starfive-tech/linux.git/Documentation, branch visionfive

[WIP] dt-bindings: dma: dw-axi-dmac: Increase DMA channel limit to 16

2025-10-09T11:18:20+00:00

The first DMAC instance in the StarFive JH7100 SoC supports 16 DMA channels. FIXME Given there are more changes to the driver than just increasing DMAC_MAX_CHANNELS, we probably need a new compatible value, too. Signed-off-by: Geert Uytterhoeven

pinctrl: starfive: Reset pinmux settings

2025-10-09T11:18:19+00:00

Current u-boot doesn't seem to take into account that some GPIOs are configured as inputs/outputs of certain peripherals on power-up. This means it ends up configuring some GPIOs as inputs to more than one peripheral which the documentation explicitly says is illegal. Similarly it also ends up configuring more than one GPIO as output of the same peripheral. While not explicitly mentioned by the documentation this also seems like a bad idea. The easiest way to remedy this mess is to just disconnect all GPIOs from peripherals and have our pinmux configuration set everything up properly. This, however, means that we'd disconnect the serial console from its pins for a while, so add a device tree property to keep certain GPIOs from being reset. Signed-off-by: Emil Renner Berthing

dt-bindings: reset: Add starfive,jh7100-audrst bindings

2025-10-09T11:18:18+00:00

Add bindings for the audio reset controller on the StarFive JH7100 RISC-V SoC. Signed-off-by: Emil Renner Berthing

Merge tag 'i2c-for-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2025-09-28T20:19:23+00:00

Pull i2c fixes from Wolfram Sang: - various MAINTAINERS updates - fix an off-by-one error in riic - fix k1 DT schema to allow validation - rtl9300: fix faulty merge conflict resolution * tag 'i2c-for-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: rtl9300: Drop unsupported I2C_FUNC_SMBUS_I2C_BLOCK MAINTAINERS: add entry for SpacemiT K1 I2C driver MAINTAINERS: Add me as maintainer of Synopsys DesignWare I2C driver MAINTAINERS: delete email for Tharun Kumar P dt-bindings: i2c: spacemit: extend and validate all properties i2c: riic: Allow setting frequencies lower than 50KHz MAINTAINERS: Remove myself as Synopsys DesignWare I2C maintainer MAINTAINERS: Update email address for Qualcomm's I2C GENI maintainers

Merge tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

2025-09-26T17:28:11+00:00

Pull x86 platform driver fixes from Ilpo Järvinen: "Fixes and New HW Supoort - amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD - dell: Set USTT mode according to BIOS after reboot - dell-lis3lv02d: Add Latitude E6530 - lg-laptop: Fix setting the fan mode" * tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: lg-laptop: Fix WMAB call in fan_mode_store() platform/x86: dell-lis3lv02d: Add Latitude E6530 platform/x86/dell: Set USTT mode according to BIOS after reboot platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list

platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()

2025-09-25T09:21:43+00:00

When WMAB is called to set the fan mode, the new mode is read from either bits 0-1 or bits 4-5 (depending on the value of some other EC register). Thus when WMAB is called with bits 4-5 zeroed and called again with bits 0-1 zeroed, the second call undoes the effect of the first call. This causes writes to /sys/devices/platform/lg-laptop/fan_mode to have no effect (and causes reads to always report a status of zero). Fix this by calling WMAB once, with the mode set in bits 0,1 and 4,5. When the fan mode is returned from WMAB it always has this form, so there is no need to preserve the other bits. As a bonus, the driver now supports the "Performance" fan mode seen in the LG-provided Windows control app, which provides less aggressive CPU throttling but louder fan noise and shorter battery life. Also, correct the documentation to reflect that 0 corresponds to the default mode (what the Windows app calls "Optimal") and 1 corresponds to the silent mode. Fixes: dbf0c5a6b1f8 ("platform/x86: Add LG Gram laptop special features driver") Link: https://bugzilla.kernel.org/show_bug.cgi?id=204913#c4 Signed-off-by: Daniel Lee Link: https://patch.msgid.link/MN2PR06MB55989CB10E91C8DA00EE868DDC1CA@MN2PR06MB5598.namprd06.prod.outlook.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen

dt-bindings: i2c: spacemit: extend and validate all properties

2025-09-23T19:16:48+00:00

Extend the K1 I2C properties by including generic i2c-controller schema. and this will enable it to do the DT validation check later. Signed-off-by: Yixun Lan Reviewed-by: Troy Mitchell Tested-by: Alex Elder Acked-by: Conor Dooley Signed-off-by: Wolfram Sang

