starfive-tech/linux.git/include/linux/nvme.h, branch VF2_v2.8.0

nvme.h: add missing nvme_lba_range_type endianness annotations

2021-06-17T13:51:21+00:00

Signed-off-by: Wesley Sheng Signed-off-by: Christoph Hellwig

nvmet: add ZBD over ZNS backend support

2021-06-17T13:51:21+00:00

NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to communicate with a non-volatile memory subsystem using zones for NVMe protocol-based controllers. NVMeOF already support the ZNS NVMe Protocol compliant devices on the target in the passthru mode. There are generic zoned block devices like Shingled Magnetic Recording (SMR) HDDs that are not based on the NVMe protocol. This patch adds ZNS backend support for non-ZNS zoned block devices as NVMeOF targets. This support includes implementing the new command set NVME_CSI_ZNS, adding different command handlers for ZNS command set such as NVMe Identify Controller, NVMe Identify Namespace, NVMe Zone Append, NVMe Zone Management Send and NVMe Zone Management Receive. With the new command set identifier, we also update the target command effects logs to reflect the ZNS compliant commands. Signed-off-by: Chaitanya Kulkarni Reviewed-by: Damien Le Moal Signed-off-by: Christoph Hellwig

nvmet: add Command Set Identifier support

2021-06-17T13:51:20+00:00

NVMe TP 4056 allows controllers to support different command sets. NVMeoF target currently only supports namespaces that contain traditional logical blocks that may be randomly read and written. In some applications there is a value in exposing namespaces that contain logical blocks that have special access rules (e.g. sequentially write required namespace such as Zoned Namespace (ZNS)). In order to support the Zoned Block Devices (ZBD) backend, controllers need to have support for ZNS Command Set Identifier (CSI). In this preparation patch, we adjust the code such that it can now support the default command set identifier. We update the namespace data structure to store the CSI value which defaults to NVME_CSI_NVM that represents traditional logical blocks namespace type. The CSI support is required to implement the ZBD backend for NVMeOF with host side NVMe ZNS interface, since ZNS commands belong to the different command set than the default one. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Christoph Hellwig

nvme: implement non-mdts command limits

2021-04-06T06:34:39+00:00

Commands that access LBA contents without a data transfer between the host historically have not had a spec defined upper limit. The driver set the queue constraints for such commands to the max data transfer size just to be safe, but this artificial constraint frequently limits devices below their capabilities. The NVMe Workgroup ratified TP4040 defines how a controller may advertise their non-MDTS limits. Use these if provided and default to the current constraints if not. Since the Dataset Management command limits are defined in logical blocks, but without a namespace to tell us the logical block size, the code defaults to the safe 512b size. Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig

nvme: add tracing of zns commands

2021-02-02T09:26:12+00:00

When support for the NVMe ZNS commands was merged, tracing of these has been omitted. Add nvme_cmd_zone_mgmt_send, nvme_cmd_zone_mgmt_recv as well as nvme_cmd_zone_append to the nvme driver's tracing facility. Signed-off-by: Johannes Thumshirn Signed-off-by: Christoph Hellwig

nvme: update enumerations for status codes

2021-02-02T09:26:12+00:00

All the updates are mentioned in the ratified NVMe 1.4 spec. Reviewed-by: Hannes Reinecke Signed-off-by: Max Gurtovoy Signed-off-by: Christoph Hellwig

nvme-pci: allow use of cmb on v1.4 controllers

2021-01-18T17:58:18+00:00

Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled by the host. Signed-off-by: Klaus Jensen [hch: avoid a local variable and add a comment] Signed-off-by: Christoph Hellwig

nvmet: add passthru code to process commands

2020-07-29T05:45:21+00:00

Add passthru command handling capability for the NVMeOF target and export passthru APIs which are used to integrate passthru code with nvmet-core. The new file passthru.c handles passthru cmd parsing and execution. In the passthru mode, we create a block layer request from the nvmet request and map the data on to the block layer request. Admin commands and features are on an allow list as there are a number of each that don't make too much sense with passthrough. We use an allow list such that new commands can be considered before being blindly passed through. In both cases, vendor specific commands are always allowed. We also reject reservation IO commands as the underlying device cannot differentiate between multiple hosts behind a fabric. Based-on-a-patch-by: Chaitanya Kulkarni Signed-off-by: Logan Gunthorpe Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Signed-off-by: Christoph Hellwig

nvme: support for zoned namespaces

2020-07-08T14:16:20+00:00

Add support for NVM Express Zoned Namespaces (ZNS) Command Set defined in NVM Express TP4053. Zoned namespaces are discovered based on their Command Set Identifier reported in the namespaces Namespace Identification Descriptor list. A successfully discovered Zoned Namespace will be registered with the block layer as a host managed zoned block device with Zone Append command support. A namespace that does not support append is not supported by the driver. Reviewed-by: Martin K. Petersen Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Reviewed-by: Sagi Grimberg Reviewed-by: Javier González Reviewed-by: Himanshu Madhani Signed-off-by: Hans Holmberg Signed-off-by: Dmitry Fomichev Signed-off-by: Ajay Joshi Signed-off-by: Aravind Ramesh Signed-off-by: Niklas Cassel Signed-off-by: Matias Bjørling Signed-off-by: Damien Le Moal Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig

nvme: support for multiple Command Sets Supported and Effects log pages

2020-07-08T14:16:20+00:00

The Commands Supported and Effects log page was extended with a CSI field that enables the host to query the log page for each command set supported. Retrieve this log page for each command set that an attached namespace supports, and save a pointer to that log in the namespace head. Reviewed-by: Matias Bjørling Reviewed-by: Javier González Reviewed-by: Himanshu Madhani Reviewed-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Reviewed-by: Daniel Wagner Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig