starfive-tech/linux.git/drivers/net/ethernet/broadcom/bnxt, branch visionfive

bnxt_en: correct offset handling for IPv6 destination address

2025-09-23T00:56:39+00:00

In bnxt_tc_parse_pedit(), the code incorrectly writes IPv6 destination values to the source address field (saddr) when processing pedit offsets within the destination address range. This patch corrects the assignment to use daddr instead of saddr, ensuring that pedit operations on IPv6 destination addresses are applied correctly. Fixes: 9b9eb518e338 ("bnxt_en: Add support for NAT(L3/L4 rewrite)") Signed-off-by: Alok Tiwari Reviewed-by: Somnath Kotur Link: https://patch.msgid.link/20250920121157.351921-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski

bnxt_en: fix incorrect page count in RX aggr ring log

2025-09-01T19:51:05+00:00

The warning in bnxt_alloc_one_rx_ring_netmem() reports the number of pages allocated for the RX aggregation ring. However, it mistakenly used bp->rx_ring_size instead of bp->rx_agg_ring_size, leading to confusing or misleading log output. Use the correct bp->rx_agg_ring_size value to fix this. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Alok Tiwari Reviewed-by: Jacob Keller Reviewed-by: Michael Chan Reviewed-by: Somnath Kotur Link: https://patch.msgid.link/20250830062331.783783-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski

bnxt_en: Fix stats context reservation logic

2025-08-27T00:48:35+00:00

The HW resource reservation logic allows the L2 driver to use the RoCE resources if the RoCE driver is not registered. When calculating the stats contexts available for L2, we should not blindly subtract the stats contexts reserved for RoCE unless the RoCE driver is registered. This bug may cause the L2 rings to be less than the number requested when we are close to running out of stats contexts. Fixes: 2e4592dc9bee ("bnxt_en: Change MSIX/NQs allocation policy") Reviewed-by: Kalesh AP Reviewed-by: Somnath Kotur Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250825175927.459987-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt_en: Adjust TX rings if reservation is less than requested

2025-08-27T00:48:35+00:00

Before we accept an ethtool request to increase a resource (such as rings), we call the FW to check that the requested resource is likely available first before we commit. But it is still possible that the actual reservation or allocation can fail. The existing code is missing the logic to adjust the TX rings in case the reserved TX rings are less than requested. Add a warning message (a similar message for RX rings already exists) and add the logic to adjust the TX rings. Without this fix, the number of TX rings reported to the stack can exceed the actual TX rings and ethtool -l will report more than the actual TX rings. Fixes: 674f50a5b026 ("bnxt_en: Implement new method to reserve rings.") Reviewed-by: Kalesh AP Reviewed-by: Somnath Kotur Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250825175927.459987-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt_en: Fix memory corruption when FW resources change during ifdown

2025-08-27T00:48:35+00:00

bnxt_set_dflt_rings() assumes that it is always called before any TC has been created. So it doesn't take bp->num_tc into account and assumes that it is always 0 or 1. In the FW resource or capability change scenario, the FW will return flags in bnxt_hwrm_if_change() that will cause the driver to reinitialize and call bnxt_cancel_reservations(). This will lead to bnxt_init_dflt_ring_mode() calling bnxt_set_dflt_rings() and bp->num_tc may be greater than 1. This will cause bp->tx_ring[] to be sized too small and cause memory corruption in bnxt_alloc_cp_rings(). Fix it by properly scaling the TX rings by bp->num_tc in the code paths mentioned above. Add 2 helper functions to determine bp->tx_nr_rings and bp->tx_nr_rings_per_tc. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Reviewed-by: Kalesh AP Reviewed-by: Andy Gospodarek Signed-off-by: Sreekanth Reddy Signed-off-by: Michael Chan Link: https://patch.msgid.link/20250825175927.459987-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt_en: Fix lockdep warning during rmmod

