -258,12 +258,12 @@ static struct devfreq_governor *find_devfreq_governor(const char *name)
 {
 	struct devfreq_governor *tmp_governor;
 
+	lockdep_assert_held(&devfreq_list_lock);
+
 	if (IS_ERR_OR_NULL(name)) {
 		pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
-	WARN(!mutex_is_locked(&devfreq_list_lock),
-	     "devfreq_list_lock must be locked.");
 
 	list_for_each_entry(tmp_governor, &devfreq_governor_list, node) {
 		if (!strncmp(tmp_governor->name, name, DEVFREQ_NAME_LEN))
@@ -289,12 +289,12 @@ static struct devfreq_governor *try_then_request_governor(const char *name)
 	struct devfreq_governor *governor;
 	int err = 0;
 
+	lockdep_assert_held(&devfreq_list_lock);
+
 	if (IS_ERR_OR_NULL(name)) {
 		pr_err("DEVFREQ: %s: Invalid parameters\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
-	WARN(!mutex_is_locked(&devfreq_list_lock),
-	     "devfreq_list_lock must be locked.");
 
 	governor = find_devfreq_governor(name);
 	if (IS_ERR(governor)) {
@@ -392,10 +392,7 @@ int update_devfreq(struct devfreq *devfreq)
 	int err = 0;
 	u32 flags = 0;
 
-	if (!mutex_is_locked(&devfreq->lock)) {
-		WARN(true, "devfreq->lock must be locked by the caller.\n");
-		return -EINVAL;
-	}
+	lockdep_assert_held(&devfreq->lock);
 
