1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
|
/*
* 8250_lpss.c - Driver for UART on Intel Braswell and various other Intel SoCs
*
* Copyright (C) 2016 Intel Corporation
* Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/rational.h>
#include <linux/dmaengine.h>
#include <linux/dma/dw.h>
#include "8250.h"
#define PCI_DEVICE_ID_INTEL_QRK_UARTx 0x0936
#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
#define PCI_DEVICE_ID_INTEL_BSW_UART1 0x228a
#define PCI_DEVICE_ID_INTEL_BSW_UART2 0x228c
#define PCI_DEVICE_ID_INTEL_BDW_UART1 0x9ce3
#define PCI_DEVICE_ID_INTEL_BDW_UART2 0x9ce4
/* Intel LPSS specific registers */
#define BYT_PRV_CLK 0x800
#define BYT_PRV_CLK_EN BIT(0)
#define BYT_PRV_CLK_M_VAL_SHIFT 1
#define BYT_PRV_CLK_N_VAL_SHIFT 16
#define BYT_PRV_CLK_UPDATE BIT(31)
#define BYT_TX_OVF_INT 0x820
#define BYT_TX_OVF_INT_MASK BIT(1)
struct lpss8250;
struct lpss8250_board {
unsigned long freq;
unsigned int base_baud;
int (*setup)(struct lpss8250 *, struct uart_port *p);
void (*exit)(struct lpss8250 *);
};
struct lpss8250 {
int line;
struct lpss8250_board *board;
/* DMA parameters */
struct uart_8250_dma dma;
struct dw_dma_chip dma_chip;
struct dw_dma_slave dma_param;
u8 dma_maxburst;
};
static void byt_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
unsigned int baud = tty_termios_baud_rate(termios);
struct lpss8250 *lpss = p->private_data;
unsigned long fref = lpss->board->freq, fuart = baud * 16;
unsigned long w = BIT(15) - 1;
unsigned long m, n;
u32 reg;
/* Gracefully handle the B0 case: fall back to B9600 */
fuart = fuart ? fuart : 9600 * 16;
/* Get Fuart closer to Fref */
fuart *= rounddown_pow_of_two(fref / fuart);
/*
* For baud rates 0.5M, 1M, 1.5M, 2M, 2.5M, 3M, 3.5M and 4M the
* dividers must be adjusted.
*
* uartclk = (m / n) * 100 MHz, where m <= n
*/
rational_best_approximation(fuart, fref, w, w, &m, &n);
p->uartclk = fuart;
/* Reset the clock */
reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
writel(reg, p->membase + BYT_PRV_CLK);
reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
writel(reg, p->membase + BYT_PRV_CLK);
p->status &= ~UPSTAT_AUTOCTS;
if (termios->c_cflag & CRTSCTS)
p->status |= UPSTAT_AUTOCTS;
serial8250_do_set_termios(p, termios, old);
}
static unsigned int byt_get_mctrl(struct uart_port *port)
{
unsigned int ret = serial8250_do_get_mctrl(port);
/* Force DCD and DSR signals to permanently be reported as active */
ret |= TIOCM_CAR | TIOCM_DSR;
return ret;
}
static int byt_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
struct dw_dma_slave *param = &lpss->dma_param;
struct uart_8250_port *up = up_to_u8250p(port);
struct pci_dev *pdev = to_pci_dev(port->dev);
unsigned int dma_devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
struct pci_dev *dma_dev = pci_get_slot(pdev->bus, dma_devfn);
switch (pdev->device) {
case PCI_DEVICE_ID_INTEL_BYT_UART1:
case PCI_DEVICE_ID_INTEL_BSW_UART1:
case PCI_DEVICE_ID_INTEL_BDW_UART1:
param->src_id = 3;
param->dst_id = 2;
break;
case PCI_DEVICE_ID_INTEL_BYT_UART2:
case PCI_DEVICE_ID_INTEL_BSW_UART2:
case PCI_DEVICE_ID_INTEL_BDW_UART2:
param->src_id = 5;
param->dst_id = 4;
break;
default:
return -EINVAL;
}
param->dma_dev = &dma_dev->dev;
param->m_master = 0;
param->p_master = 1;
/* TODO: Detect FIFO size automaticaly for DesignWare 8250 */
port->fifosize = 64;
up->tx_loadsz = 64;
lpss->dma_maxburst = 16;
port->set_termios = byt_set_termios;
port->get_mctrl = byt_get_mctrl;
/* Disable TX counter interrupts */
writel(BYT_TX_OVF_INT_MASK, port->membase + BYT_TX_OVF_INT);
return 0;
}
#ifdef CONFIG_SERIAL_8250_DMA
static const struct dw_dma_platform_data qrk_serial_dma_pdata = {
.nr_channels = 2,
.is_private = true,
.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
.chan_priority = CHAN_PRIORITY_ASCENDING,
.block_size = 4095,
.nr_masters = 1,
.data_width = {4},
.multi_block = {0},
};
static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
{
struct uart_8250_dma *dma = &lpss->dma;
struct dw_dma_chip *chip = &lpss->dma_chip;
struct dw_dma_slave *param = &lpss->dma_param;
struct pci_dev *pdev = to_pci_dev(port->dev);
int ret;
chip->dev = &pdev->dev;
chip->irq = pci_irq_vector(pdev, 0);
chip->regs = pci_ioremap_bar(pdev, 1);
chip->pdata = &qrk_serial_dma_pdata;
/* Falling back to PIO mode if DMA probing fails */
