blob: 79e10a05a96ac94687faee98693b3b5dbc6e0343 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
|
* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
Required properties:
- compatible: Should be one of the following:
- "maxim,max3107" for Maxim MAX3107,
- "maxim,max3108" for Maxim MAX3108,
- "maxim,max3109" for Maxim MAX3109,
- "maxim,max14830" for Maxim MAX14830.
- reg: SPI chip select number.
- interrupts: Specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends on the
parent interrupt controller.
- clocks: phandle to the IC source clock.
- clock-names: Should be "xtal" if clock is an external crystal or
"osc" if an external clock source is used.
Optional properties:
- gpio-controller: Marks the device node as a GPIO controller.
- #gpio-cells: Should be two. The first cell is the GPIO number and
the second cell is used to specify the GPIO polarity:
0 = active high,
1 = active low.
Example:
/ {
clocks {
spi_uart_clk: osc_max14830 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <3686400>;
};
};
};
&spi0 {
max14830: max14830@0 {
compatible = "maxim,max14830";
reg = <0>;
clocks = <&spi_uart_clk>;
clock-names = "osc";
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
gpio-controller;
#gpio-cells = <2>;
};
};
|