 	if (!devfreq->governor)
 		return -EINVAL;
@@ -768,7 +765,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	devfreq->dev.release = devfreq_dev_release;
 	INIT_LIST_HEAD(&devfreq->node);
 	devfreq->profile = profile;
-	strncpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
+	strscpy(devfreq->governor_name, governor_name, DEVFREQ_NAME_LEN);
 	devfreq->previous_freq = profile->initial_freq;
 	devfreq->last_status.current_frequency = profile->initial_freq;
 	devfreq->data = data;
diff --git a/drivers/devfreq/imx-bus.c b/drivers/devfreq/imx-bus.c
new file mode 100644
index 000000000000..4f38455ad742
--- /dev/null
+++ b/drivers/devfreq/imx-bus.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <linux/clk.h>
+#include <linux/devfreq.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct imx_bus {
+	struct devfreq_dev_profile profile;
+	struct devfreq *devfreq;
+	struct clk *clk;
+	struct platform_device *icc_pdev;
+};
+
+static int imx_bus_target(struct device *dev,
+		unsigned long *freq, u32 flags)
+{
+	struct dev_pm_opp *new_opp;
+	int ret;
+
+	new_opp = devfreq_recommended_opp(dev, freq, flags);
+	if (IS_ERR(new_opp)) {
+		ret = PTR_ERR(new_opp);
+		dev_err(dev, "failed to get recommended opp: %d\n", ret);
+		return ret;
+	}
+	dev_pm_opp_put(new_opp);
+
+	return dev_pm_opp_set_rate(dev, *freq);
+}
+
+static int imx_bus_get_cur_freq(struct device *dev, unsigned long *freq)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	*freq = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static int imx_bus_get_dev_status(struct device *dev,
+		struct devfreq_dev_status *stat)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	stat->busy_time = 0;
+	stat->total_time = 0;
+	stat->current_frequency = clk_get_rate(priv->clk);
+
+	return 0;
+}
+
+static void imx_bus_exit(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+
+	dev_pm_opp_of_remove_table(dev);
+	platform_device_unregister(priv->icc_pdev);
+}
+
+/* imx_bus_init_icc() - register matching icc provider if required */
+static int imx_bus_init_icc(struct device *dev)
+{
+	struct imx_bus *priv = dev_get_drvdata(dev);
+	const char *icc_driver_name;
+
+	if (!of_get_property(dev->of_node, "#interconnect-cells", 0))
+		return 0;
+	if (!IS_ENABLED(CONFIG_INTERCONNECT_IMX)) {
+		dev_warn(dev, "imx interconnect drivers disabled\n");
+		return 0;
+	}
+
+	icc_driver_name = of_device_get_match_data(dev);
+	if (!icc_driver_name) {
+		dev_err(dev, "unknown interconnect driver\n");
+		return 0;
+	}
+
+	priv->icc_pdev = platform_device_register_data(
+			dev, icc_driver_name, -1, NULL, 0);
+	if (IS_ERR(priv->icc_pdev)) {
+		dev_err(dev, "failed to register icc provider %s: %ld\n",
+				icc_driver_name, PTR_ERR(priv->icc_pdev));
+		return PTR_ERR(priv->icc_pdev);
+	}
+
+	return 0;
+}
+
+static int imx_bus_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct imx_bus *priv;
+	const char *gov = DEVFREQ_GOV_USERSPACE;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/*
+	 * Fetch the clock to adjust but don't explicitly enable.
+	 *
+	 * For imx bus clock clk_set_rate is safe no matter if the clock is on
+	 * or off and some peripheral side-buses might be off unless enabled by
+	 * drivers for devices on those specific buses.
+	 *
+	 * Rate adjustment on a disabled bus clock just takes effect later.
+	 */
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		ret = PTR_ERR(priv->clk);
+		dev_err(dev, "failed to fetch clk: %d\n", ret);
+		return ret;
+	}
+	platform_set_drvdata(pdev, priv);
+
+	ret = dev_pm_opp_of_add_table(dev);
+	if (ret < 0) {
+		dev_err(dev, "failed to get OPP table\n");
+		return ret;
+	}
+
+	priv->profile.polling_ms = 1000;
+	priv->profile.target = imx_bus_target;
+	priv->profile.get_dev_status = imx_bus_get_dev_status;
+	priv->profile.exit = imx_bus_exit;
+	priv->profile.get_cur_freq = imx_bus_get_cur_freq;
+	priv->profile.initial_freq = clk_get_rate(priv->clk);
+
+	priv->devfreq = devm_devfreq_add_device(dev, &priv->profile,
+						gov, NULL);
+	if (IS_ERR(priv->devfreq)) {
+		ret = PTR_ERR(priv->devfreq);
+		dev_err(dev, "failed to add devfreq device: %d\n", ret);
+		goto err;
+	}
+
+	ret = imx_bus_init_icc(dev);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_pm_opp_of_remove_table(dev);
+	return ret;
+}
+
+static const struct of_device_id imx_bus_of_match[] = {
+	{ .compatible = "fsl,imx8mq-noc", .data = "imx8mq-interconnect", },
+	{ .compatible = "fsl,imx8mm-noc", .data = "imx8mm-interconnect", },
+	{ .compatible = "fsl,imx8mn-noc", .data = "imx8mn-interconnect", },
+	{ .compatible = "fsl,imx8m-noc", },
+	{ .compatible = "fsl,imx8m-nic", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, imx_bus_of_match);
+
+static struct platform_driver imx_bus_platdrv = {
+	.probe		= imx_bus_probe,
+	.driver = {
+		.name	= "imx-bus-devfreq",
+		.of_match_table = of_match_ptr(imx_bus_of_match),
+	},
+};
+module_platform_driver(imx_bus_platdrv);
+
+MODULE_DESCRIPTION("Generic i.MX bus frequency scaling driver");
+MODULE_AUTHOR("Leonard Crestez <leonard.crestez@nxp.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 28b2c7ca416e..e94a27804c20 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -420,7 +420,7 @@ tegra_actmon_cpufreq_contribution(struct tegra_devfreq *tegra,
 
 	static_cpu_emc_freq = actmon_cpu_to_emc_rate(tegra, cpu_freq);
 
-	if (dev_freq >= static_cpu_emc_freq)
+	if (dev_freq + actmon_dev->boost_freq >= static_cpu_emc_freq)
 		return 0;
 
 	return static_cpu_emc_freq;
@@ -807,10 +807,9 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	}
 
 	err = platform_get_irq(pdev, 0);
-	if (err < 0) {
-		dev_err(&pdev->dev, "Failed to get IRQ: %d\n", err);
+	if (err < 0)
 		return err;
-	}
+
 	tegra->irq = err;
 
