path: root/drivers/gpu/drm/i915/intel_opregion.c

/*
 * Copyright 2008 Intel Corporation <hong.liu@intel.com>
 * Copyright 2008 Red Hat <mjg@redhat.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sub license, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial
 * portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NON-INFRINGEMENT.  IN NO EVENT SHALL INTEL AND/OR ITS SUPPLIERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/acpi.h>
#include <linux/acpi_io.h>
#include <acpi/video.h>

#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "intel_drv.h"

#define PCI_ASLE		0xe4
#define PCI_ASLS		0xfc
#define PCI_SWSCI		0xe8
#define PCI_SWSCI_SCISEL	(1 << 15)
#define PCI_SWSCI_GSSCIE	(1 << 0)

#define OPREGION_HEADER_OFFSET 0
#define OPREGION_ACPI_OFFSET   0x100
#define   ACPI_CLID 0x01ac /* current lid state indicator */
#define   ACPI_CDCK 0x01b0 /* current docking state indicator */
#define OPREGION_SWSCI_OFFSET  0x200
#define OPREGION_ASLE_OFFSET   0x300
#define OPREGION_VBT_OFFSET    0x400

#define OPREGION_SIGNATURE "IntelGraphicsMem"
#define MBOX_ACPI      (1<<0)
#define MBOX_SWSCI     (1<<1)
#define MBOX_ASLE      (1<<2)

struct opregion_header {
	u8 signature[16];
	u32 size;
	u32 opregion_ver;
	u8 bios_ver[32];
	u8 vbios_ver[16];
	u8 driver_ver[16];
	u32 mboxes;
	u8 reserved[164];
} __attribute__((packed));

/* OpRegion mailbox #1: public ACPI methods */
struct opregion_acpi {
	u32 drdy;       /* driver readiness */
	u32 csts;       /* notification status */
	u32 cevt;       /* current event */
	u8 rsvd1[20];
	u32 didl[8];    /* supported display devices ID list */
	u32 cpdl[8];    /* currently presented display list */
	u32 cadl[8];    /* currently active display list */
	u32 nadl[8];    /* next active devices list */
	u32 aslp;       /* ASL sleep time-out */
	u32 tidx;       /* toggle table index */
	u32 chpd;       /* current hotplug enable indicator */
	u32 clid;       /* current lid state*/
	u32 cdck;       /* current docking state */
	u32 sxsw;       /* Sx state resume */
	u32 evts;       /* ASL supported events */
	u32 cnot;       /* current OS notification */
	u32 nrdy;       /* driver status */
	u8 rsvd2[60];
} __attribute__((packed));

/* OpRegion mailbox #2: SWSCI */
struct opregion_swsci {
	u32 scic;       /* SWSCI command|status|data */
	u32 parm;       /* command parameters */
	u32 dslp;       /* driver sleep time-out */
	u8 rsvd[244];
} __attribute__((packed));

/* OpRegion mailbox #3: ASLE */
struct opregion_asle {
	u32 ardy;       /* driver readiness */
	u32 aslc;       /* ASLE interrupt command */
	u32 tche;       /* technology enabled indicator */
	u32 alsi;       /* current ALS illuminance reading */
	u32 bclp;       /* backlight brightness to set */
	u32 pfit;       /* panel fitting state */
	u32 cblv;       /* current brightness level */
	u16 bclm[20];   /* backlight level duty cycle mapping table */
	u32 cpfm;       /* current panel fitting mode */
	u32 epfm;       /* enabled panel fitting modes */
	u8 plut[74];    /* panel LUT and identifier */
	u32 pfmb;       /* PWM freq and min brightness */
	u32 cddv;       /* color correction default values */
	u32 pcft;       /* power conservation features */
	u32 srot;       /* supported rotation angles */
	u32 iuer;       /* IUER events */
	u8 rsvd[86];
} __attribute__((packed));

/* Driver readiness indicator */
#define ASLE_ARDY_READY		(1 << 0)
#define ASLE_ARDY_NOT_READY	(0 << 0)

