1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
|
/*
* Copyright (C) 1999 - 2010 Intel Corporation.
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
*
* This code was derived from the Intel e1000e Linux driver.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include "pch_gbe.h"
#include "pch_gbe_phy.h"
#define PHY_MAX_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
#define PHY_CONTROL 0x00 /* Control Register */
#define PHY_STATUS 0x01 /* Status Regiser */
#define PHY_ID1 0x02 /* Phy Id Register (word 1) */
#define PHY_ID2 0x03 /* Phy Id Register (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Register */
#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Register */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Register */
#define PHY_EXT_STATUS 0x0F /* Extended Status Register */
#define PHY_PHYSP_CONTROL 0x10 /* PHY Specific Control Register */
#define PHY_EXT_PHYSP_CONTROL 0x14 /* Extended PHY Specific Control Register */
#define PHY_LED_CONTROL 0x18 /* LED Control Register */
#define PHY_EXT_PHYSP_STATUS 0x1B /* Extended PHY Specific Status Register */
/* PHY Control Register */
#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
#define MII_CR_POWER_DOWN 0x0800 /* Power down */
#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
#define MII_CR_SPEED_1000 0x0040
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
/* PHY Status Register */
#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Phy Id Register (word 2) */
#define PHY_REVISION_MASK 0x000F
/* PHY Specific Control Register */
#define PHYSP_CTRL_ASSERT_CRS_TX 0x0800
/* Default value of PHY register */
#define PHY_CONTROL_DEFAULT 0x1140 /* Control Register */
#define PHY_AUTONEG_ADV_DEFAULT 0x01e0 /* Autoneg Advertisement */
#define PHY_NEXT_PAGE_TX_DEFAULT 0x2001 /* Next Page TX */
#define PHY_1000T_CTRL_DEFAULT 0x0300 /* 1000Base-T Control Register */
#define PHY_PHYSP_CONTROL_DEFAULT 0x01EE /* PHY Specific Control Register */
/**
* pch_gbe_phy_get_id - Retrieve the PHY ID and revision
* @hw: Pointer to the HW structure
* Returns
* 0: Successful.
* Negative value: Failed.
*/
s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
{
struct pch_gbe_phy_info *phy = &hw->phy;
s32 ret;
u16 phy_id1;
u16 phy_id2;
ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID1, &phy_id1);
if (ret)
return ret;
ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID2, &phy_id2);
if (ret)
return ret;
/*
* PHY_ID1: [bit15-0:ID(21-6)]
* PHY_ID2: [bit15-10:ID(5-0)][bit9-4:Model][bit3-0:revision]
*/
phy->id = (u32)phy_id1;
phy->id = ((phy->id << 6) | ((phy_id2 & 0xFC00) >> 10));
phy->revision = (u32) (phy_id2 & 0x000F);
pr_debug("phy->id : 0x%08x phy->revision : 0x%08x\n",
phy->id, phy->revision);
return 0;
}
/**
* pch_gbe_phy_read_reg_miic - Read MII control register
* @hw: Pointer to the HW structure
* @offset: Register offset to be read
* @data: Pointer to the read data
* Returns
* 0: Successful.
* -EINVAL: Invalid argument.
*/
s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data)
{
struct pch_gbe_phy_info *phy = &hw->phy;
if (offset > PHY_MAX_REG_ADDRESS) {
pr_err("PHY Address %d is out of range\n", offset);
return -EINVAL;
}
*data = pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_READ,
offset, (u16)0);
return 0;
}
/**
* pch_gbe_phy_write_reg_miic - Write MII control register
* @hw: Pointer to the HW structure
* @offset: Register offset to be read
* @data: data to write to register at offset
* Returns
* 0: Successful.
* -EINVAL: Invalid argument.
*/
s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
{
struct pch_gbe_phy_info *phy = &hw->phy;
if (offset > PHY_MAX_REG_ADDRESS) {
pr_err("PHY Address %d is out of range\n", offset);
return -EINVAL;
}
pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_WRITE,
offset, data);
return 0;
}
/**
* pch_gbe_phy_sw_reset - PHY software reset
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
{
u16 phy_ctrl;
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &phy_ctrl);
phy_ctrl |= MII_CR_RESET;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, phy_ctrl);
udelay(1);
}
/**
* pch_gbe_phy_hw_reset - PHY hardware reset
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw)
{
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, PHY_CONTROL_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_AUTONEG_ADV,
PHY_AUTONEG_ADV_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_NEXT_PAGE_TX,
PHY_NEXT_PAGE_TX_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_1000T_CTRL, PHY_1000T_CTRL_DEFAULT);
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL,
PHY_PHYSP_CONTROL_DEFAULT);
}
/**
* pch_gbe_phy_power_up - restore link in case the phy was powered down
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_power_up(struct pch_gbe_hw *hw)
{
u16 mii_reg;
mii_reg = 0;
/* Just clear the power down bit to wake the phy back up */
/* according to the manual, the phy will retain its
* settings across a power-down/up cycle */
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
mii_reg &= ~MII_CR_POWER_DOWN;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
}
/**
* pch_gbe_phy_power_down - Power down PHY
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
{
u16 mii_reg;
mii_reg = 0;
/* Power down the PHY so no link is implied when interface is down *
* The PHY cannot be powered down if any of the following is TRUE *
* (a) WoL is enabled
* (b) AMT is active
*/
pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
mii_reg |= MII_CR_POWER_DOWN;
pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
mdelay(1);
}
/**
* pch_gbe_phy_set_rgmii - RGMII interface setting
* @hw: Pointer to the HW structure
*/
inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
{
pch_gbe_phy_sw_reset(hw);
}
/**
* pch_gbe_phy_init_setting - PHY initial setting
* @hw: Pointer to the HW structure
*/
void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
{
struct pch_gbe_adapter *adapter;
struct ethtool_cmd cmd;
int ret;
u16 mii_reg;
adapter = container_of(hw, struct pch_gbe_adapter, hw);
ret = mii_ethtool_gset(&adapter->mii, &cmd);
if (ret)
pr_err("Error: mii_ethtool_gset\n");
cmd.speed = hw->mac.link_speed;
cmd.duplex = hw->mac.link_duplex;
cmd.advertising = hw->phy.autoneg_advertised;
cmd.autoneg = hw->mac.autoneg;
pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
ret = mii_ethtool_sset(&adapter->mii, &cmd);
if (ret)
pr_err("Error: mii_ethtool_sset\n");
pch_gbe_phy_sw_reset(hw);
pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
}
|
