1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
|
* Texas Instruments CPSW ethernet driver
Multiqueue & CBS & MQPRIO
=====================================================================
=====================================================================
The cpsw has 3 CBS shapers for each external ports. This document
describes MQPRIO and CBS Qdisc offload configuration for cpsw driver
based on examples. It potentially can be used in audio video bridging
(AVB) and time sensitive networking (TSN).
The following examples were tested on AM572x EVM and BBB boards.
Test setup
==========
Under consideration two examples with AM572x EVM running cpsw driver
in dual_emac mode.
Several prerequisites:
- TX queues must be rated starting from txq0 that has highest priority
- Traffic classes are used starting from 0, that has highest priority
- CBS shapers should be used with rated queues
- The bandwidth for CBS shapers has to be set a little bit more then
potential incoming rate, thus, rate of all incoming tx queues has
to be a little less
- Real rates can differ, due to discreetness
- Map skb-priority to txq is not enough, also skb-priority to l2 prio
map has to be created with ip or vconfig tool
- Any l2/socket prio (0 - 7) for classes can be used, but for
simplicity default values are used: 3 and 2
- only 2 classes tested: A and B, but checked and can work with more,
maximum allowed 4, but only for 3 rate can be set.
Test setup for examples
=======================
+-------------------------------+
|--+ |
| | Workstation0 |
|E | MAC 18:03:73:66:87:42 |
+-----------------------------+ +--|t | |
| | 1 | E | | |h |./tsn_listener -d \ |
| Target board: | 0 | t |--+ |0 | 18:03:73:66:87:42 -i eth0 \|
| AM572x EVM | 0 | h | | | -s 1500 |
| | 0 | 0 | |--+ |
| Only 2 classes: |Mb +---| +-------------------------------+
| class A, class B | |
| | +---| +-------------------------------+
| | 1 | E | |--+ |
| | 0 | t | | | Workstation1 |
| | 0 | h |--+ |E | MAC 20:cf:30:85:7d:fd |
| |Mb | 1 | +--|t | |
+-----------------------------+ |h |./tsn_listener -d \ |
|0 | 20:cf:30:85:7d:fd -i eth0 \|
| | -s 1500 |
|--+ |
+-------------------------------+
*********************************************************************
*********************************************************************
*********************************************************************
Example 1: One port tx AVB configuration scheme for target board
----------------------------------------------------------------------
(prints and scheme for AM572x evm, applicable for single port boards)
tc - traffic class
txq - transmit queue
p - priority
f - fifo (cpsw fifo)
S - shaper configured
+------------------------------------------------------------------+ u
| +---------------+ +---------------+ +------+ +------+ | s
| | | | | | | | | | e
| | App 1 | | App 2 | | Apps | | Apps | | r
| | Class A | | Class B | | Rest | | Rest | |
| | Eth0 | | Eth0 | | Eth0 | | Eth1 | | s
| | VLAN100 | | VLAN100 | | | | | | | | p
| | 40 Mb/s | | 20 Mb/s | | | | | | | | a
| | SO_PRIORITY=3 | | SO_PRIORITY=2 | | | | | | | | c
| | | | | | | | | | | | | | e
| +---|-----------+ +---|-----------+ +---|--+ +---|--+ |
+-----|------------------|------------------|--------|-------------+
+-+ +------------+ | |
| | +-----------------+ +--+
| | | |
+---|-------|-------------|-----------------------|----------------+
| +----+ +----+ +----+ +----+ +----+ |
| | p3 | | p2 | | p1 | | p0 | | p0 | | k
| \ / \ / \ / \ / \ / | e
| \ / \ / \ / \ / \ / | r
| \/ \/ \/ \/ \/ | n
| | | | | | e
| | | +-----+ | | l
| | | | | |
| +----+ +----+ +----+ +----+ | s
| |tc0 | |tc1 | |tc2 | |tc0 | | p
| \ / \ / \ / \ / | a
| \ / \ / \ / \ / | c
| \/ \/ \/ \/ | e
| | | +-----+ | |
| | | | | | |
| | | | | | |
| | | | | | |
| +----+ +----+ +----+ +----+ +----+ |
| |txq0| |txq1| |txq2| |txq3| |txq4| |
| \ / \ / \ / \ / \ / |
| \ / \ / \ / \ / \ / |
| \/ \/ \/ \/ \/ |
| +-|------|------|------|--+ +--|--------------+ |
| | | | | | | Eth0.100 | | Eth1 | |
+---|------|------|------|------------------------|----------------+
| | | | |
p p p p |
3 2 0-1, 4-7 <- L2 priority |
| | | | |
| | | | |
+---|------|------|------|------------------------|----------------+
| | | | | |----------+ |
| +----+ +----+ +----+ +----+ +----+ |
| |dma7| |dma6| |dma5| |dma4| |dma3| |
| \ / \ / \ / \ / \ / | c
| \S / \S / \ / \ / \ / | p
| \/ \/ \/ \/ \/ | s
| | | | +----- | | w
| | | | | | |
| | | | | | | d
| +----+ +----+ +----+p p+----+ | r
| | | | | | |o o| | | i
| | f3 | | f2 | | f0 |r r| f0 | | v
| |tc0 | |tc1 | |tc2 |t t|tc0 | | e
| \CBS / \CBS / \CBS /1 2\CBS / | r
| \S / \S / \ / \ / |
| \/ \/ \/ \/ |
+------------------------------------------------------------------+
========================================Eth==========================>
1)
// Add 4 tx queues, for interface Eth0, and 1 tx queue for Eth1
$ ethtool -L eth0 rx 1 tx 5
rx unmodified, ignoring
2)
// Check if num of queues is set correctly:
$ ethtool -l eth0
Channel parameters for eth0:
Pre-set maximums:
RX: 8
TX: 8
Other: 0
Combined: 0
Current hardware settings:
RX: 1
TX: 5
Other: 0
Combined: 0
3)
// TX queues must be rated starting from 0, so set bws for tx0 and tx1
// Set rates 40 and 20 Mb/s appropriately.
// Pay attention, real speed can differ a bit due to discreetness.
// Leave last 2 tx queues not rated.
$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
4)
// Check maximum rate of tx (cpdma) queues:
$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
40
20
0
0
0
5)
// Map skb->priority to traffic class:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq2, txq3)
$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 1
5a)
// As two interface sharing same set of tx queues, assign all traffic
// coming to interface Eth1 to separate queue in order to not mix it
// with traffic from interface Eth0, so use separate txq to send
// packets to Eth1, so all prio -> tc0 and tc0 -> txq4
// Here hw 0, so here still default configuration for eth1 in hw
$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 1 \
map 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 queues 1@4 hw 0
6)
// Check classes settings
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| +---(100:3) mqprio
| +---(100:4) mqprio
|
+---(100:ffe1) mqprio
| +---(100:2) mqprio
|
+---(100:ffe0) mqprio
+---(100:1) mqprio
$ tc -g class show dev eth1
+---(100:ffe0) mqprio
+---(100:5) mqprio
7)
// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc
// Set it +1 Mb for reserve (important!)
// here only idle slope is important, others arg are ignored
// Pay attention, real speed can differ a bit due to discreetness
$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1438 \
hicredit 62 sendslope -959000 idleslope 41000 offload 1
net eth0: set FIFO3 bw = 50
8)
// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc:
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1468 \
hicredit 65 sendslope -979000 idleslope 21000 offload 1
net eth0: set FIFO2 bw = 30
9)
// Create vlan 100 to map sk->priority to vlan qos
$ ip link add link eth0 name eth0.100 type vlan id 100
8021q: 802.1Q VLAN Support v1.8
8021q: adding VLAN 0 to HW filter on device eth0
8021q: adding VLAN 0 to HW filter on device eth1
net eth0: Adding vlanid 100 to vlan filter
10)
// Map skb->priority to L2 prio, 1 to 1
$ ip link set eth0.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
11)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth0.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
12)
// Run your appropriate tools with socket option "SO_PRIORITY"
// to 3 for class A and/or to 2 for class B
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500&
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500&
13)
// run your listener on workstation (should be in same vlan)
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39000 kbps
14)
// Restore default configuration if needed
$ ip link del eth0.100
$ tc qdisc del dev eth1 root
$ tc qdisc del dev eth0 root
net eth0: Prev FIFO2 is shaped
net eth0: set FIFO3 bw = 0
net eth0: set FIFO2 bw = 0
$ ethtool -L eth0 rx 1 tx 1
*********************************************************************
*********************************************************************
*********************************************************************
Example 2: Two port tx AVB configuration scheme for target board
----------------------------------------------------------------------
(prints and scheme for AM572x evm, for dual emac boards only)
+------------------------------------------------------------------+ u
| +----------+ +----------+ +------+ +----------+ +----------+ | s
| | | | | | | | | | | | e
| | App 1 | | App 2 | | Apps | | App 3 | | App 4 | | r
| | Class A | | Class B | | Rest | | Class B | | Class A | |
| | Eth0 | | Eth0 | | | | | Eth1 | | Eth1 | | s
| | VLAN100 | | VLAN100 | | | | | VLAN100 | | VLAN100 | | p
| | 40 Mb/s | | 20 Mb/s | | | | | 10 Mb/s | | 30 Mb/s | | a
| | SO_PRI=3 | | SO_PRI=2 | | | | | SO_PRI=3 | | SO_PRI=2 | | c
| | | | | | | | | | | | | | | | | e
| +---|------+ +---|------+ +---|--+ +---|------+ +---|------+ |
+-----|-------------|-------------|---------|-------------|--------+
+-+ +-------+ | +----------+ +----+
| | +-------+------+ | |
| | | | | |
+---|-------|-------------|--------------|-------------|-------|---+
| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ |
| | p3 | | p2 | | p1 | | p0 | | p0 | | p1 | | p2 | | p3 | | k
| \ / \ / \ / \ / \ / \ / \ / \ / | e
| \ / \ / \ / \ / \ / \ / \ / \ / | r
| \/ \/ \/ \/ \/ \/ \/ \/ | n
| | | | | | | | e
| | | +----+ +----+ | | | l
| | | | | | | |
| +----+ +----+ +----+ +----+ +----+ +----+ | s
| |tc0 | |tc1 | |tc2 | |tc2 | |tc1 | |tc0 | | p
| \ / \ / \ / \ / \ / \ / | a
| \ / \ / \ / \ / \ / \ / | c
| \/ \/ \/ \/ \/ \/ | e
| | | +-----+ +-----+ | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | E E | | | | |
| +----+ +----+ +----+ +----+ t t +----+ +----+ +----+ +----+ |
| |txq0| |txq1| |txq4| |txq5| h h |txq6| |txq7| |txq3| |txq2| |
| \ / \ / \ / \ / 0 1 \ / \ / \ / \ / |
| \ / \ / \ / \ / . . \ / \ / \ / \ / |
| \/ \/ \/ \/ 1 1 \/ \/ \/ \/ |
| +-|------|------|------|--+ 0 0 +-|------|------|------|--+ |
| | | | | | | 0 0 | | | | | | |
+---|------|------|------|---------------|------|------|------|----+
| | | | | | | |
p p p p p p p p
3 2 0-1, 4-7 <-L2 pri-> 0-1, 4-7 2 3
| | | | | | | |
| | | | | | | |
+---|------|------|------|---------------|------|------|------|----+
| | | | | | | | | |
| +----+ +----+ +----+ +----+ +----+ +----+ +----+ +----+ |
| |dma7| |dma6| |dma3| |dma2| |dma1| |dma0| |dma4| |dma5| |
| \ / \ / \ / \ / \ / \ / \ / \ / | c
| \S / \S / \ / \ / \ / \ / \S / \S / | p
| \/ \/ \/ \/ \/ \/ \/ \/ | s
| | | | +----- | | | | | w
| | | | | +----+ | | | |
| | | | | | | | | | d
| +----+ +----+ +----+p p+----+ +----+ +----+ | r
| | | | | | |o o| | | | | | | i
| | f3 | | f2 | | f0 |r CPSW r| f3 | | f2 | | f0 | | v
| |tc0 | |tc1 | |tc2 |t t|tc0 | |tc1 | |tc2 | | e
| \CBS / \CBS / \CBS /1 2\CBS / \CBS / \CBS / | r
| \S / \S / \ / \S / \S / \ / |
| \/ \/ \/ \/ \/ \/ |
+------------------------------------------------------------------+
========================================Eth==========================>
1)
// Add 8 tx queues, for interface Eth0, but they are common, so are accessed
// by two interfaces Eth0 and Eth1.
$ ethtool -L eth1 rx 1 tx 8
rx unmodified, ignoring
2)
// Check if num of queues is set correctly:
$ ethtool -l eth0
Channel parameters for eth0:
Pre-set maximums:
RX: 8
TX: 8
Other: 0
Combined: 0
Current hardware settings:
RX: 1
TX: 8
Other: 0
Combined: 0
3)
// TX queues must be rated starting from 0, so set bws for tx0 and tx1 for Eth0
// and for tx2 and tx3 for Eth1. That is, rates 40 and 20 Mb/s appropriately
// for Eth0 and 30 and 10 Mb/s for Eth1.
// Real speed can differ a bit due to discreetness
// Leave last 4 tx queues as not rated
$ echo 40 > /sys/class/net/eth0/queues/tx-0/tx_maxrate
$ echo 20 > /sys/class/net/eth0/queues/tx-1/tx_maxrate
$ echo 30 > /sys/class/net/eth1/queues/tx-2/tx_maxrate
$ echo 10 > /sys/class/net/eth1/queues/tx-3/tx_maxrate
4)
// Check maximum rate of tx (cpdma) queues:
$ cat /sys/class/net/eth0/queues/tx-*/tx_maxrate
40
20
30
10
0
0
0
0
5)
// Map skb->priority to traffic class for Eth0:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq0, tc1 -> txq1, tc2 -> (txq4, txq5)
$ tc qdisc replace dev eth0 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@4 hw 1
6)
// Check classes settings
$ tc -g class show dev eth0
+---(100:ffe2) mqprio
| +---(100:5) mqprio
| +---(100:6) mqprio
|
+---(100:ffe1) mqprio
| +---(100:2) mqprio
|
+---(100:ffe0) mqprio
+---(100:1) mqprio
7)
// Set rate for class A - 41 Mbit (tc0, txq0) using CBS Qdisc for Eth0
// here only idle slope is important, others ignored
// Real speed can differ a bit due to discreetness
$ tc qdisc add dev eth0 parent 100:1 cbs locredit -1470 \
hicredit 62 sendslope -959000 idleslope 41000 offload 1
net eth0: set FIFO3 bw = 50
8)
// Set rate for class B - 21 Mbit (tc1, txq1) using CBS Qdisc for Eth0
$ tc qdisc add dev eth0 parent 100:2 cbs locredit -1470 \
hicredit 65 sendslope -979000 idleslope 21000 offload 1
net eth0: set FIFO2 bw = 30
9)
// Create vlan 100 to map sk->priority to vlan qos for Eth0
$ ip link add link eth0 name eth0.100 type vlan id 100
net eth0: Adding vlanid 100 to vlan filter
10)
// Map skb->priority to L2 prio for Eth0.100, one to one
$ ip link set eth0.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
11)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth0.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
12)
// Map skb->priority to traffic class for Eth1:
// 3pri -> tc0, 2pri -> tc1, (0,1,4-7)pri -> tc2
// Map traffic class to transmit queue:
// tc0 -> txq2, tc1 -> txq3, tc2 -> (txq6, txq7)
$ tc qdisc replace dev eth1 handle 100: parent root mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@2 1@3 2@6 hw 1
13)
// Check classes settings
$ tc -g class show dev eth1
+---(100:ffe2) mqprio
| +---(100:7) mqprio
| +---(100:8) mqprio
|
+---(100:ffe1) mqprio
| +---(100:4) mqprio
|
+---(100:ffe0) mqprio
+---(100:3) mqprio
14)
// Set rate for class A - 31 Mbit (tc0, txq2) using CBS Qdisc for Eth1
// here only idle slope is important, others ignored, but calculated
// for interface speed - 100Mb for eth1 port.
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth1 parent 100:3 cbs locredit -1035 \
hicredit 465 sendslope -69000 idleslope 31000 offload 1
net eth1: set FIFO3 bw = 31
15)
// Set rate for class B - 11 Mbit (tc1, txq3) using CBS Qdisc for Eth1
// Set it +1 Mb for reserve (important!)
$ tc qdisc add dev eth1 parent 100:4 cbs locredit -1335 \
hicredit 405 sendslope -89000 idleslope 11000 offload 1
net eth1: set FIFO2 bw = 11
16)
// Create vlan 100 to map sk->priority to vlan qos for Eth1
$ ip link add link eth1 name eth1.100 type vlan id 100
net eth1: Adding vlanid 100 to vlan filter
17)
// Map skb->priority to L2 prio for Eth1.100, one to one
$ ip link set eth1.100 type vlan \
egress 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
18)
// Check egress map for vlan 100
$ cat /proc/net/vlan/eth1.100
[...]
INGRESS priority mappings: 0:0 1:0 2:0 3:0 4:0 5:0 6:0 7:0
EGRESS priority mappings: 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
19)
// Run appropriate tools with socket option "SO_PRIORITY" to 3
// for class A and to 2 for class B. For both interfaces
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p2 -s 1500&
./tsn_talker -d 18:03:73:66:87:42 -i eth0.100 -p3 -s 1500&
./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p2 -s 1500&
./tsn_talker -d 20:cf:30:85:7d:fd -i eth1.100 -p3 -s 1500&
20)
// run your listener on workstation (should be in same vlan)
// (I took at https://www.spinics.net/lists/netdev/msg460869.html)
./tsn_listener -d 18:03:73:66:87:42 -i enp5s0 -s 1500
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39012 kbps
Receiving data rate: 39000 kbps
21)
// Restore default configuration if needed
$ ip link del eth1.100
$ ip link del eth0.100
$ tc qdisc del dev eth1 root
net eth1: Prev FIFO2 is shaped
net eth1: set FIFO3 bw = 0
net eth1: set FIFO2 bw = 0
$ tc qdisc del dev eth0 root
net eth0: Prev FIFO2 is shaped
net eth0: set FIFO3 bw = 0
net eth0: set FIFO2 bw = 0
$ ethtool -L eth0 rx 1 tx 1
|