/* ASLE Interrupt Command (ASLC) bits */
#define ASLC_SET_ALS_ILLUM		(1 << 0)
#define ASLC_SET_BACKLIGHT		(1 << 1)
#define ASLC_SET_PFIT			(1 << 2)
#define ASLC_SET_PWM_FREQ		(1 << 3)
#define ASLC_SUPPORTED_ROTATION_ANGLES	(1 << 4)
#define ASLC_BUTTON_ARRAY		(1 << 5)
#define ASLC_CONVERTIBLE_INDICATOR	(1 << 6)
#define ASLC_DOCKING_INDICATOR		(1 << 7)
#define ASLC_ISCT_STATE_CHANGE		(1 << 8)
#define ASLC_REQ_MSK			0x1ff
/* response bits */
#define ASLC_ALS_ILLUM_FAILED		(1 << 10)
#define ASLC_BACKLIGHT_FAILED		(1 << 12)
#define ASLC_PFIT_FAILED		(1 << 14)
#define ASLC_PWM_FREQ_FAILED		(1 << 16)
#define ASLC_ROTATION_ANGLES_FAILED	(1 << 18)
#define ASLC_BUTTON_ARRAY_FAILED	(1 << 20)
#define ASLC_CONVERTIBLE_FAILED		(1 << 22)
#define ASLC_DOCKING_FAILED		(1 << 24)
#define ASLC_ISCT_STATE_FAILED		(1 << 26)

/* Technology enabled indicator */
#define ASLE_TCHE_ALS_EN	(1 << 0)
#define ASLE_TCHE_BLC_EN	(1 << 1)
#define ASLE_TCHE_PFIT_EN	(1 << 2)
#define ASLE_TCHE_PFMB_EN	(1 << 3)

/* ASLE backlight brightness to set */
#define ASLE_BCLP_VALID                (1<<31)
#define ASLE_BCLP_MSK          (~(1<<31))

/* ASLE panel fitting request */
#define ASLE_PFIT_VALID         (1<<31)
#define ASLE_PFIT_CENTER (1<<0)
#define ASLE_PFIT_STRETCH_TEXT (1<<1)
#define ASLE_PFIT_STRETCH_GFX (1<<2)

/* PWM frequency and minimum brightness */
#define ASLE_PFMB_BRIGHTNESS_MASK (0xff)
#define ASLE_PFMB_BRIGHTNESS_VALID (1<<8)
#define ASLE_PFMB_PWM_MASK (0x7ffffe00)
#define ASLE_PFMB_PWM_VALID (1<<31)

#define ASLE_CBLV_VALID         (1<<31)

/* IUER */
#define ASLE_IUER_DOCKING		(1 << 7)
#define ASLE_IUER_CONVERTIBLE		(1 << 6)
#define ASLE_IUER_ROTATION_LOCK_BTN	(1 << 4)
#define ASLE_IUER_VOLUME_DOWN_BTN	(1 << 3)
#define ASLE_IUER_VOLUME_UP_BTN		(1 << 2)
#define ASLE_IUER_WINDOWS_BTN		(1 << 1)
#define ASLE_IUER_POWER_BTN		(1 << 0)

/* Software System Control Interrupt (SWSCI) */
#define SWSCI_SCIC_INDICATOR		(1 << 0)
#define SWSCI_SCIC_MAIN_FUNCTION_SHIFT	1
#define SWSCI_SCIC_MAIN_FUNCTION_MASK	(0xf << 1)
#define SWSCI_SCIC_SUB_FUNCTION_SHIFT	8
#define SWSCI_SCIC_SUB_FUNCTION_MASK	(0xff << 8)
#define SWSCI_SCIC_EXIT_PARAMETER_SHIFT	8
#define SWSCI_SCIC_EXIT_PARAMETER_MASK	(0xff << 8)
#define SWSCI_SCIC_EXIT_STATUS_SHIFT	5
#define SWSCI_SCIC_EXIT_STATUS_MASK	(7 << 5)
#define SWSCI_SCIC_EXIT_STATUS_SUCCESS	1

#define SWSCI_FUNCTION_CODE(main, sub) \
	((main) << SWSCI_SCIC_MAIN_FUNCTION_SHIFT | \
	 (sub) << SWSCI_SCIC_SUB_FUNCTION_SHIFT)

/* SWSCI: Get BIOS Data (GBDA) */
#define SWSCI_GBDA			4
#define SWSCI_GBDA_SUPPORTED_CALLS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 0)
#define SWSCI_GBDA_REQUESTED_CALLBACKS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 1)
#define SWSCI_GBDA_BOOT_DISPLAY_PREF	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 4)
#define SWSCI_GBDA_PANEL_DETAILS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 5)
#define SWSCI_GBDA_TV_STANDARD		SWSCI_FUNCTION_CODE(SWSCI_GBDA, 6)
#define SWSCI_GBDA_INTERNAL_GRAPHICS	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 7)
#define SWSCI_GBDA_SPREAD_SPECTRUM	SWSCI_FUNCTION_CODE(SWSCI_GBDA, 10)

