1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
=============
Core elements
=============
The Industrial I/O core offers a unified framework for writing drivers for
many different types of embedded sensors. a standard interface to user space
applications manipulating sensors. The implementation can be found under
:file:`drivers/iio/industrialio-*`
Industrial I/O Devices
----------------------
* struct :c:type:`iio_dev` - industrial I/O device
* :c:func:`iio_device_alloc()` - alocate an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_free()` - free an :c:type:`iio_dev` from a driver
* :c:func:`iio_device_register()` - register a device with the IIO subsystem
* :c:func:`iio_device_unregister()` - unregister a device from the IIO
subsystem
An IIO device usually corresponds to a single hardware sensor and it
provides all the information needed by a driver handling a device.
Let's first have a look at the functionality embedded in an IIO device
then we will show how a device driver makes use of an IIO device.
There are two ways for a user space application to interact with an IIO driver.
1. :file:`/sys/bus/iio/iio:device{X}/`, this represents a hardware sensor
and groups together the data channels of the same chip.
2. :file:`/dev/iio:device{X}`, character device node interface used for
buffered data transfer and for events information retrieval.
A typical IIO driver will register itself as an :doc:`I2C <../i2c>` or
:doc:`SPI <../spi>` driver and will create two routines, probe and remove.
At probe:
1. Call :c:func:`iio_device_alloc()`, which allocates memory for an IIO device.
2. Initialize IIO device fields with driver specific information (e.g.
device name, device channels).
3. Call :c:func:`iio_device_register()`, this registers the device with the
IIO core. After this call the device is ready to accept requests from user
space applications.
At remove, we free the resources allocated in probe in reverse order:
1. :c:func:`iio_device_unregister()`, unregister the device from the IIO core.
2. :c:func:`iio_device_free()`, free the memory allocated for the IIO device.
IIO device sysfs interface
==========================
Attributes are sysfs files used to expose chip info and also allowing
applications to set various configuration parameters. For device with
index X, attributes can be found under /sys/bus/iio/iio:deviceX/ directory.
Common attributes are:
* :file:`name`, description of the physical chip.
* :file:`dev`, shows the major:minor pair associated with
:file:`/dev/iio:deviceX` node.
* :file:`sampling_frequency_available`, available discrete set of sampling
frequency values for device.
* Available standard attributes for IIO devices are described in the
:file:`Documentation/ABI/testing/sysfs-bus-iio` file in the Linux kernel
sources.
IIO device channels
===================
struct :c:type:`iio_chan_spec` - specification of a single channel
An IIO device channel is a representation of a data channel. An IIO device can
have one or multiple channels. For example:
* a thermometer sensor has one channel representing the temperature measurement.
* a light sensor with two channels indicating the measurements in the visible
and infrared spectrum.
* an accelerometer can have up to 3 channels representing acceleration on X, Y
and Z axes.
An IIO channel is described by the struct :c:type:`iio_chan_spec`.
A thermometer driver for the temperature sensor in the example above would
have to describe its channel as follows::
static const struct iio_chan_spec temp_channel[] = {
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
},
};
Channel sysfs attributes exposed to userspace are specified in the form of
bitmasks. Depending on their shared info, attributes can be set in one of the
following masks:
* **info_mask_separate**, attributes will be specific to
this channel
* **info_mask_shared_by_type**, attributes are shared by all channels of the
same type
* **info_mask_shared_by_dir**, attributes are shared by all channels of the same
direction
* **info_mask_shared_by_all**, attributes are shared by all channels
When there are multiple data channels per channel type we have two ways to
distinguish between them:
* set **.modified** field of :c:type:`iio_chan_spec` to 1. Modifiers are
specified using **.channel2** field of the same :c:type:`iio_chan_spec`
structure and are used to indicate a physically unique characteristic of the
channel such as its direction or spectral response. For example, a light
sensor can have two channels, one for infrared light and one for both
infrared and visible light.
* set **.indexed** field of :c:type:`iio_chan_spec` to 1. In this case the
channel is simply another instance with an index specified by the **.channel**
field.
Here is how we can make use of the channel's modifiers::
static const struct iio_chan_spec light_channels[] = {
{
.type = IIO_INTENSITY,
.modified = 1,
.channel2 = IIO_MOD_LIGHT_IR,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
},
{
.type = IIO_INTENSITY,
.modified = 1,
.channel2 = IIO_MOD_LIGHT_BOTH,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
},
{
.type = IIO_LIGHT,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
.info_mask_shared = BIT(IIO_CHAN_INFO_SAMP_FREQ),
},
}
This channel's definition will generate two separate sysfs files for raw data
retrieval:
* :file:`/sys/bus/iio/iio:device{X}/in_intensity_ir_raw`
* :file:`/sys/bus/iio/iio:device{X}/in_intensity_both_raw`
one file for processed data:
* :file:`/sys/bus/iio/iio:device{X}/in_illuminance_input`
and one shared sysfs file for sampling frequency:
* :file:`/sys/bus/iio/iio:device{X}/sampling_frequency`.
Here is how we can make use of the channel's indexing::
static const struct iio_chan_spec light_channels[] = {
{
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
},
{
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
},
}
This will generate two separate attributes files for raw data retrieval:
* :file:`/sys/bus/iio/devices/iio:device{X}/in_voltage0_raw`, representing
voltage measurement for channel 0.
* :file:`/sys/bus/iio/devices/iio:device{X}/in_voltage1_raw`, representing
voltage measurement for channel 1.
More details
============
.. kernel-doc:: include/linux/iio/iio.h
.. kernel-doc:: drivers/iio/industrialio-core.c
:export:
|
