blob: fdf5caa6229b4fffe95853e061e9c62c83307364 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
|
* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
sensors (THS) which are the analog circuits for measuring temperature (Tj)
inside the LSI.
Required properties:
- compatible : "renesas,<soctype>-thermal",
Examples with soctypes are:
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
TSC1, TSC2, ...
- clocks : Must contain a reference to the functional clock.
- #thermal-sensor-cells : must be <1>.
Optional properties:
- interrupts : interrupts routed to the TSC (3 for H3 and M3-W)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
Example:
tsc: thermal@e6198000 {
compatible = "renesas,r8a7795-thermal";
reg = <0 0xe6198000 0 0x68>,
<0 0xe61a0000 0 0x5c>,
<0 0xe61a8000 0 0x5c>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 522>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
#thermal-sensor-cells = <1>;
};
thermal-zones {
sensor_thermal1: sensor-thermal1 {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
trips {
sensor1_crit: sensor1-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
|