/* SWSCI: System BIOS Callbacks (SBCB) */
#define SWSCI_SBCB			6
#define SWSCI_SBCB_SUPPORTED_CALLBACKS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 0)
#define SWSCI_SBCB_INIT_COMPLETION	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 1)
#define SWSCI_SBCB_PRE_HIRES_SET_MODE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 3)
#define SWSCI_SBCB_POST_HIRES_SET_MODE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 4)
#define SWSCI_SBCB_DISPLAY_SWITCH	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 5)
#define SWSCI_SBCB_SET_TV_FORMAT	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 6)
#define SWSCI_SBCB_ADAPTER_POWER_STATE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 7)
#define SWSCI_SBCB_DISPLAY_POWER_STATE	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 8)
#define SWSCI_SBCB_SET_BOOT_DISPLAY	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 9)
#define SWSCI_SBCB_SET_PANEL_DETAILS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 10)
#define SWSCI_SBCB_SET_INTERNAL_GFX	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 11)
#define SWSCI_SBCB_POST_HIRES_TO_DOS_FS	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 16)
#define SWSCI_SBCB_SUSPEND_RESUME	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 17)
#define SWSCI_SBCB_SET_SPREAD_SPECTRUM	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 18)
#define SWSCI_SBCB_POST_VBE_PM		SWSCI_FUNCTION_CODE(SWSCI_SBCB, 19)
#define SWSCI_SBCB_ENABLE_DISABLE_AUDIO	SWSCI_FUNCTION_CODE(SWSCI_SBCB, 21)

#define ACPI_OTHER_OUTPUT (0<<8)
#define ACPI_VGA_OUTPUT (1<<8)
#define ACPI_TV_OUTPUT (2<<8)
#define ACPI_DIGITAL_OUTPUT (3<<8)
#define ACPI_LVDS_OUTPUT (4<<8)

#ifdef CONFIG_ACPI
static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct opregion_swsci __iomem *swsci = dev_priv->opregion.swsci;
	u32 main_function, sub_function, scic;
	u16 pci_swsci;
	u32 dslp;

	if (!swsci)
		return -ENODEV;

	main_function = (function & SWSCI_SCIC_MAIN_FUNCTION_MASK) >>
		SWSCI_SCIC_MAIN_FUNCTION_SHIFT;
	sub_function = (function & SWSCI_SCIC_SUB_FUNCTION_MASK) >>
		SWSCI_SCIC_SUB_FUNCTION_SHIFT;

	/* Check if we can call the function. See swsci_setup for details. */
	if (main_function == SWSCI_SBCB) {
		if ((dev_priv->opregion.swsci_sbcb_sub_functions &
		     (1 << sub_function)) == 0)
			return -EINVAL;
	} else if (main_function == SWSCI_GBDA) {
		if ((dev_priv->opregion.swsci_gbda_sub_functions &
		     (1 << sub_function)) == 0)
			return -EINVAL;
	}

	/* Driver sleep timeout in ms. */
	dslp = ioread32(&swsci->dslp);
	if (!dslp) {
		/* The spec says 2ms should be the default, but it's too small
		 * for some machines. */
		dslp = 50;
	} else if (dslp > 500) {
		/* Hey bios, trust must be earned. */
		WARN_ONCE(1, "excessive driver sleep timeout (DSPL) %u\n", dslp);
		dslp = 500;
	}

	/* The spec tells us to do this, but we are the only user... */
	scic = ioread32(&swsci->scic);
	if (scic & SWSCI_SCIC_INDICATOR) {
		DRM_DEBUG_DRIVER("SWSCI request already in progress\n");
		return -EBUSY;
	}

	scic = function | SWSCI_SCIC_INDICATOR;

	iowrite32(parm, &swsci->parm);
	iowrite32(scic, &swsci->scic);

	/* Ensure SCI event is selected and event trigger is cleared. */
	pci_read_config_word(dev->pdev, PCI_SWSCI, &pci_swsci);
	if (!(pci_swsci & PCI_SWSCI_SCISEL) || (pci_swsci & PCI_SWSCI_GSSCIE)) {
		pci_swsci |= PCI_SWSCI_SCISEL;
		pci_swsci &= ~PCI_SWSCI_GSSCIE;
		pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);
	}