ret = dw_dma_probe(chip);
if (ret)
return;
pci_set_master(pdev);
pci_try_set_mwi(pdev);
/* Special DMA address for UART */
dma->rx_dma_addr = 0xfffff000;
dma->tx_dma_addr = 0xfffff000;
param->dma_dev = &pdev->dev;
param->src_id = 0;
param->dst_id = 1;
param->hs_polarity = true;
lpss->dma_maxburst = 8;
}
static void qrk_serial_exit_dma(struct lpss8250 *lpss)
{
struct dw_dma_slave *param = &lpss->dma_param;
if (!param->dma_dev)
return;
dw_dma_remove(&lpss->dma_chip);
}
#else /* CONFIG_SERIAL_8250_DMA */
static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port) {}
static void qrk_serial_exit_dma(struct lpss8250 *lpss) {}
#endif /* !CONFIG_SERIAL_8250_DMA */
static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
{
struct pci_dev *pdev = to_pci_dev(port->dev);
int ret;
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
port->irq = pci_irq_vector(pdev, 0);
qrk_serial_setup_dma(lpss, port);
return 0;
}
static void qrk_serial_exit(struct lpss8250 *lpss)
{
qrk_serial_exit_dma(lpss);
}
static bool lpss8250_dma_filter(struct dma_chan *chan, void *param)
{
struct dw_dma_slave *dws = param;
if (dws->dma_dev != chan->device->dev)
return false;
chan->private = dws;
return true;
}
static int lpss8250_dma_setup(struct lpss8250 *lpss, struct uart_8250_port *port)
{
struct uart_8250_dma *dma = &lpss->dma;
struct dw_dma_slave *rx_param, *tx_param;
struct device *dev = port->port.dev;
if (!lpss->dma_param.dma_dev)
return 0;
rx_param = devm_kzalloc(dev, sizeof(*rx_param), GFP_KERNEL);
if (!rx_param)
return -ENOMEM;
tx_param = devm_kzalloc(dev, sizeof(*tx_param), GFP_KERNEL);
if (!tx_param)
return -ENOMEM;
*rx_param = lpss->dma_param;
dma->rxconf.src_maxburst = lpss->dma_maxburst;
*tx_param = lpss->dma_param;
dma->txconf.dst_maxburst = lpss->dma_maxburst;
dma->fn = lpss8250_dma_filter;
dma->rx_param = rx_param;
dma->tx_param = tx_param;
port->dma = dma;
return 0;
}
static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct uart_8250_port uart;
struct lpss8250 *lpss;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
if (!lpss)
return -ENOMEM;
lpss->board = (struct lpss8250_board *)id->driver_data;
memset(&uart, 0, sizeof(struct uart_8250_port));
uart.port.dev = &pdev->dev;
uart.port.irq = pdev->irq;
uart.port.private_data = lpss;
uart.port.type = PORT_16550A;
uart.port.iotype = UPIO_MEM;
uart.port.regshift = 2;
uart.port.uartclk = lpss->board->base_baud * 16;
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.capabilities = UART_CAP_FIFO | UART_CAP_AFE;
uart.port.mapbase = pci_resource_start(pdev, 0);
uart.port.membase = pcim_iomap(pdev, 0, 0);
if (!uart.port.membase)
return -ENOMEM;
ret = lpss->board->setup(lpss, &uart.port);
if (ret)
return ret;
ret = lpss8250_dma_setup(lpss, &uart);
if (ret)
goto err_exit;
ret = serial8250_register_8250_port(&uart);
if (ret < 0)
goto err_exit;
lpss->line = ret;
pci_set_drvdata(pdev, lpss);
return 0;
err_exit:
if (lpss->board->exit)
lpss->board->exit(lpss);
return ret;
}
static void lpss8250_remove(struct pci_dev *pdev)
{
struct lpss8250 *lpss = pci_get_drvdata(pdev);
serial8250_unregister_port(lpss->line);
if (lpss->board->exit)
lpss->board->exit(lpss);
}
static const struct lpss8250_board byt_board = {
.freq = 100000000,
.base_baud = 2764800,
.setup = byt_serial_setup,
};
static const struct lpss8250_board qrk_board = {
.freq = 44236800,
.base_baud = 2764800,
.setup = qrk_serial_setup,
.exit = qrk_serial_exit,
};
#define LPSS_DEVICE(id, board) { PCI_VDEVICE(INTEL, id), (kernel_ulong_t)&board }
static const struct pci_device_id pci_ids[] = {
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_QRK_UARTx, qrk_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART1, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BYT_UART2, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART1, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BSW_UART2, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART1, byt_board),
LPSS_DEVICE(PCI_DEVICE_ID_INTEL_BDW_UART2, byt_board),
{ },
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver lpss8250_pci_driver = {
.name = "8250_lpss",
.id_table = pci_ids,
.probe = lpss8250_probe,
.remove = lpss8250_remove,
};
module_pci_driver(lpss8250_pci_driver);
MODULE_AUTHOR("Intel Corporation");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Intel LPSS UART driver");
|