starfive-tech/linux.git/drivers/base, branch visionfive_v1_5.13

PCI/MSI: Protect msi_desc::masked for multi-MSI

2021-08-18T07:07:06+00:00

commit 77e89afc25f30abd56e76a809ee2884d7c1b63ce upstream. Multi-MSI uses a single MSI descriptor and there is a single mask register when the device supports per vector masking. To avoid reading back the mask register the value is cached in the MSI descriptor and updates are done by clearing and setting bits in the cache and writing it to the device. But nothing protects msi_desc::masked and the mask register from being modified concurrently on two different CPUs for two different Linux interrupts which belong to the same multi-MSI descriptor. Add a lock to struct device and protect any operation on the mask and the mask register with it. This makes the update of msi_desc::masked unconditional, but there is no place which requires a modification of the hardware register without updating the masked cache. msi_mask_irq() is now an empty wrapper which will be cleaned up in follow up changes. The problem goes way back to the initial support of multi-MSI, but picking the commit which introduced the mask cache is a valid cut off point (2.6.30). Fixes: f2440d9acbe8 ("PCI MSI: Refactor interrupt masking code") Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Reviewed-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210729222542.726833414@linutronix.de Signed-off-by: Greg Kroah-Hartman

drivers core: Fix oops when driver probe fails

2021-08-12T11:32:19+00:00

commit 4d1014c1816c0395eca5d1d480f196a4c63119d0 upstream. dma_range_map is freed to early, which might cause an oops when a driver probe fails. Call trace: is_free_buddy_page+0xe4/0x1d4 __free_pages+0x2c/0x88 dma_free_contiguous+0x64/0x80 dma_direct_free+0x38/0xb4 dma_free_attrs+0x88/0xa0 dmam_release+0x28/0x34 release_nodes+0x78/0x8c devres_release_all+0xa8/0x110 really_probe+0x118/0x2d0 __driver_probe_device+0xc8/0xe0 driver_probe_device+0x54/0xec __driver_attach+0xe0/0xf0 bus_for_each_dev+0x7c/0xc8 driver_attach+0x30/0x3c bus_add_driver+0x17c/0x1c4 driver_register+0xc0/0xf8 __platform_driver_register+0x34/0x40 ... This issue is introduced by commit d0243bbd5dd3 ("drivers core: Free dma_range_map when driver probe failed"). It frees dma_range_map before the call to devres_release_all, which is too early. The solution is to free dma_range_map only after devres_release_all. Fixes: d0243bbd5dd3 ("drivers core: Free dma_range_map when driver probe failed") Cc: stable Signed-off-by: Filip Schauer Link: https://lore.kernel.org/r/20210727112311.GA7645@DESKTOP-E8BN1B0.localdomain Signed-off-by: Greg Kroah-Hartman

firmware_loader: fix use-after-free in firmware_fallback_sysfs

2021-08-12T11:32:13+00:00

commit 75d95e2e39b27f733f21e6668af1c9893a97de5e upstream. This use-after-free happens when a fw_priv object has been freed but hasn't been removed from the pending list (pending_fw_head). The next time fw_load_sysfs_fallback tries to insert into the list, it ends up accessing the pending_list member of the previously freed fw_priv. The root cause here is that all code paths that abort the fw load don't delete it from the pending list. For example: _request_firmware() -> fw_abort_batch_reqs() -> fw_state_aborted() To fix this, delete the fw_priv from the list in __fw_set_state() if the new state is DONE or ABORTED. This way, all aborts will remove the fw_priv from the list. Accordingly, remove calls to list_del_init that were being made before calling fw_state_(aborted|done). Also, in fw_load_sysfs_fallback, don't add the fw_priv to the pending list if it is already aborted. Instead, just jump out and return early. Fixes: bcfbd3523f3c ("firmware: fix a double abort case with fw_load_sysfs_fallback") Cc: stable Reported-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Tested-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Link: https://lore.kernel.org/r/20210728085107.4141-3-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman

firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback

2021-08-12T11:32:13+00:00

commit 0d6434e10b5377a006f6dd995c8fc5e2d82acddc upstream. The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb ("firmware loader: Fix _request_firmware_load() return val for fw load abort") was to distinguish the error from -ENOMEM, and so there is no real reason in keeping it. -EAGAIN is typically used to tell the userspace to try something again and in this case re-using the sysfs loading interface cannot be retried when a timeout happens, so the return value is also bogus. -ETIMEDOUT is received when the wait times out and returning that is much more telling of what the reason for the failure was. So, just propagate that instead of returning -EAGAIN. Suggested-by: Luis Chamberlain Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Cc: stable Link: https://lore.kernel.org/r/20210728085107.4141-2-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman

driver core: Prevent warning when removing a device link from unregistered consumer