	/* Use event trigger to tell bios to check the mail. */
	pci_swsci |= PCI_SWSCI_GSSCIE;
	pci_write_config_word(dev->pdev, PCI_SWSCI, pci_swsci);

	/* Poll for the result. */
#define C (((scic = ioread32(&swsci->scic)) & SWSCI_SCIC_INDICATOR) == 0)
	if (wait_for(C, dslp)) {
		DRM_DEBUG_DRIVER("SWSCI request timed out\n");
		return -ETIMEDOUT;
	}

	scic = (scic & SWSCI_SCIC_EXIT_STATUS_MASK) >>
		SWSCI_SCIC_EXIT_STATUS_SHIFT;

	/* Note: scic == 0 is an error! */
	if (scic != SWSCI_SCIC_EXIT_STATUS_SUCCESS) {
		DRM_DEBUG_DRIVER("SWSCI request error %u\n", scic);
		return -EIO;
	}

	if (parm_out)
		*parm_out = ioread32(&swsci->parm);

	return 0;

#undef C
}

#define DISPLAY_TYPE_CRT			0
#define DISPLAY_TYPE_TV				1
#define DISPLAY_TYPE_EXTERNAL_FLAT_PANEL	2
#define DISPLAY_TYPE_INTERNAL_FLAT_PANEL	3

int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
				  bool enable)
{
	struct drm_device *dev = intel_encoder->base.dev;
	u32 parm = 0;
	u32 type = 0;
	u32 port;

	/* don't care about old stuff for now */
	if (!HAS_DDI(dev))
		return 0;

	port = intel_ddi_get_encoder_port(intel_encoder);
	if (port == PORT_E) {
		port = 0;
	} else {
		parm |= 1 << port;
		port++;
	}

	if (!enable)
		parm |= 4 << 8;

	switch (intel_encoder->type) {
	case INTEL_OUTPUT_ANALOG:
		type = DISPLAY_TYPE_CRT;
		break;
	case INTEL_OUTPUT_UNKNOWN:
	case INTEL_OUTPUT_DISPLAYPORT:
	case INTEL_OUTPUT_HDMI:
		type = DISPLAY_TYPE_EXTERNAL_FLAT_PANEL;
		break;
	case INTEL_OUTPUT_EDP:
		type = DISPLAY_TYPE_INTERNAL_FLAT_PANEL;
		break;
	default:
		WARN_ONCE(1, "unsupported intel_encoder type %d\n",
			  intel_encoder->type);
		return -EINVAL;
	}

	parm |= type << (16 + port * 3);

	return swsci(dev, SWSCI_SBCB_DISPLAY_POWER_STATE, parm, NULL);
}

static const struct {
	pci_power_t pci_power_state;
	u32 parm;
} power_state_map[] = {
	{ PCI_D0,	0x00 },
	{ PCI_D1,	0x01 },
	{ PCI_D2,	0x02 },
	{ PCI_D3hot,	0x04 },
	{ PCI_D3cold,	0x04 },
};

int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state)
{
	int i;

	if (!HAS_DDI(dev))
		return 0;

	for (i = 0; i < ARRAY_SIZE(power_state_map); i++) {
		if (state == power_state_map[i].pci_power_state)
			return swsci(dev, SWSCI_SBCB_ADAPTER_POWER_STATE,
				     power_state_map[i].parm, NULL);
	}

	return -EINVAL;
}

static u32 asle_set_backlight(struct drm_device *dev, u32 bclp)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct drm_encoder *encoder;
	struct drm_connector *connector;
	struct intel_connector *intel_connector = NULL;
	struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[0];
	struct opregion_asle __iomem *asle = dev_priv->opregion.asle;
	u32 ret = 0;
	bool found = false;

	DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp);

	if (!(bclp & ASLE_BCLP_VALID))
		return ASLC_BACKLIGHT_FAILED;

	bclp &= ASLE_BCLP_MSK;
	if (bclp > 255)
		return ASLC_BACKLIGHT_FAILED;

	mutex_lock(&dev->mode_config.mutex);
	/*
	 * Could match the OpRegion connector here instead, but we'd also need
	 * to verify the connector could handle a backlight call.
	 */
	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
		if (encoder->crtc == crtc) {
			found = true;
			break;
		}

	if (!found) {
		ret = ASLC_BACKLIGHT_FAILED;
		goto out;
	}

	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
		if (connector->encoder == encoder)
			intel_connector = to_intel_connector(connector);

	if (!intel_connector) {
		ret = ASLC_BACKLIGHT_FAILED;
		goto out;
	}

	DRM_DEBUG_KMS("updating opregion backlight %d/255\n", bclp);
	intel_panel_set_backlight(intel_connector, bclp, 255);
	iowrite32(DIV_ROUND_UP(bclp * 100, 255) | ASLE_CBLV_VALID, &asle->cblv);

out:
	mutex_unlock(&dev->mode_config.mutex);

	return ret;
}

static u32 asle_set_als_illum(struct drm_device *dev, u32 alsi)
{
	/* alsi is the current ALS reading in lux. 0 indicates below sensor
	   range, 0xffff indicates above sensor range. 1-0xfffe are valid */
	DRM_DEBUG_DRIVER("Illum is not supported\n");
	return ASLC_ALS_ILLUM_FAILED;
}

static u32 asle_set_pwm_freq(struct drm_device *dev, u32 pfmb)
{
	DRM_DEBUG_DRIVER("PWM freq is not supported\n");
	return ASLC_PWM_FREQ_FAILED;
}

static u32 asle_set_pfit(struct drm_device *dev, u32 pfit)
{
	/* Panel fitting is currently controlled by the X code, so this is a
	   noop until modesetting support works fully */
	DRM_DEBUG_DRIVER("Pfit is not supported\n");
	return ASLC_PFIT_FAILED;
}

static u32 asle_set_supported_rotation_angles(struct drm_device *dev, u32 srot)
{
	DRM_DEBUG_DRIVER("SROT is not supported\n");
	return ASLC_ROTATION_ANGLES_FAILED;
}

static u32 asle_set_button_array(struct drm_device *dev, u32 iuer)
{
	if (!iuer)
		DRM_DEBUG_DRIVER("Button array event is not supported (nothing)\n");
	if (iuer & ASLE_IUER_ROTATION_LOCK_BTN)
		DRM_DEBUG_DRIVER("Button array event is not supported (rotation lock)\n");
	if (iuer & ASLE_IUER_VOLUME_DOWN_BTN)
		DRM_DEBUG_DRIVER("Button array event is not supported (volume down)\n");
	if (iuer & ASLE_IUER_VOLUME_UP_BTN)
		DRM_DEBUG_DRIVER("Button array event is not supported (volume up)\n");
	if (iuer & ASLE_IUER_WINDOWS_BTN)
		DRM_DEBUG_DRIVER("Button array event is not supported (windows)\n");
	if (iuer & ASLE_IUER_POWER_BTN)
		DRM_DEBUG_DRIVER("Button array event is not supported (power)\n");

	return ASLC_BUTTON_ARRAY_FAILED;
}

static u32 asle_set_convertible(struct drm_device *dev, u32 iuer)
{
	if (iuer & ASLE_IUER_CONVERTIBLE)
		DRM_DEBUG_DRIVER("Convertible is not supported (clamshell)\n");
	else
		DRM_DEBUG_DRIVER("Convertible is not supported (slate)\n");

	return ASLC_CONVERTIBLE_FAILED;
}

static u32 asle_set_docking(struct drm_device *dev, u32 iuer)
{
	if (iuer & ASLE_IUER_DOCKING)
		DRM_DEBUG_DRIVER("Docking is not supported (docked)\n");
	else
		DRM_DEBUG_DRIVER("Docking is not supported (undocked)\n");

	return ASLC_DOCKING_FAILED;
}

static u32 asle_isct_state(struct drm_device *dev)
{
	DRM_DEBUG_DRIVER("ISCT is not supported\n");
	return ASLC_ISCT_STATE_FAILED;
}

static void asle_work(struct work_struct *work)
{
	struct intel_opregion *opregion =
		container_of(work, struct intel_opregion, asle_work);
	struct drm_i915_private *dev_priv =
		container_of(opregion, struct drm_i915_private, opregion);
	struct drm_device *dev = dev_priv->dev;
	struct opregion_asle __iomem *asle = dev_priv->opregion.asle;
	u32 aslc_stat = 0;
	u32 aslc_req;

	if (!asle)
		return;

	aslc_req = ioread32(&asle->aslc);

	if (!(aslc_req & ASLC_REQ_MSK)) {
		DRM_DEBUG_DRIVER("No request on ASLC interrupt 0x%08x\n",
				 aslc_req);
		return;
	}

	if (aslc_req & ASLC_SET_ALS_ILLUM)
		aslc_stat |= asle_set_als_illum(dev, ioread32(&asle->alsi));

	if (aslc_req & ASLC_SET_BACKLIGHT)
		aslc_stat |= asle_set_backlight(dev, ioread32(&asle->bclp));

	if (aslc_req & ASLC_SET_PFIT)
		aslc_stat |= asle_set_pfit(dev, ioread32(&asle->pfit));

	if (aslc_req & ASLC_SET_PWM_FREQ)
		aslc_stat |= asle_set_pwm_freq(dev, ioread32(&asle->pfmb));

	if (aslc_req & ASLC_SUPPORTED_ROTATION_ANGLES)
		aslc_stat |= asle_set_supported_rotation_angles(dev,
							ioread32(&asle->srot));

	if (aslc_req & ASLC_BUTTON_ARRAY)
		aslc_stat |= asle_set_button_array(dev, ioread32(&asle->iuer));

	if (aslc_req & ASLC_CONVERTIBLE_INDICATOR)
		aslc_stat |= asle_set_convertible(dev, ioread32(&asle->iuer));

	if (aslc_req & ASLC_DOCKING_INDICATOR)
		aslc_stat |= asle_set_docking(dev, ioread32(&asle->iuer));

	if (aslc_req & ASLC_ISCT_STATE_CHANGE)
		aslc_stat |= asle_isct_state(dev);

	iowrite32(aslc_stat, &asle->aslc);
}

void intel_opregion_asle_intr(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;

	if (dev_priv->opregion.asle)
		schedule_work(&dev_priv->opregion.asle_work);
}

#define ACPI_EV_DISPLAY_SWITCH (1<<0)
#define ACPI_EV_LID            (1<<1)
#define ACPI_EV_DOCK           (1<<2)

static struct intel_opregion *system_opregion;

static int intel_opregion_video_event(struct notifier_block *nb,
				      unsigned long val, void *data)
{
	/* The only video events relevant to opregion are 0x80. These indicate
	   either a docking event, lid switch or display switch request. In
	   Linux, these are handled by the dock, button and video drivers.
	*/

	struct opregion_acpi __iomem *acpi;
	struct acpi_bus_event *event = data;
	int ret = NOTIFY_OK;

	if (strcmp(event->device_class, ACPI_VIDEO_CLASS) != 0)
		return NOTIFY_DONE;

	if (!system_opregion)
		return NOTIFY_DONE;

	acpi = system_opregion->acpi;

	if (event->type == 0x80 &&
	    (ioread32(&acpi->cevt) & 1) == 0)
		ret = NOTIFY_BAD;

	iowrite32(0, &acpi->csts);

	return ret;
}

static struct notifier_block intel_opregion_notifier = {
	.notifier_call = intel_opregion_video_event,
};

/*
 * Initialise the DIDL field in opregion. This passes a list of devices to
 * the firmware. Values are defined by section B.4.2 of the ACPI specification
 * (version 3)
 */

static void intel_didl_outputs(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;
	struct drm_connector *connector;
	acpi_handle handle;
	struct acpi_device *acpi_dev, *acpi_cdev, *acpi_video_bus = NULL;
	unsigned long long device_id;
	acpi_status status;
	u32 temp;
	int i = 0;

	handle = DEVICE_ACPI_HANDLE(&dev->pdev->dev);
	if (!handle || acpi_bus_get_device(handle, &acpi_dev))
		return;

	if (acpi_is_video_device(handle))
		acpi_video_bus = acpi_dev;
	else {
		list_for_each_entry(acpi_cdev, &acpi_dev->children, node) {
			if (acpi_is_video_device(acpi_cdev->handle)) {
				acpi_video_bus = acpi_cdev;
				break;
			}
		}
	}

	if (!acpi_video_bus) {
		pr_warn("No ACPI video bus found\n");
		return;
	}

	list_for_each_entry(acpi_cdev, &acpi_video_bus->children, node) {
		if (i >= 8) {
			dev_dbg(&dev->pdev->dev,
				"More than 8 outputs detected via ACPI\n");
			return;
		}
		status =
			acpi_evaluate_integer(acpi_cdev->handle, "_ADR",
						NULL, &device_id);
		if (ACPI_SUCCESS(status)) {
			if (!device_id)
				goto blind_set;
			iowrite32((u32)(device_id & 0x0f0f),
				  &opregion->acpi->didl[i]);
			i++;
		}
	}

end:
	/* If fewer than 8 outputs, the list must be null terminated */
	if (i < 8)
		iowrite32(0, &opregion->acpi->didl[i]);
	return;

blind_set:
	i = 0;
	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
		int output_type = ACPI_OTHER_OUTPUT;
		if (i >= 8) {
			dev_dbg(&dev->pdev->dev,
				"More than 8 outputs in connector list\n");
			return;
		}
		switch (connector->connector_type) {
		case DRM_MODE_CONNECTOR_VGA:
		case DRM_MODE_CONNECTOR_DVIA:
			output_type = ACPI_VGA_OUTPUT;
			break;
		case DRM_MODE_CONNECTOR_Composite:
		case DRM_MODE_CONNECTOR_SVIDEO:
		case DRM_MODE_CONNECTOR_Component:
		case DRM_MODE_CONNECTOR_9PinDIN:
			output_type = ACPI_TV_OUTPUT;
			break;
		case DRM_MODE_CONNECTOR_DVII:
		case DRM_MODE_CONNECTOR_DVID:
		case DRM_MODE_CONNECTOR_DisplayPort:
		case DRM_MODE_CONNECTOR_HDMIA:
		case DRM_MODE_CONNECTOR_HDMIB:
			output_type = ACPI_DIGITAL_OUTPUT;
			break;
		case DRM_MODE_CONNECTOR_LVDS:
			output_type = ACPI_LVDS_OUTPUT;
			break;
		}
		temp = ioread32(&opregion->acpi->didl[i]);
		iowrite32(temp | (1<<31) | output_type | i,
			  &opregion->acpi->didl[i]);
		i++;
	}
	goto end;
}

static void intel_setup_cadls(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;
	int i = 0;
	u32 disp_id;

	/* Initialize the CADL field by duplicating the DIDL values.
	 * Technically, this is not always correct as display outputs may exist,
	 * but not active. This initialization is necessary for some Clevo
	 * laptops that check this field before processing the brightness and
	 * display switching hotkeys. Just like DIDL, CADL is NULL-terminated if
	 * there are less than eight devices. */
	do {
		disp_id = ioread32(&opregion->acpi->didl[i]);
		iowrite32(disp_id, &opregion->acpi->cadl[i]);
	} while (++i < 8 && disp_id != 0);
}

void intel_opregion_init(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;

	if (!opregion->header)
		return;

	if (opregion->acpi) {
		if (drm_core_check_feature(dev, DRIVER_MODESET)) {
			intel_didl_outputs(dev);
			intel_setup_cadls(dev);
		}

		/* Notify BIOS we are ready to handle ACPI video ext notifs.
		 * Right now, all the events are handled by the ACPI video module.
		 * We don't actually need to do anything with them. */
		iowrite32(0, &opregion->acpi->csts);
		iowrite32(1, &opregion->acpi->drdy);

		system_opregion = opregion;
		register_acpi_notifier(&intel_opregion_notifier);
	}

	if (opregion->asle) {
		iowrite32(ASLE_TCHE_BLC_EN, &opregion->asle->tche);
		iowrite32(ASLE_ARDY_READY, &opregion->asle->ardy);
	}
}

void intel_opregion_fini(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;

	if (!opregion->header)
		return;

	if (opregion->asle)
		iowrite32(ASLE_ARDY_NOT_READY, &opregion->asle->ardy);

	cancel_work_sync(&dev_priv->opregion.asle_work);

	if (opregion->acpi) {
		iowrite32(0, &opregion->acpi->drdy);

		system_opregion = NULL;
		unregister_acpi_notifier(&intel_opregion_notifier);
	}

	/* just clear all opregion memory pointers now */
	iounmap(opregion->header);
	opregion->header = NULL;
	opregion->acpi = NULL;
	opregion->swsci = NULL;
	opregion->asle = NULL;
	opregion->vbt = NULL;
	opregion->lid_state = NULL;
}

static void swsci_setup(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;
	bool requested_callbacks = false;
	u32 tmp;

	/* Sub-function code 0 is okay, let's allow them. */
	opregion->swsci_gbda_sub_functions = 1;
	opregion->swsci_sbcb_sub_functions = 1;

