1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
|
/*
* Copyright (C) 2014 Marvell Technology Group Ltd.
*
* Antoine Tenart <antoine.tenart@free-electrons.com>
* Jisheng Zhang <jszhang@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
#define USB_PHY_PLL 0x04
#define USB_PHY_PLL_CONTROL 0x08
#define USB_PHY_TX_CTRL0 0x10
#define USB_PHY_TX_CTRL1 0x14
#define USB_PHY_TX_CTRL2 0x18
#define USB_PHY_RX_CTRL 0x20
#define USB_PHY_ANALOG 0x34
/* USB_PHY_PLL */
#define CLK_REF_DIV(x) ((x) << 4)
#define FEEDBACK_CLK_DIV(x) ((x) << 8)
/* USB_PHY_PLL_CONTROL */
#define CLK_STABLE BIT(0)
#define PLL_CTRL_PIN BIT(1)
#define PLL_CTRL_REG BIT(2)
#define PLL_ON BIT(3)
#define PHASE_OFF_TOL_125 (0x0 << 5)
#define PHASE_OFF_TOL_250 BIT(5)
#define KVC0_CALIB (0x0 << 9)
#define KVC0_REG_CTRL BIT(9)
#define KVC0_HIGH (0x0 << 10)
#define KVC0_LOW (0x3 << 10)
#define CLK_BLK_EN BIT(13)
/* USB_PHY_TX_CTRL0 */
#define EXT_HS_RCAL_EN BIT(3)
#define EXT_FS_RCAL_EN BIT(4)
#define IMPCAL_VTH_DIV(x) ((x) << 5)
#define EXT_RS_RCAL_DIV(x) ((x) << 8)
#define EXT_FS_RCAL_DIV(x) ((x) << 12)
/* USB_PHY_TX_CTRL1 */
#define TX_VDD15_14 (0x0 << 4)
#define TX_VDD15_15 BIT(4)
#define TX_VDD15_16 (0x2 << 4)
#define TX_VDD15_17 (0x3 << 4)
#define TX_VDD12_VDD (0x0 << 6)
#define TX_VDD12_11 BIT(6)
#define TX_VDD12_12 (0x2 << 6)
#define TX_VDD12_13 (0x3 << 6)
#define LOW_VDD_EN BIT(8)
#define TX_OUT_AMP(x) ((x) << 9)
/* USB_PHY_TX_CTRL2 */
#define TX_CHAN_CTRL_REG(x) ((x) << 0)
#define DRV_SLEWRATE(x) ((x) << 4)
#define IMP_CAL_FS_HS_DLY_0 (0x0 << 6)
#define IMP_CAL_FS_HS_DLY_1 BIT(6)
#define IMP_CAL_FS_HS_DLY_2 (0x2 << 6)
#define IMP_CAL_FS_HS_DLY_3 (0x3 << 6)
#define FS_DRV_EN_MASK(x) ((x) << 8)
#define HS_DRV_EN_MASK(x) ((x) << 12)
/* USB_PHY_RX_CTRL */
#define PHASE_FREEZE_DLY_2_CL (0x0 << 0)
#define PHASE_FREEZE_DLY_4_CL BIT(0)
#define ACK_LENGTH_8_CL (0x0 << 2)
#define ACK_LENGTH_12_CL BIT(2)
#define ACK_LENGTH_16_CL (0x2 << 2)
#define ACK_LENGTH_20_CL (0x3 << 2)
#define SQ_LENGTH_3 (0x0 << 4)
#define SQ_LENGTH_6 BIT(4)
#define SQ_LENGTH_9 (0x2 << 4)
#define SQ_LENGTH_12 (0x3 << 4)
#define DISCON_THRESHOLD_260 (0x0 << 6)
#define DISCON_THRESHOLD_270 BIT(6)
#define DISCON_THRESHOLD_280 (0x2 << 6)
#define DISCON_THRESHOLD_290 (0x3 << 6)
#define SQ_THRESHOLD(x) ((x) << 8)
#define LPF_COEF(x) ((x) << 12)
#define INTPL_CUR_10 (0x0 << 14)
#define INTPL_CUR_20 BIT(14)
#define INTPL_CUR_30 (0x2 << 14)
#define INTPL_CUR_40 (0x3 << 14)
/* USB_PHY_ANALOG */
#define ANA_PWR_UP BIT(1)
#define ANA_PWR_DOWN BIT(2)
#define V2I_VCO_RATIO(x) ((x) << 7)
#define R_ROTATE_90 (0x0 << 10)
#define R_ROTATE_0 BIT(10)
#define MODE_TEST_EN BIT(11)
#define ANA_TEST_DC_CTRL(x) ((x) << 12)
static const u32 phy_berlin_pll_dividers[] = {
/* Berlin 2 */
CLK_REF_DIV(0xc) | FEEDBACK_CLK_DIV(0x54),