 	irq_set_status_flags(tegra->irq, IRQ_NOAUTOEN);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
index fd1dc3236eca..a9086ea1ab60 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c
@@ -191,7 +191,7 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (adev->runpm) {
-		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c
index ad719c9602af..9cb2d7548daa 100644
--- a/drivers/gpu/drm/i915/intel_runtime_pm.c
+++ b/drivers/gpu/drm/i915/intel_runtime_pm.c
@@ -549,7 +549,7 @@ void intel_runtime_pm_enable(struct intel_runtime_pm *rpm)
 	 * becaue the HDA driver may require us to enable the audio power
 	 * domain during system suspend.
 	 */
-	dev_pm_set_driver_flags(kdev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(kdev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_set_autosuspend_delay(kdev, 10000); /* 10s */
 	pm_runtime_mark_last_busy(kdev);
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 58176db85952..372962358a18 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -158,7 +158,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (radeon_is_px(dev)) {
-		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 5536673060cc..c429d664f655 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -357,12 +357,12 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_LEAVE_SUSPENDED);
+					DPM_FLAG_MAY_SKIP_RESUME);
 	} else {
 		dev_pm_set_driver_flags(&pdev->dev,
 					DPM_FLAG_SMART_PREPARE |
 					DPM_FLAG_SMART_SUSPEND |
-					DPM_FLAG_LEAVE_SUSPENDED);
+					DPM_FLAG_MAY_SKIP_RESUME);
 	}
 
 	/* The code below assumes runtime PM to be disabled. */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index a1ed375fed37..71f795b510ce 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -241,7 +241,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * MEI requires to resume from runtime suspend mode
 	 * in order to perform link reset flow upon system suspend.
 	 */
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	/*
 	 * ME maps runtime suspend/resume to D0i states,
diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c
index beacf2a2f2b5..4bf26ce61044 100644
--- a/drivers/misc/mei/pci-txe.c
+++ b/drivers/misc/mei/pci-txe.c
@@ -128,7 +128,7 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * MEI requires to resume from runtime suspend mode
 	 * in order to perform link reset flow upon system suspend.
 	 */
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	/*
 	 * TXE maps runtime suspend/resume to own power gating states,
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 177c6da80c57..2730b1c7dddb 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -7549,7 +7549,7 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	e1000_print_device_info(adapter);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
 		pm_runtime_put_noidle(&pdev->dev);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index b46bff8fe056..8bb3db2cbd41 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -3445,7 +3445,7 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_put_noidle(&pdev->dev);
 	return 0;
diff --git a/drivers/net/ethernet/intel/igc/igc_main.c b/drivers/net/ethernet/intel/igc/igc_main.c
index 69fa1ce1f927..59fc0097438f 100644
--- a/drivers/net/ethernet/intel/igc/igc_main.c
+++ b/drivers/net/ethernet/intel/igc/igc_main.c
@@ -4825,7 +4825,7 @@ static int igc_probe(struct pci_dev *pdev,
 	pcie_print_link_status(pdev);
 	netdev_info(netdev, "MAC: %pM\n", netdev->dev_addr);
 
-	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NEVER_SKIP);
+	dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
 
 	pm_runtime_put_noidle(&pdev->dev);
 
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 312cc45c44c7..bf779f291f15 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -275,7 +275,7 @@ static int pciehp_suspend(struct pcie_device *dev)
 	 * If the port is already runtime suspended we can keep it that
 	 * way.
 	 */
-	if (dev_pm_smart_suspend_and_suspended(&dev->port->dev))
+	if (dev_pm_skip_suspend(&dev->port->dev))
 		return 0;
 
 	pciehp_disable_interrupt(dev);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 0454ca0e4e3f..da6510af1221 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -776,7 +776,7 @@ static int pci_pm_suspend(struct device *dev)
 
 static int pci_pm_suspend_late(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
@@ -789,10 +789,8 @@ static int pci_pm_suspend_noirq(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (dev_pm_smart_suspend_and_suspended(dev)) {
-		dev->power.may_skip_resume = true;
+	if (dev_pm_skip_suspend(dev))
 		return 0;
-	}
 
 	if (pci_has_legacy_pm_support(pci_dev))
 		return pci_legacy_suspend_late(dev, PMSG_SUSPEND);
@@ -880,8 +878,8 @@ Fixup:
 	 * pci_pm_complete() to take care of fixing up the device's state
 	 * anyway, if need be.
 	 */
-	dev->power.may_skip_resume = device_may_wakeup(dev) ||
-					!device_can_wakeup(dev);
+	if (device_can_wakeup(dev) && !device_may_wakeup(dev))
+		dev->power.may_skip_resume = false;
 
 	return 0;
 }
@@ -893,18 +891,10 @@ static int pci_pm_resume_noirq(struct device *dev)
 	pci_power_t prev_state = pci_dev->current_state;
 	bool skip_bus_pm = pci_dev->skip_bus_pm;
 
