diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-05-21 19:31:34 +0300 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-05-21 19:31:34 +0300 |
| commit | 011ff616ffe8df6b86ee54d14a43c8d1a96a6325 (patch) | |
| tree | 270100802ce38105d387c12ccabf283244a92119 | |
| parent | 5328bf8ba44e3f92016bbc800f352db922654f1b (diff) | |
| parent | a1149a6c06ee094a6e62886b0c0e8e66967a728a (diff) | |
| download | linux-011ff616ffe8df6b86ee54d14a43c8d1a96a6325.tar.xz | |
Merge tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- Fix SD-card detection on Intel NUC10i3FNK4 (GL9755)
- Replace WARN_ONCE with dev_warn_once for scatterlist offsets
- Extend check of scatterlist size alignment with SD_IO_RW_EXTENDED
* tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: increase 1.8V regulator wait
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
| -rw-r--r-- | drivers/mmc/host/meson-gx-mmc.c | 7 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-gli.c | 7 |
2 files changed, 11 insertions, 3 deletions
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index b8b771b643cc..016a6106151a 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -236,7 +236,8 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, if (host->dram_access_quirk) return; - if (data->blocks > 1) { + /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */ + if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) { /* * In block mode DMA descriptor format, "length" field indicates * number of blocks and there is no way to pass DMA size that @@ -258,7 +259,9 @@ static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, for_each_sg(data->sg, sg, data->sg_len, i) { /* check for 8 byte alignment */ if (sg->offset % 8) { - WARN_ONCE(1, "unaligned scatterlist buffer\n"); + dev_warn_once(mmc_dev(mmc), + "unaligned sg offset %u, disabling descriptor DMA for transfer\n", + sg->offset); return; } } diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c index 592d79082f58..061618aa247f 100644 --- a/drivers/mmc/host/sdhci-pci-gli.c +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -627,8 +627,13 @@ static void sdhci_gli_voltage_switch(struct sdhci_host *host) * * Wait 5ms after set 1.8V signal enable in Host Control 2 register * to ensure 1.8V signal enable bit is set by GL9750/GL9755. + * + * ...however, the controller in the NUC10i3FNK4 (a 9755) requires + * slightly longer than 5ms before the control register reports that + * 1.8V is ready, and far longer still before the card will actually + * work reliably. */ - usleep_range(5000, 5500); + usleep_range(100000, 110000); } static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) |