starfive-tech/linux.git/include/linux, branch JH7110_VisionFive2_multi_rtos

driver: mipi : test tool

2024-12-06T06:02:51+00:00

update mipi driver support mipi test tool Signed-off-by: keith.zhao

virtio: Add a new event queue allocate function.

2024-05-31T09:29:07+00:00

Add a new event queue allocate function which will call a self-defined event queue init callback. new queue init callback function can set cache line align, which can reduce the snoop invalidate dcache line in IPI AMP communication. Signed-off-by: Minda Chen

workqueue: Enable flush_scheduled_work()

2024-03-05T07:18:31+00:00

Enable flush_scheduled_work() for JH7110 GPU. Signed-off-by: Hal Feng

regulator: starfive-jh7110: Add regulator support for JH7110 A type EVB.

2024-03-05T07:18:29+00:00

Add 7 regulators base on regulator framework for JH7110 evb HW design. Signed-off-by: Kevin.xie

uart: 8250: Add dw auto flow ctrl support

2024-03-05T07:18:28+00:00

Add designeware 8250 auto flow ctrl support. Enable it by add auto-flow-control in dts. Signed-off-by: Minda Chen

x86/numa: Fix the address overlap check in numa_fill_memblks()

2024-03-01T12:35:06+00:00

[ Upstream commit 9b99c17f7510bed2adbe17751fb8abddba5620bc ] numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a physical address range. To do so, it first creates a list of existing memblks that overlap that address range. The issue is that it is off by one when comparing to the end of the address range, so memblks that do not overlap are selected. The impact of selecting a memblk that does not actually overlap is that an existing memblk may be filled when the expected action is to do nothing and return NUMA_NO_MEMBLK to the caller. The caller can then add a new NUMA node and memblk. Replace the broken open-coded search for address overlap with the memblock helper memblock_addrs_overlap(). Update the kernel doc and in code comments. Suggested by: "Huang, Ying" Fixes: 8f012db27c95 ("x86/numa: Introduce numa_fill_memblks()") Signed-off-by: Alison Schofield Acked-by: Mike Rapoport (IBM) Acked-by: Dave Hansen Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com Signed-off-by: Dan Williams Signed-off-by: Sasha Levin

IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported

2024-03-01T12:35:04+00:00

[ Upstream commit 43fdbd140238d44e7e847232719fef7d20f9d326 ] debugfs entries for RRoCE general CC parameters must be exposed only when they are supported, otherwise when accessing them there may be a syndrome error in kernel log, for example: $ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument $ dmesg mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22) Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters") Reviewed-by: Edward Srouji Signed-off-by: Mark Zhang Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin

mm/swap: fix race when skipping swapcache

2024-03-01T12:35:00+00:00

commit 13ddaf26be324a7f951891ecd9ccd04466d27458 upstream. When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry swap_read_folio() <- read to page A swap_read_folio() <- read to page B ... set_pte_at() swap_free() <- entry is free pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: "Huang, Ying" Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/ Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1] Signed-off-by: Kairui Song Reviewed-by: "Huang, Ying" Acked-by: Yu Zhao Acked-by: David Hildenbrand Acked-by: Chris Li Cc: Hugh Dickins Cc: Johannes Weiner Cc: Matthew Wilcox (Oracle) Cc: Michal Hocko Cc: Minchan Kim Cc: Yosry Ahmed Cc: Yu Zhao Cc: Barry Song <21cnbao@gmail.com> Cc: SeongJae Park Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio

2024-03-01T12:34:59+00:00

commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream. If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe Cc: Christoph Hellwig Cc: Avi Kivity Cc: Sandeep Dhavale Cc: Jens Axboe Cc: Greg Kroah-Hartman Cc: Kent Overstreet Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner Signed-off-by: Greg Kroah-Hartman

libceph: fail sparse-read if the data length doesn't match

2024-03-01T12:34:56+00:00

[ Upstream commit cd7d469c25704d414d71bf3644f163fb74e7996b ] Once this happens that means there have bugs. Signed-off-by: Xiubo Li Reviewed-by: Jeff Layton Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin