1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2020, Analogix Semiconductor. All rights reserved.
*
*/
#ifndef __ANX7625_H__
#define __ANX7625_H__
#define ANX7625_DRV_VERSION "0.1.04"
/* Loading OCM re-trying times */
#define OCM_LOADING_TIME 10
/********* ANX7625 Register **********/
#define TX_P0_ADDR 0x70
#define TX_P1_ADDR 0x7A
#define TX_P2_ADDR 0x72
#define RX_P0_ADDR 0x7e
#define RX_P1_ADDR 0x84
#define RX_P2_ADDR 0x54
#define RSVD_00_ADDR 0x00
#define RSVD_D1_ADDR 0xD1
#define RSVD_60_ADDR 0x60
#define RSVD_39_ADDR 0x39
#define RSVD_7F_ADDR 0x7F
#define TCPC_INTERFACE_ADDR 0x58
/* Clock frequency in Hz */
#define XTAL_FRQ (27 * 1000000)
#define POST_DIVIDER_MIN 1
#define POST_DIVIDER_MAX 16
#define PLL_OUT_FREQ_MIN 520000000UL
#define PLL_OUT_FREQ_MAX 730000000UL
#define PLL_OUT_FREQ_ABS_MIN 300000000UL
#define PLL_OUT_FREQ_ABS_MAX 800000000UL
#define MAX_UNSIGNED_24BIT 16777215UL
/***************************************************************/
/* Register definition of device address 0x58 */
#define PRODUCT_ID_L 0x02
#define PRODUCT_ID_H 0x03
#define INTR_ALERT_1 0xCC
#define INTR_SOFTWARE_INT BIT(3)
#define INTR_RECEIVED_MSG BIT(5)
#define SYSTEM_STSTUS 0x45
#define INTERFACE_CHANGE_INT 0x44
#define HPD_STATUS_CHANGE 0x80
#define HPD_STATUS 0x80
/******** END of I2C Address 0x58 ********/
/***************************************************************/
/* Register definition of device address 0x70 */
#define I2C_ADDR_70_DPTX 0x70
#define SP_TX_LINK_BW_SET_REG 0xA0
#define SP_TX_LANE_COUNT_SET_REG 0xA1
#define M_VID_0 0xC0
#define M_VID_1 0xC1
#define M_VID_2 0xC2
#define N_VID_0 0xC3
#define N_VID_1 0xC4
#define N_VID_2 0xC5
/***************************************************************/
/* Register definition of device address 0x72 */
#define AUX_RST 0x04
#define RST_CTRL2 0x07
#define SP_TX_TOTAL_LINE_STA_L 0x24
#define SP_TX_TOTAL_LINE_STA_H 0x25
#define SP_TX_ACT_LINE_STA_L 0x26
#define SP_TX_ACT_LINE_STA_H 0x27
#define SP_TX_V_F_PORCH_STA 0x28
#define SP_TX_V_SYNC_STA 0x29
#define SP_TX_V_B_PORCH_STA 0x2A
#define SP_TX_TOTAL_PIXEL_STA_L 0x2B
#define SP_TX_TOTAL_PIXEL_STA_H 0x2C
#define SP_TX_ACT_PIXEL_STA_L 0x2D
#define SP_TX_ACT_PIXEL_STA_H 0x2E
#define SP_TX_H_F_PORCH_STA_L 0x2F
#define SP_TX_H_F_PORCH_STA_H 0x30
#define SP_TX_H_SYNC_STA_L 0x31
#define SP_TX_H_SYNC_STA_H 0x32
#define SP_TX_H_B_PORCH_STA_L 0x33
#define SP_TX_H_B_PORCH_STA_H 0x34
#define SP_TX_VID_CTRL 0x84
#define SP_TX_BPC_MASK 0xE0
#define SP_TX_BPC_6 0x00
#define SP_TX_BPC_8 0x20
#define SP_TX_BPC_10 0x40
#define SP_TX_BPC_12 0x60
#define VIDEO_BIT_MATRIX_12 0x4c
#define AUDIO_CHANNEL_STATUS_1 0xd0
#define AUDIO_CHANNEL_STATUS_2 0xd1
#define AUDIO_CHANNEL_STATUS_3 0xd2
#define AUDIO_CHANNEL_STATUS_4 0xd3
#define AUDIO_CHANNEL_STATUS_5 0xd4
#define AUDIO_CHANNEL_STATUS_6 0xd5
#define TDM_SLAVE_MODE 0x10
#define I2S_SLAVE_MODE 0x08
#define AUDIO_CONTROL_REGISTER 0xe6
#define TDM_TIMING_MODE 0x08
#define I2C_ADDR_72_DPTX 0x72
#define HP_MIN 8
#define HBLANKING_MIN 80
#define SYNC_LEN_DEF 32
#define HFP_HBP_DEF ((HBLANKING_MIN - SYNC_LEN_DEF) / 2)
#define VIDEO_CONTROL_0 0x08
#define ACTIVE_LINES_L 0x14
#define ACTIVE_LINES_H 0x15 /* Bit[7:6] are reserved */
#define VERTICAL_FRONT_PORCH 0x16
#define VERTICAL_SYNC_WIDTH 0x17
#define VERTICAL_BACK_PORCH 0x18
#define HORIZONTAL_TOTAL_PIXELS_L 0x19
#define HORIZONTAL_TOTAL_PIXELS_H 0x1A /* Bit[7:6] are reserved */
#define HORIZONTAL_ACTIVE_PIXELS_L 0x1B
#define HORIZONTAL_ACTIVE_PIXELS_H 0x1C /* Bit[7:6] are reserved */
#define HORIZONTAL_FRONT_PORCH_L 0x1D
#define HORIZONTAL_FRONT_PORCH_H 0x1E /* Bit[7:4] are reserved */
#define HORIZONTAL_SYNC_WIDTH_L 0x1F
#define HORIZONTAL_SYNC_WIDTH_H 0x20 /* Bit[7:4] are reserved */
#define HORIZONTAL_BACK_PORCH_L 0x21
#define HORIZONTAL_BACK_PORCH_H 0x22 /* Bit[7:4] are reserved */
/******** END of I2C Address 0x72 *********/
/***************************************************************/
/* Register definition of device address 0x7e */
#define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
#define FLASH_LOAD_STA 0x05
#define FLASH_LOAD_STA_CHK BIT(7)
#define XTAL_FRQ_SEL 0x3F
/* bit field positions */
#define XTAL_FRQ_SEL_POS 5
/* bit field values */
#define XTAL_FRQ_19M2 (0 << XTAL_FRQ_SEL_POS)
#define XTAL_FRQ_27M (4 << XTAL_FRQ_SEL_POS)
#define R_DSC_CTRL_0 0x40
#define READ_STATUS_EN 7
#define CLK_1MEG_RB 6 /* 1MHz clock reset; 0=reset, 0=reset release */
#define DSC_BIST_DONE 1 /* Bit[5:1]: 1=DSC MBIST pass */
#define DSC_EN 0x01 /* 1=DSC enabled, 0=DSC disabled */
#define OCM_FW_VERSION 0x31
#define OCM_FW_REVERSION 0x32
#define AP_AUX_ADDR_7_0 0x11
#define AP_AUX_ADDR_15_8 0x12
#define AP_AUX_ADDR_19_16 0x13
/* Bit[0:3] AUX status, bit 4 op_en, bit 5 address only */
#define AP_AUX_CTRL_STATUS 0x14
#define AP_AUX_CTRL_OP_EN 0x10
#define AP_AUX_CTRL_ADDRONLY 0x20
#define AP_AUX_BUFF_START 0x15
#define PIXEL_CLOCK_L 0x25
#define PIXEL_CLOCK_H 0x26
#define AP_AUX_COMMAND 0x27 /* com+len */
/* Bit 0&1: 3D video structure */
/* 0x01: frame packing, 0x02:Line alternative, 0x03:Side-by-side(full) */
#define AP_AV_STATUS 0x28
#define AP_VIDEO_CHG BIT(2)
#define AP_AUDIO_CHG BIT(3)
#define AP_MIPI_MUTE BIT(4) /* 1:MIPI input mute, 0: ummute */
#define AP_MIPI_RX_EN BIT(5) /* 1: MIPI RX input in 0: no RX in */
#define AP_DISABLE_PD BIT(6)
#define AP_DISABLE_DISPLAY BIT(7)
/***************************************************************/
/* Register definition of device address 0x84 */
#define MIPI_PHY_CONTROL_3 0x03
#define MIPI_HS_PWD_CLK 7
#define MIPI_HS_RT_CLK 6
#define MIPI_PD_CLK 5
#define MIPI_CLK_RT_MANUAL_PD_EN 4
#define MIPI_CLK_HS_MANUAL_PD_EN 3
#define MIPI_CLK_DET_DET_BYPASS 2
#define MIPI_CLK_MISS_CTRL 1
#define MIPI_PD_LPTX_CH_MANUAL_PD_EN 0
#define MIPI_LANE_CTRL_0 0x05
#define MIPI_TIME_HS_PRPR 0x08
/*
* After MIPI RX protocol layer received video frames,
* Protocol layer starts to reconstruct video stream from PHY
*/
#define MIPI_VIDEO_STABLE_CNT 0x0A
#define MIPI_LANE_CTRL_10 0x0F
#define MIPI_DIGITAL_ADJ_1 0x1B
#define IVO_MID0 0x26
#define IVO_MID1 0xCF
#define MIPI_PLL_M_NUM_23_16 0x1E
#define MIPI_PLL_M_NUM_15_8 0x1F
#define MIPI_PLL_M_NUM_7_0 0x20
#define MIPI_PLL_N_NUM_23_16 0x21
#define MIPI_PLL_N_NUM_15_8 0x22
#define MIPI_PLL_N_NUM_7_0 0x23
#define MIPI_DIGITAL_PLL_6 0x2A
/* Bit[7:6]: VCO band control, only effective */
#define MIPI_M_NUM_READY 0x10
#define MIPI_N_NUM_READY 0x08
#define STABLE_INTEGER_CNT_EN 0x04
#define MIPI_PLL_TEST_BIT 0
/* Bit[1:0]: test point output select - */
/* 00: VCO power, 01: dvdd_pdt, 10: dvdd, 11: vcox */
#define MIPI_DIGITAL_PLL_7 0x2B
#define MIPI_PLL_FORCE_N_EN 7
#define MIPI_PLL_FORCE_BAND_EN 6
#define MIPI_PLL_VCO_TUNE_REG 4
/* Bit[5:4]: VCO metal capacitance - */
/* 00: +20% fast, 01: +10% fast (default), 10: typical, 11: -10% slow */
#define MIPI_PLL_VCO_TUNE_REG_VAL 0x30
#define MIPI_PLL_PLL_LDO_BIT 2
/* Bit[3:2]: vco_v2i power - */
/* 00: 1.40V, 01: 1.45V (default), 10: 1.50V, 11: 1.55V */
#define MIPI_PLL_RESET_N 0x02
#define MIPI_FRQ_FORCE_NDET 0
#define MIPI_ALERT_CLR_0 0x2D
#define HS_link_error_clear 7
/* This bit itself is S/C, and it clears 0x84:0x31[7] */
#define MIPI_ALERT_OUT_0 0x31
#define check_sum_err_hs_sync 7
/* This bit is cleared by 0x84:0x2D[7] */
#define MIPI_DIGITAL_PLL_8 0x33
#define MIPI_POST_DIV_VAL 4
/* N means divided by (n+1), n = 0~15 */
#define MIPI_EN_LOCK_FRZ 3
#define MIPI_FRQ_COUNTER_RST 2
#define MIPI_FRQ_SET_REG_8 1
/* Bit 0 is reserved */
#define MIPI_DIGITAL_PLL_9 0x34
#define MIPI_DIGITAL_PLL_16 0x3B
#define MIPI_FRQ_FREEZE_NDET 7
#define MIPI_FRQ_REG_SET_ENABLE 6
#define MIPI_REG_FORCE_SEL_EN 5
#define MIPI_REG_SEL_DIV_REG 4
#define MIPI_REG_FORCE_PRE_DIV_EN 3
/* Bit 2 is reserved */
#define MIPI_FREF_D_IND 1
#define REF_CLK_27000KHZ 1
#define REF_CLK_19200KHZ 0
#define MIPI_REG_PLL_PLL_TEST_ENABLE 0