2025-08-19T00:51:22+00:00

The commit under the Fixes tag added a netdev_assert_locked() in bnxt_free_ntp_fltrs(). The lock should be held during normal run-time but the assert will be triggered (see below) during bnxt_remove_one() which should not need the lock. The netdev is already unregistered by then. Fix it by calling netdev_assert_locked_or_invisible() which will not assert if the netdev is unregistered. WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re] CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S W 6.16.0 #2 PREEMPT(voluntary) Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en] Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa92082387da0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001 RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3 R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001 R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100 FS: 00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0 Call Trace: bnxt_remove_one+0x57/0x180 [bnxt_en] pci_device_remove+0x39/0xc0 device_release_driver_internal+0xa5/0x130 driver_detach+0x42/0x90 bus_remove_driver+0x61/0xc0 pci_unregister_driver+0x38/0x90 bnxt_exit+0xc/0x7d0 [bnxt_en] Fixes: 004b5008016a ("eth: bnxt: remove most dependencies on RTNL") Reviewed-by: Pavan Chebbi Signed-off-by: Michael Chan Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski

bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE

2025-08-14T00:27:23+00:00

The data page pool always fills the HW rx ring with pages. On arm64 with 64K pages, this will waste _at least_ 32K of memory per entry in the rx ring. Fix by fragmenting the pages if PAGE_SIZE > BNXT_RX_PAGE_SIZE. This makes the data page pool the same as the header pool. Tested with iperf3 with a small (64 entries) rx ring to encourage buffer circulation. Fixes: cd1fafe7da1f ("eth: bnxt: add support rx side device memory TCP") Reviewed-by: Michael Chan Signed-off-by: David Wei Link: https://patch.msgid.link/20250812182907.1540755-1-dw@davidwei.uk Signed-off-by: Jakub Kicinski

net: page_pool: allow enabling recycling late, fix false positive warning

2025-08-08T19:54:42+00:00

Page pool can have pages "directly" (locklessly) recycled to it, if the NAPI that owns the page pool is scheduled to run on the same CPU. To make this safe we check that the NAPI is disabled while we destroy the page pool. In most cases NAPI and page pool lifetimes are tied together so this happens naturally. The queue API expects the following order of calls: -> mem_alloc alloc new pp -> stop napi_disable -> start napi_enable -> mem_free free old pp Here we allocate the page pool in ->mem_alloc and free in ->mem_free. But the NAPIs are only stopped between ->stop and ->start. We created page_pool_disable_direct_recycling() to safely shut down the recycling in ->stop. This way the page_pool_destroy() call in ->mem_free doesn't have to worry about recycling any more. Unfortunately, the page_pool_disable_direct_recycling() is not enough to deal with failures which necessitate freeing the _new_ page pool. If we hit a failure in ->mem_alloc or ->stop the new page pool has to be freed while the NAPI is active (assuming driver attaches the page pool to an existing NAPI instance and doesn't reallocate NAPIs). Freeing the new page pool is technically safe because it hasn't been used for any packets, yet, so there can be no recycling. But the check in napi_assert_will_not_race() has no way of knowing that. We could check if page pool is empty but that'd make the check much less likely to trigger during development. Add page_pool_enable_direct_recycling(), pairing with page_pool_disable_direct_recycling(). It will allow us to create the new page pools in "disabled" state and only enable recycling when we know the reconfig operation will not fail. Coincidentally it will also let us re-enable the recycling for the old pool, if the reconfig failed: -> mem_alloc (new) -> stop (old) # disables direct recycling for old -> start (new) # fail!! -> start (old) # go back to old pp but direct recycling is lost :( -> mem_free (new) The new helper is idempotent to make the life easier for drivers, which can operate in HDS mode and support zero-copy Rx. The driver can call the helper twice whether there are two pools or it has multiple references to a single pool. Fixes: 40eca00ae605 ("bnxt_en: unlink page pool when stopping Rx queue") Tested-by: David Wei Link: https://patch.msgid.link/20250805003654.2944974-1-kuba@kernel.org Signed-off-by: Jakub Kicinski

Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2025-07-30T15:58:55+00:00

Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ...

Merge tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2025-07-29T21:02:53+00:00

Pull timer cleanups from Thomas Gleixner: "A treewide cleanup of struct cycle_counter const annotations. The initial idea of making them const was correct as they were seperate instances. When they got embedded into larger data structures, which are even modified by the callback this got moot. The only reason why this went unnoticed is that the required container_of() casts the const attribute forcefully away. Stop pretending that it is const" * tag 'timers-cleanups-2025-07-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: time/timecounter: Fix the lie that struct cyclecounter is const