	/* We use GBDA to ask for supported GBDA calls. */
	if (swsci(dev, SWSCI_GBDA_SUPPORTED_CALLS, 0, &tmp) == 0) {
		/* make the bits match the sub-function codes */
		tmp <<= 1;
		opregion->swsci_gbda_sub_functions |= tmp;
	}

	/*
	 * We also use GBDA to ask for _requested_ SBCB callbacks. The driver
	 * must not call interfaces that are not specifically requested by the
	 * bios.
	 */
	if (swsci(dev, SWSCI_GBDA_REQUESTED_CALLBACKS, 0, &tmp) == 0) {
		/* here, the bits already match sub-function codes */
		opregion->swsci_sbcb_sub_functions |= tmp;
		requested_callbacks = true;
	}

	/*
	 * But we use SBCB to ask for _supported_ SBCB calls. This does not mean
	 * the callback is _requested_. But we still can't call interfaces that
	 * are not requested.
	 */
	if (swsci(dev, SWSCI_SBCB_SUPPORTED_CALLBACKS, 0, &tmp) == 0) {
		/* make the bits match the sub-function codes */
		u32 low = tmp & 0x7ff;
		u32 high = tmp & ~0xfff; /* bit 11 is reserved */
		tmp = (high << 4) | (low << 1) | 1;

		/* best guess what to do with supported wrt requested */
		if (requested_callbacks) {
			u32 req = opregion->swsci_sbcb_sub_functions;
			if ((req & tmp) != req)
				DRM_DEBUG_DRIVER("SWSCI BIOS requested (%08x) SBCB callbacks that are not supported (%08x)\n", req, tmp);
			/* XXX: for now, trust the requested callbacks */
			/* opregion->swsci_sbcb_sub_functions &= tmp; */
		} else {
			opregion->swsci_sbcb_sub_functions |= tmp;
		}
	}

	DRM_DEBUG_DRIVER("SWSCI GBDA callbacks %08x, SBCB callbacks %08x\n",
			 opregion->swsci_gbda_sub_functions,
			 opregion->swsci_sbcb_sub_functions);
}
#else /* CONFIG_ACPI */
static inline void swsci_setup(struct drm_device *dev) {}
#endif  /* CONFIG_ACPI */

int intel_opregion_setup(struct drm_device *dev)
{
	struct drm_i915_private *dev_priv = dev->dev_private;
	struct intel_opregion *opregion = &dev_priv->opregion;
	void __iomem *base;
	u32 asls, mboxes;
	char buf[sizeof(OPREGION_SIGNATURE)];
	int err = 0;

	pci_read_config_dword(dev->pdev, PCI_ASLS, &asls);
	DRM_DEBUG_DRIVER("graphic opregion physical addr: 0x%x\n", asls);
	if (asls == 0) {
		DRM_DEBUG_DRIVER("ACPI OpRegion not supported!\n");
		return -ENOTSUPP;
	}

#ifdef CONFIG_ACPI
	INIT_WORK(&opregion->asle_work, asle_work);
#endif

	base = acpi_os_ioremap(asls, OPREGION_SIZE);
	if (!base)
		return -ENOMEM;

	memcpy_fromio(buf, base, sizeof(buf));

	if (memcmp(buf, OPREGION_SIGNATURE, 16)) {
		DRM_DEBUG_DRIVER("opregion signature mismatch\n");
		err = -EINVAL;
		goto err_out;
	}
	opregion->header = base;
	opregion->vbt = base + OPREGION_VBT_OFFSET;

	opregion->lid_state = base + ACPI_CLID;

	mboxes = ioread32(&opregion->header->mboxes);
	if (mboxes & MBOX_ACPI) {
		DRM_DEBUG_DRIVER("Public ACPI methods supported\n");
		opregion->acpi = base + OPREGION_ACPI_OFFSET;
	}

	if (mboxes & MBOX_SWSCI) {
		DRM_DEBUG_DRIVER("SWSCI supported\n");
		opregion->swsci = base + OPREGION_SWSCI_OFFSET;
		swsci_setup(dev);
	}
	if (mboxes & MBOX_ASLE) {
		DRM_DEBUG_DRIVER("ASLE supported\n");
		opregion->asle = base + OPREGION_ASLE_OFFSET;

		iowrite32(ASLE_ARDY_NOT_READY, &opregion->asle->ardy);
	}

	return 0;

err_out:
	iounmap(base);
	return err;
}