-	if (dev_pm_may_skip_resume(dev))
+	if (dev_pm_skip_resume(dev))
 		return 0;
 
 	/*
-	 * Devices with DPM_FLAG_SMART_SUSPEND may be left in runtime suspend
-	 * during system suspend, so update their runtime PM status to "active"
-	 * as they are going to be put into D0 shortly.
-	 */
-	if (dev_pm_smart_suspend_and_suspended(dev))
-		pm_runtime_set_active(dev);
-
-	/*
 	 * In the suspend-to-idle case, devices left in D0 during suspend will
 	 * stay in D0, so it is not necessary to restore or update their
 	 * configuration here and attempting to put them into D0 again is
@@ -928,6 +918,14 @@ static int pci_pm_resume_noirq(struct device *dev)
 	return 0;
 }
 
+static int pci_pm_resume_early(struct device *dev)
+{
+	if (dev_pm_skip_resume(dev))
+		return 0;
+
+	return pm_generic_resume_early(dev);
+}
+
 static int pci_pm_resume(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -961,6 +959,7 @@ static int pci_pm_resume(struct device *dev)
 #define pci_pm_suspend_late	NULL
 #define pci_pm_suspend_noirq	NULL
 #define pci_pm_resume		NULL
+#define pci_pm_resume_early	NULL
 #define pci_pm_resume_noirq	NULL
 
 #endif /* !CONFIG_SUSPEND */
@@ -1127,7 +1126,7 @@ static int pci_pm_poweroff(struct device *dev)
 
 static int pci_pm_poweroff_late(struct device *dev)
 {
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	pci_fixup_device(pci_fixup_suspend, to_pci_dev(dev));
@@ -1140,7 +1139,7 @@ static int pci_pm_poweroff_noirq(struct device *dev)
 	struct pci_dev *pci_dev = to_pci_dev(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
-	if (dev_pm_smart_suspend_and_suspended(dev))
+	if (dev_pm_skip_suspend(dev))
 		return 0;
 
 	if (pci_has_legacy_pm_support(pci_dev))
@@ -1358,6 +1357,7 @@ static const struct dev_pm_ops pci_dev_pm_ops = {
 	.suspend = pci_pm_suspend,
 	.suspend_late = pci_pm_suspend_late,
 	.resume = pci_pm_resume,
+	.resume_early = pci_pm_resume_early,
 	.freeze = pci_pm_freeze,
 	.thaw = pci_pm_thaw,
 	.poweroff = pci_pm_poweroff,
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index 160d67c59310..3acf151ae015 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -115,7 +115,7 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
 
 	pci_save_state(dev);
 
-	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NEVER_SKIP |
+	dev_pm_set_driver_flags(&dev->dev, DPM_FLAG_NO_DIRECT_COMPLETE |
 					   DPM_FLAG_SMART_SUSPEND);
 
 	if (pci_bridge_d3_possible(dev)) {
diff --git a/drivers/powercap/intel_rapl_common.c b/drivers/powercap/intel_rapl_common.c
index eb328655bc01..61a63a16b5e7 100644
--- a/drivers/powercap/intel_rapl_common.c
+++ b/drivers/powercap/intel_rapl_common.c
@@ -26,9 +26,6 @@
 #include <asm/cpu_device_id.h>
 #include <asm/intel-family.h>
 
-/* Local defines */
-#define MSR_PLATFORM_POWER_LIMIT	0x0000065C
-
 /* bitmasks for RAPL MSRs, used by primitive access functions */
 #define ENERGY_STATUS_MASK      0xffffffff
 
@@ -989,6 +986,7 @@ static const struct x86_cpu_id rapl_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT,	&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D,	&rapl_defaults_core),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&rapl_defaults_core),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&rapl_defaults_core),
 
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index bf42a17a45de..285baa7e474e 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -80,16 +80,6 @@ config QCOM_PDR_HELPERS
 	tristate
 	select QCOM_QMI_HELPERS
 
