1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8192.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Mediatek MT8192 Pin Controller
maintainers:
- Sean Wang <sean.wang@mediatek.com>
description: |
The Mediatek's Pin controller is used to control SoC pins.
properties:
compatible:
const: mediatek,mt8192-pinctrl
gpio-controller: true
'#gpio-cells':
description: |
Number of cells in GPIO specifier. Since the generic GPIO binding is used,
the amount of cells must be specified as 2. See the below
mentioned gpio binding representation for description of particular cells.
const: 2
gpio-ranges:
description: gpio valid number range.
maxItems: 1
gpio-line-names: true
reg:
description: |
Physical address base for gpio base registers. There are 11 GPIO
physical address base in mt8192.
maxItems: 11
reg-names:
description: |
Gpio base register names.
maxItems: 11
interrupt-controller: true
'#interrupt-cells':
const: 2
interrupts:
description: The interrupt outputs to sysirq.
maxItems: 1
# PIN CONFIGURATION NODES
patternProperties:
'-pins$':
type: object
additionalProperties: false
patternProperties:
'^pins':
type: object
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
configuration, pullups, drive strength, input enable/disable and
input schmitt.
$ref: "pinmux-node.yaml"
properties:
pinmux:
description: |
Integer array, represents gpio pin number and mux setting.
Supported pin number and mux varies for different SoCs, and are defined
as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly.
drive-strength:
description: |
It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See
dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192.
enum: [2, 4, 6, 8, 10, 12, 14, 16]
drive-strength-microamp:
enum: [125, 250, 500, 1000]
bias-pull-down:
oneOf:
- type: boolean
description: normal pull down.
- enum: [100, 101, 102, 103]
description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_
defines in dt-bindings/pinctrl/mt65xx.h.
- enum: [200, 201, 202, 203]
description: RSEL pull down type. See MTK_PULL_SET_RSEL_
defines in dt-bindings/pinctrl/mt65xx.h.
bias-pull-up:
oneOf:
- type: boolean
description: normal pull up.
- enum: [100, 101, 102, 103]
description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_
defines in dt-bindings/pinctrl/mt65xx.h.
- enum: [200, 201, 202, 203]
description: RSEL pull up type. See MTK_PULL_SET_RSEL_
defines in dt-bindings/pinctrl/mt65xx.h.
bias-disable: true
output-high: true
output-low: true
input-enable: true
input-disable: true
input-schmitt-enable: true
input-schmitt-disable: true
required:
- pinmux
additionalProperties: false
allOf:
- $ref: "pinctrl.yaml#"
required:
- compatible
- reg
- interrupts
- interrupt-controller
- '#interrupt-cells'
- gpio-controller
- '#gpio-cells'
- gpio-ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/pinctrl/mt8192-pinfunc.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
pio: pinctrl@10005000 {
compatible = "mediatek,mt8192-pinctrl";
reg = <0x10005000 0x1000>,
<0x11c20000 0x1000>,
<0x11d10000 0x1000>,
<0x11d30000 0x1000>,
<0x11d40000 0x1000>,
<0x11e20000 0x1000>,
<0x11e70000 0x1000>,
<0x11ea0000 0x1000>,
<0x11f20000 0x1000>,
<0x11f30000 0x1000>,
<0x1000b000 0x1000>;
reg-names = "iocfg0", "iocfg_rm", "iocfg_bm",
"iocfg_bl", "iocfg_br", "iocfg_lm",
"iocfg_lb", "iocfg_rt", "iocfg_lt",
"iocfg_tl", "eint";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pio 0 0 220>;
interrupt-controller;
interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH 0>;
#interrupt-cells = <2>;
spi1-default-pins {
pins-cs-mosi-clk {
pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
<PINMUX_GPIO159__FUNC_SPI1_A_MO>,
<PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
bias-disable;
};
pins-miso {
pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
bias-pull-down;
};
};
};
|
