starfive-tech/linux.git/sound/soc, branch master

Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2021-04-30T19:48:14+00:00

Pull sound updates from Takashi Iwai: "No surprises in this development cycle, and most of work is about the fixes and the improvements of the existing code, while a new LED control layer and a few new drivers have been introduced. Here are some highlights: Core: - A common mute-LED framework was introduced. It is used by HD-audio for now, more adaption will follow later. The former "Mic Mute-LED Mode" mixer control has been replaced with the corresponding sysfs now. - User-control management was changed to count consumed bytes instead of capping by number of elements; this will allow more controls in the normal usage pattern while avoiding the possible memory exhaustion DoS ASoC: - Continued refactoring and cleanups in ASoC core and generic card drivers - Wide range of small cppcheck and warning fixes - New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358 accessory detection, and Realtek RT1019, RT1316, RT711 and RT715 USB-audio: - Continued improvements and fixes of the implicit feedback mode, including better support for Pioneer and Roland/BOSS devices HD-audio: - Default back to non-buffer preallocation on x86 - Cirrus codec improvements, more quirks for Realtek codecs Others: - New virtio sound driver - FireWire Bebob updates" * tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits) ALSA: hda/conexant: Re-order CX5066 quirk table entries ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices ALSA: hda/realtek: Re-order ALC662 quirk table entries ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries ALSA: hda/realtek: Re-order ALC269 HP quirk table entries ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries ALSA: usb-audio: Remove redundant assignment to len ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx ALSA: virtio: fix kernel-doc ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB ALSA: sb: Fix two use after free in snd_sb_qsound_build ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer ...

Merge tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2021-04-28T22:59:13+00:00

Pull MFD updates from Lee Jones: "Core Framework: - Add support for Software Nodes to MFD Core - Remove support for Device Properties from MFD Core - Use standard APIs in MFD Core New Drivers: - Add support for ROHM BD9576MUF and BD9573MUF PMICs - Add support for Netronix Embedded Controller, PWM and RTC - Add support for Actions Semi ATC260x PMICs and OnKey New Device Support: - Add support for DG1 PCIe Graphics Card to Intel PMT - Add support for ROHM BD71815 PMIC to ROHM BD71828 - Add support for Tolino Shine 2 HD to Netronix Embedded Controller - Add support for AX10 BMC Secure Updates to Intel M10 BMC Removed Device Support: - Remove Arizona Extcon support from MFD - Remove ST-E AB8500 Power Supply code from MFD - Remove AB3100 altogether New Functionality: - Add support for SMBus and I2C modes to Dialog DA9063 - Switch to using Software Nodes in Intel (various) New/converted Device Tree bindings: - rohm bd71815-pmic, rohm bd9576-pmic, netronix ntxec, actions atc260x, ricoh rn5t618, qcom pm8xxx - Fix-ups: - Fix error handling/path; intel_pmt - Simplify code; rohm-bd718x7, ab8500-core, intel-m10-bmc - Trivial clean-ups (reordering, spelling); rohm-generic, rn5t618, max8997 - Use correct data-type; db8500-prcmu - Remove superfluous code; lp87565, intel_quark_i2c_gpi, lpc_sch, twl - Use generic APIs/defines; lm3533-core, intel_quark_i2c_gpio - Regmap related fix-ups; intel-m10-bmc, sec-core - Reorder resource freeing during remove; intel_quark_i2c_gpio - Make table indexing more robust; intel_quark_i2c_gpio - Fix reference imbalances; arizona-irq - Staticify and (un)constify things; arizona-spi, stmpe, ene-kb3930, intel-lpss-acpi, intel-lpss-pci, atc260x-i2c, intel_quark_i2c_gpio Bug Fixes: - Fix incorrect (register) values; intel-m10-bmc - Kconfig related fixes; ABX500_CORE - Do not clear the Auto Reload Register; stm32-timers" * tag 'mfd-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (84 commits) mfd: intel-m10-bmc: Add support for MAX10 BMC Secure Updates Revert "mfd: max8997: Add of_compatible to Extcon and Charger mfd_cell" mfd: twl: Remove unused inline function twl4030charger_usb_en() dt-bindings: mfd: Convert pm8xxx bindings to yaml dt-bindings: mfd: Add compatible for pmk8350 rtc i2c: designware: Get rid of legacy platform data mfd: intel_quark_i2c_gpio: Convert I²C to use software nodes mfd: lpc_sch: Partially revert "Add support for Intel Quark X1000" mfd: arizona: Fix rumtime PM imbalance on error mfd: max8997: Replace 8998 with 8997 mfd: core: Use acpi_find_child_device() for child devices lookup mfd: intel_quark_i2c_gpio: Don't play dirty trick with const mfd: intel_quark_i2c_gpio: Enable MSI interrupt mfd: intel_quark_i2c_gpio: Reuse BAR definitions for MFD cell indexing mfd: ntxec: Support for EC in Tolino Shine 2 HD mfd: stm32-timers: Avoid clearing auto reload register mfd: intel_quark_i2c_gpio: Replace I²C speeds with descriptive definitions mfd: intel_quark_i2c_gpio: Remove unused struct device member mfd: intel_quark_i2c_gpio: Unregister resources in reversed order mfd: Kconfig: ABX500_CORE should depend on ARCH_U8500 ...

Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2021-04-26T18:20:10+00:00

Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.13-rc1. Actually busy this release, with a number of cleanups happening: - much needed core tty cleanups by Jiri Slaby - removal of unused and orphaned old-style serial drivers. If anyone shows up with this hardware, it is trivial to restore these but we really do not think they are in use anymore. - fixes and cleanups from Johan Hovold on a number of termios setting corner cases that loads of drivers got wrong as well as removing unneeded code due to tty core changes from long ago that were never propagated out to the drivers - loads of platform-specific serial port driver updates and fixes - coding style cleanups and other small fixes and updates all over the tty/serial tree. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) serial: extend compile-test coverage serial: stm32: add FIFO threshold configuration dt-bindings: serial: 8250: update TX FIFO trigger level dt-bindings: serial: stm32: override FIFO threshold properties dt-bindings: serial: add RX and TX FIFO properties serial: xilinx_uartps: drop low-latency workaround serial: vt8500: drop low-latency workaround serial: timbuart: drop low-latency workaround serial: sunsu: drop low-latency workaround serial: sifive: drop low-latency workaround serial: txx9: drop low-latency workaround serial: sa1100: drop low-latency workaround serial: rp2: drop low-latency workaround serial: rda: drop low-latency workaround serial: owl: drop low-latency workaround serial: msm_serial: drop low-latency workaround serial: mpc52xx_uart: drop low-latency workaround serial: meson: drop low-latency workaround serial: mcf: drop low-latency workaround serial: lpc32xx_hs: drop low-latency workaround ...

Merge remote-tracking branch 'asoc/for-5.13' into asoc-next

2021-04-23T18:01:02+00:00

ASoC: simple-card: Fix breakage on kontron-sl28-var3-ads2

2021-04-23T17:13:32+00:00

A KernelCI bisection identified 59c35c44a9cf89 "ASoC: simple-card: add simple_parse_node()" as causing simple-card to fail to instantiate on kontron-sl28-var3-ads2 systems. Since the merge window is expected to open over the weekend drop that commit and subsequent ones which depend on it for now in case other systems are affected too. The boot log showed the error as: <4>[ 9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi' (backtrace) <3>[ 10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory. The dropped commits are: 73371bacf0475a20ab6 "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()" 434392271afcff350fe "ASoC: simple-card: add simple_link_init()" 59c35c44a9cf89a83a9 "ASoC: simple-card: add simple_parse_node()" Reported-by: Guillaume Tucker Reported-by: "kernelci.org bot" Signed-off-by: Mark Brown

ASoC: rt711-sdca: add the notification when volume changed

2021-04-23T14:36:12+00:00

This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by: Shuming Fan Link: https://lore.kernel.org/r/20210422103235.22048-1-shumingf@realtek.com Signed-off-by: Mark Brown

ASoC: rt711-sdca: change capture switch controls

2021-04-23T14:36:11+00:00

The DAPM event and mixer control could mute/unmute the capture directly. That will be confused that capture still works if the user settings is unmute before the capture. Therefore, this patch uses the variables to record the capture switch status of DAPM and mixer. Signed-off-by: Shuming Fan Link: https://lore.kernel.org/r/20210422103220.21987-1-shumingf@realtek.com Signed-off-by: Mark Brown

ASoC: da7219: properly get clk from the provider

2021-04-23T12:16:27+00:00

Instead of using the clk embedded in the clk_hw (which is meant to go away), a clock provider which need to interact with its own clock should request clk reference through the clock provider API. Reviewed-by: Stephen Boyd Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20210421120512.413057-6-jbrunet@baylibre.com Signed-off-by: Mark Brown

ASoC: lpass: use the clock provider API

2021-04-23T12:16:26+00:00

Clock providers should be registered using the clk_hw API. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20210421120512.413057-5-jbrunet@baylibre.com Signed-off-by: Mark Brown

ASoC: rt5682: clock driver must use the clock provider API

2021-04-23T12:16:25+00:00

Clock drivers ops should not call the clk API but the clock provider (clk_hw) instead. Signed-off-by: Jerome Brunet Link: https://lore.kernel.org/r/20210421120512.413057-4-jbrunet@baylibre.com Signed-off-by: Mark Brown