-config QCOM_PM
-	bool "Qualcomm Power Management"
-	depends on ARCH_QCOM && !ARM64
-	select ARM_CPU_SUSPEND
-	select QCOM_SCM
-	help
-	  QCOM Platform specific power driver to manage cores and L2 low power
-	  modes. It interface with various system drivers to put the cores in
-	  low power modes.
-
 config QCOM_QMI_HELPERS
 	tristate
 	depends on NET
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 5d6b83dc58e8..92cc4232d72c 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_QCOM_GSBI)	+=	qcom_gsbi.o
 obj-$(CONFIG_QCOM_MDT_LOADER)	+= mdt_loader.o
 obj-$(CONFIG_QCOM_OCMEM)	+= ocmem.o
 obj-$(CONFIG_QCOM_PDR_HELPERS)	+= pdr_interface.o
-obj-$(CONFIG_QCOM_PM)	+=	spm.o
 obj-$(CONFIG_QCOM_QMI_HELPERS)	+= qmi_helpers.o
 qmi_helpers-y	+= qmi_encdec.o qmi_interface.o
 obj-$(CONFIG_QCOM_RMTFS_MEM)	+= rmtfs_mem.o
diff --git a/fs/block_dev.c b/fs/block_dev.c
index f05e2f2c898d..1e3030dd43ba 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -2022,8 +2022,7 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
 	if (bdev_read_only(I_BDEV(bd_inode)))
 		return -EPERM;
 
-	/* uswsusp needs write permission to the swap */
-	if (IS_SWAPFILE(bd_inode) && !hibernation_available())
+	if (IS_SWAPFILE(bd_inode) && !is_hibernate_resume_dev(bd_inode))
 		return -ETXTBSY;
 
 	if (!iov_iter_count(from))
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index f7240251a949..67d5950bd878 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -330,7 +330,7 @@ struct cpufreq_driver {
 	 *
 	 * get_intermediate should return a stable intermediate frequency
 	 * platform wants to switch to and target_intermediate() should set CPU
-	 * to to that frequency, before jumping to the frequency corresponding
+	 * to that frequency, before jumping to the frequency corresponding
 	 * to 'index'. Core will take care of sending notifications and driver
 	 * doesn't have to handle them in target_intermediate() or
 	 * target_index().
diff --git a/include/linux/pm.h b/include/linux/pm.h
index e057d1fa2469..121c104a4090 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -544,31 +544,17 @@ struct pm_subsys_data {
  * These flags can be set by device drivers at the probe time.  They need not be
  * cleared by the drivers as the driver core will take care of that.
  *
- * NEVER_SKIP: Do not skip all system suspend/resume callbacks for the device.
- * SMART_PREPARE: Check the return value of the driver's ->prepare callback.
- * SMART_SUSPEND: No need to resume the device from runtime suspend.
- * LEAVE_SUSPENDED: Avoid resuming the device during system resume if possible.
- *
- * Setting SMART_PREPARE instructs bus types and PM domains which may want
- * system suspend/resume callbacks to be skipped for the device to return 0 from
- * their ->prepare callbacks if the driver's ->prepare callback returns 0 (in
- * other words, the system suspend/resume callbacks can only be skipped for the
- * device if its driver doesn't object against that).  This flag has no effect
- * if NEVER_SKIP is set.
- *
- * Setting SMART_SUSPEND instructs bus types and PM domains which may want to
- * runtime resume the device upfront during system suspend that doing so is not
- * necessary from the driver's perspective.  It also may cause them to skip
- * invocations of the ->suspend_late and ->suspend_noirq callbacks provided by
- * the driver if they decide to leave the device in runtime suspend.
- *
- * Setting LEAVE_SUSPENDED informs the PM core and middle-layer code that the
- * driver prefers the device to be left in suspend after system resume.
+ * NO_DIRECT_COMPLETE: Do not apply direct-complete optimization to the device.
+ * SMART_PREPARE: Take the driver ->prepare callback return value into account.
+ * SMART_SUSPEND: Avoid resuming the device from runtime suspend.
+ * MAY_SKIP_RESUME: Allow driver "noirq" and "early" callbacks to be skipped.
+ *
+ * See Documentation/driver-api/pm/devices.rst for details.
  */
-#define DPM_FLAG_NEVER_SKIP		BIT(0)
+#define DPM_FLAG_NO_DIRECT_COMPLETE	BIT(0)
 #define DPM_FLAG_SMART_PREPARE		BIT(1)
 #define DPM_FLAG_SMART_SUSPEND		BIT(2)
-#define DPM_FLAG_LEAVE_SUSPENDED	BIT(3)
+#define DPM_FLAG_MAY_SKIP_RESUME	BIT(3)
 
