starfive-tech/linux.git/drivers/watchdog/Kconfig, branch visionfive

watchdog: Add driver for Intel OC WDT

2025-06-01T11:16:33+00:00

Add a driver for the Intel Over-Clocking Watchdog found in Intel Platform Controller (PCH) chipsets. This watchdog is controlled via a simple single-register interface and would otherwise be standard except for the presence of a LOCK bit that can only be set once per power cycle, needing extra handling around it. Signed-off-by: Diogo Ivo Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250317-ivo-intel_oc_wdt-v3-1-32c396f4eefd@siemens.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Add the Watchdog Timer for the NXP S32 platform

2025-05-24T14:57:54+00:00

The S32 platform has several Watchdog Timer available and tied with a CPU. The SWT0 is the only one which directly asserts the reset line, other SWT require an external setup to configure the reset behavior which is not part of this change. As a side note, in the NXP documentation, the s32g2 and s32g3 reference manuals refer the watchdog as the 'Software Timer Watchdog' where the name can be misleading as it is actually a hardware watchdog. The maximum watchdog timeout value depends on the clock feeding the SWT counter which is 32bits wide. On the s32g274-rb2, the clock has a rate of 51MHz which result on 83 seconds maximum timeout. The timeout can be specified via the device tree with the usual existing bindings 'timeout-sec' or via the module param timeout. The watchdog can be loaded with the 'nowayout' option, preventing the watchdog to be stopped. The watchdog can be started at boot time with the 'early-enable' option, thus letting the watchdog framework to service the watchdog counter. The watchdog support the magic character to stop when the userspace releases the device. Cc: Ghennadi Procopciuc Cc: Thomas Fossati Signed-off-by: Daniel Lezcano Tested-by: Alexandru-Catalin Ionita Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250410082616.1855860-3-daniel.lezcano@linaro.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Do not enable by default during compile testing

2025-05-24T14:57:53+00:00

Enabling the compile test should not cause automatic enabling of all drivers. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250404123941.362620-1-krzysztof.kozlowski@linaro.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: nic7018_wdt: tidy up ACPI ID table

2025-03-09T14:19:44+00:00

Tidy up ACPI ID table: - drop ACPI_PTR() and hence replace acpi.h with mod_devicetable.h - remove explicit driver_data initializer - drop comma in the terminator entry With that done, extend compile test coverage. Signed-off-by: Andy Shevchenko Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250304140114.1812452-1-andriy.shevchenko@linux.intel.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: lenovo_se30_wdt: Watchdog driver for Lenovo SE30 platform

2025-03-09T14:19:43+00:00

Watchdog driver implementation for Lenovo SE30 platform. Signed-off-by: Mark Pearson Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250131204855.1827-1-mpearson-lenovo@squebb.ca Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Enable RZV2HWDT driver depend on ARCH_RENESAS

2025-03-09T14:19:42+00:00

RZ/G3E watchdog timer IP is similar to the one found on RZ/V2H. Both these SoCs belong to the ARCH_RENESAS family. So, it makes sense to use ARCH_RENESAS rather than ARCH_R9A09G057 to enable the RZV2HWDT driver. Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20250126132633.31956-3-biju.das.jz@bp.renesas.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

Merge tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog

2024-12-05T18:03:43+00:00

Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ...

Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2024-11-20T23:13:02+00:00

Pull asm-generic updates from Arnd Bergmann: "These are a number of unrelated cleanups, generally simplifying the architecture specific header files: - A series from Al Viro simplifies asm/vga.h, after it turns out that most of it can be generalized. - A series from Julian Vetter adds a common version of memcpy_{to,from}io() and memset_io() and changes most architectures to use that instead of their own implementation - A series from Niklas Schnelle concludes his work to make PC style inb()/outb() optional - Nicolas Pitre contributes improvements for the generic do_div() helper - Christoph Hellwig adds a generic version of page_to_phys() and phys_to_page(), replacing the slightly different architecture specific definitions. - Uwe Kleine-Koenig has a minor cleanup for ioctl definitions" * tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits) empty include/asm-generic/vga.h sparc: get rid of asm/vga.h asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to vt_buffer.h: get rid of dead code in default scr_...() instances tty: serial: export serial_8250_warn_need_ioport lib/iomem_copy: fix kerneldoc format style hexagon: simplify asm/io.h for !HAS_IOPORT loongarch: Use new fallback IO memcpy/memset csky: Use new fallback IO memcpy/memset arm64: Use new fallback IO memcpy/memset New implementation for IO memcpy and IO memset watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240 __arch_xprod64(): make __always_inline when optimizing for performance ARM: div64: improve __arch_xprod_64() asm-generic/div64: optimize/simplify __div64_const32() lib/math/test_div64: add some edge cases relevant to __div64_const32() asm-generic: add an optional pfn_valid check to page_to_phys asm-generic: provide generic page_to_phys and phys_to_page implementations asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n tty: serial: handle HAS_IOPORT dependencies ...

Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs"

2024-11-07T10:21:21+00:00

This reverts commit 746f0770f916e6c48e422d6a34e67eae16707f0e. Now that we can register a SoC specific regmap with syscon using of_syscon_register_regmap() api we can switch back to using syscon_regmap_lookup_by_phandle() in the client drivers. Signed-off-by: Peter Griffin Reviewed-by: Sam Protsenko Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20241029191131.2329414-1-peter.griffin@linaro.org Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck

watchdog: Delete the cpu5wdt driver

2024-11-05T09:04:39+00:00

This driver has a number of issues (accesses arbitrary I/O ports without identifying the hardware, doesn't document what hardware it supports, suspiciously inconsistent locking model, doesn't implement WDIOC_SETTIMEOUT, potential integer overflow...) The driver was added in 2003 and there's no evidence that it has any recent user, all changes seem to be tree-wide, subsystem-wide, or the result of static code analysis. So I believe we should simply drop this legacy piece of code. Signed-off-by: Jean Delvare Message-ID: <20241011170710.484a257a@endymion.delvare> Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20241022114731.31f69c94@endymion.delvare Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck