starfive-tech/linux.git/drivers/pci/controller/dwc/Makefile, branch visionfive

PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode

2025-07-24T21:29:46+00:00

Add driver support for DesignWare based PCIe controller in SG2044 SoC. The driver currently supports the Root Complex mode. Signed-off-by: Inochi Amaoto [mani: renamed the driver to 'pcie-sophgo.c' and Kconfig fix] Signed-off-by: Manivannan Sadhasivam [bhelgaas: whitespace] Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20250504004420.202685-3-inochiama@gmail.com

Merge branch 'pci/controller/dwc'

2025-03-27T18:14:49+00:00

- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam) - Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended Capabilities (Shradha Todi) - Add debugfs-based Silicon Debug, Error Injection, Statistical Counter support for DWC (Shradha Todi) - Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang) - Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so the DWC debugfs features work for Rockchip as well (Niklas Cassel) * pci/controller/dwc: PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability() PCI: dwc: ep: Return -ENOMEM for allocation failures PCI: dwc: Add Rockchip to the RAS DES allowed vendor list PCI: Add Rockchip Vendor ID PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link PCI: dwc: Add debugfs based Statistical Counter support for DWC PCI: dwc: Add debugfs based Error Injection support for DWC PCI: dwc: Add debugfs based Silicon Debug support for DWC PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC) perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'

PCI: amd-mdb: Add AMD MDB Root Port driver

2025-03-23T05:50:59+00:00

Add support for AMD MDB (Multimedia DMA Bridge) IP core as Root Port. The Versal2 devices include MDB Module. The integrated block for MDB along with the integrated bridge can function as PCIe Root Port controller at Gen5 32-GT/s operation per lane. Bridge supports error and INTx interrupts and are handled using platform specific interrupt line in Versal2. Signed-off-by: Thippeswamy Havalige Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20250228093351.923615-4-thippeswamy.havalige@amd.com [bhelgaas: only present on ARM64-based SoCs; squash Kconfig dependency on ARM64 from Geert Uytterhoeven : https://lore.kernel.org/r/eaef1dea7edcf146aa377d5e5c5c85a76ff56bae.1742306383.git.geert+renesas@glider.be] Signed-off-by: Bjorn Helgaas [kwilczynski: commit log, code comments and error messages clean-up, drop redundant "depends on PCI" from Kconfig, expose the error code as part of error messages where appropriatie, change "depends on" expression to match existing style from other drivers] Signed-off-by: Krzysztof Wilczyński

PCI: dwc: Add debugfs based Silicon Debug support for DWC

2025-03-06T08:55:47+00:00

Add support to provide Silicon Debug interface to userspace. This set of debug registers are part of the RAS DES feature present in DesignWare PCIe controllers. Co-developed-by: Manivannan Sadhasivam Signed-off-by: Shradha Todi Reviewed-by: Manivannan Sadhasivam Reviewed-by: Fan Ni Tested-by: Hrishikesh Deleep Link: https://lore.kernel.org/r/20250221131548.59616-4-shradha.t@samsung.com [kwilczynski: commit log, tidy up Kconfig and drop "default y", tidy up code comments, squashed patch that fixes a NULL pointer dereference when debugfs is already unavailable during clean-up from https://lore.kernel.org/linux-pci/20250225171239.19574-2-manivannan.sadhasivam@linaro.org, refactor dwc_pcie_debugfs_init() to not return errors, squashed patch that changes how lack of the RAS DES capability is handled from https://lore.kernel.org/linux-pci/20250304151814.6xu7cbpwpqrvcad5@thinkpad] Signed-off-by: Krzysztof Wilczyński

PCI: qcom: Add equalization settings for 16.0 GT/s

2024-09-13T14:44:57+00:00

During high data transmission rates such as 16.0 GT/s, there is an increased risk of signal loss due to poor channel quality and interference. This can impact receiver's ability to capture signals accurately. Hence, as signal compensation is achieved through appropriate lane equalization, apply lane equalization settings at both transmitter and receiver which results in an increase in the PCIe signal strength. While at it, modify the pcie-tegra194 driver to make use of the common GEN3_EQ_CONTROL_OFF definitions in pcie-designware.h. Link: https://lore.kernel.org/linux-pci/20240911-pci-qcom-gen4-stability-v7-3-743f5c1fd027@linaro.org Tested-by: Johan Hovold Signed-off-by: Shashank Babu Chinta Venkata [mani: dropped the code refactoring and minor changes] Signed-off-by: Manivannan Sadhasivam [kwilczynski: commit log] Signed-off-by: Krzysztof Wilczyński Reviewed-by: Johan Hovold Reviewed-by: Manivannan Sadhasivam

PCI: dw-rockchip: Add endpoint mode support

2024-07-09T23:29:36+00:00

The PCIe controller in rk3568 and rk3588 can operate in endpoint mode. This endpoint mode support heavily leverages the existing code in pcie-designware-ep.c. Add support for endpoint mode to the existing pcie-dw-rockchip glue driver. [kwilczynski: squash with patch adding the PCI_ENDPOINT dependency] Link: https://lore.kernel.org/linux-pci/20240607-rockchip-pcie-ep-v1-v5-10-0a042d6b0049@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Krzysztof Wilczyński Signed-off-by: Bjorn Helgaas Reviewed-by: Manivannan Sadhasivam

PCI: rcar-gen4: Add R-Car Gen4 PCIe controller support for host mode

2023-10-23T12:40:10+00:00

Add R-Car Gen4 PCIe controller support for host mode. This controller is based on Synopsys DesignWare PCIe. However, this particular controller has a number of vendor-specific registers, and as such, requires initialization code like mode setting and retraining and so on. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-13-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda Signed-off-by: Krzysztof Wilczyński Reviewed-by: Manivannan Sadhasivam Reviewed-by: Serge Semin

PCI: dwc: Add Baikal-T1 PCIe controller support

2022-11-23T15:01:55+00:00

Baikal-T1 SoC is equipped with DWC PCIe v4.60a host controller. It can be trained to work up to Gen.3 speed over up to x4 lanes. The host controller is attached to the DW PCIe 3.0 PCS via the PIPE-4 interface, which in its turn is connected to the DWC 10G PHY. The whole system is supposed to be fed up with four clock sources: DBI peripheral clock, AXI application clocks and external PHY/core reference clock generating the 100MHz signal. In addition to that the platform provide a way to reset each part of the controller: sticky/non-sticky bits, host controller core, PIPE interface, PCS/PHY and Hot/Power reset signal. The driver also provides a way to handle the GPIO-based PERST# signal. Note due to the Baikal-T1 MMIO peculiarity we have to implement the DBI interface accessors which make sure the IO operations are dword-aligned. Link: https://lore.kernel.org/r/20221113191301.5526-21-Sergey.Semin@baikalelectronics.ru Signed-off-by: Serge Semin Signed-off-by: Lorenzo Pieralisi

PCI: qcom-ep: Add Qualcomm PCIe Endpoint controller driver

2021-10-11T20:34:02+00:00

Add driver for Qualcomm PCIe Endpoint controller based on the DesignWare core with added Qualcomm-specific wrapper around the core. The driver support is very basic such that it supports only enumeration, PCIe read/write, and MSI. There is no ASPM and PM support for now but these will be added later. The driver is capable of using the PERST# and WAKE# side-band GPIOs for operation and written on top of the DWC PCI framework. [bhelgaas: wrap a few long lines] Co-developed-by: Siddartha Mohanadoss [mani: restructured the driver and fixed several bugs for upstream] Link: https://lore.kernel.org/r/20210920065946.15090-3-manivannan.sadhasivam@linaro.org Signed-off-by: Siddartha Mohanadoss Signed-off-by: Manivannan Sadhasivam Signed-off-by: Lorenzo Pieralisi Signed-off-by: Bjorn Helgaas Reviewed-by: Rob Herring

Merge branch 'remotes/lorenzo/pci/keembay'

2021-09-02T19:56:48+00:00

- Add Intel Keem Bay PCIe controller driver and DT binding (Srikanth Thokala) * remotes/lorenzo/pci/keembay: PCI: keembay: Add support for Intel Keem Bay dt-bindings: PCI: Add Intel Keem Bay PCIe controller