blob: 2d1bef16f1492a9c7699e84dd306b2694ff6aafe (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
TI Keystone Soc USB Controller
DWC3 GLUE
Required properties:
- compatible: should be "ti,keystone-dwc3".
- #address-cells, #size-cells : should be '1' if the device has sub-nodes
with 'reg' property.
- reg : Address and length of the register set for the USB subsystem on
the SOC.
- interrupts : The irq number of this device that is used to interrupt the
MPU.
- ranges: allows valid 1:1 translation between child's address space and
parent's address space.
SoC-specific Required Properties:
The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
SoCs only:
- clocks: Clock ID for USB functional clock.
- clock-names: Must be "usb".
The following are mandatory properties for Keystone 2 66AK2G SoCs only:
- power-domains: Should contain a phandle to a PM domain provider node
and an args specifier containing the USB device id
value. This property is as per the binding,
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
Sub-nodes:
The dwc3 core should be added as subnode to Keystone DWC3 glue.
- dwc3 :
The binding details of dwc3 can be found in:
Documentation/devicetree/bindings/usb/dwc3.txt
Example:
usb: usb@2680000 {
compatible = "ti,keystone-dwc3";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x2680000 0x10000>;
clocks = <&clkusb>;
clock-names = "usb";
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
ranges;
status = "disabled";
dwc3@2690000 {
compatible = "synopsys,dwc3";
reg = <0x2690000 0x70000>;
interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
usb-phy = <&usb_phy>, <&usb_phy>;
};
};
|