Merge tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2025-09-19T15:22:07+00:00

Pull sound fixes from Takashi Iwai: "A collection of small fixes. The volume became higher than wished, but nothing really stands out -- all small, nice and smooth. A slightly large change is found in qcom USB-audio offload stuff, but this is a regression fix specific to this device, hence it should be safe to apply at this late stage. - Various small fixes for ASoC Cirrus, Realtek, lpass, Intel and Qualcomm drivers - ASoC SoundWire fixes - A few TAS2781 HD-audio side-codec driver fixes - A fix for Qualcomm USB-audio offload breakage - Usual a few HD-audio quirks" * tag 'sound-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits) ALSA: hda/realtek: Fix mute led for HP Laptop 15-dw4xx ALSA: hda: intel-dsp-config: Prevent SEGFAULT if ACPI_HANDLE() is NULL ALSA: usb: qcom: Fix false-positive address space check ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue ASoC: Intel: PTL: Add entry for HDMI-In capture support to non-I2S codec boards. ASoC: amd: acp: Fix incorrect retrival of acp_chip_info ASoC: Intel: sof_sdw: use PRODUCT_FAMILY for Fatcat series ASoC: qcom: sc8280xp: Fix sound card driver name match data for QCS8275 ALSA: hda/realtek: Fix volume control on Lenovo Thinkbook 13x Gen 4 ALSA: hda/realtek: Support Lenovo Thinkbook 13x Gen 5 ALSA: hda: cs35l41: Support Lenovo Thinkbook 13x Gen 5 ALSA: hda/realtek: Add ALC295 Dell TAS2781 I2C fixup ALSA: hda/tas2781: Fix a potential race condition that causes a NULL pointer in case no efi.get_variable exsits ASoC: qcom: sc8280xp: Enable DAI format configuration for MI2S interfaces ASoC: qcom: q6apm-lpass-dais: Fix missing set_fmt DAI op for I2S ASoC: qcom: audioreach: Fix lpaif_type configuration for the I2S interface ASoC: Intel: catpt: Expose correct bit depth to userspace ALSA: hda/tas2781: Fix the order of TAS2781 calibrated-data ASoC: codecs: lpass-wsa-macro: Fix speaker quality distortion ASoC: codecs: lpass-rx-macro: Fix playback quality distortion ...

Merge tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2025-09-18T17:22:02+00:00

Pull networking fixes from Jakub Kicinski: "Including fixes from wireless. No known regressions at this point. Current release - fix to a fix: - eth: Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set" - wifi: iwlwifi: pcie: fix byte count table for 7000/8000 devices - net: clear sk->sk_ino in sk_set_socket(sk, NULL), fix CRIU Previous releases - regressions: - bonding: set random address only when slaves already exist - rxrpc: fix untrusted unsigned subtract - eth: - ice: fix Rx page leak on multi-buffer frames - mlx5: don't return mlx5_link_info table when speed is unknown Previous releases - always broken: - tls: make sure to abort the stream if headers are bogus - tcp: fix null-deref when using TCP-AO with TCP_REPAIR - dpll: fix skipping last entry in clock quality level reporting - eth: qed: don't collect too many protection override GRC elements, fix memory corruption" * tag 'net-6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp() cnic: Fix use-after-free bugs in cnic_delete_task devlink rate: Remove unnecessary 'static' from a couple places MAINTAINERS: update sundance entry net: liquidio: fix overflow in octeon_init_instr_queue() net: clear sk->sk_ino in sk_set_socket(sk, NULL) Revert "net/mlx5e: Update and set Xon/Xoff upon port speed set" selftests: tls: test skb copy under mem pressure and OOB tls: make sure to abort the stream if headers are bogus selftest: packetdrill: Add tcp_fastopen_server_reset-after-disconnect.pkt. tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). octeon_ep: fix VF MAC address lifecycle handling selftests: bonding: add vlan over bond testing bonding: don't set oif to bond dev when getting NS target destination net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer net/mlx5e: Add a miss level for ipsec crypto offload net/mlx5e: Harden uplink netdev access against device unbind MAINTAINERS: make the DPLL entry cover drivers doc/netlink: Fix typos in operation attributes igc: don't fail igc_probe() on LED setup error ...

Merge tag 'asoc-fix-v6.17-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

2025-09-18T07:11:12+00:00

ASoC: Fixes for v6.17 A pile of fixes that accumilated over the past few -rcs, this is all driver specifics including a small pile of quirks for new systems.