blob: 499129e118970d3fd22c053d2a92d03aabfbde5c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
|
Kernel driver ltc2978
=====================
Supported chips:
* Linear Technology LTC2978
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
Author: Guenter Roeck <guenter.roeck@ericsson.com>
Description
-----------
The LTC2978 is an octal power supply monitor, supervisor, sequencer and
margin controller.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an LTC2978 at address
0x60 on I2C bus #1:
# modprobe ltc2978
# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs attributes
----------------
in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
in1_lcrit Critical minimum input voltage.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
in1_lcrit_alarm Input voltage critical low alarm.
in1_crit_alarm Input voltage critical high alarm.
in1_lowest Lowest input voltage.
in1_highest Highest input voltage.
in1_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
in[2-9]_label "vout[1-8]".
in[2-9]_input Measured output voltage.
in[2-9]_min Minimum output voltage.
in[2-9]_max Maximum output voltage.
in[2-9]_lcrit Critical minimum output voltage.
in[2-9]_crit Critical maximum output voltage.
in[2-9]_min_alarm Output voltage low alarm.
in[2-9]_max_alarm Output voltage high alarm.
in[2-9]_lcrit_alarm Output voltage critical low alarm.
in[2-9]_crit_alarm Output voltage critical high alarm.
in[2-9]_lowest Lowest output voltage.
in[2-9]_highest Lowest output voltage.
in[2-9]_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
temp1_input Measured temperature.
temp1_min Mimimum temperature.
temp1_max Maximum temperature.
temp1_lcrit Critical low temperature.
temp1_crit Critical high temperature.
temp1_min_alarm Chip temperature low alarm.
temp1_max_alarm Chip temperature high alarm.
temp1_lcrit_alarm Chip temperature critical low alarm.
temp1_crit_alarm Chip temperature critical high alarm.
temp1_lowest Lowest measured temperature.
temp1_highest Highest measured temperature.
temp1_reset_history Reset history. Writing into this attribute will reset
history for all attributes.
|
