Merge branch 'Add-5gbase-r-PHY-interface-mode'

Marek Behún says:

====================-
Add 5gbase-r PHY interface mode

there is still some testing needed for Amethyst patches, so I have
split the part adding support for 5gbase-r interface mode and am sending
it alone.

The first two patches are already reviewed.

Changes since last patches (Amethyst v16):
- added phylink 5gbase-r handler
- added SFP support for 5gbase-r mode
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 18 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index dac4aadb6e2e..f599c1d9c961 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -89,6 +89,7 @@ properties:
       - trgmii
       - 1000base-x
       - 2500base-x
+      - 5gbase-r
       - rxaui
       - xaui
 
diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst
index 70136cc9e25e..06adfc2afcf0 100644
--- a/Documentation/networking/phy.rst
+++ b/Documentation/networking/phy.rst
@@ -267,6 +267,12 @@ Some of the interface modes are described below:
     duplex, pause or other settings.  This is dependent on the MAC and/or
     PHY behaviour.
 
+``PHY_INTERFACE_MODE_5GBASER``
+    This is the IEEE 802.3 Clause 129 defined 5GBASE-R protocol. It is
+    identical to the 10GBASE-R protocol defined in Clause 49, with the
+    exception that it operates at half the frequency. Please refer to the
+    IEEE standard for the definition.
+
 ``PHY_INTERFACE_MODE_10GBASER``
     This is the IEEE 802.3 Clause 49 defined 10GBASE-R protocol used with
     various different mediums. Please refer to the IEEE standard for a
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 84f6e197f965..053c92e02cd8 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -306,6 +306,10 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			phylink_set(pl->supported, 2500baseX_Full);
 			break;
 
+		case PHY_INTERFACE_MODE_5GBASER:
+			phylink_set(pl->supported, 5000baseT_Full);
+			break;
+
 		case PHY_INTERFACE_MODE_USXGMII:
 		case PHY_INTERFACE_MODE_10GKR:
 		case PHY_INTERFACE_MODE_10GBASER:
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 3cfd773ae5f4..2e11176c6b94 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -400,6 +400,9 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
 	    phylink_test(link_modes, 10000baseT_Full))
 		return PHY_INTERFACE_MODE_10GBASER;
 
+	if (phylink_test(link_modes, 5000baseT_Full))
+		return PHY_INTERFACE_MODE_5GBASER;
+
 	if (phylink_test(link_modes, 2500baseX_Full))
 		return PHY_INTERFACE_MODE_2500BASEX;
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 5d7c4084ade9..0d537f59b77f 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -107,6 +107,7 @@ extern const int phy_10gbit_features_array[1];
  * @PHY_INTERFACE_MODE_100BASEX: 100 BaseX
  * @PHY_INTERFACE_MODE_1000BASEX: 1000 BaseX
  * @PHY_INTERFACE_MODE_2500BASEX: 2500 BaseX
+ * @PHY_INTERFACE_MODE_5GBASER: 5G BaseR
  * @PHY_INTERFACE_MODE_RXAUI: Reduced XAUI
  * @PHY_INTERFACE_MODE_XAUI: 10 Gigabit Attachment Unit Interface
  * @PHY_INTERFACE_MODE_10GBASER: 10G BaseR
@@ -139,6 +140,7 @@ typedef enum {
 	PHY_INTERFACE_MODE_100BASEX,
 	PHY_INTERFACE_MODE_1000BASEX,
 	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_5GBASER,
 	PHY_INTERFACE_MODE_RXAUI,
 	PHY_INTERFACE_MODE_XAUI,
 	/* 10GBASE-R, XFI, SFI - single lane 10G Serdes */
@@ -209,6 +211,8 @@ static inline const char *phy_modes(phy_interface_t interface)
 		return "1000base-x";
 	case PHY_INTERFACE_MODE_2500BASEX:
 		return "2500base-x";
+	case PHY_INTERFACE_MODE_5GBASER:
+		return "5gbase-r";
 	case PHY_INTERFACE_MODE_RXAUI:
 		return "rxaui";
 	case PHY_INTERFACE_MODE_XAUI: