blob: d08faa46a0aef5b9e5e49a1761145ddaec9e175a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/*
* arch/ppc/platforms/ebony.h
*
* Ebony board definitions
*
* Matt Porter <mporter@mvista.com>
*
* Copyright 2002 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __ASM_EBONY_H__
#define __ASM_EBONY_H__
#include <linux/config.h>
#include <platforms/4xx/ibm440gp.h>
/* F/W TLB mapping used in bootloader glue to reset EMAC */
#define PPC44x_EMAC0_MR0 0xE0000800
/* Where to find the MAC info */
#define EBONY_OPENBIOS_MAC_BASE 0xfffffe0c
#define EBONY_OPENBIOS_MAC_OFFSET 0x0c
/* Default clock rates for Rev. B and Rev. C silicon */
#define EBONY_440GP_RB_SYSCLK 33000000
#define EBONY_440GP_RC_SYSCLK 400000000
/* RTC/NVRAM location */
#define EBONY_RTC_ADDR 0x0000000148000000ULL
#define EBONY_RTC_SIZE 0x2000
/* Flash */
#define EBONY_FPGA_ADDR 0x0000000148300000ULL
#define EBONY_BOOT_SMALL_FLASH(x) (x & 0x20)
#define EBONY_ONBRD_FLASH_EN(x) (x & 0x02)
#define EBONY_FLASH_SEL(x) (x & 0x01)
#define EBONY_SMALL_FLASH_LOW1 0x00000001ff800000ULL
#define EBONY_SMALL_FLASH_LOW2 0x00000001ff880000ULL
#define EBONY_SMALL_FLASH_HIGH1 0x00000001fff00000ULL
#define EBONY_SMALL_FLASH_HIGH2 0x00000001fff80000ULL
#define EBONY_SMALL_FLASH_SIZE 0x80000
#define EBONY_LARGE_FLASH_LOW 0x00000001ff800000ULL
#define EBONY_LARGE_FLASH_HIGH 0x00000001ffc00000ULL
#define EBONY_LARGE_FLASH_SIZE 0x400000
#define EBONY_SMALL_FLASH_BASE 0x00000001fff80000ULL
#define EBONY_LARGE_FLASH_BASE 0x00000001ff800000ULL
/*
* Serial port defines
*/
#if defined(__BOOTER__)
/* OpenBIOS defined UART mappings, used by bootloader shim */
#define UART0_IO_BASE 0xE0000200
#define UART1_IO_BASE 0xE0000300
#else
/* head_44x.S created UART mapping, used before early_serial_setup.
* We cannot use default OpenBIOS UART mappings because they
* don't work for configurations with more than 512M RAM. --ebs
*/
#define UART0_IO_BASE 0xF0000200
#define UART1_IO_BASE 0xF0000300
#endif
/* external Epson SG-615P */
#define BASE_BAUD 691200
#define STD_UART_OP(num) \
{ 0, BASE_BAUD, 0, UART##num##_INT, \
(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
iomem_base: (void*)UART##num##_IO_BASE, \
io_type: SERIAL_IO_MEM},
#define SERIAL_PORT_DFNS \
STD_UART_OP(0) \
STD_UART_OP(1)
/* PCI support */
#define EBONY_PCI_LOWER_IO 0x00000000
#define EBONY_PCI_UPPER_IO 0x0000ffff
#define EBONY_PCI_LOWER_MEM 0x80002000
#define EBONY_PCI_UPPER_MEM 0xffffefff
#define EBONY_PCI_CFGREGS_BASE 0x000000020ec00000
#define EBONY_PCI_CFGA_PLB32 0x0ec00000
#define EBONY_PCI_CFGD_PLB32 0x0ec00004
#define EBONY_PCI_IO_BASE 0x0000000208000000ULL
#define EBONY_PCI_IO_SIZE 0x00010000
#define EBONY_PCI_MEM_OFFSET 0x00000000
#endif /* __ASM_EBONY_H__ */
#endif /* __KERNEL__ */
|
