1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* linux/drivers/video/mmp/hw/mmp_spi.c
* using the spi in LCD controler for commands send
*
* Copyright (C) 2012 Marvell Technology Group Ltd.
* Authors: Guoqing Li <ligq@marvell.com>
* Lisa Du <cldu@marvell.com>
* Zhou Zhu <zzhu3@marvell.com>
*/
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/spi/spi.h>
#include "mmp_ctrl.h"
/**
* spi_write - write command to the SPI port
* @data: can be 8/16/32-bit, MSB justified data to write.
* @len: data length.
*
* Wait bus transfer complete IRQ.
* The caller is expected to perform the necessary locking.
*
* Returns:
* %-ETIMEDOUT timeout occurred
* 0 success
*/
static inline int lcd_spi_write(struct spi_device *spi, u32 data)
{
int timeout = 100000, isr, ret = 0;
u32 tmp;
void *reg_base =
*(void **)spi_master_get_devdata(spi->master);
/* clear ISR */
writel_relaxed(~SPI_IRQ_MASK, reg_base + SPU_IRQ_ISR);
switch (spi->bits_per_word) {
case 8:
writel_relaxed((u8)data, reg_base + LCD_SPU_SPI_TXDATA);
break;
case 16:
writel_relaxed((u16)data, reg_base + LCD_SPU_SPI_TXDATA);
break;
case 32:
writel_relaxed((u32)data, reg_base + LCD_SPU_SPI_TXDATA);
break;
default:
dev_err(&spi->dev, "Wrong spi bit length\n");
}
/* SPI start to send command */
tmp = readl_relaxed(reg_base + LCD_SPU_SPI_CTRL);
tmp &= ~CFG_SPI_START_MASK;
tmp |= CFG_SPI_START(1);
writel(tmp, reg_base + LCD_SPU_SPI_CTRL);
isr = readl_relaxed(reg_base + SPU_IRQ_ISR);
while (!(isr & SPI_IRQ_ENA_MASK)) {
udelay(100);
isr = readl_relaxed(reg_base + SPU_IRQ_ISR);
if (!--timeout) {
ret = -ETIMEDOUT;
dev_err(&spi->dev, "spi cmd send time out\n");
break;
}
}
tmp = readl_relaxed(reg_base + LCD_SPU_SPI_CTRL);
tmp &= ~CFG_SPI_START_MASK;
tmp |= CFG_SPI_START(0);
writel_relaxed(tmp, reg_base + LCD_SPU_SPI_CTRL);
writel_relaxed(~SPI_IRQ_MASK, reg_base + SPU_IRQ_ISR);
return ret;
}
static int lcd_spi_setup(struct spi_device *spi)
{
void *reg_base =
*(void **)spi_master_get_devdata(spi->master);
u32 tmp;
tmp = CFG_SCLKCNT(16) |
CFG_TXBITS(spi->bits_per_word) |
CFG_SPI_SEL(1) | CFG_SPI_ENA(1) |
CFG_SPI_3W4WB(1);
writel(tmp, reg_base + LCD_SPU_SPI_CTRL);
/*
* After set mode it need a time to pull up the spi singals,
* or it would cause the wrong waveform when send spi command,
* especially on pxa910h
*/
tmp = readl_relaxed(reg_base + SPU_IOPAD_CONTROL);
if ((tmp & CFG_IOPADMODE_MASK) != IOPAD_DUMB18SPI)
writel_relaxed(IOPAD_DUMB18SPI |
(tmp & ~CFG_IOPADMODE_MASK),
reg_base + SPU_IOPAD_CONTROL);
udelay(20);
return 0;
}
static int lcd_spi_one_transfer(struct spi_device *spi, struct spi_message *m)
{
struct spi_transfer *t;
int i;
list_for_each_entry(t, &m->transfers, transfer_list) {
switch (spi->bits_per_word) {
case 8:
for (i = 0; i < t->len; i++)
lcd_spi_write(spi, ((u8 *)t->tx_buf)[i]);
break;
case 16:
for (i = 0; i < t->len/2; i++)
lcd_spi_write(spi, ((u16 *)t->tx_buf)[i]);
break;
case 32:
for (i = 0; i < t->len/4; i++)
lcd_spi_write(spi, ((u32 *)t->tx_buf)[i]);
break;
default:
dev_err(&spi->dev, "Wrong spi bit length\n");
}
}
m->status = 0;
if (m->complete)
m->complete(m->context);
return 0;
}
int lcd_spi_register(struct mmphw_ctrl *ctrl)
{
struct spi_master *master;
void **p_regbase;
int err;
master = spi_alloc_master(ctrl->dev, sizeof(void *));
if (!master) {
dev_err(ctrl->dev, "unable to allocate SPI master\n");
return -ENOMEM;
}
p_regbase = spi_master_get_devdata(master);
*p_regbase = ctrl->reg_base;
/* set bus num to 5 to avoid conflict with other spi hosts */
master->bus_num = 5;
master->num_chipselect = 1;
master->setup = lcd_spi_setup;
master->transfer = lcd_spi_one_transfer;
err = spi_register_master(master);
if (err < 0) {
dev_err(ctrl->dev, "unable to register SPI master\n");
spi_master_put(master);
return err;
}
dev_info(&master->dev, "registered\n");
return 0;
}
|