 struct dev_pm_info {
 	pm_message_t		power_state;
@@ -758,8 +744,8 @@ extern int pm_generic_poweroff_late(struct device *dev);
 extern int pm_generic_poweroff(struct device *dev);
 extern void pm_generic_complete(struct device *dev);
 
-extern bool dev_pm_may_skip_resume(struct device *dev);
-extern bool dev_pm_smart_suspend_and_suspended(struct device *dev);
+extern bool dev_pm_skip_resume(struct device *dev);
+extern bool dev_pm_skip_suspend(struct device *dev);
 
 #else /* !CONFIG_PM_SLEEP */
 
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 3bdcbce8141a..3dbc207bff53 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -102,9 +102,9 @@ static inline bool pm_runtime_enabled(struct device *dev)
 	return !dev->power.disable_depth;
 }
 
-static inline bool pm_runtime_callbacks_present(struct device *dev)
+static inline bool pm_runtime_has_no_callbacks(struct device *dev)
 {
-	return !dev->power.no_callbacks;
+	return dev->power.no_callbacks;
 }
 
 static inline void pm_runtime_mark_last_busy(struct device *dev)
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 4fcc6fd0cbd6..b960098acfb0 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -466,6 +466,12 @@ static inline bool system_entering_hibernation(void) { return false; }
 static inline bool hibernation_available(void) { return false; }
 #endif /* CONFIG_HIBERNATION */
 
+#ifdef CONFIG_HIBERNATION_SNAPSHOT_DEV
+int is_hibernate_resume_dev(const struct inode *);
+#else
+static inline int is_hibernate_resume_dev(const struct inode *i) { return 0; }
+#endif
+
 /* Hibernation and suspend events */
 #define PM_HIBERNATION_PREPARE	0x0001 /* Going to hibernate */
 #define PM_POST_HIBERNATION	0x0002 /* Hibernation finished */
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index c208566c844b..4d0e6e815a2b 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -80,6 +80,18 @@ config HIBERNATION
 
 	  For more information take a look at <file:Documentation/power/swsusp.rst>.
 
+config HIBERNATION_SNAPSHOT_DEV
+	bool "Userspace snapshot device"
+	depends on HIBERNATION
+	default y
+	---help---
+	  Device used by the uswsusp tools.
+
+	  Say N if no snapshotting from userspace is needed, this also
+	  reduces the attack surface of the kernel.
+
+	  If in doubt, say Y.
+
 config PM_STD_PARTITION
 	string "Default resume partition"
 	depends on HIBERNATION
diff --git a/kernel/power/Makefile b/kernel/power/Makefile
index e7e47d9be1e5..5899260a8bef 100644
--- a/kernel/power/Makefile
+++ b/kernel/power/Makefile
@@ -10,7 +10,8 @@ obj-$(CONFIG_VT_CONSOLE_SLEEP)	+= console.o
 obj-$(CONFIG_FREEZER)		+= process.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o
 obj-$(CONFIG_PM_TEST_SUSPEND)	+= suspend_test.o
-obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o user.o
+obj-$(CONFIG_HIBERNATION)	+= hibernate.o snapshot.o swap.o
+obj-$(CONFIG_HIBERNATION_SNAPSHOT_DEV) += user.o
 obj-$(CONFIG_PM_AUTOSLEEP)	+= autosleep.o
 obj-$(CONFIG_PM_WAKELOCKS)	+= wakelock.o
 
diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
index 30bd28d1d418..02ec716a4927 100644
--- a/kernel/power/hibernate.c
+++ b/kernel/power/hibernate.c
@@ -67,6 +67,18 @@ bool freezer_test_done;
 
 static const struct platform_hibernation_ops *hibernation_ops;
 
