1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
|
/*
* Keymile kmcent2 Device Tree Source, based on T1040RDB DTS
*
* (C) Copyright 2016
* Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "t104xsi-pre.dtsi"
/ {
model = "keymile,kmcent2";
compatible = "keymile,kmcent2";
aliases {
front_phy = &front_phy;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x04000000
1 0 0xf 0xfa000000 0x00010000
2 0 0xf 0xfb000000 0x00010000
4 0 0xf 0xc0000000 0x08000000
6 0 0xf 0xd0000000 0x08000000
7 0 0xf 0xd8000000 0x08000000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x04000000>;
bank-width = <2>;
device-width = <2>;
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
};
board-control@2,0 {
compatible = "keymile,qriox";
reg = <0x2 0x0 0x80>;
};
chassis-mgmt@6,0 {
compatible = "keymile,bfticu";
reg = <6 0 0x100>;
interrupt-controller;
interrupt-parent = <&mpic>;
interrupts = <11 1 0 0>;
#interrupt-cells = <1>;
};
};
memory {
device_type = "memory";
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
network-clock@1 {
compatible = "zarlink,zl30364";
reg = <1>;
spi-max-frequency = <1000000>;
};
};
sdhc@114000 {
status = "disabled";
};
i2c@118000 {
clock-frequency = <100000>;
mux@70 {
compatible = "nxp,pca9547";
reg = <0x70>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
eeprom@54 {
compatible = "24c02";
reg = <0x54>;
pagesize = <2>;
read-only;
label = "ddr3-spd";
};
};
i2c@7 {
reg = <7>;
#address-cells = <1>;
#size-cells = <0>;
temp-sensor@48 {
compatible = "national,lm75";
reg = <0x48>;
label = "SENSOR_0";
};
temp-sensor@4a {
compatible = "national,lm75";
reg = <0x4a>;
label = "SENSOR_2";
};
temp-sensor@4b {
compatible = "national,lm75";
reg = <0x4b>;
label = "SENSOR_3";
};
};
};
};
i2c@118100 {
clock-frequency = <100000>;
eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
pagesize = <16>;
};
eeprom@54 {
compatible = "atmel,24c08";
reg = <0x54>;
pagesize = <16>;
};
};
i2c@119000 {
status = "disabled";
};
i2c@119100 {
status = "disabled";
};
serial2: serial@11d500 {
status = "disabled";
};
serial3: serial@11d600 {
status = "disabled";
};
usb0: usb@210000 {
status = "disabled";
};
usb1: usb@211000 {
status = "disabled";
};
display@180000 {
status = "disabled";
};
sata@220000 {
status = "disabled";
};
sata@221000 {
status = "disabled";
};
fman@400000 {
ethernet@e0000 {
fixed-link = <0 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e2000 {
fixed-link = <1 1 1000 0 0>;
phy-connection-type = "sgmii";
};
ethernet@e4000 {
status = "disabled";
};
ethernet@e6000 {
status = "disabled";
};
ethernet@e8000 {
phy-handle = <&front_phy>;
phy-connection-type = "rgmii";
};
mdio0: mdio@fc000 {
front_phy: ethernet-phy@11 {
reg = <0x11>;
};
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
status = "disabled";
};
pci2: pcie@ffe260000 {
status = "disabled";
};
pci3: pcie@ffe270000 {
status = "disabled";
};
qe: qe@ffe140000 {
ranges = <0x0 0xf 0xfe140000 0x40000>;
reg = <0xf 0xfe140000 0 0x480>;
brg-frequency = <0>;
bus-frequency = <0>;
si1: si@700 {
compatible = "fsl,t1040-qe-si";
reg = <0x700 0x80>;
};
siram1: siram@1000 {
compatible = "fsl,t1040-qe-siram";
reg = <0x1000 0x800>;
};
ucc_hdlc: ucc@2000 {
device_type = "hdlc";
compatible = "fsl,ucc-hdlc";
rx-clock-name = "clk9";
tx-clock-name = "clk9";
fsl,tx-timeslot-mask = <0xfffffffe>;
fsl,rx-timeslot-mask = <0xfffffffe>;
fsl,siram-entry-id = <0>;
};
};
};
#include "t1040si-post.dtsi"
|