/* Berlin 2CD */
CLK_REF_DIV(0x6) | FEEDBACK_CLK_DIV(0x55),
};
struct phy_berlin_usb_priv {
void __iomem *base;
struct reset_control *rst_ctrl;
u32 pll_divider;
};
static int phy_berlin_usb_power_on(struct phy *phy)
{
struct phy_berlin_usb_priv *priv = phy_get_drvdata(phy);
reset_control_reset(priv->rst_ctrl);
writel(priv->pll_divider,
priv->base + USB_PHY_PLL);
writel(CLK_STABLE | PLL_CTRL_REG | PHASE_OFF_TOL_250 | KVC0_REG_CTRL |
CLK_BLK_EN, priv->base + USB_PHY_PLL_CONTROL);
writel(V2I_VCO_RATIO(0x5) | R_ROTATE_0 | ANA_TEST_DC_CTRL(0x5),
priv->base + USB_PHY_ANALOG);
writel(PHASE_FREEZE_DLY_4_CL | ACK_LENGTH_16_CL | SQ_LENGTH_12 |
DISCON_THRESHOLD_260 | SQ_THRESHOLD(0xa) | LPF_COEF(0x2) |
INTPL_CUR_30, priv->base + USB_PHY_RX_CTRL);
writel(TX_VDD12_13 | TX_OUT_AMP(0x3), priv->base + USB_PHY_TX_CTRL1);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
priv->base + USB_PHY_TX_CTRL0);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4) |
EXT_FS_RCAL_DIV(0x2), priv->base + USB_PHY_TX_CTRL0);
writel(EXT_HS_RCAL_EN | IMPCAL_VTH_DIV(0x3) | EXT_RS_RCAL_DIV(0x4),
priv->base + USB_PHY_TX_CTRL0);
writel(TX_CHAN_CTRL_REG(0xf) | DRV_SLEWRATE(0x3) | IMP_CAL_FS_HS_DLY_3 |
FS_DRV_EN_MASK(0xd), priv->base + USB_PHY_TX_CTRL2);
return 0;
}
static const struct phy_ops phy_berlin_usb_ops = {
.power_on = phy_berlin_usb_power_on,
.owner = THIS_MODULE,
};
static const struct of_device_id phy_berlin_usb_of_match[] = {
{
.compatible = "marvell,berlin2-usb-phy",
.data = &phy_berlin_pll_dividers[0],
},
{
.compatible = "marvell,berlin2cd-usb-phy",
.data = &phy_berlin_pll_dividers[1],
},
{ },
};
MODULE_DEVICE_TABLE(of, phy_berlin_usb_of_match);
static int phy_berlin_usb_probe(struct platform_device *pdev)
{
const struct of_device_id *match =
of_match_device(phy_berlin_usb_of_match, &pdev->dev);
struct phy_berlin_usb_priv *priv;
struct resource *res;
struct phy *phy;
struct phy_provider *phy_provider;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
priv->rst_ctrl = devm_reset_control_get(&pdev->dev, NULL);
if (IS_ERR(priv->rst_ctrl))
return PTR_ERR(priv->rst_ctrl);
priv->pll_divider = *((u32 *)match->data);
phy = devm_phy_create(&pdev->dev, NULL, &phy_berlin_usb_ops);
if (IS_ERR(phy)) {
dev_err(&pdev->dev, "failed to create PHY\n");
return PTR_ERR(phy);
}
platform_set_drvdata(pdev, priv);
phy_set_drvdata(phy, priv);
phy_provider =
devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver phy_berlin_usb_driver = {
.probe = phy_berlin_usb_probe,
.driver = {
.name = "phy-berlin-usb",
.of_match_table = phy_berlin_usb_of_match,
},
};
module_platform_driver(phy_berlin_usb_driver);
MODULE_AUTHOR("Antoine Tenart <antoine.tenart@free-electrons.com>");
MODULE_DESCRIPTION("Marvell Berlin PHY driver for USB");
MODULE_LICENSE("GPL");
|
