StarFive Tech Linux Kernel for VisionFive (JH7110) boards (mirror) https://git.radix-linux.su/starfive-tech/linux.git/atom?h=visionfive 2025-07-24T07:20:39+00:00 2025-07-24T07:20:39+00:00 Dimitri Fedrau dimitri.fedrau@liebherr.com 2025-07-23T17:34:57+00:00 urn:sha1:a02b105fe9f2b82cbd13b13a98c2b9ffae4a7c27 The device is able to monitor temperature, voltage and current of each of the four outputs. Add basic support for monitoring the temperature of the four outputs and the die temperature. Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20250723-mc33xs2410-hwmon-v5-2-f62aab71cd59@liebherr.com Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org> 2025-06-03T16:11:26+00:00 Linus Torvalds torvalds@linux-foundation.org 2025-06-03T16:11:26+00:00 urn:sha1:76c21d225469780a005140037b6248e648f41ae4 Pull hwmon updates from Guenter Roeck: "New drivers: - KEBA fan controller - KEBA battery monitoring controller - MAX77705 Support added to existing drivers: - MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors) - SQ52206 support (ina238) - lt3074 support (pmbus/lt3074) - ADPM12160 support (pmbus/max34440) - MPM82504 and for MPM3695 family support (pmbus/mpq8785) - Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm) - Zen5 Ryzen Desktop support (k10temp) Various other minor fixes and improvements" * tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits) doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature. hwmon: (isl28022) Fix current reading calculation hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data hwmon: Add KEBA fan controller support hwmon: pmbus: mpq8785: Add support for MPM3695 family hwmon: pmbus: mpq8785: Add support for MPM82504 hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration hwmon: pmbus: mpq8785: Prepare driver for multiple device support dt-bindings: hwmon: Add bindings for mpq8785 driver hwmon: (ina238) Modify the calculation formula to adapt to different chips hwmon: (ina238) Add support for SQ52206 dt-bindings: Add SQ52206 to ina2xx devicetree bindings hwmon: (ina238) Add ina238_config to save configurations for different chips hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO. hwmon: (isl28022, nct7363) Convert to use maple tree register cache hwmon: (asus-ec-sensors) check sensor index in read_string() hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula. dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support hwmon: (max77705) Add initial support hwmon: (tmp102) add vcc regulator support ... 2025-05-13T01:05:54+00:00 Gerhard Engleder eg@keba.com 2025-04-25T19:48:23+00:00 urn:sha1:9b96f82c782c9d3f614c7d34e13382d91bb4854c The KEBA fan controller is found in the system FPGA of KEBA PLC devices. It detects if the fan is removed or blocked. For fans with tacho signal the monitoring of the speed of the fan is supported. It also supports to regulate the speed of fans with PWM input. The auxiliary device for this driver is instantiated by the cp500 misc driver. Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/r/20250425194823.54664-1-gerhard@engleder-embedded.com [groeck: Added various missing "break;" statements] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2025-04-30T11:04:56+00:00 Antheas Kapenekakis lkml@antheas.dev 2025-04-25T11:18:08+00:00 urn:sha1:3012bb39001c4cab0b8587b0421ae64b8ca54655 The EC of OneXPlayer devices used to only control the fan. This is no longer the case, with the EC of OneXPlayer gaining additional functionality (turbo button, turbo led, battery controls). As it will be beneficial from a complexity perspective to retain this driver as a single unit, move it out of hwmon, and into platform/x86. Also, remove the hwmon documentation to prepare moving it to Documentation/ABI/. While at it, add myself to the maintainer's file. Acked-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Link: https://lore.kernel.org/r/20250425111821.88746-4-lkml@antheas.dev Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 2025-04-23T14:21:15+00:00 Dzmitry Sankouski dsankouski@gmail.com 2025-04-23T04:54:36+00:00 urn:sha1:8debd8511dd9376fab33bff62500a5a71937420a Maxim MAX77705 is a Companion Power Management and Type-C interface IC. It includes charger and fuel gauge blocks, and is capable of measuring charger input current, system bus volatage and current, and bypass voltage. Add support for mentioned measurements. Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Link: https://lore.kernel.org/r/20250423-initial-support-for-max77705-sensors-v6-1-ff379e1b06c5@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2025-04-23T14:18:27+00:00 Gerhard Engleder eg@keba.com 2025-04-09T19:08:30+00:00 urn:sha1:7e581c193bde7d5ac49587d9a182e5d13e05547c The KEBA battery monitoring controller is found in the system FPGA of KEBA PLC devices. It puts a load on the coin cell battery to check the state of the battery. If the coin cell battery is nearly empty, then the user space is signaled with a hwmon alarm. The auxiliary device for this driver is instantiated by the cp500 misc driver. Signed-off-by: Gerhard Engleder <eg@keba.com> Link: https://lore.kernel.org/r/20250409190830.60489-1-gerhard@engleder-embedded.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2025-03-18T15:03:40+00:00 Andrei Lalaev andrey.lalaev@gmail.com 2025-02-17T05:10:55+00:00 urn:sha1:bf1bb26f23f10f835e596337604d32d34ab798a6 Add base support for HTU31 temperature and humidity sensor. Besides temperature and humidity values, the driver also exports a 24-bit heater control to sysfs and serial number to debugfs. Signed-off-by: Andrei Lalaev <andrey.lalaev@gmail.com> Link: https://lore.kernel.org/r/20250217051110.46827-2-andrey.lalaev@gmail.com [groeck: Fixed continuation line alignment] Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2025-03-17T18:15:53+00:00 Thomas Richard thomas.richard@bootlin.com 2025-02-03T11:01:05+00:00 urn:sha1:08ebc9def79fc0c4dbb6ecc39263006e3f98b750 Add support for the Congatec Board Controller. This controller exposes temperature, voltage, current and fan sensors. The available sensors list cannot be predicted. Some sensors can be present or not, depending the system. The driver has an internal list of all possible sensors, for all Congatec boards. The Board Controller gives to the driver its sensors list, and their status (active or not). Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> Link: https://lore.kernel.org/r/20250203-congatec-board-controller-hwmon-v4-1-ff6c76a4662c@bootlin.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> 2024-12-17T13:14:48+00:00 Heiko Stuebner heiko@sntech.de 2024-11-07T11:47:10+00:00 urn:sha1:9855caf5d4eb1d8b8bba60be256186ea8e0f907c The MCU can be found on network-attached-storage devices made by QNAP and provides access to fan control including reading back its RPM as well as reading the temperature of the NAS case. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20241107114712.538976-8-heiko@sntech.de Signed-off-by: Lee Jones <lee@kernel.org> 2024-11-10T22:48:07+00:00 Ban Feng kcfeng0@nuvoton.com 2024-10-22T05:29:05+00:00 urn:sha1:46b94c485ed197bc681da242440c6e2315697c57 The NCT7363Y is a fan controller which provides up to 16 independent FAN input monitors. It can report each FAN input count values. The NCT7363Y also provides up to 16 independent PWM outputs. Each PWM can output specific PWM signal by manual mode to control the FAN duty outside. Signed-off-by: Ban Feng <kcfeng0@nuvoton.com> Message-ID: <20241022052905.4062682-3-kcfeng0@nuvoton.com> [groeck: Dropped unnecessary variable initialization, and , after { }] Signed-off-by: Guenter Roeck <linux@roeck-us.net>