path: root/drivers/net/arcnet/arcdevice.h

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * INET         An implementation of the TCP/IP protocol suite for the LINUX
 *              operating system.  NET  is implemented using the  BSD Socket
 *              interface as the means of communication with the user level.
 *
 *              Definitions used by the ARCnet driver.
 *
 * Authors:     Avery Pennarun and David Woodhouse
 */
#ifndef _LINUX_ARCDEVICE_H
#define _LINUX_ARCDEVICE_H

#include <asm/timex.h>
#include <linux/if_arcnet.h>

#ifdef __KERNEL__
#include <linux/interrupt.h>

/*
 * RECON_THRESHOLD is the maximum number of RECON messages to receive
 * within one minute before printing a "cabling problem" warning. The
 * default value should be fine.
 *
 * After that, a "cabling restored" message will be printed on the next IRQ
 * if no RECON messages have been received for 10 seconds.
 *
 * Do not define RECON_THRESHOLD at all if you want to disable this feature.
 */
#define RECON_THRESHOLD 30

/*
 * Define this to the minimum "timeout" value.  If a transmit takes longer
 * than TX_TIMEOUT jiffies, Linux will abort the TX and retry.  On a large
 * network, or one with heavy network traffic, this timeout may need to be
 * increased.  The larger it is, though, the longer it will be between
 * necessary transmits - don't set this too high.
 */
#define TX_TIMEOUT (HZ * 200 / 1000)

/* Display warnings about the driver being an ALPHA version. */
#undef ALPHA_WARNING

/*
 * Debugging bitflags: each option can be enabled individually.
 *
 * Note: only debug flags included in the ARCNET_DEBUG_MAX define will
 *   actually be available.  GCC will (at least, GCC 2.7.0 will) notice
 *   lines using a BUGLVL not in ARCNET_DEBUG_MAX and automatically optimize
 *   them out.
 */
#define D_NORMAL	1	/* important operational info             */
#define D_EXTRA		2	/* useful, but non-vital information      */
#define	D_INIT		4	/* show init/probe messages               */
#define D_INIT_REASONS	8	/* show reasons for discarding probes     */
#define D_RECON		32	/* print a message whenever token is lost */
#define D_PROTO		64	/* debug auto-protocol support            */
/* debug levels below give LOTS of output during normal operation! */
#define D_DURING	128	/* trace operations (including irq's)     */
#define D_TX	        256	/* show tx packets                        */
#define D_RX		512	/* show rx packets                        */
#define D_SKB		1024	/* show skb's                             */
#define D_SKB_SIZE	2048	/* show skb sizes			  */
#define D_TIMING	4096	/* show time needed to copy buffers to card */
#define D_DEBUG         8192    /* Very detailed debug line for line */

#ifndef ARCNET_DEBUG_MAX
#define ARCNET_DEBUG_MAX (127)	/* change to ~0 if you want detailed debugging */
#endif

#ifndef ARCNET_DEBUG
#define ARCNET_DEBUG (D_NORMAL | D_EXTRA)
#endif
extern int arcnet_debug;

#define BUGLVL(x)	((x) & ARCNET_DEBUG_MAX & arcnet_debug)

/* macros to simplify debug checking */
#define arc_printk(x, dev, fmt, ...)					\
do {									\
	if (BUGLVL(x)) {						\
		if ((x) == D_NORMAL)					\
			netdev_warn(dev, fmt, ##__VA_ARGS__);		\
		else if ((x) < D_DURING)				\
			netdev_info(dev, fmt, ##__VA_ARGS__);		\
		else							\
			netdev_dbg(dev, fmt, ##__VA_ARGS__);		\
	}								\
} while (0)

#define arc_cont(x, fmt, ...)						\
do {									\
	if (BUGLVL(x))							\
		pr_cont(fmt, ##__VA_ARGS__);				\
} while (0)

/* see how long a function call takes to run, expressed in CPU cycles */
#define TIME(dev, name, bytes, call)					\
do {									\
	if (BUGLVL(D_TIMING)) {						\
		unsigned long _x, _y;					\
		_x = get_cycles();					\
		call;							\
		_y = get_cycles();					\
		arc_printk(D_TIMING, dev,				\
			   "%s: %d bytes in %lu cycles == %lu Kbytes/100Mcycle\n", \
			   name, bytes, _y - _x,			\
			   100000000 / 1024 * bytes / (_y - _x + 1));	\
	} else {							\
		call;							\
	}								\
} while (0)

/*
 * Time needed to reset the card - in ms (milliseconds).  This works on my
 * SMC PC100.  I can't find a reference that tells me just how long I
 * should wait.
 */
#define RESETtime (300)

/*
 * These are the max/min lengths of packet payload, not including the
 * arc_hardware header, but definitely including the soft header.
 *
 * Note: packet sizes 254, 255, 256 are impossible because of the way
 * ARCnet registers work  That's why RFC1201 defines "exception" packets.
 * In non-RFC1201 protocols, we have to just tack some extra bytes on the
 * end.
 */
#define MTU	253		/* normal packet max size */
#define MinTU	257		/* extended packet min size */
#define XMTU	508		/* extended packet max size */

/* status/interrupt mask bit fields */
#define TXFREEflag	0x01	/* transmitter available */
#define TXACKflag       0x02	/* transmitted msg. ackd */
#define RECONflag       0x04	/* network reconfigured */
#define TESTflag        0x08	/* test flag */
#define EXCNAKflag      0x08    /* excesive nak flag */
#define RESETflag       0x10	/* power-on-reset */
#define RES1flag        0x20	/* reserved - usually set by jumper */
#define RES2flag        0x40	/* reserved - usually set by jumper */
#define NORXflag        0x80	/* receiver inhibited */

/* Flags used for IO-mapped memory operations */
#define AUTOINCflag     0x40	/* Increase location with each access */
#define IOMAPflag       0x02	/* (for 90xx) Use IO mapped memory, not mmap */
#define ENABLE16flag    0x80	/* (for 90xx) Enable 16-bit mode */

/* in the command register, the following bits have these meanings:
 *                0-2     command
 *                3-4     page number (for enable rcv/xmt command)
 *                 7      receive broadcasts
 */
#define NOTXcmd         0x01	/* disable transmitter */
#define NORXcmd         0x02	/* disable receiver */
#define TXcmd           0x03	/* enable transmitter */
#define RXcmd           0x04	/* enable receiver */
#define CONFIGcmd       0x05	/* define configuration */
#define CFLAGScmd       0x06	/* clear flags */
#define TESTcmd         0x07	/* load test flags */
#define STARTIOcmd      0x18	/* start internal operation */

/* flags for "clear flags" command */
#define RESETclear      0x08	/* power-on-reset */
#define CONFIGclear     0x10	/* system reconfigured */

#define EXCNAKclear     0x0E    /* Clear and acknowledge the excive nak bit */

/* flags for "load test flags" command */
#define TESTload        0x08	/* test flag (diagnostic) */

/* byte deposited into first address of buffers on reset */
#define TESTvalue       0321	/* that's octal for 0xD1 :) */

/* for "enable receiver" command */
#define RXbcasts        0x80	/* receive broadcasts */

/* flags for "define configuration" command */
#define NORMALconf      0x00	/* 1-249 byte packets */
#define EXTconf         0x08	/* 250-504 byte packets */

/* card feature flags, set during auto-detection.
 * (currently only used by com20020pci)
 */
#define ARC_IS_5MBIT    1   /* card default speed is 5MBit */
#define ARC_CAN_10MBIT  2   /* card uses COM20022, supporting 10MBit,
				 but default is 2.5MBit. */
#define ARC_HAS_LED     4   /* card has software controlled LEDs */
#define ARC_HAS_ROTARY  8   /* card has rotary encoder */

/* information needed to define an encapsulation driver */
struct ArcProto {
	char suffix;		/* a for RFC1201, e for ether-encap, etc. */
	int mtu;		/* largest possible packet */
	int is_ip;              /* This is a ip plugin - not a raw thing */

	void (*rx)(struct net_device *dev, int bufnum,
		   struct archdr *pkthdr, int length);
	int (*build_header)(struct sk_buff *skb, struct net_device *dev,
			    unsigned short ethproto, uint8_t daddr);

	/* these functions return '1' if the skb can now be freed */
	int (*prepare_tx)(struct net_device *dev, struct archdr *pkt,
			  int length, int bufnum);
	int (*continue_tx)(struct net_device *dev, int bufnum);
	int (*ack_tx)(struct net_device *dev, int acked);
};

extern struct ArcProto *arc_proto_map[256], *arc_proto_default,
	*arc_bcast_proto, *arc_raw_proto;

/*
 * "Incoming" is information needed for each address that could be sending
 * to us.  Mostly for partially-received split packets.
 */
struct Incoming {
	struct sk_buff *skb;	/* packet data buffer             */
	__be16 sequence;	/* sequence number of assembly    */
	uint8_t lastpacket,	/* number of last packet (from 1) */
		numpackets;	/* number of packets in split     */
};

/* only needed for RFC1201 */
struct Outgoing {
	struct ArcProto *proto;	/* protocol driver that owns this:
				 *   if NULL, no packet is pending.
				 */
	struct sk_buff *skb;	/* buffer from upper levels */
	struct archdr *pkt;	/* a pointer into the skb */
	uint16_t length,	/* bytes total */
		dataleft,	/* bytes left */
		segnum,		/* segment being sent */
		numsegs;	/* number of segments */
};

#define ARCNET_LED_NAME_SZ (IFNAMSIZ + 6)

struct arcnet_local {
	uint8_t config,		/* current value of CONFIG register */
		timeout,	/* Extended timeout for COM20020 */
		backplane,	/* Backplane flag for COM20020 */
		clockp,		/* COM20020 clock divider */
		clockm,		/* COM20020 clock multiplier flag */
		setup,		/* Contents of setup1 register */
		setup2,		/* Contents of setup2 register */
		intmask;	/* current value of INTMASK register */
	uint8_t default_proto[256];	/* default encap to use for each host */
	int	cur_tx,		/* buffer used by current transmit, or -1 */
		next_tx,	/* buffer where a packet is ready to send */
		cur_rx;		/* current receive buffer */
	int	lastload_dest,	/* can last loaded packet be acked? */
		lasttrans_dest;	/* can last TX'd packet be acked? */
	int	timed_out;	/* need to process TX timeout and drop packet */
	unsigned long last_timeout;	/* time of last reported timeout */
	char *card_name;	/* card ident string */
	int card_flags;		/* special card features */

	/* On preemtive and SMB a lock is needed */
	spinlock_t lock;

	struct led_trigger *tx_led_trig;
	char tx_led_trig_name[ARCNET_LED_NAME_SZ];
	struct led_trigger *recon_led_trig;
	char recon_led_trig_name[ARCNET_LED_NAME_SZ];

	struct timer_list	timer;

	struct net_device *dev;
	int reply_status;
	struct tasklet_struct reply_tasklet;

	/*
	 * Buffer management: an ARCnet card has 4 x 512-byte buffers, each of
	 * which can be used for either sending or receiving.  The new dynamic
	 * buffer management routines use a simple circular queue of available
	 * buffers, and take them as they're needed.  This way, we simplify
	 * situations in which we (for example) want to pre-load a transmit
	 * buffer, or start receiving while we copy a received packet to
	 * memory.
	 *
	 * The rules: only the interrupt handler is allowed to _add_ buffers to
	 * the queue; thus, this doesn't require a lock.  Both the interrupt
	 * handler and the transmit function will want to _remove_ buffers, so
	 * we need to handle the situation where they try to do it at the same
	 * time.
	 *
	 * If next_buf == first_free_buf, the queue is empty.  Since there are
	 * only four possible buffers, the queue should never be full.
	 */
	atomic_t buf_lock;
	int buf_queue[5];
	int next_buf, first_free_buf;

	/* network "reconfiguration" handling */
	unsigned long first_recon; /* time of "first" RECON message to count */
	unsigned long last_recon;  /* time of most recent RECON */
	int num_recons;		/* number of RECONs between first and last. */
	int network_down;	/* do we think the network is down? */

	int excnak_pending;    /* We just got an excesive nak interrupt */

	/* RESET flag handling */
	int reset_in_progress;
	struct work_struct reset_work;

	struct {
		uint16_t sequence;	/* sequence number (incs with each packet) */
		__be16 aborted_seq;

		struct Incoming incoming[256];	/* one from each address */
	} rfc1201;

	/* really only used by rfc1201, but we'll pretend it's not */
	struct Outgoing outgoing;	/* packet currently being sent */

	/* hardware-specific functions */
	struct {
		struct module *owner;
		void (*command)(struct net_device *dev, int cmd);
		int (*status)(struct net_device *dev);
		void (*intmask)(struct net_device *dev, int mask);
		int (*reset)(struct net_device *dev, int really_reset);
		void (*open)(struct net_device *dev);
		void (*close)(struct net_device *dev);
		void (*datatrigger) (struct net_device * dev, int enable);
		void (*recontrigger) (struct net_device * dev, int enable);

		void (*copy_to_card)(struct net_device *dev, int bufnum,
				     int offset, void *buf, int count);
		void (*copy_from_card)(struct net_device *dev, int bufnum,
				       int offset, void *buf, int count);
	} hw;

	void __iomem *mem_start;	/* pointer to ioremap'ed MMIO */
};

enum arcnet_led_event {
	ARCNET_LED_EVENT_RECON,
	ARCNET_LED_EVENT_OPEN,
	ARCNET_LED_EVENT_STOP,
	ARCNET_LED_EVENT_TX,
};

void arcnet_led_event(struct net_device *netdev, enum arcnet_led_event event);
void devm_arcnet_led_init(struct net_device *netdev, int index, int subid);

#if ARCNET_DEBUG_MAX & D_SKB
void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc);
#else
static inline
void arcnet_dump_skb(struct net_device *dev, struct sk_buff *skb, char *desc)
{
}
#endif

void arcnet_unregister_proto(struct ArcProto *proto);
irqreturn_t arcnet_interrupt(int irq, void *dev_id);

struct net_device *alloc_arcdev(const char *name);
void free_arcdev(struct net_device *dev);

int arcnet_open(struct net_device *dev);
int arcnet_close(struct net_device *dev);
netdev_tx_t arcnet_send_packet(struct sk_buff *skb,
			       struct net_device *dev);
void arcnet_timeout(struct net_device *dev, unsigned int txqueue);

static inline void arcnet_set_addr(struct net_device *dev, u8 addr)
{
	dev_addr_set(dev, &addr);
}

/* I/O equivalents */

#ifdef CONFIG_SA1100_CT6001
#define BUS_ALIGN  2  /* 8 bit device on a 16 bit bus - needs padding */
#else
#define BUS_ALIGN  1
#endif

/* addr and offset allow register like names to define the actual IO  address.
 * A configuration option multiplies the offset for alignment.
 */
#define arcnet_inb(addr, offset)					\
	inb((addr) + BUS_ALIGN * (offset))
#define arcnet_outb(value, addr, offset)				\
	outb(value, (addr) + BUS_ALIGN * (offset))

#define arcnet_insb(addr, offset, buffer, count)			\
	insb((addr) + BUS_ALIGN * (offset), buffer, count)
#define arcnet_outsb(addr, offset, buffer, count)			\
	outsb((addr) + BUS_ALIGN * (offset), buffer, count)

#define arcnet_readb(addr, offset)					\
	readb((addr) + (offset))
#define arcnet_writeb(value, addr, offset)				\
	writeb(value, (addr) + (offset))

#endif				/* __KERNEL__ */
#endif				/* _LINUX_ARCDEVICE_H */