+static atomic_t hibernate_atomic = ATOMIC_INIT(1);
+
+bool hibernate_acquire(void)
+{
+	return atomic_add_unless(&hibernate_atomic, -1, 0);
+}
+
+void hibernate_release(void)
+{
+	atomic_inc(&hibernate_atomic);
+}
+
 bool hibernation_available(void)
 {
 	return nohibernate == 0 && !security_locked_down(LOCKDOWN_HIBERNATION);
@@ -704,7 +716,7 @@ int hibernate(void)
 
 	lock_system_sleep();
 	/* The snapshot device should not be opened while we're running */
-	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
+	if (!hibernate_acquire()) {
 		error = -EBUSY;
 		goto Unlock;
 	}
@@ -775,7 +787,7 @@ int hibernate(void)
  Exit:
 	__pm_notifier_call_chain(PM_POST_HIBERNATION, nr_calls, NULL);
 	pm_restore_console();
-	atomic_inc(&snapshot_device_available);
+	hibernate_release();
  Unlock:
 	unlock_system_sleep();
 	pr_info("hibernation exit\n");
@@ -880,7 +892,7 @@ static int software_resume(void)
 		goto Unlock;
 
 	/* The snapshot device should not be opened while we're running */
-	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
+	if (!hibernate_acquire()) {
 		error = -EBUSY;
 		swsusp_close(FMODE_READ);
 		goto Unlock;
@@ -911,7 +923,7 @@ static int software_resume(void)
 	__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
 	pm_restore_console();
 	pr_info("resume failed (%d)\n", error);
-	atomic_inc(&snapshot_device_available);
+	hibernate_release();
 	/* For success case, the suspend path will release the lock */
  Unlock:
 	mutex_unlock(&system_transition_mutex);
diff --git a/kernel/power/power.h b/kernel/power/power.h
index 7cdc64dc2373..ba2094db6294 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -154,8 +154,8 @@ extern int snapshot_write_next(struct snapshot_handle *handle);
 extern void snapshot_write_finalize(struct snapshot_handle *handle);
 extern int snapshot_image_loaded(struct snapshot_handle *handle);
 
-/* If unset, the snapshot device cannot be open. */
-extern atomic_t snapshot_device_available;
+extern bool hibernate_acquire(void);
+extern void hibernate_release(void);
 
 extern sector_t alloc_swapdev_block(int swap);
 extern void free_all_swap_pages(int swap);
diff --git a/kernel/power/user.c b/kernel/power/user.c
index 7959449765d9..d5eedc2baa2a 100644
--- a/kernel/power/user.c
+++ b/kernel/power/user.c
@@ -35,9 +35,13 @@ static struct snapshot_data {
 	bool ready;
 	bool platform_support;
 	bool free_bitmaps;
+	struct inode *bd_inode;
 } snapshot_state;
 
-atomic_t snapshot_device_available = ATOMIC_INIT(1);
+int is_hibernate_resume_dev(const struct inode *bd_inode)
+{
+	return hibernation_available() && snapshot_state.bd_inode == bd_inode;
+}
 
 static int snapshot_open(struct inode *inode, struct file *filp)
 {
@@ -49,13 +53,13 @@ static int snapshot_open(struct inode *inode, struct file *filp)
 
 	lock_system_sleep();
 
-	if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
+	if (!hibernate_acquire()) {
 		error = -EBUSY;
 		goto Unlock;
 	}
 
 	if ((filp->f_flags & O_ACCMODE) == O_RDWR) {
-		atomic_inc(&snapshot_device_available);
+		hibernate_release();
 		error = -ENOSYS;
 		goto Unlock;
 	}
@@ -92,11 +96,12 @@ static int snapshot_open(struct inode *inode, struct file *filp)
 			__pm_notifier_call_chain(PM_POST_RESTORE, nr_calls, NULL);
 	}
 	if (error)
-		atomic_inc(&snapshot_device_available);
+		hibernate_release();
 
 	data->frozen = false;
 	data->ready = false;
 	data->platform_support = false;
+	data->bd_inode = NULL;
 
  Unlock:
 	unlock_system_sleep();
@@ -112,6 +117,7 @@ static int snapshot_release(struct inode *inode, struct file *filp)
 
 	swsusp_free();
 	data = filp->private_data;
+	data->bd_inode = NULL;
 	free_all_swap_pages(data->swap);
 	if (data->frozen) {
 		pm_restore_gfp_mask();
@@ -122,7 +128,7 @@ static int snapshot_release(struct inode *inode, struct file *filp)
 	}
 	pm_notifier_call_chain(data->mode == O_RDONLY ?
 			PM_POST_HIBERNATION : PM_POST_RESTORE);
-	atomic_inc(&snapshot_device_available);
+	hibernate_release();
 
 	unlock_system_sleep();
 