2021-07-28T12:37:40+00:00

commit e64daad660a0c9ace3acdc57099fffe5ed83f977 upstream. sysfs_remove_link() causes a warning if the parent directory does not exist. That can happen if the device link consumer has not been registered. So do not attempt sysfs_remove_link() in that case. Fixes: 287905e68dd29 ("driver core: Expose device link details in sysfs") Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # 5.9+ Reviewed-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20210716114408.17320-2-adrian.hunter@intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

driver core: auxiliary bus: Fix memory leak when driver_register() fail

2021-07-28T12:37:38+00:00

commit 4afa0c22eed33cfe0c590742387f0d16f32412f3 upstream. If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register() Fixes: 7de3697e9cbd4 ("Add auxiliary bus support") Reviewed-by: Dan Williams Cc: stable Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20210713093438.3173-1-peter.ujfalusi@linux.intel.com Signed-off-by: Greg Kroah-Hartman

arch_topology: Avoid use-after-free for scale_freq_data

2021-07-20T14:00:31+00:00

[ Upstream commit 83150f5d05f065fb5c12c612f119015cabdcc124 ] Currently topology_scale_freq_tick() (which gets called from scheduler_tick()) may end up using a pointer to "struct scale_freq_data", which was previously cleared by topology_clear_scale_freq_source(), as there is no protection in place here. The users of topology_clear_scale_freq_source() though needs a guarantee that the previously cleared scale_freq_data isn't used anymore, so they can free the related resources. Since topology_scale_freq_tick() is called from scheduler tick, we don't want to add locking in there. Use the RCU update mechanism instead (which is already used by the scheduler's utilization update path) to guarantee race free updates here. synchronize_rcu() makes sure that all RCU critical sections that started before it is called, will finish before it returns. And so the callers of topology_clear_scale_freq_source() don't need to worry about their callback getting called anymore. Cc: Paul E. McKenney Fixes: 01e055c120a4 ("arch_topology: Allow multiple entities to provide sched_freq_tick() callback") Tested-by: Vincent Guittot Reviewed-by: Ionela Voinescu Tested-by: Qian Cai Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin

software node: Handle software node injection to an existing device properly

2021-06-23T17:34:58+00:00

The function software_node_notify() - the function that creates and removes the symlinks between the node and the device - was called unconditionally in device_add_software_node() and device_remove_software_node(), but it needs to be called in those functions only in the special case where the node is added to a device that has already been registered. This fixes NULL pointer dereference that happens if device_remove_software_node() is used with device that was never registered. Fixes: b622b24519f5 ("software node: Allow node addition to already existing device") Reported-and-tested-by: Dominik Brodowski Reviewed-by: Andy Shevchenko Signed-off-by: Heikki Krogerus Signed-off-by: Rafael J. Wysocki

drivers/base/memory: fix trying offlining memory blocks with memory holes on aarch64

2021-06-05T15:58:11+00:00

offline_pages() properly checks for memory holes and bails out. However, we do a page_zone(pfn_to_page(start_pfn)) before calling offline_pages() when offlining a memory block. We should not unconditionally call page_zone(pfn_to_page(start_pfn)) on aarch64 in offlining code, otherwise we can trigger a BUG when hitting a memory hole: kernel BUG at include/linux/mm.h:1383! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: loop processor efivarfs ip_tables x_tables ext4 mbcache jbd2 dm_mod igb nvme i2c_algo_bit mlx5_core i2c_core nvme_core firmware_class CPU: 13 PID: 1694 Comm: ranbug Not tainted 5.12.0-next-20210524+ #4 Hardware name: MiTAC RAPTOR EV-883832-X3-0001/RAPTOR, BIOS 1.6 06/28/2020 pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) pc : memory_subsys_offline+0x1f8/0x250 lr : memory_subsys_offline+0x1f8/0x250 Call trace: memory_subsys_offline+0x1f8/0x250 device_offline+0x154/0x1d8 online_store+0xa4/0x118 dev_attr_store+0x44/0x78 sysfs_kf_write+0xe8/0x138 kernfs_fop_write_iter+0x26c/0x3d0 new_sync_write+0x2bc/0x4f8 vfs_write+0x718/0xc88 ksys_write+0xf8/0x1e0 __arm64_sys_write+0x74/0xa8 invoke_syscall.constprop.0+0x78/0x1e8 do_el0_svc+0xe4/0x298 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb8 el0_sync+0x178/0x180 Kernel panic - not syncing: Oops - BUG: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x00000251,20000846 Memory Limit: none If nr_vmemmap_pages is set, we know that we are dealing with hotplugged memory that doesn't have any holes. So call page_zone(pfn_to_page(start_pfn)) only when really necessary -- when nr_vmemmap_pages is set and we actually adjust the present pages. Link: https://lkml.kernel.org/r/20210526075226.5572-1-david@redhat.com Fixes: a08a2ae34613 ("mm,memory_hotplug: allocate memmap from the added memory range") Signed-off-by: David Hildenbrand Reported-by: Qian Cai (QUIC) Reviewed-by: Oscar Salvador Acked-by: Michal Hocko Cc: Anshuman Khandual Cc: Mike Rapoport Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers: base: Reduce device link removal code duplication

2021-05-21T20:12:14+00:00

Reduce device link removal code duplication between the cases when SRCU is enabled and when it is disabled by moving the only differing piece of it (which is the removal of the link from the consumer and supplier lists) into a separate wrapper function (defined differently for each of the cases in question). No intentional functional impact. Reviewed-by: Saravana Kannan Signed-off-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/4326215.LvFx2qVVIh@kreacher Signed-off-by: Greg Kroah-Hartman