#define MIPI_DIGITAL_PLL_18 0x3D
#define FRQ_COUNT_RB_SEL 7
#define REG_FORCE_POST_DIV_EN 6
#define MIPI_DPI_SELECT 5
#define SELECT_DSI 1
#define SELECT_DPI 0
#define REG_BAUD_DIV_RATIO 0
#define H_BLANK_L 0x3E
/* For DSC only */
#define H_BLANK_H 0x3F
/* For DSC only; note: bit[7:6] are reserved */
#define MIPI_SWAP 0x4A
#define MIPI_SWAP_CH0 7
#define MIPI_SWAP_CH1 6
#define MIPI_SWAP_CH2 5
#define MIPI_SWAP_CH3 4
#define MIPI_SWAP_CLK 3
/* Bit[2:0] are reserved */
/******** END of I2C Address 0x84 *********/
/* DPCD regs */
#define DPCD_DPCD_REV 0x00
#define DPCD_MAX_LINK_RATE 0x01
#define DPCD_MAX_LANE_COUNT 0x02
/********* ANX7625 Register End **********/
/***************** Display *****************/
enum audio_fs {
AUDIO_FS_441K = 0x00,
AUDIO_FS_48K = 0x02,
AUDIO_FS_32K = 0x03,
AUDIO_FS_882K = 0x08,
AUDIO_FS_96K = 0x0a,
AUDIO_FS_1764K = 0x0c,
AUDIO_FS_192K = 0x0e
};
enum audio_wd_len {
AUDIO_W_LEN_16_20MAX = 0x02,
AUDIO_W_LEN_18_20MAX = 0x04,
AUDIO_W_LEN_17_20MAX = 0x0c,
AUDIO_W_LEN_19_20MAX = 0x08,
AUDIO_W_LEN_20_20MAX = 0x0a,
AUDIO_W_LEN_20_24MAX = 0x03,
AUDIO_W_LEN_22_24MAX = 0x05,
AUDIO_W_LEN_21_24MAX = 0x0d,
AUDIO_W_LEN_23_24MAX = 0x09,
AUDIO_W_LEN_24_24MAX = 0x0b
};
#define I2S_CH_2 0x01
#define TDM_CH_4 0x03
#define TDM_CH_6 0x05
#define TDM_CH_8 0x07
#define MAX_DPCD_BUFFER_SIZE 16
#define ONE_BLOCK_SIZE 128
#define FOUR_BLOCK_SIZE (128 * 4)
#define MAX_EDID_BLOCK 3
#define EDID_TRY_CNT 3
#define SUPPORT_PIXEL_CLOCK 300000
struct s_edid_data {
int edid_block_num;
u8 edid_raw_data[FOUR_BLOCK_SIZE];
};
/***************** Display End *****************/
struct anx7625_platform_data {
struct gpio_desc *gpio_p_on;
struct gpio_desc *gpio_reset;
struct regulator_bulk_data supplies[3];
struct drm_bridge *panel_bridge;
int intp_irq;
u32 low_power_mode;
struct device_node *mipi_host_node;
};
struct anx7625_i2c_client {
struct i2c_client *tx_p0_client;
struct i2c_client *tx_p1_client;
struct i2c_client *tx_p2_client;
struct i2c_client *rx_p0_client;
struct i2c_client *rx_p1_client;
struct i2c_client *rx_p2_client;
struct i2c_client *tcpc_client;
};
struct anx7625_data {
struct anx7625_platform_data pdata;
int hpd_status;
int hpd_high_cnt;
/* Lock for work queue */
struct mutex lock;
struct i2c_client *client;
struct anx7625_i2c_client i2c;
struct i2c_client *last_client;
struct s_edid_data slimport_edid_p;
struct work_struct work;
struct workqueue_struct *workqueue;
char edid_block;
struct display_timing dt;
u8 display_timing_valid;
struct drm_bridge bridge;
u8 bridge_attached;
struct mipi_dsi_device *dsi;
};
#endif /* __ANX7625_H__ */
|