@@ -204,6 +210,7 @@ struct compat_resume_swap_area {
 static int snapshot_set_swap_area(struct snapshot_data *data,
 		void __user *argp)
 {
+	struct block_device *bdev;
 	sector_t offset;
 	dev_t swdev;
 
@@ -234,9 +241,12 @@ static int snapshot_set_swap_area(struct snapshot_data *data,
 		data->swap = -1;
 		return -EINVAL;
 	}
-	data->swap = swap_type_of(swdev, offset, NULL);
+	data->swap = swap_type_of(swdev, offset, &bdev);
 	if (data->swap < 0)
 		return -ENODEV;
+
+	data->bd_inode = bdev->bd_inode;
+	bdput(bdev);
 	return 0;
 }
 
diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c
index d3755ea70d4d..0ba61a2c4d81 100644
--- a/tools/power/cpupower/utils/cpupower-info.c
+++ b/tools/power/cpupower/utils/cpupower-info.c
@@ -62,7 +62,7 @@ int cmd_info(int argc, char **argv)
 		default:
 			print_wrong_arg_exit();
 		}
-	};
+	}
 
 	if (!params.params)
 		params.params = 0x7;
diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c
index 3cca6f715dd9..052044d7e012 100644
--- a/tools/power/cpupower/utils/cpupower-set.c
+++ b/tools/power/cpupower/utils/cpupower-set.c
@@ -72,7 +72,7 @@ int cmd_set(int argc, char **argv)
 		default:
 			print_wrong_arg_exit();
 		}
-	};
+	}
 
 	if (!params.params)
 		print_wrong_arg_exit();
diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
index 20f46348271b..5edd35bd9ee9 100644
--- a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c
@@ -117,7 +117,7 @@ static int amd_fam14h_get_pci_info(struct cstate *state,
 		break;
 	default:
 		return -1;
-	};
+	}
 	return 0;
 }
 
diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
index a65f7d011513..8b42c2f0a5b0 100644
--- a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
+++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c
@@ -53,7 +53,7 @@ static int cpuidle_start(void)
 			dprint("CPU %d - State: %d - Val: %llu\n",
 			       cpu, state, previous_count[cpu][state]);
 		}
-	};
+	}
 	return 0;
 }
 
@@ -72,7 +72,7 @@ static int cpuidle_stop(void)
 			dprint("CPU %d - State: %d - Val: %llu\n",
 			       cpu, state, previous_count[cpu][state]);
 		}
-	};
+	}
 	return 0;
 }
 
@@ -172,7 +172,7 @@ static struct cpuidle_monitor *cpuidle_register(void)
 		cpuidle_cstates[num].id = num;
 		cpuidle_cstates[num].get_count_percent =
 			cpuidle_get_count_percent;
-	};
+	}
 
 	/* Free this at program termination */
 	previous_count = malloc(sizeof(long long *) * cpu_count);
diff --git a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
index 97ad3233a521..55e55b6b42f9 100644
--- a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c
@@ -79,7 +79,7 @@ static int hsw_ext_get_count(enum intel_hsw_ext_id id, unsigned long long *val,
 		break;
 	default:
 		return -1;
-	};
+	}
 	if (read_msr(cpu, msr, val))
 		return -1;
 	return 0;
diff --git a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c
index 114271165182..16eaf006f61f 100644
--- a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c
@@ -91,7 +91,7 @@ static int nhm_get_count(enum intel_nhm_id id, unsigned long long *val,
 		break;
 	default:
 		return -1;
-	};
+	}
 	if (read_msr(cpu, msr, val))
 		return -1;
 
diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
index df8b223cc096..811d63ab17a7 100644
--- a/tools/power/cpupower/utils/idle_monitor/snb_idle.c
+++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c
@@ -77,7 +77,7 @@ static int snb_get_count(enum intel_snb_id id, unsigned long long *val,
 		break;
 	default:
 		return -1;
-	};
+	}
 	if (read_msr(cpu, msr, val))
 		return -1;
 	return 0;